imx-features-board-20120411

-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJPi887AAoJEPFlmONMx+ezT3kQAK7CNsXsfKfXGce8jpFHcIkp
 UB20Xp4TUdBYIR4+z8UyizLcXxVSefIXdAqthHf7NNKEmN1AI8sbil0EO+/dnDae
 Psskexl43Fy6d3KUYdCpzeXwTZ9TXOWQpNZOtRzsLL1sjWcyqZCTEI6+NA7ZaDw7
 YBfP8ZKcVfDSI1/2j8rRQULf6KSki9xC5aSfWoWwUGLxRIxuGjTpHnMAQH5iGq2T
 fAGQCrWchcdPWNWlTNmSqXF5wCF7dGTZBhdyfkvrjaU5Zbg1GVpcUv9FgpMXye6R
 2N0h7QLFxnKTyIPbWxSbvaOOZr6HvoObPvK12trApA5IWjJXtOKXhYF7hcZzWAcK
 p8xAgObP8aZ2GBOEj+UqIuvniRASCi7TSgl6pJukf7eVR5KVGlrODlxMTXGeupQl
 rVXln1FR10LCjvedC/3ocL6xAr39KsxTKuCXuHgwo26ZInseeE6/LoMlaLIhhNM6
 NqwqTlcwKPtxqumAOqGE1X8OFMjrns/nEQ2FIoMXKmMYyXGjNiVfeRCJNxCoNHaj
 rNHY0wVSHbDSeIcOjt0wZ4cCe6DXA2JIfhyczW+rN6rdvxrCwp5lWqZWMekZfhZi
 jkSfE2qqhQd9wG/Lq65CPYVT0EvNLdxU8OVOp/uL++xYtC65jtVdP2ZLQfcLIbIT
 V4pn5L4f2iNECo0RBQ47
 =CXzC
 -----END PGP SIGNATURE-----

Merge tag 'imx-features-board-20120411-2' of git://git.pengutronix.de/git/imx/linux-2.6 into next/boards

* tag 'imx-features-board-20120411-2' of git://git.pengutronix.de/git/imx/linux-2.6:
  ARM i.MX: Visstrim_M10: Add board version detection.
  ARM: imx_v4_v5_defconfig: enable adc and touch driver of mc13783
  ARM: i.MX: i.MX35-PDK: Add regulator support

arch/arm/configs/imx_v4_v5_defconfig

@@ -92,6 +92,7 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
+CONFIG_TOUCHSCREEN_MC13783=m
 # CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=m
@@ -107,7 +108,8 @@ CONFIG_SPI_SPIDEV=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
-# CONFIG_HWMON is not set
+CONFIG_HWMON=m
+CONFIG_SENSORS_MC13783_ADC=m
 CONFIG_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_MFD_MC13XXX=y

arch/arm/mach-imx/mach-imx27_visstrim_m10.c

@@ -38,6 +38,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
+#include <asm/system.h>
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>
 
@@ -48,6 +49,14 @@
 #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
 #define SDHC1_IRQ IRQ_GPIOB(25)
 
+#define MOTHERBOARD_BIT2	(GPIO_PORTD + 31)
+#define MOTHERBOARD_BIT1	(GPIO_PORTD + 30)
+#define MOTHERBOARD_BIT0	(GPIO_PORTD + 29)
+
+#define EXPBOARD_BIT2		(GPIO_PORTD + 25)
+#define EXPBOARD_BIT1		(GPIO_PORTD + 27)
+#define EXPBOARD_BIT0		(GPIO_PORTD + 28)
+
 static const int visstrim_m10_pins[] __initconst = {
 	/* UART1 (console) */
 	PE12_PF_UART1_TXD,
@@ -119,6 +128,23 @@ static const int visstrim_m10_pins[] __initconst = {
 	PB19_PF_CSI_D7,
 	PB20_PF_CSI_VSYNC,
 	PB21_PF_CSI_HSYNC,
+	/* mother board version */
+	MOTHERBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+	MOTHERBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+	MOTHERBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+	/* expansion board version */
+	EXPBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+	EXPBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+	EXPBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+};
+
+static struct gpio visstrim_m10_version_gpios[] = {
+	{ EXPBOARD_BIT0, GPIOF_IN, "exp-version-0" },
+	{ EXPBOARD_BIT1, GPIOF_IN, "exp-version-1" },
+	{ EXPBOARD_BIT2, GPIOF_IN, "exp-version-2" },
+	{ MOTHERBOARD_BIT0, GPIOF_IN, "mother-version-0" },
+	{ MOTHERBOARD_BIT1, GPIOF_IN, "mother-version-1" },
+	{ MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" },
 };
 
 /* Camera */
@@ -369,11 +395,40 @@ static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = {
 	.flags			= IMX_SSI_DMA | IMX_SSI_SYN,
 };
 
+static void __init visstrim_m10_revision(void)
+{
+	int exp_version = 0;
+	int mo_version = 0;
+	int ret;
+
+	ret = gpio_request_array(visstrim_m10_version_gpios,
+				 ARRAY_SIZE(visstrim_m10_version_gpios));
+	if (ret) {
+		pr_err("Failed to request version gpios");
+		return;
+	}
+
+	/* Get expansion board version (negative logic) */
+	exp_version |= !gpio_get_value(EXPBOARD_BIT2) << 2;
+	exp_version |= !gpio_get_value(EXPBOARD_BIT1) << 1;
+	exp_version |= !gpio_get_value(EXPBOARD_BIT0);
+
+	/* Get mother board version (negative logic) */
+	mo_version |= !gpio_get_value(MOTHERBOARD_BIT2) << 2;
+	mo_version |= !gpio_get_value(MOTHERBOARD_BIT1) << 1;
+	mo_version |= !gpio_get_value(MOTHERBOARD_BIT0);
+
+	system_rev = 0x27000;
+	system_rev |= (mo_version << 4);
+	system_rev |= exp_version;
+}
+
 static void __init visstrim_m10_board_init(void)
 {
 	int ret;
 
 	imx27_soc_init();
+	visstrim_m10_revision();
 
 	ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins,
 			ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10");

arch/arm/mach-imx/mach-mx35_3ds.c

@@ -34,6 +34,8 @@
 #include <linux/usb/otg.h>
 
 #include <linux/mtd/physmap.h>
+#include <linux/mfd/mc13892.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -253,6 +255,8 @@ static iomux_v3_cfg_t mx35pdk_pads[] = {
 	MX35_PAD_CSI_MCLK__IPU_CSI_MCLK,
 	MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK,
 	MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC,
+	/*PMIC IRQ*/
+	MX35_PAD_GPIO2_0__GPIO2_0,
 };
 
 /*
@@ -317,6 +321,193 @@ static struct platform_device mx35_3ds_ov2640 = {
 	},
 };
 
+static struct regulator_consumer_supply sw1_consumers[] = {
+	{
+		.supply = "cpu_vcc",
+	}
+};
+
+static struct regulator_consumer_supply vcam_consumers[] = {
+	/* sgtl5000 */
+	REGULATOR_SUPPLY("VDDA", "0-000a"),
+};
+
+static struct regulator_consumer_supply vaudio_consumers[] = {
+	REGULATOR_SUPPLY("cmos_vio", "soc-camera-pdrv.0"),
+};
+
+static struct regulator_init_data sw1_init = {
+	.constraints = {
+		.name = "SW1",
+		.min_uV = 600000,
+		.max_uV = 1375000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.valid_modes_mask = 0,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
+	.consumer_supplies = sw1_consumers,
+};
+
+static struct regulator_init_data sw2_init = {
+	.constraints = {
+		.name = "SW2",
+		.always_on = 1,
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data sw3_init = {
+	.constraints = {
+		.name = "SW3",
+		.always_on = 1,
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data sw4_init = {
+	.constraints = {
+		.name = "SW4",
+		.always_on = 1,
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data viohi_init = {
+	.constraints = {
+		.name = "VIOHI",
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vusb_init = {
+	.constraints = {
+		.name = "VUSB",
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vdig_init = {
+	.constraints = {
+		.name = "VDIG",
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vpll_init = {
+	.constraints = {
+		.name = "VPLL",
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vusb2_init = {
+	.constraints = {
+		.name = "VUSB2",
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vvideo_init = {
+	.constraints = {
+		.name = "VVIDEO",
+		.boot_on = 1
+	}
+};
+
+static struct regulator_init_data vaudio_init = {
+	.constraints = {
+		.name = "VAUDIO",
+		.min_uV = 2300000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.boot_on = 1
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vaudio_consumers),
+	.consumer_supplies = vaudio_consumers,
+};
+
+static struct regulator_init_data vcam_init = {
+	.constraints = {
+		.name = "VCAM",
+		.min_uV = 2500000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+					REGULATOR_CHANGE_MODE,
+		.valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
+		.boot_on = 1
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vcam_consumers),
+	.consumer_supplies = vcam_consumers,
+};
+
+static struct regulator_init_data vgen1_init = {
+	.constraints = {
+		.name = "VGEN1",
+	}
+};
+
+static struct regulator_init_data vgen2_init = {
+	.constraints = {
+		.name = "VGEN2",
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vgen3_init = {
+	.constraints = {
+		.name = "VGEN3",
+	}
+};
+
+static struct mc13xxx_regulator_init_data mx35_3ds_regulators[] = {
+	{ .id = MC13892_SW1, .init_data = &sw1_init },
+	{ .id = MC13892_SW2, .init_data = &sw2_init },
+	{ .id = MC13892_SW3, .init_data = &sw3_init },
+	{ .id = MC13892_SW4, .init_data = &sw4_init },
+	{ .id = MC13892_VIOHI, .init_data = &viohi_init },
+	{ .id = MC13892_VPLL, .init_data = &vpll_init },
+	{ .id = MC13892_VDIG, .init_data = &vdig_init },
+	{ .id = MC13892_VUSB2, .init_data = &vusb2_init },
+	{ .id = MC13892_VVIDEO, .init_data = &vvideo_init },
+	{ .id = MC13892_VAUDIO, .init_data = &vaudio_init },
+	{ .id = MC13892_VCAM, .init_data = &vcam_init },
+	{ .id = MC13892_VGEN1, .init_data = &vgen1_init },
+	{ .id = MC13892_VGEN2, .init_data = &vgen2_init },
+	{ .id = MC13892_VGEN3, .init_data = &vgen3_init },
+	{ .id = MC13892_VUSB, .init_data = &vusb_init },
+};
+
+static struct mc13xxx_platform_data mx35_3ds_mc13892_data = {
+	.flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
+	.regulators = {
+		.num_regulators = ARRAY_SIZE(mx35_3ds_regulators),
+		.regulators = mx35_3ds_regulators,
+	},
+};
+
+#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
+
+static struct i2c_board_info mx35_3ds_i2c_mc13892 = {
+
+	I2C_BOARD_INFO("mc13892", 0x08),
+	.platform_data = &mx35_3ds_mc13892_data,
+	.irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
+};
+
+static void __init imx35_3ds_init_mc13892(void)
+{
+	int ret = gpio_request_one(GPIO_PMIC_INT, GPIOF_DIR_IN, "pmic irq");
+
+	if (ret) {
+		pr_err("failed to get pmic irq: %d\n", ret);
+		return;
+	}
+
+	i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1);
+}
+
 static int mx35_3ds_otg_init(struct platform_device *pdev)
 {
 	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
@@ -412,6 +603,8 @@ static void __init mx35_3ds_init(void)
 	imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata);
 	mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev;
 	platform_device_register(&mx35_3ds_lcd);
+
+	imx35_3ds_init_mc13892();
 }
 
 static void __init mx35pdk_timer_init(void)