GPIO changes for v3.6:

- New driver for AMD-8111 southbridge GPIOs
 - New driver for Wolfson Micro Arizona devices
 - Propagate device tree parse errors
 - Probe deferral finalizations - all expected calls to
   GPIO will now hopefully request deferral where apropriate
 - Misc updates to TCA6424, WM8994, LPC32xx, PCF857x, Samsung
   MXC, OMAP and PCA953X drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQEHMDAAoJEEEQszewGV1zwPYP/jkxBzvEl+iEO0RFwT4PtmCi
 Y8JOJNT1bw/3MHPcRT12E+gzj01S9GldbuaUObcudmnnynpjeC0S8JNhSKGD9uHa
 TTcCcMbZiKzJyZr/OL8EId7W1FGUO+51uB4hqEKCHMWRY/PBIjKxhvtj+BKEWyvn
 OVhWCxo2O7lv7rzeKiPc8WJMiodLS1urbZEyz7IADZtT3m8vu146rEQRvbNSSXa0
 AJfl494XX1sbv0tzYzvE66+vjvvkgsjHq3O7On5b2svdnZGpAL/6CjEUVrpBXr4K
 NPKuq9TsLfVMH3w3xvQ70PoA7M0L+KvKcdjTvgZpf2KLIU7dwoL91PzAupcjSTr1
 SkcTPtNFxuaRy0cFD+ZAwL2eIOGaNxk6N4tj1da35QjCUkNROHG5K6ByIL1e1ewO
 NuxAyn7QLrYdmXzBc5/DhZiBA0ShqoYg4oEgBDZklOKqjT3mqmjQbDq8i0Qy197W
 lb3Barg+WWm+NW1kmPYnrOJUZXa1ApVHuz8db7OrcUy5kTcUhVTY3DcQzFgG1CZT
 H284c9Zm8WaP814jE8SzLMGeFaCuI63xFMNkpnba11Bt+8Cr1I+LjWSd+ttCFdVm
 W9t/fMEX1bVpVrbTKMvcwm7AwnoeOUEwJCqAICLe5OE/1mEvanyjNXX4wfFP58jv
 OlQ/a9REqoOLAvvbV2qp
 =tujx
 -----END PGP SIGNATURE-----

Merge tag 'gpio-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO changes from Linus Walleij:
 - New driver for AMD-8111 southbridge GPIOs
 - New driver for Wolfson Micro Arizona devices
 - Propagate device tree parse errors
 - Probe deferral finalizations - all expected calls to GPIO will now
   hopefully request deferral where apropriate
 - Misc updates to TCA6424, WM8994, LPC32xx, PCF857x, Samsung MXC, OMAP
   and PCA953X drivers.

Fix up gpio_idx conflicts in drivers/gpio/gpio-mxc.c

* tag 'gpio-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available
  gpiolib: Defer failed gpio requests by default
  MAINTAINERS: add entry OMAP GPIO driver
  gpio/pca953x: increase variables size to support 24 bit of data
  GPIO: PCA953X: Increase size of invert variable to support 24 bit
  gpio/omap: move bank->dbck initialization to omap_gpio_mod_init()
  gpio/mxc: use the edge_sel feature if available
  gpio: propagate of_parse_phandle_with_args errors
  gpio: samsung: add flags specifier to device-tree binding
  gpiolib: Add support for Wolfson Microelectronics Arizona class devices
  gpio: gpio-lpc32xx: Add gpio_to_irq mapping
  gpio: pcf857x: share 8/16 bit access functions
  gpio: LPC32xx: Driver cleanup
  MAINTAINERS: Add Wolfson gpiolib drivers to the Wolfson entry
  gpiolib: wm8994: Convert to devm_kzalloc()
  gpiolib: wm8994: Use irq_domain mappings for gpios
  gpio: add a driver for GPIO pins found on AMD-8111 south bridge chips
  gpio/tca6424: merge I2C transactions, remove cast
  gpio/of: fix a typo of comment message

Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt

@@ -22,7 +22,7 @@ Required properties:
 Example:
 
 gpio0: gpio@73f84000 {
-	compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+	compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
 	reg = <0x73f84000 0x4000>;
 	interrupts = <50 51>;
 	gpio-controller;

Documentation/devicetree/bindings/gpio/gpio-samsung.txt

@@ -11,14 +11,15 @@ Required properties:
      <[phandle of the gpio controller node]
       [pin number within the gpio controller]
       [mux function]
-      [pull up/down]
+      [flags and pull up/down]
       [drive strength]>
 
   Values for gpio specifier:
   - Pin number: is a value between 0 to 7.
-  - Pull Up/Down: 0 - Pull Up/Down Disabled.
+  - Flags and Pull Up/Down: 0 - Pull Up/Down Disabled.
-                  1 - Pull Down Enabled.
+                            1 - Pull Down Enabled.
-                  3 - Pull Up Enabled.
+                            3 - Pull Up Enabled.
+          Bit 16 (0x00010000) - Input is active low.
   - Drive Strength: 0 - 1x,
                     1 - 3x,
                     2 - 2x,

MAINTAINERS

@@ -4961,6 +4961,13 @@ S:	Maintained
 F:	drivers/usb/*/*omap*
 F:	arch/arm/*omap*/usb*
 
+OMAP GPIO DRIVER
+M:	Santosh Shilimkar <santosh.shilimkar@ti.com>
+M:	Kevin Hilman <khilman@ti.com>
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	drivers/gpio/gpio-omap.c
+
 OMFS FILESYSTEM
 M:	Bob Copeland <me@bobcopeland.com>
 L:	linux-karma-devel@lists.sourceforge.net
@@ -7615,6 +7622,7 @@ F:	Documentation/hwmon/wm83??
 F:	arch/arm/mach-s3c64xx/mach-crag6410*
 F:	drivers/clk/clk-wm83*.c
 F:	drivers/leds/leds-wm83*.c
+F:	drivers/gpio/gpio-*wm*.c
 F:	drivers/hwmon/wm83??-hwmon.c
 F:	drivers/input/misc/wm831x-on.c
 F:	drivers/input/touchscreen/wm831x-ts.c

arch/arm/boot/dts/imx51.dtsi

@@ -127,7 +127,7 @@ esdhc@70024000 { /* ESDHC4 */
 			};
 
 			gpio1: gpio@73f84000 {
-				compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
 				reg = <0x73f84000 0x4000>;
 				interrupts = <50 51>;
 				gpio-controller;
@@ -137,7 +137,7 @@ gpio1: gpio@73f84000 {
 			};
 
 			gpio2: gpio@73f88000 {
-				compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
 				reg = <0x73f88000 0x4000>;
 				interrupts = <52 53>;
 				gpio-controller;
@@ -147,7 +147,7 @@ gpio2: gpio@73f88000 {
 			};
 
 			gpio3: gpio@73f8c000 {
-				compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
 				reg = <0x73f8c000 0x4000>;
 				interrupts = <54 55>;
 				gpio-controller;
@@ -157,7 +157,7 @@ gpio3: gpio@73f8c000 {
 			};
 
 			gpio4: gpio@73f90000 {
-				compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
 				reg = <0x73f90000 0x4000>;
 				interrupts = <56 57>;
 				gpio-controller;

arch/arm/boot/dts/imx53.dtsi

@@ -129,7 +129,7 @@ esdhc@50024000 { /* ESDHC4 */
 			};
 
 			gpio1: gpio@53f84000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 				reg = <0x53f84000 0x4000>;
 				interrupts = <50 51>;
 				gpio-controller;
@@ -139,7 +139,7 @@ gpio1: gpio@53f84000 {
 			};
 
 			gpio2: gpio@53f88000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 				reg = <0x53f88000 0x4000>;
 				interrupts = <52 53>;
 				gpio-controller;
@@ -149,7 +149,7 @@ gpio2: gpio@53f88000 {
 			};
 
 			gpio3: gpio@53f8c000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 				reg = <0x53f8c000 0x4000>;
 				interrupts = <54 55>;
 				gpio-controller;
@@ -159,7 +159,7 @@ gpio3: gpio@53f8c000 {
 			};
 
 			gpio4: gpio@53f90000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 				reg = <0x53f90000 0x4000>;
 				interrupts = <56 57>;
 				gpio-controller;
@@ -197,7 +197,7 @@ uart2: serial@53fc0000 {
 			};
 
 			gpio5: gpio@53fdc000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 				reg = <0x53fdc000 0x4000>;
 				interrupts = <103 104>;
 				gpio-controller;
@@ -207,7 +207,7 @@ gpio5: gpio@53fdc000 {
 			};
 
 			gpio6: gpio@53fe0000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 				reg = <0x53fe0000 0x4000>;
 				interrupts = <105 106>;
 				gpio-controller;
@@ -217,7 +217,7 @@ gpio6: gpio@53fe0000 {
 			};
 
 			gpio7: gpio@53fe4000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 				reg = <0x53fe4000 0x4000>;
 				interrupts = <107 108>;
 				gpio-controller;

arch/arm/boot/dts/imx6q.dtsi

@@ -277,7 +277,7 @@ gpt@02098000 {
 			};
 
 			gpio1: gpio@0209c000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x0209c000 0x4000>;
 				interrupts = <0 66 0x04 0 67 0x04>;
 				gpio-controller;
@@ -287,7 +287,7 @@ gpio1: gpio@0209c000 {
 			};
 
 			gpio2: gpio@020a0000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020a0000 0x4000>;
 				interrupts = <0 68 0x04 0 69 0x04>;
 				gpio-controller;
@@ -297,7 +297,7 @@ gpio2: gpio@020a0000 {
 			};
 
 			gpio3: gpio@020a4000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020a4000 0x4000>;
 				interrupts = <0 70 0x04 0 71 0x04>;
 				gpio-controller;
@@ -307,7 +307,7 @@ gpio3: gpio@020a4000 {
 			};
 
 			gpio4: gpio@020a8000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020a8000 0x4000>;
 				interrupts = <0 72 0x04 0 73 0x04>;
 				gpio-controller;
@@ -317,7 +317,7 @@ gpio4: gpio@020a8000 {
 			};
 
 			gpio5: gpio@020ac000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020ac000 0x4000>;
 				interrupts = <0 74 0x04 0 75 0x04>;
 				gpio-controller;
@@ -327,7 +327,7 @@ gpio5: gpio@020ac000 {
 			};
 
 			gpio6: gpio@020b0000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020b0000 0x4000>;
 				interrupts = <0 76 0x04 0 77 0x04>;
 				gpio-controller;
@@ -337,7 +337,7 @@ gpio6: gpio@020b0000 {
 			};
 
 			gpio7: gpio@020b4000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020b4000 0x4000>;
 				interrupts = <0 78 0x04 0 79 0x04>;
 				gpio-controller;

arch/arm/mach-imx/mm-imx25.c

@@ -89,11 +89,11 @@ static const struct resource imx25_audmux_res[] __initconst = {
 
 void __init imx25_soc_init(void)
 {
-	/* i.mx25 has the i.mx31 type gpio */
+	/* i.mx25 has the i.mx35 type gpio */
-	mxc_register_gpio("imx31-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
+	mxc_register_gpio("imx35-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
-	mxc_register_gpio("imx31-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
+	mxc_register_gpio("imx35-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
-	mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
+	mxc_register_gpio("imx35-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
-	mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
+	mxc_register_gpio("imx35-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
 
 	pinctrl_provide_dummies();
 	/* i.mx25 has the i.mx35 type sdma */

arch/arm/mach-imx/mm-imx3.c

@@ -272,10 +272,9 @@ void __init imx35_soc_init(void)
 
 	imx3_init_l2x0();
 
-	/* i.mx35 has the i.mx31 type gpio */
+	mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
-	mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
+	mxc_register_gpio("imx35-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
-	mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
+	mxc_register_gpio("imx35-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
-	mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
 
 	pinctrl_provide_dummies();
 	if (to_version == 1) {

arch/arm/mach-imx/mm-imx5.c

@@ -161,13 +161,13 @@ static const struct resource imx53_audmux_res[] __initconst = {
 
 void __init imx50_soc_init(void)
 {
-	/* i.mx50 has the i.mx31 type gpio */
+	/* i.mx50 has the i.mx35 type gpio */
-	mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
+	mxc_register_gpio("imx35-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
-	mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
+	mxc_register_gpio("imx35-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
-	mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
+	mxc_register_gpio("imx35-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
-	mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
+	mxc_register_gpio("imx35-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
-	mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
+	mxc_register_gpio("imx35-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
-	mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
+	mxc_register_gpio("imx35-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
 
 	/* i.mx50 has the i.mx31 type audmux */
 	platform_device_register_simple("imx31-audmux", 0, imx50_audmux_res,
@@ -176,11 +176,11 @@ void __init imx50_soc_init(void)
 
 void __init imx51_soc_init(void)
 {
-	/* i.mx51 has the i.mx31 type gpio */
+	/* i.mx51 has the i.mx35 type gpio */
-	mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH);
+	mxc_register_gpio("imx35-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH);
-	mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH);
+	mxc_register_gpio("imx35-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH);
-	mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
+	mxc_register_gpio("imx35-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
-	mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
+	mxc_register_gpio("imx35-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
 
 	pinctrl_provide_dummies();
 
@@ -198,14 +198,14 @@ void __init imx51_soc_init(void)
 
 void __init imx53_soc_init(void)
 {
-	/* i.mx53 has the i.mx31 type gpio */
+	/* i.mx53 has the i.mx35 type gpio */
-	mxc_register_gpio("imx31-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
+	mxc_register_gpio("imx35-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
-	mxc_register_gpio("imx31-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
+	mxc_register_gpio("imx35-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
-	mxc_register_gpio("imx31-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
+	mxc_register_gpio("imx35-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
-	mxc_register_gpio("imx31-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
+	mxc_register_gpio("imx35-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
-	mxc_register_gpio("imx31-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
+	mxc_register_gpio("imx35-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
-	mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
+	mxc_register_gpio("imx35-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
-	mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
+	mxc_register_gpio("imx35-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
 
 	pinctrl_provide_dummies();
 	/* i.mx53 has the i.mx35 type sdma */

drivers/gpio/Kconfig

@@ -253,6 +253,12 @@ config GPIO_GE_FPGA
 
 comment "I2C GPIO expanders:"
 
+config GPIO_ARIZONA
+	tristate "Wolfson Microelectronics Arizona class devices"
+	depends on MFD_ARIZONA
+	help
+	  Support for GPIOs on Wolfson Arizona class devices.
+
 config GPIO_MAX7300
 	tristate "Maxim MAX7300 GPIO expander"
 	depends on I2C
@@ -466,6 +472,18 @@ config GPIO_BT8XX
 
 	  If unsure, say N.
 
+config GPIO_AMD8111
+	tristate "AMD 8111 GPIO driver"
+	depends on PCI
+	help
+	  The AMD 8111 south bridge contains 32 GPIO pins which can be used.
+
+	  Note, that usually system firmware/ACPI handles GPIO pins on their
+	  own and users might easily break their systems with uncarefull usage
+	  of this driver!
+
+	  If unsure, say N
+
 config GPIO_LANGWELL
 	bool "Intel Langwell/Penwell GPIO support"
 	depends on PCI && X86

drivers/gpio/Makefile

@@ -12,6 +12,8 @@ obj-$(CONFIG_GPIO_74X164)	+= gpio-74x164.o
 obj-$(CONFIG_GPIO_AB8500)	+= gpio-ab8500.o
 obj-$(CONFIG_GPIO_ADP5520)	+= gpio-adp5520.o
 obj-$(CONFIG_GPIO_ADP5588)	+= gpio-adp5588.o
+obj-$(CONFIG_GPIO_AMD8111)	+= gpio-amd8111.o
+obj-$(CONFIG_GPIO_ARIZONA)	+= gpio-arizona.o
 obj-$(CONFIG_GPIO_BT8XX)	+= gpio-bt8xx.o
 obj-$(CONFIG_GPIO_CS5535)	+= gpio-cs5535.o
 obj-$(CONFIG_GPIO_DA9052)	+= gpio-da9052.o

drivers/gpio/gpio-amd8111.c

@@ -0,0 +1,246 @@
+/*
+ * GPIO driver for AMD 8111 south bridges
+ *
+ * Copyright (c) 2012 Dmitry Eremin-Solenikov
+ *
+ * Based on the AMD RNG driver:
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ * with the majority of the code coming from:
+ *
+ * Hardware driver for the Intel/AMD/VIA Random Number Generators (RNG)
+ * (c) Copyright 2003 Red Hat Inc <jgarzik@redhat.com>
+ *
+ * derived from
+ *
+ * Hardware driver for the AMD 768 Random Number Generator (RNG)
+ * (c) Copyright 2001 Red Hat Inc
+ *
+ * derived from
+ *
+ * Hardware driver for Intel i810 Random Number Generator (RNG)
+ * Copyright 2000,2001 Jeff Garzik <jgarzik@pobox.com>
+ * Copyright 2000,2001 Philipp Rumpf <prumpf@mandrakesoft.com>
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+
+#define PMBASE_OFFSET 0xb0
+#define PMBASE_SIZE   0x30
+
+#define AMD_REG_GPIO(i) (0x10 + (i))
+
+#define AMD_GPIO_LTCH_STS	0x40 /* Latch status, w1 */
+#define AMD_GPIO_RTIN		0x20 /* Real Time in, ro */
+#define AMD_GPIO_DEBOUNCE	0x10 /* Debounce, rw */
+#define AMD_GPIO_MODE_MASK	0x0c /* Pin Mode Select, rw */
+#define AMD_GPIO_MODE_IN	0x00
+#define AMD_GPIO_MODE_OUT	0x04
+/* Enable alternative (e.g. clkout, IRQ, etc) function of the pin */
+#define AMD_GPIO_MODE_ALTFN	0x08 /* Or 0x09 */
+#define AMD_GPIO_X_MASK		0x03 /* In/Out specific, rw */
+#define AMD_GPIO_X_IN_ACTIVEHI	0x01 /* Active High */
+#define AMD_GPIO_X_IN_LATCH	0x02 /* Latched version is selected */
+#define AMD_GPIO_X_OUT_LOW	0x00
+#define AMD_GPIO_X_OUT_HI	0x01
+#define AMD_GPIO_X_OUT_CLK0	0x02
+#define AMD_GPIO_X_OUT_CLK1	0x03
+
+/*
+ * Data for PCI driver interface
+ *
+ * This data only exists for exporting the supported
+ * PCI ids via MODULE_DEVICE_TABLE.  We do not actually
+ * register a pci_driver, because someone else might one day
+ * want to register another driver on the same PCI id.
+ */
+static DEFINE_PCI_DEVICE_TABLE(pci_tbl) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS), 0 },
+	{ 0, },	/* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, pci_tbl);
+
+struct amd_gpio {
+	struct gpio_chip	chip;
+	u32			pmbase;
+	void __iomem		*pm;
+	struct pci_dev		*pdev;
+	spinlock_t		lock; /* guards hw registers and orig table */
+	u8			orig[32];
+};
+
+#define to_agp(chip)	container_of(chip, struct amd_gpio, chip)
+
+static int amd_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct amd_gpio *agp = to_agp(chip);
+
+	agp->orig[offset] = ioread8(agp->pm + AMD_REG_GPIO(offset)) &
+		(AMD_GPIO_DEBOUNCE | AMD_GPIO_MODE_MASK | AMD_GPIO_X_MASK);
+
+	dev_dbg(&agp->pdev->dev, "Requested gpio %d, data %x\n", offset, agp->orig[offset]);
+
+	return 0;
+}
+
+static void amd_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct amd_gpio *agp = to_agp(chip);
+
+	dev_dbg(&agp->pdev->dev, "Freed gpio %d, data %x\n", offset, agp->orig[offset]);
+
+	iowrite8(agp->orig[offset], agp->pm + AMD_REG_GPIO(offset));
+}
+
+static void amd_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct amd_gpio *agp = to_agp(chip);
+	u8 temp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&agp->lock, flags);
+	temp = ioread8(agp->pm + AMD_REG_GPIO(offset));
+	temp = (temp & AMD_GPIO_DEBOUNCE) | AMD_GPIO_MODE_OUT | (value ? AMD_GPIO_X_OUT_HI : AMD_GPIO_X_OUT_LOW);
+	iowrite8(temp, agp->pm + AMD_REG_GPIO(offset));
+	spin_unlock_irqrestore(&agp->lock, flags);
+
+	dev_dbg(&agp->pdev->dev, "Setting gpio %d, value %d, reg=%02x\n", offset, !!value, temp);
+}
+
+static int amd_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct amd_gpio *agp = to_agp(chip);
+	u8 temp;
+
+	temp = ioread8(agp->pm + AMD_REG_GPIO(offset));
+
+	dev_dbg(&agp->pdev->dev, "Getting gpio %d, reg=%02x\n", offset, temp);
+
+	return (temp & AMD_GPIO_RTIN) ? 1 : 0;
+}
+
+static int amd_gpio_dirout(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct amd_gpio *agp = to_agp(chip);
+	u8 temp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&agp->lock, flags);
+	temp = ioread8(agp->pm + AMD_REG_GPIO(offset));
+	temp = (temp & AMD_GPIO_DEBOUNCE) | AMD_GPIO_MODE_OUT | (value ? AMD_GPIO_X_OUT_HI : AMD_GPIO_X_OUT_LOW);
+	iowrite8(temp, agp->pm + AMD_REG_GPIO(offset));
+	spin_unlock_irqrestore(&agp->lock, flags);
+
+	dev_dbg(&agp->pdev->dev, "Dirout gpio %d, value %d, reg=%02x\n", offset, !!value, temp);
+
+	return 0;
+}
+
+static int amd_gpio_dirin(struct gpio_chip *chip, unsigned offset)
+{
+	struct amd_gpio *agp = to_agp(chip);
+	u8 temp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&agp->lock, flags);
+	temp = ioread8(agp->pm + AMD_REG_GPIO(offset));
+	temp = (temp & AMD_GPIO_DEBOUNCE) | AMD_GPIO_MODE_IN;
+	iowrite8(temp, agp->pm + AMD_REG_GPIO(offset));
+	spin_unlock_irqrestore(&agp->lock, flags);
+
+	dev_dbg(&agp->pdev->dev, "Dirin gpio %d, reg=%02x\n", offset, temp);
+
+	return 0;
+}
+
+static struct amd_gpio gp = {
+	.chip = {
+		.label		= "AMD GPIO",
+		.owner		= THIS_MODULE,
+		.base		= -1,
+		.ngpio		= 32,
+		.request	= amd_gpio_request,
+		.free		= amd_gpio_free,
+		.set		= amd_gpio_set,
+		.get		= amd_gpio_get,
+		.direction_output = amd_gpio_dirout,
+		.direction_input = amd_gpio_dirin,
+	},
+};
+
+static int __init amd_gpio_init(void)
+{
+	int err = -ENODEV;
+	struct pci_dev *pdev = NULL;
+	const struct pci_device_id *ent;
+
+
+	/* We look for our device - AMD South Bridge
+	 * I don't know about a system with two such bridges,
+	 * so we can assume that there is max. one device.
+	 *
+	 * We can't use plain pci_driver mechanism,
+	 * as the device is really a multiple function device,
+	 * main driver that binds to the pci_device is an smbus
+	 * driver and have to find & bind to the device this way.
+	 */
+	for_each_pci_dev(pdev) {
+		ent = pci_match_id(pci_tbl, pdev);
+		if (ent)
+			goto found;
+	}
+	/* Device not found. */
+	goto out;
+
+found:
+	err = pci_read_config_dword(pdev, 0x58, &gp.pmbase);
+	if (err)
+		goto out;
+	err = -EIO;
+	gp.pmbase &= 0x0000FF00;
+	if (gp.pmbase == 0)
+		goto out;
+	if (!request_region(gp.pmbase + PMBASE_OFFSET, PMBASE_SIZE, "AMD GPIO")) {
+		dev_err(&pdev->dev, "AMD GPIO region 0x%x already in use!\n",
+			gp.pmbase + PMBASE_OFFSET);
+		err = -EBUSY;
+		goto out;
+	}
+	gp.pm = ioport_map(gp.pmbase + PMBASE_OFFSET, PMBASE_SIZE);
+	gp.pdev = pdev;
+	gp.chip.dev = &pdev->dev;
+
+	spin_lock_init(&gp.lock);
+
+	printk(KERN_INFO "AMD-8111 GPIO detected\n");
+	err = gpiochip_add(&gp.chip);
+	if (err) {
+		printk(KERN_ERR "GPIO registering failed (%d)\n",
+		       err);
+		release_region(gp.pmbase + PMBASE_OFFSET, PMBASE_SIZE);
+		goto out;
+	}
+out:
+	return err;
+}
+
+static void __exit amd_gpio_exit(void)
+{
+	int err = gpiochip_remove(&gp.chip);
+	WARN_ON(err);
+	ioport_unmap(gp.pm);
+	release_region(gp.pmbase + PMBASE_OFFSET, PMBASE_SIZE);
+}
+
+module_init(amd_gpio_init);
+module_exit(amd_gpio_exit);
+
+MODULE_AUTHOR("The Linux Kernel team");
+MODULE_DESCRIPTION("GPIO driver for AMD chipsets");
+MODULE_LICENSE("GPL");

drivers/gpio/gpio-arizona.c

@@ -0,0 +1,163 @@
+/*
+ * gpiolib support for Wolfson Arizona class devices
+ *
+ * Copyright 2012 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+
+#include <linux/mfd/arizona/core.h>
+#include <linux/mfd/arizona/pdata.h>
+#include <linux/mfd/arizona/registers.h>
+
+struct arizona_gpio {
+	struct arizona *arizona;
+	struct gpio_chip gpio_chip;
+};
+
+static inline struct arizona_gpio *to_arizona_gpio(struct gpio_chip *chip)
+{
+	return container_of(chip, struct arizona_gpio, gpio_chip);
+}
+
+static int arizona_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+	struct arizona_gpio *arizona_gpio = to_arizona_gpio(chip);
+	struct arizona *arizona = arizona_gpio->arizona;
+
+	return regmap_update_bits(arizona->regmap, ARIZONA_GPIO1_CTRL + offset,
+				  ARIZONA_GPN_DIR, ARIZONA_GPN_DIR);
+}
+
+static int arizona_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct arizona_gpio *arizona_gpio = to_arizona_gpio(chip);
+	struct arizona *arizona = arizona_gpio->arizona;
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(arizona->regmap, ARIZONA_GPIO1_CTRL + offset, &val);
+	if (ret < 0)
+		return ret;
+
+	if (val & ARIZONA_GPN_LVL)
+		return 1;
+	else
+		return 0;
+}
+
+static int arizona_gpio_direction_out(struct gpio_chip *chip,
+				     unsigned offset, int value)
+{
+	struct arizona_gpio *arizona_gpio = to_arizona_gpio(chip);
+	struct arizona *arizona = arizona_gpio->arizona;
+
+	if (value)
+		value = ARIZONA_GPN_LVL;
+
+	return regmap_update_bits(arizona->regmap, ARIZONA_GPIO1_CTRL + offset,
+				  ARIZONA_GPN_DIR | ARIZONA_GPN_LVL, value);
+}
+
+static void arizona_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct arizona_gpio *arizona_gpio = to_arizona_gpio(chip);
+	struct arizona *arizona = arizona_gpio->arizona;
+
+	if (value)
+		value = ARIZONA_GPN_LVL;
+
+	regmap_update_bits(arizona->regmap, ARIZONA_GPIO1_CTRL + offset,
+			   ARIZONA_GPN_LVL, value);
+}
+
+static struct gpio_chip template_chip = {
+	.label			= "arizona",
+	.owner			= THIS_MODULE,
+	.direction_input	= arizona_gpio_direction_in,
+	.get			= arizona_gpio_get,
+	.direction_output	= arizona_gpio_direction_out,
+	.set			= arizona_gpio_set,
+	.can_sleep		= 1,
+};
+
+static int __devinit arizona_gpio_probe(struct platform_device *pdev)
+{
+	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
+	struct arizona_pdata *pdata = arizona->dev->platform_data;
+	struct arizona_gpio *arizona_gpio;
+	int ret;
+
+	arizona_gpio = devm_kzalloc(&pdev->dev, sizeof(*arizona_gpio),
+				    GFP_KERNEL);
+	if (arizona_gpio == NULL)
+		return -ENOMEM;
+
+	arizona_gpio->arizona = arizona;
+	arizona_gpio->gpio_chip = template_chip;
+	arizona_gpio->gpio_chip.dev = &pdev->dev;
+
+	switch (arizona->type) {
+	case WM5102:
+	case WM5110:
+		arizona_gpio->gpio_chip.ngpio = 5;
+		break;
+	default:
+		dev_err(&pdev->dev, "Unknown chip variant %d\n",
+			arizona->type);
+		return -EINVAL;
+	}
+
+	if (pdata && pdata->gpio_base)
+		arizona_gpio->gpio_chip.base = pdata->gpio_base;
+	else
+		arizona_gpio->gpio_chip.base = -1;
+
+	ret = gpiochip_add(&arizona_gpio->gpio_chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n",
+			ret);
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, arizona_gpio);
+
+	return ret;
+
+err:
+	return ret;
+}
+
+static int __devexit arizona_gpio_remove(struct platform_device *pdev)
+{
+	struct arizona_gpio *arizona_gpio = platform_get_drvdata(pdev);
+
+	return gpiochip_remove(&arizona_gpio->gpio_chip);
+}
+
+static struct platform_driver arizona_gpio_driver = {
+	.driver.name	= "arizona-gpio",
+	.driver.owner	= THIS_MODULE,
+	.probe		= arizona_gpio_probe,
+	.remove		= __devexit_p(arizona_gpio_remove),
+};
+
+module_platform_driver(arizona_gpio_driver);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("GPIO interface for Arizona devices");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:arizona-gpio");

drivers/gpio/gpio-lpc32xx.c

@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-lpc32xx/gpiolib.c
+ * GPIO driver for LPC32xx SoC
  *
  * Author: Kevin Wells <kevin.wells@nxp.com>
  *
@@ -28,6 +28,7 @@
 #include <mach/hardware.h>
 #include <mach/platform.h>
 #include <mach/gpio-lpc32xx.h>
+#include <mach/irqs.h>
 
 #define LPC32XX_GPIO_P3_INP_STATE		_GPREG(0x000)
 #define LPC32XX_GPIO_P3_OUTP_SET		_GPREG(0x004)
@@ -367,6 +368,66 @@ static int lpc32xx_gpio_request(struct gpio_chip *chip, unsigned pin)
 	return -EINVAL;
 }
 
+static int lpc32xx_gpio_to_irq_p01(struct gpio_chip *chip, unsigned offset)
+{
+	return IRQ_LPC32XX_P0_P1_IRQ;
+}
+
+static const char lpc32xx_gpio_to_irq_gpio_p3_table[] = {
+	IRQ_LPC32XX_GPIO_00,
+	IRQ_LPC32XX_GPIO_01,
+	IRQ_LPC32XX_GPIO_02,
+	IRQ_LPC32XX_GPIO_03,
+	IRQ_LPC32XX_GPIO_04,
+	IRQ_LPC32XX_GPIO_05,
+};
+
+static int lpc32xx_gpio_to_irq_gpio_p3(struct gpio_chip *chip, unsigned offset)
+{
+	if (offset < ARRAY_SIZE(lpc32xx_gpio_to_irq_gpio_p3_table))
+		return lpc32xx_gpio_to_irq_gpio_p3_table[offset];
+	return -ENXIO;
+}
+
+static const char lpc32xx_gpio_to_irq_gpi_p3_table[] = {
+	IRQ_LPC32XX_GPI_00,
+	IRQ_LPC32XX_GPI_01,
+	IRQ_LPC32XX_GPI_02,
+	IRQ_LPC32XX_GPI_03,
+	IRQ_LPC32XX_GPI_04,
+	IRQ_LPC32XX_GPI_05,
+	IRQ_LPC32XX_GPI_06,
+	IRQ_LPC32XX_GPI_07,
+	IRQ_LPC32XX_GPI_08,
+	IRQ_LPC32XX_GPI_09,
+	-ENXIO, /* 10 */
+	-ENXIO, /* 11 */
+	-ENXIO, /* 12 */
+	-ENXIO, /* 13 */
+	-ENXIO, /* 14 */
+	-ENXIO, /* 15 */
+	-ENXIO, /* 16 */
+	-ENXIO, /* 17 */
+	-ENXIO, /* 18 */
+	IRQ_LPC32XX_GPI_19,
+	-ENXIO, /* 20 */
+	-ENXIO, /* 21 */
+	-ENXIO, /* 22 */
+	-ENXIO, /* 23 */
+	-ENXIO, /* 24 */
+	-ENXIO, /* 25 */
+	-ENXIO, /* 26 */
+	-ENXIO, /* 27 */
+	IRQ_LPC32XX_GPI_28,
+};
+
+static int lpc32xx_gpio_to_irq_gpi_p3(struct gpio_chip *chip, unsigned offset)
+{
+	if (offset < ARRAY_SIZE(lpc32xx_gpio_to_irq_gpi_p3_table))
+		return lpc32xx_gpio_to_irq_gpi_p3_table[offset];
+	return -ENXIO;
+}
+
 static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
 	{
 		.chip = {
@@ -376,6 +437,7 @@ static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
 			.direction_output	= lpc32xx_gpio_dir_output_p012,
 			.set			= lpc32xx_gpio_set_value_p012,
 			.request		= lpc32xx_gpio_request,
+			.to_irq			= lpc32xx_gpio_to_irq_p01,
 			.base			= LPC32XX_GPIO_P0_GRP,
 			.ngpio			= LPC32XX_GPIO_P0_MAX,
 			.names			= gpio_p0_names,
@@ -391,6 +453,7 @@ static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
 			.direction_output	= lpc32xx_gpio_dir_output_p012,
 			.set			= lpc32xx_gpio_set_value_p012,
 			.request		= lpc32xx_gpio_request,
+			.to_irq			= lpc32xx_gpio_to_irq_p01,
 			.base			= LPC32XX_GPIO_P1_GRP,
 			.ngpio			= LPC32XX_GPIO_P1_MAX,
 			.names			= gpio_p1_names,
@@ -421,6 +484,7 @@ static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
 			.direction_output	= lpc32xx_gpio_dir_output_p3,
 			.set			= lpc32xx_gpio_set_value_p3,
 			.request		= lpc32xx_gpio_request,
+			.to_irq			= lpc32xx_gpio_to_irq_gpio_p3,
 			.base			= LPC32XX_GPIO_P3_GRP,
 			.ngpio			= LPC32XX_GPIO_P3_MAX,
 			.names			= gpio_p3_names,
@@ -434,6 +498,7 @@ static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
 			.direction_input	= lpc32xx_gpio_dir_in_always,
 			.get			= lpc32xx_gpi_get_value,
 			.request		= lpc32xx_gpio_request,
+			.to_irq			= lpc32xx_gpio_to_irq_gpi_p3,
 			.base			= LPC32XX_GPI_P3_GRP,
 			.ngpio			= LPC32XX_GPI_P3_MAX,
 			.names			= gpi_p3_names,
@@ -457,13 +522,6 @@ static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
 	},
 };
 
-/* Empty now, can be removed later when mach-lpc32xx is finally switched over
- * to DT support
- */
-void __init lpc32xx_gpio_init(void)
-{
-}
-
 static int lpc32xx_of_xlate(struct gpio_chip *gc,
 			    const struct of_phandle_args *gpiospec, u32 *flags)
 {

drivers/gpio/gpio-mxc.c

@@ -37,7 +37,8 @@
 enum mxc_gpio_hwtype {
 	IMX1_GPIO,	/* runs on i.mx1 */
 	IMX21_GPIO,	/* runs on i.mx21 and i.mx27 */
-	IMX31_GPIO,	/* runs on all other i.mx */
+	IMX31_GPIO,	/* runs on i.mx31 */
+	IMX35_GPIO,	/* runs on all other i.mx */
 };
 
 /* device type dependent stuff */
@@ -49,6 +50,7 @@ struct mxc_gpio_hwdata {
 	unsigned icr2_reg;
 	unsigned imr_reg;
 	unsigned isr_reg;
+	int edge_sel_reg;
 	unsigned low_level;
 	unsigned high_level;
 	unsigned rise_edge;
@@ -73,6 +75,7 @@ static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = {
 	.icr2_reg	= 0x2c,
 	.imr_reg	= 0x30,
 	.isr_reg	= 0x34,
+	.edge_sel_reg	= -EINVAL,
 	.low_level	= 0x03,
 	.high_level	= 0x02,
 	.rise_edge	= 0x00,
@@ -87,6 +90,22 @@ static struct mxc_gpio_hwdata imx31_gpio_hwdata = {
 	.icr2_reg	= 0x10,
 	.imr_reg	= 0x14,
 	.isr_reg	= 0x18,
+	.edge_sel_reg	= -EINVAL,
+	.low_level	= 0x00,
+	.high_level	= 0x01,
+	.rise_edge	= 0x02,
+	.fall_edge	= 0x03,
+};
+
+static struct mxc_gpio_hwdata imx35_gpio_hwdata = {
+	.dr_reg		= 0x00,
+	.gdir_reg	= 0x04,
+	.psr_reg	= 0x08,
+	.icr1_reg	= 0x0c,
+	.icr2_reg	= 0x10,
+	.imr_reg	= 0x14,
+	.isr_reg	= 0x18,
+	.edge_sel_reg	= 0x1c,
 	.low_level	= 0x00,
 	.high_level	= 0x01,
 	.rise_edge	= 0x02,
@@ -103,12 +122,13 @@ static struct mxc_gpio_hwdata *mxc_gpio_hwdata;
 #define GPIO_ICR2		(mxc_gpio_hwdata->icr2_reg)
 #define GPIO_IMR		(mxc_gpio_hwdata->imr_reg)
 #define GPIO_ISR		(mxc_gpio_hwdata->isr_reg)
+#define GPIO_EDGE_SEL		(mxc_gpio_hwdata->edge_sel_reg)
 
 #define GPIO_INT_LOW_LEV	(mxc_gpio_hwdata->low_level)
 #define GPIO_INT_HIGH_LEV	(mxc_gpio_hwdata->high_level)
 #define GPIO_INT_RISE_EDGE	(mxc_gpio_hwdata->rise_edge)
 #define GPIO_INT_FALL_EDGE	(mxc_gpio_hwdata->fall_edge)
-#define GPIO_INT_NONE		0x4
+#define GPIO_INT_BOTH_EDGES	0x4
 
 static struct platform_device_id mxc_gpio_devtype[] = {
 	{
@@ -120,6 +140,9 @@ static struct platform_device_id mxc_gpio_devtype[] = {
 	}, {
 		.name = "imx31-gpio",
 		.driver_data = IMX31_GPIO,
+	}, {
+		.name = "imx35-gpio",
+		.driver_data = IMX35_GPIO,
 	}, {
 		/* sentinel */
 	}
@@ -129,6 +152,7 @@ static const struct of_device_id mxc_gpio_dt_ids[] = {
 	{ .compatible = "fsl,imx1-gpio", .data = &mxc_gpio_devtype[IMX1_GPIO], },
 	{ .compatible = "fsl,imx21-gpio", .data = &mxc_gpio_devtype[IMX21_GPIO], },
 	{ .compatible = "fsl,imx31-gpio", .data = &mxc_gpio_devtype[IMX31_GPIO], },
+	{ .compatible = "fsl,imx35-gpio", .data = &mxc_gpio_devtype[IMX35_GPIO], },
 	{ /* sentinel */ }
 };
 
@@ -160,15 +184,19 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
 		edge = GPIO_INT_FALL_EDGE;
 		break;
 	case IRQ_TYPE_EDGE_BOTH:
-		val = gpio_get_value(gpio);
+		if (GPIO_EDGE_SEL >= 0) {
-		if (val) {
+			edge = GPIO_INT_BOTH_EDGES;
-			edge = GPIO_INT_LOW_LEV;
-			pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
 		} else {
-			edge = GPIO_INT_HIGH_LEV;
+			val = gpio_get_value(gpio);
-			pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
+			if (val) {
+				edge = GPIO_INT_LOW_LEV;
+				pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
+			} else {
+				edge = GPIO_INT_HIGH_LEV;
+				pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
+			}
+			port->both_edges |= 1 << gpio_idx;
 		}
-		port->both_edges |= 1 << gpio_idx;
 		break;
 	case IRQ_TYPE_LEVEL_LOW:
 		edge = GPIO_INT_LOW_LEV;
@@ -180,10 +208,23 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
 		return -EINVAL;
 	}
 
-	reg += GPIO_ICR1 + ((gpio_idx & 0x10) >> 2); /* ICR1 or ICR2 */
+	if (GPIO_EDGE_SEL >= 0) {
-	bit = gpio_idx & 0xf;
+		val = readl(port->base + GPIO_EDGE_SEL);
-	val = readl(reg) & ~(0x3 << (bit << 1));
+		if (edge == GPIO_INT_BOTH_EDGES)
-	writel(val | (edge << (bit << 1)), reg);
+			writel(val | (1 << gpio_idx),
+				port->base + GPIO_EDGE_SEL);
+		else
+			writel(val & ~(1 << gpio_idx),
+				port->base + GPIO_EDGE_SEL);
+	}
+
+	if (edge != GPIO_INT_BOTH_EDGES) {
+		reg += GPIO_ICR1 + ((gpio_idx & 0x10) >> 2); /* lower or upper register */
+		bit = gpio_idx & 0xf;
+		val = readl(reg) & ~(0x3 << (bit << 1));
+		writel(val | (edge << (bit << 1)), reg);
+	}
+
 	writel(1 << gpio_idx, port->base + GPIO_ISR);
 
 	return 0;
@@ -335,7 +376,9 @@ static void __devinit mxc_gpio_get_hw(struct platform_device *pdev)
 		return;
 	}
 
-	if (hwtype == IMX31_GPIO)
+	if (hwtype == IMX35_GPIO)
+		mxc_gpio_hwdata = &imx35_gpio_hwdata;
+	else if (hwtype == IMX31_GPIO)
 		mxc_gpio_hwdata = &imx31_gpio_hwdata;
 	else
 		mxc_gpio_hwdata = &imx1_imx21_gpio_hwdata;

drivers/gpio/gpio-omap.c

@@ -899,12 +899,6 @@ static int gpio_debounce(struct gpio_chip *chip, unsigned offset,
 
 	bank = container_of(chip, struct gpio_bank, chip);
 
-	if (!bank->dbck) {
-		bank->dbck = clk_get(bank->dev, "dbclk");
-		if (IS_ERR(bank->dbck))
-			dev_err(bank->dev, "Could not get gpio dbck\n");
-	}
-
 	spin_lock_irqsave(&bank->lock, flags);
 	_set_gpio_debounce(bank, offset, debounce);
 	spin_unlock_irqrestore(&bank->lock, flags);
@@ -976,6 +970,10 @@ static void omap_gpio_mod_init(struct gpio_bank *bank)
 	 /* Initialize interface clk ungated, module enabled */
 	if (bank->regs->ctrl)
 		__raw_writel(0, base + bank->regs->ctrl);
+
+	bank->dbck = clk_get(bank->dev, "dbclk");
+	if (IS_ERR(bank->dbck))
+		dev_err(bank->dev, "Could not get gpio dbck\n");
 }
 
 static __devinit void

drivers/gpio/gpio-pca953x.c

@@ -78,10 +78,10 @@ struct pca953x_chip {
 
 #ifdef CONFIG_GPIO_PCA953X_IRQ
 	struct mutex irq_lock;
-	uint16_t irq_mask;
+	u32 irq_mask;
-	uint16_t irq_stat;
+	u32 irq_stat;
-	uint16_t irq_trig_raise;
+	u32 irq_trig_raise;
-	uint16_t irq_trig_fall;
+	u32 irq_trig_fall;
 	int	 irq_base;
 #endif
 
@@ -98,12 +98,11 @@ static int pca953x_write_reg(struct pca953x_chip *chip, int reg, u32 val)
 	if (chip->gpio_chip.ngpio <= 8)
 		ret = i2c_smbus_write_byte_data(chip->client, reg, val);
 	else if (chip->gpio_chip.ngpio == 24) {
-		ret = i2c_smbus_write_word_data(chip->client,
+		cpu_to_le32s(&val);
+		ret = i2c_smbus_write_i2c_block_data(chip->client,
 						(reg << 2) | REG_ADDR_AI,
-						val & 0xffff);
+						3,
-		ret = i2c_smbus_write_byte_data(chip->client,
+						(u8 *) &val);
-						(reg << 2) + 2,
-						(val & 0xff0000) >> 16);
 	}
 	else {
 		switch (chip->chip_type) {
@@ -135,22 +134,27 @@ static int pca953x_read_reg(struct pca953x_chip *chip, int reg, u32 *val)
 {
 	int ret;
 
-	if (chip->gpio_chip.ngpio <= 8)
+	if (chip->gpio_chip.ngpio <= 8) {
 		ret = i2c_smbus_read_byte_data(chip->client, reg);
-	else if (chip->gpio_chip.ngpio == 24) {
+		*val = ret;
-		ret =  i2c_smbus_read_word_data(chip->client, reg << 2);
-		ret |= (i2c_smbus_read_byte_data(chip->client,
-						 (reg << 2) + 2)<<16);
 	}
-	else
+	else if (chip->gpio_chip.ngpio == 24) {
+		*val = 0;
+		ret = i2c_smbus_read_i2c_block_data(chip->client,
+						(reg << 2) | REG_ADDR_AI,
+						3,
+						(u8 *) val);
+		le32_to_cpus(val);
+	} else {
 		ret = i2c_smbus_read_word_data(chip->client, reg << 1);
+		*val = ret;
+	}
 
 	if (ret < 0) {
 		dev_err(&chip->client->dev, "failed reading register\n");
 		return ret;
 	}
 
-	*val = (u32)ret;
 	return 0;
 }
 
@@ -349,8 +353,8 @@ static void pca953x_irq_bus_lock(struct irq_data *d)
 static void pca953x_irq_bus_sync_unlock(struct irq_data *d)
 {
 	struct pca953x_chip *chip = irq_data_get_irq_chip_data(d);
-	uint16_t new_irqs;
+	u32 new_irqs;
-	uint16_t level;
+	u32 level;
 
 	/* Look for any newly setup interrupt */
 	new_irqs = chip->irq_trig_fall | chip->irq_trig_raise;
@@ -368,8 +372,8 @@ static void pca953x_irq_bus_sync_unlock(struct irq_data *d)
 static int pca953x_irq_set_type(struct irq_data *d, unsigned int type)
 {
 	struct pca953x_chip *chip = irq_data_get_irq_chip_data(d);
-	uint16_t level = d->irq - chip->irq_base;
+	u32 level = d->irq - chip->irq_base;
-	uint16_t mask = 1 << level;
+	u32 mask = 1 << level;
 
 	if (!(type & IRQ_TYPE_EDGE_BOTH)) {
 		dev_err(&chip->client->dev, "irq %d: unsupported type %d\n",
@@ -399,12 +403,12 @@ static struct irq_chip pca953x_irq_chip = {
 	.irq_set_type		= pca953x_irq_set_type,
 };
 
-static uint16_t pca953x_irq_pending(struct pca953x_chip *chip)
+static u32 pca953x_irq_pending(struct pca953x_chip *chip)
 {
 	u32 cur_stat;
-	uint16_t old_stat;
+	u32 old_stat;
-	uint16_t pending;
+	u32 pending;
-	uint16_t trigger;
+	u32 trigger;
 	int ret, offset = 0;
 
 	switch (chip->chip_type) {
@@ -440,8 +444,8 @@ static uint16_t pca953x_irq_pending(struct pca953x_chip *chip)
 static irqreturn_t pca953x_irq_handler(int irq, void *devid)
 {
 	struct pca953x_chip *chip = devid;
-	uint16_t pending;
+	u32 pending;
-	uint16_t level;
+	u32 level;
 
 	pending = pca953x_irq_pending(chip);
 
@@ -564,7 +568,7 @@ static void pca953x_irq_teardown(struct pca953x_chip *chip)
  * WARNING: This is DEPRECATED and will be removed eventually!
  */
 static void
-pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert)
+pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, u32 *invert)
 {
 	struct device_node *node;
 	const __be32 *val;
@@ -592,13 +596,13 @@ pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert)
 }
 #else
 static void
-pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert)
+pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, u32 *invert)
 {
 	*gpio_base = -1;
 }
 #endif
 
-static int __devinit device_pca953x_init(struct pca953x_chip *chip, int invert)
+static int __devinit device_pca953x_init(struct pca953x_chip *chip, u32 invert)
 {
 	int ret;
 
@@ -617,7 +621,7 @@ static int __devinit device_pca953x_init(struct pca953x_chip *chip, int invert)
 	return ret;
 }
 
-static int __devinit device_pca957x_init(struct pca953x_chip *chip, int invert)
+static int __devinit device_pca957x_init(struct pca953x_chip *chip, u32 invert)
 {
 	int ret;
 	u32 val = 0;
@@ -653,8 +657,9 @@ static int __devinit pca953x_probe(struct i2c_client *client,
 {
 	struct pca953x_platform_data *pdata;
 	struct pca953x_chip *chip;
-	int irq_base=0, invert=0;
+	int irq_base = 0;
 	int ret;
+	u32 invert = 0;
 
 	chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL);
 	if (chip == NULL)

drivers/gpio/gpio-pcf857x.c

@@ -61,61 +61,28 @@ struct pcf857x {
 	struct i2c_client	*client;
 	struct mutex		lock;		/* protect 'out' */
 	unsigned		out;		/* software latch */
+
+	int (*write)(struct i2c_client *client, unsigned data);
+	int (*read)(struct i2c_client *client);
 };
 
 /*-------------------------------------------------------------------------*/
 
 /* Talk to 8-bit I/O expander */
 
-static int pcf857x_input8(struct gpio_chip *chip, unsigned offset)
+static int i2c_write_le8(struct i2c_client *client, unsigned data)
 {
-	struct pcf857x	*gpio = container_of(chip, struct pcf857x, chip);
+	return i2c_smbus_write_byte(client, data);
-	int		status;
-
-	mutex_lock(&gpio->lock);
-	gpio->out |= (1 << offset);
-	status = i2c_smbus_write_byte(gpio->client, gpio->out);
-	mutex_unlock(&gpio->lock);
-
-	return status;
 }
 
-static int pcf857x_get8(struct gpio_chip *chip, unsigned offset)
+static int i2c_read_le8(struct i2c_client *client)
 {
-	struct pcf857x	*gpio = container_of(chip, struct pcf857x, chip);
+	return (int)i2c_smbus_read_byte(client);
-	s32		value;
-
-	value = i2c_smbus_read_byte(gpio->client);
-	return (value < 0) ? 0 : (value & (1 << offset));
 }
 
-static int pcf857x_output8(struct gpio_chip *chip, unsigned offset, int value)
-{
-	struct pcf857x	*gpio = container_of(chip, struct pcf857x, chip);
-	unsigned	bit = 1 << offset;
-	int		status;
-
-	mutex_lock(&gpio->lock);
-	if (value)
-		gpio->out |= bit;
-	else
-		gpio->out &= ~bit;
-	status = i2c_smbus_write_byte(gpio->client, gpio->out);
-	mutex_unlock(&gpio->lock);
-
-	return status;
-}
-
-static void pcf857x_set8(struct gpio_chip *chip, unsigned offset, int value)
-{
-	pcf857x_output8(chip, offset, value);
-}
-
-/*-------------------------------------------------------------------------*/
-
 /* Talk to 16-bit I/O expander */
 
-static int i2c_write_le16(struct i2c_client *client, u16 word)
+static int i2c_write_le16(struct i2c_client *client, unsigned word)
 {
 	u8 buf[2] = { word & 0xff, word >> 8, };
 	int status;
@@ -135,29 +102,31 @@ static int i2c_read_le16(struct i2c_client *client)
 	return (buf[1] << 8) | buf[0];
 }
 
-static int pcf857x_input16(struct gpio_chip *chip, unsigned offset)
+/*-------------------------------------------------------------------------*/
+
+static int pcf857x_input(struct gpio_chip *chip, unsigned offset)
 {
 	struct pcf857x	*gpio = container_of(chip, struct pcf857x, chip);
 	int		status;
 
 	mutex_lock(&gpio->lock);
 	gpio->out |= (1 << offset);
-	status = i2c_write_le16(gpio->client, gpio->out);
+	status = gpio->write(gpio->client, gpio->out);
 	mutex_unlock(&gpio->lock);
 
 	return status;
 }
 
-static int pcf857x_get16(struct gpio_chip *chip, unsigned offset)
+static int pcf857x_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct pcf857x	*gpio = container_of(chip, struct pcf857x, chip);
 	int		value;
 
-	value = i2c_read_le16(gpio->client);
+	value = gpio->read(gpio->client);
 	return (value < 0) ? 0 : (value & (1 << offset));
 }
 
-static int pcf857x_output16(struct gpio_chip *chip, unsigned offset, int value)
+static int pcf857x_output(struct gpio_chip *chip, unsigned offset, int value)
 {
 	struct pcf857x	*gpio = container_of(chip, struct pcf857x, chip);
 	unsigned	bit = 1 << offset;
@@ -168,15 +137,15 @@ static int pcf857x_output16(struct gpio_chip *chip, unsigned offset, int value)
 		gpio->out |= bit;
 	else
 		gpio->out &= ~bit;
-	status = i2c_write_le16(gpio->client, gpio->out);
+	status = gpio->write(gpio->client, gpio->out);
 	mutex_unlock(&gpio->lock);
 
 	return status;
 }
 
-static void pcf857x_set16(struct gpio_chip *chip, unsigned offset, int value)
+static void pcf857x_set(struct gpio_chip *chip, unsigned offset, int value)
 {
-	pcf857x_output16(chip, offset, value);
+	pcf857x_output(chip, offset, value);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -200,10 +169,15 @@ static int pcf857x_probe(struct i2c_client *client,
 
 	mutex_init(&gpio->lock);
 
-	gpio->chip.base = pdata ? pdata->gpio_base : -1;
+	gpio->chip.base			= pdata ? pdata->gpio_base : -1;
-	gpio->chip.can_sleep = 1;
+	gpio->chip.can_sleep		= 1;
-	gpio->chip.dev = &client->dev;
+	gpio->chip.dev			= &client->dev;
-	gpio->chip.owner = THIS_MODULE;
+	gpio->chip.owner		= THIS_MODULE;
+	gpio->chip.get			= pcf857x_get;
+	gpio->chip.set			= pcf857x_set;
+	gpio->chip.direction_input	= pcf857x_input;
+	gpio->chip.direction_output	= pcf857x_output;
+	gpio->chip.ngpio		= id->driver_data;
 
 	/* NOTE:  the OnSemi jlc1562b is also largely compatible with
 	 * these parts, notably for output.  It has a low-resolution
@@ -216,12 +190,9 @@ static int pcf857x_probe(struct i2c_client *client,
 	 *
 	 * NOTE: we don't distinguish here between *4 and *4a parts.
 	 */
-	gpio->chip.ngpio = id->driver_data;
 	if (gpio->chip.ngpio == 8) {
-		gpio->chip.direction_input = pcf857x_input8;
+		gpio->write	= i2c_write_le8;
-		gpio->chip.get = pcf857x_get8;
+		gpio->read	= i2c_read_le8;
-		gpio->chip.direction_output = pcf857x_output8;
-		gpio->chip.set = pcf857x_set8;
 
 		if (!i2c_check_functionality(client->adapter,
 				I2C_FUNC_SMBUS_BYTE))
@@ -238,10 +209,8 @@ static int pcf857x_probe(struct i2c_client *client,
 	 * NOTE: we don't distinguish here between '75 and '75c parts.
 	 */
 	} else if (gpio->chip.ngpio == 16) {
-		gpio->chip.direction_input = pcf857x_input16;
+		gpio->write	= i2c_write_le16;
-		gpio->chip.get = pcf857x_get16;
+		gpio->read	= i2c_read_le16;
-		gpio->chip.direction_output = pcf857x_output16;
-		gpio->chip.set = pcf857x_set16;
 
 		if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
 			status = -EIO;

drivers/gpio/gpio-samsung.c

@@ -2681,11 +2681,14 @@ static int exynos_gpio_xlate(struct gpio_chip *gc,
 
 	if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(gpiospec->args[1])))
 		pr_warn("gpio_xlate: failed to set pin function\n");
-	if (s3c_gpio_setpull(pin, gpiospec->args[2]))
+	if (s3c_gpio_setpull(pin, gpiospec->args[2] & 0xffff))
 		pr_warn("gpio_xlate: failed to set pin pull up/down\n");
 	if (s5p_gpio_set_drvstr(pin, gpiospec->args[3]))
 		pr_warn("gpio_xlate: failed to set pin drive strength\n");
 
+	if (flags)
+		*flags = gpiospec->args[2] >> 16;
+
 	return gpiospec->args[0];
 }
 

drivers/gpio/gpio-wm8994.c

@@ -19,6 +19,7 @@
 #include <linux/mfd/core.h>
 #include <linux/platform_device.h>
 #include <linux/seq_file.h>
+#include <linux/regmap.h>
 
 #include <linux/mfd/wm8994/core.h>
 #include <linux/mfd/wm8994/pdata.h>
@@ -112,10 +113,7 @@ static int wm8994_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 	struct wm8994_gpio *wm8994_gpio = to_wm8994_gpio(chip);
 	struct wm8994 *wm8994 = wm8994_gpio->wm8994;
 
-	if (!wm8994->irq_base)
+	return regmap_irq_get_virq(wm8994->irq_data, offset);
-		return -EINVAL;
-
-	return wm8994->irq_base + offset;
 }
 
 
@@ -254,7 +252,8 @@ static int __devinit wm8994_gpio_probe(struct platform_device *pdev)
 	struct wm8994_gpio *wm8994_gpio;
 	int ret;
 
-	wm8994_gpio = kzalloc(sizeof(*wm8994_gpio), GFP_KERNEL);
+	wm8994_gpio = devm_kzalloc(&pdev->dev, sizeof(*wm8994_gpio),
+				   GFP_KERNEL);
 	if (wm8994_gpio == NULL)
 		return -ENOMEM;
 
@@ -279,20 +278,14 @@ static int __devinit wm8994_gpio_probe(struct platform_device *pdev)
 	return ret;
 
 err:
-	kfree(wm8994_gpio);
 	return ret;
 }
 
 static int __devexit wm8994_gpio_remove(struct platform_device *pdev)
 {
 	struct wm8994_gpio *wm8994_gpio = platform_get_drvdata(pdev);
-	int ret;
 
-	ret = gpiochip_remove(&wm8994_gpio->gpio_chip);
+	return gpiochip_remove(&wm8994_gpio->gpio_chip);
-	if (ret == 0)
-		kfree(wm8994_gpio);
-
-	return ret;
 }
 
 static struct platform_driver wm8994_gpio_driver = {

drivers/gpio/gpiolib-of.c

@@ -21,7 +21,7 @@
 #include <linux/of_gpio.h>
 #include <linux/slab.h>
 
-/* Private data structure for of_gpiochip_is_match */
+/* Private data structure for of_gpiochip_find_and_xlate */
 struct gg_data {
 	enum of_gpio_flags *flags;
 	struct of_phandle_args gpiospec;
@@ -62,7 +62,10 @@ static int of_gpiochip_find_and_xlate(struct gpio_chip *gc, void *data)
 int of_get_named_gpio_flags(struct device_node *np, const char *propname,
                            int index, enum of_gpio_flags *flags)
 {
-	struct gg_data gg_data = { .flags = flags, .out_gpio = -ENODEV };
+	/* Return -EPROBE_DEFER to support probe() functions to be called
+	 * later when the GPIO actually becomes available
+	 */
+	struct gg_data gg_data = { .flags = flags, .out_gpio = -EPROBE_DEFER };
 	int ret;
 
 	/* .of_xlate might decide to not fill in the flags, so clear it. */
@@ -73,7 +76,7 @@ int of_get_named_gpio_flags(struct device_node *np, const char *propname,
 					 &gg_data.gpiospec);
 	if (ret) {
 		pr_debug("%s: can't parse gpios property\n", __func__);
-		return -EINVAL;
+		return ret;
 	}
 
 	gpiochip_find(&gg_data, of_gpiochip_find_and_xlate);

drivers/gpio/gpiolib.c

@@ -1186,7 +1186,7 @@ int gpio_request(unsigned gpio, const char *label)
 {
 	struct gpio_desc	*desc;
 	struct gpio_chip	*chip;
-	int			status = -EINVAL;
+	int			status = -EPROBE_DEFER;
 	unsigned long		flags;
 
 	spin_lock_irqsave(&gpio_lock, flags);

include/linux/i2c/pca953x.h

@@ -11,7 +11,7 @@ struct pca953x_platform_data {
 	unsigned	gpio_base;
 
 	/* initial polarity inversion setting */
-	uint16_t	invert;
+	u32		invert;
 
 	/* interrupt base */
 	int		irq_base;