Commit Graph

19 Commits

Author SHA1 Message Date
Shawn Guo 951ebf58bf ARM: dts: imx: ocram size is different between imx6q and imx6dl
The ocram on imx6q is 256 KiB while on imx6dl it's 128 KiB.  Let's
have separate node for imx6q and imx6dl.  It also changes imx6q size
0x3f000 to 0x40000 to match the hardware.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Liu Ying <Ying.Liu@freescale.com>
2013-08-22 23:29:44 +08:00
Shawn Guo c56009b2f6 ARM: dts: imx: share pad macro names between imx6q and imx6dl
The imx6q and imx6dl are two pin-to-pin compatible SoCs.  The same board
design can work with either chip plugged into the socket, e.g. sabresd
and sabreauto boards.

We currently define pin groups in imx6q.dtsi and imx6dl.dtsi
respectively because the pad macro names are different between two
chips.  This brings a maintenance burden on having the same label point
to the same pin group defined in two places.

The patch replaces prefix MX6Q_ and MX6DL_ with MX6QDL_ for both SoCs
pad macro names.  Then the pin groups becomes completely common between
imx6q and imx6dl and can just be moved into imx6qdl.dtsi, so that the
long term maintenance of imx6q/dt pin settings becomes easier.

Unfortunately, the change brings some dramatic diff stat, but it's all
about DTS file, and the ultimate net diff stat is good.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:29:11 +08:00
Huang Shijie a0bffd0cac ARM: dts: imx6q{dl}: add a DTE uart pinctrl for uart2
In the arm2 board, the UART2 works in the dte mode.
So add a pinctrl for both the imx6q{dl} boards.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:29:08 +08:00
Fabio Estevam eda5fe8bd7 ARM: dts: imx6dl-wandboard: Add audio support
Wandboard has a sgtl5000 codec.

Add audio support.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:29:00 +08:00
Philipp Zabel 964c847a42 ARM i.MX6DL: dts: add clock and mux configuration for LDB
i.MX6DL does not have the second IPU, but the LVDS multiplexers can connect
either LVDS channel of the LDB to IPU1 DI0 or IPU1 DI1.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[shawn.guo: remove "crtcs" property from imx6qdl.dtsi]
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:28:49 +08:00
Sascha Hauer f0741ce730 ARM: dts: i.MX6: sync imx6q and imx6dl pinmux entries
The i.MX6Q and i.MX6DL are pin compatible, so the pinmux entries
should be in sync. This patch systematically adds the pinmux entries
missing from the imx6q to the imx6dl file.
Some name inconsistencies and whitespace damage is fixed along the
way.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:28:24 +08:00
Huang Shijie 4702ca5175 ARM: dts: imx6dl: add a new pinctrl for ecspi1
This new pinctrl is used in the imx6dl-sabresd board.

Signed-off-by: Huang Shijie <b32955@freescale.com>
2013-08-22 23:28:13 +08:00
Arnd Bergmann ed2ca6ee4b imx device tree changes for 3.11:
* A bunch of new board additions, imx6sl-evk, vf610-twr, imx53-tx53,
   imx53-m53evk and imx27-phytec-phycore
 * Various pinctrl setting updates and additions
 * Enable various on board peripherals, usb, audio, nor, display etc.
 * Configure L2 cache data and tag latency from device tree
 * Add imx-weim bus driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJRvsoqAAoJEFBXWFqHsHzOWCsIAIhbVAz9Q/HvRrrT2/viiu5G
 S6/O16PbTqCmRPOgjnABGNOzRxo94/abhYT7gbGDz/zqAK2wEzEtUMwX8SXJbvl2
 ynt4oX/QTgeQsZZXW+dCdet6XiBSJwfbFFo0c01pCBvPb7os739pO3u3CUvNeqKx
 vsEfiq190PSPVL0FdfyLpQB+64ApUB1L/Ez9BaWmJjQYN2LWM0lxyvbC0SPo1vrw
 eb8NJ7qz/qq3zXCKgD8LEvkfal4ZsezPYzap1sqKl1+T2aN4CsgzYaRra/wDv7BC
 0ssW3+11StrwrbdwOEQRwiSU15fc9ckVldoFGlB+9HKTZxh80u0HmZRvFWbWo0E=
 =jngF
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt

From Shawn Guo:

imx device tree changes for 3.11:

* A bunch of new board additions, imx6sl-evk, vf610-twr, imx53-tx53,
  imx53-m53evk and imx27-phytec-phycore
* Various pinctrl setting updates and additions
* Enable various on board peripherals, usb, audio, nor, display etc.
* Configure L2 cache data and tag latency from device tree
* Add imx-weim bus driver

* tag 'imx-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6: (82 commits)
  ARM: dts: imx27: Add VPU devicetree node
  ARM: mxc: fix gpio-ranges for VF610
  ARM: dtsi: imx6qdl-sabresd: Enable WM8962 audio support
  ARM: dtsi: imx6qdl-sabresd: Enable SSI2 and AUDMUX
  ARM: dtsi: imx6qdl-sabresd: Add WM8962 CODEC support
  ARM: dtsi: imx6qdl-sabresd: add a fixed regulator for WM8962
  ARM: dtsi: imx6dl: Add a pinctrl for AUDMUX
  ARM: dtsi: imx6q/imx6dl: Add a pinctrl for I2C1
  ARM: dts: imx6qdl-sabresd: add clko1 iomux configuration
  ARM: dts: Phytec imx6q pfla02 and pbab01 support
  ARM: dts: imx6q: Add pinctrl for usdhc2 and enet
  ARM: dts: imx27-phytec-phycore-rdk: Add MTD name for NOR flash
  ARM: dts: imx27-phytec-phycore-rdk: Add SDHC support
  ARM: dts: i.MX27: Add SDHC devicetree nodes
  ARM: dts: i.MX27: Add DMA devicetree node
  ARM: dts: imx6qdl-sabreauto: enable the WEIM NOR
  ARM: dts: imx6dl: add pinctrls for WEIM NOR
  ARM: dts: imx6q: add pinctrls for WEIM NOR
  ARM: dts: imx6qdl: add more information for WEIM
  ARM: dts: imx6q{dl}: fix the pin conflict between SPI and WEIM
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20 02:11:29 +02:00
Nicolin Chen 547dc12858 ARM: dtsi: imx6dl: Add a pinctrl for AUDMUX
Add a pinctrl for AUDMUX used on imx6dl-sabresd.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:32 +08:00
Nicolin Chen ee531435eb ARM: dtsi: imx6q/imx6dl: Add a pinctrl for I2C1
Add a pinctrl for I2C1 used on imx6q/dl-sabresd.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:32 +08:00
Huang Shijie 9feded1ed3 ARM: dts: imx6dl: add pinctrls for WEIM NOR
Add two pinctrls for WEIM:
   one for the weim nor, another for the chipselect.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:30 +08:00
Huang Shijie 32d77d114c ARM: dts: imx6dl: add a pinctrl for eCSPI1
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:19 +08:00
Huang Shijie db37242ca0 ARM: dts: imx6dl: add pinctrl for gpmi-nand
add the pinctrl item for gpmi-nand.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:19 +08:00
Lorenzo Pieralisi 7925e89f54 ARM: dts: imx: cpus/cpu nodes dts updates
This patch updates the in-kernel dts files according to the latest cpus
and cpu bindings updates for ARM.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-23 10:45:12 +01:00
Fabio Estevam 89b82915c4 ARM: dts: Add initial support for Wandboard Dual-Lite
Wandboard is a development board that has two variants: one version based
on mx6 dual lite and another one based on mx6 solo.

For more details about Wandboard, please refer to: http://www.wandboard.org/

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09 22:53:39 +08:00
Shawn Guo 1aa8b3e06f ARM: dts: imx: add initial imx6dl-sabreauto support
Add initial imx6dl-sabreauto support based on the common stuff already
in imx6qdl-sabreauto.dtsi.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09 22:53:39 +08:00
Shawn Guo 9a8d6d55f6 ARM: dts: imx: add initial imx6dl-sabresd support
Add initial imx6dl-sabresd support based on the common stuff already in
imx6qdl-sabresd.dtsi.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09 22:53:38 +08:00
Shawn Guo 36dffd8f49 ARM: imx: use #include for all device trees
Replace /include/ (dtc) with #include (C pre-processor) for all imx DT
files, so that gcc -E handles the entire include tree, and hence any of
those files can #include some other file e.g. for constant definitions.

This allows future use of #defines and header files in order to define
names for various constants, such as pinctrl settings. Use of those
features will increase the readability of the device tree files.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09 22:52:49 +08:00
Shawn Guo 7c1da5854f ARM: dts: add dtsi for imx6q and imx6dl
Add dtsi for imx6q and imx6dl with non-common blocks moved into there.
Major differences between imx6dl and imx6q:

 * Dual vs. Quad cores
 * single vs. dual IPU
 * 128 vs. 256 KB OCRAM
 * imx6q: ECSPI5, OpenVG (GC355), SATA
 * imx6dl: I2C4, PXP, EPDC, LCDIF
 * iomuxc/pads definition

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-10 23:25:47 +08:00