From f9a5a9d89ffac4da32c156879b57d573bc89117c Mon Sep 17 00:00:00 2001 From: David Ahern Date: Mon, 21 May 2018 10:26:57 -0700 Subject: [PATCH] selftests: fib_tests: Add ipv6 route add append replace tests Add IPv6 route tests covering add, append and replace permutations. Assumes the ability to add a basic single path route works; this is required for example when adding an address to an interface. $ fib_tests.sh -t ipv6_rt IPv6 route add / append tests TEST: Attempt to add duplicate route - gw [ OK ] TEST: Attempt to add duplicate route - dev only [ OK ] TEST: Attempt to add duplicate route - reject route [ OK ] TEST: Add new route for existing prefix (w/o NLM_F_EXCL) [ OK ] TEST: Append nexthop to existing route - gw [ OK ] TEST: Append nexthop to existing route - dev only [ OK ] TEST: Append nexthop to existing route - reject route [ OK ] TEST: Append nexthop to existing reject route - gw [ OK ] TEST: Append nexthop to existing reject route - dev only [ OK ] TEST: Add multipath route [ OK ] TEST: Attempt to add duplicate multipath route [ OK ] TEST: Route add with different metrics [ OK ] TEST: Route delete with metric [ OK ] IPv6 route replace tests TEST: Single path with single path [ OK ] TEST: Single path with multipath [ OK ] TEST: Single path with reject route [ OK ] TEST: Single path with single path via multipath attribute [ OK ] TEST: Invalid nexthop [ OK ] TEST: Single path - replace of non-existent route [ OK ] TEST: Multipath with multipath [ OK ] TEST: Multipath with single path [ OK ] TEST: Multipath with single path via multipath attribute [ OK ] TEST: Multipath with reject route [ OK ] TEST: Multipath - invalid first nexthop [ OK ] TEST: Multipath - invalid second nexthop [ OK ] TEST: Multipath - replace of non-existent route [ OK ] Signed-off-by: David Ahern Signed-off-by: David S. Miller --- tools/testing/selftests/net/fib_tests.sh | 335 ++++++++++++++++++++++- 1 file changed, 334 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh index 12b648826151..384828f28372 100755 --- a/tools/testing/selftests/net/fib_tests.sh +++ b/tools/testing/selftests/net/fib_tests.sh @@ -6,7 +6,7 @@ ret=0 -TESTS="unregister down carrier nexthop" +TESTS="unregister down carrier nexthop ipv6_rt" VERBOSE=0 PAUSE_ON_FAIL=no PAUSE=no @@ -573,6 +573,338 @@ fib_nexthop_test() cleanup } +################################################################################ +# Tests on route add and replace + +run_cmd() +{ + local cmd="$1" + local out + local stderr="2>/dev/null" + + if [ "$VERBOSE" = "1" ]; then + printf " COMMAND: $cmd\n" + stderr= + fi + + out=$(eval $cmd $stderr) + rc=$? + if [ "$VERBOSE" = "1" -a -n "$out" ]; then + echo " $out" + fi + + [ "$VERBOSE" = "1" ] && echo + + return $rc +} + +# add route for a prefix, flushing any existing routes first +# expected to be the first step of a test +add_route6() +{ + local pfx="$1" + local nh="$2" + local out + + if [ "$VERBOSE" = "1" ]; then + echo + echo " ##################################################" + echo + fi + + run_cmd "$IP -6 ro flush ${pfx}" + [ $? -ne 0 ] && exit 1 + + out=$($IP -6 ro ls match ${pfx}) + if [ -n "$out" ]; then + echo "Failed to flush routes for prefix used for tests." + exit 1 + fi + + run_cmd "$IP -6 ro add ${pfx} ${nh}" + if [ $? -ne 0 ]; then + echo "Failed to add initial route for test." + exit 1 + fi +} + +# add initial route - used in replace route tests +add_initial_route6() +{ + add_route6 "2001:db8:104::/64" "$1" +} + +check_route6() +{ + local pfx="2001:db8:104::/64" + local expected="$1" + local out + local rc=0 + + out=$($IP -6 ro ls match ${pfx} | sed -e 's/ pref medium//') + if [ -z "${out}" ]; then + if [ "$VERBOSE" = "1" ]; then + printf "\nNo route entry found\n" + printf "Expected:\n" + printf " ${expected}\n" + fi + return 1 + fi + + # tricky way to convert output to 1-line without ip's + # messy '\'; this drops all extra white space + out=$(echo ${out}) + if [ "${out}" != "${expected}" ]; then + rc=1 + if [ "${VERBOSE}" = "1" ]; then + printf " Unexpected route entry. Have:\n" + printf " ${out}\n" + printf " Expected:\n" + printf " ${expected}\n\n" + fi + fi + + return $rc +} + +route_cleanup() +{ + $IP li del red 2>/dev/null + $IP li del dummy1 2>/dev/null + $IP li del veth1 2>/dev/null + $IP li del veth3 2>/dev/null + + cleanup &> /dev/null +} + +route_setup() +{ + route_cleanup + setup + + [ "${VERBOSE}" = "1" ] && set -x + set -e + + $IP li add red up type vrf table 101 + $IP li add veth1 type veth peer name veth2 + $IP li add veth3 type veth peer name veth4 + + $IP li set veth1 up + $IP li set veth3 up + $IP li set veth2 vrf red up + $IP li set veth4 vrf red up + $IP li add dummy1 type dummy + $IP li set dummy1 vrf red up + + $IP -6 addr add 2001:db8:101::1/64 dev veth1 + $IP -6 addr add 2001:db8:101::2/64 dev veth2 + $IP -6 addr add 2001:db8:103::1/64 dev veth3 + $IP -6 addr add 2001:db8:103::2/64 dev veth4 + $IP -6 addr add 2001:db8:104::1/64 dev dummy1 + + set +ex +} + +# assumption is that basic add of a single path route works +# otherwise just adding an address on an interface is broken +ipv6_rt_add() +{ + local rc + + echo + echo "IPv6 route add / append tests" + + # route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL + add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" + run_cmd "$IP -6 ro add 2001:db8:104::/64 via 2001:db8:103::2" + log_test $? 2 "Attempt to add duplicate route - gw" + + # route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL + add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" + run_cmd "$IP -6 ro add 2001:db8:104::/64 dev veth3" + log_test $? 2 "Attempt to add duplicate route - dev only" + + # route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL + add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" + run_cmd "$IP -6 ro add unreachable 2001:db8:104::/64" + log_test $? 2 "Attempt to add duplicate route - reject route" + + # iproute2 prepend only sets NLM_F_CREATE + # - adds a new route; does NOT convert existing route to ECMP + add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" + run_cmd "$IP -6 ro prepend 2001:db8:104::/64 via 2001:db8:103::2" + check_route6 "2001:db8:104::/64 via 2001:db8:101::2 dev veth1 metric 1024 2001:db8:104::/64 via 2001:db8:103::2 dev veth3 metric 1024" + log_test $? 0 "Add new route for existing prefix (w/o NLM_F_EXCL)" + + # route append with same prefix adds a new route + # - iproute2 sets NLM_F_CREATE | NLM_F_APPEND + add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" + run_cmd "$IP -6 ro append 2001:db8:104::/64 via 2001:db8:103::2" + check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" + log_test $? 0 "Append nexthop to existing route - gw" + + add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" + run_cmd "$IP -6 ro append 2001:db8:104::/64 dev veth3" + check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop dev veth3 weight 1" + log_test $? 0 "Append nexthop to existing route - dev only" + + # multipath route can not have a nexthop that is a reject route + add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" + run_cmd "$IP -6 ro append unreachable 2001:db8:104::/64" + log_test $? 2 "Append nexthop to existing route - reject route" + + # reject route can not be converted to multipath route + run_cmd "$IP -6 ro flush 2001:db8:104::/64" + run_cmd "$IP -6 ro add unreachable 2001:db8:104::/64" + run_cmd "$IP -6 ro append 2001:db8:104::/64 via 2001:db8:103::2" + log_test $? 2 "Append nexthop to existing reject route - gw" + + run_cmd "$IP -6 ro flush 2001:db8:104::/64" + run_cmd "$IP -6 ro add unreachable 2001:db8:104::/64" + run_cmd "$IP -6 ro append 2001:db8:104::/64 dev veth3" + log_test $? 2 "Append nexthop to existing reject route - dev only" + + # insert mpath directly + add_route6 "2001:db8:104::/64" "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" + log_test $? 0 "Add multipath route" + + add_route6 "2001:db8:104::/64" "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + run_cmd "$IP -6 ro add 2001:db8:104::/64 nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + log_test $? 2 "Attempt to add duplicate multipath route" + + # insert of a second route without append but different metric + add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" + run_cmd "$IP -6 ro add 2001:db8:104::/64 via 2001:db8:103::2 metric 512" + rc=$? + if [ $rc -eq 0 ]; then + run_cmd "$IP -6 ro add 2001:db8:104::/64 via 2001:db8:103::3 metric 256" + rc=$? + fi + log_test $rc 0 "Route add with different metrics" + + run_cmd "$IP -6 ro del 2001:db8:104::/64 metric 512" + rc=$? + if [ $rc -eq 0 ]; then + check_route6 "2001:db8:104::/64 via 2001:db8:103::3 dev veth3 metric 256 2001:db8:104::/64 via 2001:db8:101::2 dev veth1 metric 1024" + rc=$? + fi + log_test $rc 0 "Route delete with metric" +} + +ipv6_rt_replace_single() +{ + # single path with single path + # + add_initial_route6 "via 2001:db8:101::2" + run_cmd "$IP -6 ro replace 2001:db8:104::/64 via 2001:db8:103::2" + check_route6 "2001:db8:104::/64 via 2001:db8:103::2 dev veth3 metric 1024" + log_test $? 0 "Single path with single path" + + # single path with multipath + # + add_initial_route6 "nexthop via 2001:db8:101::2" + run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:103::2" + check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::3 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" + log_test $? 0 "Single path with multipath" + + # single path with reject + # + add_initial_route6 "nexthop via 2001:db8:101::2" + run_cmd "$IP -6 ro replace unreachable 2001:db8:104::/64" + check_route6 "unreachable 2001:db8:104::/64 dev lo metric 1024" + log_test $? 0 "Single path with reject route" + + # single path with single path using MULTIPATH attribute + # + add_initial_route6 "via 2001:db8:101::2" + run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:103::2" + check_route6 "2001:db8:104::/64 via 2001:db8:103::2 dev veth3 metric 1024" + log_test $? 0 "Single path with single path via multipath attribute" + + # route replace fails - invalid nexthop + add_initial_route6 "via 2001:db8:101::2" + run_cmd "$IP -6 ro replace 2001:db8:104::/64 via 2001:db8:104::2" + if [ $? -eq 0 ]; then + # previous command is expected to fail so if it returns 0 + # that means the test failed. + log_test 0 1 "Invalid nexthop" + else + check_route6 "2001:db8:104::/64 via 2001:db8:101::2 dev veth1 metric 1024" + log_test $? 0 "Invalid nexthop" + fi + + # replace non-existent route + # - note use of change versus replace since ip adds NLM_F_CREATE + # for replace + add_initial_route6 "via 2001:db8:101::2" + run_cmd "$IP -6 ro change 2001:db8:105::/64 via 2001:db8:101::2" + log_test $? 2 "Single path - replace of non-existent route" +} + +ipv6_rt_replace_mpath() +{ + # multipath with multipath + add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:103::3" + check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::3 dev veth1 weight 1 nexthop via 2001:db8:103::3 dev veth3 weight 1" + log_test $? 0 "Multipath with multipath" + + # multipath with single + add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + run_cmd "$IP -6 ro replace 2001:db8:104::/64 via 2001:db8:101::3" + check_route6 "2001:db8:104::/64 via 2001:db8:101::3 dev veth1 metric 1024" + log_test $? 0 "Multipath with single path" + + # multipath with single + add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3" + check_route6 "2001:db8:104::/64 via 2001:db8:101::3 dev veth1 metric 1024" + log_test $? 0 "Multipath with single path via multipath attribute" + + # multipath with reject + add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + run_cmd "$IP -6 ro replace unreachable 2001:db8:104::/64" + check_route6 "unreachable 2001:db8:104::/64 dev lo metric 1024" + log_test $? 0 "Multipath with reject route" + + # route replace fails - invalid nexthop 1 + add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:111::3 nexthop via 2001:db8:103::3" + check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" + log_test $? 0 "Multipath - invalid first nexthop" + + # route replace fails - invalid nexthop 2 + add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:113::3" + check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" + log_test $? 0 "Multipath - invalid second nexthop" + + # multipath non-existent route + add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + run_cmd "$IP -6 ro change 2001:db8:105::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:103::3" + log_test $? 2 "Multipath - replace of non-existent route" +} + +ipv6_rt_replace() +{ + echo + echo "IPv6 route replace tests" + + ipv6_rt_replace_single + ipv6_rt_replace_mpath +} + +ipv6_route_test() +{ + route_setup + + ipv6_rt_add + ipv6_rt_replace + + route_cleanup +} + ################################################################################ # usage @@ -635,6 +967,7 @@ do fib_down_test|down) fib_down_test;; fib_carrier_test|carrier) fib_carrier_test;; fib_nexthop_test|nexthop) fib_nexthop_test;; + ipv6_route_test|ipv6_rt) ipv6_route_test;; help) echo "Test names: $TESTS"; exit 0;; esac