openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

sh: add r8a66597 usb1 gadget to the se7724 board 

Add USB gadget support for port CN26 on the Solution Engine 7724
board. The r8a66597-udc driver is hooked up as a platform device
and some registers are configured to enable the USB in gadget mode.
The hardware driving the USB port is the on-chip USB1 block in
the sh7724 processor configured as USB gadget controller.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
Magnus Damm 2009-08-19 09:52:02 +00:00 committed by Paul Mundt
parent 5a1c4cb5bc
commit f8f8c0797d
1 changed files with 33 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

33
arch/sh/boards/mach-se/7724/setup.c
View File

@ -341,6 +341,35 @@ static struct platform_device sh7724_usb0_host_device = {
.resource = sh7724_usb0_host_resources,
};
static struct r8a66597_platdata sh7724_usb1_gadget_data = {
.on_chip = 1,
};
static struct resource sh7724_usb1_gadget_resources[] = {
[0] = {
.start = 0xa4d90000,
.end = 0xa4d90123,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 66,
.end = 66,
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
},
};
static struct platform_device sh7724_usb1_gadget_device = {
.name = "r8a66597_udc",
.id = 1, /* USB1 */
.dev = {
.dma_mask = NULL, /* not use dma */
.coherent_dma_mask = 0xffffffff,
.platform_data = &sh7724_usb1_gadget_data,
},
.num_resources = ARRAY_SIZE(sh7724_usb1_gadget_resources),
.resource = sh7724_usb1_gadget_resources,
};
static struct platform_device *ms7724se_devices[] __initdata = {
&heartbeat_device,
&smc91x_eth_device,
@ -351,6 +380,7 @@ static struct platform_device *ms7724se_devices[] __initdata = {
&keysc_device,
&sh_eth_device,
&sh7724_usb0_host_device,
&sh7724_usb1_gadget_device,
};
#define EEPROM_OP 0xBA206000
@ -459,6 +489,9 @@ static int __init devices_setup(void)
/* enable USB0 port */
ctrl_outw(0x0600, 0xa40501d4);
/* enable USB1 port */
ctrl_outw(0x0600, 0xa4050192);
/* enable IRQ 0,1,2 */
gpio_request(GPIO_FN_INTC_IRQ0, NULL);
gpio_request(GPIO_FN_INTC_IRQ1, NULL);