mirror of https://gitee.com/openkylin/linux.git
[media] stb6100: Improve tuner performance
- Reduce the amount of white noise present, which causes the demodulator a significant time to acquire a frontend lock on a whole. Frontend shows a large significant improvement in performance. Thanks to Peter Nayler for helping to identify the potential hotspots and fixing them. Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Manu Abraham
Mauro Carvalho Chehab
parent
3037fd1430
commit
f14bfe94e4
|
|
@ -51,7 +51,7 @@ module_param(verbose, int, 0644);
|
|||
if (x > y) \
|
||||
printk(format, ##arg); \
|
||||
} \
|
||||
} while(0)
|
||||
} while (0)
|
||||
|
||||
struct stb6100_lkup {
|
||||
u32 val_low;
|
||||
|
|
@ -157,13 +157,25 @@ static int stb6100_read_reg(struct stb6100_state *state, u8 reg)
|
|||
u8 regs[STB6100_NUMREGS];
|
||||
int rc;
|
||||
|
||||
struct i2c_msg msg = {
|
||||
.addr = state->config->tuner_address + reg,
|
||||
.flags = I2C_M_RD,
|
||||
.buf = regs,
|
||||
.len = 1
|
||||
};
|
||||
|
||||
rc = i2c_transfer(state->i2c, &msg, 1);
|
||||
|
||||
if (unlikely(reg >= STB6100_NUMREGS)) {
|
||||
dprintk(verbose, FE_ERROR, 1, "Invalid register offset 0x%x", reg);
|
||||
return -EINVAL;
|
||||
}
|
||||
if ((rc = stb6100_read_regs(state, regs)) < 0)
|
||||
return rc;
|
||||
return (unsigned int)regs[reg];
|
||||
if (unlikely(verbose > FE_DEBUG)) {
|
||||
dprintk(verbose, FE_DEBUG, 1, " Read from 0x%02x", state->config->tuner_address);
|
||||
dprintk(verbose, FE_DEBUG, 1, " %s: 0x%02x", stb6100_regnames[reg], regs[0]);
|
||||
}
|
||||
|
||||
return (unsigned int)regs[0];
|
||||
}
|
||||
|
||||
static int stb6100_write_reg_range(struct stb6100_state *state, u8 buf[], int start, int len)
|
||||
|
|
@ -211,20 +223,17 @@ static int stb6100_write_reg(struct stb6100_state *state, u8 reg, u8 data)
|
|||
return stb6100_write_reg_range(state, &data, reg, 1);
|
||||
}
|
||||
|
||||
static int stb6100_write_regs(struct stb6100_state *state, u8 regs[])
|
||||
{
|
||||
stb6100_normalise_regs(regs);
|
||||
return stb6100_write_reg_range(state, ®s[1], 1, STB6100_NUMREGS - 1);
|
||||
}
|
||||
|
||||
static int stb6100_get_status(struct dvb_frontend *fe, u32 *status)
|
||||
{
|
||||
int rc;
|
||||
struct stb6100_state *state = fe->tuner_priv;
|
||||
|
||||
if ((rc = stb6100_read_reg(state, STB6100_LD)) < 0)
|
||||
rc = stb6100_read_reg(state, STB6100_LD);
|
||||
if (rc < 0) {
|
||||
dprintk(verbose, FE_ERROR, 1, "%s failed", __func__);
|
||||
return rc;
|
||||
|
||||
}
|
||||
return (rc & STB6100_LD_LOCK) ? TUNER_STATUS_LOCKED : 0;
|
||||
}
|
||||
|
||||
|
|
@ -234,7 +243,8 @@ static int stb6100_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
|
|||
u8 f;
|
||||
struct stb6100_state *state = fe->tuner_priv;
|
||||
|
||||
if ((rc = stb6100_read_reg(state, STB6100_F)) < 0)
|
||||
rc = stb6100_read_reg(state, STB6100_F);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
f = rc & STB6100_F_F;
|
||||
|
||||
|
|
@ -265,14 +275,21 @@ static int stb6100_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth)
|
|||
/* Turn on LPF bandwidth setting clock control,
|
||||
* set bandwidth, wait 10ms, turn off.
|
||||
*/
|
||||
if ((rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d | STB6100_FCCK_FCCK)) < 0)
|
||||
rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d | STB6100_FCCK_FCCK);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
if ((rc = stb6100_write_reg(state, STB6100_F, 0xc0 | tmp)) < 0)
|
||||
rc = stb6100_write_reg(state, STB6100_F, 0xc0 | tmp);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
msleep(1);
|
||||
if ((rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d)) < 0)
|
||||
|
||||
msleep(5); /* This is dangerous as another (related) thread may start */
|
||||
|
||||
rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
msleep(10); /* This is dangerous as another (related) thread may start */
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
@ -284,7 +301,8 @@ static int stb6100_get_frequency(struct dvb_frontend *fe, u32 *frequency)
|
|||
struct stb6100_state *state = fe->tuner_priv;
|
||||
u8 regs[STB6100_NUMREGS];
|
||||
|
||||
if ((rc = stb6100_read_regs(state, regs)) < 0)
|
||||
rc = stb6100_read_regs(state, regs);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
odiv = (regs[STB6100_VCO] & STB6100_VCO_ODIV) >> STB6100_VCO_ODIV_SHIFT;
|
||||
|
|
@ -312,8 +330,7 @@ static int stb6100_set_frequency(struct dvb_frontend *fe, u32 frequency)
|
|||
u8 regs[STB6100_NUMREGS];
|
||||
u8 g, psd2, odiv;
|
||||
|
||||
if ((rc = stb6100_read_regs(state, regs)) < 0)
|
||||
return rc;
|
||||
dprintk(verbose, FE_DEBUG, 1, "Version 2010-8-14 13:51");
|
||||
|
||||
if (fe->ops.get_frontend) {
|
||||
dprintk(verbose, FE_DEBUG, 1, "Get frontend parameters");
|
||||
|
|
@ -321,96 +338,140 @@ static int stb6100_set_frequency(struct dvb_frontend *fe, u32 frequency)
|
|||
}
|
||||
srate = p.u.qpsk.symbol_rate;
|
||||
|
||||
regs[STB6100_DLB] = 0xdc;
|
||||
/* Disable LPEN */
|
||||
regs[STB6100_LPEN] &= ~STB6100_LPEN_LPEN; /* PLL Loop disabled */
|
||||
/* Set up tuner cleanly, LPF calibration on */
|
||||
rc = stb6100_write_reg(state, STB6100_FCCK, 0x4d | STB6100_FCCK_FCCK);
|
||||
if (rc < 0)
|
||||
return rc; /* allow LPF calibration */
|
||||
|
||||
if ((rc = stb6100_write_regs(state, regs)) < 0)
|
||||
/* PLL Loop disabled, bias on, VCO on, synth on */
|
||||
regs[STB6100_LPEN] = 0xeb;
|
||||
rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN]);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
/* Baseband gain. */
|
||||
if (srate >= 15000000)
|
||||
g = 9; // +4 dB
|
||||
else if (srate >= 5000000)
|
||||
g = 11; // +8 dB
|
||||
else
|
||||
g = 14; // +14 dB
|
||||
|
||||
regs[STB6100_G] = (regs[STB6100_G] & ~STB6100_G_G) | g;
|
||||
regs[STB6100_G] &= ~STB6100_G_GCT; /* mask GCT */
|
||||
regs[STB6100_G] |= (1 << 5); /* 2Vp-p Mode */
|
||||
/* Program the registers with their data values */
|
||||
|
||||
/* VCO divide ratio (LO divide ratio, VCO prescaler enable). */
|
||||
if (frequency <= 1075000)
|
||||
odiv = 1;
|
||||
else
|
||||
odiv = 0;
|
||||
regs[STB6100_VCO] = (regs[STB6100_VCO] & ~STB6100_VCO_ODIV) | (odiv << STB6100_VCO_ODIV_SHIFT);
|
||||
|
||||
if ((frequency > 1075000) && (frequency <= 1325000))
|
||||
psd2 = 0;
|
||||
else
|
||||
psd2 = 1;
|
||||
regs[STB6100_K] = (regs[STB6100_K] & ~STB6100_K_PSD2) | (psd2 << STB6100_K_PSD2_SHIFT);
|
||||
/* VCO enabled, seach clock off as per LL3.7, 3.4.1 */
|
||||
regs[STB6100_VCO] = 0xe0 | (odiv << STB6100_VCO_ODIV_SHIFT);
|
||||
|
||||
/* OSM */
|
||||
for (ptr = lkup;
|
||||
(ptr->val_high != 0) && !CHKRANGE(frequency, ptr->val_low, ptr->val_high);
|
||||
ptr++);
|
||||
|
||||
if (ptr->val_high == 0) {
|
||||
printk(KERN_ERR "%s: frequency out of range: %u kHz\n", __func__, frequency);
|
||||
return -EINVAL;
|
||||
}
|
||||
regs[STB6100_VCO] = (regs[STB6100_VCO] & ~STB6100_VCO_OSM) | ptr->reg;
|
||||
rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
if ((frequency > 1075000) && (frequency <= 1325000))
|
||||
psd2 = 0;
|
||||
else
|
||||
psd2 = 1;
|
||||
/* F(VCO) = F(LO) * (ODIV == 0 ? 2 : 4) */
|
||||
fvco = frequency << (1 + odiv);
|
||||
/* N(I) = floor(f(VCO) / (f(XTAL) * (PSD2 ? 2 : 1))) */
|
||||
nint = fvco / (state->reference << psd2);
|
||||
/* N(F) = round(f(VCO) / f(XTAL) * (PSD2 ? 2 : 1) - N(I)) * 2 ^ 9 */
|
||||
nfrac = DIV_ROUND_CLOSEST((fvco - (nint * state->reference << psd2))
|
||||
<< (9 - psd2),
|
||||
state->reference);
|
||||
<< (9 - psd2), state->reference);
|
||||
|
||||
/* NI */
|
||||
regs[STB6100_NI] = nint;
|
||||
rc = stb6100_write_reg(state, STB6100_NI, regs[STB6100_NI]);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
/* NF */
|
||||
regs[STB6100_NF_LSB] = nfrac;
|
||||
rc = stb6100_write_reg(state, STB6100_NF_LSB, regs[STB6100_NF_LSB]);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
/* K */
|
||||
regs[STB6100_K] = (0x38 & ~STB6100_K_PSD2) | (psd2 << STB6100_K_PSD2_SHIFT);
|
||||
regs[STB6100_K] = (regs[STB6100_K] & ~STB6100_K_NF_MSB) | ((nfrac >> 8) & STB6100_K_NF_MSB);
|
||||
rc = stb6100_write_reg(state, STB6100_K, regs[STB6100_K]);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
/* G Baseband gain. */
|
||||
if (srate >= 15000000)
|
||||
g = 9; /* +4 dB */
|
||||
else if (srate >= 5000000)
|
||||
g = 11; /* +8 dB */
|
||||
else
|
||||
g = 14; /* +14 dB */
|
||||
|
||||
regs[STB6100_G] = (0x10 & ~STB6100_G_G) | g;
|
||||
regs[STB6100_G] &= ~STB6100_G_GCT; /* mask GCT */
|
||||
regs[STB6100_G] |= (1 << 5); /* 2Vp-p Mode */
|
||||
rc = stb6100_write_reg(state, STB6100_G, regs[STB6100_G]);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
/* F we don't write as it is set up in BW set */
|
||||
|
||||
/* DLB set DC servo loop BW to 160Hz (LLA 3.8 / 2.1) */
|
||||
regs[STB6100_DLB] = 0xcc;
|
||||
rc = stb6100_write_reg(state, STB6100_DLB, regs[STB6100_DLB]);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
dprintk(verbose, FE_DEBUG, 1,
|
||||
"frequency = %u, srate = %u, g = %u, odiv = %u, psd2 = %u, fxtal = %u, osm = %u, fvco = %u, N(I) = %u, N(F) = %u",
|
||||
frequency, srate, (unsigned int)g, (unsigned int)odiv,
|
||||
(unsigned int)psd2, state->reference,
|
||||
ptr->reg, fvco, nint, nfrac);
|
||||
regs[STB6100_NI] = nint;
|
||||
regs[STB6100_NF_LSB] = nfrac;
|
||||
regs[STB6100_K] = (regs[STB6100_K] & ~STB6100_K_NF_MSB) | ((nfrac >> 8) & STB6100_K_NF_MSB);
|
||||
regs[STB6100_VCO] |= STB6100_VCO_OSCH; /* VCO search enabled */
|
||||
regs[STB6100_VCO] |= STB6100_VCO_OCK; /* VCO search clock off */
|
||||
regs[STB6100_FCCK] |= STB6100_FCCK_FCCK; /* LPF BW setting clock enabled */
|
||||
regs[STB6100_LPEN] &= ~STB6100_LPEN_LPEN; /* PLL loop disabled */
|
||||
/* Power up. */
|
||||
regs[STB6100_LPEN] |= STB6100_LPEN_SYNP | STB6100_LPEN_OSCP | STB6100_LPEN_BEN;
|
||||
|
||||
msleep(2);
|
||||
if ((rc = stb6100_write_regs(state, regs)) < 0)
|
||||
/* Set up the test registers */
|
||||
regs[STB6100_TEST1] = 0x8f;
|
||||
rc = stb6100_write_reg(state, STB6100_TEST1, regs[STB6100_TEST1]);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
regs[STB6100_TEST3] = 0xde;
|
||||
rc = stb6100_write_reg(state, STB6100_TEST3, regs[STB6100_TEST3]);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
/* Bring up tuner according to LLA 3.7 3.4.1, step 2 */
|
||||
regs[STB6100_LPEN] = 0xfb; /* PLL Loop enabled, bias on, VCO on, synth on */
|
||||
rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN]);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
msleep(2);
|
||||
regs[STB6100_LPEN] |= STB6100_LPEN_LPEN; /* PLL loop enabled */
|
||||
if ((rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN])) < 0)
|
||||
return rc;
|
||||
|
||||
/* Bring up tuner according to LLA 3.7 3.4.1, step 3 */
|
||||
regs[STB6100_VCO] &= ~STB6100_VCO_OCK; /* VCO fast search */
|
||||
if ((rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO])) < 0)
|
||||
rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
msleep(10); /* wait for LO to lock */
|
||||
msleep(10); /* This is dangerous as another (related) thread may start */ /* wait for LO to lock */
|
||||
|
||||
regs[STB6100_VCO] &= ~STB6100_VCO_OSCH; /* vco search disabled */
|
||||
regs[STB6100_VCO] |= STB6100_VCO_OCK; /* search clock off */
|
||||
if ((rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO])) < 0)
|
||||
return rc;
|
||||
regs[STB6100_FCCK] &= ~STB6100_FCCK_FCCK; /* LPF BW clock disabled */
|
||||
stb6100_normalise_regs(regs);
|
||||
if ((rc = stb6100_write_reg_range(state, ®s[1], 1, STB6100_NUMREGS - 3)) < 0)
|
||||
rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
msleep(100);
|
||||
rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d);
|
||||
if (rc < 0)
|
||||
return rc; /* Stop LPF calibration */
|
||||
|
||||
msleep(10); /* This is dangerous as another (related) thread may start */
|
||||
/* wait for stabilisation, (should not be necessary) */
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
@ -433,8 +494,8 @@ static int stb6100_init(struct dvb_frontend *fe)
|
|||
state->bandwidth = status->bandwidth * 1000; /* Hz */
|
||||
state->reference = status->refclock / 1000; /* kHz */
|
||||
|
||||
/* Set default bandwidth. */
|
||||
return stb6100_set_bandwidth(fe, state->bandwidth);
|
||||
/* Set default bandwidth. Modified, PN 13-May-10 */
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int stb6100_get_state(struct dvb_frontend *fe,
|
||||
|
|
|
|||
Loading…
Reference in New Issue