When the hypervisor pauses a virtualised kernel the kernel will observe a
jump in timebase, this can cause spurious messages from the softlockup
detector.
Whilst these messages are harmless, they are accompanied with a stack
trace which causes undue concern and more problematically the stack trace
in the guest has nothing to do with the observed problem and can only be
misleading.
Futhermore, on POWER8 this is completely avoidable with the introduction
of the Virtual Time Base (VTB) register.
This patch (of 2):
This permits the use of arch specific clocks for which virtualised kernels
can use their notion of 'running' time, not the elpased wall time which
will include host execution time.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andrew Jones <drjones@redhat.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: chai wen <chaiw.fnst@cn.fujitsu.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Ben Zhang <benzh@chromium.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull percpu consistent-ops changes from Tejun Heo:
"Way back, before the current percpu allocator was implemented, static
and dynamic percpu memory areas were allocated and handled separately
and had their own accessors. The distinction has been gone for many
years now; however, the now duplicate two sets of accessors remained
with the pointer based ones - this_cpu_*() - evolving various other
operations over time. During the process, we also accumulated other
inconsistent operations.
This pull request contains Christoph's patches to clean up the
duplicate accessor situation. __get_cpu_var() uses are replaced with
with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr().
Unfortunately, the former sometimes is tricky thanks to C being a bit
messy with the distinction between lvalues and pointers, which led to
a rather ugly solution for cpumask_var_t involving the introduction of
this_cpu_cpumask_var_ptr().
This converts most of the uses but not all. Christoph will follow up
with the remaining conversions in this merge window and hopefully
remove the obsolete accessors"
* 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits)
irqchip: Properly fetch the per cpu offset
percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix
ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write.
percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t
Revert "powerpc: Replace __get_cpu_var uses"
percpu: Remove __this_cpu_ptr
clocksource: Replace __this_cpu_ptr with raw_cpu_ptr
sparc: Replace __get_cpu_var uses
avr32: Replace __get_cpu_var with __this_cpu_write
blackfin: Replace __get_cpu_var uses
tile: Use this_cpu_ptr() for hardware counters
tile: Replace __get_cpu_var uses
powerpc: Replace __get_cpu_var uses
alpha: Replace __get_cpu_var
ia64: Replace __get_cpu_var uses
s390: cio driver &__get_cpu_var replacements
s390: Replace __get_cpu_var uses
mips: Replace __get_cpu_var uses
MIPS: Replace __get_cpu_var uses in FPU emulator.
arm: Replace __this_cpu_ptr with raw_cpu_ptr
...
In some cases we don't want hard lockup detection enabled by default.
An example is when running as a guest. Introduce
watchdog_enable_hardlockup_detector(bool)
allowing those cases to disable hard lockup detection. This must be
executed early by the boot processor from e.g. smp_prepare_boot_cpu, in
order to allow kernel command line arguments to override it, as well as
to avoid hard lockup detection being enabled before we've had a chance
to indicate that it's unwanted. In summary,
initial boot: default=enabled
smp_prepare_boot_cpu
watchdog_enable_hardlockup_detector(false): default=disabled
cmdline has 'nmi_watchdog=1': default=enabled
The running kernel still has the ability to enable/disable at any time
with /proc/sys/kernel/nmi_watchdog us usual. However even when the
default has been overridden /proc/sys/kernel/nmi_watchdog will initially
show '1'. To truly turn it on one must disable/enable it, i.e.
echo 0 > /proc/sys/kernel/nmi_watchdog
echo 1 > /proc/sys/kernel/nmi_watchdog
This patch will be immediately useful for KVM with the next patch of this
series. Other hypervisor guest types may find it useful as well.
[akpm@linux-foundation.org: fix build]
[dzickus@redhat.com: fix compile issues on sparc]
Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For now, soft lockup detector warns once for each case of process
softlockup. But the thread 'watchdog/n' may not always get the cpu at the
time slot between the task switch of two processes hogging that cpu to
reset soft_watchdog_warn.
An example would be two processes hogging the cpu. Process A causes the
softlockup warning and is killed manually by a user. Process B
immediately becomes the new process hogging the cpu preventing the
softlockup code from resetting the soft_watchdog_warn variable.
This case is a false negative of "warn only once for a process", as there
may be a different process that is going to hog the cpu. Resolve this by
saving/checking the task pointer of the hogging process and use that to
reset soft_watchdog_warn too.
[dzickus@redhat.com: update comment]
Signed-off-by: chai wen <chaiw.fnst@cn.fujitsu.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Most of these are the uses of &__raw_get_cpu_var for address calculation.
touch_softlockup_watchdog_sync() uses __raw_get_cpu_var to write to
per cpu variables. Use __this_cpu_write instead.
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch avoids printing the message 'enabled on all CPUs,
...' multiple times. For example, the issue can occur in the
following scenario:
1) watchdog_nmi_enable() fails to enable PMU counters and sets
cpu0_err.
2) 'echo [0|1] > /proc/sys/kernel/nmi_watchdog' is executed to
disable and re-enable the watchdog mechanism 'on the fly'.
3) If watchdog_nmi_enable() succeeds to enable PMU counters,
each CPU will print the message because step1 left behind a
non-zero cpu0_err.
if (!IS_ERR(event)) {
if (cpu == 0 || cpu0_err)
pr_info("enabled on all CPUs, ...")
The patch avoids this by clearing cpu0_err in watchdog_nmi_disable().
Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: pbonzini@redhat.com
Link: http://lkml.kernel.org/r/1407768567-171794-4-git-send-email-dzickus@redhat.com
[ Applied small cleanups. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This taint flag will be set if the system has ever entered a softlockup
state. Similar to TAINT_WARN it is useful to know whether or not the
system has been in a softlockup state when debugging.
[akpm@linux-foundation.org: apply the taint before calling panic()]
Signed-off-by: Josh Hunt <johunt@akamai.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A 'softlockup' is defined as a bug that causes the kernel to loop in
kernel mode for more than a predefined period to time, without giving
other tasks a chance to run.
Currently, upon detection of this condition by the per-cpu watchdog
task, debug information (including a stack trace) is sent to the system
log.
On some occasions, we have observed that the "victim" rather than the
actual "culprit" (i.e. the owner/holder of the contended resource) is
reported to the user. Often this information has proven to be
insufficient to assist debugging efforts.
To avoid loss of useful debug information, for architectures which
support NMI, this patch makes it possible to improve soft lockup
reporting. This is accomplished by issuing an NMI to each cpu to obtain
a stack trace.
If NMI is not supported we just revert back to the old method. A sysctl
and boot-time parameter is available to toggle this feature.
[dzickus@redhat.com: add CONFIG_SMP in certain areas]
[akpm@linux-foundation.org: additional CONFIG_SMP=n optimisations]
[mq@suse.cz: fix warning]
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jan Moskyto Matejka <mq@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Wu noticed the following splat on his machine when updating
/proc/sys/kernel/watchdog_thresh:
BUG: sleeping function called from invalid context at mm/slub.c:965
in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: init
3 locks held by init/1:
#0: (sb_writers#3){.+.+.+}, at: [<ffffffff8117b663>] vfs_write+0x143/0x180
#1: (watchdog_proc_mutex){+.+.+.}, at: [<ffffffff810e02d3>] proc_dowatchdog+0x33/0x110
#2: (cpu_hotplug.lock){.+.+.+}, at: [<ffffffff810589c2>] get_online_cpus+0x32/0x80
Preemption disabled at:[<ffffffff810e0384>] proc_dowatchdog+0xe4/0x110
CPU: 0 PID: 1 Comm: init Not tainted 3.16.0-rc1-testing #34
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0x4e/0x7a
__might_sleep+0x11d/0x190
kmem_cache_alloc_trace+0x4e/0x1e0
perf_event_alloc+0x55/0x440
perf_event_create_kernel_counter+0x26/0xe0
watchdog_nmi_enable+0x75/0x140
update_timers_all_cpus+0x53/0xa0
proc_dowatchdog+0xe4/0x110
proc_sys_call_handler+0xb3/0xc0
proc_sys_write+0x14/0x20
vfs_write+0xad/0x180
SyS_write+0x49/0xb0
system_call_fastpath+0x16/0x1b
NMI watchdog: disabled (cpu0): hardware events not enabled
What happened is after updating the watchdog_thresh, the lockup detector
is restarted to utilize the new value. Part of this process involved
disabling preemption. Once preemption was disabled, perf tried to
allocate a new event (as part of the restart). This caused the above
BUG_ON as you can't sleep with preemption disabled.
The preemption restriction seemed agressive as we are not doing anything
on that particular cpu, but with all the online cpus (which are
protected by the get_online_cpus lock). Remove the restriction and the
BUG_ON goes away.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Peter Wu <peter@lekensteyn.nl>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org> [3.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix:
BUG: using __this_cpu_write() in preemptible [00000000] code: systemd-udevd/497
caller is __this_cpu_preempt_check+0x13/0x20
CPU: 3 PID: 497 Comm: systemd-udevd Tainted: G W 3.15.0-rc1 #9
Hardware name: Hewlett-Packard HP EliteBook 8470p/179B, BIOS 68ICF Ver. F.02 04/27/2012
Call Trace:
check_preemption_disabled+0xe1/0xf0
__this_cpu_preempt_check+0x13/0x20
touch_nmi_watchdog+0x28/0x40
Reported-by: Luis Henriques <luis.henriques@canonical.com>
Tested-by: Luis Henriques <luis.henriques@canonical.com>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Lv Zheng <lv.zheng@intel.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I ran into a scenario where while one cpu was stuck and should have
panic'd because of the NMI watchdog, it didn't. The reason was another
cpu was spewing stack dumps on to the console. Upon investigation, I
noticed that when writing to the console and also when dumping the
stack, the watchdog is touched.
This causes all the cpus to reset their NMI watchdog flags and the
'stuck' cpu just spins forever.
This change causes the semantics of touch_nmi_watchdog to be changed
slightly. Previously, I accidentally changed the semantics and we
noticed there was a codepath in which touch_nmi_watchdog could be
touched from a preemtible area. That caused a BUG() to happen when
CONFIG_DEBUG_PREEMPT was enabled. I believe it was the acpi code.
My attempt here re-introduces the change to have the
touch_nmi_watchdog() code only touch the local cpu instead of all of the
cpus. But instead of using __get_cpu_var(), I use the
__raw_get_cpu_var() version.
This avoids the preemption problem. However my reasoning wasn't because
I was trying to be lazy. Instead I rationalized it as, well if
preemption is enabled then interrupts should be enabled to and the NMI
watchdog will have no reason to trigger. So it won't matter if the
wrong cpu is touched because the percpu interrupt counters the NMI
watchdog uses should still be incrementing.
Don said:
: I'm ok with this patch, though it does alter the behaviour of how
: touch_nmi_watchdog works. For the most part I don't think most callers
: need to touch all of the watchdogs (on each cpu). Perhaps a corner case
: will pop up (the scheduler?? to mimic touch_all_softlockup_watchdogs() ).
:
: But this does address an issue where if a system is locked up and one cpu
: is spewing out useful debug messages (or error messages), the hard lockup
: will fail to go off. We have seen this on RHEL also.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order to remotely restart the watchdog hrtimer, update_timers()
allocates a csd on the stack and pass it to __smp_call_function_single().
There is no partcular need, however, for a specific csd here. Lets
simplify that a little by calling smp_call_function_single()
which can already take care of the csd allocation by itself.
Acked-by: Don Zickus <dzickus@redhat.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@fb.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
watchdog_tresh controls how often nmi perf event counter checks per-cpu
hrtimer_interrupts counter and blows up if the counter hasn't changed
since the last check. The counter is updated by per-cpu
watchdog_hrtimer hrtimer which is scheduled with 2/5 watchdog_thresh
period which guarantees that hrtimer is scheduled 2 times per the main
period. Both hrtimer and perf event are started together when the
watchdog is enabled.
So far so good. But...
But what happens when watchdog_thresh is updated from sysctl handler?
proc_dowatchdog will set a new sampling period and hrtimer callback
(watchdog_timer_fn) will use the new value in the next round. The
problem, however, is that nobody tells the perf event that the sampling
period has changed so it is ticking with the period configured when it
has been set up.
This might result in an ear ripping dissonance between perf and hrtimer
parts if the watchdog_thresh is increased. And even worse it might lead
to KABOOM if the watchdog is configured to panic on such a spurious
lockup.
This patch fixes the issue by updating both nmi perf even counter and
hrtimers if the threshold value has changed.
The nmi one is disabled and then reinitialized from scratch. This has
an unpleasant side effect that the allocation of the new event might
fail theoretically so the hard lockup detector would be disabled for
such cpus. On the other hand such a memory allocation failure is very
unlikely because the original event is deallocated right before.
It would be much nicer if we just changed perf event period but there
doesn't seem to be any API to do that right now. It is also unfortunate
that perf_event_alloc uses GFP_KERNEL allocation unconditionally so we
cannot use on_each_cpu() and do the same thing from the per-cpu context.
The update from the current CPU should be safe because
perf_event_disable removes the event atomically before it clears the
per-cpu watchdog_ev so it cannot change anything under running handler
feet.
The hrtimer is simply restarted (thanks to Don Zickus who has pointed
this out) if it is queued because we cannot rely it will fire&adopt to
the new sampling period before a new nmi event triggers (when the
treshold is decreased).
[akpm@linux-foundation.org: the UP version of __smp_call_function_single ended up in the wrong place]
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
proc_dowatchdog doesn't synchronize multiple callers which might lead to
confusion when two parallel callers might confuse watchdog_enable_all_cpus
resp watchdog_disable_all_cpus (eg watchdog gets enabled even if
watchdog_thresh was set to 0 already).
This patch adds a local mutex which synchronizes callers to the sysctl
handler.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A perf event can be used without forcing the tick to
stay alive if it doesn't use a frequency but a sample
period and if it doesn't throttle (raise storm of events).
Since the lockup detector neither use a perf event frequency
nor should ever throttle due to its high period, it can now
run concurrently with the full dynticks feature.
So remove the hack that disabled the watchdog.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Anish Singh <anish198519851985@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-9-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When the watchdog runs, it prevents the full dynticks
CPUs from stopping their tick because the hard lockup
detector uses perf events internally, which in turn
rely on the periodic tick.
Since this is a rather confusing behaviour that is not
easy to track down and identify for those who want to
test CONFIG_NO_HZ_FULL, let's default disable the
watchdog on boot time when full dynticks is enabled.
The user can still enable it later on runtime using
proc or sysctl.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Anish Singh <anish198519851985@gmail.com>
We have two very conflicting state variable names in the
watchdog:
* watchdog_enabled: This one reflects the user interface. It's
set to 1 by default and can be overriden with boot options
or sysctl/procfs interface.
* watchdog_disabled: This is the internal toggle state that
tells if watchdog threads, timers and NMI events are currently
running or not. This state mostly depends on the user settings.
It's a convenient state latch.
Now we really need to find clearer names because those
are just too confusing to encourage deep review.
watchdog_enabled now becomes watchdog_user_enabled to reflect
its purpose as an interface.
watchdog_disabled becomes watchdog_running to suggest its
role as a pure internal state.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Anish Singh <anish198519851985@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Don Zickus <dzickus@redhat.com>
The user activation/deactivation of the watchdog through boot parameters
or systcl is currently implemented with a dance involving kthreads parking
and unparking methods: the threads are unconditionally registered on
boot and they park as soon as the user want the watchdog to be disabled.
This method involves a few noisy details to handle though: the watchdog
kthreads may be unparked anytime due to hotplug operations, after which
the watchdog internals have to decide to park again if it is user-disabled.
As a result the setup() and unpark() methods need to be able to request a
reparking. This is not currently supported in the kthread infrastructure
so this piece of the watchdog code only works halfway.
Besides, unparking/reparking the watchdog kthreads consume unnecessary
cputime on hotplug operations when those could be simply ignored in the
first place.
As suggested by Srivatsa, let's instead only register the watchdog
threads when they are needed. This way we don't need to think about
hotplug operations and we don't burden the CPU onlining when the watchdog
is simply disabled.
Suggested-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Anish Singh <anish198519851985@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Don Zickus <dzickus@redhat.com>
The watchdog_disabled flag is a bit cryptic. However it's
usefulness is multifold. Uses are:
1. Check if smpboot_register_percpu_thread function passed.
2. Makes sure that user enables and disables the watchdog in
sequence i.e. enable watchdog->disable watchdog->enable watchdog
Unlike enable watchdog->enable watchdog which is wrong.
Signed-off-by: anish kumar <anish198519851985@gmail.com>
[small text cleanups]
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: chuansheng.liu@intel.com
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1363113848-18344-1-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull core locking changes from Ingo Molnar:
"The biggest change is the rwsem lock-steal improvements, both to the
assembly optimized and the spinlock based variants.
The other notable change is the clean up of the seqlock implementation
to be based on the seqcount infrastructure.
The rest is assorted smaller debuggability, cleanup and continued -rt
locking changes."
* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rwsem-spinlock: Implement writer lock-stealing for better scalability
futex: Revert "futex: Mark get_robust_list as deprecated"
generic: Use raw local irq variant for generic cmpxchg
lockdep: Selftest: convert spinlock to raw spinlock
seqlock: Use seqcount infrastructure
seqlock: Remove unused functions
ntp: Make ntp_lock raw
intel_idle: Convert i7300_idle_lock to raw_spinlock
locking: Various static lock initializer fixes
lockdep: Print more info when MAX_LOCK_DEPTH is exceeded
rwsem: Implement writer lock-stealing for better scalability
lockdep: Silence warning if CONFIG_LOCKDEP isn't set
watchdog: Use local_clock for get_timestamp()
lockdep: Rename print_unlock_inbalance_bug() to print_unlock_imbalance_bug()
locking/stat: Fix a typo
The get_timestamp() function is always called with current cpu,
thus using local_clock() would be more appropriate and it makes
the code shorter and cleaner IMHO.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1356576585-28782-1-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move rt scheduler definitions out of include/linux/sched.h into
new file include/linux/sched/rt.h
Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20130207094707.7b9f825f@riff.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 8d4516904b ("watchdog: Fix CPU hotplug regression") causes an
oops or hard lockup when doing
echo 0 > /proc/sys/kernel/nmi_watchdog
echo 1 > /proc/sys/kernel/nmi_watchdog
and the kernel is booted with nmi_watchdog=1 (default)
Running laptop-mode-tools and disconnecting/connecting AC power will
cause this to trigger, making it a common failure scenario on laptops.
Instead of bailing out of watchdog_disable() when !watchdog_enabled we
can initialize the hrtimer regardless of watchdog_enabled status. This
makes it safe to call watchdog_disable() in the nmi_watchdog=0 case,
without the negative effect on the enabled => disabled => enabled case.
All these tests pass with this patch:
- nmi_watchdog=1
echo 0 > /proc/sys/kernel/nmi_watchdog
echo 1 > /proc/sys/kernel/nmi_watchdog
- nmi_watchdog=0
echo 0 > /sys/devices/system/cpu/cpu1/online
- nmi_watchdog=0
echo mem > /sys/power/state
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51661
Cc: <stable@vger.kernel.org> # v3.7
Cc: Norbert Warmuth <nwarmuth@t-online.de>
Cc: Joseph Salisbury <joseph.salisbury@canonical.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently getting the sample period is always thru a complex
calculation: get_softlockup_thresh() * ((u64)NSEC_PER_SEC / 5).
We can store the sample period as a variable, and set it as __read_mostly
type.
Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Cc: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Norbert reported:
"3.7-rc6 booted with nmi_watchdog=0 fails to suspend to RAM or
offline CPUs. It's reproducable with a KVM guest and physical
system."
The reason is that commit bcd951cf(watchdog: Use hotplug thread
infrastructure) missed to take this into account. So the cpu offline
code gets stuck in the teardown function because it accesses non
initialized data structures.
Add a check for watchdog_enabled into that path to cure the issue.
Reported-and-tested-by: Norbert Warmuth <nwarmuth@t-online.de>
Tested-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1211231033230.2701@ionos
Link: http://bugs.launchpad.net/bugs/1079534
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In get_sample_period(), unsigned long is not enough:
watchdog_thresh * 2 * (NSEC_PER_SEC / 5)
case1:
watchdog_thresh is 10 by default, the sample value will be: 0xEE6B2800
case2:
set watchdog_thresh is 20, the sample value will be: 0x1 DCD6 5000
In case2, we need use u64 to express the sample period. Otherwise,
changing the threshold thru proc often can not be successful.
Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20120716103948.563736676@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Revert commit 45226e9 (NMI watchdog: fix for lockup detector breakage
on resume) which breaks resume from system suspend on my SH7372
Mackerel board (by causing a NULL pointer dereference to happen) and
is generally wrong, because it abuses the CPU hotplug functionality
in a shamelessly blatant way.
The original issue should be addressed through appropriate syscore
resume callback instead.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
On the suspend/resume path the boot CPU does not go though an
offline->online transition. This breaks the NMI detector post-resume
since it depends on PMU state that is lost when the system gets
suspended.
Fix this by forcing a CPU offline->online transition for the lockup
detector on the boot CPU during resume.
To provide more context, we enable NMI watchdog on Chrome OS. We have
seen several reports of systems freezing up completely which indicated
that the NMI watchdog was not firing for some reason.
Debugging further, we found a simple way of repro'ing system freezes --
issuing the command 'tasket 1 sh -c "echo nmilockup > /proc/breakme"'
after the system has been suspended/resumed one or more times.
With this patch in place, the system freeze result in panics, as
expected.
These panics provide a nice stack trace for us to debug the actual issue
causing the freeze.
[akpm@linux-foundation.org: fiddle with code comment]
[akpm@linux-foundation.org: make lockup_detector_bootcpu_resume() conditional on CONFIG_SUSPEND]
[akpm@linux-foundation.org: fix section errors]
Signed-off-by: Sameer Nanda <snanda@chromium.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Mandeep Singh Baines <msb@chromium.org>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A bunch of bugzillas have complained how noisy the nmi_watchdog
is during boot-up especially with its expected failure cases
(like virt and bios resource contention).
This is my attempt to quiet them down and keep it less confusing
for the end user. What I did is print the message for cpu0 and
save it for future comparisons. If future cpus have an
identical message as cpu0, then don't print the redundant info.
However, if a future cpu has a different message, happily print
that loudly.
Before the change, you would see something like:
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
NMI watchdog enabled, takes one hw-pmu counter.
#2
NMI watchdog enabled, takes one hw-pmu counter.
#3 Ok.
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 4 CPUs
Total of 4 processors activated (22607.24 BogoMIPS).
After the change, it is simplified to:
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1#2#3 Ok.
Brought up 4 CPUs
V2: little changes based on Joe Perches' feedback
V3: printk cleanup based on Ingo's feedback; checkpatch fix
V4: keep printk as one long line
V5: Ingo fix ups
Reported-and-tested-by: Nathan Zimmer <nzimmer@sgi.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: nzimmer@sgi.com
Cc: joe@perches.com
Link: http://lkml.kernel.org/r/1339594548-17227-1-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A suspended VM can cause spurious soft lockup warnings. To avoid these, the
watchdog now checks if the kernel knows it was stopped by the host and skips
the warning if so. When the watchdog is reset successfully, clear the guest
paused flag.
Signed-off-by: Eric B Munson <emunson@mgebm.net>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
It fixes some 80-col wordwrappings and adds some consistency.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the system is loaded while hotplugging a CPU we might end up with a
bogus hardlockup detection. This has been seen during LTP pounder test
executed in parallel with hotplug test.
The main problem is that enable_watchdog (called when CPU is brought up)
registers perf event which periodically checks per-cpu counter
(hrtimer_interrupts), updated from a hrtimer callback, but the hrtimer
is fired from the kernel thread.
This means that while we already do check for the hard lockup the kernel
thread might be sitting on the runqueue with zillions of tasks so there
is nobody to update the value we rely on and so we KABOOM.
Let's fix this by boosting the watchdog thread priority before we wake
it up rather than when it's already running. This still doesn't handle
a case where we have the same amount of high prio FIFO tasks but that
doesn't seem to be common. The current implementation doesn't handle
that case anyway so this is not worse at least.
Unfortunately, we cannot start perf counter from the watchdog thread
because we could miss a real lock up and also we cannot start the
hrtimer watchdog_enable because we there is no way (at least I don't
know any) to start a hrtimer from a different CPU.
[dzickus@redhat.com: fix compile issue with param]
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reflect the change in the soft and hard lockup thresholds and
their relation to the frequency of the hrtimer and NMI events in
the code comments. While at it, remove references to files that
do not exist anymore.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/r/1328827342-6253-3-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
rsyslog will display KERN_EMERG messages on a connected
terminal. However, these messages are useless/undecipherable
for a general user.
For example, after a softlockup we get:
Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
kernel:Stack:
Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
kernel:Call Trace:
Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
kernel:Code: ff ff a8 08 75 25 31 d2 48 8d 86 38 e0 ff ff 48 89
d1 0f 01 c8 0f ae f0 48 8b 86 38 e0 ff ff a8 08 75 08 b1 01 4c 89 e0 0f 01 c9 <e8> ea 69 dd ff 4c 29 e8 48 89 c7 e8 0f bc da ff 49 89 c4 49 89
This happens because the printk levels for these messages are
incorrect. Only an informational message should be displayed on
a terminal.
I modified the printk levels for various messages in the kernel
and tested the output by using the drivers/misc/lkdtm.c kernel
modules (ie, softlockups, panics, hard lockups, etc.) and
confirmed that the console output was still the same and that
the output to the terminals was correct.
For example, in the case of a softlockup we now see the much
more informative:
Message from syslogd@intel-s3e37-04 at Jan 25 10:18:06 ...
BUG: soft lockup - CPU4 stuck for 60s!
instead of the above confusing messages.
AFAICT, the messages no longer have to be KERN_EMERG. In the
most important case of a panic we set console_verbose(). As for
the other less severe cases the correct data is output to the
console and /var/log/messages.
Successfully tested by me using the drivers/misc/lkdtm.c module.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: dzickus@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1327586134-11926-1-git-send-email-prarit@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix compilation warnings for CONFIG_SYSCTL=n:
fixed compilation warnings in case of disabled CONFIG_SYSCTL
kernel/watchdog.c:483:13: warning: `watchdog_enable_all_cpus' defined but not used
kernel/watchdog.c:500:13: warning: `watchdog_disable_all_cpus' defined but not used
these functions are static and are used only in sysctl handler, so move
them inside #ifdef CONFIG_SYSCTL too
Signed-off-by: Vasily Averin <vvs@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the watchdog thread exits it runs through the exit path with FIFO
priority. There is no point in doing so. Switch back to SCHED_NORMAL
before exiting.
Cc: Don Zickus <dzickus@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1109121337461.2723@ionos
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Watchdog kthreads can use kthread_create_on_node() to NUMA affine their
stack and task_struct.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1312394344-18815-1-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Instead of hw_nmi_watchdog_set_attr() weak function
and appropriate x86_pmu::hw_watchdog_set_attr() call
we introduce even alias mechanism which allow us
to drop this routines completely and isolate quirks
of Netburst architecture inside P4 PMU code only.
The main idea remains the same though -- to allow
nmi-watchdog and perf top run simultaneously.
Note the aliasing mechanism applies to generic
PERF_COUNT_HW_CPU_CYCLES event only because arbitrary
event (say passed as RAW initially) might have some
additional bits set inside ESCR register changing
the behaviour of event and we can't guarantee anymore
that alias event will give the same result.
P.S. Thanks a huge to Don and Steven for for testing
and early review.
Acked-by: Don Zickus <dzickus@redhat.com>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
CC: Ingo Molnar <mingo@elte.hu>
CC: Peter Zijlstra <a.p.zijlstra@chello.nl>
CC: Stephane Eranian <eranian@google.com>
CC: Lin Ming <ming.m.lin@intel.com>
CC: Arnaldo Carvalho de Melo <acme@redhat.com>
CC: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20110708201712.GS23657@sun
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The perf_event overflow handler does not receive any caller-derived
argument, so many callers need to resort to looking up the perf_event
in their local data structure. This is ugly and doesn't scale if a
single callback services many perf_events.
Fix by adding a context parameter to perf_event_create_kernel_counter()
(and derived hardware breakpoints APIs) and storing it in the perf_event.
The field can be accessed from the callback as event->overflow_handler_context.
All callers are updated.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1309362157-6596-2-git-send-email-avi@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The nmi parameter indicated if we could do wakeups from the current
context, if not, we would set some state and self-IPI and let the
resulting interrupt do the wakeup.
For the various event classes:
- hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from
the PMI-tail (ARM etc.)
- tracepoint: nmi=0; since tracepoint could be from NMI context.
- software: nmi=[0,1]; some, like the schedule thing cannot
perform wakeups, and hence need 0.
As one can see, there is very little nmi=1 usage, and the down-side of
not using it is that on some platforms some software events can have a
jiffy delay in wakeup (when arch_irq_work_raise isn't implemented).
The up-side however is that we can remove the nmi parameter and save a
bunch of conditionals in fast paths.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/n/tip-agjev8eu666tvknpb3iaj0fg@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Due to restriction and specifics of Netburst PMU we need a separated
event for NMI watchdog. In particular every Netburst event
consumes not just a counter and a config register, but also an
additional ESCR register.
Since ESCR registers are grouped upon counters (i.e. if ESCR is occupied
for some event there is no room for another event to enter until its
released) we need to pick up the "least" used ESCR (or the most available
one) for nmi-watchdog purposes -- so MSR_P4_CRU_ESCR2/3 was chosen.
With this patch nmi-watchdog and perf top should be able to run simultaneously.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
CC: Lin Ming <ming.m.lin@intel.com>
CC: Arnaldo Carvalho de Melo <acme@redhat.com>
CC: Frederic Weisbecker <fweisbec@gmail.com>
Tested-and-reviewed-by: Don Zickus <dzickus@redhat.com>
Tested-and-reviewed-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110623124918.GC13050@sun
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This build warning slipped through:
kernel/watchdog.c:102: warning: function declaration isn't a prototype
As reported by Stephen Rothwell.
Also address an unused variable warning that GCC 4.6.0 reports:
we cannot do anything about failed watchdog ops during CPU hotplug
(it's not serious enough to return an error from the notifier),
so ignore them.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mandeep Singh Baines <msb@chromium.org>
Cc: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20110524134129.8da27016.sfr@canb.auug.org.au
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20110517071642.GF22305@elte.hu>
Before the conversion of the NMI watchdog to perf event, the
watchdog timeout was 5 seconds. Now it is 60 seconds. For my
particular application, netbooks, 5 seconds was a better
timeout. With a short timeout, we catch faults earlier and are
able to send back a panic. With a 60 second timeout, the user is
unlikely to wait and will instead hit the power button, causing
us to lose the panic info.
This change configures the NMI period to watchdog_thresh and
sets the softlockup_thresh to watchdog_thresh * 2. In addition,
watchdog_thresh was reduced to 10 seconds as suggested by Ingo
Molnar.
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1306127423-3347-4-git-send-email-msb@chromium.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20110517071642.GF22305@elte.hu>
This restores the previous behavior of softlock_thresh.
Currently, setting watchdog_thresh to zero causes the watchdog
kthreads to consume a lot of CPU.
In addition, the logic of proc_dowatchdog_thresh and
proc_dowatchdog_enabled has been factored into proc_dowatchdog.
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1306127423-3347-3-git-send-email-msb@chromium.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20110517071018.GE22305@elte.hu>
Don't take any action on an unsuccessful write to /proc.
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1306127423-3347-2-git-send-email-msb@chromium.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In get_sample_period(), softlockup_thresh is integer divided by
5 before the multiplication by NSEC_PER_SEC. This results in
softlockup_thresh being rounded down to the nearest integer
multiple of 5.
For example, a softlockup_thresh of 4 rounds down to 0.
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1306127423-3347-1-git-send-email-msb@chromium.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In corner cases where softlockup watchdog is not setup successfully, the
relevant nmi perf event for hardlockup watchdog could be disabled, then
the status of the underlying hardware remains unchanged.
Also, if the kthread doesn't start then the hrtimer won't run and the
hardlockup detector will falsely fire.
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch addresses a couple of problems. One was the case when the
hardlockup failed to start, it also failed to start the softlockup. There
were valid cases when the hardlockup shouldn't start and that shouldn't
block the softlockup (no lapic, bios controls perf counters).
The second problem was when the hardlockup failed to start on boxes (from
a no lapic or bios controlled perf counter case), it reported failure to
the cpu notifier chain. This blocked the notifier from continuing to
start other more critical pieces of cpu bring-up (in our case based on a
2.6.32 fork, it was the mce). As a result, during soft cpu online/offline
testing, the system would panic when a cpu was offlined because the cpu
notifier would succeed in processing a watchdog disable cpu event and
would panic in the mce case as a result of un-initialized variables from a
never executed cpu up event.
I realized the hardlockup/softlockup cases are really just debugging aids
and should never impede the progress of a cpu up/down event. Therefore I
modified the code to always return NOTIFY_OK and instead rely on printks
to inform the user of problems.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a cpu is considered stuck, instead of limping along and just printing
a warning, it is sometimes preferred to just panic, let kdump capture the
vmcore and reboot. This gets the machine back into a stable state quickly
while saving the info that got it into a stuck state to begin with.
Add a Kconfig option to allow users to set the hardlockup to panic
by default. Also add in a 'nmi_watchdog=nopanic' to override this.
[akpm@linux-foundation.org: fix strncmp length]
Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During boot if the hardlockup detector fails to initialize, it
complains very loudly. Some failures should be expected under
certain situations, ie no lapics, or resource in-use. Tone
those error messages down a bit. Keep the rest at a high level.
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Tested-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1297278153-21111-1-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If it was not possible to enable watchdog for any cpu, switch
watchdog_enabled back to 0, because it's visible via
kernel.watchdog sysctl.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <stable@kernel.org>
LKML-Reference: <1296230433-6261-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Passing nowatchdog to kernel disables 2 things: creation of
watchdog threads AND initialization of percpu watchdog_hrtimer.
As hrtimers are initialized only at boot it's not possible to
enable watchdog later - for me all watchdog threads started to
eat 100% of CPU time, but they could just crash.
Additionally, even if these threads would start properly,
watchdog_disable_all_cpus was guarded by no_watchdog check, so
you couldn't disable watchdog.
To fix this, remove no_watchdog variable and use already
existing watchdog_enabled variable.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
[ removed another no_watchdog instance ]
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <stable@kernel.org>
LKML-Reference: <1296230433-6261-1-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (30 commits)
gameport: use this_cpu_read instead of lookup
x86: udelay: Use this_cpu_read to avoid address calculation
x86: Use this_cpu_inc_return for nmi counter
x86: Replace uses of current_cpu_data with this_cpu ops
x86: Use this_cpu_ops to optimize code
vmstat: User per cpu atomics to avoid interrupt disable / enable
irq_work: Use per cpu atomics instead of regular atomics
cpuops: Use cmpxchg for xchg to avoid lock semantics
x86: this_cpu_cmpxchg and this_cpu_xchg operations
percpu: Generic this_cpu_cmpxchg() and this_cpu_xchg support
percpu,x86: relocate this_cpu_add_return() and friends
connector: Use this_cpu operations
xen: Use this_cpu_inc_return
taskstats: Use this_cpu_ops
random: Use this_cpu_inc_return
fs: Use this_cpu_inc_return in buffer.c
highmem: Use this_cpu_xx_return() operations
vmstat: Use this_cpu_inc_return for vm statistics
x86: Support for this_cpu_add, sub, dec, inc_return
percpu: Generic support for this_cpu_add, sub, dec, inc_return
...
Fixed up conflicts: in arch/x86/kernel/{apic/nmi.c, apic/x2apic_uv_x.c, process.c}
as per Tejun.
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits)
sched: Change wait_for_completion_*_timeout() to return a signed long
sched, autogroup: Fix reference leak
sched, autogroup: Fix potential access to freed memory
sched: Remove redundant CONFIG_CGROUP_SCHED ifdef
sched: Fix interactivity bug by charging unaccounted run-time on entity re-weight
sched: Move periodic share updates to entity_tick()
printk: Use this_cpu_{read|write} api on printk_pending
sched: Make pushable_tasks CONFIG_SMP dependant
sched: Add 'autogroup' scheduling feature: automated per session task groups
sched: Fix unregister_fair_sched_group()
sched: Remove unused argument dest_cpu to migrate_task()
mutexes, sched: Introduce arch_mutex_cpu_relax()
sched: Add some clock info to sched_debug
cpu: Remove incorrect BUG_ON
cpu: Remove unused variable
sched: Fix UP build breakage
sched: Make task dump print all 15 chars of proc comm
sched: Update tg->shares after cpu.shares write
sched: Allow update_cfs_load() to update global load
sched: Implement demand based update_cfs_load()
...
The error message 'NMI watchdog failed to create perf event...'
does not make it clear that this is a fatal error for the
watchdog. It also currently prints the error value as a
pointer, rather than extracting the error code with PTR_ERR().
Fix that.
Add a note to the description of the 'nowatchdog' kernel
parameter to associate it with this message.
Reported-by: Cesare Leonardi <celeonar@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: 599368@bugs.debian.org
Cc: 608138@bugs.debian.org
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <stable@kernel.org> # .37.x and later
LKML-Reference: <1294009362.3167.126.camel@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
__get_cpu_var() can be replaced with this_cpu_read and will then use a
single read instruction with implied address calculation to access the
correct per cpu instance.
However, the address of a per cpu variable passed to __this_cpu_read()
cannot be determined (since it's an implied address conversion through
segment prefixes). Therefore apply this only to uses of __get_cpu_var
where the address of the variable is not used.
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Hugh Dickins <hughd@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Originally adapted from Huang Ying's patch which moved the
unknown_nmi_panic to the traps.c file. Because the old nmi
watchdog was deleted before this change happened, the
unknown_nmi_panic sysctl was lost. This re-adds it.
Also, the nmi_watchdog sysctl was re-implemented and its
documentation updated accordingly.
Patch-inspired-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: fweisbec@gmail.com
LKML-Reference: <1291068437-5331-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The perf hardware pmu got initialized at various points in the boot,
some before early_initcall() some after (notably arch_initcall).
The problem is that the NMI lockup detector is ran from early_initcall()
and expects the hardware pmu to be present.
Sanitize this by moving all architecture hardware pmu implementations to
initialize at early_initcall() and move the lockup detector to an explicit
initcall right after that.
Cc: paulus <paulus@samba.org>
Cc: davem <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290707759.2145.119.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Commit d9ca07a05c ("watchdog: Avoid kernel crash when disabling
watchdog") introduces a section mismatch.
Now that we reference no_watchdog from non-__init code it can no longer
be __initdata.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton pointed out almost all sched_setscheduler() callers are
using fixed parameters and can be converted to static. It reduces runtime
memory use a little.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: James Morris <jmorris@namei.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The kernel perf event creation path shouldn't use find_task_by_vpid()
because a vpid exists in a specific namespace. find_task_by_vpid() uses
current's pid namespace which isn't always the correct namespace to use
for the vpid in all the places perf_event_create_kernel_counter() (and
thus find_get_context()) is called.
The goal is to clean up pid namespace handling and prevent bugs like:
https://bugzilla.kernel.org/show_bug.cgi?id=17281
Instead of using pids switch find_get_context() to use task struct
pointers directly. The syscall is responsible for resolving the pid to
a task struct. This moves the pid namespace resolution into the syscall
much like every other syscall that takes pid parameters.
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robin Green <greenrd@greenrd.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
LKML-Reference: <a134e5e392ab0204961fd1a62c84a222bf5874a9.1284407763.git.matthltc@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In case you boot with the watchdog disabled, i.e., nowatchdog, then,
if you try to disable it via /proc/sys/kernel/watchdog, you get
a kernel crash. The reason is that you are trying to cancel a hrtimer
which has never been initialized.
This patch fixes this by skipping execution of
watchdog_disable_all_cpus() when the watchdog is marked
disabled from boot.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4c8f7a23.cae9d80a.2c11.0bb4@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
During my rewrite, the semantics of touch_nmi_watchdog and
touch_softlockup_watchdog changed enough to break some drivers
(mostly over preemptable regions).
These are cases where long delays on one CPU (due to
print_delay for example) can cause long delays on other
CPUs - so we must 'touch' the nmi_watchdog flag of those
other CPUs as well.
This change brings those touch_*_watchdog() functions back in line
with to how they used to work.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: peterz@infradead.org
Cc: fweisbec@gmail.com
LKML-Reference: <1283310009-22168-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The panic notifer in lockup_detector just set did_panic to 1.
But did_panic is not used anywhere so we can just remove it.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: peterz@infradead.org
Cc: gorcunov@gmail.com
Cc: fweisbec@gmail.com
LKML-Reference: <1283310009-22168-4-git-send-email-dzickus@redhat.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
By the commit e6bde73b07
("cpu-hotplug: return better errno on cpu hotplug failure"),
the cpu notifier can return encapsulate errno value, resulting
in more meaningful error codes for CPU hotplug failures.
This converts the cpu notifier to return encapsulate errno value
for the lockup_detector as well.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: peterz@infradead.org
Cc: gorcunov@gmail.com
Cc: fweisbec@gmail.com
LKML-Reference: <1283310009-22168-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Stephane reported that when the machine locks up, the regular ticks,
which are responsible to resetting the throttle count, stop too.
Hence the NMI watchdog can end up being throttled before it reports on
the locked up state, and we end up being sad..
Cure this by having the watchdog overflow reset its own throttle count.
Reported-by: Stephane Eranian <eranian@google.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1282215916.1926.4696.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
watchdog_overflow_callback() is only used in kernel/watchdog.c.
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Don Zickus <dzickus@redhat.com>
LKML-Reference: <1282273431.16443.32.camel@minggr.sh.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Variable on the stack is not initialized to zero, do it
explicitly.
This bug was found by a compiler warning:
kernel/watchdog.c:463: warning: 'result' may be used uninitialized in this function
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1278316854-28442-1-git-send-email-segooon@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Just a bunch of conversions as suggested by Frederic W.
__get_cpu_var() provides preemption disabled checks.
Plus it gives more readability as it makes it obvious
we are dealing locally now with these vars.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
LKML-Reference: <1274133966-18415-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Combining the softlockup and hardlockup code causes watchdog.c
to build even without the hardlockup detection support.
So if an arch, that has the previous and the new nmi watchdog
implementations cohabiting, wants to know if the generic one
is in use, CONFIG_LOCKUP_DETECTOR is not a reliable check.
We need to use CONFIG_HARDLOCKUP_DETECTOR instead.
Fixes:
kernel/built-in.o: In function `touch_nmi_watchdog':
(.text+0x449bc): multiple definition of `touch_nmi_watchdog'
arch/sparc/kernel/built-in.o:(.text+0x11b28): first defined here
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
LKML-Reference: <20100514151121.GR15159@redhat.com>
[ use CONFIG_HARDLOCKUP_DETECTOR instead of CONFIG_PERF_EVENTS_NMI]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
This new config is deemed to simplify even more the lockup detector
dependencies and can make it easier to bring a smooth sorting
between archs that support the new generic lockup detector and those
that still have their own, especially for those that are in the
middle of this migration.
Instead of checking whether we have CONFIG_LOCKUP_DETECTOR +
CONFIG_PERF_EVENTS_NMI each time an arch wants to know if it needs
to build its own lockup detector, take a shortcut with this new
config. It is enabled only if the hardlockup detection part of
the whole lockup detector is on.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
When I combined the nmi_watchdog (hardlockup) and softlockup code, I
also combined the paths the touch_watchdog and touch_nmi_watchdog took.
This may not be the best idea as pointed out by Frederic W., that the
touch_watchdog case probably should not reset the hardlockup count.
Therefore the patch below falls back to the previous idea of keeping
the touch_nmi_watchdog a superset of the touch_watchdog case.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <1273266711-18706-9-git-send-email-dzickus@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Just some code cleanup to make touch_softlockup clearer and remove the
softlockup_tick function as it is no longer needed.
Also remove the /proc softlockup_thres call as it has been changed to
watchdog_thres.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <1273266711-18706-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The new nmi_watchdog (which uses the perf event subsystem) is very
similar in structure to the softlockup detector. Using Ingo's
suggestion, I combined the two functionalities into one file:
kernel/watchdog.c.
Now both the nmi_watchdog (or hardlockup detector) and softlockup
detector sit on top of the perf event subsystem, which is run every
60 seconds or so to see if there are any lockups.
To detect hardlockups, cpus not responding to interrupts, I
implemented an hrtimer that runs 5 times for every perf event
overflow event. If that stops counting on a cpu, then the cpu is
most likely in trouble.
To detect softlockups, tasks not yielding to the scheduler, I used the
previous kthread idea that now gets kicked every time the hrtimer fires.
If the kthread isn't being scheduled neither is anyone else and the
warning is printed to the console.
I tested this on x86_64 and both the softlockup and hardlockup paths
work.
V2:
- cleaned up the Kconfig and softlockup combination
- surrounded hardlockup cases with #ifdef CONFIG_PERF_EVENTS_NMI
- seperated out the softlockup case from perf event subsystem
- re-arranged the enabling/disabling nmi watchdog from proc space
- added cpumasks for hardlockup failure cases
- removed fallback to soft events if no PMU exists for hard events
V3:
- comment cleanups
- drop support for older softlockup code
- per_cpu cleanups
- completely remove software clock base hardlockup detector
- use per_cpu masking on hard/soft lockup detection
- #ifdef cleanups
- rename config option NMI_WATCHDOG to LOCKUP_DETECTOR
- documentation additions
V4:
- documentation fixes
- convert per_cpu to __get_cpu_var
- powerpc compile fixes
V5:
- split apart warn flags for hard and soft lockups
TODO:
- figure out how to make an arch-agnostic clock2cycles call
(if possible) to feed into perf events as a sample period
[fweisbec: merged conflict patch]
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <1273266711-18706-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cyril Bur