Commit Graph

110 Commits

Author SHA1 Message Date
Linus Torvalds 8bc4d5f394 MTD updates for v4.7:
First cycle with Boris as NAND maintainer! Many (most) bullets stolen from him.
 
 Generic:
 
  * Migrated NAND LED trigger to be a generic MTD trigger
 
 NAND:
 
  * Introduction of the "ECC algorithm" concept, to avoid overloading the ECC
    mode field too much more
  * Replaced the nand_ecclayout infrastructure with something a little more
    flexible (finally!) and future proof
  * Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some of
    this into their own tree as well
  * Prepare the sunxi NAND driver to receive DMA support
  * Handle bitflips in erased pages on GPMI revisions that do not support
    this in hardware.
 
 SPI NOR:
 
  * Start using the spi_flash_read() API for SPI drivers that support it (i.e.,
    SPI drivers with special memory-mapped flash modes)
 
 And other small scattered improvments.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXQ9oUAAoJEFySrpd9RFgttf0P/3oIVCvLHSFIsi7XiUusWJWk
 Cb+xW3ujFd2kNUqAQGnyvPUGU1amgjAjy2kwMpvpOG07DVgSnxQVGaQLins8Zwpw
 auWxH8llISmC6UkNsS1jV0d7KzSMCT2Ne+BenRAn68kq3ovXPPB3B19B6dFj8ail
 s83ajoZhsn1+eyctiKtbhXgZWkJHlRmBeXPKAJcS0lBcSibR+6N+O//JEAMnyYvc
 7azuw0KMVwQNnNYFAfd9dilV5juZ9bZptTJYH7XuF+44FhxmSKvTX2a9gmp0C4Bm
 FszUiPrIWF+t98nSQxxSn/zPlyllFyoisa6F7eGnDHIz+bH0Emf2oVwsSG5ASl42
 XTml0kB0jCfuBfgAiyhYU2Uds7rSYs/ZcHr3iPgpUY3Sc3dgoArDdahMJXwqaoa8
 UdChu6A+rjhi9PqhzNNVTarbilp3pOVgKAUVEWTdpQ1wGU4c+9SNlTTwhPy4g7RB
 uKlqbMeiZ/5rPiihaMUNtzxMxSe9OGYW2HVNVExvmlF2Ca42M1xJJBMlAA6IIXyS
 35d3Y4F5zPP7U6GCVla06WHkL5ahXJWmI0Xhf+2jCnDMipeAl6eCEiAJY5EmvAnr
 FTpZ4qkspED69mO8oZW9ORje0n6PCm4XPOi4Vl8kci8tlBsEJMk9jaedWwGlZkRk
 I5leUP4NEougvuHce2Cn
 =J6KN
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "First cycle with Boris as NAND maintainer! Many (most) bullets stolen
  from him.

  Generic:
   - Migrated NAND LED trigger to be a generic MTD trigger

  NAND:
   - Introduction of the "ECC algorithm" concept, to avoid overloading
     the ECC mode field too much more
   - Replaced the nand_ecclayout infrastructure with something a little
     more flexible (finally!) and future proof
   - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some
     of this into their own tree as well
   - Prepare the sunxi NAND driver to receive DMA support
   - Handle bitflips in erased pages on GPMI revisions that do not
     support this in hardware.

  SPI NOR:
   - Start using the spi_flash_read() API for SPI drivers that support
     it (i.e., SPI drivers with special memory-mapped flash modes)

  And other small scattered improvments"

* tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits)
  mtd: spi-nor: support GigaDevice gd25lq64c
  mtd: nand_bch: fix spelling of "probably"
  mtd: brcmnand: respect ECC algorithm set by NAND subsystem
  gpmi-nand: Handle ECC Errors in erased pages
  Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value
  mtd: nand: add support for "nand-ecc-algo" DT property
  mtd: mtd: drop NAND_ECC_SOFT_BCH enum value
  mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping
  mtd: nand: read ECC algorithm from the new field
  mtd: nand: fsmc: validate ECC setup by checking algorithm directly
  mtd: nand: set ECC algorithm to Hamming on fallback
  staging: mt29f_spinand: set ECC algorithm explicitly
  CRIS v32: nand: set ECC algorithm explicitly
  mtd: nand: atmel: set ECC algorithm explicitly
  mtd: nand: davinci: set ECC algorithm explicitly
  mtd: nand: bf5xx: set ECC algorithm explicitly
  mtd: nand: omap2: Fix high memory dma prefetch transfer
  mtd: nand: omap2: Start dma request before enabling prefetch
  mtd: nandsim: add __init attribute
  mtd: nand: move of_get_nand_xxx() helpers into nand_base.c
  ...
2016-05-24 11:00:20 -07:00
Maarten ter Huurne 9d1e7875fa MIPS: JZ4740: Probe OHCI platform device via DT
The DT fragment will select the ohci-platform driver, since that can
handle the JZ4740 OHCI just fine. While I don't have a JZ4740-based
board with anything connected to the USB host controller, I did test
the generic OHCI driver successfully on a JZ4770-based board.

The device is disabled by default; boards that want to use it can
override the "status" property. The mass-production Qi LB60 boards
don't use the USB host controller.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13104/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13 19:09:24 +02:00
Maarten ter Huurne 46d6ccdbf3 MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant
AVT2 was a prototype board of which about 5 were made, none of which
are in use anymore.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13103/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13 19:08:52 +02:00
Boris Brezillon 50533187ee mtd: nand: jz4740: switch to mtd_ooblayout_ops
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2016-05-05 23:51:37 +02:00
Linus Walleij f5abf9ee51 MIPS: jz4740: use gpiochip data pointer
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: linux-mips@linux-mips.org
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:43 +01:00
Ralf Baechle b61a459fd2 MIPS: jz4740: Fix surviving instance of irq_to_gpio()
This is fallout from commit 832f5dacfa ("MIPS: Remove all the uses of
custom gpio.h").

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Suggested-by: Lars-Peter Clausen <lars@metafoo.de>
2016-02-19 00:17:24 +01:00
Thierry Reding ee42a3344c MIPS: JZ4740: Remove unused linux/leds_pwm.h include
The board code never sets up a leds-pwm device, so including the header
is not necessary.

Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11262/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-26 09:49:44 +01:00
Thierry Reding 0503b69729 MIPS: JZ4740: Use PWM lookup table
Associate the PWM with the pwm-beeper device using a PWM lookup table.
This will eventually allow the legacy function calls to pwm_request() to
be removed from all consumer drivers.

Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11261/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-26 09:49:43 +01:00
Alban Bedel 5b235dc264 MIPS: Fix the build on jz4740 after removing the custom gpio.h
Somehow the wrong version of the patch to remove the use of custom
gpio.h on mips has been merged. This patch add the missing fixes for a
build error on jz4740 because linux/gpio.h doesn't provide any machine
specfics definitions anymore.

Signed-off-by: Alban Bedel <albeu@free.fr>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11089/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-01 09:06:26 +02:00
Thomas Gleixner bd0b9ac405 genirq: Remove irq argument from irq flow handlers
Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.

Remove the argument.

Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-16 15:47:51 +02:00
Alban Bedel 832f5dacfa MIPS: Remove all the uses of custom gpio.h
Currently CONFIG_ARCH_HAVE_CUSTOM_GPIO_H is defined for all MIPS
machines, and each machine type provides its own gpio.h. However
only a handful really implement the GPIO API, most just forward
everythings to gpiolib.

The Alchemy machine is notable as it provides a system to allow
implementing the GPIO API at the board level. But it is not used by
any board currently supported, so it can also be removed.

For most machine types we can just remove the custom gpio.h, as well
as the custom wrappers if some exists. Some of the code found in
the wrappers must be moved to the respective GPIO driver.

A few more fixes are need in some drivers as they rely on linux/gpio.h
to provides some machine specific definitions, or used asm/gpio.h
instead of linux/gpio.h for the gpio API.

Signed-off-by: Alban Bedel <albeu@free.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Daniel Walter <dwalter@google.com>
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: James Hartley <james.hartley@imgtec.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Varka Bhadram <varkabhadram@gmail.com>
Cc: Masanari Iida <standby24x7@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Michael Buesch <m@bues.ch>
Cc: abdoulaye berthe <berthe.ab@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-ide@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: netdev@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10828/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03 12:08:02 +02:00
Viresh Kumar c87cbe0691 MIPS: jz4740: Migrate to new 'set-state' interface
Migrate jz4740 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-mips@linux-mips.org
Cc: linaro-kernel@lists.linaro.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Patchwork: https://patchwork.linux-mips.org/patch/10601/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03 12:07:51 +02:00
Thomas Gleixner f058dc80d6 MIPS: jz4740: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle.

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: linux-mips@linux-mips.org
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Patchwork: https://patchwork.linux-mips.org/patch/10695/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26 15:23:23 +02:00
Paul Burton 0752f92934 MIPS: ingenic: Initial MIPS Creator CI20 support
Add an initial device tree for the Ingenic JZ4780 based MIPS Creator
CI20 board.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10162/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:28 +02:00
Paul Burton 5b9cdd2449 MIPS: ingenic: Initial JZ4780 support
Support the Ingenic JZ4780 SoC using the existing code under
arch/mips/jz4740 now that it has been generalised sufficiently.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
Patchwork: https://patchwork.linux-mips.org/patch/10164/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:26 +02:00
Paul Burton 8838245d76 MIPS: JZ4740: use Ingenic SoC UART driver
Remove the serial support from arch/mips/jz4740 & make use of the new
Ingenic SoC UART driver. This is done for both regular & early console
output.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Apelete Seketeli <apelete@seketeli.net>
Cc: Alexandre Courbot <gnurou@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10160/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:26 +02:00
Paul Burton 6ec127fb3c MIPS: JZ4740: only detect RAM size if not specified in DT
Allow a devicetree to specify the memory present in the system rather
than probing it from the memory controller. This both saves the probing
for systems where the amount of memory is fixed, and will simplify the
bringup of later Ingenic SoCs where the memory controller register
layout differs.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10163/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:22 +02:00
Paul Burton 1237496af3 MIPS: JZ4740: remove clock.h
The only thing remaining in arch/mips/jz4740/clock.h is declarations of
the jz4740_clock_{suspend,resume} functions. Move these to
arch/mips/include/asm/mach-jz4740/clock.h for consistency with similar
functions, and remove the redundant arch/mips/jz4740/clock.h header.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10156/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:21 +02:00
Paul Burton 50d893ff72 MIPS, clk: move jz4740 clock suspend, resume functions to jz4740-cgu
The jz4740-cgu driver already has access to the CGU, so it makes sense
to move the few remaining accesses to the CGU from arch/mips/jz4740
there too. Move the jz4740_clock_{suspend,resume} functions there for
such consistency. The arch/mips/jz4740/clock.c file now contains nothing
more of use & so is removed.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10158/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:19 +02:00
Paul Burton ed286ca5d6 MIPS, clk: move jz4740 UDC auto suspend functions to jz4740-cgu
The jz4740-cgu driver already has access to the CGU, so it makes sense
to move the few remaining accesses to the CGU from arch/mips/jz4740
there too. Move the jz4740_clock_udc_{dis,en}able_auto_suspend functions
there for such consistency.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10154/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:18 +02:00
Paul Burton 41dd641e9a MIPS,clk: move jz4740_clock_set_wait_mode to jz4740-cgu
The jz4740-cgu driver already has access to the CGU, so it makes sense
to move the few remaining accesses to the CGU from arch/mips/jz4740
there too. Move jz4740_clock_set_wait_mode for such consistency.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10153/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:17 +02:00
Paul Burton ff1930c6bd MIPS,clk: migrate JZ4740 to common clock framework
Migrate the JZ4740 & the qi_lb60 board to use common clock framework
via the new Ingenic SoC CGU driver. Note that the JZ4740-specific
debugfs code is removed since common clock framework provides its own
debug capabilities.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Co-authored-by: Paul Cercueil <paul@crapouillou.net>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: devicetree@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10151/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:15 +02:00
Paul Burton e06b86a33a MIPS: JZ4740: replace use of jz4740_clock_bdata
Replace uses of the jz4740_clock_bdata struct with calls to clk_get_rate
for the appropriate clock. This is in preparation for migrating the
clocks towards common clock framework & devicetree.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Cc: Apelete Seketeli <apelete@seketeli.net>
Patchwork: https://patchwork.linux-mips.org/patch/10149/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:12 +02:00
Paul Burton 1f4b840983 MIPS: JZ4740: Call jz4740_clock_init earlier
Call jz4740_clock_init before any uses of jz4740_clock_bdata occur. This
is in preparation for replacing uses of that struct with calls to
clk_get_rate, which will allow the clocks to be migrated towards common
clock framework & devicetree.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10148/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:11 +02:00
Paul Burton 44e08e7099 MIPS/IRQCHIP: Move Ingenic SoC intc driver to drivers/irqchip
Move the driver for Ingenic SoC interrupt controllers into
drivers/irqchip where it belongs.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10147/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:10 +02:00
Paul Burton 24ccfa06b7 MIPS: JZ4740: support newer SoC interrupt controllers
Allow the interrupt controllers of the JZ4770, JZ4775 & JZ4780 SoCs to
be probed via devicetree, supporting the 64 interrupts they provide.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10155/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:07 +02:00
Paul Burton 2da018849f MIPS: JZ4740: Avoid JZ4740-specific naming
Rename the functions including jz4740 in their names to be more generic
in preparation for supporting further SoCs, and for moving this
interrupt controller code to drivers/irqchip.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Patchwork: https://patchwork.linux-mips.org/patch/10146/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:06 +02:00
Paul Burton 3aa94590e7 MIPS: JZ4740: read intc base address from DT
Read the base address of the SoC interrupt controller from the device
tree rather than relying upon the JZ4740_INTC_BASE_ADDR macro, in order
to remove the dependency on the asm/mach-jz4740/base.h header.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10145/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:05 +02:00
Paul Burton 943d69c6c2 MIPS: JZ4740: support >32 interrupts
On newer Ingenic SoCs the interrupt controller supports more than 32
interrupts, which it does by duplicating the registers at intervals
of 0x20 bytes within its address space. Add support for an arbitrary
number of interrupts using multiple generic chips, and provide the
number of chips to register from the interrupt controller probe
function.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10141/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:03 +02:00
Paul Burton fe778ece8e MIPS: JZ4740: Remove jz_intc_base global
Avoid the need for the global variable jz_intc_base by introducing a
struct ingenic_intc_data and passing it around as the IRQ handler data.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10144/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:02 +02:00
Paul Burton 2aabd281d6 MIPS: JZ4740: drop intc debugfs code
The debugfs code becomes a nuisance when attempting to avoid globals,
since the interrupt controller probe function run too early for it to be
safe to create the debugfs files. Drop it.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10139/
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:02 +02:00
Paul Burton 638c885185 MIPS: JZ4740: register an irq_domain for the interrupt controller
When probing the interrupt controller, register an IRQ domain such
that the interrupts can be translated by devicetree code & thus used
from devicetree.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10140/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:00 +02:00
Paul Burton 69ce4b2288 MIPS: JZ4740: parse SoC interrupt controller parent IRQ from DT
Rather than hardcoding the IRQ number used to cascade interrupts from
the SoC interrupt controller to the CPU interrupt controller, read that
IRQ number from the DT describing the system.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10137/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:52:59 +02:00
Paul Burton adbdce77cc MIPS: JZ4740: probe interrupt controller via DT
Declare the JZ4740 interrupt controller for probe via DT using the
standard irqchip_init function, and make use of that function to probe
the controller by adding the appropriate node to the JZ4740 dtsi.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10135/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:52:58 +02:00
Paul Burton 0e81db8f5b MIPS: JZ4740: Move arch_init_irq out of arch/mips/jz4740/irq.c
In preparation for moving the JZ4740 interrupt controller driver to
drivers/irqchip, move arch_init_irq into setup.c such that everything
remaining in irq.c is related to said JZ4740 interrupt controller.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10136/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:52:56 +02:00
Paul Burton 2974a35657 MIPS: JZ4740: use generic plat_irq_dispatch
Make use of the generic plat_irq_dispatch function introduced by commit
85f7cdacbb "MIPS: Provide a generic plat_irq_dispatch", in order to
reduce unnecessary code duplication.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10138/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:52:55 +02:00
Paul Burton 8e8261eb6a MIPS: JZ4740: probe CPU interrupt controller via DT
Use the generic irqchip_init function to probe irqchip drivers using DT,
and add the appropriate node to the JZ4740 devicetree in place of the
call to mips_cpu_irq_init.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Patchwork: https://patchwork.linux-mips.org/patch/10166/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:52:54 +02:00
Paul Burton ffb1843d05 MIPS: JZ4740: require & include DT
Require a DT for JZ4740 based systems, and add a stub one for the
qi_lb60 (Ben NanoNote) board. Devices will be migrated to being probed
via this DT over time.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10132/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:52:49 +02:00
Paul Burton de361e8bb9 MIPS: JZ4740: introduce CONFIG_MACH_INGENIC
In preparation for supporting Ingenic SoCs other than the JZ4740,
introduce MACH_INGENIC to Kconfig & move MACH_JZ4740 to a separate
entry selected by the board when appropriate. This allows MACH_INGENIC
to be used to enable things generic across Ingenic SoCs.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Andrew Bresticker <abrestic@chromium.org>
Patchwork: https://patchwork.linux-mips.org/patch/10130/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:52:47 +02:00
Deng-Cheng Zhu 944081ac53 MIPS: jz4740: Implement read_sched_clock
Use jz4740 timer counter for sched_clock source. This implementation will
give high resolution cputime accounting.

Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: macro@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9485/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01 17:21:31 +02:00
Andrew Bresticker b76a4c1ae1 MIPS: Allow platforms to specify the decompressor load address
Platforms which use raw zboot images may need to link the image at
a fixed address if there is no other way to communicate the load
address to the bootloader.  Allow the per-platform Kbuild files
to specify an optional zboot image load address (zload-y) and fall
back to calc_vmlinuz_load_addr if unset.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: James Hartley <james.hartley@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/9566/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-31 12:04:12 +02:00
Linus Torvalds 402521b8f7 MTD updates for 3.20-rc1
NAND:
 
  * Add new Hisilicon NAND driver for Hip04
  * Add default reboot handler, to ensure all outstanding erase transactions
    complete in time
  * jz4740: convert to use GPIO descriptor API
  * Atmel: add support for sama5d4
  * Change default bitflip threshold to 75% of correction strength
  * Miscellaneous cleanups and bugfixes
 
 SPI NOR:
 
  * Freescale QuadSPI:
    - Fix a few probe() and remove() issues
    - Add a MAINTAINERS entry for this driver
    - Tweak transfer size to increase read performance
    - Add suspend/resume support
  * Add Micron quad I/O support
  * ST FSM SPI: miscellaneous fixes
 
 JFFS2:
 
  * gracefully handle corrupted 'offset' field found on flash
 
 Other:
 
  * bcm47xxpart: add tweaks for a few new devices
  * mtdconcat: set return lengths properly for mtd_write_oob()
  * map_ram: enable use with mtdoops
  * maps: support fallback to ROM/UBI for write-protected NOR flash
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU4qf2AAoJEFySrpd9RFgtmo4P/i7KD+Xx12SgBbO+ZUCqBJhh
 X+gorTFr0YpItdn53i1PA8t+WnnXi4BHY07Y8fCj/JL+lxzS+00156o+hsYAFWIl
 TVvjlFHxUYS/rh7plshd5kbEZunlXBOpWw2Qr4dSoIIuOChaRDm9eGNHJ75D/ImO
 Cr+83cyYAm0F+fCHavZKHUq/iFmpDcrt3vbPx/Rv51W+rs/HqPPUcKxt4iaL5Thk
 R0pkcaZHfJ+pkXfjkgRu/L35RLRVxRkycYvLlVSOyE/KqnzE1RRgFeHUYUiPeCem
 xUEoI0OqIYlR5LuKTt/NsBtz1W0Kcm3AcQDC5QliKnbGCwm9nbHAjqfraaZ4Ks2Z
 4YL/2pJCyJFT6NPjsiwiYkJOzJHvN8tLCSIQrXCtAKAkMn8YMHvWIEC/bVsAkpVq
 V3ke3gmZ8bY7sXyY+Fi5WVW4uxKCwSVtGiAw3i74v3z5hZZ818hkbtPc1J0CANiE
 iqbkLMJ5pvWuVT9V2qGlDqK1MDqNXNLXZgBfT9tJx/q5Ptitva79Ift4teRwery2
 5pD3uSaA3vJE2AGHKPfIyTDFqdDDUDCOWJIGbIKsYoKXSAmuOxuWKEhRMWeZMmjo
 o0ZOrhJqBNp4ZqvAxUddUOsGhRKNa3btPoB+IhAQG4+OBwxknsAY39BzPcBjKrkG
 iEKHgRDXXMe8W2wCalLw
 =+nRk
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "NAND:

   - Add new Hisilicon NAND driver for Hip04
   - Add default reboot handler, to ensure all outstanding erase
     transactions complete in time
   - jz4740: convert to use GPIO descriptor API
   - Atmel: add support for sama5d4
   - Change default bitflip threshold to 75% of correction strength
   - Miscellaneous cleanups and bugfixes

  SPI NOR:

   - Freescale QuadSPI:
   - Fix a few probe() and remove() issues
   - Add a MAINTAINERS entry for this driver
   - Tweak transfer size to increase read performance
   - Add suspend/resume support
   - Add Micron quad I/O support
   - ST FSM SPI: miscellaneous fixes

  JFFS2:

   - gracefully handle corrupted 'offset' field found on flash

  Other:

   - bcm47xxpart: add tweaks for a few new devices
   - mtdconcat: set return lengths properly for mtd_write_oob()
   - map_ram: enable use with mtdoops
   - maps: support fallback to ROM/UBI for write-protected NOR flash"

* tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd: (46 commits)
  mtd: hisilicon: && vs & typo
  jffs2: fix handling of corrupted summary length
  mtd: hisilicon: add device tree binding documentation
  mtd: hisilicon: add a new NAND controller driver for hisilicon hip04 Soc
  mtd: avoid registering reboot notifier twice
  mtd: concat: set the return lengths properly
  mtd: kconfig: replace PPC_OF with PPC
  mtd: denali: remove unnecessary stubs
  mtd: nand: remove redundant local variable
  MAINTAINERS: add maintainer entry for FREESCALE QUAD SPI driver
  mtd: fsl-quadspi: improve read performance by increase AHB transfer size
  mtd: fsl-quadspi: Remove unnecessary 'map_failed' label
  mtd: fsl-quadspi: Remove unneeded success/error messages
  mtd: fsl-quadspi: Fix the error paths
  mtd: nand: omap: drop condition with no effect
  mtd: nand: jz4740: Convert to GPIO descriptor API
  mtd: nand: Request strength instead of bytes for soft BCH
  mtd: nand: default bitflip-reporting threshold to 75% of correction strength
  mtd: atmel_nand: introduce a new compatible string for sama5d4 chip
  mtd: atmel_nand: return max bitflips in all sectors in pmecc_correction()
  ...
2015-02-18 08:01:44 -08:00
Lars-Peter Clausen cd145af998 mtd: nand: jz4740: Convert to GPIO descriptor API
Use the GPIO descriptor API instead of the deprecated legacy GPIO API to
manage the busy GPIO.

The patch updates both the jz4740 nand driver and the only user of the driver
the qi-lb60 board driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-02-02 01:04:36 -08:00
Brian Norris 942e22dff2 MIPS: JZ4740: Fixup #include's (sparse)
Fixes sparse warnings:

  arch/mips/jz4740/irq.c:63:6: warning: symbol 'jz4740_irq_suspend' was not declared. Should it be static?
  arch/mips/jz4740/irq.c:69:6: warning: symbol 'jz4740_irq_resume' was not declared. Should it be static?

Also, I've seen some elusive build errors on my automated build test
where JZ4740_IRQ_BASE and NR_IRQS are missing, but I can't reproduce
them manually for some reason. Anyway, mach-jz4740/irq.h should help us
avoid relying on some implicit include.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8724/
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-01-13 15:53:09 +01:00
Ralf Baechle 15d45cce3a MIPS: Replace use of phys_t with phys_addr_t.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24 22:47:31 +01:00
Linus Torvalds 06b49ea43c This is the bulk of GPIO changes for the v3.17 development
cycle, and this time we got a lot of action going on and
 it will continue:
 
 - The core GPIO library implementation has been split up in
   three different files:
   - gpiolib.c for the latest and greatest and shiny GPIO
     library code using GPIO descriptors only
   - gpiolib-legacy.c for the old integer number space API
     that we are phasing out gradually
   - gpiolib-sysfs.c for the sysfs interface that we are
     not entirely happy with, but has to live on for
     ABI compatibility
 
 - Add a flags argument to *gpiod_get* functions, with some
   backward-compatibility macros to ease transitions. We
   should have had the flags there from the beginning it
   seems, now we need to clean up the mess. There is a plan
   on how to move forward here devised by Alexandre Courbot
   and Mark Brown.
 
 - Split off a special <linux/gpio/machine.h> header for the
   board gpio table registration, as per example from the
   regulator subsystem.
 
 - Start to kill off the return value from gpiochip_remove()
   by removing the __must_check attribute and removing all
   checks inside the drivers/gpio directory. The rationale
   is: well what were we supposed to do if there is an error
   code? Not much: print an error message. And gpiolib already
   does that. So make this function return void eventually.
 
 - Some cleanups of hairy gpiolib code, make some functions
   not to be used outside the library private and make sure
   they are not exported, remove gpiod_lock/unlock_as_irq()
   as the existing function is for driver-internal use and
   fine as it is, delete gpio_ensure_requested() as it is
   not meaningful anymore.
 
 - Support the GPIOF_ACTIVE_LOW flag from gpio_request_one()
   function calls, which is logical since this is already
   supported when referencing GPIOs from e.g. device trees.
 
 - Switch STMPE, intel-mid, lynxpoint and ACPI (!) to use
   the gpiolib irqchip helpers cutting down on GPIO irqchip
   boilerplate a bit more.
 
 - New driver for the Zynq GPIO block.
 
 - The usual incremental improvements around a bunch of
   drivers.
 
 - Janitorial syntactic and semantic cleanups by Jingoo Han,
   and Rickard Strandqvist especially.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT5Ji9AAoJEEEQszewGV1zch8QAKp67+8ScxRBf/7RCSV6U/dy
 i7kt+nP4au/TScwtjbX264DM8hroW7BzN+GqF10NEFeGkYDR+42lMav9PrNjtKtk
 ojQPWdoGWzwwL0wa4j9rsuG/pRnbAEgDWPb+EkFdHQsLl6h71fyVoLOK+gKwJFyn
 aPYGXyNbT1FN38oj1rarENiOUxM7VMXvcJFfvDYFdDDhCS4PLYPOMw0lrsGtsHMZ
 epDa4z3yt4zHgYiUIT578nQ7EkIbGN3goywk3NQ+9WDQG+sLFHh4BdqcRKg6b9VM
 I64+47uNQxkyvWCvcLma5ziqvtNQk113986g+cv5YeTh18Ajyio1kxEIZM181eBk
 ITUPGrAorWHPLGNbe3psLmtK3+/BwmWIurPmHpckuW8d2JWWSVe0oepkUuqDwu/w
 lUB5KtM0joFOr5k61fj5tCKxH344jc1zvHJ/N+bVYilbOMvunWzuMJlc4hADIGC2
 1uxUAcPbYUAphGaxhdMBca9ellm0lWG19Gj5TtdGbRtNgp6R2qrwI66DDzk+1kLR
 8Szx6KHQdEHFTlCLKSIAMv33p1ClfmNikhdicT3urwR8PeXmmTR1pD7kGmVTDDZa
 gXSU5EilgGpak+77j/GZ2Ivp0Qt5M97UwWlZ7zTp++T1ZY+wwTHJI/09qcoWYjdz
 IpZRIqrQchalbscpn3LY
 =e+d6
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO update from Linus Walleij:
 "This is the bulk of GPIO changes for the v3.17 development cycle, and
  this time we got a lot of action going on and it will continue:

   - The core GPIO library implementation has been split up in three
     different files:
     - gpiolib.c for the latest and greatest and shiny GPIO library code
       using GPIO descriptors only
     - gpiolib-legacy.c for the old integer number space API that we are
       phasing out gradually
     - gpiolib-sysfs.c for the sysfs interface that we are not entirely
       happy with, but has to live on for ABI compatibility

   - Add a flags argument to *gpiod_get* functions, with some
     backward-compatibility macros to ease transitions.  We should have
     had the flags there from the beginning it seems, now we need to
     clean up the mess.  There is a plan on how to move forward here
     devised by Alexandre Courbot and Mark Brown

   - Split off a special <linux/gpio/machine.h> header for the board
     gpio table registration, as per example from the regulator
     subsystem

   - Start to kill off the return value from gpiochip_remove() by
     removing the __must_check attribute and removing all checks inside
     the drivers/gpio directory.  The rationale is: well what were we
     supposed to do if there is an error code? Not much: print an error
     message.  And gpiolib already does that.  So make this function
     return void eventually

   - Some cleanups of hairy gpiolib code, make some functions not to be
     used outside the library private and make sure they are not
     exported, remove gpiod_lock/unlock_as_irq() as the existing
     function is for driver-internal use and fine as it is, delete
     gpio_ensure_requested() as it is not meaningful anymore

   - Support the GPIOF_ACTIVE_LOW flag from gpio_request_one() function
     calls, which is logical since this is already supported when
     referencing GPIOs from e.g. device trees

   - Switch STMPE, intel-mid, lynxpoint and ACPI (!) to use the gpiolib
     irqchip helpers cutting down on GPIO irqchip boilerplate a bit more

   - New driver for the Zynq GPIO block

   - The usual incremental improvements around a bunch of drivers

   - Janitorial syntactic and semantic cleanups by Jingoo Han, and
     Rickard Strandqvist especially"

* tag 'gpio-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (37 commits)
  MAINTAINERS: update GPIO include files
  gpio: add missing includes in machine.h
  gpio: add flags argument to gpiod_get*() functions
  MAINTAINERS: Update Samsung pin control entry
  gpio / ACPI: Move event handling registration to gpiolib irqchip helpers
  gpio: lynxpoint: Convert to use gpiolib irqchip
  gpio: split gpiod board registration into machine header
  gpio: remove gpio_ensure_requested()
  gpio: remove useless check in gpiolib_sysfs_init()
  gpiolib: Export gpiochip_request_own_desc and gpiochip_free_own_desc
  gpio: move gpio_ensure_requested() into legacy C file
  gpio: remove gpiod_lock/unlock_as_irq()
  gpio: make gpiochip_get_desc() gpiolib-private
  gpio: simplify gpiochip_export()
  gpio: remove export of private of_get_named_gpio_flags()
  gpio: Add support for GPIOF_ACTIVE_LOW to gpio_request_one functions
  gpio: zynq: Clear pending interrupt when enabling a IRQ
  gpio: drop retval check enforcing from gpiochip_remove()
  gpio: remove all usage of gpio_remove retval in driver/gpio
  devicetree: Add Zynq GPIO devicetree bindings documentation
  ...
2014-08-08 18:00:35 -07:00
Ralf Baechle 475d5928b7 Merge branch '3.16-fixes' into mips-for-linux-next 2014-08-02 00:07:03 +02:00
Fabian Frederick c6b7b9f290 MIPS: jz4740: remove unnecessary null test before debugfs_remove
Fix checkpatch warning:
WARNING: debugfs_remove(NULL) is safe this check is probably not required

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7225/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02 00:06:47 +02:00
Apelete Seketeli c7fb97d65a MIPS: Jz4740: Rename usb_nop_xceiv to usb_phy_generic
Rename usb_nop_xceiv to usb_phy_generic in platform data to match the
name change of the nop transceiver driver in commit 4525bee (usb: phy:
rename usb_nop_xceiv to usb_phy_generic).

The name change induced a kernel panic due to an unhandled kernel
unaligned access while trying to dereference musb->xceiv->io_ops in
musb_init_controller().

Signed-off-by: Apelete Seketeli <apelete@seketeli.net>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: John Crispin <blogic@openwrt.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7263/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-01 18:37:42 +02:00
Linus Walleij 0a6d315827 gpio: split gpiod board registration into machine header
As per example from the regulator subsystem: put all defines and
functions related to registering board info for GPIO descriptors
into a separate <linux/gpio/machine.h> header.

Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-28 12:23:35 +02:00