mirror of https://gitee.com/openkylin/linux.git
sh: Add support for Solution Engine 7206 and 7619 boards.
This adds support for the Solution Engine 7206 and 7619. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
Yoshinori Sato
Paul Mundt
parent
b229632abd
commit
f36af3fd37
|
|
@ -0,0 +1,7 @@
|
|||
#
|
||||
# Makefile for the 7206 SolutionEngine specific parts of the kernel
|
||||
#
|
||||
|
||||
obj-y := setup.o io.o irq.o
|
||||
obj-$(CONFIG_HEARTBEAT) += led.o
|
||||
|
||||
|
|
@ -0,0 +1,123 @@
|
|||
/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
|
||||
*
|
||||
* linux/arch/sh/boards/se/7206/io.c
|
||||
*
|
||||
* Copyright (C) 2006 Yoshinori Sato
|
||||
*
|
||||
* I/O routine for Hitachi 7206 SolutionEngine.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/types.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/se7206.h>
|
||||
|
||||
|
||||
static inline void delay(void)
|
||||
{
|
||||
ctrl_inw(0x20000000); /* P2 ROM Area */
|
||||
}
|
||||
|
||||
/* MS7750 requires special versions of in*, out* routines, since
|
||||
PC-like io ports are located at upper half byte of 16-bit word which
|
||||
can be accessed only with 16-bit wide. */
|
||||
|
||||
static inline volatile __u16 *
|
||||
port2adr(unsigned int port)
|
||||
{
|
||||
if (port >= 0x2000)
|
||||
return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
|
||||
else if (port >= 0x300 || port < 0x310)
|
||||
return (volatile __u16 *) (PA_SMSC + (port - 0x300));
|
||||
}
|
||||
|
||||
unsigned char se7206_inb(unsigned long port)
|
||||
{
|
||||
return (*port2adr(port))&0xff;
|
||||
}
|
||||
|
||||
unsigned char se7206_inb_p(unsigned long port)
|
||||
{
|
||||
unsigned long v;
|
||||
|
||||
v = (*port2adr(port))&0xff;
|
||||
delay();
|
||||
return v;
|
||||
}
|
||||
|
||||
unsigned short se7206_inw(unsigned long port)
|
||||
{
|
||||
return *port2adr(port);;
|
||||
}
|
||||
|
||||
unsigned int se7206_inl(unsigned long port)
|
||||
{
|
||||
maybebadio(port);
|
||||
return 0;
|
||||
}
|
||||
|
||||
void se7206_outb(unsigned char value, unsigned long port)
|
||||
{
|
||||
*(port2adr(port)) = value;
|
||||
}
|
||||
|
||||
void se7206_outb_p(unsigned char value, unsigned long port)
|
||||
{
|
||||
*(port2adr(port)) = value;
|
||||
delay();
|
||||
}
|
||||
|
||||
void se7206_outw(unsigned short value, unsigned long port)
|
||||
{
|
||||
*port2adr(port) = value;
|
||||
}
|
||||
|
||||
void se7206_outl(unsigned int value, unsigned long port)
|
||||
{
|
||||
maybebadio(port);
|
||||
}
|
||||
|
||||
void se7206_insb(unsigned long port, void *addr, unsigned long count)
|
||||
{
|
||||
volatile __u16 *p = port2adr(port);
|
||||
__u8 *ap = addr;
|
||||
|
||||
while (count--)
|
||||
*ap++ = *p;
|
||||
}
|
||||
|
||||
void se7206_insw(unsigned long port, void *addr, unsigned long count)
|
||||
{
|
||||
volatile __u16 *p = port2adr(port);
|
||||
__u16 *ap = addr;
|
||||
while (count--)
|
||||
*ap++ = *p;
|
||||
}
|
||||
|
||||
void se7206_insl(unsigned long port, void *addr, unsigned long count)
|
||||
{
|
||||
maybebadio(port);
|
||||
}
|
||||
|
||||
void se7206_outsb(unsigned long port, const void *addr, unsigned long count)
|
||||
{
|
||||
volatile __u16 *p = port2adr(port);
|
||||
const __u8 *ap = addr;
|
||||
|
||||
while (count--)
|
||||
*p = *ap++;
|
||||
}
|
||||
|
||||
void se7206_outsw(unsigned long port, const void *addr, unsigned long count)
|
||||
{
|
||||
volatile __u16 *p = port2adr(port);
|
||||
const __u16 *ap = addr;
|
||||
while (count--)
|
||||
*p = *ap++;
|
||||
}
|
||||
|
||||
void se7206_outsl(unsigned long port, const void *addr, unsigned long count)
|
||||
{
|
||||
maybebadio(port);
|
||||
}
|
||||
|
|
@ -0,0 +1,161 @@
|
|||
/*
|
||||
* linux/arch/sh/boards/se/7206/irq.c
|
||||
*
|
||||
* Copyright (C) 2005,2006 Yoshinori Sato
|
||||
*
|
||||
* Hitachi SolutionEngine Support.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/config.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/irq.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/se7206.h>
|
||||
|
||||
#define INTSTS0 0x31800000
|
||||
#define INTSTS1 0x31800002
|
||||
#define INTMSK0 0x31800004
|
||||
#define INTMSK1 0x31800006
|
||||
#define INTSEL 0x31800008
|
||||
|
||||
/* shutdown is same as "disable" */
|
||||
#define shutdown_se7206_irq disable_se7206_irq
|
||||
|
||||
static void disable_se7206_irq(unsigned int irq)
|
||||
{
|
||||
unsigned short val;
|
||||
unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
|
||||
unsigned short msk0,msk1;
|
||||
|
||||
/* Set the priority in IPR to 0 */
|
||||
val = ctrl_inw(INTC_IPR01);
|
||||
val &= mask;
|
||||
ctrl_outw(val, INTC_IPR01);
|
||||
/* FPGA mask set */
|
||||
msk0 = ctrl_inw(INTMSK0);
|
||||
msk1 = ctrl_inw(INTMSK1);
|
||||
|
||||
switch (irq) {
|
||||
case IRQ0_IRQ:
|
||||
msk0 |= 0x0010;
|
||||
break;
|
||||
case IRQ1_IRQ:
|
||||
msk0 |= 0x000f;
|
||||
break;
|
||||
case IRQ2_IRQ:
|
||||
msk0 |= 0x0f00;
|
||||
msk1 |= 0x00ff;
|
||||
break;
|
||||
}
|
||||
ctrl_outw(msk0, INTMSK0);
|
||||
ctrl_outw(msk1, INTMSK1);
|
||||
}
|
||||
|
||||
static void enable_se7206_irq(unsigned int irq)
|
||||
{
|
||||
unsigned short val;
|
||||
unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
|
||||
unsigned short msk0,msk1;
|
||||
|
||||
/* Set priority in IPR back to original value */
|
||||
val = ctrl_inw(INTC_IPR01);
|
||||
val |= value;
|
||||
ctrl_outw(val, INTC_IPR01);
|
||||
|
||||
/* FPGA mask reset */
|
||||
msk0 = ctrl_inw(INTMSK0);
|
||||
msk1 = ctrl_inw(INTMSK1);
|
||||
|
||||
switch (irq) {
|
||||
case IRQ0_IRQ:
|
||||
msk0 &= ~0x0010;
|
||||
break;
|
||||
case IRQ1_IRQ:
|
||||
msk0 &= ~0x000f;
|
||||
break;
|
||||
case IRQ2_IRQ:
|
||||
msk0 &= ~0x0f00;
|
||||
msk1 &= ~0x00ff;
|
||||
break;
|
||||
}
|
||||
ctrl_outw(msk0, INTMSK0);
|
||||
ctrl_outw(msk1, INTMSK1);
|
||||
}
|
||||
|
||||
static unsigned int startup_se7206_irq(unsigned int irq)
|
||||
{
|
||||
enable_se7206_irq(irq);
|
||||
return 0; /* never anything pending */
|
||||
}
|
||||
|
||||
static void ack_se7206_irq(unsigned int irq)
|
||||
{
|
||||
disable_se7206_irq(irq);
|
||||
}
|
||||
|
||||
static void end_se7206_irq(unsigned int irq)
|
||||
{
|
||||
unsigned short sts0,sts1;
|
||||
|
||||
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
|
||||
enable_se7206_irq(irq);
|
||||
/* FPGA isr clear */
|
||||
sts0 = ctrl_inw(INTSTS0);
|
||||
sts1 = ctrl_inw(INTSTS1);
|
||||
|
||||
switch (irq) {
|
||||
case IRQ0_IRQ:
|
||||
sts0 &= ~0x0010;
|
||||
break;
|
||||
case IRQ1_IRQ:
|
||||
sts0 &= ~0x000f;
|
||||
break;
|
||||
case IRQ2_IRQ:
|
||||
sts0 &= ~0x0f00;
|
||||
sts1 &= ~0x00ff;
|
||||
break;
|
||||
}
|
||||
ctrl_outw(sts0, INTSTS0);
|
||||
ctrl_outw(sts1, INTSTS1);
|
||||
}
|
||||
|
||||
static struct hw_interrupt_type se7206_irq_type = {
|
||||
.typename = "SE7206 FPGA-IRQ",
|
||||
.startup = startup_se7206_irq,
|
||||
.shutdown = shutdown_se7206_irq,
|
||||
.enable = enable_se7206_irq,
|
||||
.disable = disable_se7206_irq,
|
||||
.ack = ack_se7206_irq,
|
||||
.end = end_se7206_irq,
|
||||
};
|
||||
|
||||
static void make_se7206_irq(unsigned int irq)
|
||||
{
|
||||
disable_irq_nosync(irq);
|
||||
irq_desc[irq].handler = &se7206_irq_type;
|
||||
disable_se7206_irq(irq);
|
||||
}
|
||||
|
||||
/*
|
||||
* Initialize IRQ setting
|
||||
*/
|
||||
void __init init_se7206_IRQ(void)
|
||||
{
|
||||
make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
|
||||
make_se7206_irq(IRQ1_IRQ); /* ATA */
|
||||
make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
|
||||
ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
|
||||
|
||||
/* FPGA System register setup*/
|
||||
ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */
|
||||
ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */
|
||||
/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
|
||||
ctrl_outw(0x0001,INTSEL);
|
||||
}
|
||||
|
||||
int se7206_irq_demux(int irq)
|
||||
{
|
||||
return irq;
|
||||
}
|
||||
|
|
@ -0,0 +1,57 @@
|
|||
/*
|
||||
* linux/arch/sh/kernel/led_se.c
|
||||
*
|
||||
* Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
|
||||
*
|
||||
* May be copied or modified under the terms of the GNU General Public
|
||||
* License. See linux/COPYING for more information.
|
||||
*
|
||||
* This file contains Solution Engine specific LED code.
|
||||
*/
|
||||
|
||||
#include <linux/config.h>
|
||||
#include <asm/se7206.h>
|
||||
|
||||
#ifdef CONFIG_HEARTBEAT
|
||||
|
||||
#include <linux/sched.h>
|
||||
|
||||
/* Cycle the LED's in the clasic Knightrider/Sun pattern */
|
||||
void heartbeat_se(void)
|
||||
{
|
||||
static unsigned int cnt = 0, period = 0;
|
||||
volatile unsigned short* p = (volatile unsigned short*)PA_LED;
|
||||
static unsigned bit = 0, up = 1;
|
||||
|
||||
cnt += 1;
|
||||
if (cnt < period) {
|
||||
return;
|
||||
}
|
||||
|
||||
cnt = 0;
|
||||
|
||||
/* Go through the points (roughly!):
|
||||
* f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
|
||||
*/
|
||||
period = 110 - ( (300<<FSHIFT)/
|
||||
((avenrun[0]/5) + (3<<FSHIFT)) );
|
||||
|
||||
if (up) {
|
||||
if (bit == 7) {
|
||||
bit--;
|
||||
up=0;
|
||||
} else {
|
||||
bit ++;
|
||||
}
|
||||
} else {
|
||||
if (bit == 0) {
|
||||
bit++;
|
||||
up=1;
|
||||
} else {
|
||||
bit--;
|
||||
}
|
||||
}
|
||||
*p = 1<<(bit+8);
|
||||
|
||||
}
|
||||
#endif /* CONFIG_HEARTBEAT */
|
||||
|
|
@ -0,0 +1,80 @@
|
|||
/*
|
||||
*
|
||||
* linux/arch/sh/boards/se/7206/setup.c
|
||||
*
|
||||
* Copyright (C) 2006 Yoshinori Sato
|
||||
*
|
||||
* Hitachi 7206 SolutionEngine Support.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/se7206.h>
|
||||
#include <asm/machvec.h>
|
||||
|
||||
static struct resource smc91x_resources[] = {
|
||||
[0] = {
|
||||
.start = 0x300,
|
||||
.end = 0x300 + 0x020 - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[1] = {
|
||||
.start = 64,
|
||||
.end = 64,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device smc91x_device = {
|
||||
.name = "smc91x",
|
||||
.id = -1,
|
||||
.num_resources = ARRAY_SIZE(smc91x_resources),
|
||||
.resource = smc91x_resources,
|
||||
};
|
||||
|
||||
static int __init se7206_devices_setup(void)
|
||||
{
|
||||
return platform_device_register(&smc91x_device);
|
||||
}
|
||||
|
||||
__initcall(se7206_devices_setup);
|
||||
|
||||
void heartbeat_se(void);
|
||||
|
||||
/*
|
||||
* The Machine Vector
|
||||
*/
|
||||
|
||||
struct sh_machine_vector mv_se __initmv = {
|
||||
.mv_name = "SolutionEngine",
|
||||
.mv_nr_irqs = 256,
|
||||
.mv_inb = se7206_inb,
|
||||
.mv_inw = se7206_inw,
|
||||
.mv_inl = se7206_inl,
|
||||
.mv_outb = se7206_outb,
|
||||
.mv_outw = se7206_outw,
|
||||
.mv_outl = se7206_outl,
|
||||
|
||||
.mv_inb_p = se7206_inb_p,
|
||||
.mv_inw_p = se7206_inw,
|
||||
.mv_inl_p = se7206_inl,
|
||||
.mv_outb_p = se7206_outb_p,
|
||||
.mv_outw_p = se7206_outw,
|
||||
.mv_outl_p = se7206_outl,
|
||||
|
||||
.mv_insb = se7206_insb,
|
||||
.mv_insw = se7206_insw,
|
||||
.mv_insl = se7206_insl,
|
||||
.mv_outsb = se7206_outsb,
|
||||
.mv_outsw = se7206_outsw,
|
||||
.mv_outsl = se7206_outsl,
|
||||
|
||||
.mv_init_irq = init_se7206_IRQ,
|
||||
.mv_irq_demux = se7206_irq_demux,
|
||||
#ifdef CONFIG_HEARTBEAT
|
||||
.mv_heartbeat = heartbeat_se,
|
||||
#endif
|
||||
};
|
||||
ALIAS_MV(se)
|
||||
|
|
@ -0,0 +1,5 @@
|
|||
#
|
||||
# Makefile for the 7619 SolutionEngine specific parts of the kernel
|
||||
#
|
||||
|
||||
obj-y := setup.o io.o
|
||||
|
|
@ -0,0 +1,102 @@
|
|||
/*
|
||||
*
|
||||
* linux/arch/sh/boards/se/7619/io.c
|
||||
*
|
||||
* Copyright (C) 2006 Yoshinori Sato
|
||||
*
|
||||
* I/O routine for Hitachi 7619 SolutionEngine.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/types.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/se7619.h>
|
||||
#include <asm/irq.h>
|
||||
|
||||
/* FIXME: M3A-ZAB7 Compact Flash Slot support */
|
||||
|
||||
static inline void delay(void)
|
||||
{
|
||||
ctrl_inw(0xa0000000); /* Uncached ROM area (P2) */
|
||||
}
|
||||
|
||||
#define badio(name,port) \
|
||||
printk("bad I/O operation (%s) for port 0x%lx at 0x%08x\n", \
|
||||
#name, (port), (__u32) __builtin_return_address(0))
|
||||
|
||||
unsigned char se7619___inb(unsigned long port)
|
||||
{
|
||||
badio(inb, port);
|
||||
return 0;
|
||||
}
|
||||
|
||||
unsigned char se7619___inb_p(unsigned long port)
|
||||
{
|
||||
badio(inb_p, port);
|
||||
delay();
|
||||
return 0;
|
||||
}
|
||||
|
||||
unsigned short se7619___inw(unsigned long port)
|
||||
{
|
||||
badio(inw, port);
|
||||
return 0;
|
||||
}
|
||||
|
||||
unsigned int se7619___inl(unsigned long port)
|
||||
{
|
||||
badio(inl, port);
|
||||
return 0;
|
||||
}
|
||||
|
||||
void se7619___outb(unsigned char value, unsigned long port)
|
||||
{
|
||||
badio(outb, port);
|
||||
}
|
||||
|
||||
void se7619___outb_p(unsigned char value, unsigned long port)
|
||||
{
|
||||
badio(outb_p, port);
|
||||
delay();
|
||||
}
|
||||
|
||||
void se7619___outw(unsigned short value, unsigned long port)
|
||||
{
|
||||
badio(outw, port);
|
||||
}
|
||||
|
||||
void se7619___outl(unsigned int value, unsigned long port)
|
||||
{
|
||||
badio(outl, port);
|
||||
}
|
||||
|
||||
void se7619___insb(unsigned long port, void *addr, unsigned long count)
|
||||
{
|
||||
badio(inw, port);
|
||||
}
|
||||
|
||||
void se7619___insw(unsigned long port, void *addr, unsigned long count)
|
||||
{
|
||||
badio(inw, port);
|
||||
}
|
||||
|
||||
void se7619___insl(unsigned long port, void *addr, unsigned long count)
|
||||
{
|
||||
badio(insl, port);
|
||||
}
|
||||
|
||||
void se7619___outsb(unsigned long port, const void *addr, unsigned long count)
|
||||
{
|
||||
badio(insl, port);
|
||||
}
|
||||
|
||||
void se7619___outsw(unsigned long port, const void *addr, unsigned long count)
|
||||
{
|
||||
badio(insl, port);
|
||||
}
|
||||
|
||||
void se7619___outsl(unsigned long port, const void *addr, unsigned long count)
|
||||
{
|
||||
badio(outsw, port);
|
||||
}
|
||||
|
|
@ -0,0 +1,43 @@
|
|||
/*
|
||||
* arch/sh/boards/se/7619/setup.c
|
||||
*
|
||||
* Copyright (C) 2006 Yoshinori Sato
|
||||
*
|
||||
* Hitachi SH7619 SolutionEngine Support.
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/se7619.h>
|
||||
#include <asm/machvec.h>
|
||||
|
||||
/*
|
||||
* The Machine Vector
|
||||
*/
|
||||
|
||||
struct sh_machine_vector mv_se __initmv = {
|
||||
.mv_name = "SolutionEngine",
|
||||
.mv_nr_irqs = 108,
|
||||
.mv_inb = se7619___inb,
|
||||
.mv_inw = se7619___inw,
|
||||
.mv_inl = se7619___inl,
|
||||
.mv_outb = se7619___outb,
|
||||
.mv_outw = se7619___outw,
|
||||
.mv_outl = se7619___outl,
|
||||
|
||||
.mv_inb_p = se7619___inb_p,
|
||||
.mv_inw_p = se7619___inw,
|
||||
.mv_inl_p = se7619___inl,
|
||||
.mv_outb_p = se7619___outb_p,
|
||||
.mv_outw_p = se7619___outw,
|
||||
.mv_outl_p = se7619___outl,
|
||||
|
||||
.mv_insb = se7619___insb,
|
||||
.mv_insw = se7619___insw,
|
||||
.mv_insl = se7619___insl,
|
||||
.mv_outsb = se7619___outsb,
|
||||
.mv_outsw = se7619___outsw,
|
||||
.mv_outsl = se7619___outsl,
|
||||
};
|
||||
ALIAS_MV(se)
|
||||
|
|
@ -0,0 +1,826 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.19-rc4
|
||||
# Sun Nov 5 16:20:10 2006
|
||||
#
|
||||
CONFIG_SUPERH=y
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||
CONFIG_GENERIC_HWEIGHT=y
|
||||
CONFIG_GENERIC_HARDIRQS=y
|
||||
CONFIG_GENERIC_IRQ_PROBE=y
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
# CONFIG_GENERIC_TIME is not set
|
||||
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_LOCALVERSION=""
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SYSVIPC is not set
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
# CONFIG_TASKSTATS is not set
|
||||
# CONFIG_UTS_NS is not set
|
||||
# CONFIG_AUDIT is not set
|
||||
# CONFIG_IKCONFIG is not set
|
||||
# CONFIG_RELAY is not set
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||
CONFIG_SYSCTL=y
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_UID16=y
|
||||
# CONFIG_SYSCTL_SYSCALL is not set
|
||||
CONFIG_KALLSYMS=y
|
||||
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
||||
# CONFIG_HOTPLUG is not set
|
||||
CONFIG_PRINTK=y
|
||||
CONFIG_BUG=y
|
||||
CONFIG_ELF_CORE=y
|
||||
CONFIG_BASE_FULL=y
|
||||
# CONFIG_FUTEX is not set
|
||||
# CONFIG_EPOLL is not set
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_TINY_SHMEM=y
|
||||
CONFIG_BASE_SMALL=0
|
||||
# CONFIG_SLOB is not set
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
# CONFIG_MODULES is not set
|
||||
|
||||
#
|
||||
# Block layer
|
||||
#
|
||||
CONFIG_BLOCK=y
|
||||
# CONFIG_LBD is not set
|
||||
# CONFIG_LSF is not set
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
# CONFIG_IOSCHED_AS is not set
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
# CONFIG_DEFAULT_AS is not set
|
||||
# CONFIG_DEFAULT_DEADLINE is not set
|
||||
# CONFIG_DEFAULT_CFQ is not set
|
||||
CONFIG_DEFAULT_NOOP=y
|
||||
CONFIG_DEFAULT_IOSCHED="noop"
|
||||
|
||||
#
|
||||
# System type
|
||||
#
|
||||
# CONFIG_SH_SOLUTION_ENGINE is not set
|
||||
# CONFIG_SH_7751_SOLUTION_ENGINE is not set
|
||||
# CONFIG_SH_7300_SOLUTION_ENGINE is not set
|
||||
# CONFIG_SH_7343_SOLUTION_ENGINE is not set
|
||||
# CONFIG_SH_73180_SOLUTION_ENGINE is not set
|
||||
# CONFIG_SH_7751_SYSTEMH is not set
|
||||
# CONFIG_SH_HP6XX is not set
|
||||
# CONFIG_SH_EC3104 is not set
|
||||
# CONFIG_SH_SATURN is not set
|
||||
# CONFIG_SH_DREAMCAST is not set
|
||||
# CONFIG_SH_BIGSUR is not set
|
||||
# CONFIG_SH_MPC1211 is not set
|
||||
# CONFIG_SH_SH03 is not set
|
||||
# CONFIG_SH_SECUREEDGE5410 is not set
|
||||
# CONFIG_SH_HS7751RVOIP is not set
|
||||
# CONFIG_SH_7710VOIPGW is not set
|
||||
# CONFIG_SH_RTS7751R2D is not set
|
||||
# CONFIG_SH_R7780RP is not set
|
||||
# CONFIG_SH_EDOSK7705 is not set
|
||||
# CONFIG_SH_SH4202_MICRODEV is not set
|
||||
# CONFIG_SH_LANDISK is not set
|
||||
# CONFIG_SH_TITAN is not set
|
||||
# CONFIG_SH_SHMIN is not set
|
||||
CONFIG_SH_7206_SOLUTION_ENGINE=y
|
||||
# CONFIG_SH_7619_SOLUTION_ENGINE is not set
|
||||
# CONFIG_SH_UNKNOWN is not set
|
||||
|
||||
#
|
||||
# Processor selection
|
||||
#
|
||||
CONFIG_CPU_SH2=y
|
||||
CONFIG_CPU_SH2A=y
|
||||
|
||||
#
|
||||
# SH-2 Processor Support
|
||||
#
|
||||
# CONFIG_CPU_SUBTYPE_SH7604 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7619 is not set
|
||||
|
||||
#
|
||||
# SH-2A Processor Support
|
||||
#
|
||||
CONFIG_CPU_SUBTYPE_SH7206=y
|
||||
|
||||
#
|
||||
# SH-3 Processor Support
|
||||
#
|
||||
# CONFIG_CPU_SUBTYPE_SH7300 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7705 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7706 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7707 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7708 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7709 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7710 is not set
|
||||
|
||||
#
|
||||
# SH-4 Processor Support
|
||||
#
|
||||
# CONFIG_CPU_SUBTYPE_SH7750 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7091 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7750R is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7750S is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7751 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7751R is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7760 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
|
||||
|
||||
#
|
||||
# ST40 Processor Support
|
||||
#
|
||||
# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
|
||||
# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
|
||||
|
||||
#
|
||||
# SH-4A Processor Support
|
||||
#
|
||||
# CONFIG_CPU_SUBTYPE_SH7770 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7780 is not set
|
||||
|
||||
#
|
||||
# SH4AL-DSP Processor Support
|
||||
#
|
||||
# CONFIG_CPU_SUBTYPE_SH73180 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7343 is not set
|
||||
|
||||
#
|
||||
# Memory management options
|
||||
#
|
||||
CONFIG_PAGE_OFFSET=0x00000000
|
||||
CONFIG_MEMORY_START=0x0c000000
|
||||
CONFIG_MEMORY_SIZE=0x02000000
|
||||
CONFIG_SELECT_MEMORY_MODEL=y
|
||||
CONFIG_FLATMEM_MANUAL=y
|
||||
# CONFIG_DISCONTIGMEM_MANUAL is not set
|
||||
# CONFIG_SPARSEMEM_MANUAL is not set
|
||||
CONFIG_FLATMEM=y
|
||||
CONFIG_FLAT_NODE_MEM_MAP=y
|
||||
# CONFIG_SPARSEMEM_STATIC is not set
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=4
|
||||
# CONFIG_RESOURCES_64BIT is not set
|
||||
|
||||
#
|
||||
# Cache configuration
|
||||
#
|
||||
# CONFIG_SH_DIRECT_MAPPED is not set
|
||||
# CONFIG_SH_WRITETHROUGH is not set
|
||||
# CONFIG_SH_OCRAM is not set
|
||||
|
||||
#
|
||||
# Processor features
|
||||
#
|
||||
# CONFIG_CPU_LITTLE_ENDIAN is not set
|
||||
# CONFIG_SH_FPU is not set
|
||||
# CONFIG_SH_FPU_EMU is not set
|
||||
# CONFIG_SH_DSP is not set
|
||||
|
||||
#
|
||||
# Timer support
|
||||
#
|
||||
CONFIG_SH_CMT=y
|
||||
# CONFIG_SH_MTU2 is not set
|
||||
CONFIG_SH_PCLK_FREQ=33333333
|
||||
CONFIG_SH_CLK_MD=6
|
||||
|
||||
#
|
||||
# CPU Frequency scaling
|
||||
#
|
||||
# CONFIG_CPU_FREQ is not set
|
||||
|
||||
#
|
||||
# DMA support
|
||||
#
|
||||
# CONFIG_SH_DMA is not set
|
||||
|
||||
#
|
||||
# Companion Chips
|
||||
#
|
||||
# CONFIG_HD6446X_SERIES is not set
|
||||
|
||||
#
|
||||
# Kernel features
|
||||
#
|
||||
CONFIG_HZ_100=y
|
||||
# CONFIG_HZ_250 is not set
|
||||
# CONFIG_HZ_1000 is not set
|
||||
CONFIG_HZ=100
|
||||
# CONFIG_KEXEC is not set
|
||||
# CONFIG_SMP is not set
|
||||
CONFIG_PREEMPT_NONE=y
|
||||
# CONFIG_PREEMPT_VOLUNTARY is not set
|
||||
# CONFIG_PREEMPT is not set
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
CONFIG_ZERO_PAGE_OFFSET=0x00001000
|
||||
CONFIG_BOOT_LINK_OFFSET=0x00800000
|
||||
# CONFIG_UBC_WAKEUP is not set
|
||||
# CONFIG_CMDLINE_BOOL is not set
|
||||
|
||||
#
|
||||
# Bus options
|
||||
#
|
||||
# CONFIG_PCI is not set
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
|
||||
#
|
||||
# PCI Hotplug Support
|
||||
#
|
||||
|
||||
#
|
||||
# Executable file formats
|
||||
#
|
||||
CONFIG_BINFMT_FLAT=y
|
||||
CONFIG_BINFMT_ZFLAT=y
|
||||
# CONFIG_BINFMT_SHARED_FLAT is not set
|
||||
# CONFIG_BINFMT_MISC is not set
|
||||
|
||||
#
|
||||
# Power management options (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_PM is not set
|
||||
|
||||
#
|
||||
# Networking
|
||||
#
|
||||
CONFIG_NET=y
|
||||
|
||||
#
|
||||
# Networking options
|
||||
#
|
||||
# CONFIG_NETDEBUG is not set
|
||||
# CONFIG_PACKET is not set
|
||||
# CONFIG_UNIX is not set
|
||||
CONFIG_XFRM=y
|
||||
# CONFIG_XFRM_USER is not set
|
||||
# CONFIG_XFRM_SUB_POLICY is not set
|
||||
# CONFIG_NET_KEY is not set
|
||||
CONFIG_INET=y
|
||||
# CONFIG_IP_MULTICAST is not set
|
||||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
CONFIG_IP_FIB_HASH=y
|
||||
# CONFIG_IP_PNP is not set
|
||||
# CONFIG_NET_IPIP is not set
|
||||
# CONFIG_NET_IPGRE is not set
|
||||
# CONFIG_ARPD is not set
|
||||
# CONFIG_SYN_COOKIES is not set
|
||||
# CONFIG_INET_AH is not set
|
||||
# CONFIG_INET_ESP is not set
|
||||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_XFRM_TUNNEL is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
CONFIG_INET_XFRM_MODE_TRANSPORT=y
|
||||
CONFIG_INET_XFRM_MODE_TUNNEL=y
|
||||
CONFIG_INET_XFRM_MODE_BEET=y
|
||||
# CONFIG_INET_DIAG is not set
|
||||
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||
CONFIG_TCP_CONG_CUBIC=y
|
||||
CONFIG_DEFAULT_TCP_CONG="cubic"
|
||||
# CONFIG_IPV6 is not set
|
||||
# CONFIG_INET6_XFRM_TUNNEL is not set
|
||||
# CONFIG_INET6_TUNNEL is not set
|
||||
# CONFIG_NETWORK_SECMARK is not set
|
||||
# CONFIG_NETFILTER is not set
|
||||
|
||||
#
|
||||
# DCCP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_DCCP is not set
|
||||
|
||||
#
|
||||
# SCTP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_SCTP is not set
|
||||
|
||||
#
|
||||
# TIPC Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_TIPC is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_BRIDGE is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
# CONFIG_DECNET is not set
|
||||
# CONFIG_LLC2 is not set
|
||||
# CONFIG_IPX is not set
|
||||
# CONFIG_ATALK is not set
|
||||
# CONFIG_X25 is not set
|
||||
# CONFIG_LAPB is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_IRDA is not set
|
||||
# CONFIG_BT is not set
|
||||
# CONFIG_IEEE80211 is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
# CONFIG_STANDALONE is not set
|
||||
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
|
||||
# CONFIG_SYS_HYPERVISOR is not set
|
||||
|
||||
#
|
||||
# Connector - unified userspace <-> kernelspace linker
|
||||
#
|
||||
# CONFIG_CONNECTOR is not set
|
||||
|
||||
#
|
||||
# Memory Technology Devices (MTD)
|
||||
#
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_DEBUG is not set
|
||||
# CONFIG_MTD_CONCAT is not set
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_REDBOOT_PARTS=y
|
||||
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
|
||||
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
|
||||
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
|
||||
# CONFIG_MTD_CMDLINE_PARTS is not set
|
||||
|
||||
#
|
||||
# User Modules And Translation Layers
|
||||
#
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
# CONFIG_FTL is not set
|
||||
# CONFIG_NFTL is not set
|
||||
# CONFIG_INFTL is not set
|
||||
# CONFIG_RFD_FTL is not set
|
||||
# CONFIG_SSFDC is not set
|
||||
|
||||
#
|
||||
# RAM/ROM/Flash chip drivers
|
||||
#
|
||||
CONFIG_MTD_CFI=y
|
||||
# CONFIG_MTD_JEDECPROBE is not set
|
||||
CONFIG_MTD_GEN_PROBE=y
|
||||
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
||||
CONFIG_MTD_CFI_I1=y
|
||||
CONFIG_MTD_CFI_I2=y
|
||||
# CONFIG_MTD_CFI_I4 is not set
|
||||
# CONFIG_MTD_CFI_I8 is not set
|
||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
# CONFIG_MTD_CFI_STAA is not set
|
||||
CONFIG_MTD_CFI_UTIL=y
|
||||
# CONFIG_MTD_RAM is not set
|
||||
# CONFIG_MTD_ROM is not set
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
# CONFIG_MTD_OBSOLETE_CHIPS is not set
|
||||
|
||||
#
|
||||
# Mapping drivers for chip access
|
||||
#
|
||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_PHYSMAP_START=0x20000000
|
||||
CONFIG_MTD_PHYSMAP_LEN=0x1000000
|
||||
CONFIG_MTD_PHYSMAP_BANKWIDTH=4
|
||||
# CONFIG_MTD_SOLUTIONENGINE is not set
|
||||
# CONFIG_MTD_UCLINUX is not set
|
||||
# CONFIG_MTD_PLATRAM is not set
|
||||
|
||||
#
|
||||
# Self-contained MTD device drivers
|
||||
#
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
# CONFIG_MTD_PHRAM is not set
|
||||
# CONFIG_MTD_MTDRAM is not set
|
||||
# CONFIG_MTD_BLOCK2MTD is not set
|
||||
|
||||
#
|
||||
# Disk-On-Chip Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_DOC2000 is not set
|
||||
# CONFIG_MTD_DOC2001 is not set
|
||||
# CONFIG_MTD_DOC2001PLUS is not set
|
||||
|
||||
#
|
||||
# NAND Flash Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_NAND is not set
|
||||
|
||||
#
|
||||
# OneNAND Flash Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_ONENAND is not set
|
||||
|
||||
#
|
||||
# Parallel port support
|
||||
#
|
||||
# CONFIG_PARPORT is not set
|
||||
|
||||
#
|
||||
# Plug and Play support
|
||||
#
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
# CONFIG_BLK_DEV_LOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=4096
|
||||
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
||||
# CONFIG_BLK_DEV_INITRD is not set
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
#
|
||||
# Misc devices
|
||||
#
|
||||
# CONFIG_TIFM_CORE is not set
|
||||
|
||||
#
|
||||
# ATA/ATAPI/MFM/RLL support
|
||||
#
|
||||
# CONFIG_IDE is not set
|
||||
|
||||
#
|
||||
# SCSI device support
|
||||
#
|
||||
# CONFIG_RAID_ATTRS is not set
|
||||
# CONFIG_SCSI is not set
|
||||
# CONFIG_SCSI_NETLINK is not set
|
||||
|
||||
#
|
||||
# Serial ATA (prod) and Parallel ATA (experimental) drivers
|
||||
#
|
||||
# CONFIG_ATA is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
# CONFIG_MD is not set
|
||||
|
||||
#
|
||||
# Fusion MPT device support
|
||||
#
|
||||
# CONFIG_FUSION is not set
|
||||
|
||||
#
|
||||
# IEEE 1394 (FireWire) support
|
||||
#
|
||||
|
||||
#
|
||||
# I2O device support
|
||||
#
|
||||
|
||||
#
|
||||
# Network device support
|
||||
#
|
||||
# CONFIG_NETDEVICES is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
#
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Telephony Support
|
||||
#
|
||||
# CONFIG_PHONE is not set
|
||||
|
||||
#
|
||||
# Input device support
|
||||
#
|
||||
# CONFIG_INPUT is not set
|
||||
|
||||
#
|
||||
# Hardware I/O ports
|
||||
#
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_GAMEPORT is not set
|
||||
|
||||
#
|
||||
# Character devices
|
||||
#
|
||||
# CONFIG_VT is not set
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
#
|
||||
# Serial drivers
|
||||
#
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
|
||||
#
|
||||
# Non-8250 serial port support
|
||||
#
|
||||
CONFIG_SERIAL_SH_SCI=y
|
||||
CONFIG_SERIAL_SH_SCI_NR_UARTS=4
|
||||
CONFIG_SERIAL_SH_SCI_CONSOLE=y
|
||||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
# CONFIG_UNIX98_PTYS is not set
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
|
||||
#
|
||||
# IPMI
|
||||
#
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
|
||||
#
|
||||
# Watchdog Cards
|
||||
#
|
||||
# CONFIG_WATCHDOG is not set
|
||||
CONFIG_HW_RANDOM=y
|
||||
# CONFIG_GEN_RTC is not set
|
||||
# CONFIG_DTLK is not set
|
||||
# CONFIG_R3964 is not set
|
||||
|
||||
#
|
||||
# Ftape, the floppy tape device driver
|
||||
#
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# TPM devices
|
||||
#
|
||||
# CONFIG_TCG_TPM is not set
|
||||
|
||||
#
|
||||
# I2C support
|
||||
#
|
||||
# CONFIG_I2C is not set
|
||||
|
||||
#
|
||||
# SPI support
|
||||
#
|
||||
# CONFIG_SPI is not set
|
||||
# CONFIG_SPI_MASTER is not set
|
||||
|
||||
#
|
||||
# Dallas's 1-wire bus
|
||||
#
|
||||
# CONFIG_W1 is not set
|
||||
|
||||
#
|
||||
# Hardware Monitoring support
|
||||
#
|
||||
CONFIG_HWMON=y
|
||||
# CONFIG_HWMON_VID is not set
|
||||
# CONFIG_SENSORS_ABITUGURU is not set
|
||||
# CONFIG_SENSORS_F71805F is not set
|
||||
# CONFIG_SENSORS_VT1211 is not set
|
||||
# CONFIG_HWMON_DEBUG_CHIP is not set
|
||||
|
||||
#
|
||||
# Multimedia devices
|
||||
#
|
||||
# CONFIG_VIDEO_DEV is not set
|
||||
|
||||
#
|
||||
# Digital Video Broadcasting Devices
|
||||
#
|
||||
# CONFIG_DVB is not set
|
||||
|
||||
#
|
||||
# Graphics support
|
||||
#
|
||||
CONFIG_FIRMWARE_EDID=y
|
||||
# CONFIG_FB is not set
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
# CONFIG_USB_ARCH_HAS_HCD is not set
|
||||
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
||||
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
|
||||
#
|
||||
# MMC/SD Card support
|
||||
#
|
||||
# CONFIG_MMC is not set
|
||||
|
||||
#
|
||||
# LED devices
|
||||
#
|
||||
# CONFIG_NEW_LEDS is not set
|
||||
|
||||
#
|
||||
# LED drivers
|
||||
#
|
||||
|
||||
#
|
||||
# LED Triggers
|
||||
#
|
||||
|
||||
#
|
||||
# InfiniBand support
|
||||
#
|
||||
|
||||
#
|
||||
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
|
||||
#
|
||||
|
||||
#
|
||||
# Real Time Clock
|
||||
#
|
||||
# CONFIG_RTC_CLASS is not set
|
||||
|
||||
#
|
||||
# DMA Engine support
|
||||
#
|
||||
# CONFIG_DMA_ENGINE is not set
|
||||
|
||||
#
|
||||
# DMA Clients
|
||||
#
|
||||
|
||||
#
|
||||
# DMA Devices
|
||||
#
|
||||
|
||||
#
|
||||
# File systems
|
||||
#
|
||||
CONFIG_EXT2_FS=y
|
||||
# CONFIG_EXT2_FS_XATTR is not set
|
||||
# CONFIG_EXT3_FS is not set
|
||||
# CONFIG_EXT4DEV_FS is not set
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
# CONFIG_FS_POSIX_ACL is not set
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_GFS2_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
CONFIG_ROMFS_FS=y
|
||||
# CONFIG_INOTIFY is not set
|
||||
# CONFIG_QUOTA is not set
|
||||
# CONFIG_DNOTIFY is not set
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
|
||||
#
|
||||
# CD-ROM/DVD Filesystems
|
||||
#
|
||||
# CONFIG_ISO9660_FS is not set
|
||||
# CONFIG_UDF_FS is not set
|
||||
|
||||
#
|
||||
# DOS/FAT/NT Filesystems
|
||||
#
|
||||
# CONFIG_MSDOS_FS is not set
|
||||
# CONFIG_VFAT_FS is not set
|
||||
# CONFIG_NTFS_FS is not set
|
||||
|
||||
#
|
||||
# Pseudo filesystems
|
||||
#
|
||||
CONFIG_PROC_FS=y
|
||||
CONFIG_PROC_SYSCTL=y
|
||||
# CONFIG_SYSFS is not set
|
||||
# CONFIG_TMPFS is not set
|
||||
# CONFIG_HUGETLBFS is not set
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
|
||||
#
|
||||
# Miscellaneous filesystems
|
||||
#
|
||||
# CONFIG_ADFS_FS is not set
|
||||
# CONFIG_AFFS_FS is not set
|
||||
# CONFIG_HFS_FS is not set
|
||||
# CONFIG_HFSPLUS_FS is not set
|
||||
# CONFIG_BEFS_FS is not set
|
||||
# CONFIG_BFS_FS is not set
|
||||
# CONFIG_EFS_FS is not set
|
||||
# CONFIG_JFFS_FS is not set
|
||||
# CONFIG_JFFS2_FS is not set
|
||||
CONFIG_CRAMFS=y
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_HPFS_FS is not set
|
||||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
|
||||
#
|
||||
# Network File Systems
|
||||
#
|
||||
# CONFIG_NFS_FS is not set
|
||||
# CONFIG_NFSD is not set
|
||||
# CONFIG_SMB_FS is not set
|
||||
# CONFIG_CIFS is not set
|
||||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
# CONFIG_9P_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
# CONFIG_NLS is not set
|
||||
|
||||
#
|
||||
# Profiling support
|
||||
#
|
||||
# CONFIG_PROFILING is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
CONFIG_ENABLE_MUST_CHECK=y
|
||||
# CONFIG_MAGIC_SYSRQ is not set
|
||||
# CONFIG_UNUSED_SYMBOLS is not set
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
# CONFIG_UNWIND_INFO is not set
|
||||
# CONFIG_HEADERS_CHECK is not set
|
||||
# CONFIG_SH_STANDARD_BIOS is not set
|
||||
# CONFIG_EARLY_SCIF_CONSOLE is not set
|
||||
# CONFIG_KGDB is not set
|
||||
|
||||
#
|
||||
# Security options
|
||||
#
|
||||
# CONFIG_KEYS is not set
|
||||
|
||||
#
|
||||
# Cryptographic options
|
||||
#
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
# Library routines
|
||||
#
|
||||
CONFIG_CRC_CCITT=y
|
||||
# CONFIG_CRC16 is not set
|
||||
CONFIG_CRC32=y
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
Loading…
Reference in New Issue