Commit Graph

6 Commits

Author SHA1 Message Date
Peter Ujfalusi 50ff6b1d8c ARM: dts: twl6030: Add PWM support
Enable support for the PWMs and LED as PWM drivers.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09 00:16:50 +02:00
Kishon Vijay Abraham I 6ff862f6a8 ARM: dts: Add twl6030-usb data
Add twl6030-usb data node in twl6030 device tree file. twl6030-usb is the
comparator driver for USB that detects VBUS and ID events. The dt data is
comprised of two interrupts, one for ID and one for VBUS and a phandle to the
regulator.

Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29 16:56:29 +01:00
Rajendra Nayak 624411ceba arm/dts: Cleanup regulator naming and remove @0,1
regulators do not have a 'reg' property, hence the regulator@0,
regulator@1 do not make sense. get rid of it.

Reported-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-08-30 13:47:04 -07:00
Rajendra Nayak ae377aaf98 arm/dts: Mark vcxio, v2v1 and v1v8 regulators as always on
vcxio, v2v1 and v1v8 are expected to be always on, update the dtsi
for twl6030 to reflect this.

commit '86f5fc' regulator: core: Mark all DT based boards as having
full constraints) caused these to be disabled at late boot causing
OMAP4 boards (using twl6030) to lockup.

Reported-by: Kishon Vijay Abraham I <kishon@ti.com>
Reported-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Rajendra nayak <rnayak@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-08-07 03:56:17 -07:00
Rajendra Nayak ecc7b060a7 arm/dts: twl: Pass regulator data from dt
Pass all the voltage regulator information for
twl6030/twl4030 PMIC from device tree.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-03-12 23:42:22 +01:00
Benoit Cousson 4711244c76 arm/dts: twl6030: Add DTS file for twl6030 PMIC
Add a dedicated DTS file for the twl6030 Power IC.
This chip is a big SoC that will be reused in a lot of various
OMAP4+ boards.

Note: This file is supposed to be included in a board DTS that will
create the twl node in order to allow the &twl reference to work.

Exmaple:
...
&i2c1 {
    twl: twl@48 {
        reg = <0x48>;
        interrupts = <0 7 4>;
        interrupt-controller;
        interrupt-parent = <&gic>;
    };
};

/include/ "twl6030.dtsi"
...

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Rob Herring <rob.herring@calxeda.com>
2012-03-07 13:43:16 +01:00