From f33dabf59d6cf6b4ce48e1552ae84092a4f753df Mon Sep 17 00:00:00 2001 From: Alain Volmat Date: Thu, 21 Nov 2019 14:27:46 +0100 Subject: [PATCH] dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml The document was migrated to Yaml format and renamed st,stm32-i2c.yaml Signed-off-by: Alain Volmat Signed-off-by: Rob Herring --- .../devicetree/bindings/i2c/i2c-stm32.txt | 65 -------- .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 141 ++++++++++++++++++ 2 files changed, 141 insertions(+), 65 deletions(-) delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-stm32.txt create mode 100644 Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml diff --git a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt deleted file mode 100644 index ce3df2fff6c8..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt +++ /dev/null @@ -1,65 +0,0 @@ -* I2C controller embedded in STMicroelectronics STM32 I2C platform - -Required properties: -- compatible: Must be one of the following - - "st,stm32f4-i2c" - - "st,stm32f7-i2c" -- reg: Offset and length of the register set for the device -- interrupts: Must contain the interrupt id for I2C event and then the - interrupt id for I2C error. -- resets: Must contain the phandle to the reset controller. -- clocks: Must contain the input clock of the I2C instance. -- A pinctrl state named "default" must be defined to set pins in mode of - operation for I2C transfer -- #address-cells = <1>; -- #size-cells = <0>; - -Optional properties: -- clock-frequency: Desired I2C bus clock frequency in Hz. If not specified, - the default 100 kHz frequency will be used. - For STM32F4 SoC Standard-mode and Fast-mode are supported, possible values are - 100000 and 400000. - For STM32F7, STM32H7 and STM32MP1 SoCs, Standard-mode, Fast-mode and Fast-mode - Plus are supported, possible values are 100000, 400000 and 1000000. -- dmas: List of phandles to rx and tx DMA channels. Refer to stm32-dma.txt. -- dma-names: List of dma names. Valid names are: "rx" and "tx". -- i2c-scl-rising-time-ns: I2C SCL Rising time for the board (default: 25) - For STM32F7, STM32H7 and STM32MP1 only. -- i2c-scl-falling-time-ns: I2C SCL Falling time for the board (default: 10) - For STM32F7, STM32H7 and STM32MP1 only. - I2C Timings are derived from these 2 values -- st,syscfg-fmp: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode - Plus speed is selected by slave. - 1st cell: phandle to syscfg - 2nd cell: register offset within SYSCFG - 3rd cell: register bitmask for FMP bit - For STM32F7, STM32H7 and STM32MP1 only. - -Example: - - i2c@40005400 { - compatible = "st,stm32f4-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x40005400 0x400>; - interrupts = <31>, - <32>; - resets = <&rcc 277>; - clocks = <&rcc 0 149>; - pinctrl-0 = <&i2c1_sda_pin>, <&i2c1_scl_pin>; - pinctrl-names = "default"; - }; - - i2c@40005400 { - compatible = "st,stm32f7-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x40005400 0x400>; - interrupts = <31>, - <32>; - resets = <&rcc STM32F7_APB1_RESET(I2C1)>; - clocks = <&rcc 1 CLK_I2C1>; - pinctrl-0 = <&i2c1_sda_pin>, <&i2c1_scl_pin>; - pinctrl-names = "default"; - st,syscfg-fmp = <&syscfg 0x4 0x1>; - }; diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml new file mode 100644 index 000000000000..900ec1ab6a47 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/st,stm32-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: I2C controller embedded in STMicroelectronics STM32 I2C platform + +maintainers: + - Pierre-Yves MORDRET + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - st,stm32f7-i2c + then: + properties: + i2c-scl-rising-time-ns: + default: 25 + + i2c-scl-falling-time-ns: + default: 10 + + st,syscfg-fmp: + description: Use to set Fast Mode Plus bit within SYSCFG when + Fast Mode Plus speed is selected by slave. + Format is phandle to syscfg / register offset within + syscfg / register bitmask for FMP bit. + allOf: + - $ref: "/schemas/types.yaml#/definitions/phandle-array" + - items: + minItems: 3 + maxItems: 3 + + - if: + properties: + compatible: + contains: + enum: + - st,stm32f4-i2c + then: + properties: + clock-frequency: + enum: [100000, 400000] + +properties: + compatible: + enum: + - st,stm32f4-i2c + - st,stm32f7-i2c + + reg: + maxItems: 1 + + interrupts: + items: + - description: interrupt ID for I2C event + - description: interrupt ID for I2C error + + resets: + maxItems: 1 + + clocks: + maxItems: 1 + + dmas: + items: + - description: RX DMA Channel phandle + - description: TX DMA Channel phandle + + dma-names: + items: + - const: rx + - const: tx + + clock-frequency: + description: Desired I2C bus clock frequency in Hz. If not specified, + the default 100 kHz frequency will be used. + For STM32F7, STM32H7 and STM32MP1 SoCs, Standard-mode, + Fast-mode and Fast-mode Plus are supported, possible + values are 100000, 400000 and 1000000. + default: 100000 + enum: [100000, 400000, 1000000] + +required: + - compatible + - reg + - interrupts + - resets + - clocks + +examples: + - | + #include + #include + //Example 1 (with st,stm32f4-i2c compatible) + i2c@40005400 { + compatible = "st,stm32f4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40005400 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc 277>; + clocks = <&rcc 0 149>; + }; + + //Example 2 (with st,stm32f7-i2c compatible) + i2c@40005800 { + compatible = "st,stm32f7-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40005800 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc STM32F7_APB1_RESET(I2C1)>; + clocks = <&rcc 1 CLK_I2C1>; + }; + + //Example 3 (with st,stm32f7-i2c compatible on stm32mp) + #include + #include + #include + i2c@40013000 { + compatible = "st,stm32f7-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40013000 0x400>; + interrupts = , + ; + clocks = <&rcc I2C2_K>; + resets = <&rcc I2C2_R>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + st,syscfg-fmp = <&syscfg 0x4 0x2>; + }; +...