Commit Graph

79 Commits

Author SHA1 Message Date
Andrew Vasquez 00b6bd2516 [SCSI] qla2xxx: Trace-Control naming cleanups.
In preparation for FCE (Fibre Channel Event) tracing support.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 11:29:32 -06:00
Marcus Barrow 0b05a1f0d6 [SCSI] qla2xxx: Use completion routines.
Instead of abusing the semaphore interfaces for mailbox command
completions.

Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 11:29:31 -06:00
Andrew Vasquez 3776541d8a [SCSI] qla2xxx: Fix for 32-bit platforms with 64-bit resources.
The driver stores the contents of PCI resources into unsigned
long's before ioremapping. This breaks on 32-bit platforms which
support 64-bit MMIO resources.

Correct code by removing the temporary variables used during MMIO
PIO mapping and using resource_size_t where applicable.  Also
correct a small typo in a printk() where the wrong region number
was displayed.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 11:29:29 -06:00
Andrew Vasquez 43ef058010 [SCSI] qla2xxx: Retrieve additional HBA port statistics from recent ISPs.
HBAs supporting these additional counters include ISP24xx and
ISP25xx type boards.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 11:29:29 -06:00
Andrew Vasquez eb66dc60be [SCSI] qla2xxx: Correct NPIV support for recent ISPs.
Firmware will export to software the maximum number of vports
supported for any given firmware version and ISP type.  Use this
information rather than the current hardcoding of limitations
within the driver.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:22:45 -06:00
Andrew Vasquez 285d0321d1 [SCSI] qla2xxx: Make driver (mostly) legacy I/O port free.
Recent ISPs need only the single MMIO BAR to manipulate HW
registers.  Unfortunately, ISP21xx, ISP22xx, ISP23xx, and ISP63xx
type cards still require the I/O mapped region to manipulate the
FLASH via the two HW flash-registers (flash_address and
flash_data).

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23 15:54:28 -04:00
Andrew Vasquez f363b9434a [SCSI] qla2xxx: Use shost_priv().
Drop usage of legacy to_qla_host() macro.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:22 -04:00
Andrew Vasquez e745759a0f [SCSI] qla2xxx: Remove unused member (list) from srb_t structure.
This change reduces by as much as 16% the memory footprint for
each allocated sbr_t structure requested from the mempool.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:17 -04:00
Seokmann Ju 4d0ea24769 [SCSI] qla2xxx: Retrieve max-NPIV support capabilities from FW.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:14 -04:00
Andrew Vasquez 8a85e17152 [SCSI] qla2xxx: Set correct attribute count during FDMI RPA.
Also remove legacy '/proc' name during OS_DEVICE_NAME
registration.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:06 -04:00
Seokmann Ju 14e660e677 [SCSI] qla2xxx: Add PCI error recovery support.
Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:49:47 -04:00
Joe Carnuccio b7cc176c9e [SCSI] qla2xxx: Allow region-based flash-part accesses.
Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:49:42 -04:00
Andrew Vasquez c81d04c9e2 [SCSI] qla2xxx: Collapse and simplify ISP2XXX firmware dump routines.
Add IO-base-window accessor functions.  Merge duplicate
RISC-pause and soft-reset code segments.  Drop 'eye-watering'
__iomem casting.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:49:34 -04:00
Andrew Vasquez a3cbdfad15 [SCSI] qla2xxx: Correct 8GB iIDMA support.
Original implementation manipulated the FC_GS values for
port-speed.  Transition the codes to use the driver's own
internal representations as this makes for a reduction in
duplicate 'conversion' codes throughout the driver.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-15 13:03:20 -05:00
Seokmann Ju 281afe1947 [SCSI] qla2xxx: fix to honor ignored parameters in sysfs attributes
This is a patch to fix 'segmentation fault' issue which was initiated
by Richard Lary <rlary@us.ibm.com>.  Thanks again Richard.

- on following sysfs attritute function, changes have made so that both
  count and offset input parameters are honored by the functions.
    = qla2x00_sysfs_read_nvram()
    = qla2x00_sysfs_read_vpd()
- made changes so that NVRAM data to be cached to minimize H/W accesses
  during agent querying of the driver's.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-27 09:14:22 -04:00
Andrew Vasquez c3a2f0dfe1 [SCSI] qla2xxx: Add ISP25XX support.
Large code-reuse from ISP24xx, consolidate RISC memory
extraction routines during firmware-dump.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20 09:25:29 -05:00
Andrew Vasquez fd34f55694 [SCSI] qla2xxx: Re-factor isp_operations to static structures.
In preparation for new ISP types.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20 09:24:22 -05:00
Andrew Vasquez 5881569bb3 [SCSI] qla2xxx: Correct setting of 'current' and 'supported' speeds during FDMI registration.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20 09:23:45 -05:00
Andrew Vasquez c76f2c013f [SCSI] qla2xxx: Generalize iIDMA support.
In preparation for new ISP types.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20 09:02:04 -05:00
Andrew Vasquez e428924ccd [SCSI] qla2xxx: Generalize FW-Interface-2 support.
In preparation for new ISP types.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20 08:59:09 -05:00
Seokmann Ju 2c3dfe3f6a [SCSI] qla2xxx: add support for NPIV
Following patch adds support for NPIV (N-Port ID Virtualization) to the
qla2xxx.

- supported within switched-fabric topologies only.
- supports up to 63 virtual ports on each physical port.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14 19:08:05 -05:00
Malahal Naineni b889d531b6 [SCSI] qla2xxx: fix RSCN handling on big-endian systems
qla2xxx driver fails to handle RSCN events affecting area or domain due
to an endian issue on big endian systems.  This fixes the port_id_t
structure on big endian systems.

Signed-off-by: Malahal Naineni <malahal@us.ibm.com>
Acked-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-20 10:49:40 -05:00
James Bottomley 30716e07ef Merge branch 'linus' 2007-01-31 11:24:00 -06:00
Seokmann Ju 03c79cc56e [SCSI] qla2xxx: Remove unnecessary spinlock primitive - mbx_reg_lock.
Since, mailbox commands are executed in a synchronous
manner, there is no need to have a separate spinlock
primitive to protect data/register access shared by callers.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31 11:15:09 -06:00
Andrew Vasquez 30c4766213 [SCSI] qla2xxx: Export OptionROM boot-codes version information.
This includes BIOS, EFI, FCODE and firmware versions.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31 11:06:38 -06:00
Andrew Vasquez d88021a671 [SCSI] qla2xxx: Handle IRQ-0 assignments by the system.
No restriction should be placed on the IRQ number assigned
to a given ISP.  Original code incorrectly assumed a
non-zero IRQ number assignment by the system.  In these
circumstances the proper freeing of the IRQ (via free_irq())
would not take place.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31 11:06:12 -06:00
Andrew Vasquez a8488abefa [SCSI] qla2xxx: Add MSI-X support.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31 11:05:20 -06:00
Andrew Vasquez 4346b14942 [SCSI] qla2xxx: Detect GPSC capabilities within a fabric.
Disable subsequent GPSC queries if Fabric Management services do
not support the operation.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03 16:57:54 -06:00
Andrew Vasquez df7baa506c [SCSI] qla2xxx: Correct QUEUE_FULL handling.
- Drop queue-depths across all luns for a given fcport
  during TASK_SET_FULL statuses.
- Ramp-up I/Os after throttling.
- Consolidate completion-status handling of CS_QUEUE_FULL with
  CS_COMPLETE as ISP24xx firmware no longer reports
  CS_QUEUE_FULL.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25 15:13:08 -07:00
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Andrew Vasquez 90991c85d3 [SCSI] qla2xxx: Add support for fabric name FC transport attribute.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-03 17:28:50 -05:00
Andrew Vasquez d8b4521349 [SCSI] qla2xxx: Add iIDMA support.
iIDMA (Intelligent Interleaved Direct Memory Access) allows for
the HBA hardware to send FC frames at the rate at which they can
be received by a target device.  By taking advantage of the
higher link rate, the HBA can maximize bandwidth utilization in a
heterogeneous multi-speed SAN.

Within a fabric topology, port speed detection is done via a Name
Server command (GFPN_ID) followed by a Fabric Management command
(GPSC).  In an FCAL/N2N topology, port speed is based on the HBA
link-rate.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-03 17:28:38 -05:00
Andrew Vasquez 45ebeb5605 [SCSI] qla2xxx: Log Trace/Diagonostic asynchronous events.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 11:30:10 -05:00
James Bottomley c4e00fac42 Merge ../scsi-misc-2.6
Conflicts:

	drivers/scsi/nsp32.c
	drivers/scsi/pcmcia/nsp_cs.c

Removal of randomness flag conflicts with SA_ -> IRQF_ global
replacement.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-03 09:41:12 -05:00
Adrian Bunk 0418726bb5 typo fixes: aquire -> acquire
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-30 18:23:04 +02:00
Andrew Vasquez 88729e53a4 [SCSI] qla2xxx: Add DMI (Diagnostics Monitoring Interface) support.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 16:22:40 -05:00
Andrew Vasquez d4c760c211 [SCSI] qla2xxx: Add NVRAM 'Disable Serdes' bit support.
The host section of ISP24xx NVRAMs contain a new bit which
allows a user to selectively disable ports of an HBA.  These
ports (hosts) will not be presented to the midlayer.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 16:21:55 -05:00
Andrew Vasquez a7a167bf7e [SCSI] qla2xxx: Rework firmware-trace facilities.
- Defer firmware dump-data raw-to-textual conversion to
  user-space.
- Add module parameter (ql2xallocfwdump) to allow for per-HBA
  allocations of firmware dump memory.
- Dump request and response queue data as per firmware group
  request.
- Add extended firmware trace support for ISP24XX/ISP54XX chips.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 16:20:44 -05:00
Andrew Vasquez d4e3e04d78 [SCSI] qla2xxx: Consolidate firmware-dump handling across ISPs.
Simplify and centralise buffer allocation/deallocation, as
there's no point in having two memory request methods.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:50:11 -05:00
Andrew Vasquez cb63067a77 [SCSI] qla2xxx: Consolidate "qla2xxx" string usage to a #define.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:49:53 -05:00
Andrew Vasquez 441d107204 [SCSI] qla2xxx: Remove obsolete firmware-loader-module support.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:49:13 -05:00
Andrew Vasquez 4971cd221a [SCSI] qla2xxx: Remove unused port-type RSCN handling code.
Expandind on the previous commit:

	commit 79f89a4296
	Author: andrew.vasquez@qlogic.com <andrew.vasquez@qlogic.com>
	Date:   Fri Jan 13 17:05:58 2006 -0800

	[SCSI] qla2xxx: Disable port-type RSCN handling via driver state-machine.

and given:

- the process-context requirements of the FC transport
  rport-APIs.
- lack of port-type RSCN processing logic for ISP24xx and newer
  chips.

it's time now to remove the state-machine logic from mainline.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:43:44 -05:00
Andrew Vasquez 75bc419070 [SCSI] qla2xxx: Drop unused driver cruft.
- structure definitions.
- structure members.
- #define's.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:43:22 -05:00
Ravi Anand 45aeaf1e8e [SCSI] qla2xxx: Add support for new flash part.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:40:41 -05:00
andrew.vasquez@qlogic.com 4a59f71d7f [SCSI] qla2xxx: Further restrict ZIO mode support.
Only support ZIO mode 6 on specific ISP types.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12 09:40:13 -06:00
andrew.vasquez@qlogic.com 6f6417905c [SCSI] qla2xxx: Add VPD sysfs attribute.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12 09:39:55 -06:00
andrew.vasquez@qlogic.com 044cc6c8ec [SCSI] qla2xxx: Add ISP54xx support.
Chip is similar in form to our ISP24xx offering.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12 09:38:03 -06:00
andrew.vasquez@qlogic.com ea5b6382fd [SCSI] qla2xxx: Convert IS_QLA*() defines to bit-operations.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12 09:37:24 -06:00
Christoph Hellwig 39a112403f [SCSI] qla2xxx: use kthread_ API
Use the kthread_ API instead of opencoding lots of hairy code for kernel
thread creation and teardown.

Also switch from semaphore-based thread wakeup to wake_up_process.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-By: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-02 22:56:40 -06:00
andrew.vasquez@qlogic.com 854165f424 [SCSI] qla2xxx: Add support to retrieve/update HBA option-rom.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04 16:12:41 -06:00