Eventually this should be useful to other tools/ living utilities.
For now don't try to build any .a, just trying the minimal approach of
separating existing code into multiple .c files that can then be
included wherever they are needed, using whatever build machinery
already in place.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pfa8i5zpf4bf9rcccryi0lt3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the added variable ${KERNEL_VERSION}, it is useful to be
able to use parts of it for other variables.
For example, if you want to create a warnings file for each major
kernel version to test sub versions against you can create
your warnings file with like this:
WARNINGS_FILE = warnings-file-${KERNEL_VERSION}
But this may add 3.8.12 or something, and we want all 3.8.* to
use the same file, and 3.10.* to use another file, and so on.
With the eval command we can, by adding:
WARNINGS_FILE =~ s/(-file-\d+\.\d+).*/$1/
Which will chop off the extra characters after the 3.8.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are a couple of valid use cases for a minimal low-level bpf asm
like tool, for example, using/linking to libpcap is not an option, the
required BPF filters use Linux extensions that are not supported by
libpcap's compiler, a filter might be more complex and not cleanly
implementable with libpcap's compiler, particular filter codes should
be optimized differently than libpcap's internal BPF compiler does,
or for security audits of emitted BPF JIT code for prepared set of BPF
instructions resp. BPF JIT compiler development in general.
Then, in such cases writing such a filter in low-level syntax can be
an good alternative, for example, xt_bpf and cls_bpf users might have
requirements that could result in more complex filter code, or one that
cannot be expressed with libpcap (e.g. different return codes in
cls_bpf for flowids on various BPF code paths).
Moreover, BPF JIT implementors may wish to manually write test cases
in order to verify the resulting JIT image, and thus need low-level
access to BPF code generation as well. Therefore, complete the available
toolchain for BPF with this small bpf_asm helper tool for the tools/net/
directory. These 3 complementary minimal helper tools round up and
facilitate BPF development.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a minimal BPF debugger that "emulates" the kernel's
BPF engine (w/o extensions) and allows for single stepping (forwards
and backwards through BPF code) or running with >=1 breakpoints through
selected or all packets from a pcap file with a provided user filter
in order to facilitate verification of a BPF program. When a breakpoint
is being hit, it dumps all register contents, decoded instructions and
in case of branches both decoded branch targets as well as other useful
information.
Having this facility is in particular useful to verify BPF programs
against given test traffic *before* attaching to a live system.
With the general availability of cls_bpf, xt_bpf, socket filters,
team driver and e.g. PTP code, all BPF users, quite often a single
more complex BPF program is being used. Reasons for a more complex
BPF program are primarily to optimize execution time for making a
verdict when multiple simple BPF programs are combined into one in
order to prevent parsing same headers multiple times. In particular,
for cls_bpf that can have various return paths for encoding flowids,
and xt_bpf to come to a fw verdict this can be the case.
Therefore, as this can result in more complex and harder to debug
code, it would be very useful to have this minimal tool for testing
purposes. It can also be of help for BPF JIT developers as filters
are "test attached" to the kernel on a temporary socket thus
triggering a JIT image dump when enabled. The tool uses an interactive
libreadline shell with auto-completion and history support.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a special variable that can be used in other variables called
${KERNEL_VERSION}. This will embed the current kernel version into
the variable. For example:
WARNINGS_FILE = ${OUTPUT_DIR}/warnings-${KERNEL_VERSION}
If the current version is v3.8 then the WARNINGS_FILE will become
${OUTPUT_DIR}/warnings-v3.8
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
. Add an option in 'perf script' to print the source line number, from Adrian Hunter
. Add --header/--header-only options to 'script' and 'report', the default is not
tho show the header info, but as this has been the default for some time,
leave a single line explaining how to obtain that information, from Jiri Olsa.
. Fix symoff printing in callchains in 'perf script', from Adrian Hunter.
. Assorted mmap_pages handling fixes, from Adrian Hunter.
. Fix summary percentage when processing files in 'perf trace', fom David Ahern.
. Handle old kernels where the "raw_syscalls" tracepoints were called plan "syscalls",
in 'perf trace', from David Ahern.
. Several man pages typo fixes from Dongsheng Yang.
. Add '-v' option to 'perf kvm', from Dongsheng Yang.
. Make perf kvm diff support --guestmount, from Dongsheng Yang.
. Get rid of several die() calls in libtraceevent, from Namhyung Kim.
. Use basename() in a more robust way, to avoid problems related to different
system library implementations for that function, from Stephane Eranian.
. Remove open coded management of short_name_allocated member, from Adrian Hunter
. Several cleanups in the "dso" methods, constifying some parameters and
renaming some fields to clarify its purpose.
. Add per-feature check flags, fixing libunwind related build problems on some
architectures, from Jean Pihet.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=0wIi
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
* Add an option in 'perf script' to print the source line number, from Adrian Hunter
* Add --header/--header-only options to 'script' and 'report', the default is not
tho show the header info, but as this has been the default for some time,
leave a single line explaining how to obtain that information, from Jiri Olsa.
* Fix symoff printing in callchains in 'perf script', from Adrian Hunter.
* Assorted mmap_pages handling fixes, from Adrian Hunter.
* Fix summary percentage when processing files in 'perf trace', from David Ahern.
* Handle old kernels where the "raw_syscalls" tracepoints were called plan "syscalls",
in 'perf trace', from David Ahern.
* Several man pages typo fixes from Dongsheng Yang.
* Add '-v' option to 'perf kvm', from Dongsheng Yang.
* Make perf kvm diff support --guestmount, from Dongsheng Yang.
* Get rid of several die() calls in libtraceevent, from Namhyung Kim.
* Use basename() in a more robust way, to avoid problems related to different
system library implementations for that function, from Stephane Eranian.
* Remove open coded management of short_name_allocated member, from Adrian Hunter
* Several cleanups in the "dso" methods, constifying some parameters and
renaming some fields to clarify its purpose. (Arnaldo Carvalho de Melo.)
* Add per-feature check flags, fixing libunwind related build problems on some
architectures, from Jean Pihet.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use the per-feature check flags for the unwinding feature in order to
correctly compile the test-all, libunwind and libunwind-debug-frame
feature checks.
Tested on x86_64, ARMv7 and ARMv8 with and without LIBUNWIND_DIR set in
'make -C tools/perf'
Signed-off-by: Jean Pihet <jean.pihet@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linaro-kernel@lists.linaro.org
Cc: patches@linaro.org
Link: http://lkml.kernel.org/r/1386678244-13535-3-git-send-email-jean.pihet@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add CFLAGS and LDFLAGS for each feature to be checked. This allows to
pass flags and parameters to the feature checks compilation. Also
simplifies the feature check makefile, to come in a subsequent patch.
Signed-off-by: Jean Pihet <jean.pihet@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linaro-kernel@lists.linaro.org
Cc: patches@linaro.org
Link: http://lkml.kernel.org/r/1386678244-13535-2-git-send-email-jean.pihet@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The basename() implementation varies a lot between systems.
The Linux man page says: "basename may modify the content of the path,
so it may be desirable to pass a copy when calling the function".
On some other systems, the returned address may come from an internal
buffer which can be reused in subsequent calls, thus the results should
also be copied.
The dso__set_basename() function was not doing this causing problems
on some systems with wrong library names being shown by perf report,
such as on Android systems.
This patch fixes the problem.
The patch is relative to tip.git.
In v2, we clean up the comments based on Ingo's feedback.
Reported-by: Ben Cheng <bccheng@google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Cheng <bccheng@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131205182642.GA14614@quad
[ v3: Fixed up wrt allocated flag now being set in dso__set_short_name ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'file' is more commonly associated with a file descriptor of
some sort, rename it to 'filename' as this is the more common idiom
for a file name argument.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0ehaawv5xc83w6ag03c5hi10@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those methods are not supposed to change the data structures they
manipulate, so make that clearer by using the const qualifier in the
function signature and in some variables.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-j7oyakex7zy3r82h33rdw25x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help in debugging use after free bugs.
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3ckwsob2g1q23s77nuhexrq7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Same reason as for dso->short_name, it may point to a const string, and
in most places it is treated as const, i.e. it is just accessed for
using its contents as a key or to show it on reports.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nf7mxf33zt5qw207pbxxryot@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of expecting callers to set this member accodingly so that later
at dso destruction it can, if needed, be correctly free()d, make it a
requirement by passing it as a parameter to dso__set_long_name.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-na7t1tqim22vuqkt4zq5n4ri@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparatory patch to do with dso__set_long_name what was done
with the short name variant.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mb7eqhkyejq1qcf3p22wz2x7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of expecting callers to set this member accodingly so that later
at dso destruction it can, if needed, be correctly free()d, make it a
requirement by passing it as a parameter to dso__set_short_name.
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/52A707A2.5020802@intel.com
[ Renamed the 'allocated' parameter to clearly indicate to which variable it refers to. ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use dso__set_short_name instead, as it will release any previously,
possibly allocated, short name.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1v39elw7v6nxczpntpp7ljwr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So we now have:
dso->short_name
dso->short_name_len
dso->short_name_allocated
Ditto for the 'long variants. To more quickly grasp what they refer to.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nu228f8vlp9w0lr7c0q77dqi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the perf.data header is always displayed for stdio output,
which is no always useful.
Disabling header information by default and adding following options to
control header output:
--header - display header information
--header-only - display header information only w/o further
processing
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-0ehaawv5xc83w6ag03c5hi10@git.kernel.org
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386583370-1699-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the perf.data header is always displayed for stdio output,
which is no always useful.
Disabling header information by default and adding following options to
control header output:
--header - display header information (old default)
--header-only - display header information only w/o further
processing, forces stdio output
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386583370-1699-2-git-send-email-jolsa@redhat.com
[ Added single line explaining talking about the new --header* options,
to address David Ahern comment; better man page entry for the new options,
from Namhyung Kim ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Change the function signature to return error code and not call die()
anymore.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386567251-22751-13-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make it return error value since its only caller find_event() now can
handle allocation error properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386567251-22751-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It returns NULL when allocation fails so the users should check the
return value from now on.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386567251-22751-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In manpage of perf-kvm, --guestmount is supported by diff command, but
it does not work well.
This patch change the extend the checking in buildid-diff from
guestkallsyms or guestmodules to perf_guest. Then this checking can
cover the all cases perf kvm is used for.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/72857ed89642e0633f5e88f7e7abbc9645359e8e.1386368672.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The code in builtin-kvm.c to generate filename for perf-kvm is useful to
other command such as builtin-diff.
This patch move the related code form builtin-kvm.c to util/util.c and
wrap them in a function named get_filename_for_perf_kvm.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/5e09a5c47e8a495e888cbdc65a6fafb2c950f529.1386368672.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we use perf kvm record-report, there is a bug in report subcommand.
Example:
# perf kvm stat record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.678 MB perf.data.guest (~29641 samples) ]
# perf kvm stat report
failed to open perf.data: No such file or directory (try 'perf record' first)
Initializing perf session failed
This bug was introduced by f5fc14124.
+ struct perf_data_file file = {
+ .path = input_name,
+ .mode = PERF_DATA_MODE_READ,
+ };
kvm->tool = eops;
- kvm->session = perf_session__new(kvm->file_name, O_RDONLY, 0, false,
- &kvm->tool);
+ kvm->session = perf_session__new(&file, false, &kvm->tool);
It changed the path from kvm->file_name to input_name, this patch change the path back to
'kvm->file_name', then it works well.
Verification:
# perf kvm stat record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.807 MB perf.data.guest (~35264 samples) ]
# perf kvm stat report
Analyze events for all VCPUs:
VM-EXIT Samples Samples% Time% Min Time Max Time Avg time
EPT_VIOLATION 200 32.79% 1.25% 0us 12064us 62.35us ( +- 96.74% )
EPT_MISCONFIG 134 21.97% 0.21% 0us 35us 15.25us ( +- 4.14% )
EXCEPTION_NMI 96 15.74% 0.02% 0us 11us 1.95us ( +- 9.81% )
APIC_ACCESS 79 12.95% 0.02% 0us 13us 2.94us ( +- 11.20% )
HLT 65 10.66% 98.47% 0us 16706us 15084.86us ( +- 1.89% )
IO_INSTRUCTION 27 4.43% 0.02% 0us 29us 6.42us ( +- 15.53% )
EXTERNAL_INTERRUPT 5 0.82% 0.01% 0us 77us 23.65us ( +- 57.90% )
TPR_BELOW_THRESHOLD 4 0.66% 0.00% 0us 1us 1.22us ( +- 4.36% )
Total Samples:610, Total events handled time:995745.54us.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/1386632823-17539-1-git-send-email-yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As there is no -v option for perf kvm, the all debug message for perf
kvm will nerver be printed out to user.
Example:
# perf kvm --guestmount /tmp/guestmount/ record -a
Not enough memory for reading perf file header
It is confusing message for newbies such as me. With this patch applied,
we can use -v option to get the detail.
Example:
# perf kvm --guestmount /tmp/guestmount/ record -a -v
Can't access file /tmp/guestmount//15069/proc/kallsyms
Not enough memory for reading perf file header
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1386609311-23889-1-git-send-email-yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'next_pow2()' only works for 'unsigned int' but the argument is
'unsigned long'. Checking for values less than (1 << 31) ensures that
'next_pow2()' is not passed a value out of range but lets anything else
go through unvalidated.
As a result mmap_pages of zero is used e.g.
perf record -v -m2147483649 uname
mmap size 0B
failed to mmap with 22 (Invalid argument)
Fixed:
perf record -m2147483649 uname
rounding mmap pages size to 17592186044416 bytes (4294967296 pages)
Invalid argument for --mmap_pages/-m
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386595120-22978-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'SIZE_MAX / page_size' is an upper limit for the maximum number of mmap
pages, not a lower limit. Change the condition accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386595120-22978-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'mmap_pages' is 'unsigned int' not 'int' e.g.
perf record -m2147483648 uname
Permission error mapping pages.
Consider increasing /proc/sys/kernel/perf_event_mlock_kb,
or try again with a smaller value of -m/--mmap_pages.
(current value: -2147483648)
Fixed:
perf record -m2147483648 uname
Permission error mapping pages.
Consider increasing /proc/sys/kernel/perf_event_mlock_kb,
or try again with a smaller value of -m/--mmap_pages.
(current value: 2147483648)
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386595120-22978-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add field 'srcline' that displays the source file name and line number
associated with the sample ip. The information displayed is the same as
from addr2line.
$ perf script -f comm,tid,pid,time,ip,sym,dso,symoff,srcline
grep 10701/10701 2497321.421013: ffffffff81043ffa native_write_msr_safe+0xa ([kernel.kallsyms])
/usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/arch/x86/include/asm/msr.h:95
grep 10701/10701 2497321.421984: ffffffff8165b6b3 _raw_spin_lock+0x13 ([kernel.kallsyms])
/usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/arch/x86/include/asm/spinlock.h:54
grep 10701/10701 2497321.421990: ffffffff810b64b3 tick_sched_timer+0x53 ([kernel.kallsyms])
/usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/kernel/time/tick-sched.c:840
grep 10701/10701 2497321.421992: ffffffff8106f63f run_timer_softirq+0x2f ([kernel.kallsyms])
/usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/kernel/timer.c:1372
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386315778-11633-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The address being used to calculate the offset was the memory address
but the address needed is the address mapped to the dso. i.e. the 'addr'
member of 'struct addr_location'
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386315778-11633-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With very old libc headers the inclusion of sys/types.h causes conflicts
with linux/types.h. Since the latter is not required anyway, remove it
from the source files. If any of the headers really needs linux/types.h
it has to include it itself.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are a bunch of USB fixes for 3.13-rc3.
Nothing major, but we seem to have an argument about a XHCI fix, so I'm not
including a revert that Sarah requested, because that breaks a USB network
driver, and I can't revert the USB network driver fix without reintroducing
other bugs that it fixed. So as it is, everything should now be
working. Worse case, I can revert the XHCI fix before 3.13-final is
out, but it seems to work well here with my testing, so all should be
good.
Other than that, some driver updates based on reports.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlKiEuYACgkQMUfUDdst+ymE8ACgnDT8s4FtrYfoyOo5K4TVTRaZ
S2wAn3+Xa2TX1Sym+ltJry7N1jRnY2Qy
=JUaB
-----END PGP SIGNATURE-----
Merge tag 'usb-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a bunch of USB fixes for 3.13-rc3.
Nothing major, but we seem to have an argument about a XHCI fix, so
I'm not including a revert that Sarah requested, because that breaks a
USB network driver, and I can't revert the USB network driver fix
without reintroducing other bugs that it fixed. So as it is,
everything should now be working. Worse case, I can revert the XHCI
fix before 3.13-final is out, but it seems to work well here with my
testing, so all should be good.
Other than that, some driver updates based on reports"
* tag 'usb-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
usb: hub: Use correct reset for wedged USB3 devices that are NOTATTACHED
usb: ohci-pxa27x: include linux/dma-mapping.h
USB: cdc-acm: Added support for the Lenovo RD02-D400 USB Modem
usb: tools: fix a regression issue that gcc can't link to pthread
USB: switch maintainership of chipidea to Peter
USB: pl2303: fixed handling of CS5 setting
USB: ftdi_sio: fixed handling of unsupported CSIZE setting
USB: mos7840: correct handling of CS5 setting
USB: spcp8x5: correct handling of CS5 setting
usb: wusbcore: fix deadlock in wusbhc_gtk_rekey
usb: wusbcore: do device lookup while holding the hc mutex
usb: wusbcore: send keepalives to unauthenticated devices
USB: option: support new huawei devices
USB: serial: option: blacklist interface 1 for Huawei E173s-6
usb: xhci: Link TRB must not occur within a USB payload burst
usb: gadget: f_mass_storage: call try_to_freeze only when its safe
usb: gadget: tcm_usb_gadget: mark bot_cleanup_old_alt static
usb: gadget: ffs: fix sparse warning
usb: gadget: zero: module parameters can be static
usb: gadget: storage: fix sparse warning
...
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and
<acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h>
inclusions and remove some inclusions of those files that aren't
necessary.
First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>
should not be included directly from any files that are built for
CONFIG_ACPI unset, because that generally leads to build warnings about
undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set,
<linux/acpi.h> includes those files and for CONFIG_ACPI unset it
provides stub ACPI symbols to be used in that case.
Second, there are ordering dependencies between those files that always
have to be met. Namely, it is required that <acpi/acpi_bus.h> be included
prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the
latter depends on are always there. And <acpi/acpi.h> which provides
basic ACPICA type declarations should always be included prior to any other
ACPI headers in CONFIG_ACPI builds. That also is taken care of including
<linux/acpi.h> as appropriate.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff)
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When Jiri Olsa was writing a function callback for
scsi_trace_parse_cdb(), he thought that the traceevent library had a
bug in it because he was getting this error:
Error: expected ')' but read ','
Error: expected ')' but read ','
Error: expected ')' but read ','
Error: expected ')' but read ','
But in truth, he didn't have the write number of arguments for the
function callback, and the error was the library detecting the
discrepancy. A better error message would have prevented the confusion:
Error: function 'scsi_trace_parse_cdb()' only expects 2 arguments but event scsi_dispatch_cmd_timeout has more
Error: function 'scsi_trace_parse_cdb()' only expects 2 arguments but event scsi_dispatch_cmd_start has more
Error: function 'scsi_trace_parse_cdb()' only expects 2 arguments but event scsi_dispatch_cmd_error has more
Error: function 'scsi_trace_parse_cdb()' only expects 2 arguments but event scsi_dispatch_cmd_done has more
Or
Error: function 'scsi_trace_parse_cdb()' expects 4 arguments but event scsi_dispatch_cmd_timeout only uses 3
Error: function 'scsi_trace_parse_cdb()' expects 4 arguments but event scsi_dispatch_cmd_start only uses 3
Error: function 'scsi_trace_parse_cdb()' expects 4 arguments but event scsi_dispatch_cmd_error only uses 3
Error: function 'scsi_trace_parse_cdb()' expects 4 arguments but event scsi_dispatch_cmd_done only uses 3
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-a4c34w62vl0diitvxb7bt3er@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Getting a divide by 0 when events are processed from a file:
perf trace -i perf.data -s
...
dnsmasq (1684), 10 events, inf%, 0.000 msec
The problem is that the event count is not incremented as events are
processed. With this patch:
perf trace -i perf.data -s
...
dnsmasq (1684), 10 events, 8.9%, 0.000 msec
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1386211302-31303-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Older kernels (e.g., RHEL6) do system call tracing via
syscalls:sys_{enter,exit} rather than raw_syscalls. Update perf-trace to
detect lack of raw_syscalls support and try syscalls.
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1386211302-31303-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The traceevents-plugins install targets needs a proper dependency,
otherwise it might be executed prematurely and in parallel to an
actual build.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/n/tip-rvlbzena4ovzgqiPm6teBofz@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reproduce:
ray@hr-bak:~/usb$ make -C tools/usb/
make: Entering directory `/home/ray/usb/tools/usb'
gcc -Wall -Wextra -g -lpthread -I../include -o testusb testusb.c
/tmp/cc0EMxfy.o: In function `main':
/home/ray/usb/tools/usb/testusb.c:508: undefined reference to `pthread_create'
/home/ray/usb/tools/usb/testusb.c:531: undefined reference to `pthread_join'
collect2: error: ld returned 1 exit status
make: *** [testusb] Error 1
make: Leaving directory `/home/ray/usb/tools/usb'
Comments:
In the latest version (4.7.3) of gcc compiler, it requres that
libraries must follow the object or source files like below:
"gcc hello.c -lpthread" instead of "gcc -lpthread hello.c"
And it isn't encountered at gcc version 4.7.2.
So this patch fix to move the pthread option after testusb.c.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing malloc_or_die calls from plugin_function.c, replacing them and
factoring the code with standard realloc and error path.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-27-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Several cleanups suggested by Namhyung:
* Remove index field from struct func_stack as it's not needed.
* Rename get_index into add_and_get_index.
* Use '%*X' format string capability instead of the loop
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-26-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The pevent_print_func_field function encompasses all the functionality
used in the hrtimer_start handler. Change the handler to use this
function.
This also unifies the function field output with the
hrtimer_expire_entry handler.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-25-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need for following functions to be global:
process_jbd2_dev_to_name
process_jiffies_to_msecs
Make them static.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-24-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing malloc_or_die calls from event-plugin.c,
replacing them with standard malloc and error path.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-23-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Backporting mac80211 plugin.
Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This plugin adds changed field resolving for
mac80211:drv_bss_info_changed tracepoint event.
The diff of 'perf script' output generated by old and new code:
(data was generated by 'perf record -e 'mac80211:drv_bss_info_changed' -a')
--- script.mac80211.old
+++ script.mac80211.new
- ifconfig 3711 [000] 1290.446492: mac80211:drv_bss_info_changed: phy0 vif:wlan0(2) changed:0x309f
+ ifconfig 3711 [000] 1290.446492: mac80211:drv_bss_info_changed: phy0 vif:wlan0(2)
+ assoc:0 aid:2 cts:0 shortpre:0 shortslot:0 dtimper:1
+ bcnint:102 assoc_cap:0x431 basic_rates:0xf enable_beacon:0
+ ht_operation_mode:0
Omitting the mac80211:drv_config tracepoint handling because the kernel
tracepoint changed its prototype and the plugin handler is no longer
working.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-17-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Backporting hrtimer plugin.
Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This plugin adds function field resolving for following tracepoint
events:
timer:hrtimer_expire_entry
timer:hrtimer_start
The diff of 'perf script' output generated by old and new code: (data
was generated by 'perf record -e 'timer:hrtimer*' -a')
--- script.hrtimer.old
+++ script.hrtimer.new
- swapper 0 [000] 27405.519092: timer:hrtimer_start: [FAILED TO PARSE] hrtimer=0xffff88021e20e800 function=0xffffffff810c0e10 expires=27398383000000 softexpires=27398383000000
+ swapper 0 [000] 27405.519103: timer:hrtimer_start: hrtimer=0xffff88021e20e800 function=tick_sched_timer expires=27398383000000 softexpires=27398383000000
- swapper 0 [001] 27405.519544: timer:hrtimer_expire_entry: [FAILED TO PARSE] hrtimer=0xffff880211334058 now=27398294182491 function=0xffffffff81086f20
+ swapper 0 [001] 27405.519544: timer:hrtimer_expire_entry: hrtimer=0xffff880211334058 now=27398294182491 function=posix_timer_fn/0x0
Check the 'function' field is translated into the function name.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-14-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The traceevent lib uses pr_stat to display all standard info. It's
defined as __weak. Overloading it with perf version plugged into perf
output system logic.
Displaying the pr_stat stuff under '-v' option.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-12-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to get the proper plugins processing we need to use full
trace-event interface when creating tracepoint events. So far we were
using shortcut to get the parsed format.
Moving current 'event_format__new' function into trace-event object as
'trace_event__tp_format'.
This function uses properly initialized global trace-event object,
ensuring proper plugins processing.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-11-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add trace-event object to keep together 'struct pevent' object with its
loaded plugins with following interface:
int trace_event__init(struct trace_event *t);
- Initalizes 'struct pevent' object and loads plugins for it
void trace_event__cleanup(struct trace_event *t);
- Cleanups both 'struct pevent' and plugins
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-10-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding filename__read_str util function to read
text file and return it in the char array.
The interface is:
int filename__read_str(const char *filename, char **buf, size_t *sizep)
Returns 0/-1 if the read suceeded/fail respectively.
buf - place to store the data pointer
size - place to store data size
v2 change:
- better error handling suggested by Namhyung Kim.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-9-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing the 'to ...' part out of the install message, because it does
not fit to the rest of the build messages we use.
Before:
INSTALL plugin_hrtimer.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_jbd2.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_kmem.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_kvm.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_mac80211.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_sched_switch.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_function.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_xen.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_scsi.so to /home/jolsa/libexec/perf-core/traceevent/plugins
Now:
INSTALL plugin_jbd2.so
INSTALL plugin_hrtimer.so
INSTALL plugin_kmem.so
INSTALL plugin_kvm.so
INSTALL plugin_mac80211.so
INSTALL plugin_sched_switch.so
INSTALL plugin_function.so
INSTALL plugin_xen.so
INSTALL plugin_scsi.so
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-7-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changing the pevent_parse_format interface to include the pevent handle.
The goal is to always use pevent object when dealing with traceevent
library. The reason is that we might need additional processing (like
plugins), which is not possible otherwise.
Patches follow to make this happen completely.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-6-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding traceevent_host_bigendian function to get host endianity. It's
used in following patches.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-5-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Backporting missing pieces of plugin building infrastructure:
- Adding Makefile 'plugins' target to build all
defined plugins
- Adding Makefile 'install_plugins' target as 'install_lib'
target dependency
- Link plugin objects with shared object building
Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
Plugins are by default installed into following locations:
'$(HOME)/.traceevent/plugins'
- If we are installing under $(HOME)
'$(prefix)/lib/traceevent/plugins'
- Otherwise
This path is propagated to the plugin object as a plugins search path.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Backporting plugin support for traceevent lib.
Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
It's now possible to use following interface to load plugins
(shared objects) to enhance pevent object functionality.
The plugin interface/hooks are as follows:
(taken from event-parse.h comments)
- 'pevent_plugin_loader' (required)
The function name to initialized the plugin.
int pevent_plugin_loader(struct pevent *pevent)
- 'pevent_plugin_unloader' (optional)
The function called just before unloading
int pevent_plugin_unloader(void)
- 'pevent_plugin_options' (optional)
Plugin options that can be set before loading
struct plugin_option pevent_plugin_options[] = {
{
.name = "option-name",
.plugin_alias = "overide-file-name", (optional)
.description = "description of option to show users",
},
{
.name = NULL,
},
};
Array must end with .name = NULL;
The plugin_alias (below) can be used to give a shorter
name to access the variable. Useful if a plugin handles
more than one event.
NOTE options support is not backported yet.
- 'pevent_plugin_alias' (optional)
The name to use for finding options (uses filename if not defined)
New traceevent functions are added to search and load
available plugins:
struct plugin_list*
traceevent_load_plugins(struct pevent *pevent)
- loads plusing for 'struct pevent' object and returns
loaded plugins list
void traceevent_unload_plugins(struct plugin_list *plugin_list);
- unload plugin list
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-3-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_event__preprocess_sample() function is called in
process_sample_event(). Instead of calling it again in
perf_evsel__print_ip(), pass through the resultant addr_location.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/529F3944.9050007@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When built without libelf, perf tools was failing to initialize a file
descriptor, but nevertheless closing it. That sometimes resulted in the
output being truncated because the stdout file descriptor got closed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386166981-30197-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As we have changed the default behavior of 'perf kvm' to --guest
enabled, the parts of the man page that covers the 'record' subcommand
are outdated.
This patch updates it to show the correct output with
--host/--guest/neither/both of them.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/3a3a9c1e05acb5a274d1d8369db5a4c6467d6276.1386197481.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As option --host and --guest request no input for it, there should not
be a '=' after them in the man page sources.
And --output expects a filename as the input, so there should be a '='
after it.
This patch removes the needless '=' after --guest and --host, and adds a
'=' after --output in perf-kvm.txt.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/6124d9eb10a3f1f6b399d1db660110bc7a60fd6b.1386197481.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As the buildid is read from /sys/kernel/notes, then if we use perf kvm
buildid-list with a perf data file captured by perf kvm record with
--guestkallsyms and --guestmodules, there is no result in output.
This patch add a explanation about it and add a limit of using perf kvm
buildid-list.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/d605a805486340b53bc261aa64d7632ad0a8cf53.1386197481.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check for cpu_map__dummy_new() or cpu_map__new() to be called in
perf_evlist__create_maps() is more complicated.
This patch moves the checking work into target.h, combining two
conditions and making perf_evlist__create_maps() more readable.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/b8c41f1fd2c4f0df71eb7b19aea74fb64d46cdda.1386197481.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In machine__get_kernel_start_addr, the code, which is using
machine->root_dir to build filename, works for both host and guests
initialized from guestmount, as root_dir is set to "" for the host
machine in the machine__init() function.
So this patch remove the branch for machine__is_host.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/0a81645dd0b384a12cb4f962cf193ef8c3ce2010.1386197481.git.yangds.fnst@cn.fujitsu.com
[ Clarified changeset mentioning root_dir setup in machine__init() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We use -fstack-protector-all option to enable stack protecting for all
available functions. There's no reason for enabling -Wstack-protector to
get warning for unprotected functions.
Removing stackprotector feature check which was used to enable the
-Wstack-protector option.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Looking up an ip's source file name and line number does not succeed
always. Current logic disables the lookup for a dso entirely on any
failure. Change it so that disabling never happens if there has ever
been a successful lookup for that dso but disable if the first 123
lookups fail.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386055390-13757-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, lookup of an ip's source file name and line number is done
using the dso file name.
Instead retain the file name used to lookup the dso's symbols and use
that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386055390-13757-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Closng and re-opening for every lookup when using libbfd to lookup
source file name and line number is very very slow. Instead keep the
reference on struct dso.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386055390-13757-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The asprintf library function is equivalent to malloc plus snprintf so
use it because it is simpler.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386055390-13757-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All of the rcutorture scripts has the usual GPL header, which contains
a long-obsolete postal address for FSF. To avoid the need to track the
FSF office's movements, this commit substitutes the URL where GPL may
be found.
Reported-by: Greg KH <gregkh@linuxfoundation.org>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The output of the rcutorture scripts often requires interpretation, so
this commit simplifies this interpretation by tagging messages as
BUGs (colored red) or WARNINGs (colored yellow).
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Repeatedly running a given test, for example, by repeating the name
as in "--configs "TREE08 TREE08 TREE08" records the results only of
the last run of this test. This is because the earlier results are
overwritten by the later results.
This commit therefore checks for earlier results, using numbered
file extensions to distinguish multiple runs. The earlier example
would therefore create directories TREE01, TREE01.2, and TREE01.3.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
The commit causes kvm.sh to invoke kvm-recheck.sh at the end of each
run, and causes kvm-recheck.sh to print only the name of the test, not
the full path to the corresponding Kconfig file.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
The TREE08 Kconfig fragment does not enable tracing, which is appropriate
for its test case. However, this can be inconvenient in cases where
TREE08 locates RCU bugs. This commit therefore adds a TREE08-T that
differs from TREE08 only in enabling CONFIG_RCU_TRACE.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
This commit adds the --kmake-arg to kvm.sh, which allows passing in
things like "V=1" to see the build commands, as well as enabling the
CROSS_COMPILE= make macro used for cross-building.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
This commit adds the --no-initrd argument to kvm.sh, which permits
initrd to be contained in a root partition specified by the --bootargs
argument. Without --no-initrd, the kernel build expects an initrd
directory in the same rcutorture directory that contains bin and configs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
This commits adds the --qemu-args argument to kvm.sh that is required
to pass boot devices down through to qemu.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
This commit allows easy specification of trace_event lists, among other
things.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
This commit adds --buildonly, which does the builds specified by the
--configs argument, but does not boot or test the resulting kernels.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Don't grab the configuration fragment from the configs directory because
it might well have been changed since the test was run. Instead, use
the ConfigFragment file that was placed in the results directory.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
As it stands, the default kernel boot parameters generated from
the Kconfig fragment will override any supplied with the .boot
file that can optionally accompany a Kconfig fragment. Rearrange
ordering to permit the specific .boot arguments to override those
generated by analyzing the Kconfig fragment.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
This commit expands the checks for what architecture is running to generate
additional qemu-system- commands, then uses the resulting qemu-system-
command name to choose different qemu arguments as needed for different
architectures.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
The --rcu-kvm argument was intended to allow the scripts to live in
an alternate location. Unfortunately, this prevents the kvm.sh script
from using common functions until after it finished parsing arguments,
because it doesn't know where to find them until then. However, "cp -a"
and "ln -s" work pretty well, so lack of an --rcu-kvm argument can be
easily worked around.
This commit therefore removes this argument.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
The qemu -name argument doesn't seem to be useful in this environment,
so this commit removes it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
The task of working out which flavor of qemu to use gets more complex
as more types of CPUs are supported. Adding Power makes three in addition
to 32-bit and 64-bit x86, so it is time to pull this out into a function.
This commit therefore creates an identify_qemu function and also adds
a --qemu-cmd command-line argument for the inevitable case where the
identify_qemu cannot figure it out.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
The commit uses configcheck.sh from within configinit.sh, replacing the
imperfect inline expansion that was there before.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
This commit drops no-longer-needed diagnostics from the output. Some of
them are retained in logfiles, in case they are ever needed.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
The TINY_RCU test cases were first put in place many years ago, and have
been incrementally modified rather than being reworked. This commit
therefore completes a long-overdue reworking of the TINY_RCU test cases.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
The TREE_RCU test cases were first put in place many years ago, and have
been incrementally modified rather than being reworked. This commit
therefore completes a long-overdue reworking of the TREE_RCU test cases.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Use .boot facility to ease inclusion of SRCU into automated testing.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
The v3.12 version of the kernel added the CONFIG_NO_HZ_FULL_SYSIDLE
Kconfig parameter, so this commit adds a version transition at that
point.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Some Kconfig fragments require rcutorture module parameters to
do optimal testing, for example, a configuration for SRCU would
need rcutorture.torture_type=srcu. This commit therefore adds a
per-Kconfig-fragment boot-parameter capability.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Different Kconfig parameters apply to different kernel versions, as
do different rcutorture module parameters. This commit allows the
rcutorture test scripts to adjust for different kernel versions.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Allow datestamp to be specified to allow tests to be broken up and run
in parallel.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
This commit adds the test framework that I used to test RCU under KVM.
This consists of a group of scripts and Kconfig fragments.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
The sample.conf file needs to document all available options.
With the new CLOSE_CONSOE_SIGNAL option, it too needs to be
document.
Cc: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently ktest sends SIGINT to terminate the console.
However, there are consoles which do not exit by this signal, for example,
in my case, "virsh console <guest OS>". In such case, ktest is blocked in
close_console(). It prevents this automate test.
This patch adds new option CLOSE_CONSOLE_SIGNAL which mean the
signal to terminate the console. Since its default value is "INT",
the original behavior isn't changed.
Link: http://lkml.kernel.org/r/87zjol8pl5.wl%satoru.takeuchi@gmail.com
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently trace command supports '-m' option, but does not honours its
value and keeps the default.
Changing the perf_evlist__mmap function call to use the '-m' configured
value.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1385657842-8914-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Ingo Molnar:
"Misc kernel and tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools lib traceevent: Fix conversion of pointer to integer of different size
perf/trace: Properly use u64 to hold event_id
perf: Remove fragile swevent hlist optimization
ftrace, perf: Avoid infinite event generation loop
tools lib traceevent: Fix use of multiple options in processing field
perf header: Fix possible memory leaks in process_group_desc()
perf header: Fix bogus group name
perf tools: Tag thread comm as overriden
The package required for numa is named numactl-devel in Fedora or RHEL,
and libnuma-devel in OpenSuSE, and libnuma-dev in Ubuntu.
This patch corrects the package name in warning message in
feature-libnuma checking.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Acked-by: Peter Hurley <peter@hurleysoftware.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Link: http://lkml.kernel.org/r/1385998008-6851-1-git-send-email-yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing another global variable.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-14rpuci11l2s0o01yta87kxe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing another global variable.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2akef3p9caau56itf5mugd2b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing another global variable.
This one tho would be better done by using the machine infrastructure,
searching for the 'struct thread' with a pid, then using thread->priv,
etc.
TODO list material for now.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-yyfpudgjvr6mev4bue9u72a2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid having all those global variables and to use the interface to
event processing that is based on passing a 'perf_tool' struct that
should be embedded in a per tool specific struct passed to all the
sample processing callbacks.
There are some more globals to move, next patches will do it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0iah65pq796ezbk5u1lzwy1k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding perf_data_file__write interface to centralize output to files.
The function prototype is:
ssize_t perf_data_file__write(struct perf_data_file *file,
void *buf, size_t size);
Returns number of bytes written or -1 in case of error.
NOTE: Also indenting 'struct perf_data_file' members, no functional
change done.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1385634619-8129-6-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding 'writen' function as a synchronous wrapper for write syscall with
following prototype:
ssize_t writen(int fd, void *buf, size_t n)
Returns the number of bytes written on success or -1 in case of err.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Requested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1385634619-8129-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Added a 'left' variable to make the flow clearer, and added a debug
check for the return value - returning 'n' is more obvious.
Added small comment for readn.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Original-patch-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1385634619-8129-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changing readn function return type to ssize_t because read returns
ssize_t not int.
Changing callers holding variable types as well.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1385634619-8129-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Unifying current 2 data output functions do_write_output and
write_output into single one perf_record__write.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1385634619-8129-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Once the tags/TAGS file is generated it's never rebuilt until it's
removed by hand.
The reason is that the Makefile does not treat tags/TAGS as targets but
as files and thus won't rebuilt them once they are in place.
Adding PHONY tags/TAGS targets into Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131126125412.GJ1267@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since b000c8065a "tracing: Remove the extra 4 bytes of padding in
events" removed padding bytes, perf timechart got out of sync with the
kernel's trace_entry structure.
Convert perf timechart to use dynamic fields offsets (via
perf_evsel__intval) not relying on a hardcoded copy of fields layout
from the kernel.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Chia-I Wu <olvaffe@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20131127104459.GB3309@stfomichev-desktop
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The logic was not looking in the buildid cache for kcore if the host
kernel buildid did not match the recorded kernel buildid.
This affects the non-live case i.e. the kernel has changed and we are
looking at a special copy of kcore that we placed in the buildid cache
(using "perf buildid-cache -v -k /proc/kcore") when the data was
recorded.
After this fix kernel symbols get resolved/annotated correctly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1385471964-4037-1-git-send-email-adrian.hunter@intel.com
[ Added further explanation extracted from conversation between Ingo & Adrian on lkml ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The intent of perf-script is to dump the events and information in the
file. H/W, S/W and raw events all dump callchains if they are present;
might as well make that the default for tracepoints too.
v2: Only add options for sym, dso and ip if callchains are present
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1384920457-5986-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allows list of idle symbols to be leveraged by other commands, such as
the upcoming timehist command.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1384806771-2945-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allows a command to have a symbol_filter controlled by the user to skip
certain functions in a backtrace. One example is to allow the user to
reduce repeating patterns like:
do_select core_sys_select sys_select
to just sys_select when dumping callchains, consuming less real estate
on the screen while still conveying the essential message - the process
is in a select call.
This option is leveraged by the upcoming timehist command.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1384806771-2945-2-git-send-email-dsahern@gmail.com
[ Checked if al.sym is NULL before touching al.sym->ignored, as noted by Adrian Hunter ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add -g flag to `perf timechart record` which saves callchain info in the
perf.data.
When generating SVG, add backtrace information to the figure details, so
now it's possible to see which code path woke up the task and why some
task went to sleep.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383323151-19810-8-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we don't want either power or task events we may use -T or -P with
the `perf timechart record` command to filter out events while recording
to keep perf.data small.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383323151-19810-7-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add titles to figures so we can run SVG interactively in Firefox and
check event details in the tooltips.
This also aids exploring SVG with Inkscape because when user clicks on
one part of logical figure, all parts are selected.
It's also possible to read titles with Inkscape in the object details.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383323151-19810-6-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make SVG smaller and faster to browse add possibility to
switch off power related information with -T switch.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383323151-19810-5-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Don't use special flag to indicate power-only mode, just set proc_num to
0.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383323151-19810-4-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add -n option to specify min. number of tasks to print.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383323151-19810-3-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Always try to print at least 15 tasks no matter how long they run.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383323151-19810-2-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The change to per-cpu mmaps causes the -p, -t and -u options now to have
inheritance enabled by default. Change that back to no inheritance but
for the -t option only.
Requested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1384768557-23331-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
OPT_BOOLEAN_SET records whether a boolean option was set by the user.
That information can be used to change the default value for the option
after the options have been parsed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1384768557-23331-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Long options can be negated by prefixing them with 'no-'. However
options that already start with 'no-', such as '--no-inherit' result in
ugly double 'no's.
Avoid that by accepting that the removal of 'no-' also negates the long
option.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1384768557-23331-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This affects the -p, -t and -u options that previously defaulted to
per-thread mmaps.
Consequently add an option to select per-thread mmaps to support the old
behaviour.
Note that per-thread can be used with a workload-only (i.e. none of -p,
-t, -u, -a or -C is selected) to get a per-thread mmap with no
inheritance.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/5286271D.3020808@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The print_sample_start() will be reused by other printing routine for
internal events like COMM, FORK and EXIT from next patch. And because
they're not tied to a specific event, move the evname print code to its
caller.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384752894-10974-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
__perfcomp(), __perfcomp_colon(), and _perf() have to be overridden.
Inspired by the way the git.git completion system is structured.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1384704807-15779-5-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In our sole callsite, __ltrim_colon_completions is called after
__perfcomp, to modify the COMPREPLY set by the invocation.
This is problematic, because in the zsh equivalent (using compset/
compadd), we'll have to generate completions in one-shot.
So factor out this entire callsite into a special override'able
__perfcomp_colon function; we will override it when introducing zsh
support.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1384704807-15779-4-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
compgen is a bash-builtin; factor out the invocations into a separate
function to give us a chance to override it with a zsh equivalent in
future patches.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1384704807-15779-3-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Define the variables cur, words, cword, and prev outside the main
completion function so that we have a chance to override it when we
introduce zsh support.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1384704807-15779-2-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In most commands -g is used for callchains. Make perf-top follow suit.
Move group to just --group with no short cut making it similar to
perf-record.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1384487490-6865-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thread summary line coloring looks ugly. It doesn't add much value so
remove coloring completely.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1384447410-1771-1-git-send-email-penberg@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa reported that his plugin for scsi was chopping off part of the
output. Investigating this, I found that Jiri used the same functions as
what is in the kernel, which adds the following:
trace_seq_putc(p, 0);
This adds a '\0' to the output string. The reason this works in the
kernel is that the "p" that is passed to the function helper is a
temporary trace_seq. But in the libtraceevent library, it's the pointer
to the trace_seq used to output. By adding the '\0', it truncates the
line and nothing added after that will be printed.
We can solve this in two ways. One is to have the helper functions for
the library not add the unnecessary '\0'. The other is to change the
library to also use a helper trace_seq structure that gets copied to the
main trace_seq just like the kernel does.
The latter allows the helper functions in the plugins to be the same as
the kernel, which is the better solution.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131119182937.401668e3@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a simple wrapper to make using liblockdep on existing
applications much easier.
After running 'make && make install', it becomes quite simple to
test things with liblockdep. For example, to try it on perf:
lockdep perf
No other integration required.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/1371163284-6346-9-git-send-email-sasha.levin@oracle.com
[ Changed it to load ./liblockdep.so, so it can be tested in situ. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This allows lockdep to be used without being compiled in the
original program.
Usage is quite simple:
LD_PRELOAD=/path/to/liblockdep.so /path/to/my/program
And magically, you'll have lockdep checking in your program!
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/1371163284-6346-8-git-send-email-sasha.levin@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
These headers provide the same API as their pthread mutex
counterparts.
The design here is to allow to easily switch to liblockdep lock
validation just by adding a "liblockdep_" to pthread_mutex_*()
calls, which means that it's easy to integrate liblockdep into
existing codebases.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/1371163284-6346-4-git-send-email-sasha.levin@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
kernel/locking/lockdep.c deals with validating locking scenarios for
various architectures supported by the kernel. There isn't
anything kernel specific going on in lockdep, and when we
compare userspace to other architectures that don't have to deal
with irqs such as s390, they become all too similar.
We wrap kernel/locking/lockdep.c and include/linux/lockdep.h with
several headers which allow us to build and use lockdep from
userspace. We don't touch the kernel code itself which means
that any work done on lockdep in the kernel will automatically
benefit userspace lockdep as well!
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/1371163284-6346-3-git-send-email-sasha.levin@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds perf stat support for handling event units and
scales as exported by the kernel.
The kernel can export PMU events actual unit and scaling factor
via sysfs:
$ ls -1 /sys/devices/power/events/energy-*
/sys/devices/power/events/energy-cores
/sys/devices/power/events/energy-cores.scale
/sys/devices/power/events/energy-cores.unit
/sys/devices/power/events/energy-pkg
/sys/devices/power/events/energy-pkg.scale
/sys/devices/power/events/energy-pkg.unit
$ cat /sys/devices/power/events/energy-cores.scale
2.3283064365386962890625e-10
$ cat cat /sys/devices/power/events/energy-cores.unit
Joules
This patch modifies the pmu event alias code to check
for the presence of the .unit and .scale files to load
the corresponding values. They are then used by perf stat
transparently:
# perf stat -a -e power/energy-pkg/,power/energy-cores/,cycles -I 1000 sleep 1000
# time counts unit events
1.000214717 3.07 Joules power/energy-pkg/ [100.00%]
1.000214717 0.53 Joules power/energy-cores/
1.000214717 12965028 cycles [100.00%]
2.000749289 3.01 Joules power/energy-pkg/
2.000749289 0.52 Joules power/energy-cores/
2.000749289 15817043 cycles
When the event does not have an explicit unit exported by
the kernel, nothing is printed. In csv output mode, there
will be an empty field.
Special thanks to Jiri for providing the supporting code
in the parser to trigger reading of the scale and unit files.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: zheng.z.yan@intel.com
Cc: bp@alien8.de
Cc: maria.n.dimakopoulou@gmail.com
Cc: acme@redhat.com
Link: http://lkml.kernel.org/r/1384275531-10892-3-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
idlestates in sysfs are counted from 0.
This fixes a wrong error message.
Current behavior on a machine with 4 sleep states is:
cpupower idle-set -e 4
Idlestate 4 enabled on CPU 0
-----Wrong---------------------
cpupower idle-set -e 5
Idlestate enabling not supported by kernel
-----Must and now will be -----
cpupower idle-set -e 5
Idlestate 6 not available on CPU 0
-------------------------------
cpupower idle-set -e 6
Idlestate 6 not available on CPU 0
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The cpupower idle-set subcommand was introduce recently.
This patch provides the missing manpage.
If cpupower is properly installed it will show up automatically
(similar to git), when invoking:
cpupower help idle-set
or
cpupower idle-set --help
Some parts have been taken over and adjusted from
git commit 62d6ae880e
documentation submitted by Carsten Emde.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- ACPI-based device hotplug fixes for issues introduced recently and
a fix for an older error code path bug in the ACPI PCI host bridge
driver.
- Fix for recently broken OMAP cpufreq build from Viresh Kumar.
- Fix for a recent hibernation regression related to s2disk.
- Fix for a locking-related regression in the ACPI EC driver from
Puneet Kumar.
- System suspend error code path fix related to runtime PM and
runtime PM documentation update from Ulf Hansson.
- cpufreq's conservative governor fix from Xiaoguang Chen.
- New processor IDs for intel_idle and turbostat and removal of
an obsolete Kconfig option from Len Brown.
- New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg.
- Removal of several ACPI video DMI blacklist entries that are not
necessary any more from Aaron Lu.
- Rework of the ACPI companion representation in struct device and
code cleanup related to that change from Rafael J Wysocki,
Lan Tianyu and Jarkko Nikula.
- Fixes for assigning names to ACPI-enumerated I2C and SPI devices
from Jarkko Nikula.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=QMp+
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI and power management updates from Rafael Wysocki:
- ACPI-based device hotplug fixes for issues introduced recently and a
fix for an older error code path bug in the ACPI PCI host bridge
driver
- Fix for recently broken OMAP cpufreq build from Viresh Kumar
- Fix for a recent hibernation regression related to s2disk
- Fix for a locking-related regression in the ACPI EC driver from
Puneet Kumar
- System suspend error code path fix related to runtime PM and runtime
PM documentation update from Ulf Hansson
- cpufreq's conservative governor fix from Xiaoguang Chen
- New processor IDs for intel_idle and turbostat and removal of an
obsolete Kconfig option from Len Brown
- New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg
- Removal of several ACPI video DMI blacklist entries that are not
necessary any more from Aaron Lu
- Rework of the ACPI companion representation in struct device and code
cleanup related to that change from Rafael J Wysocki, Lan Tianyu and
Jarkko Nikula
- Fixes for assigning names to ACPI-enumerated I2C and SPI devices from
Jarkko Nikula
* tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
PCI / hotplug / ACPI: Drop unused acpiphp_debug declaration
ACPI / scan: Set flags.match_driver in acpi_bus_scan_fixed()
ACPI / PCI root: Clear driver_data before failing enumeration
ACPI / hotplug: Fix PCI host bridge hot removal
ACPI / hotplug: Fix acpi_bus_get_device() return value check
cpufreq: governor: Remove fossil comment in the cpufreq_governor_dbs()
ACPI / video: clean up DMI table for initial black screen problem
ACPI / EC: Ensure lock is acquired before accessing ec struct members
PM / Hibernate: Do not crash kernel in free_basic_memory_bitmaps()
ACPI / AC: Remove struct acpi_device pointer from struct acpi_ac
spi: Use stable dev_name for ACPI enumerated SPI slaves
i2c: Use stable dev_name for ACPI enumerated I2C slaves
ACPI: Provide acpi_dev_name accessor for struct acpi_device device name
ACPI / bind: Use (put|get)_device() on ACPI device objects too
ACPI: Eliminate the DEVICE_ACPI_HANDLE() macro
ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_node
cpufreq: OMAP: Fix compilation error 'r & ret undeclared'
PM / Runtime: Fix error path for prepare
PM / Runtime: Update documentation around probe|remove|suspend
cpufreq: conservative: set requested_freq to policy max when it is over policy max
...
gcc complaint on 32-bit system:
/home/acme/git/linux/tools/lib/traceevent/event-parse.c: In function ‘eval_num_arg’:
/home/acme/git/linux/tools/lib/traceevent/event-parse.c:3468:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
This is because the eval_num_arg returns everything as an 'unsigned long long',
so it converts a void pointer to a wider integer, fix it by converting the void
pointer to an integer of the same size, 'unsigned long', before casting it to
'unsigned long long'.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-yllx4aqcg06v5n4vjpwiiuld@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa reported that the scsi_dispatch_cmd_done event failed to parse
with:
Error: expected type 5 but read 4
Error: expected type 5 but read 4
The problem is with this part of the print_fmt:
__print_symbolic(((REC->result) >> 24) & 0xff, ...
The __print_symbolic() helper function's first parameter is the field to
use to determine what symbol to print based on the value of the result.
The parser can handle one operation, but it can not handle multiple
operations ('>>' and '&').
Add code to process all operations for the field argument for
__print_symbolic() as well as __print_flags().
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131118142314.27ca334b@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After processing all group descriptors or encountering an error, it
frees all descriptors. However, current logic can leak memory since it
might not traverse all descriptors.
Note that the 'i' can have different value than nr_groups when an error
occurred and it's safe to call free(desc[i].name) for every desc since
we already make it NULL when it's reused for group names.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384741244-7271-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When processing event group descriptor in perf file header, we reuse an
allocated group name but forgot to prevent it from freeing.
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384741244-7271-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The problem is that when a thread overrides its default ":%pid" comm, we
forget to tag the thread comm as overriden. Hence, this overriden comm
is not inherited on future forks. Fix it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131116010207.GA18855@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Ingo Molnar:
"Tooling changes only: it includes the ARM tooling fixlets, various
other fixes, smaller updates, minor cleanups"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf record: Add an option to force per-cpu mmaps
perf probe: Add '--demangle'/'--no-demangle'
perf ui browser: Fix segfault caused by off by one handling END key
perf symbols: Limit max callchain using max_stack on DWARF unwinding too
perf evsel: Introduce perf_evsel__prev() method
perf tools: Use perf_evlist__{first,last}, perf_evsel__next
perf tools: Synthesize anon MMAP records again
perf top: Add missing newline if the 'uid' is invalid
perf tools: Remove trivial extra semincolon
perf trace: Tweak summary output
tools/perf/build: Fix feature-libunwind-debug-frame handling
tools/perf/build: Fix timerfd feature check
some robustness fixes for broken virtio devices, plus minor tweaks.
[vs last pull request: added the virtio-scsi broken vq escape patch, which
I somehow lost.]
Cheers,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=vY2L
-----END PGP SIGNATURE-----
Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull virtio updates from Rusty Russell:
"Nothing really exciting: some groundwork for changing virtio endian,
and some robustness fixes for broken virtio devices, plus minor
tweaks"
* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
virtio_scsi: verify if queue is broken after virtqueue_get_buf()
x86, asmlinkage, lguest: Pass in globals into assembler statement
virtio: mmio: fix signature checking for BE guests
virtio_ring: adapt to notify() returning bool
virtio_net: verify if queue is broken after virtqueue_get_buf()
virtio_console: verify if queue is broken after virtqueue_get_buf()
virtio_blk: verify if queue is broken after virtqueue_get_buf()
virtio_ring: add new function virtqueue_is_broken()
virtio_test: verify if virtqueue_kick() succeeded
virtio_net: verify if virtqueue_kick() succeeded
virtio_ring: let virtqueue_{kick()/notify()} return a bool
virtio_ring: change host notification API
virtio_config: remove virtio_config_val
virtio: use size-based config accessors.
virtio_config: introduce size-based accessors.
virtio_ring: plug kmemleak false positive.
virtio: pm: use CONFIG_PM_SLEEP instead of CONFIG_PM
By default, when tasks are specified (i.e. -p, -t or -u options)
per-thread mmaps are created.
Add an option to override that and force per-cpu mmaps.
Further comments by peterz:
So this option allows -t/-p/-u to create one buffer per cpu and attach
all the various thread/process/user tasks' their counters to that one
buffer?
As opposed to the current state where each such counter would have its
own buffer.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1383313899-15987-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
You can't pass demangled name into "perf probe", because of special chars:
./perf probe -f -x /tmp/a.out 'foo(int)'
Semantic error :There is non-digit char in line number.
And you can't even pass without demangling (because it search symbol in
DSO with demangle=true):
./perf probe -f -x /tmp/a.out _Z3fooi
no symbols found in /tmp/a.out, maybe install a debug package?
However:
nm /tmp/a.out | grep foo
000000000040056d T _Z3fooi
After this patch, using the next command:
./perf probe -f --no-demangle -x /tmp/a.out _Z3fooi
probe will be successfully added.
Signed-off-by: Azat Khuzhin <a3at.mail@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1382947464-31266-1-git-send-email-a3at.mail@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
$ perf record ls
$ perf report
Press 'down enter end'
Result:
Program received signal SIGSEGV, Segmentation fault.
The UI browser, used on a argv array would access past the end of the
array on SEEK_END because it wasn't using 'nr_entries - 1', fix it.
Reported-by: v.karpov@samsung.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=59291
Link: http://lkml.kernel.org/n/tip-3g83ipasqi219ktv764xzzjs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was affecting only frame-pointer (fp) based callchain processing.
Usage example:
perf top --call-graph dwarf,1024 --max-stack 2
Works for any tool that does callchain resolving and provides a
--max-stack option.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/n/tip-eu45v8s3tq9ruay8tpfyon79@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just one use so far, on the hists browser, for completeness since there
we use perf_evlist__{first,last} and perf_evsel__next() for handling the
TAB and UNTAB keys.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d09l4lejp5427enuf3igpckw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In a few remaining places where the equivalent open coded variant was
still being used.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4vjnloi5fisilykwxalb5nel@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When introducing the PERF_RECORD_MMAP2 in:
5c5e854bc7 perf tools: Add attr->mmap2 support
A check for the number of entries parsed by sscanf was introduced that
assumed all of the 8 fields needed to be correctly parsed so that
particular /proc/pid/maps line would be considered synthesizable.
That broke anon records synthesizing, as it doesn't have the 'execname'
field.
Fix it by keeping the sscanf return check, changing it to not require
that the 'execname' variable be parsed, so that the preexisting logic
can kick in and set it to '//anon'.
This should get things like JIT profiling working again.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Bill Gray <bgray@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Richard Fowles <rfowles@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/n/tip-bo4akalno7579shpz29u867j@git.kernel.org
[ commit log message is mine, dzickus reported the problem with a patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add missing newline if the 'uid' is invalid:
hubble:~> perf top --stdio -u help
Error:
Invalid User: helphubble:~>
Fixed by this patch:
comet:~/tip/tools/perf> perf top --stdio -u help
Error:
Invalid User: help
comet:~/tip/tools/perf>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131112232609.GA31474@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set feature-libunwind-debug-frame. We don't want it in
CORE_FEATURE_TESTS because it's not the generic case, but we
need to set it in the !feature-libunwind case.
Also, because x86 distributions typically don't have
dwarf_find_debug_frame() unwinding method:
test-libunwind-debug-frame.c:(.text+0x31): undefined reference to `_Ux86_64_dwarf_find_debug_frame'
Restrict this new API to ARM for the time being.
With this patch test-all.c works again, so repeat perf builds
are fast again:
comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
[...]
0,452899660 seconds time elapsed ( +- 0,11% )
While with before it was:
comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
[...]
1,674001829 seconds time elapsed ( +- 0,16% )
[ Includes fix to config/feature-checks/Makefile from Will Deacon. ]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-scsoctqzmou3rpkixCHezy9e@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
'feature_timerfd' is checked all the time and calculated explicitly,
in a serial fashion. Add it to CORE_FEATURE_TESTS which causes it to
be built in parallel, using the newfangled parallel build autodetection
code.
This shaves 137 msecs off the perf build time on my system, which
speeds up the common case cached build by 43%:
Before:
comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
[...]
0,453771441 seconds time elapsed ( +- 0,09% )
After:
comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
[...]
0,316290185 seconds time elapsed ( +- 0,24% )
Cc: David Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-bb92CmexihopoSyqnkqepvsy@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf updates from Ingo Molnar:
"A number of fixes:
- Fix segfault on perf trace -i perf.data, from Namhyung Kim.
- Fix segfault with --no-mmap-pages, from David Ahern.
- Don't force a refresh during progress update in the TUI, greatly
reducing startup costs, fix from Patrick Palka.
- Fix sw clock event period test wrt not checking if using >
max_sample_freq.
- Handle throttle events in 'object code reading' test, fix from
Adrian Hunter.
- Prevent condition that all sort keys are elided, fix from Namhyung
Kim.
- Round mmap pages to power 2, from David Ahern.
And a number of late arrival changes:
- Add summary only option to 'perf trace', suppressing the decoding
of events, from David Ahern
- 'perf trace --summary' formatting simplifications, from Pekka
Enberg.
- Beautify fifth argument of mmap() as fd, in 'perf trace', from
Namhyung Kim.
- Add direct access to dynamic arrays in libtraceevent, from Steven
Rostedt.
- Synthesize non-exec MMAP records when --data used, allowing the
resolution of data addresses to symbols (global variables, etc), by
Arnaldo Carvalho de Melo.
- Code cleanups by David Ahern and Adrian Hunter"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
tools lib traceevent: Add direct access to dynamic arrays
perf target: Shorten perf_target__ to target__
perf tests: Handle throttle events in 'object code reading' test
perf evlist: Refactor mmap_pages parsing
perf evlist: Round mmap pages to power 2 - v2
perf record: Fix segfault with --no-mmap-pages
perf trace: Add summary only option
perf trace: Simplify '--summary' output
perf trace: Change syscall summary duration order
perf tests: Compensate lower sample freq with longer test loop
perf trace: Fix segfault on perf trace -i perf.data
perf trace: Separate tp syscall field caching into init routine to be reused
perf trace: Beautify fifth argument of mmap() as fd
perf tests: Use lower sample_freq in sw clock event period test
perf tests: Check return of perf_evlist__open sw clock event period test
perf record: Move existing write_output into helper function
perf record: Use correct return type for write()
perf tools: Prevent condition that all sort keys are elided
perf machine: Simplify synthesize_threads method
perf machine: Introduce synthesize_threads method out of open coded equivalent
...
Pull thermal management updates from Zhang Rui:
"This time we only have a few changes as there are no soc thermal
changes from Eduardo. The only big change is the introduction of
TMON, a tool to help visualize, tune, and test the thermal subsystem.
The rest is mostly cleanups and fixes all over.
Specifics:
- introduce TMON, a tool base on thermal sysfs I/F. It can be used
to visualize, tune and test the thermal subsystem.
- fix a zone/cooling device binding problem, when both thermal zone
bind parameters and .bind() callback are available"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
tools/thermal: Introduce tmon, a tool for thermal subsystem
thermal: Fix binding problem when there is thermal zone params
thermal: cpu_cooling: fix return value check in cpufreq_cooling_register()
Thermal: Check for validity before doing kfree
thermal/intel_powerclamp: Add newer CPU models
Thermal: Tidy up error handling in powerclamp_init
thermal: Kconfig: cosmetic fixes
ACPI/thermal : Remove zone disabled warning
typo in drivers/thermal/Kconfig: lpatform instead of platform
Pull ARM updates from Russell King:
"Included in this series are:
1. BE8 (modern big endian) changes for ARM from Ben Dooks
2. big.Little support from Nicolas Pitre and Dave Martin
3. support for LPAE systems with all system memory above 4GB
4. Perf updates from Will Deacon
5. Additional prefetching and other performance improvements from Will.
6. Neon-optimised AES implementation fro Ard.
7. A number of smaller fixes scattered around the place.
There is a rather horrid merge conflict in tools/perf - I was never
notified of the conflict because it originally occurred between Will's
tree and other stuff. Consequently I have a resolution which Will
forwarded me, which I'll forward on immediately after sending this
mail.
The other notable thing is I'm expecting some build breakage in the
crypto stuff on ARM only with Ard's AES patches. These were merged
into a stable git branch which others had already pulled, so there's
little I can do about this. The problem is caused because these
patches have a dependency on some code in the crypto git tree - I
tried requesting a branch I can pull to resolve these, and all I got
each time from the crypto people was "we'll revert our patches then"
which would only make things worse since I still don't have the
dependent patches. I've no idea what's going on there or how to
resolve that, and since I can't split these patches from the rest of
this pull request, I'm rather stuck with pushing this as-is or
reverting Ard's patches.
Since it should "come out in the wash" I've left them in - the only
build problems they seem to cause at the moment are with randconfigs,
and since it's a new feature anyway. However, if by -rc1 the
dependencies aren't in, I think it'd be best to revert Ard's patches"
I resolved the perf conflict roughly as per the patch sent by Russell,
but there may be some differences. Any errors are likely mine. Let's
see how the crypto issues work out..
* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits)
ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h"
ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg().
ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h
ARM: 7871/1: amba: Extend number of IRQS
ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise()
ARM: 7872/1: Support arch_irq_work_raise() via self IPIs
ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode
ARM: 7878/1: nommu: Implement dummy early_paging_init()
ARM: 7876/1: clear Thumb-2 IT state on exception handling
ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}()
ARM: footbridge: fix build warnings for netwinder
ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu
ARM: fix misplaced arch_virt_to_idmap()
ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown
ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation
ARM: 7869/1: remove unused XSCALE_PMU Kconfig param
ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t
ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments
ARM: 7862/1: pcpu: replace __get_cpu_var_uses
ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code
...
Soft dirty bit allows us to track which pages are written since the last
clear_ref (by "echo 4 > /proc/pid/clear_refs".) This is useful for
userspace applications to know their memory footprints.
Note that the kernel exposes this flag via bit[55] of /proc/pid/pagemap,
and the semantics is not a default one (scheduled to be the default in the
near future.) However, it shifts to the new semantics at the first
clear_ref, and the users of soft dirty bit always do it before utilizing
the bit, so that's not a big deal. Users must avoid relying on the bit in
page-types before the first clear_ref.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Support the next generation Intel Atom processor
mirco-architecture, formerly called Silvermont.
The server version, formerly called "Avoton",
is named the "Intel(R) Atom(TM) Processor C2000 Product Family".
The client version, formerly called "Bay Trail",
is named the "Intel Atom Processor Z3000 Series",
as well as various "Intel Pentium Processor"
and "Intel Celeron Processor" brands, depending
on form-factor.
Silvermont has a set of MSRs not far off from NHM,
but the RAPL register set is a sub-set of those previously supported.
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
. Add summary only option to 'perf trace', suppressing the decoding of
events, from David Ahern
. 'perf trace --summary' formatting simplifications, from Pekka Emberg.
. Beautify fifth argument of mmap() as fd, in 'perf trace', from Namhyung Kim.
. Fix segfault on perf trace -i perf.data, from Namhyung Kim.
. Fix segfault with --no-mmap-pages, from David Ahern.
. Round mmap pages to power 2, from David Ahern.
. Add direct access to dynamic arrays in libtraceevent, from Steven Rostedt.
. Handle throttle events in 'object code reading' test, fix from Adrian Hunter.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=HiWt
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
* Add summary only option to 'perf trace', suppressing the decoding of
events, from David Ahern
* 'perf trace --summary' formatting simplifications, from Pekka Emberg.
* Beautify fifth argument of mmap() as fd, in 'perf trace', from Namhyung Kim.
* Fix segfault on perf trace -i perf.data, from Namhyung Kim.
* Fix segfault with --no-mmap-pages, from David Ahern.
* Round mmap pages to power 2, from David Ahern.
* Add direct access to dynamic arrays in libtraceevent, from Steven Rostedt.
* Handle throttle events in 'object code reading' test, fix from Adrian Hunter.
* Prevent condition that all sort keys are elided, fix from Namhyung Kim.
* Synthesize non-exec MMAP records when --data used, allowing the resolution of
data addresses to symbols (global variables, etc).
* Don't force a refresh during progress update in the TUI, greatly reducing
startup costs, fix from Patrick Palka.
* Fix sw clock event period test wrt not checking if using > max_sample_freq.
* Code cleanups by David Ahern and Adrian Hunter.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri Olsa was writing a plugin for the cfg80211_tx_mlme_mgmt trace
event, and was not able to get the implemented function working.
The event's print fmt looks like:
"netdev:%s(%d), ftype:0x%.2x", REC->name, REC->ifindex,
__le16_to_cpup((__le16 *)__get_dynamic_array(frame))
As there's no helper function for __le16_to_cpup(), Jiri was creating one
with a plugin. But unfortunately, it would not work even though he set
up the plugin correctly.
The problem is that the function parameters do not handle the helper
function "__get_dynamic_array()", and that passes in a NULL pointer.
Adding PRINT_DYNAMIC_ARRAY direct support to eval_num_arg() allows the
use of __get_dynamic_array() in function parameters.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131111160810.0ba9df7d@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Getting unwieldly long, for this app domain should be descriptive enough
and the use of __ to separate the class from the method names should
help with avoiding clashes with other code bases.
Reported-by: David Ahern <dsahern@gmail.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131112113427.GA4053@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Unhandled events cause an error that fails the test, fix it.
Reported-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/5281DFE5.3000909@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Logic will be re-used for the out-pages argument for mmap based writes
in perf-record.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1384267617-3446-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently perf requires the -m / --mmap_pages option to be a power of 2.
To be more user friendly perf should automatically round this up to the
next power of 2.
Currently:
$ perf record -m 3 -a -- sleep 1
--mmap_pages/-m value must be a power of two.sleep: Terminated
With patch:
$ perf record -m 3 -a -- sleep 1
rounding mmap pages size to 16384 (4 pages)
...
v2: Add bytes units to rounding message per Ingo's request. Other
suggestions (e.g., prefixing INFO) should be addressed by wrapping
pr_info to catch all instances.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1384267617-3446-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian reported a segfault when using --no-out-pages:
$ tools/perf/perf record -vv --no-out-pages uname
Segmentation fault (core dumped)
The same occurs with --no-mmap-pages. Fix by checking that str is
non-NULL before parsing it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1384267617-3446-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Per request from Pekka make --summary a summary only option meaning do
not show the individual system calls. Add another option to see all
syscalls along with the summary. In addition use 's' and 'S' as
shortcuts for the options.
Requested-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Pekka Enberg <penberg@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1384273875-3751-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch duration order to minimum, average, maximum for the '--summary'
command line option because it's more natural to read.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: http://lkml.kernel.org/r/1384265410-12344-1-git-send-email-penberg@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Doesn't work for me:
./perf test -v 19
19: Test software clock events have valid period values :
--- start ---
mmap size 528384B
mmap size 528384B
All (0) samples have period value of 1!
---- end ----
Test software clock events have valid period values: FAILED!
Compensate the lower freq introduced in 67c1e4a53b with a longer loop,
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/5281D3B8.2030104@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When replaying a previous record session, it'll get a segfault since it
doesn't initialize raw_syscalls enter/exit tracepoint's evsel->priv for
caching the format fields.
So fix it by properly initializing sys_enter/exit evsels that comes from
reading the perf.data file header.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384237500-22991-2-git-send-email-namhyung@kernel.org
[ Split the syscall tp field caching part in the previous patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to set this in evsels coming out of a perf.data file header, not
just for new ones created for live sessions.
So separate the code that caches the syscall entry/exit tracepoint
format fields into a new function that will be used in the next
changeset.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131112115700.GC4053@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The fifth argument of mmap syscall is fd and it often contains -1 as a
value for anon mappings. Without this patch it doesn't show the file
name as well as it shows -1 as 4294967295.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384237500-22991-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
not compiled for ages, and recent versions of gcc for it are broken.
Remove support for it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=V6n6
-----END PGP SIGNATURE-----
Merge tag 'h8300-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull h8300 platform removal from Guenter Roeck:
"The patch series has been in -next for more than one relase cycle. I
did get a number of Acks, and no objections.
H8/300 has been dead for several years, the kernel for it has not
compiled for ages, and recent versions of gcc for it are broken.
Remove support for it"
* tag 'h8300-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
CREDITS: Add Yoshinori Sato for h8300
fs/minix: Drop dependency on H8300
Drop remaining references to H8/300 architecture
Drop MAINTAINERS entry for H8/300
watchdog: Drop references to H8300 architecture
net/ethernet: Drop H8/300 Ethernet driver
net/ethernet: smsc9194: Drop conditional code for H8/300
ide: Drop H8/300 driver
Drop support for Renesas H8/300 (h8300) architecture
Pull perf updates from Ingo Molnar:
"As a first remark I'd like to note that the way to build perf tooling
has been simplified and sped up, in the future it should be enough for
you to build perf via:
cd tools/perf/
make install
(ie without the -j option.) The build system will figure out the
number of CPUs and will do a parallel build+install.
The various build system inefficiencies and breakages Linus reported
against the v3.12 pull request should now be resolved - please
(re-)report any remaining annoyances or bugs.
Main changes on the perf kernel side:
* Performance optimizations:
. perf ring-buffer code optimizations, by Peter Zijlstra
. perf ring-buffer code optimizations, by Oleg Nesterov
. x86 NMI call-stack processing optimizations, by Peter Zijlstra
. perf context-switch optimizations, by Peter Zijlstra
. perf sampling speedups, by Peter Zijlstra
. x86 Intel PEBS processing speedups, by Peter Zijlstra
* Enhanced hardware support:
. for Intel Ivy Bridge-EP uncore PMUs, by Zheng Yan
. for Haswell transactions, by Andi Kleen, Peter Zijlstra
* Core perf events code enhancements and fixes by Oleg Nesterov:
. for uprobes, if fork() is called with pending ret-probes
. for uprobes platform support code
* New ABI details by Andi Kleen:
. Report x86 Haswell TSX transaction abort cost as weight
Main changes on the perf tooling side (some of these tooling changes
utilize the above kernel side changes):
* 'perf report/top' enhancements:
. Convert callchain children list to rbtree, greatly reducing the
time taken for callchain processing, from Namhyung Kim.
. Add new COMM infrastructure, further improving histogram
processing, from Frédéric Weisbecker, one fix from Namhyung Kim.
. Add /proc/kcore based live-annotation improvements, including
build-id cache support, multi map 'call' instruction navigation
fixes, kcore address validation, objdump workarounds. From
Adrian Hunter.
. Show progress on histogram collapsing, that can take a long
time, from Namhyung Kim.
. Add --max-stack option to limit callchain stack scan in 'top'
and 'report', improving callchain processing when reducing the
stack depth is an option, from Waiman Long.
. Add new option --ignore-vmlinux for perf top, from Willy
Tarreau.
* 'perf trace' enhancements:
. 'perf trace' now can can use a 'perf probe' dynamic tracepoints
to hook into the userspace -> kernel pathname copy so that it
can map fds to pathnames without reading /proc/pid/fd/ symlinks.
From Arnaldo Carvalho de Melo.
. Show VFS path associated with fd in live sessions, using a
'vfs_getname' 'perf probe' created dynamic tracepoint or by
looking at /proc/pid/fd, from Arnaldo Carvalho de Melo.
. Add 'trace' beautifiers for lots of syscall arguments, from
Arnaldo Carvalho de Melo.
. Implement more compact 'trace' output by suppressing zeroed
args, from Arnaldo Carvalho de Melo.
. Show thread COMM by default in 'trace', from Arnaldo Carvalho de
Melo.
. Add option to show full timestamp in 'trace', from David Ahern.
. Add 'record' command in 'trace', to record raw_syscalls:*, from
David Ahern.
. Add summary option to dump syscall statistics in 'trace', from
David Ahern.
. Improve error messages in 'trace', providing hints about system
configuration steps needed for using it, from Ramkumar
Ramachandra.
. 'perf trace' now emits hints as to why tracing is not possible,
helping the user to setup the system to allow tracing in the
desired permission granularity, telling if the problem is due to
debugfs not being mounted or with not enough permission for
!root, /proc/sys/kernel/perf_event_paranoit value, etc. From
Arnaldo Carvalho de Melo.
* 'perf record' enhancements:
. Check maximum frequency rate for record/top, emitting better
error messages, from Jiri Olsa.
. 'perf record' code cleanups, from David Ahern.
. Improve write_output error message in 'perf record', from Adrian
Hunter.
. Allow specifying B/K/M/G unit to the --mmap-pages arguments,
from Jiri Olsa.
. Fix command line callchain attribute tests to handle the new
-g/--call-chain semantics, from Arnaldo Carvalho de Melo.
* 'perf kvm' enhancements:
. Disable live kvm command if timerfd is not supported, from David
Ahern.
. Fix detection of non-core features, from David Ahern.
* 'perf list' enhancements:
. Add usage to 'perf list', from David Ahern.
. Show error in 'perf list' if tracepoints not available, from
Pekka Enberg.
* 'perf probe' enhancements:
. Support "$vars" meta argument syntax for local variables,
allowing asking for all possible variables at a given probe
point to be collected when it hits, from Masami Hiramatsu.
* 'perf sched' enhancements:
. Address the root cause of that 'perf sched' stack initialization
build slowdown, by programmatically setting a big array after
moving the global variable back to the stack. Fix from Adrian
Hunter.
* 'perf script' enhancements:
. Set up output options for in-stream attributes, from Adrian
Hunter.
. Print addr by default for BTS in 'perf script', from Adrian
Juntmer
* 'perf stat' enhancements:
. Improved messages when doing profiling in all or a subset of
CPUs using a workload as the session delimitator, as in:
'perf stat --cpu 0,2 sleep 10s'
from Arnaldo Carvalho de Melo.
. Add units to nanosec-based counters in 'perf stat', from David
Ahern.
. Remove bogus info when using 'perf stat' -e cycles/instructions,
from Ramkumar Ramachandra.
* 'perf lock' enhancements:
. 'perf lock' fixes and cleanups, from Davidlohr Bueso.
* 'perf test' enhancements:
. Fixup PERF_SAMPLE_TRANSACTION handling in sample synthesizing
and 'perf test', from Adrian Hunter.
. Clarify the "sample parsing" test entry, from Arnaldo Carvalho
de Melo.
. Consider PERF_SAMPLE_TRANSACTION in the "sample parsing" test,
from Arnaldo Carvalho de Melo.
. Memory leak fixes in 'perf test', from Felipe Pena.
* 'perf bench' enhancements:
. Change the procps visible command-name of invididual benchmark
tests plus cleanups, from Ingo Molnar.
* Generic perf tooling infrastructure/plumbing changes:
. Separating data file properties from session, code
reorganization from Jiri Olsa.
. Fix version when building out of tree, as when using one of
these:
$ make help | grep perf
perf-tar-src-pkg - Build perf-3.12.0.tar source tarball
perf-targz-src-pkg - Build perf-3.12.0.tar.gz source tarball
perf-tarbz2-src-pkg - Build perf-3.12.0.tar.bz2 source tarball
perf-tarxz-src-pkg - Build perf-3.12.0.tar.xz source tarball
$
from David Ahern.
. Enhance option parse error message, showing just the help lines
of the options affected, from Namhyung Kim.
. libtraceevent updates from upstream trace-cmd repo, from Steven
Rostedt.
. Always use perf_evsel__set_sample_bit to set sample_type, from
Adrian Hunter.
. Memory and mmap leak fixes from Chenggang Qin.
. Assorted build fixes for from David Ahern and Jiri Olsa.
. Speed up and prettify the build system, from Ingo Molnar.
. Implement addr2line directly using libbfd, from Roberto Vitillo.
. Separate the GTK support in a separate libperf-gtk.so DSO, that
is only loaded when --gtk is specified, from Namhyung Kim.
. perf bash completion fixes and improvements from Ramkumar
Ramachandra.
. Support for Openembedded/Yocto -dbg packages, from Ricardo
Ribalda Delgado.
And lots and lots of other fixes and code reorganizations that did not
make it into the list, see the shortlog, diffstat and the Git log for
details!"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (300 commits)
uprobes: Fix the memory out of bound overwrite in copy_insn()
uprobes: Fix the wrong usage of current->utask in uprobe_copy_process()
perf tools: Remove unneeded include
perf record: Remove post_processing_offset variable
perf record: Remove advance_output function
perf record: Refactor feature handling into a separate function
perf trace: Don't relookup fields by name in each sample
perf tools: Fix version when building out of tree
perf evsel: Ditch evsel->handler.data field
uprobes: Export write_opcode() as uprobe_write_opcode()
uprobes: Introduce arch_uprobe->ixol
uprobes: Kill module_init() and module_exit()
uprobes: Move function declarations out of arch
perf/x86/intel: Add Ivy Bridge-EP uncore IRP box support
perf/x86/intel/uncore: Add filter support for IvyBridge-EP QPI boxes
perf: Factor out strncpy() in perf_event_mmap_event()
tools/perf: Add required memory barriers
perf: Fix arch_perf_out_copy_user default
perf: Update a stale comment
perf: Optimize perf_output_begin() -- address calculation
...
We were using it at 10 kHz, which doesn't work in machines where somehow
the max freq was auto reduced by the kernel:
[root@ssdandy ~]# perf test 19
19: Test software clock events have valid period values : FAILED!
[root@ssdandy ~]# perf test -v 19
19: Test software clock events have valid period values :
--- start ---
Couldn't open evlist: Invalid argument
---- end ----
Test software clock events have valid period values: FAILED!
[root@ssdandy ~]#
[root@ssdandy ~]# cat /proc/sys/kernel/perf_event_max_sample_rate
7000
Reducing it to 500 Hz should be good enough for this test and also
shouldn't affect what it is testing.
But warn the user if it fails, informing the knob and the freq tried.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-548rhj1uo6xbwnxa95kw3hqe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were not checking if we successfully opened the counters, i.e. if
sys_perf_event_open worked, when it doesn't in this test, we were
continuing anyway and then segfaulting when trying to access the file
descriptor array, that at that point had been freed in perf_evlist__open
error path:
[root@ssdandy ~]# perf test -v 19
19: Test software clock events have valid period values :
--- start ---
Segmentation fault (core dumped)
[root@ssdandy ~]#
Do the check and bail out instead.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6qy8ljkn0e9hm7bh7keo5z68@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Code move only; no logic changes. In preparation for the mmap based
output option in the next patch.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1383884605-30968-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
write() returns a 'ssize_t' not an 'int'.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1383906470-21002-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If given sort keys are all elided there'll be no output except for the
overhead column - actually the TUI shows a noisy output. In this case
it'd be better to show up the sort keys rather than elide.
Before:
$ perf report -s comm -c perf
(...)
# Overhead
# ........
#
100.00%
After:
$ perf report -s comm -c perf
(...)
# Overhead Command
# ........ .......
#
100.00% perf
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383900822-14609-1-git-send-email-namhyung@kernel.org
[ Us curly braces around multi-line statements, as requested by Ingo Molnar ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Several tools (top, kvm) don't need to be called back to process each of
the syntheiszed records, instead relying on the machine__process_event
function to change the per machine data structures that represent
threads and mmaps, so provide a way to ask for this common idiom.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pusqibp8n3c4ynegd1frn4zd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Further simplifications to be done on following patch, as most tools
don't use the callback, using instead just the canned
machine__process_event one.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-r1m0vuuj3cat4bampno9yc8d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf_event_attr.mmap_data is set the kernel will generate
PERF_RECORD_MMAP events when non-exec (data, SysV mem) mmaps are
created, so we need to synthesize from /proc/pid/maps for existing
threads, as we do for exec mmaps.
Right now just 'perf record' does it, but any other tool that uses
perf_event__synthesize_thread(s|map) can request it.
Reported-by: Don Zickus <dzickus@redhat.com>
Tested-by: Don Zickus <dzickus@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bill Gray <bgray@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Fowles <rfowles@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ihwzraikx23ian9txinogvv2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Most uses of the evsel constructor are followed by a call to
perf_evlist__add with an idex of evlist->nr_entries, so make rename
the current constructor to perf_evsel__new_idx and remove the need
for passing the constructor for the common case.
We still need the new_idx variant because the way groups are handled,
with evsel->nr_members holding the number of entries in an evlist,
partitioning the evlist into sublists inside a single linked list.
This asks for a clarifying refactoring, but for now simplify the non
parser cases, so that tool writers don't have to bother with evsel idx
setting.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zy9tskx6jqm2rmw7468zze2a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Each call to tui_progress__update() would forcibly refresh the entire
screen. This is somewhat inefficient and causes noticable flickering
during the startup of perf-report, especially on large/slow terminals.
It looks like the force-refresh in tui_progress__update() serves no
purpose other than to clear the screen so that the progress bar of a
previous operation does not subsume that of a subsequent operation. But
we can do just that in a much more efficient manner by clearing only the
region that a previous progress bar may have occupied before repainting
the new progress bar. Then the force-refresh could be removed with no
change in visuals.
This patch disables the slow force-refresh in tui_progress__update() and
instead calls SLsmg_fill_region() on the entire area that the progress
bar may occupy before repainting it. This change makes the startup of
perf-report much faster and appear much "smoother".
It turns out that this was a big bottleneck in the startup speed of
perf-report -- with this patch, perf-report starts up ~2x faster (1.1s
vs 0.55s) on my machines. (These numbers were measured by running "time
perf report" on an 8MB perf.data and pressing 'q' immediately.)
Signed-off-by: Patrick Palka <patrick@parcs.ath.cx>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1382747149-9716-1-git-send-email-patrick@parcs.ath.cx
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is no point in sort.h including itself.
The include was added when the file was created, in commit "perf tools:
Create util/sort.and use it" (dd68ada2d) and added a include to "sort.h"
in lot of files (all the files that started using the file). It was
probably added by mistake on sort.h too.
Signed-off-by: Rodrigo Campos <rodrigo@sdfg.com.ar>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383776454-10595-1-git-send-email-rodrigo@sdfg.com.ar
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead do the lookups just when creating the tracepoints, initially for
the most common, raw_syscalls:sys_{enter,exit}.
It works by having evsel->priv have a per tracepoint structure with
entries for the fields, for direct access, with the offset and a
function to get the value from the sample, doing the swap if needed.
Using a simple workload that does M millions write syscalls, we go from:
# perf stat -i -e cycles /tmp/oldperf trace ./sc_hello 100 > /dev/null
Performance counter stats for '/tmp/oldperf trace ./sc_hello 100':
8,366,771,459 cycles
2.668025928 seconds time elapsed
# perf stat -i -e cycles perf trace ./sc_hello 100 > /dev/null
Performance counter stats for 'perf trace ./sc_hello 100':
8,345,187,650 cycles
2.631748425 seconds time elapsed
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-eyfhvoo510a5i10b27dnvm88@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building perf out of tree:
$ make perf-tar-src-pkg
$ tar -xf perf-<ver>.tar -C /tmp
$ cd /tmp/perf<ver>
$ make -C tools/perf
you get this warning message:
make[1]: *** No rule to make target `kernelversion'. Stop.
Fix it by saving the perf version in the tar file and using that for the
out of tree builds.
v2: removed short form request and fixed up version string from usual output.
Signed-off-by: David Ahern <dsahern@gmail.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1383753335-25782-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not needed since this cset:
fcf65bf149af: perf evsel: Cache associated event_format
So lets trim this struct a bit.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-j8setslokt0goiwxq9dogzqm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Increasingly, Linux is running on thermally constrained devices. The simple
thermal relationship between processor and fan has become past for modern
computers.
As hardware vendors cope with the thermal constraints on their products,
more sensors are added, new cooling capabilities are introduced. The
complexity of the thermal relationship can grow exponentially among cooling
devices, zones, sensors, and trip points. They can also change dynamically.
To expose such relationship to the userspace, Linux generic thermal layer
introduced sysfs entry at /sys/class/thermal with a matrix of symbolic
links, trip point bindings, and device instances. To traverse such
matrix by hand is not a trivial task. Testing is also difficult in that
thermal conditions are often exception cases that hard to reach in
normal operations.
TMON is conceived as a tool to help visualize, tune, and test the
complex thermal subsystem.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Here's the big char/misc driver patchset for 3.13-rc1.
Lots of stuff in here, including some new drivers for Intel's "MIC"
co-processor devices, and a new eeprom driver. Other things include the
driver attribute cleanups, extcon driver updates, hyperv updates, and a
raft of other miscellaneous driver fixes.
All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEUEABECAAYFAlJ6v9kACgkQMUfUDdst+ykPzACXdwm/1DryfqnyhVPyITNAKcma
WACg1Yu5mtIvJg3NsN/7Ff0Qfj6GzYY=
=MIEe
-----END PGP SIGNATURE-----
Merge tag 'char-misc-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc patches from Greg KH:
"Here's the big char/misc driver patchset for 3.13-rc1.
Lots of stuff in here, including some new drivers for Intel's "MIC"
co-processor devices, and a new eeprom driver. Other things include
the driver attribute cleanups, extcon driver updates, hyperv updates,
and a raft of other miscellaneous driver fixes.
All of these have been in linux-next for a while"
* tag 'char-misc-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (121 commits)
misc: mic: Fixes for randconfig build errors and warnings.
tifm: fix error return code in tifm_7xx1_probe()
w1-gpio: Use devm_* functions
w1-gpio: Detect of_gpio_error for first gpio
uio: Pass pointers to virt_to_page(), not integers
uio: fix memory leak
misc/at24: avoid infinite loop on write()
misc/93xx46: avoid infinite loop on write()
misc: atmel_pwm: add deferred-probing support
mei: wd: host_init propagate error codes from called functions
mei: replace stray pr_debug with dev_dbg
mei: bus: propagate error code returned by mei_me_cl_by_id
mei: mei_cl_link remove duplicated check for open_handle_count
mei: print correct device state during unexpected reset
mei: nfc: fix memory leak in error path
lkdtm: add tests for additional page permissions
lkdtm: adjust recursion size to avoid warnings
lkdtm: isolate stack corruption test
mei: move host_clients_map cleanup to device init
mei: me: downgrade two errors to debug level
...
They convey no information, perhaps I was bitten by some snake at some
point, complete the detox by naming the last of those arguments more
sensibly.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-u1r0dnjoro08dgztiy2g3t2q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding the check for maximum allowed frequency rate defined in following
file:
/proc/sys/kernel/perf_event_max_sample_rate
When we cross the maximum value we fail and display detailed error
message with advise.
$ perf record -F 3000 ls
Maximum frequency rate (2000) reached.
Please use -F freq option with lower value or consider
tweaking /proc/sys/kernel/perf_event_max_sample_rate.
In case user does not specify the frequency and the default value cross
the maximum, we display warning and set the frequency value to the
current maximum.
$ perf record ls
Lowering default frequency rate to 2000.
Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate.
Same messages are used for 'perf top'.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383660887-1734-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Shorten it, "finding" it is an implementation detail, what callers want
is the pathname, not to ask for it to _always_ do the lookup.
And the existing implementation already caches it, i.e. it doesn't
"finds" it on every call.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-r24wa4bvtccg7mnkessrbbdj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving sysfs code into generic fs object and preparing it to carry
procfs support.
This should be merged with tools/lib/lk/debugfs.c at some point in the
future.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383660887-1734-2-git-send-email-jolsa@redhat.com
[ Added fs__ namespace qualifier to some more functions ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently 'perf list' is not very helpful if you forget the syntax:
$ perf list -h
List of pre-defined events (to be used in -e):
After:
$ perf list -h
usage: perf list [hw|sw|cache|tracepoint|pmu|event_glob]
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/527133AD.4030003@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With a return after the if check an indentation level can be removed.
Indentation shift only; no functional changes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1383149707-1008-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
feature_check needs to be invoked through call, and LDFLAGS may not be
set so quotes are needed.
Thanks to Jiri for spotting the quotes around LDFLAGS; that one was
driving me nuts with the upcoming timerfd feature detection.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383064996-20933-1-git-send-email-dsahern@gmail.com
[ Fixed conflict with 8a0c4c2843 ("perf tools: Fix libunwind build and feature detection for 32-bit build") ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the OS does not have timerfd support (e.g., older OS'es like RHEL5)
disable perf kvm stat live.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383064996-20933-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The __hists__add_{branch,mem}_entry() does almost the same thing that
__hists__add_entry() does. Consolidate them into one.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1383202576-28141-2-git-send-email-namhyung@kernel.org
[ Fixup clash with new COMM infrastructure ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the pevent_print_func_field() that will look up a field that is
expected to be a function pointer, and it will print the function name
and offset of the address given by the field.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131101215501.869542711@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the flags EVENT_FL_NOHANDLE and EVENT_FL_PRINTRAW to the event flags
to have the event either ignore the register handler or to ignore the
handler and also print the raw format respectively.
This allows a tool to force a raw format or non handle for an event.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131101215501.655258742@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently when using the raw format for fields, when looking at a
character array, to determine if it is a string or not, we make sure all
characters are "isprint()". If not, then we consider it a numeric array,
and print the hex numbers of the characters instead.
But it seems that '\n' fails the isprint() check! Add isspace() to the
check as well, such that if all characters pass isprint() or isspace()
it will assume the character array is a string.
Reported-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Xenia Ragiadakou <burzalodowa@gmail.com>
Link: http://lkml.kernel.org/r/20131101215501.465091682@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The trace_bprintk() in the kernel looks like:
ring_buffer_producer_thread: Missed: 0
ring_buffer_producer_thread: Hit: 62174350
ring_buffer_producer_thread: Entries per millisec: 6296
ring_buffer_producer_thread: 158 ns per entry
ring_buffer_producer_thread: Sleeping for 10 secs
ring_buffer_producer_thread: Starting ring buffer hammer
ring_buffer_producer_thread: End ring buffer hammer
But the current output looks like this:
ring_buffer_producer_thread : Time: 9407018 (usecs)
ring_buffer_producer_thread : Overruns: 43285485
ring_buffer_producer_thread : Read: 4405365 (by events)
ring_buffer_producer_thread : Entries: 0
ring_buffer_producer_thread : Total: 47690850
ring_buffer_producer_thread : Missed: 0
ring_buffer_producer_thread : Hit: 47690850
Remove the space between the function and the colon.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131101215501.272654481@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The kernel has a few events with a format similar to this excerpt:
field:unsigned int len; offset:12; size:4; signed:0;
field:__data_loc unsigned char[] data_array; offset:16; size:4; signed:0;
print fmt: "%s", __print_hex(__get_dynamic_array(data_array), REC->len)
trace-cmd could already parse that arg correctly, but print_str_arg()
was unable to handle the first parameter being a dynamic array. (It
just printed a "field not found" warning).
Teach print_str_arg's PRINT_HEX case to handle the nested
PRINT_DYNAMIC_ARRAY correctly. The output now matches the kernel's own
formatting for this case.
Signed-off-by: Howard Cochran <hcochran@lexmark.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1381503349-12271-1-git-send-email-hcochran@lexmark.com
[ Removed "polish compare", we don't do that here ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the format string of TP_printk() contains a %s, and the argument is
not a string, check if the argument is a pointer that might match the
printk_formats that were stored.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131101215500.698924777@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of cropping off the '"' and '\n"' from a printk format every
time it is referenced, do it when it's added. This makes it easier to
reference a printk_map and should speed things up a little.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131101215500.495619312@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo