Commit Graph

6 Commits

Author SHA1 Message Date
Sylwester Nawrocki 91b20618f7 ARM: dts: Add pinctrl entries for Exynos4x12 FIMC-IS peripherals
Add pinctrl nodes for the ISP I2C0, ISP I2C1 and ISP UART devices.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-06 02:49:43 +09:00
Sylwester Nawrocki 0209c578ca ARM: dts: Correct camera pinctrl nodes for Exynos4x12 SoCs
Add separate nodes for the CAMCLK pin and turn off pull-up on camera
ports A, B. The video bus pins and the clock output (CAMCLK) pin need
separate nodes since full camera port is not used in some configurations,
e.g. for MIPI CSI-2 bus only CAMCLK is required and data/clock signal
use separate dedicated pins.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-06 02:49:43 +09:00
Sachin Kamat e4c2ec6ae7 ARM: dts: Remove keypad entries from exynos4x12-pinctrl.dtsi
Keypad pins/lines are board specific and should be added to respective
board dts files.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-10 17:22:29 +09:00
Shirish S ebf4762812 ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrl
This patch corrects the pin function value of sd4_bus8
from 3 to 4. This is verified on origen board for testing
eMMC on dw_mci controller.

Signed-off-by: Shirish S <s.shirish@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-02-12 10:35:50 -08:00
Tomasz Figa d80162eccd ARM: dts: Use drive strength 3 for SD pins for exynos4
This patch modifies pin control groups of SD pins on EXYNOS4210
and EXYNOS4X12 to use drive strength 3 as a default value which
corresponds to S5P_GPIO_DRVSTR_LV4 in legacy non-DT code.

This is needed at least on Origen board for sdhci2 to work and
if any other drive strength is required on each board, we can
overide it.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: edited commit message]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22 00:39:01 +09:00
Tomasz Figa 64a574344d ARM: dts: Add nodes for pin controllers for exynos4x12
This patch adds nodes for pin controllers available on
EXYNOS4X12 SoCs supported by pinctrl-samsung driver.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-19 10:03:07 +09:00