Commit Graph

21 Commits

Author SHA1 Message Date
Jarkko Nikula 6984992bf0 ASoC: OMAP: Set minimum buffer size constraint for McBSP2 in OMAP3
McBSP2 in OMAP3 has 1 ksample (1k x 32 bit) internal FIFO. During
initial playback startup, this FIFO is keeping the DMA request active
until the FIFO is full.

So now if ALSA buffer size is smaller, DMA is looping around it while
filling up the HW FIFO, generating burst of interrupts as well and SW
doesn't have any change to fill enough data.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-02 16:34:17 +01:00
Eric Miao 6335d05548 ASoC: make ops a pointer in 'struct snd_soc_dai'
Considering the fact that most cpu_dai or codec_dai are using a same
'snd_soc_dai_ops' for several similar interfaces, 'ops' would be better
made a pointer instead, to make sharing easier and code a bit cleaner.

The patch below is rather preliminary since the asoc tree is being
actively developed, and this touches almost every piece of code,
(and possibly many others in development need to be changed as
well). Building of all codecs are OK, yet to every SoC, I didn't test
that.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-04 22:29:47 +00:00
Misael Lopez Cruz ef390c0b6e ASoC: OMAP: Initialize XCCR and RCCR registers in McBSP DAI driver
This patch explicitly initializes McBSP Transmit Configuration
Control Register (XCCR) and Receive Configuration Control
Register (RCCR) to their reset values. Reset values are 26 ns
of DX delay and Transmit DMA disabled for XCCR register;
receive full cycle mode enabled and Receive DMA disabled for
RCCR register.

This patch requires a counterpart in OMAP McBSP driver before
to apply it. The required changes in McBSP were sent and approved
in linux-omap mailing list and patch is going upstream
(commit 3127f8f859 from linux-omap-2.6
tree).

Signed-off-by: Misael Lopez Cruz <x0052729@ti.com>
[ jarkko.nikula@nokia.com: Commit id for counterpart patch corrected ]
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-29 13:17:45 +00:00
Jarkko Nikula bd25867a6c ASoC: Fix incorrect DSP format in OMAP McBSP DAI and affected drivers
- OMAP McBSP DAI driver claims to support DSP_A format which has 1-bit data
  delay but configures link for 0-bit data delay which is in fact DSP_B
- Fix this by changing format from DSP_A to DSP_B
- Fix also TLV320AIC23 codec and OSK5912 machine drivers since the same
  error is populated also there

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Acked-by: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-22 16:15:20 +00:00
Takashi Iwai f73f2a6a23 ALSA: ASoC - Fix symbol conflicts in omac-mcbsp.c
Add snd_ prefix to avoid the conflict of symbols in omac-mcbsp.c:
  sound/soc/omap/omap-mcbsp.c:503: error: static declaration of 'omap_mcbsp_init' follows non-static declaration
  arch/arm/plat-omap/include/mach/mcbsp.h:373: error: previous declaration of 'omap_mcbsp_init' was here

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10 07:59:33 +01:00
Takashi Iwai c9b3a40ff2 ALSA: ASoC - Fix wrong section types
The module init entries should be __init instead of __devinit.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10 07:47:22 +01:00
Mark Brown 3f4b783cfd ASoC: Register platform DAIs
Register all platform DAIs with the core.  In line with current behaviour
this is done at module probe time rather than when the devices are probed
(since currently that only happens as the entire ASoC card is registered
except for those drivers that currently implement some kind of hotplug).
Since the core currently ignores DAI registration this has no practical
effect.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-09 10:49:27 +00:00
Jarkko Nikula 375e8a7c94 ASoC: OMAP: Add support for mono audio links in McBSP DAI
Patch adds support for mono audio links so that McBSP DAI can operate with
real mono codecs. In I2S, the signalling remains the same but only first
frame (left channel) is transmitting audio data and second frame having null
data. In DSP_A, only first frame is transmitted.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-11-25 15:21:26 +00:00
Mark Brown 3ba9e10a6d ASoC: Remove DAI type information
DAI type information is only ever used within ASoC in order to special
case AC97 and for diagnostic purposes. Since modern CPUs and codecs
support multi function DAIs which can be configured for several modes
it is more trouble than it's worth to maintain anything other than a
flag identifying AC97 DAIs so remove the type field and replace it with
an ac97_control flag.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-11-24 18:01:31 +00:00
Jarkko Nikula 0c758bdd67 ASoC: OMAP: Fix preprocessor filled DAI name in McBSP DAI
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-11-21 14:35:06 +00:00
Mark Brown dee89c4d94 ASoC: Merge snd_soc_ops into snd_soc_dai_ops
Liam Girdwood's ASoC v2 work avoids having two different ops structures
for DAIs by merging the members of struct snd_soc_ops into struct
snd_soc_dai_ops, allowing per DAI configuration for everything.
Backport this change.

This paves the way for future work allowing any combination of DAIs to
be connected rather than having fixed purpose CODEC and CPU DAIs and
only allowing CODEC<->CPU interconnections.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-11-21 14:12:10 +00:00
Jarkko Nikula 0b6048561d ASoC: OMAP: Add more supported sample rates into McBSP DAI driver
Originally it was put too tight limits to support only 44.1 kHz and 48 kHz
sample rates in McBSP DAI driver. Extend it now to 8 kHz - 96 kHz. With
96 kHz and 2*16 bits, bit clock is 3.072 MHz < 3.125 MHz (I2S max?).

Tested on Nokia N810 with TVL320AIC33 from rates 8 - 96 kHz and on Texas
Instruments Beagle with TWL4030 from rates 8 - 48 kHz.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Acked-by: Steve Sakoman <steve@sakoman.com>
Acked-by: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-11-13 10:31:44 +00:00
Jarkko Nikula da6320becf ALSA: ASoC: OMAP: Continue fixing DSP DAI format in McBSP DAI driver
Fix "ASoC: OMAP: Fix DSP DAI format in McBSP DAI driver" was not correct
due misunderstanding of DSP_A format and similar error in TLV320AIC33
codec which was used to test the original fix.

This patch corrects now DSP_A format in OMAP McBSP DAI driver and is
verified with TLV320AIC23 codec that's implementing DSP_A correctly.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Cc: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-22 18:18:24 +02:00
Jarkko Nikula ba9d0fd0f0 ALSA: ASoC: OMAP: Fix DSP DAI format in McBSP DAI driver
Fix word clock length which must equal to one bit clock cycle in DSP mode.
Surprisingly McBSP is able synchronize into wrong length when it's
slave but e.g. TLV320AIC33 codec in slave configuration is outputting
some amount of noise if word clock length is longer than one bit clock
cycle.

Fix also bit clock and frame sync polarities in DSP mode since they are
opposite from I2S.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Cc: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-20 17:03:21 +02:00
Jarkko Nikula 2e89713a83 ALSA: ASoC: OMAP: Set DMA stream name at runtime in McBSP DAI driver
This suits better when adding support for multiple links and different
link formats.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-13 02:17:59 +02:00
Jarkko Nikula 406e2c48cf ALSA: ASoC: OMAP: Add support for OMAP2430 and OMAP34xx in McBSP DAI driver
Thanks to Arun KS <arunks@mistralsolutions.com> for fixing one typo in
original version of this patch.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-13 02:17:54 +02:00
Jarkko Nikula 8def464ddd ALSA: ASoC: OMAP: Add multilink support to McBSP DAI driver
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-13 02:17:48 +02:00
Arun KS 3336c5b548 ALSA: ASoC: Add DSP DAI format support to the OMAP McBSP driver
Enables DSP DAI format for McBSP in OMAP platform driver

Signed-off-by: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-13 02:16:59 +02:00
Russell King a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00
Liam Girdwood 8687eb8bde ALSA: asoc: omap - merge structs snd_soc_codec_dai and snd_soc_cpu_dai.
This patch merges struct snd_soc_codec_dai and struct
snd_soc_cpu_dai into struct snd_soc_dai for the Omap platform.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10 09:32:41 +02:00
Jarkko Nikula 2e74796a45 [ALSA] ASoC: Add drivers for the Texas Instruments OMAP processors
Add common OMAP ASoC drivers and machine driver for Nokia N810. Currently
supported features are:

- Covers OMAPs from 1510 to 2420
- Common DMA driver
- DAI link driver using McBSP port in I2S mode
- Basic machine driver for Nokia N810

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-29 19:01:56 +02:00