Similar to the power management situation on Rockchip boards, there are
two common RTC setups. For boards using the RK808 chip as a PMIC that
chip also serves as the RTC, while boards using the ACT8846 typically use
the Haoyu Microelectronics HYM8563 chip as their RTC.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most Rockchip SoCs have a DesignWare HS OTG USB 2.0 controller, enable
the driver for the Rockchip USB 2.0 PHY to make that functional.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable options needed for HDMI out on rockchip: DRM driver, Rockchip
DesignWare HDMI glue and the rockchip IOMMU (dependency of the DRM
driver).
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rockchip boards seem to have two common regulator setups. Various board
used the Active Semi act8846 often in combination with Silergy syr82x
regulators (e.g. Radxa Rock Pro/Rock 2, Firefly, and Netxeon R89 etc),
while others use regulator part of the Rockchip RK808 chip (e.g. the
various Veyron based chromebooks, Chipspark Popmetal etc)
Enable all these regulators.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable Rockchip I2C, SPI, PWM, thermal drivers.
Builtin are I2C (as it often required to control the pmic) and Thermal
drivers (to prevent thermal damage). SPI and PWM drivers configured as
modules
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds few missing essential configs in the multi_v7_defconf,
absense of some configs like PINCTRL_APQ8064 would prevent the board from
getting access to serial.
cc: Kevin Hilman <khilman@kernel.org>
cc: Tyler Baker <tyler.baker@linaro.org>
Tested-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge "Broadcom defconfig changes for v4.4" from Florian Fainelli:
This pull request contains the following changes for the multi_v7_defconfig:
- Jon adds support for the NorthStar Plus SocS to the multi_v7_defconfig file
* tag 'arm-soc/for-4.4/defconfig' of http://github.com/Broadcom/stblinux:
ARM: multi_v7_defconfig: Add NSP to defconfig
Add the Broadcom Northstar Plus SoC to the multi_v7_defconfig
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Acked-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Kill of the defconfig bits now when the marzen-reference board code is gone.
Based on work by Magnus Damm.
Acked-by: Magnus Damm <damm@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This is a collection of a few late fixes and other misc. stuff that
had dependencies on things being merged from other trees.
The bulk of the changes are for samsung/exynos SoCs for some changes
that needed a few minor reworks so ended up a bit late. The others
are mainly for qcom SoCs: a couple fixes and some DTS updates.
There's one conflict with drivers/cpufreq/exynos-cpufreq.c because
it's now been completely removed, but there were some fixes that hit
mainline in the meantime.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=85Ck
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull late ARM SoC updates from Kevin Hilman:
"This is a collection of a few late fixes and other misc stuff that had
dependencies on things being merged from other trees.
The bulk of the changes are for samsung/exynos SoCs for some changes
that needed a few minor reworks so ended up a bit late. The others
are mainly for qcom SoCs: a couple fixes and some DTS updates"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
ARM: multi_v7_defconfig: Enable PBIAS regulator
soc: qcom: smd: Correct fBLOCKREADINTR handling
soc: qcom: smd: Use correct remote processor ID
soc: qcom: smem: Fix errant private access
ARM: dts: qcom: msm8974-sony-xperia-honami: Use stdout-path
ARM: dts: qcom: msm8960-cdp: Use stdout-path
ARM: dts: qcom: msm8660-surf: Use stdout-path
ARM: dts: qcom: ipq8064-ap148: Use stdout-path
ARM: dts: qcom: apq8084-mtp: Use stdout-path
ARM: dts: qcom: apq8084-ifc6540: Use stdout-path
ARM: dts: qcom: apq8074-dragonboard: Use stdout-path
ARM: dts: qcom: apq8064-ifc6410: Use stdout-path
ARM: dts: qcom: apq8064-cm-qs600: Use stdout-path
ARM: dts: qcom: Label serial nodes for aliasing and stdout-path
reset: ath79: Fix missing spin_lock_init
reset: Add (devm_)reset_control_get stub functions
ARM: EXYNOS: switch to using generic cpufreq driver for exynos4x12
cpufreq: exynos: Remove unselectable rule for arm-exynos-cpufreq.o
ARM: dts: add iommu property to JPEG device for exynos4
ARM: dts: enable SPI1 for exynos4412-odroidu3
...
PBIAS regulator is required for MMC module in OMAP2, OMAP3, OMAP4,
OMAP5 and DRA7 SoCs. Enable it here.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Pull drm updates from Dave Airlie:
"This is the main pull request for the drm for 4.3. Nouveau is
probably the biggest amount of changes in here, since it missed 4.2.
Highlights below, along with the usual bunch of fixes.
All stuff outside drm should have applicable acks.
Highlights:
- new drivers:
freescale dcu kms driver
- core:
more atomic fixes
disable some dri1 interfaces on kms drivers
drop fb panic handling, this was just getting more broken, as more locking was required.
new core fbdev Kconfig support - instead of each driver enable/disabling it
struct_mutex cleanups
- panel:
more new panels
cleanup Kconfig
- i915:
Skylake support enabled by default
legacy modesetting using atomic infrastructure
Skylake fixes
GEN9 workarounds
- amdgpu:
Fiji support
CGS support for amdgpu
Initial GPU scheduler - off by default
Lots of bug fixes and optimisations.
- radeon:
DP fixes
misc fixes
- amdkfd:
Add Carrizo support for amdkfd using amdgpu.
- nouveau:
long pending cleanup to complete driver,
fully bisectable which makes it larger,
perfmon work
more reclocking improvements
maxwell displayport fixes
- vmwgfx:
new DX device support, supports OpenGL 3.3
screen targets support
- mgag200:
G200eW support
G200e new revision support
- msm:
dragonboard 410c support, msm8x94 support, msm8x74v1 support
yuv format support
dma plane support
mdp5 rotation
initial hdcp
- sti:
atomic support
- exynos:
lots of cleanups
atomic modesetting/pageflipping support
render node support
- tegra:
tegra210 support (dc, dsi, dp/hdmi)
dpms with atomic modesetting support
- atmel:
support for 3 more atmel SoCs
new input formats, PRIME support.
- dwhdmi:
preparing to add audio support
- rockchip:
yuv plane support"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1369 commits)
drm/amdgpu: rename gmc_v8_0_init_compute_vmid
drm/amdgpu: fix vce3 instance handling
drm/amdgpu: remove ib test for the second VCE Ring
drm/amdgpu: properly enable VM fault interrupts
drm/amdgpu: fix warning in scheduler
drm/amdgpu: fix buffer placement under memory pressure
drm/amdgpu/cz: fix cz_dpm_update_low_memory_pstate logic
drm/amdgpu: fix typo in dce11 watermark setup
drm/amdgpu: fix typo in dce10 watermark setup
drm/amdgpu: use top down allocation for non-CPU accessible vram
drm/amdgpu: be explicit about cpu vram access for driver BOs (v2)
drm/amdgpu: set MEC doorbell range for Fiji
drm/amdgpu: implement burst NOP for SDMA
drm/amdgpu: add insert_nop ring func and default implementation
drm/amdgpu: add amdgpu_get_sdma_instance helper function
drm/amdgpu: add AMDGPU_MAX_SDMA_INSTANCES
drm/amdgpu: add burst_nop flag for sdma
drm/amdgpu: add count field for the SDMA NOP packet v2
drm/amdgpu: use PT for VM sync on unmap
drm/amdgpu: make wait_event uninterruptible in push_job
...
Enable the GK20A GPU (via the Nouveau driver) and CPU frequency scaling
on Tegra124.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=xW1n
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.3-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig
ARM: tegra: Default configuration updates for v4.3-rc1
Enable the GK20A GPU (via the Nouveau driver) and CPU frequency scaling
on Tegra124.
* tag 'tegra-for-4.3-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Update multi_v7_defconfig
ARM: tegra: Update default configuration
Signed-off-by: Olof Johansson <olof@lixom.net>
- for exynos_defconfig
: enable SND_SOC_ODROIDX2 and SND_SIMPLE_CARD for
Odroid-XU3 to use max98090 audio codec
: enalbe SENSORS_NTC_THERMISTOR for Peach boards
: enable cpufreq-dt driver with ONDEMAND governor
for Exynos SoCs 3250, 4210, 4212, 4412 and 5250
- for multi_v7_defconfig:
: remove SAMSUNG_USB2PHY and SAMSUNG_USB3PHY are not used now
: enable SENSORS_NTC_THERMISTOR and EXYNOS_ADC for Peach boards
: enable REGULATOR_MAX77802 for Peach boards
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=0McP
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-new' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/late
Samsung defconfig updates for v4.3
- for exynos_defconfig
: enable SND_SOC_ODROIDX2 and SND_SIMPLE_CARD for
Odroid-XU3 to use max98090 audio codec
: enalbe SENSORS_NTC_THERMISTOR for Peach boards
: enable cpufreq-dt driver with ONDEMAND governor
for Exynos SoCs 3250, 4210, 4212, 4412 and 5250
- for multi_v7_defconfig:
: remove SAMSUNG_USB2PHY and SAMSUNG_USB3PHY are not used now
: enable SENSORS_NTC_THERMISTOR and EXYNOS_ADC for Peach boards
: enable REGULATOR_MAX77802 for Peach boards
* tag 'samsung-defconfig-new' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: exynos_defconfig: Enable cpufreq-dt driver
ARM: multi_v7_defconfig: Enable max77802 regulator
ARM: exynos_defconfig: Enable NTC Thermistors support
ARM: multi_v7_defconfig: Enable NTC Thermistors support
ARM: multi_v7_defconfig: Remove old Samsung USB PHY configs
ARM: exynos_defconfig: Enable CONFIG_SND_SOC_ODROIDX2 for Odroid-XU3
Signed-off-by: Olof Johansson <olof@lixom.net>
Without this, the multi_v7_defconfig kernel cannot boot all CPUs
nor do deep cpuidle power saving on a TC2 board.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This introduces support for a couple of new panels and also contains
some work to restructure the directories to get more consistency, to
deal better with more panel and bridge drivers getting added.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Dee7
-----END PGP SIGNATURE-----
Merge tag 'drm/panel/for-4.3-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/panel: Changes for v4.3-rc1
This introduces support for a couple of new panels and also contains
some work to restructure the directories to get more consistency, to
deal better with more panel and bridge drivers getting added.
* tag 'drm/panel/for-4.3-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/bridge: Put Kconfig entries in a separate menu
drm/panel: Add support for LG LG4573 480x800 4.3" panel
drm/panel: Add display timing for Okaya RS800480T-7X0GP
of: Add Okaya Electric America vendor prefix
drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel
drm/panel: simple: Add support for AUO B080UAN01
drm/panel: simple: Correct minimum hsync length of the HannStar HSD070PWW1 panel
drm/panel: simple: Add bus format for HannStar HSD070PWW1 LVDS panel
drm/bridge: Add vendor prefixes
drm/panel: Add Samsung prefix to panel drivers
drm/exynos: Remove PTN3460 dependency
Use vendor prefixes for Kconfig symbols and filenames. This should make
it easier to identify the various bridge drivers and to organize the
directory.
v2: fix object name for dw-hdmi (Fabio Estevam)
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add Tegra-specific configuration options to multi_v7_defconfig:
* HDA controller and codec support
* Watchdog support
* Nouveau (for GK20A GPU) support
Signed-off-by: Thierry Reding <treding@nvidia.com>
The likelihood of getting a large number of panel drivers from different
vendors is quite high. Add a prefix to the two existing Samsung panel
drivers to set a guideline for future patch submissions. Using vendor
prefixes consistently should allow a cleaner organization of the tree.
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Exynos5420 based Peach Pit and Exynos5800 based Peach Pi Chromebooks
use the Maxim max77802 Power Management IC (PMIC). This PMIC has besides
other devices, a set of regulators that can be controller over I2C.
Commit f3caa529c6 ("ARM: multi_v7_defconfig: Enable max77802 regulator,
rtc and clock drivers") was supposed to enable the config option for the
regulator driver as a module but the final version that landed did not
include this. The commit was modified and the REGULATOR_MAX77802 removed
since it was thought to be useless.
Unfortunately that's not the case for the mentioned reason above so this
patch enables the needed Kconfig option.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[kgene@kernel.org: fixed ordering according to make savedefconfig]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Two patches that enable various Allwinner related drivers drivers both in
sunxi_defconfig and in multi_v7_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJVvdfTAAoJEBx+YmzsjxAgzisQAIOaRrW9+/m+u10n9vRXttt/
cgcSMfWyII2AZlYobH8EKaRS3HYcN4Dv5iinShJuMB9O6ScX6/rp3Oc+cy67vpOT
N++B9Fyg17k0LVMnnfBhiVncLvJje33Ducucxyiw1sGZjlY15HBFI99PkQo+SCMa
xYjbqoyIf/r0jIFyV4EkN+O0gzaIeXFm6KcqwVRkBDSeK7aItFrWg/g/8O45W3t+
eK2OZwXALny1puB6VUgSGilTaCl+DXdagsDuXYjgSV1VfA1iohfNx0Y9nu3o3Ed+
buxLaZtmdTejS6bNbfyDFd6LJxLZpRQ2T8XXnNXw8sohaglchkMsobuuqITaQX5g
IF1RiYXzIdzFiH/JPFiL9OPYa4nGtxD4ntr0HBK41EK5PqRGNE+u7MOT+Uw+8Ouq
AJJWTnSc18sDep7Y23zgFLk7r4d1Lproino531sokJiJpbG9uFd0dnWxEGtofPMG
lhXQvIwzveEQvrOgQM+wCgnSSbmfuDI4jnsmYfLqMtRSCazwv64Pa1ESZtvXV1Au
WfDjecL0/V7FwFf1BsEW3MOfE3TdyY8vW9urfY3ewZKsmwwlimv82QdMrua6p4nA
ou67eVlkdnkZ7/Nxx2/MBqP+VqmOjm/6ovfm/Udih+AwWX7TFQGKFLFQFSujn6Wi
AxJ5RxBRlhNbGCgNPkH0
=SkuD
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig
Allwinner defconfig changes for 4.3
Two patches that enable various Allwinner related drivers drivers both in
sunxi_defconfig and in multi_v7_defconfig
* tag 'sunxi-defconfig-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev
ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable drivers for Allwinner P2WI, PWM, cryptodev (Security System) and
sun6i DMA engine. Also enable EXTCON as PHY_SUN4I_USB depends on it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Exynos5420 Peach Pit and Exynos5800 Peach Pi Chromebooks have
IIO based ADC thermistors. Enable module support for its driver
and also for the needed Exynos ADC driver.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The old drivers/usb/phy/phy-samsung-usb{2,3} are now deleted since
were replaced by newer drivers that use the Generic PHY framework
but their Kconfig options were left over in multi_v7_defconfig.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Let MX6UL and MX7D SoCs be selected by default.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch enables Renesas DPCM related sound card.
It is used for...
- Sampline rate convert
- CTU/MIXer
Note: you need to enable these settings on DTS file
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The UniPhier on-chip UART driver was merged into the mainline by
commit 1a8d2903cb ("serial: 8250_uniphier: add UniPhier serial
driver").
Enable it from multi_v7_defconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
A bunch of defconfig changes, and some patches to make the Allwinner H3 and
A33 boot properly.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=m0CY
-----END PGP SIGNATURE-----
Merge tag 'sunxi-late-for-4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes
Merge "Allwinner late changes for 4.2" from Maxime Ripard:
Allwinner late changes for 4.2
A bunch of defconfig changes, and some patches to make the Allwinner H3 and
A33 boot properly.
* tag 'sunxi-late-for-4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi: Enable simplefb in the defconfig
ARM: Remove deprecated symbol from defconfig files
ARM: sunxi: Add Machine support for A33
ARM: sunxi: Introduce Allwinner H3 support
Documentation: sunxi: Update Allwinner SoC documentation
Commit b2b3a8b934 ("power/reset: Remove sun6i reboot driver") removed
the sun6i reboot driver. But sunxi_defconfig and multi_v7_defconfig
still contain the symbol CONFIG_POWER_RESET_SUN6I that was deprecated
by that commit, so remove it.
Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Broadcom NAND driver is used by brcmstb, bcm63xx, bcm5301x and
Cygnus/iProc under mach-bcm, this is enough critical mass to enable it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
We keep collecting defconfig updates in a separate branch mostly to encourage
people to handle them separately and avoid conflicts between different topics.
Most of these are enablement of new SoCs, boards or drivers that have
come in, or minor config refreshes due to reorderings in Kconfig
files, etc. I.e. mostly minor churn of various kinds.
Conflicts: None
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=q6ks
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' into test-merge
ARM: SoC: defconfig updates for v4.2
We keep collecting defconfig updates in a separate branch mostly to encourage
people to handle them separately and avoid conflicts between different topics.
Most of these are enablement of new SoCs, boards or drivers that have
come in, or minor config refreshes due to reorderings in Kconfig
files, etc. I.e. mostly minor churn of various kinds.
Conflicts: None
# gpg: Signature made Wed Jun 24 21:32:27 2015 PDT using RSA key ID D3FBC665
# gpg: Good signature from "Kevin Hilman <khilman@deeprootsystems.com>"
# gpg: aka "Kevin Hilman <khilman@linaro.org>"
# gpg: aka "Kevin Hilman <khilman@kernel.org>"
commit dcf9a03bff (ARM: multi_v7_defconfig: Enable PMIC and MUIC
drivers for exynos) mistakenly added an duplicate line for
CONFIG_COMMON_CLK_QCOM=y. Remove it.
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Enable the Exynos DSI and S6E8AA0 panel for full X11 display on Trats2.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Since commit 100832abf0 ("usb: isp1760: Make HCD support
optional"), CONFIG_USB_ISP1760_HCD is automatically selected when
needed. Enabling that option in the defconfig is now a no-op, and no
longer enables ISP1760 HCD support.
Re-enable the ISP1760 driver in the defconfig by enabling
USB_ISP1760_HOST_ROLE instead.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the USB OHCI driver for Exynos SoCs: S5PV210, Exynos4 family,
Exynos5250, Exynos5440 and Exynos542x/5800 family.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable support for Thermal Monitoring Unit present on Exynos SoCs. This
allows detection of overheat and handling this gracefully.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable drivers for PMICs and MUICs present on Exynos-based devices:
- max14577: charger, fuel gauge (max17040), regulator,
used on: Gear 1, Gear 2,
- max77693: charger, fuel gauge (max17042),
used on: Trats2,
- s5m/s2mps: RTC, clock,
used on: Arndale, Arndale Octa, Gear 1, Gear 2
This allows full usage of charging stack on these devices along with RTC
and 32 kHz clocks.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
[kgene@kernel.org: savedefconfig]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Current Exynos CPU idle driver supports entering AFTR (Arm Off, Top
Running) mode on Exynos3250, Exynos4210 (coupled), Exynos4x12 and
Exynos5250. Enable it in default configuration to reduce energy
consumption.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>