mirror of https://gitee.com/openkylin/linux.git
spi/mpc52xx-psc-spi: check for valid PSC
This driver calls mpc52xx_set_psc_clkdiv() but doesn't check its return value to see if the PSC is actually valid for SPI use. Add the check and a hint for the user. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This commit is contained in:
parent
3c9059d79f
commit
f856cf0178
|
@ -314,11 +314,13 @@ static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps)
|
|||
struct mpc52xx_psc __iomem *psc = mps->psc;
|
||||
struct mpc52xx_psc_fifo __iomem *fifo = mps->fifo;
|
||||
u32 mclken_div;
|
||||
int ret = 0;
|
||||
int ret;
|
||||
|
||||
/* default sysclk is 512MHz */
|
||||
mclken_div = (mps->sysclk ? mps->sysclk : 512000000) / MCLK;
|
||||
mpc52xx_set_psc_clkdiv(psc_id, mclken_div);
|
||||
ret = mpc52xx_set_psc_clkdiv(psc_id, mclken_div);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* Reset the PSC into a known state */
|
||||
out_8(&psc->command, MPC52xx_PSC_RST_RX);
|
||||
|
@ -342,7 +344,7 @@ static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps)
|
|||
|
||||
mps->bits_per_word = 8;
|
||||
|
||||
return ret;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static irqreturn_t mpc52xx_psc_spi_isr(int irq, void *dev_id)
|
||||
|
@ -411,8 +413,10 @@ static int __init mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr,
|
|||
goto free_master;
|
||||
|
||||
ret = mpc52xx_psc_spi_port_config(master->bus_num, mps);
|
||||
if (ret < 0)
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "can't configure PSC! Is it capable of SPI?\n");
|
||||
goto free_irq;
|
||||
}
|
||||
|
||||
spin_lock_init(&mps->lock);
|
||||
init_completion(&mps->done);
|
||||
|
|
Loading…
Reference in New Issue