From f6826156025f610bf6236ef020f9ade90e043960 Mon Sep 17 00:00:00 2001 From: Alban Bedel Date: Thu, 19 Jun 2014 15:25:50 +0200 Subject: [PATCH] ARM: tegra: tamonten: add the display to the Medcom Wide Enable the RGB output and add the panel definition to the Medcom Wide DTS. Also add a label to the backlight defintion to reference it in the panel definition. Signed-off-by: Alban Bedel Signed-off-by: Stephen Warren --- arch/arm/boot/dts/tegra20-medcom-wide.dts | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts index 0318b84cb207..1b7c56b33aca 100644 --- a/arch/arm/boot/dts/tegra20-medcom-wide.dts +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -10,6 +10,15 @@ pwm@7000a000 { status = "okay"; }; + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + nvidia,panel = <&panel>; + }; + }; + }; + i2c@7000c000 { wm8903: wm8903@1a { compatible = "wlf,wm8903"; @@ -30,7 +39,7 @@ wm8903: wm8903@1a { }; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 5000000>; @@ -38,6 +47,15 @@ backlight { default-brightness-level = <6>; }; + panel: panel { + compatible = "innolux,n156bge-l21", "simple-panel"; + + power-supply = <&vdd_1v8_reg>, <&vdd_3v3_reg>; + enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>; + + backlight = <&backlight>; + }; + sound { compatible = "ad,tegra-audio-wm8903-medcom-wide", "nvidia,tegra-audio-wm8903";