Commit Graph

70 Commits

Author SHA1 Message Date
Shawn Guo ea257a0328 ARM: imx: add ocram clock for imx53
Add missing ocram gate clock for imx53 and also represent it in device
tree ocram node.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:29:46 +08:00
Shawn Guo 5da826abe9 ARM: dts: imx: use generic DMA bindings for SSI nodes
Updates SSI nodes to adopt generic DMA bindings.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:29:32 +08:00
Fabio Estevam 070bd7e491 ARM: dts: imx: Add the missing cpus node
To make it consistent with the other i.mx SoCs, let's add the cpus nodes.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:29:01 +08:00
Huang Shijie fb72bb2148 ARM: dts: imx: add #dma-cells property for sdma
Add the #dma-cells property for all the sdma in all the imx platforms.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:28:50 +08:00
Fabio Estevam fbf970f61e ARM: dts: mx53qsb: Enable VPU support
Enable Video Processing Unit (VPU) support.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:28:48 +08:00
Philipp Zabel 481fbe1352 ARM: dts: add sram for imx53 and imx6q
This patch enables the On-Chip SRAM (OCRAM) on i.MX53 and i.MX6 SoCs.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:28:47 +08:00
Sascha Hauer cf4e577e98 ARM: dts: i.MX53: Add i2c and spi aliases
This allows to order the i2c and spi devices correctly.
While at it reorder the aliases entries alphabetically.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:28:36 +08:00
Sascha Hauer 4f3b2a41e2 ARM: dts: i.MX53: Add iim node
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:28:31 +08:00
Philipp Zabel f5786b8e93 ARM i.MX53: Fix UART pad configuration
The current default pad configuration for UART RX and TX pads sets a 360k
pull-down and writes 1 to a reserved bit (1 << 0). It doesn't seem right to
me that in idle state, the UART has to keep the signal high against a
pull-down resistor.

This patch instead sets a 100k pull-up, which incidentally corresponds to the
register reset value for all but one (MX53_PAD_KEY_ROW0__UART4_RXD_MUX) pad,
and removes the write to the reserved bit.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-15 08:28:05 +08:00
Philipp Zabel 19194c2b61 ARM i.MX53: Add TVE entry to i.MX53 dtsi
This adds the Television Encoder (TVEv2) device tree node
to the i.MX53 dtsi.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:26 +08:00
Jonas Andersson fad1ea0031 ARM: dts: imx53: add fec pinctrl
Add a group to the fec pinctrl, for use with MII interface.

Signed-off-by: Jonas Andersson <jonas@microbit.se>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:23 +08:00
Jonas Andersson 1a6c56008a ARM: dts: imx53: add ecspi2 pinctrl
Add ecspi2 pinctrl.

Signed-off-by: Jonas Andersson <jonas@microbit.se>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:23 +08:00
Jonas Andersson 4017f7919a ARM: dts: imx53: add cspi pinctrl
Add a group to the cspi pinctrl.

Signed-off-by: Jonas Andersson <jonas@microbit.se>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:22 +08:00
Rogerio Pimentel c268947aa6 ARM: dts: mx53qsb: Add support for parallel display
Add support for CLAA WVGA display for i.MX53 QSB.

Signed-off-by: Rogerio Pimentel <rogerio.pimentel@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:22 +08:00
Steffen Trumtrar c3fcca2a1d ARM: i.MX53: add uart2 pinctrl
Add a group to the uart2 pinctrl.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:17 +08:00
Steffen Trumtrar 47d63397ac ARM: i.MX53: add uart1 pinctrl
Add a group to the uart1 pinctrl.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:17 +08:00
Steffen Trumtrar 20e081cf52 ARM: i.MX53: add pwm2 pinctrl
Add pinctrl for pwm2.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:17 +08:00
Steffen Trumtrar 6a079e6853 ARM: i.MX53: add ecspi pinctrl
Add a group to the ecspi pinctrl.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:17 +08:00
Steffen Trumtrar d0cae684e5 ARM: i.MX53: add csi pinctrl
Add a group to the csi pinctrl.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:16 +08:00
Steffen Trumtrar bb6e2fa3f5 ARM: i.MX53: add audmux pinctrl
Add a group to the audmux pinctrl.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:16 +08:00
Marek Vasut 950504973d ARM: mx5: Add PWM1 pinctrl data
This patch adds pinctrl data for PWM1 on MX53.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:15 +08:00
Marek Vasut 9f7fbb150f ARM: mx5: Add LCD IPU pinctrl data
This patch adds pinmux for IPU LCD 1 and IPU LVDS.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:15 +08:00
Marek Vasut efee5e14b0 ARM: mx5: Add NAND pinctrl data
This patch adds pinctrl data for NAND on MX53.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:14 +08:00
Marek Vasut ed5be46596 ARM: mx5: Add I2C2 pinctrl data
This patch adds pinctrl data for different mux of I2C2 on MX53.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:14 +08:00
Marek Vasut d797471437 ARM: mx5: Add I2C1 pinctrl data
This patch adds pinctrl data for different mux of I2C1 on MX53.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:14 +08:00
Marek Vasut 0f14ac4e26 ARM: mx5: Add CAN1 pinctrl data
This patch adds pinctrl data for different mux of CAN1 on MX53.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:14 +08:00
Marek Vasut dd04c17bfa ARM: mx5: Add AUDMUX4 pinctrl data
This patch adds pinctrl data for the AUDMUX4 on MX53.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:13 +08:00
Philipp Zabel c60dc1d1bf ARM i.MX53: dts: add i2c aliases
This allows to order the i2c character devices correctly,
so that /dev/i2c-0 corresponds to i2c1, /dev/i2c-1 corresponds
to i2c2, and so on. Currently they are ordered by register
address.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:13 +08:00
Michael Grzeschik a79025c483 ARM: dts: imx: use usb-nop-xceiv usbphy entries for imx5x
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:11 +08:00
Michael Grzeschik 8e388908e1 ARM: dts: imx: add imx5x usb clock DT lookups
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:11 +08:00
Michael Grzeschik a57350216d ARM: dts: imx: add imx5x usbmisc entries
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:11 +08:00
Jonas Andersson 37523dc5ec ARM: dts: imx: fix clocks for cspi
The CSPI controller has only one clock, but the driver spi-imx.c needs
clock "per" to calculate bitrate divisor.

Signed-off-by: Jonas Andersson <jonas@microbit.se>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-24 13:41:00 +08:00
Philipp Zabel 8d84c3740f ARM i.MX5: Add system reset controller (SRC) to i.MX51 and i.MX53 device tree
Also, link SRC to IPU via phandle.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09 22:52:57 +08:00
Philipp Zabel 420714aaa6 ARM i.MX53: Add LDB device to device tree
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09 22:52:55 +08:00
Philipp Zabel 5af9f14338 ARM i.MX53: Add IOMUXC GPR to device tree
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09 22:52:55 +08:00
Philipp Zabel 4438a6a1cc ARM i.MX5: Move IPU clock lookups into device tree
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09 22:52:55 +08:00
Sascha Hauer cc8aae9bc6 ARM: i.MX53: Add GPT devicetree node
The GPT is the GPT timer found on i.MX SoCs. This patch adds the
devicetree node for it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09 22:52:53 +08:00
Shawn Guo e16415313c pinctrl: imx: move hard-coding data into device tree
Currently, all imx pinctrl drivers maintain a big array of struct
imx_pin_reg which hard-codes data like register offset and mux mode
setting for each pin function.  Every time a new imx SoC support is
added, we need to add such a big mount of data.  With moving to single
kernel build, it's only matter of time to be blamed on memory consuming.

With DTC pre-processor support in place, the patch moves all these data
into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and
changing the PIN_FUNC_ID parsing code a little bit.

The pin id gets re-numbered based on mux register offset, or config
register offset if the pin has no mux register, so that kernel can
identify the pin id from register offsets provided by device tree.

As a bonus point of the change, those arbitrary magic numbers standing
for particular PIN_FUNC_ID in device tree sources are now replaced by
macros to improve the readability of dts files.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09 22:52:50 +08:00
Shawn Guo 36dffd8f49 ARM: imx: use #include for all device trees
Replace /include/ (dtc) with #include (C pre-processor) for all imx DT
files, so that gcc -E handles the entire include tree, and hence any of
those files can #include some other file e.g. for constant definitions.

This allows future use of #defines and header files in order to define
names for various constants, such as pinctrl settings. Use of those
features will increase the readability of the device tree files.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09 22:52:49 +08:00
Martin Fuzzey a82b7b9c8b ARM: dts: Add device tree entry for onewire master on i.MX53
Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-10 23:25:47 +08:00
Steffen Trumtrar 11ab21e90a ARM: dts: imx53: pinctrl update
Add pinctrl for cspi, csi.
Add new pingroups for can1 and uart3.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-10 23:25:44 +08:00
Marek Vasut e37f0d5b32 ARM: mx5: Fix MX53 flexcan2 clock
The second FlexCAN port uses different clock than the first one, configure
correct clock to prevent hanging of the system during bringing up of the port.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-08 08:53:07 +08:00
Linus Torvalds db5b0ae007 ARM: arm-soc: device tree conversions and enablement
Continued device tree conversion and enablement across a number of
 platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
 smaller series as well.
 
 ux500 has seen continued conversion for platforms. Several platforms have
 seen pinctrl-via-devicetree conversions for simpler multiplatform. Tegra
 is adding data for new devices/drivers, and Exynos has a bunch of new
 bindings and devices added as well.
 
 So, pretty much the same progression in the right direction as the last
 few releases.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQySW7AAoJEIwa5zzehBx39xcP/jzEQOTOJdK4zJd1OjgrQoX/
 WnhbGJT941RNjRjvDG6HmZzhpsRoE4q/zkjFEKoKELdikRW0hYoR+zPCGuB7XtN5
 aF1ZQrTx4gHf4KE7doIB8slaWeOq8aG2TLFhylyy+cuaIpRK0NG0pAR0ZqWaoga9
 tZFciqzplLeo50vZ+y+lVVsR40j/w29EjwPXhCV30//gGOYLyp/VDu5PRtrBdgh8
 EgpcT2EWJwMCN/Upcao/q2JbQktPHPpSwnpaUAALYB20uD7k5jo7wtYE/+L9nn6B
 bxcCDTMVmqzNTF+y0P16hDcs5jMLVjpI0xBiyZ1G6gShpggsSZCHY5ynjAtQ19se
 r+2WrNfOR23k6arJuOUAQSEnLdx0T5SlW6CJeFEofKv4uoebxAbKUiNO4ShWskhd
 nNptX1+L3hj3zpjGcEHmL6bd+nGtyMeoG9Yekcv1oZxdVcpKhFxh0s5PEJBEeXcN
 M7aAWlWJkplV22Olqhpc/3INCweq6E+zBrBxZaUBW/JCzGrqBUGC0BULDPAkmC4J
 CKL6IqIB73jGQ4OY14IaMU20GJrIGxZ7wzXOp4aw3OUpRlxsgurfyFQeIjUvVoZL
 PJ8DRoAVwreVHvKfgZZVKpSAY7dwcWbxpWsYlrH3zWIC5vRJ0UFwsD0TpLJWd6Vi
 XA8gQcJRWKGS8E5mRY39
 =Rk9v
 -----END PGP SIGNATURE-----

Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree conversions and enablement from Olof Johansson:
 "Continued device tree conversion and enablement across a number of
  platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
  smaller series as well.

  ux500 has seen continued conversion for platforms.  Several platforms
  have seen pinctrl-via-devicetree conversions for simpler
  multiplatform.  Tegra is adding data for new devices/drivers, and
  Exynos has a bunch of new bindings and devices added as well.

  So, pretty much the same progression in the right direction as the
  last few releases."

Fix up conflicts as per Olof.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits)
  ARM: ux500: Rename dbx500 cpufreq code to be more generic
  ARM: dts: add missing ux500 device trees
  ARM: ux500: Stop registering the PCM driver from platform code
  ARM: ux500: Move board specific GPIO info out to subordinate DTS files
  ARM: ux500: Disable the MMCI gpio-regulator by default
  ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
  ARM: Kirkwood: Add support LED of OpenBlocks A6
  ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
  ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
  ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
  ARM: kirkwood: Add support DT of second I2C bus
  ARM: kirkwood: Convert mplcec4 board to pinctrl
  ARM: Kirkwood: Convert km_kirkwood to pinctrl
  ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
  ARM: Kirkwood: Convert IX2-200 to pinctrl.
  ARM: Kirkwood: Convert lsxl boards to pinctrl.
  ARM: Kirkwood: Convert ib62x0 to pinctrl.
  ARM: Kirkwood: Convert GoFlex Net to pinctrl.
  ARM: Kirkwood: Convert dreamplug to pinctrl.
  ARM: Kirkwood: Convert dockstar to pinctrl.
  ...
2012-12-13 10:39:26 -08:00
Sascha Hauer 9ae90afaeb ARM i.MX53: Add pwm support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-22 09:15:48 +01:00
Fabio Estevam f40f38d1dc ARM: mx5: Replace clk_register_clkdev with clock DT lookup
Similarly as it was done for mx6q, use a DT lookup in order to make maintainance
task for the clock devices easier.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-22 09:15:26 +01:00
Sascha Hauer abed9a6bf2 ARM i.MX53: Add IPU support
This adds the IPU device to the devicetree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16 16:33:37 +01:00
Sascha Hauer 7b7d672734 ARM i.MX dts: Consistently add labels to devicenodes
Having labels before each node allows board bindings to reference
to nodes by using the &nodename {} notation. This way boards do not
have to resemble the whole devicetree layout. Due to less indention
needed the board files also get better readability. Since the label
make the documentation behind the nodes unnecessary it is removed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16 14:18:53 +08:00
Roland Stigge a1fff236b4 ARM: dts: imx53: pinctl update
This patch supplements pinctl support on i.MX53.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16 14:18:53 +08:00
Sascha Hauer c104b6a2ed ARM i.MX dtsi: Add default bus-width property for esdhc controller
According to Documentation/devicetree/bindings/mmc/mmc.txt bus-width
is a mandatory property. While this is currently enforced nowhere, it's
a good habit to just add the property now to allow to add common helper
functionality for the mmc property parsing later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16 14:18:51 +08:00
Shawn Guo 5bdfba29f1 i2c: imx: remove cpu_is_xxx by using platform_device_id
This is some amount of work left/forgot from device tree conversion.
Instead of checking cpu_is_xxx to determine the controller type, the
driver should use platform_device_id, which should match the device
tree compatible string.

The patch changes the driver to use platform_device_id rather than
cpu_is_xxx to determine the controller type/version.  It also updates
the platform code and device tree source accordingly.

As the result, mach/hardware.h inclusion gets removed from the driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: linux-i2c@vger.kernel.org
2012-10-15 10:03:15 +08:00