Intel PT uses IP compression based on the last IP. For decoding
purposes, 'last IP' is considered to be reset to zero whenever there is
a synchronization packet (PSB). The decoder wasn't doing that, and was
treating the zero value to mean that there was no last IP, whereas
compression can be done against the zero value. Fix by setting last_ip
to zero when a PSB is received and keep track of have_last_ip.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1495786658-18063-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The decoder uses its current timestamp in samples. Usually that is a
timestamp that has already passed, but in some cases it is a timestamp
for a branch that the decoder is walking towards, and consequently
hasn't reached. Improve that situation by using the pkt_state to
determine when to use the current or previous timestamp.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1495786658-18063-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Porting PPC to libdw only needs an architecture-specific hook to move
the register state from perf to libdw.
The ARM and x86 architectures already use libdw, and it is useful to
have as much common code for the unwinder as possible. Mark Wielaard
has contributed a frame-based unwinder to libdw, so that unwinding works
even for binaries that do not have CFI information. In addition,
libunwind is always preferred to libdw by the build machinery so this
cannot introduce regressions on machines that have both libunwind and
libdw installed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1496312681-20133-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implementing a new --smi-cost mode in perf stat to measure SMI cost.
During the measurement, the /sys/device/cpu/freeze_on_smi will be set.
The measurement can be done with one counter (unhalted core cycles), and
two free running MSR counters (IA32_APERF and SMI_COUNT).
In practice, the percentages of SMI core cycles should be more useful
than absolute value. So the output will be the percentage of SMI core
cycles and SMI#. metric_only will be set by default.
SMI cycles% = (aperf - unhalted core cycles) / aperf
Here is an example output.
Performance counter stats for 'sudo echo ':
SMI cycles% SMI#
0.1% 1
0.010858678 seconds time elapsed
Users who wants to get the actual value can apply additional
--no-metric-only.
Signed-off-by: Kan Liang <Kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1495825538-5230-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add sysfs__write_int() to ease up writing int to sysfs. New interface
is:
int sysfs__write_int(const char *entry, int value);
Also, introducing filename__write_int() which is useful for new helpers
to write sysctl values.
Signed-off-by: Kan Liang <Kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1495825538-5230-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This test checks the response of the system clock to frequency
steps made with adjtimex(). The frequency error and stability of
the CLOCK_MONOTONIC clock relative to the CLOCK_MONOTONIC_RAW clock
is measured in two intervals following the step. The test fails if
values from the second interval exceed specified limits.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
When the first timestamp in the list of clock readings was later than
the second timestamp and all other timestamps were in order, the
inconsistency was not reported because the index of the out-of-order
timestamp was equal to the default value.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Add the beginnings of a testsuite for tc functionality in the kernel.
These are a series of unit tests that use the tc executable and verify
the success of those commands by checking both the exit codes and the
output from tc's 'show' operation.
To run the tests:
# cd tools/testing/selftests/tc-testing
# sudo ./tdc.py
You can specify the tc executable to use with the -p argument on the command
line or editing the 'TC' variable in tdc_config.py. Refer to the README for
full details on how to run.
The initial complement of test cases are limited mostly to tc actions. Test
cases are most welcome; see the creating-testcases subdirectory for help
in creating them.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Curious as to what this was for I looked at /usr/include/ and only some
python headers define this, and it ends up being to enable "extensions"
on some old OSes:
/* Enable extensions on AIX 3, Interix */
I guess we can remove this one safely.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-omnundlxo2brs552bdl6m0j1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While trying to reduce util.[ch] I noticed that fetch_kernel_version()
and fetch_ubuntu_kernel_version() do lots of operations only to check if
they are needed, i.e. it checks if the pointer where to return the
kernel version is NULL only after obtaining the kernel version from
/proc/version_signature or by parsing the results from uname().
Do it earlier not to confuse people reading this code in the future :-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-i94qwyekk4tzbu0b9ce1r1mz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And make it static, nobody else uses it, if we ever need it in more
places we can carve a new source file for process related methods,
for now lets reduce util.{c,h} a tad more.
Link: http://lkml.kernel.org/n/tip-zgb28rllvypjibw52aaz9p15@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
- Allow adding and removing fields to the default 'perf script' columns,
using + or - as field prefixes to do so (Andi Kleen)
- Display titles in left frame in the annotate browser (Jin Yao)
- Allow resolving the DSO name with 'perf script -F brstack{sym,off},dso'
(Mark Santaniello)
- Support function filtering in 'perf ftrace' (Namhyung Kim)
- Allow specifying function call depth in 'perf ftrace' (Namhyumg Kim)
Infrastructure:
- Adopt __noreturn, __printf, __scanf, noinline, __packed and __aligned
__alignment__(()) markers, to make the tools/ source code base to be
more compact and look more like kernel code (Arnaldo Carvalho de Melo)
- Remove unnecessary check in annotate_browser_write() (Jin Yao)
- Return arch from symbol__disassemble() so that callers, such as
the annotate TUI browser to use arch specific formattings, such
as the upcoming instruction micro-op fusion on Intel Core (Jin Yao)
- Remove superfluous check before use in the coresight code base (Kim
Phillips)
- Remove unused SAMPLE_SIZE defines and BTS priv array (Kim Phillips)
- Error handling fix/tidy ups in 'perf config' (Taeung Song)
- Avoid error in the BPF proggie built with clang in 'perf test llvm'
when PROFILE_ALL_BRANCHES is set (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=wK/k
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.13-20170719' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Allow adding and removing fields to the default 'perf script' columns,
using + or - as field prefixes to do so (Andi Kleen)
- Display titles in left frame in the annotate browser (Jin Yao)
- Allow resolving the DSO name with 'perf script -F brstack{sym,off},dso'
(Mark Santaniello)
- Support function filtering in 'perf ftrace' (Namhyung Kim)
- Allow specifying function call depth in 'perf ftrace' (Namhyumg Kim)
Infrastructure changes:
- Adopt __noreturn, __printf, __scanf, noinline, __packed and __aligned
__alignment__(()) markers, to make the tools/ source code base to be
more compact and look more like kernel code (Arnaldo Carvalho de Melo)
- Remove unnecessary check in annotate_browser_write() (Jin Yao)
- Return arch from symbol__disassemble() so that callers, such as
the annotate TUI browser to use arch specific formattings, such
as the upcoming instruction micro-op fusion on Intel Core (Jin Yao)
- Remove superfluous check before use in the coresight code base (Kim
Phillips)
- Remove unused SAMPLE_SIZE defines and BTS priv array (Kim Phillips)
- Error handling fix/tidy ups in 'perf config' (Taeung Song)
- Avoid error in the BPF proggie built with clang in 'perf test llvm'
when PROFILE_ALL_BRANCHES is set (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This time around we have a total of 57 non-merge commits. A list of
most important changes follows:
- Improvements to dwc3 tracing interface
- Initial dual-role support for dwc3
- Improvements to how we handle DMA resources in dwc3
- A new f_uac1 implementation which much more flexible
- Removal of AVR32 bits
- Improvements to f_mass_storage driver
-----BEGIN PGP SIGNATURE-----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=v6a5
-----END PGP SIGNATURE-----
Merge tag 'usb-for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-testing
Felipe writes:
usb: changes for v4.13 merge window
This time around we have a total of 57 non-merge commits. A list of
most important changes follows:
- Improvements to dwc3 tracing interface
- Initial dual-role support for dwc3
- Improvements to how we handle DMA resources in dwc3
- A new f_uac1 implementation which much more flexible
- Removal of AVR32 bits
- Improvements to f_mass_storage driver
To simplify the code related to 'ret' variable in cmd_config(),
initialize 'ret' with -1 instead of 0 and use goto to perform resource
release at the end of the function, setting ret to zero just before the
out_err label, as usual in the kernel sources.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1497671202-20495-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
show_spec_config() and set_config() can be called multiple times
in the loop in cmd_config().
However, The error cases of them wasn't checked, so fix it.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1497671197-20450-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -D/--graph-depth option is to set max graph depth. The following
example traces max 2-depth of page fault handler.
$ sudo perf ftrace -G __do_page_fault -D 2 -- hello
...
0) | __do_page_fault() {
0) 0.063 us | down_read_trylock();
0) 0.251 us | find_vma();
0) 5.374 us | handle_mm_fault();
0) 0.054 us | up_read();
0) 7.463 us | }
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170618142302.25390-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf ftrace' command fails to reset tracer after finishing
recording like below:
$ sudo perf ftrace -v hello
write 'nop' to tracing/current_tracer failed: Device or resource busy
...
This is because the trace_pipe file is open in pager process. Move the
pager setup to before opening the file.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Fixes: 583359646f ("perf ftrace: Use pager for displaying result")
Link: http://lkml.kernel.org/r/20170618142302.25390-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'd be better for debugging to show an error message when it fails to
setup ftrace for some reason.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170618142302.25390-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution of this program with perf record -b.
Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary. Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
$ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf script can report the dso for "addr" and "ip" fields.
This adds the same support for the "brstack" and "brstacksym" fields.
This can be helpful for AutoFDO: we can ignore LBR entries unless the
source and target address are both in the target module we are about to
build.
I built a small test akin to "while(1) { do_nothing(); }" where the
do_nothing function is loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution with perf record -b. Using the new perf script
functionality I can easily find cases where there was a transition from one
dso to another:
$ perf record -a -b -- sleep 5
[ perf record: Woken up 55 times to write data ]
[ perf record: Captured and wrote 18.815 MB perf.data (43593 samples) ]
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-1-marksan@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'if' keyword is a define that expands to complex code when
CONFIG_PROFILE_ALL_BRANCHES is selected, which causes a 'perf test LLVM'
failure like:
$ ./perf test LLVM
35: LLVM search and compile :
35.1: Basic BPF llvm compile : Ok
35.2: kbuild searching : Ok
35.3: Compile source for BPF prologue generation: FAILED!
35.4: Compile source for BPF relocation : Skip
The only affected test case is bpf-script-test-prologue.c
because it uses kernel headers and has 'if' inside.
This patch undefines 'if' to make it passes perf test.
More detailed analysis from a message in this thread, also by Wang:
The problem is caused by following relocation information:
$ readelf -a ./llvmsubtest3
...
[ 5] _ftrace_branch PROGBITS 0000000000000000 00000260
00000000000000a0 0000000000000000 WA 0 0 4
...
Relocation section '.relfunc=null_lseek file->f_mode offset orig' at
offset 0x490 contains 4 entries:
Offset Info Type Sym. Value Sym. Name
000000000038 000b00000001 unrecognized: 1 0000000000000000 _ftrace_branch
0000000000b0 000b00000001 unrecognized: 1 0000000000000000 _ftrace_branch
000000000128 000b00000001 unrecognized: 1 0000000000000000 _ftrace_branch
0000000001c0 000b00000001 unrecognized: 1 0000000000000000 _ftrace_branch
Relocation section '.rel_ftrace_branch' at offset 0x4d0 contains 8 entries:
Offset Info Type Sym. Value Sym. Name
000000000000 000200000001 unrecognized: 1 0000000000000000 .L__func__.bpf_func__n
000000000008 000100000001 unrecognized: 1 0000000000000015 .L.str
000000000028 000200000001 unrecognized: 1 0000000000000000 .L__func__.bpf_func__n
000000000030 000100000001 unrecognized: 1 0000000000000015 .L.str
000000000050 000200000001 unrecognized: 1 0000000000000000 .L__func__.bpf_func__n
000000000058 000100000001 unrecognized: 1 0000000000000015 .L.str
000000000078 000200000001 unrecognized: 1 0000000000000000 .L__func__.bpf_func__n
000000000080 000100000001 unrecognized: 1 0000000000000015 .L.str
...
So I think the failure is because you enabled CONFIG_PROFILE_ALL_BRANCHES.
I can reproduce your buggy result by selecting
CONFIG_PROFILE_ALL_BRANCHES in my kbuild:
$ ./perf test LLVM
35: LLVM search and compile :
35.1: Basic BPF llvm compile : Ok
35.2: kbuild searching : Ok
35.3: Compile source for BPF prologue generation: FAILED!
35.4: Compile source for BPF relocation : Skip
Simply undef CONFIG_PROFILE_ALL_BRANCHES in clang opts not working
because it is introduced by "#include <uapi/linux/fs.h>", which override
cmdline options. So I think the best way is to undefine 'if' inside BPF
script.
Reported-and-Tested-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/20170620183203.2517-1-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In annotate browser, we will add support to check fused instructions.
While this is x86-specific feature so we need the annotate browser to
know what the arch it runs on.
symbol__disassemble() has figured out the arch. This patch just lets the
arch return from symbol__disassemble and save the arch in annotate
browser.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1497840958-4759-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These defines were probably dragged in from sampling support in earlier
patches. They can be put back when needed.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170616112339.3fb6986e4ff33e353008244b@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cs_etm_evsel variable is guaranteed to be set at this point in
cs_etm_recording_options().
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20170615125521.80cc128dc856bc1f2e61b730@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To have a more compact way to ask the compiler to use a specific
alignment, making tools/ look more like kernel source code.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8jiem6ubg9rlpbs7c2p900no@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To have a more compact way to ask the compiler to not insert alignment
paddings in a struct, making tools/ look more like kernel source code.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-byp46nr7hsxvvyc9oupfb40q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To have a more compact way to ask the compiler not to inline a function
and to make tools/ source code look like kernel code.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bis4pqxegt6gbm5dlqs937tn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of defining __unused or redefining __maybe_unused.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4eleto5pih31jw1q4dypm9pf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To have a more compact way to ask the compiler to perform scanf like
argument validation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-yzqrhfjrn26lqqtwf55egg0h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To have a more compact way to ask the compiler to perform printf like
vargargs validation.
v2: Fixed up build on arm, squashing a patch by Kim Phillips, thanks!
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dopkqmmuqs04cxzql0024nnu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The code mistakenly prints the local perf results for the remote test
so the script reports identical results for both directions. Fix this
by ensuring we print the remote result.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Fixes: a9c59ef774 ("ntb_test: Add a selftest script for the NTB subsystem")
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
To have a more compact way to specify that a function doesn't return,
instead of the open coded:
__attribute__((noreturn))
And use it instead of the tools/perf/ specific variation, NORETURN.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-l0y144qzixcy5t4c6i7pdiqj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With 'perf script' it is common that we just want to add or remove a field.
Currently this requires figuring out the long list of default fields and
specifying them first, and then adding/removing the new field.
This patch adds a new + - syntax to merely add or remove fields,
that allows more succint and clearer command lines
For example to remove the comm field from PMU samples:
Previously
$ perf script -F tid,cpu,time,event,sym,ip,dso,period | head -1
swapper 0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
with the new syntax
perf script -F -comm | head -1
0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
The new syntax cannot be mixed with normal overriding.
v2: Fix example in description. Use tid vs pid. No functional changes.
v3: Don't skip initialization when user specified explicit type.
v4: Rebase. Remove empty line.
Committer testing:
# perf record -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.748 MB perf.data (14 samples) ]
Without a explicit field list specified via -F, defaults to:
# perf script | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Which is equivalent to:
# perf script -F comm,tid,cpu,time,period,event,ip,sym,dso | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
So if we want to remove the comm, as in your original example, we would have to
figure out the default field list and remove ' comm' from it:
# perf script -F tid,cpu,time,period,event,ip,sym,dso | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
With your patch this becomes simpler, one can remove fields by prefixing them
with '-':
# perf script -F -comm | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/r/20170602154810.15875-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The annotate browser is divided into 2 frames. Left frame contains 3
columns (some platforms only have one column).
For example:
│26 int compute_flag()
│27 {
22.80 1.20 │ sub $0x8,%rsp
│25 int i;
│
│27 i = rand() % 2;
22.78 1.20 1 │ → callq rand@plt
While it's hard for user to understand what the data is.
This patch adds the titles "Percent", "IPC" and "Cycle" on columns.
Percent IPC Cycle │
│25 __attribute__((noinline))
│26 int compute_flag()
│27 {
22.80 1.20 │ sub $0x8,%rsp
│25 int i;
│
│27 i = rand() % 2;
22.78 1.20 1 │ → callq rand@plt
The titles are displayed at row 0 of annotate browser if row 0 doesn't
have values of percent, ipc and cycle.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1493909895-9668-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In annotate_browser_write(),
if (dl->offset != -1 && percent_max != 0.0) {
if (percent_max != 0.0) {
...
}
...
}
The second check of (percent_max != 0.0) is not necessary, remove it.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1493909895-9668-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Thomas Gleixner:
"Three fixes for the perf user space side:
- Fix the probing of precise_ip level, which got broken recently for
x86.
- Unbreak the ARCH=x86_64 build
- Report module before trying to unwind into the module code, which
avoids broken stack frames displayed"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf unwind: Report module before querying isactivation in dwfl unwind
perf tools: Fix build with ARCH=x86_64
perf evsel: Fix probing of precise_ip level for default cycles event
Pull objtool fix from Thomas Gleixner:
"A single fix which adds fortify_panic to the list of no return
functions"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add fortify_panic as __noreturn function
CONFIG_FORTIFY_SOURCE=y implements fortify_panic() as a __noreturn function,
so objtool needs to know about it too.
Suggested-by: Daniel Micay <danielmicay@gmail.com>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1497532835-32704-1-git-send-email-jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make membarrier test names more informative.
Signed-off-by: Alice Ferrazzi <alice.ferrazzi@gmail.com>
Signed-off-by: Paul Elder <paul.elder@pitt.edu>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Make the three tests that did use the old ksft_ext_skip()
(breakpoints/breakpoint_test_arm64, breakpoints/step_after_suspend_test,
and membarrier_test) use the new one, with an output for the
reason for skipping all the tests.
Signed-off-by: Paul Elder <paul.elder@pitt.edu>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Make ksft_exit_skip() input an optional message string as the reason
for skipping all the tests and outputs it prior to exiting.
Signed-off-by: Paul Elder <paul.elder@pitt.edu>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The root cause of panic is the num_pm of nfit_test1 is wrong.
Though 1 is specified for num_pm at nfit_test_init(), it must be 2,
because nfit_test1->spa_set[] array has 2 elements.
Since the array is smaller than expected, the driver breaks other area.
(it is often the link list of devres).
As a result, panic occurs like the following example.
CPU: 4 PID: 2233 Comm: lt-libndctl Tainted: G O 4.12.0-rc1+ #12
RIP: 0010:__list_del_entry_valid+0x6c/0xa0
Call Trace:
release_nodes+0x76/0x260
devres_release_all+0x3c/0x50
device_release_driver_internal+0x159/0x200
device_release_driver+0x12/0x20
bus_remove_device+0xfd/0x170
device_del+0x1e8/0x330
platform_device_del+0x28/0x90
platform_device_unregister+0x12/0x30
nfit_test_exit+0x2a/0x93b [nfit_test]
Cc: <stable@vger.kernel.org>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull networking fixes from David Miller:
1) The netlink attribute passed in to dev_set_alias() is not
necessarily NULL terminated, don't use strlcpy() on it. From
Alexander Potapenko.
2) Fix implementation of atomics in arm64 bpf JIT, from Daniel
Borkmann.
3) Correct the release of netdevs and driver private data in certain
circumstances.
4) Sanitize netlink message length properly in decnet, from Mateusz
Jurczyk.
5) Don't leak kernel data in rtnl_fill_vfinfo() netlink blobs. From
Yuval Mintz.
6) Hash secret is never initialized in ipv6 ILA translation code, from
Arnd Bergmann. I guess those clang warnings about unused inline
functions are useful for something!
7) Fix endian selection in bpf_endian.h, from Daniel Borkmann.
8) Sanitize sockaddr length before dereferncing any fields in AF_UNIX
and CAIF. From Mateusz Jurczyk.
9) Fix timestamping for GMAC3 chips in stmmac driver, from Mario
Molitor.
10) Do not leak netdev on dev_alloc_name() errors in mac80211, from
Johannes Berg.
11) Fix locking in sctp_for_each_endpoint(), from Xin Long.
12) Fix wrong memset size on 32-bit in snmp6, from Christian Perle.
13) Fix use after free in ip_mc_clear_src(), from WANG Cong.
14) Fix regressions caused by ICMP rate limiting changes in 4.11, from
Jesper Dangaard Brouer.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits)
i40e: Fix a sleep-in-atomic bug
net: don't global ICMP rate limit packets originating from loopback
net/act_pedit: fix an error code
net: update undefined ->ndo_change_mtu() comment
net_sched: move tcf_lock down after gen_replace_estimator()
caif: Add sockaddr length check before accessing sa_family in connect handler
qed: fix dump of context data
qmi_wwan: new Telewell and Sierra device IDs
net: phy: Fix MDIO_THUNDER dependencies
netconsole: Remove duplicate "netconsole: " logging prefix
igmp: acquire pmc lock for ip_mc_clear_src()
r8152: give the device version
net: rps: fix uninitialized symbol warning
mac80211: don't send SMPS action frame in AP mode when not needed
mac80211/wpa: use constant time memory comparison for MACs
mac80211: set bss_info data before configuring the channel
mac80211: remove 5/10 MHz rate code from station MLME
mac80211: Fix incorrect condition when checking rx timestamp
mac80211: don't look at the PM bit of BAR frames
i40e: fix handling of HW ATR eviction
...
1. Add the TAP13 header
2. remove variable data from the test description line
3. move the plan count to the end of the file, for consistency with
other kselftests
4. convert memory data from diagnostic (comment) format, to a YAML block
Signed-off-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Dynamically allocate memory so that JIT images larger than the size of
the statically allocated array can be handled.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test cases in test_verifier and test_progs.
Negative tests are added in test_verifier as well.
The test in test_progs will compare the value of narrower ctx field
load result vs. the masked value of normal full-field load result,
and will fail if they are not the same.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, verifier will reject a program if it contains an
narrower load from the bpf context structure. For example,
__u8 h = __sk_buff->hash, or
__u16 p = __sk_buff->protocol
__u32 sample_period = bpf_perf_event_data->sample_period
which are narrower loads of 4-byte or 8-byte field.
This patch solves the issue by:
. Introduce a new parameter ctx_field_size to carry the
field size of narrower load from prog type
specific *__is_valid_access validator back to verifier.
. The non-zero ctx_field_size for a memory access indicates
(1). underlying prog type specific convert_ctx_accesses
supporting non-whole-field access
(2). the current insn is a narrower or whole field access.
. In verifier, for such loads where load memory size is
less than ctx_field_size, verifier transforms it
to a full field load followed by proper masking.
. Currently, __sk_buff and bpf_perf_event_data->sample_period
are supporting narrowing loads.
. Narrower stores are still not allowed as typical ctx stores
are just normal stores.
Because of this change, some tests in verifier will fail and
these tests are removed. As a bonus, rename some out of bound
__sk_buff->cb access to proper field name and remove two
redundant "skb cb oob" tests.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With commit: 0a943cb10c (tools build: Add HOSTARCH Makefile variable)
when building for ARCH=x86_64, ARCH=x86_64 is passed to perf instead of
ARCH=x86, so the perf build process searchs header files from
tools/arch/x86_64/include, which doesn't exist.
The following build failure is seen:
In file included from util/event.c:2:0:
tools/include/uapi/linux/mman.h:4:27: fatal error: uapi/asm/mman.h: No such file or directory
compilation terminated.
Fix this issue by using SRCARCH instead of ARCH in perf, just like the
main kernel Makefile and tools/objtool's.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Eugeniu Rosca <erosca@de.adit-jv.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Rui Teng <rui.teng@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 0a943cb10c ("tools build: Add HOSTARCH Makefile variable")
Link: http://lkml.kernel.org/r/1491793357-14977-2-git-send-email-jiada_wang@mentor.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since commit 18e7a45af9 ("perf/x86: Reject non sampling events with
precise_ip") returns -EINVAL for sys_perf_event_open() with an attribute
with (attr.precise_ip > 0 && attr.sample_period == 0), just like is done
in the routine used to probe the max precise level when no events were
passed to 'perf record' or 'perf top', i.e.:
perf_evsel__new_cycles()
perf_event_attr__set_max_precise_ip()
The x86 code, in x86_pmu_hw_config(), which is called all the way from
sys_perf_event_open() did, starting with the aforementioned commit:
/* There's no sense in having PEBS for non sampling events: */
if (!is_sampling_event(event))
return -EINVAL;
Which makes it fail for cycles:ppp, cycles:pp and cycles:p, always using
just the non precise cycles variant.
To make sure that this is the case, I tested it, before this patch,
with:
# perf probe -L x86_pmu_hw_config
<x86_pmu_hw_config@/home/acme/git/linux/arch/x86/events/core.c:0>
0 int x86_pmu_hw_config(struct perf_event *event)
1 {
2 if (event->attr.precise_ip) {
<SNIP>
17 if (event->attr.precise_ip > precise)
18 return -EOPNOTSUPP;
/* There's no sense in having PEBS for non sampling events: */
21 if (!is_sampling_event(event))
22 return -EINVAL;
}
<SNIP>
# perf probe x86_pmu_hw_config:22
Added new events:
probe:x86_pmu_hw_config (on x86_pmu_hw_config:22)
probe:x86_pmu_hw_config_1 (on x86_pmu_hw_config:22)
You can now use it in all perf tools, such as:
perf record -e probe:x86_pmu_hw_config_1 -aR sleep 1
# perf trace -e perf_event_open,probe:x86_pmu_hwconfig*/max-stack=16/ perf record usleep 1
0.000 ( 0.015 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ...
0.015 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1))
x86_pmu_hw_config ([kernel.kallsyms])
hsw_hw_config ([kernel.kallsyms])
x86_pmu_event_init ([kernel.kallsyms])
perf_try_init_event ([kernel.kallsyms])
perf_event_alloc ([kernel.kallsyms])
SYSC_perf_event_open ([kernel.kallsyms])
sys_perf_event_open ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
return_from_SYSCALL_64 ([kernel.kallsyms])
syscall (/usr/lib64/libc-2.24.so)
perf_event_attr__set_max_precise_ip (/home/acme/bin/perf)
perf_evsel__new_cycles (/home/acme/bin/perf)
perf_evlist__add_default (/home/acme/bin/perf)
cmd_record (/home/acme/bin/perf)
run_builtin (/home/acme/bin/perf)
handle_internal_command (/home/acme/bin/perf)
0.000 ( 0.021 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument
0.023 ( 0.002 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ...
0.025 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1))
x86_pmu_hw_config ([kernel.kallsyms])
hsw_hw_config ([kernel.kallsyms])
x86_pmu_event_init ([kernel.kallsyms])
perf_try_init_event ([kernel.kallsyms])
perf_event_alloc ([kernel.kallsyms])
SYSC_perf_event_open ([kernel.kallsyms])
sys_perf_event_open ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
return_from_SYSCALL_64 ([kernel.kallsyms])
syscall (/usr/lib64/libc-2.24.so)
perf_event_attr__set_max_precise_ip (/home/acme/bin/perf)
perf_evsel__new_cycles (/home/acme/bin/perf)
perf_evlist__add_default (/home/acme/bin/perf)
cmd_record (/home/acme/bin/perf)
run_builtin (/home/acme/bin/perf)
handle_internal_command (/home/acme/bin/perf)
0.023 ( 0.004 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument
0.028 ( 0.002 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ...
0.030 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1))
x86_pmu_hw_config ([kernel.kallsyms])
hsw_hw_config ([kernel.kallsyms])
x86_pmu_event_init ([kernel.kallsyms])
perf_try_init_event ([kernel.kallsyms])
perf_event_alloc ([kernel.kallsyms])
SYSC_perf_event_open ([kernel.kallsyms])
sys_perf_event_open ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
return_from_SYSCALL_64 ([kernel.kallsyms])
syscall (/usr/lib64/libc-2.24.so)
perf_event_attr__set_max_precise_ip (/home/acme/bin/perf)
perf_evsel__new_cycles (/home/acme/bin/perf)
perf_evlist__add_default (/home/acme/bin/perf)
cmd_record (/home/acme/bin/perf)
run_builtin (/home/acme/bin/perf)
handle_internal_command (/home/acme/bin/perf)
0.028 ( 0.004 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument
41.018 ( 0.012 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8b5dd0, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
41.065 ( 0.011 ms): perf/4150 perf_event_open(attr_uptr: 0x3c7db78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
41.080 ( 0.006 ms): perf/4150 perf_event_open(attr_uptr: 0x3c7db78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
41.103 ( 0.010 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), group_fd: -1, flags: FD_CLOEXEC) = 4
41.115 ( 0.006 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 5
41.122 ( 0.004 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 6
41.128 ( 0.008 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 8
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (2 samples) ]
#
I.e. that return -EINVAL in x86_pmu_hw_config() is hit three times.
So fix it by just setting attr.sample_period
Now, after this patch:
# perf trace --max-stack=2 -e perf_event_open,probe:x86_pmu_hw_config* perf record usleep 1
[ perf record: Woken up 1 times to write data ]
0.000 ( 0.017 ms): perf/8469 perf_event_open(attr_uptr: 0x7ffe36c27d10, pid: -1, cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 4
syscall (/usr/lib64/libc-2.24.so)
perf_event_open_cloexec_flag (/home/acme/bin/perf)
0.050 ( 0.031 ms): perf/8469 perf_event_open(attr_uptr: 0x24ebb78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
syscall (/usr/lib64/libc-2.24.so)
perf_evlist__config (/home/acme/bin/perf)
0.092 ( 0.040 ms): perf/8469 perf_event_open(attr_uptr: 0x24ebb78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
syscall (/usr/lib64/libc-2.24.so)
perf_evlist__config (/home/acme/bin/perf)
0.143 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, cpu: -1, group_fd: -1 ) = 4
syscall (/usr/lib64/libc-2.24.so)
perf_event_attr__set_max_precise_ip (/home/acme/bin/perf)
0.161 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), group_fd: -1, flags: FD_CLOEXEC) = 4
syscall (/usr/lib64/libc-2.24.so)
perf_evsel__open (/home/acme/bin/perf)
0.171 ( 0.005 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 5
syscall (/usr/lib64/libc-2.24.so)
perf_evsel__open (/home/acme/bin/perf)
0.180 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 6
syscall (/usr/lib64/libc-2.24.so)
perf_evsel__open (/home/acme/bin/perf)
0.190 ( 0.005 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 8
syscall (/usr/lib64/libc-2.24.so)
perf_evsel__open (/home/acme/bin/perf)
[ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
#
The probe one called from perf_event_attr__set_max_precise_ip() works
the first time, with attr.precise_ip = 3, wit hthe next ones being the
per cpu ones for the cycles:ppp event.
And here is the text from a report and alternative proposed patch by
Thomas-Mich Richter:
---
On s390 the counter and sampling facility do not support a precise IP
skid level and sometimes returns EOPNOTSUPP when structure member
precise_ip in struct perf_event_attr is not set to zero.
On s390 commnd 'perf record -- true' fails with error EOPNOTSUPP. This
happens only when no events are specified on command line.
The functions called are
...
--> perf_evlist__add_default
--> perf_evsel__new_cycles
--> perf_event_attr__set_max_precise_ip
The last function determines the value of structure member precise_ip by
invoking the perf_event_open() system call and checking the return code.
The first successful open is the value for precise_ip.
However the value is determined without setting member sample_period and
indicates no sampling.
On s390 the counter facility and sampling facility are different. The
above procedure determines a precise_ip value of 3 using the counter
facility. Later it uses the sampling facility with a value of 3 and
fails with EOPNOTSUPP.
---
v2: Older compilers (e.g. gcc 4.4.7) don't support referencing members
of unnamed union members in the container struct initialization, so
move from:
struct perf_event_attr attr = {
...
.sample_period = 1,
};
to right after it as:
struct perf_event_attr attr = {
...
};
attr.sample_period = 1;
v3: We need to reset .sample_period to 0 to let the users of
perf_evsel__new_cycles() to properly setup attr.sample_period or
attr.sample_freq. Reported by Ingo Molnar.
Reported-and-Acked-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 18e7a45af9 ("perf/x86: Reject non sampling events with precise_ip")
Link: http://lkml.kernel.org/n/tip-yv6nnkl7tzqocrm0hl3x7vf1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the step_after_suspend test output in the TAP13 format by using the
TAP13 output functions defined in kselftest.h
Signed-off-by: Paul Elder <paul.elder@pitt.edu>
Signed-off-by: Alice Ferrazzi <alice.ferrazzi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Make the breakpoints test output in the TAP13 format by using the
TAP13 output functions defined in kselftest.h
Signed-off-by: Paul Elder <paul.elder@pitt.edu>
Signed-off-by: Alice Ferrazzi <alice.ferrazzi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Make the membarrier test output in the TAP13 format by using the
TAP13 output functions defined in kselftest.h
Signed-off-by: Paul Elder <paul.elder@pitt.edu>
Signed-off-by: Alice Ferrazzi <alice.ferrazzi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add TAP13 conformat output functions to kselftest.h.
Also add exit functions that output TAP13 exiting text, as well as
functions to keep track of testing progress.
Signed-off-by: Paul Elder <paul.elder@pitt.edu>
Signed-off-by: Alice Ferrazzi <alice.ferrazzi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The selftests depend on using the shell exit code as a mean of
detecting the success or failure of test-binary executed. The
appropiate output "[PASS]" or "[FAIL]" in generated by
tools/testing/selftests/lib.mk.
Notice that the exit code is masked with 255. Thus, be careful if
using the number of errors as the exit code, as 256 errors would be
seen as a success.
There are two standard defined exit(3) codes:
/usr/include/stdlib.h
#define EXIT_FAILURE 1 /* Failing exit status. */
#define EXIT_SUCCESS 0 /* Successful exit status. */
Fix test_verifier.c to not use the negative value of variable
"results", but instead return EXIT_FAILURE.
Fix test_align.c and test_progs.c to actually use exit codes, before
they were always indicating success regardless of results.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a USB3 HCD to an existing USB2 HCD and provides
the support of SuperSpeed, in case the device can only be enumerated
with SuperSpeed.
The bulk of the added code in usb3_bos_desc and hub_control to support
SuperSpeed is borrowed from the commit 1cd8fd2887 ("usb: gadget:
dummy_hcd: add SuperSpeed support").
With this patch, each vhci will have VHCI_HC_PORTS HighSpeed ports
and VHCI_HC_PORTS SuperSpeed ports.
Suggested-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A vhci struct is added as the platform-specific data to the vhci
platform device, in order to get the vhci by its platform device.
This is done in vhci_hcd_init().
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In parse_status(), all nports number of idev's are initiated to
0 by memset(), it is simply wrong, because parse_status() reads
the status sys file one by one, therefore, it can only update the
according vhci_driver->idev's for it to parse.
Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 0775a9cbc6 ("usbip: vhci extension: modifications
to vhci driver") introduced multiple controllers, but the status
of the ports are only extracted from the first status file, fix it.
Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A new field ncontrollers is added to the vhci_driver structure.
And this field is stored by scanning the vhci_hcd* dirs in the
platform udev.
Suggested-and-reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we get nonpositive number of ports, there is no sense to
continue, then fail gracefully.
In addition, the commit 0775a9cbc6 ("usbip: vhci extension:
modifications to vhci driver") introduced configurable numbers of
controllers and ports, but we have a static port number maximum,
MAXNPORT. If exceeded, the idev array will be overflown. We fix
it by validating the nports to make sure the port number max is
not exceeded.
Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull RCU updates from Paul E. McKenney:
"The largest feature of this series is shrinking and simplification,
with the following diffstat summary:
79 files changed, 1496 insertions(+), 4211 deletions(-)
In other words, this series represents a net reduction of more than 2700
lines of code."
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Do not confuse the compiler with a semicolon preceding a block. Replace
the semicolon with an empty block to avoid a warning:
gcc -Wl,-no-as-needed -Wall -lpthread seccomp_bpf.c -o /.../linux/tools/testing/selftests/seccomp/seccomp_bpf
In file included from seccomp_bpf.c:40:0:
seccomp_bpf.c: In function ‘change_syscall’:
../kselftest_harness.h:558:2: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
for (; _metadata->trigger; _metadata->trigger = __bail(_assert))
^
../kselftest_harness.h:574:14: note: in expansion of macro ‘OPTIONAL_HANDLER’
} while (0); OPTIONAL_HANDLER(_assert)
^~~~~~~~~~~~~~~~
../kselftest_harness.h:440:2: note: in expansion of macro ‘__EXPECT’
__EXPECT(expected, seen, ==, 0)
^~~~~~~~
seccomp_bpf.c:1313:2: note: in expansion of macro ‘EXPECT_EQ’
EXPECT_EQ(0, ret);
^~~~~~~~~
seccomp_bpf.c:1317:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘for’
{
^
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Will Drewry <wad@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Allow for tc BPF programs to set a skb->hash, apart from clearing
and triggering a recalc that we have right now. It allows for BPF
to implement a custom hashing routine for skb_get_hash().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running all the tests, through 'make run_tests', I had
test_align failing due to insufficient rlimit. Set it the same
way as all other test cases from BPF selftests do, so that
test case properly loads everything.
[...]
Summary: 7 PASSED, 1 FAILED
selftests: test_progs [PASS]
/home/foo/net-next/tools/testing/selftests/bpf
Test 0: mov ... Failed to load program.
FAIL
Test 1: shift ... Failed to load program.
FAIL
Test 2: addsub ... Failed to load program.
FAIL
Test 3: mul ... Failed to load program.
FAIL
Test 4: unknown shift ... Failed to load program.
FAIL
Test 5: unknown mul ... Failed to load program.
FAIL
Test 6: packet const offset ... Failed to load program.
FAIL
Test 7: packet variable offset ... Failed to load program.
FAIL
Results: 0 pass 8 fail
selftests: test_align [PASS]
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test case to track behaviour when traversing and updating the
htab map. We recently used such traversal, so it's quite useful to
keep it as an example in selftests.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
llvm 5.0 does not like the section name and the function name
to be the same:
clang -I. -I./include/uapi -I../../../include/uapi \
-I../../../../samples/bpf/ \
-Wno-compare-distinct-pointer-types \
-O2 -target bpf -c \
linux/tools/testing/selftests/bpf/test_obj_id.c -o \
linux/tools/testing/selftests/bpf/test_obj_id.o
fatal error: error in backend: 'test_prog_id' label emitted multiple times to
assembly file
clang-5.0: error: clang frontend command failed with exit code 70 (use -v to
see invocation)
clang version 5.0.0 (trunk 304326) (llvm/trunk 304329)
This patch makes changes to the section name and the function name.
Fixes: 95b9afd398 ("bpf: Test for bpf ID")
Reported-by: Alexei Starovoitov <ast@fb.com>
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
test_bpf_obj_id() should not expect a non zero jited_prog_len
to be returned by bpf_obj_get_info_by_fd() when
net.core.bpf_jit_enable is 0.
The patch checks for net.core.bpf_jit_enable and
has different expectation on jited_prog_len.
This patch also removes the pwd.h header which I forgot
to remove after making changes.
Fixes: 95b9afd398 ("bpf: Test for bpf ID")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tiny RCU's job is to be tiny, so this commit removes its RCU CPU
stall warning code. After this, there is no longer any need for
rcu_sched_ctrlblk and rcu_bh_ctrlblk to be in tiny_plugin.h, so this
commit also moves them to tiny.c.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The CONFIG_RCU_NOCB_CPU_ALL, CONFIG_RCU_NOCB_CPU_NONE, and
CONFIG_RCU_NOCB_CPU_ZERO Kconfig options are used only in testing and
are redundant with the rcu_nocbs= boot parameter. This commit therefore
removes these three Kconfig options and adjusts the rcutorture scripts
to use the boot parameter instead.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
RCU's debugfs tracing used to be the only reasonable low-level debug
information available, but ftrace and event tracing has since surpassed
the RCU debugfs level of usefulness. This commit therefore removes
RCU's debugfs tracing.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Classic SRCU was only ever intended to be a fallback in case of issues
with Tree/Tiny SRCU, and the latter two are doing quite well in testing.
This commit therefore removes Classic SRCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The sparse-based checking for non-RCU accesses to RCU-protected pointers
has been around for a very long time, and it is now the only type of
sparse-based checking that is optional. This commit therefore makes
it unconditional.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
The PROVE_RCU_REPEATEDLY Kconfig option was initially added due to
the volume of messages from PROVE_RCU: Doing just one per boot would
have required excessive numbers of boots to locate them all. However,
PROVE_RCU messages are now relatively rare, so there is no longer any
reason to need more than one such message per boot. This commit therefore
removes the PROVE_RCU_REPEATEDLY Kconfig option.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
The NO_HZ_FULL_SYSIDLE full-system-idle capability was added in 2013
by commit 0edd1b1784 ("nohz_full: Add full-system-idle state machine"),
but has not been used. This commit therefore removes it.
If it turns out to be needed later, this commit can always be reverted.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Anything that can be done with the RCU_KTHREAD_PRIO Kconfig option can
also be done with the rcutree.kthread_prio kernel boot parameter.
This commit therefore removes this Kconfig option.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
The RCU_TORTURE_TEST_SLOW_PREINIT, RCU_TORTURE_TEST_SLOW_PREINIT_DELAY,
RCU_TORTURE_TEST_SLOW_PREINIT_DELAY, RCU_TORTURE_TEST_SLOW_INIT,
RCU_TORTURE_TEST_SLOW_INIT_DELAY, RCU_TORTURE_TEST_SLOW_CLEANUP,
and RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY Kconfig options are only
useful for torture testing, and there are the rcutree.gp_cleanup_delay,
rcutree.gp_init_delay, and rcutree.gp_preinit_delay kernel boot parameters
that rcutorture can use instead. The effect of these parameters is to
artificially slow down grace period initialization and cleanup in order
to make some types of race conditions happen more often.
This commit therefore simplifies Tree RCU a bit by removing the Kconfig
options and adding the corresponding kernel parameters to rcutorture's
.boot files instead. However, this commit also leaves out the kernel
parameters for TREE02, TREE04, and TREE07 in order to have about the
same number of tests slowed as not slowed. TREE01, TREE03, TREE05,
and TREE06 are slowed, and the rest are not slowed.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
I noticed that test_l4lb was failing in selftests:
# ./test_progs
test_pkt_access:PASS:ipv4 77 nsec
test_pkt_access:PASS:ipv6 44 nsec
test_xdp:PASS:ipv4 2933 nsec
test_xdp:PASS:ipv6 1500 nsec
test_l4lb:PASS:ipv4 377 nsec
test_l4lb:PASS:ipv6 544 nsec
test_l4lb:FAIL:stats 6297600000 200000
test_tcp_estats:PASS: 0 nsec
Summary: 7 PASSED, 1 FAILED
Tracking down the issue actually revealed that endianness selection
in bpf_endian.h is broken when compiled with clang with bpf target.
test_pkt_access.c, test_l4lb.c is compiled with __BYTE_ORDER as
__BIG_ENDIAN, test_xdp.c as __LITTLE_ENDIAN! test_l4lb noticeably
fails, because the test accounts bytes via bpf_ntohs(ip6h->payload_len)
and bpf_ntohs(iph->tot_len), and compares them against a defined
value and given a wrong endianness, the test outcome is different,
of course.
Turns out that there are actually two bugs: i) when we do __BYTE_ORDER
comparison with __LITTLE_ENDIAN/__BIG_ENDIAN, then depending on the
include order we see different outcomes. Reason is that __BYTE_ORDER
is undefined due to missing endian.h include. Before we include the
asm/byteorder.h (e.g. through linux/in.h), then __BYTE_ORDER equals
__LITTLE_ENDIAN since both are undefined, after the include which
correctly pulls in linux/byteorder/little_endian.h, __LITTLE_ENDIAN
is defined, but given __BYTE_ORDER is still undefined, we match on
__BYTE_ORDER equals to __BIG_ENDIAN since __BIG_ENDIAN is also
undefined at that point, sigh. ii) But even that would be wrong,
since when compiling the test cases with clang, one can select between
bpfeb and bpfel targets for cross compilation. Hence, we can also not
rely on what the system's endian.h provides, but we need to look at
the compiler's defined endianness. The compiler defines __BYTE_ORDER__,
and we can match __ORDER_LITTLE_ENDIAN__ and __ORDER_BIG_ENDIAN__,
which also reflects targets bpf (native), bpfel, bpfeb correctly,
thus really only rely on that. After patch:
# ./test_progs
test_pkt_access:PASS:ipv4 74 nsec
test_pkt_access:PASS:ipv6 42 nsec
test_xdp:PASS:ipv4 2340 nsec
test_xdp:PASS:ipv6 1461 nsec
test_l4lb:PASS:ipv4 400 nsec
test_l4lb:PASS:ipv6 530 nsec
test_tcp_estats:PASS: 0 nsec
Summary: 7 PASSED, 0 FAILED
Fixes: 43bcf707cc ("bpf: fix _htons occurences in test_progs")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit e7ee404757 ("perf symbols: Fix symbols searching for module
in buildid-cache") added the function to check kernel modules reside in
the build-id cache. This was because there's no way to identify a DSO
which is actually a kernel module. So it searched linkname of the file
and find ".ko" suffix.
But this does not work for compressed kernel modules and now such DSOs
hCcave correct symtab_type now. So no need to check it anymore. This
patch essentially reverts the commit.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The symsrc__init() overwrites dso->symtab_type as symsrc->type in
dso__load_sym(). But for compressed kernel modules in the build-id
cache, it should have original symtab type to be decompressed as needed.
This fixes perf annotate to show disassembly of the function properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If a kernel modules is compressed, it should be decompressed before
running objdump to parse binary data correctly. This fixes a failure of
object code reading test for me.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On failure, it should free the 'name', so clean up the error path using
goto.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently perf decompresses kernel modules when loading the symbol table
but it missed to do it when reading raw data.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Convert open-coded decompress routine to use the function.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move decompress_kmodule() to util/dso.c and split it into two functions
returning fd and (decompressed) file path. The existing user only wants
the fd version but the path version will be used soon.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'name' variable should be freed on the error path.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 6ebd2547dd ("perf annotate: Fix a bug following symbolic
link of a build-id file") changed to use dirname to follow the symlink.
But it only considers new-style build-id cache names so old names fail
on readlink() and force to use system path which might not available.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Fixes: 6ebd2547dd ("perf annotate: Fix a bug following symbolic link of a build-id file")
Link: http://lkml.kernel.org/r/20170608073109.30699-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Display a (possibly inaccurate) list of all running guests. Note that we
leave a bit of extra room above the list for potential error messages.
Furthermore, we deliberately do not reject pids or guest names that are
not in our list, as we cannot rule out that our fuzzy approach might be
in error somehow.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add new interactive command 'o' to toggle sorting by 'CurAvg/s' (default)
and 'Total' columns.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add new command 's' to modify the update interval. Limited to a maximum of
25.5 sec and a minimum of 0.1 sec, since curses cannot handle longer
and shorter delays respectively.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Display interactive commands reference on 'h'.
While at it, sort interactive commands alphabetically in various places.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'Current' can be misleading as it doesn't tell whether this is the amount
of events in the last interval or the current average per second.
Note that this necessitates widening the respective column by one more
character.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Print header in standout font just like the 'top' command does.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Give users some indication on the reason why no data is displayed on the
screen yet.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Show the cursor in the interactive screens to specify pid, filter or guest
name as an orientation for the user.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Quite a few of the functions are used only in a single class. Moving
functions accordingly to improve the overall structure.
Furthermore, introduce a base class for the providers, which might also
come handy for future extensions.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simplify a couple of initialization routines:
* TracepointProvider and DebugfsProvider: Pass pid into __init__() instead
of switching to the requested value in an extra call after initializing
to the default first.
* Pass a single options object into Stats.__init__(), delaying options
evaluation accordingly, instead of evaluating options first and passing
several parts of the options object to Stats.__init__() individually.
* Eliminate Stats.update_provider_pid(), since this 2-line function is now
used in a single place only.
* Remove extra call to update_drilldown() in Tui.__init__() by getting the
value of options.fields right initially when parsing options.
* Simplify get_providers() logic.
* Avoid duplicate fields initialization by handling it once in the
providers' __init__() methods.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Function available_fields() is not used in any place.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simplify line print logic for header and data lines in interactive mode
as previously suggested by Radim.
While at it, add a space between the first two columns to avoid the
total bleeding into the event name.
Furthermore, for column 'Current', differentiate between no events being
reported (empty 'Current' column) vs the case where events were reported
but the average was rounded down to zero ('0' in 'Current column), for
the folks who appreciate the difference.
Finally: Only skip events which were not reported at all yet, instead of
events that don't have a value in the current interval.
Considered using constants for the field widths in the format strings.
However, that would make things a bit more complicated, and considering
that there are only two places where output happens, I figured it isn't
worth the trouble.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Certain interactive commands will not modify any information displayed in
the header, hence we can skip them.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We should not use the initial sleeptime for any key press that does not
switch to a different screen, as that introduces an unaesthetic flicker due
to two updates in quick succession.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When an update interval is interrupted via key press (e.g. space), the
'Current' column value is calculated using the full interval length
instead of the elapsed time, which leads to lower than actual numbers.
Furthermore, the value should be rounded, not truncated.
This is fixed by using the actual elapsed time for the calculation.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, when running from a git archive, the testid.txt file contains
only the branch name, the output of "git status", and the SHA-1 of
the current HEAD. This is useful, but does not uniquely identify the
source code that was built. This commit therefore adds the output of
"git diff HEAD", which means that if two testid.txt files compare equal,
they correspond to exactly the same source code. Give or take the
possibility of SHA-1 collisions, that is. ;-)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Most OS distribution have awk in /usr/bin not in /bin
Without this patch, kernel-devsrc fails to build as
runtime dependency for srcu-cbmc script /bin/awk is
not found.
Signed-off-by: Kushwaha, Priyalee <priyalee.kushwaha@intel.com>
Acked-by: Lance Roy <ldr709@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Given that the plan is to retire Classic SRCU in the near future, this
commit reduces the number of CPUs dedicated to testing Classic SRCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a TINY rcuperf test scenario, which allows performance
testing of Tiny RCU and Tiny SRCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a Kconfig-fragment file for Classic SRCU to ease
performance comparisons with Tree SRCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The TREE and TREE54 rcuperf scenarios' Kconfig fragment files specified
conflicting values for CONFIG_RCU_TRACE. This commit therefore removes
the =n line in favor of the =y line.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
A number of the rcutorture test scenarios were not using the desired
Kconfig options because dependencies were preventing the selections in the
Kconfig-fragment files from being honored. This commit therefore updates
the Kconfig-fragment files to account for these changes in dependencies.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcutorture scripting handles the CONFIG_*_TORTURE_TEST Kconfig
options specially, and therefore greps them out of the Kconfig-fragment
files. Unfortunately, a poor choice of grep pattern means that the
CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP, CONFIG_RCU_TORTURE_TEST_SLOW_INIT,
and CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT Kconfig options are also grepped
out, preventing rcutorture from using them. This commit therefore fixes
the offending grep pattern to focus only on the CONFIG_*_TORTURE_TEST
Kconfig options.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
A robust combination of paranoia and cowardice has resulted in retaining
Classic SRCU (CONFIG_CLASSIC_SRCU) as a backup for the shiny new Tiny
and Tree SRCU implementations. If it is to be a viable backup, it of
course needs to be tested. This commit therefore adds an rcutorture
scenario named SRCU-C for Classic SRCU. This commit also adds this
scenario to the set that are run by default.
Once sufficient good experience has accumulated for Tiny and Tree SRCU,
this test will be removed, along with the Classic SRCU implementation
itself.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds an SRCU-t rcutorture scenario for the new Tiny SRCU
implementation, removing the need to pass the --bootargs parameter to
kvm.sh to run Tiny SRCU tests. This commit also adds SRCU-t to the set
of scenarios that are run by default.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Kconfig "select" clauses can defeat Kconfig-fragment file attempts to
clear a given Kconfig variable, and dependencies can defeat attempts to
set a given Kconfig variable. Because "select" clauses and dependencies
can be added at any time, there needs to be a way to verify that the
Kconfig-fragment file's requests were honored. And there is, except
that it is buggy. This commit therefore provides the needed fix.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a test for a three-level srcu_node tree for Tree SRCU
in the existing SRCU-P scenario. This requires enabling CONFIG_RCU_EXPERT,
so the CONFIG_RCU_EXPERT=n scenario is now SRCU-N. The reason for using
SRCU-P for the tall tree is that preemption raises the possibility of
locating more bugs than does the non-preemptive SRCU-N.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Back when SRCU was simpler, there wasn't much need for lockdep.
However, with Tree SRCU, it is needed. This commit therefore adds
CONFIG_PROVE_LOCKING to the SRCU-P scenario.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Few shell command examples in perf-script-python.txt has few nitpicks
include:
- tools/perf/scripts/python directory listing command is unnecessarily
repeated.
- few examples contain additional information in command prompt
unnecessarily and inconsistently.
This commit fixes them to enhance readability of the document.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Fixes: cff68e5822 ("perf/scripts: Add perf-trace-python Documentation")
Link: http://lkml.kernel.org/r/20170530111827.21732-4-sj38.park@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Default function signature of trace_unhandled() got changed to include a
field dict, but its documentation, perf-script-python.txt has not been
updated. Fix it.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pierre Tardy <tardyp@gmail.com>
Fixes: c02514850d ("perf scripts python: Give field dict to unhandled callback")
Link: http://lkml.kernel.org/r/20170530111827.21732-6-sj38.park@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This commit fixes wrong code snippets for trace_begin() and trace_end()
function example definition.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Fixes: cff68e5822 ("perf/scripts: Add perf-trace-python Documentation")
Link: http://lkml.kernel.org/r/20170530111827.21732-5-sj38.park@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Script generated by the '--gen-script' option contains an outdated
comment. It mentions a 'perf-trace-python' document while it has been
renamed to 'perf-script-python'. Fix it.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 133dc4c39c ("perf: Rename 'perf trace' to 'perf script'")
Link: http://lkml.kernel.org/r/20170530111827.21732-2-sj38.park@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An example in perf-probe documentation for pattern of function name
based probe addition is not providing example command for that case.
This commit fixes the example to give appropriate example command.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Fixes: ee391de876 ("perf probe: Update perf probe document")
Link: http://lkml.kernel.org/r/20170507103642.30560-1-sj38.park@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Return unsupported if the kernel is too old to support
instance independent ftrace filter for some testcases.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Use top-level available_filter_function if the test case
is running under an instance.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add instance test indication in test log too.
Current ftracetest shows instance test indication on
the list of test, but not in the log for each test.
This adds instance test indication on the top of
each log, like below;
execute (instance) : /ftrace/test.d/ftrace/func_set_ftrace_file.tc
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Since older kernel didn't support separated instance of
set_ftrace_filter, if the test case set the filter in
an instance, it will propagate to top-level instance.
This means that the filter setting remains even if we
remove the instance, and will cause other tests failure.
To avoid this issue, reset the ftrace filter if we
detect the propagation.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Check the kretprobe maxactive is supported by kprobe_events
interface. To ensure the kernel feature, this changes ftrace
README to describe it.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Current event/toplevel-enable.tc checking the trace
buffer by dumping all events while recording events.
However, this makes system very busy.
To reduce this overhead comes from reading trace buffer
and recording trace buffer, use head instead of cat
and stop tracing while reading.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Skip a part of ftrace filter test related to full-glob
matching if we are sure that the testing kernel is so old
that it does not support full-glob-matching yet.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add ReST metadata to kselftest_harness.h to be able to include the
comments in the Sphinx documentation.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The seccomp/test_harness.h file contains useful helpers to build tests.
Moving it to the selftest directory should benefit to other test
components.
Keep seccomp maintainers for this file.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Will Drewry <wad@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Shuah Khan <shuah@kernel.org>
Link: https://lkml.kernel.org/r/CAGXu5j+8CVz8vL51DRYXqOY=xc3zuKFf=PTENe88XYHzFYidUQ@mail.gmail.com
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The "Sync framework" test doesn't work if the kernel has no support,
obviously. Rather than reporting a failure, check for the kernel support
by looking for /sys/kernel/debug/sync/sw_sync, and if not found skip the
test.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Arm64 has 256TB address space so fix the test to pass on Arm as well.
Also remove unneeded numaif header.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Most of the tests under selftests follow a pattern for their results,
which can then be parsed easily by other external tools easily. Though
futex tests do print the test results very well, it doesn't really
follow the general selftests pattern.
This patch makes necessary changes to fix that.
Output before this patch:
futex_requeue_pi: Test requeue functionality
Arguments: broadcast=0 locked=0 owner=0 timeout=0ns
Result: PASS
Output after this patch:
futex_requeue_pi: Test requeue functionality
Arguments: broadcast=0 locked=0 owner=0 timeout=0ns
selftests: futex-requeue-pi [PASS]
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
- Only print NMI watchdog hint in 'perf stat' when it is enabled (Andi Kleen)
- Fix sys_mmap/sys_old_mmap shandling in s390 in 'perf trace' (Jiri Olsa)
- Disable breakpoint signal tests in powerpc, that lacks the perf kernel
glue to set breakpoint events and makes 'perf test' always fail (Jiri Olsa)
- Fix 'perf annotate' for branch instruction with multiple operands (Kim Phillips)
- Add missing powerpc triplet when disassembling with 'objdump' in 'perf
annotate' (Kim Phillips)
- Do not trow away partial unwound stacks when using libdw, making
callchains produced with it similar to those produced when linked with
the other DWARF unwind library supported in perf, libunwind (Milian Wolff)
- Fixes to properly handle kernel modules when processing build-id meta
events (Namhyung Kim)
- Fix handling of compressed modules in the build-id cache (Namhyung Kim)
- Fix 'perf annotate' failure when filename has special chars (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Oasi
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-4.12-20170606' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Only print NMI watchdog hint in 'perf stat' when it is enabled (Andi Kleen)
- Fix sys_mmap/sys_old_mmap shandling in s390 in 'perf trace' (Jiri Olsa)
- Disable breakpoint signal tests in powerpc, that lacks the perf kernel
glue to set breakpoint events and makes 'perf test' always fail (Jiri Olsa)
- Fix 'perf annotate' for branch instruction with multiple operands (Kim Phillips)
- Add missing powerpc triplet when disassembling with 'objdump' in 'perf
annotate' (Kim Phillips)
- Do not trow away partial unwound stacks when using libdw, making
callchains produced with it similar to those produced when linked with
the other DWARF unwind library supported in perf, libunwind (Milian Wolff)
- Fixes to properly handle kernel modules when processing build-id meta
events (Namhyung Kim)
- Fix handling of compressed modules in the build-id cache (Namhyung Kim)
- Fix 'perf annotate' failure when filename has special chars (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
acpi_evaluate_dsm() and friends take a pointer to a raw buffer of 16
bytes. Instead we convert them to use guid_t type. At the same time we
convert current users.
acpi_str_to_uuid() becomes useless after the conversion and it's safe to
get rid of it.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add test to exercise the bpf_prog/map id generation,
bpf_(prog|map)_get_next_id(), bpf_(prog|map)_get_fd_by_id() and
bpf_get_obj_info_by_fd().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows to detect -s (--silent) option without checking GNU Make
version.
As commit e36aaea289 ("kbuild: Fix silent builds with make-4")
pointed out, GNU Make 4.x changed the way/order it presents the
command line options into MAKEFLAGS.
In Make 3.8x, 's' is always the first in a group of short options.
The group may be prefixed with '-' in some cases.
In Make 4.x, 's' is always the last in a group of short options.
As commit e6ac89fabd ("kbuild: Correctly deal with make options
which contain an 's'") addressed, we also need to deal with long
options that contain 's', like --warn-undefined-variables.
Test cases:
[1] command line input: make --silent
-> MAKEFLAGS for Make 3.8x: s
-> MAKEFLAGS for Make 4.x : s
[2] command line input: make -srR
-> MAKEFLAGS for Make 3.8x: sRr
-> MAKEFLAGS for Make 4.x : rRs
[3] command line input: make -s -rR --warn-undefined-variables
-> MAKEFLAGS for Make 3.8x: --warn-undefined-variables -sRr
-> MAKEFLAGS for Make 4.x : rRs --warn-undefined-variables
My idea to cater to all the cases more easily is to filter out long
options (--%), then search 's' with $(findstring ...). This way will
be more future-proof even if future versions of Make put 's' in the
middle of the group.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In some situations the libdw unwinder stopped working properly. I.e.
with libunwind we see:
~~~~~
heaptrack_gui 2228 135073.400112: 641314 cycles:
e8ed _dl_fixup (/usr/lib/ld-2.25.so)
15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so)
ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0)
608f3 _GLOBAL__sub_I_kdynamicjobtracker.cpp (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0)
f199 call_init.part.0 (/usr/lib/ld-2.25.so)
f2a5 _dl_init (/usr/lib/ld-2.25.so)
db9 _dl_start_user (/usr/lib/ld-2.25.so)
~~~~~
But with libdw and without this patch this sample is not properly
unwound:
~~~~~
heaptrack_gui 2228 135073.400112: 641314 cycles:
e8ed _dl_fixup (/usr/lib/ld-2.25.so)
15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so)
ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0)
~~~~~
Debug output showed me that libdw found a module for the last frame
address, but it thinks it belongs to /usr/lib/ld-2.25.so. This patch
double-checks what libdw sees and what perf knows. If the mappings
mismatch, we now report the elf known to perf. This fixes the situation
above, and the libdw unwinder produces the same stack as libunwind.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20170602143753.16907-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On an Ubuntu xenial system, 'perf annotate' says to install powerpc
objdump on a system that already has binutils-powerpc-linux-gnu
installed. Make perf aware of the missing triplet for the
powerpc-linux-gnu target.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170529142754.7fbfb1152fd8f2663de0ea70@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following tests are failing on powerpc:
# perf test break
18: Breakpoint overflow signal handler : FAILED!
19: Breakpoint overflow sampling : FAILED!
The powerpc kenel so far does not have support to even create
instruction breakpoints using the perf event interface, so those tests
fail early in the config phase.
I added a '->is_supported()' callback to test struct to be able to
disable specific tests. It seems better than putting ifdefs directly to
the test array.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170601205450.GA398@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The decompress_kmodule() decompresses kernel modules in order to load
symbols from it. In the DSO_BINARY_TYPE__BUILD_ID_CACHE case, it needs
the full file path to extract the file extension to determine the
decompression method. But overwriting 'name' will fail the
decompression since it might point to a non-existing old file.
Instead, use dso->long_name for having the correct extension and use the
real filename to decompress.
In the DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP case, both names should
be the same. This allows resolving symbols in the old modules.
Before:
$ perf report -i perf.data.old | grep scsi_mod
0.00% cc1 [scsi_mod] [k] 0x0000000000004aa6
0.00% as [scsi_mod] [k] 0x00000000000099e1
0.00% cc1 [scsi_mod] [k] 0x0000000000009830
0.00% cc1 [scsi_mod] [k] 0x0000000000001b8f
After:
0.00% cc1 [scsi_mod] [k] scsi_handle_queue_ramp_up
0.00% as [scsi_mod] [k] scsi_sg_alloc
0.00% cc1 [scsi_mod] [k] scsi_setup_cmnd
0.00% cc1 [scsi_mod] [k] scsi_get_command
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170531120105.21731-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like machine__findnew_module_dso(), it should set necessary info for
kernel modules to find symbol info from the file. Factor out
dso__set_module_info() to do it.
This is needed for dso__needs_decompress() to detect such DSOs.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170531120105.21731-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf processes build-id event, it creates DSOs with the build-id.
But it didn't set the module short name (like '[module-name]') so when
processing a kernel mmap event of the module, it cannot found the DSO as
it only checks the short names.
That leads for perf to create a same DSO without the build-id info and
it'll lookup the system path even if the DSO is already in the build-id
cache. After kernel was updated, perf cannot find the DSO and cannot
show symbols in it anymore.
You can see this if you have an old data file (w/ old kernel version):
$ perf report -i perf.data.old -v |& grep scsi_mod
build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz : cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1
Failed to open /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz, continuing without symbols
...
The second message didn't show the build-id. With this patch:
$ perf report -i perf.data.old -v |& grep scsi_mod
build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz: cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1
/lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz with build id cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 not found, continuing without symbols
...
Now it shows the build-id but still cannot load the symbol table. This
is a different problem which will be fixed in the next patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170531120105.21731-1-namhyung@kernel.org
[ Fix the build on older compilers (debian <= 8, fedora <= 21, etc) wrt kmod_path var init ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This would prevent the liblockdep error messages from getting
mixed in with the test result output.
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: a.p.zijlstra@chello.nl
Cc: ben@decadent.org.uk
Link: http://lkml.kernel.org/r/20170525130005.5947-22-alexander.levin@verizon.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- More rcu stubs
- New dummy headers due to sched header split
- jhash2 included in due to kernel lockdep inclusion and usage
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: a.p.zijlstra@chello.nl
Cc: ben@decadent.org.uk
Link: http://lkml.kernel.org/r/20170525130005.5947-13-alexander.levin@verizon.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mixing fd-based and stream-base IO results in interleaved output like
following:
=====================================
liblockdep 4.7.6
-------------------------------------
conopal/372 is trying to release lock (0x3a45c) at:
/lib/libpt.so.2.17-alpha2(_ZN11PTimedMutex6SignalEv+0x3c) [0xb613c688]
but there are no more locks to release!
other info that might help us debug this:
no locks held by conopal/372.
stack backtrace:
=====================================
liblockdep 4.7.6
---------------------------------/usr/lib/liblockdep.so.4.7.6(+0x1e3c)[0xb67c2e3c]
/usr/lib/liblockdep.so.4.7.6(+0x5fe0)[0xb67c6fe0]
/usr/lib/liblockdep.so.4.7.6(+0x6450)[0xb67c7450]
/usr/lib/liblockdep.so.4.7.6(lock_release+0x5c)[0xb67c7c40]
/usr/lib/liblockdep.so.4.7.6(pthread_mutex_unlock+0x38)[0xb67c91d4]
/lib/libpt.so.2.17-alpha2(_ZN11PTimedMutex6SignalEv+0x3c)[0xb613c688]
/lib/libpt.so.2.17-alpha2(_ZN10PContainer14AssignContentsERKS_+0xe4)[0xb6160730]
/lib/libopal.so.3.17-alpha2(_ZN15OpalMediaFormat14AssignContentsERK10PContainer+0x90)[0xb6435edc]
/lib/libopal.so.3.17-alpha2(_ZN15OpalMediaFormataSERK7PString+0x68)[0xb643b610]
/lib/libopal.so.3.17-alpha2(_ZN15OpalMediaFormatC2EPKc+0x68)[0xb643b6cc]
/lib/libopal.so.3.17-alpha2(_ZN11OpalWAVFile14AddMediaFormatERK15OpalMediaFormat+0x330)[0xb66b2224]
/lib/libopal.so.3.17-alpha2(+0x2526f8)[0xb640c6f8]
/lib/ld-linux-armhf.so.3(+0x102f0)[0xb6f852f0]
/lib/ld-linux-armhf.so.3(+0x1044c)[0xb6f8544c]
/lib/ld-linux-armhf.so.3(+0xac4)[0xb6f75ac4]
/usr/lib/liblockdep.so.4.7.6(+0x1e3c)[0xb67c2e3c]
/usr/lib/liblockdep.so.4.7.6(+0x5fe0)[0xb67c6fe0]
/usr/lib/liblockdep.so.4.7.6(+0x6450)[0xb67c7450]
/usr/lib/liblockdep.so.4.7.6(lock_release+0x5c)[0xb67c7c40]
/usr/lib/liblockdep.so.4.7.6(pthread_mutex_unlock+0x38)[0xb67c91d4]
/lib/libpt.so.2.17-alpha2(_ZN11PTimedMutex6SignalEv+0x3c)[0xb613c688]
/lib/libopal.so.3.17-alpha2(_ZN15OpalMediaFormat14AssignContentsERK10PContainer+0x78)[0xb6435ec4]
/lib/libopal.so.3.17-alpha2(_ZN15OpalMediaFormataSERK7PString+0x68)[0xb643b610]
/lib/libopal.so.3.17-alpha2(_ZN15OpalMediaFormatC2EPKc+0x68)[0xb643b6cc]
/lib/libopal.so.3.17-alpha2(_ZN11OpalWAVFile14AddMediaFormatERK15OpalMediaFormat+0x330)[0xb66b2224]
/lib/libopal.so.3.17-alpha2(+0x2526f8)[0xb640c6f8]
/lib/ld-linux-armhf.so.3(+0x102f0)[0xb6f852f0]
/lib/ld-linux-armhf.so.3(+0x1044c)[0xb6f8544c]
/lib/ld-linux-armhf.so.3(+0xac4)[0xb6f75ac4]
Therefore change all bare printf(...) to dprintf(STDOUT_FILENO, ...) to
sychronize with backtrace_symbols_fd().
[ BUG: bad unlock balance detected! ]
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: a.p.zijlstra@chello.nl
Cc: ben@decadent.org.uk
Link: http://lkml.kernel.org/r/20170525130005.5947-12-alexander.levin@verizon.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With -lpthread option, the test for ABBA_2threads was
failing, and test passed if it was removed.
Since -pthread compiler option is sufficient for linking
to pthread libraries, this patch removes -lpthread.
Signed-off-by: Vishal Thanki <vishalthanki@gmail.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: a.p.zijlstra@chello.nl
Cc: ben@decadent.org.uk
Link: http://lkml.kernel.org/r/20170525130005.5947-9-alexander.levin@verizon.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We define init_utsname() as static but not inline, resulting
in a warning for every source file that includes lockdep.h but
doesn't call it.
Since it is only used by lockdep.c, define it in there.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: a.p.zijlstra@chello.nl
Link: http://lkml.kernel.org/r/20170525130005.5947-8-alexander.levin@verizon.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
liblockdep defines trivial macros for working with interrupt flags, as
interrupts are never disabled in userland. This results in warnings
from gcc when -Wunused-but-set-variable is enabled, and it is enabled
by -Wall. Fix this by evaluating the flags parameter and casting it to
void.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: a.p.zijlstra@chello.nl
Link: http://lkml.kernel.org/r/20170525130005.5947-7-alexander.levin@verizon.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
liblockdep defines various macros that may expand to an expression
with no effect, while the in-kernel definition does have an effect.
This results in warnings from gcc when -Wunused-value is enabled, and
is is enabled by -Wall. Fix this by introducing trivial functions,
as function return values are generally allowed to be ignored.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: a.p.zijlstra@chello.nl
Link: http://lkml.kernel.org/r/20170525130005.5947-6-alexander.levin@verizon.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Regressions in liblockdep may be missed because it doesn't enable
warnings.
Adding -Wall immediately introduces a lot of warnings, but those will
be fixed by the following commits.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: a.p.zijlstra@chello.nl
Link: http://lkml.kernel.org/r/20170525130005.5947-5-alexander.levin@verizon.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
liblockdep has been broken since commit 75dd602a51 ("lockdep: Fix
lock_chain::base size"), as that adds a check that MAX_LOCK_DEPTH is
within the range of lock_chain::depth and in liblockdep it is much
too large.
That should have resulted in a compiler error, but didn't because:
- the check uses ARRAY_SIZE(), which isn't yet defined in liblockdep
so is assumed to be an (undeclared) function
- putting a function call inside a BUILD_BUG_ON() expression quietly
turns it into some nonsense involving a variable-length array
It did produce a compiler warning, but I didn't notice because
liblockdep already produces too many warnings if -Wall is enabled
(which I'll fix shortly).
Even before that commit, which reduced lock_chain::depth from 8 bits
to 6, MAX_LOCK_DEPTH was too large.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: <stable@vger.kernel.org> # for versions before 4.6, use a value of 255
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: a.p.zijlstra@chello.nl
Link: http://lkml.kernel.org/r/20170525130005.5947-3-alexander.levin@verizon.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
__lock_pin_lock() now calls prandom_u32() which is not defined in
liblockdep. __lock_pin_lock() and its caller lock_pin_lock() are dead
code in liblockdep, but we still need to provide a definition of
prandom_u32() in case lazy binding is disabled.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: a.p.zijlstra@chello.nl
Fixes: e7904a28f5 ("locking/lockdep, sched/core: Implement a better ...")
Link: http://lkml.kernel.org/r/20170525130005.5947-2-alexander.levin@verizon.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reduces overhead of mutex locking and increases context switch
rate significantly (which helps to measure and profile the context
switch path).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This commit updates documentation of the bpf_perf_event_output and
bpf_perf_event_read helpers to match their implementation.
Signed-off-by: Teng Qin <qinteng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
On HyperV, the VF interface can be offered by a host at any time.
Mark the VF interface as hotplug, to make sure it will be brought up
automatically when it is registered.
Signed-off-by: Simon Xiao <sixiao@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On HyperV, the VF interface can be offered by a host at any time.
Mark the VF interface as hotplug, to make sure it will be brought up
automatically when it is registered.
Signed-off-by: Simon Xiao <sixiao@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only print the NMI watchdog hint when that watchdog it actually enabled.
This avoids printing these unnecessarily.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-lnw7edxnqsphkmeew857wz1i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, default vary will not accomodate superspeed endpoints
causing unexpected babble errors in the IN direction. Let's update
default 'vary' parameter so that we can maintain a "short-less"
transfer as hinted at the comment.
Reported-by: Ammy Yi <ammy.yi@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
The s390 architecture maps sys_mmap (nr 90) into sys_old_mmap. For this
reason perf trace can't find the proper syscall event to get args format
from and displays it wrongly as 'continued'.
To fix that fill the "alias" field with "old_mmap" for trace's mmap record
to get the correct translation.
Before:
0.042 ( 0.011 ms): vest/43052 fstat(statbuf: 0x3ffff89fd90 ) = 0
0.042 ( 0.028 ms): vest/43052 ... [continued]: mmap()) = 0x3fffd6e2000
0.072 ( 0.025 ms): vest/43052 read(buf: 0x3fffd6e2000, count: 4096 ) = 6
After:
0.045 ( 0.011 ms): fstat(statbuf: 0x3ffff8a0930 ) = 0
0.057 ( 0.018 ms): mmap(arg: 0x3ffff8a0858 ) = 0x3fffd14a000
0.076 ( 0.025 ms): read(buf: 0x3fffd14a000, count: 4096 ) = 6
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170531113557.19175-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Two entirely new drivers in here plus the usual range of cleanups and features.
New device support
* ad5064
- add ltc2631, ltc2633 and ltc2635 support.
* bma180
- trivial support for bma250e (new id)
* hid-sensor-rotation
- add relative orientation and geometric orientation support.
* isl29028
- add isl29030 support (its effectively the same part from a driver point of
view)
* maxim_thermocouple
- add max31856 id.
* meson-saradc
- add meson8b SoC adc support.
* ti-adc084s021
- new driver and bindings.
* ti-adc108s102
- new driver and bindings.
Staging graduations
* isl29028
Features
* bma180
- ACPI enumeration for BMA250E which is used in various x86 tablets.
* hi8453
- add raw access rather than only events.
* hid-sensor-hub
- Implement batch mode in which we can set a threshold on the amount of time
between data coming from the fifos. This is the first device to do this
rather than use a watershed on the number of samples.
* hts221
- power management support
* lsm6dsx
- add system power management support.
* rpr0521
- sampling frequency read / write
* stm32-trigger
- add support for TRG02 triggers.
* tsl2583
- runtime power management support.
Cleanups
* core
- inkern: fix a double unlock in iio_read_available_channel_raw when raw
value doesn't appear to be raw (error path).
- fixup accidental sizeof pointer in iio_device_add_mask_type.
* docs
- fix an accidental duplicated line in sysfs-bus-iio-meas-spec.
* tools
- use local include/uapi headers to ensure always up to date.
- increase length of allowed trigger names.
* ad9834
- symbolic to octal permissions.
* ade7753
- symbolic to octal permissions.
- fix indentation
* ade7754
- symbolic to octal permissions.
* ade7758
- symbolic to octal permissions.
- ade7854
- symbolic to octal permissions.
* as3935
- move out of storm check to given consistent results for raw and processed
values.
* bmp280
- fix bme280 naming in Kconfig help.
* hi8435
- avoid garbage on event after enable.
- add missing in_voltage_sensing_mode_available to list possible enum options.
- handle the reset gpio with the obvious polarity rather than relying on
DT to provide it correctly.
* hid-sensors
- fix a wrong error path scrubbing of return values.
* hid-sensors-accel
- drop static on a local variable
* hid-sensors-rotation
- Add missing scale and offset property parsing support.
* ina2xx
- Fix a bad use of GENMASK and some typos and whitespace issues.
* isl29018
- only declare the ACPI table when ACPI is enabled.
* isl29028
- fix proximity sleep times.
* lsm6dsx
- replace ifdef CONFIG_PM with __maybe_unused to avoid the complexity of
dealing with the various PM config variables.
* meson-saradc
- mark meson_sar_adc_data static and const.
* rcar-gyroadc
- derive the interface clock speed from the fck clock on the basis they are
the same actual clock.
- drop the now unused if clock from the bindings.
* rpr0521
- disable sensor when marked as such rather than always enabling it.
- poweroff if probe fails and we can talk to device.
- make sure device powered off when it doesn't need to be on.
- use sizeof rather than hardcoded size on value read.
- whitespace fixup.
- reorder channel numbers ready for buffered support which didn't quite
make this pull request.
* st-accel
- fix platform data initialization to allow remove and reprobe.
* st-pressure
- fix platform data initialization to allow remove and reprobe.
* tsl2x7x
- S_IRUGO, S_IWUSR to octal values
- rename driver for consistency with more recent drivers
- drop FSF mailing address
- replace DEVICE_ATTR macros with the shorter DEVICE_ATTR_RW form and
relevant function renames.
* zpa2326
- report an error for consistency with other error paths.
-----BEGIN PGP SIGNATURE-----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=XLVY
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new device support, features and cleanups for IIO in the 4.13 cycle
Two entirely new drivers in here plus the usual range of cleanups and features.
New device support
* ad5064
- add ltc2631, ltc2633 and ltc2635 support.
* bma180
- trivial support for bma250e (new id)
* hid-sensor-rotation
- add relative orientation and geometric orientation support.
* isl29028
- add isl29030 support (its effectively the same part from a driver point of
view)
* maxim_thermocouple
- add max31856 id.
* meson-saradc
- add meson8b SoC adc support.
* ti-adc084s021
- new driver and bindings.
* ti-adc108s102
- new driver and bindings.
Staging graduations
* isl29028
Features
* bma180
- ACPI enumeration for BMA250E which is used in various x86 tablets.
* hi8453
- add raw access rather than only events.
* hid-sensor-hub
- Implement batch mode in which we can set a threshold on the amount of time
between data coming from the fifos. This is the first device to do this
rather than use a watershed on the number of samples.
* hts221
- power management support
* lsm6dsx
- add system power management support.
* rpr0521
- sampling frequency read / write
* stm32-trigger
- add support for TRG02 triggers.
* tsl2583
- runtime power management support.
Cleanups
* core
- inkern: fix a double unlock in iio_read_available_channel_raw when raw
value doesn't appear to be raw (error path).
- fixup accidental sizeof pointer in iio_device_add_mask_type.
* docs
- fix an accidental duplicated line in sysfs-bus-iio-meas-spec.
* tools
- use local include/uapi headers to ensure always up to date.
- increase length of allowed trigger names.
* ad9834
- symbolic to octal permissions.
* ade7753
- symbolic to octal permissions.
- fix indentation
* ade7754
- symbolic to octal permissions.
* ade7758
- symbolic to octal permissions.
- ade7854
- symbolic to octal permissions.
* as3935
- move out of storm check to given consistent results for raw and processed
values.
* bmp280
- fix bme280 naming in Kconfig help.
* hi8435
- avoid garbage on event after enable.
- add missing in_voltage_sensing_mode_available to list possible enum options.
- handle the reset gpio with the obvious polarity rather than relying on
DT to provide it correctly.
* hid-sensors
- fix a wrong error path scrubbing of return values.
* hid-sensors-accel
- drop static on a local variable
* hid-sensors-rotation
- Add missing scale and offset property parsing support.
* ina2xx
- Fix a bad use of GENMASK and some typos and whitespace issues.
* isl29018
- only declare the ACPI table when ACPI is enabled.
* isl29028
- fix proximity sleep times.
* lsm6dsx
- replace ifdef CONFIG_PM with __maybe_unused to avoid the complexity of
dealing with the various PM config variables.
* meson-saradc
- mark meson_sar_adc_data static and const.
* rcar-gyroadc
- derive the interface clock speed from the fck clock on the basis they are
the same actual clock.
- drop the now unused if clock from the bindings.
* rpr0521
- disable sensor when marked as such rather than always enabling it.
- poweroff if probe fails and we can talk to device.
- make sure device powered off when it doesn't need to be on.
- use sizeof rather than hardcoded size on value read.
- whitespace fixup.
- reorder channel numbers ready for buffered support which didn't quite
make this pull request.
* st-accel
- fix platform data initialization to allow remove and reprobe.
* st-pressure
- fix platform data initialization to allow remove and reprobe.
* tsl2x7x
- S_IRUGO, S_IWUSR to octal values
- rename driver for consistency with more recent drivers
- drop FSF mailing address
- replace DEVICE_ATTR macros with the shorter DEVICE_ATTR_RW form and
relevant function renames.
* zpa2326
- report an error for consistency with other error paths.
Fix running SPU programs on Cell, and a few other minor fixes.
Thanks to:
Alistair Popple, Jeremy Kerr, Michael Neuling, Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=EM32
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix running SPU programs on Cell, and a few other minor fixes.
Thanks to Alistair Popple, Jeremy Kerr, Michael Neuling, Nicholas
Piggin"
* tag 'powerpc-4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Add PPC_FEATURE userspace bits for SCV and DARN instructions
powerpc/spufs: Fix hash faults for kernel regions
powerpc: Fix booting P9 hash with CONFIG_PPC_RADIX_MMU=N
powerpc/powernv/npu-dma.c: Fix opal_npu_destroy_context() call
selftests/powerpc: Fix TM resched DSCR test with some compilers
Pull perf tooling fixes from Thomas Gleixner:
- Synchronization of tools and kernel headers
- A series of fixes for perf report addressing various failures:
* Handle invalid maps proper
* Plug a memory leak
* Handle frames and callchain order correctly
- Fixes for handling inlines and children mode
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/include: Sync kernel ABI headers with tooling headers
perf tools: Put caller above callee in --children mode
perf report: Do not drop last inlined frame
perf report: Always honor callchain order for inlined nodes
perf script: Add --inline option for debugging
perf report: Fix off-by-one for non-activation frames
perf report: Fix memory leak in addr2line when called by addr2inlines
perf report: Don't crash on invalid maps in `-g srcline` mode
One was simply a memory leak where not all was being freed that should
have been in releasing a file pointer on set_graph_function.
Then Thomas found that the ftrace trampolines were marked for read/write
as well as execute. To shrink the possible attack surface, he added
calls to set them to ro. Which also uncovered some other issues with
freeing module allocated memory that had its permissions changed.
Kprobes had a similar issue which is fixed and a selftest was added
to trigger that issue again.
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJZKOiVFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
vBoH/jxVozuAEVCv+Nbj6fhRxe4emjo0lZZb32EbEaSV/nUQGqHIZFdDQtbt+ld+
sn06/BSMBI+L4BqLj1BCAW0e/zIn/4birIg53SX5jQwc3AlhUG7HS2d+RJZZCrp9
Zofq9L6xZ4Hl2XjkPXqwEgtrwxQtkIPLlJqeYDJ6BVrlPfOPEwB7bfR7B684wiYT
6h2Qo7f/ZQzgJ1sK8N2IjHEnAgE08KCYcj4IB4WHJk6SqQz3bv1Y00WBg2UQihVT
TPPSVhYLnrSw53fxyALqZbHo2DvnQf1TnNadWxvSIpbvgm/T5GG60FDtvHgNfbwz
yKuKAog+P9xBLkoAcfvODLY9O5s=
=75TZ
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fixes from Steven Rostedt:
"There's been a few memory issues found with ftrace.
One was simply a memory leak where not all was being freed that should
have been in releasing a file pointer on set_graph_function.
Then Thomas found that the ftrace trampolines were marked for
read/write as well as execute. To shrink the possible attack surface,
he added calls to set them to ro. Which also uncovered some other
issues with freeing module allocated memory that had its permissions
changed.
Kprobes had a similar issue which is fixed and a selftest was added to
trigger that issue again"
* tag 'trace-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
x86/ftrace: Make sure that ftrace trampolines are not RWX
x86/mm/ftrace: Do not bug in early boot on irqs_disabled in cpu_flush_range()
selftests/ftrace: Add a testcase for many kprobe events
kprobes/x86: Fix to set RWX bits correctly before releasing trampoline
ftrace: Fix memory leak in ftrace_graph_release()
When filename contains special chars, perf annotate fails
with an error:
$ perf annotate --vmlinux ./vmlinux\(test\) --stdio native_safe_halt
sh: -c: line 0: syntax error near unexpected token `('
sh: -c: line 0: `objdump --start-address=0xffffffff8184e840
--stop-address=0xffffffff8184e848 -l -d --no-show-raw -S -C
./vmlinux(test) 2>/dev/null|grep -v ./vmlinux(test):|expand'
Fix it by surrounding filename in double quotes.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Adam Stylinski <adam.stylinski@etegent.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/20170505101417.2117-1-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a testcase to test kprobes via ftrace interface
with many concurrent kprobe events.
This tries to add many kprobe events (up to 256) on
kernel functions. To avoid making ftrace-based
kprobes (kprobes on fentry), it skips first N bytes
(on x86 N=5, on ppc or arm N=4) of function entry.
After that, it enables all those events, disable it,
and remove it.
Since the unoptimization buffer reclaiming will
be delayed, after removing events, it will wait
enough time.
Link: http://lkml.kernel.org/r/149577388470.11702.11832460851769204511.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Overlapping changes in drivers/net/phy/marvell.c, bug fix in 'net'
restricting a HW workaround alongside cleanups in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds various verifier test cases:
1) A test case for the pruning issue when tracking alignment
is used.
2) Various PTR_TO_MAP_VALUE_OR_NULL tests to make sure pointer
arithmetic turns such register into UNKNOWN_VALUE type.
3) Test cases for the special treatment of LD_ABS/LD_IND to
make sure verifier doesn't break calling convention here.
Latter is needed, since f.e. arm64 JIT uses r1 - r5 for
storing temporary data, so they really must be marked as
NOT_INIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sync (copy) the following v4.12 kernel headers to the tooling headers:
arch/x86/include/asm/disabled-features.h:
arch/x86/include/uapi/asm/kvm.h:
arch/powerpc/include/uapi/asm/kvm.h:
arch/s390/include/uapi/asm/kvm.h:
arch/arm/include/uapi/asm/kvm.h:
arch/arm64/include/uapi/asm/kvm.h:
- 'struct kvm_sync_regs' got changed in an ABI-incompatible way,
fortunately none of the (in-kernel) tooling relied on it
- new KVM_DEV calls added
arch/x86/include/asm/required-features.h:
- 5-level paging hardware ABI detail added
arch/x86/include/asm/cpufeatures.h:
- new CPU feature added
arch/x86/include/uapi/asm/vmx.h:
- new VMX exit conditions
None of the changes requires fixes in the tooling source code.
This addresses the following warnings:
Warning: include/uapi/linux/stat.h differs from kernel
Warning: arch/x86/include/asm/disabled-features.h differs from kernel
Warning: arch/x86/include/asm/required-features.h differs from kernel
Warning: arch/x86/include/asm/cpufeatures.h differs from kernel
Warning: arch/x86/include/uapi/asm/kvm.h differs from kernel
Warning: arch/x86/include/uapi/asm/vmx.h differs from kernel
Warning: arch/powerpc/include/uapi/asm/kvm.h differs from kernel
Warning: arch/s390/include/uapi/asm/kvm.h differs from kernel
Warning: arch/arm/include/uapi/asm/kvm.h differs from kernel
Warning: arch/arm64/include/uapi/asm/kvm.h differs from kernel
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524065721.j2mlch6bgk5klgbc@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The __hpp__sort_acc() sorts entries using callchain depth in order to
put callers above in children mode. But it assumed the callchain order
was callee-first. Now default (for children) is caller-first so the
order of entries is reverted.
For example, consider following case:
$ perf report --no-children
..l
# Overhead Command Shared Object Symbol
# ........ ....... ................... ..........................
#
99.44% a.out a.out [.] main
|
---main
__libc_start_main
_start
Then children mode should show 'start' above '__libc_start_main' since
it's the caller (parent) of the __libc_start_main. But it's reversed:
# Children Self Command Shared Object Symbol
# ........ ........ ....... ............... .....................
#
99.61% 0.00% a.out libc-2.25.so [.] __libc_start_main
99.61% 0.00% a.out a.out [.] _start
99.54% 99.44% a.out a.out [.] main
This patch fixes it.
# Children Self Command Shared Object Symbol
# ........ ........ ....... ............... .....................
#
99.61% 0.00% a.out a.out [.] _start
99.61% 0.00% a.out libc-2.25.so [.] __libc_start_main
99.54% 99.44% a.out a.out [.] main
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-8-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The very last inlined frame, i.e. the one furthest away from the
non-inlined frame, was silently dropped. This is apparent when
comparing the output of `perf script` and `addr2line`:
~~~~~~
$ perf script --inline
...
a.out 26722 80836.309329: 72425 cycles:
21561 __hypot_finite (/usr/lib/libm-2.25.so)
ace3 hypot (/usr/lib/libm-2.25.so)
a4a main (a.out)
std::abs<double>
std::_Norm_helper<true>::_S_do_it<double>
std::norm<double>
main
20510 __libc_start_main (/usr/lib/libc-2.25.so)
bd9 _start (a.out)
$ addr2line -a -f -i -e /tmp/a.out a4a | c++filt
0x0000000000000a4a
std::__complex_abs(doublecomplex )
/usr/include/c++/6.3.1/complex:589
double std::abs<double>(std::complex<double> const&)
/usr/include/c++/6.3.1/complex:597
double std::_Norm_helper<true>::_S_do_it<double>(std::complex<double> const&)
/usr/include/c++/6.3.1/complex:654
double std::norm<double>(std::complex<double> const&)
/usr/include/c++/6.3.1/complex:664
main
/tmp/inlining.cpp:14
~~~~~
Note how `std::__complex_abs` is missing from the `perf script`
output. This is similarly showing up in `perf report`. The patch
here fixes this issue, and the output becomes:
~~~~~
a.out 26722 80836.309329: 72425 cycles:
21561 __hypot_finite (/usr/lib/libm-2.25.so)
ace3 hypot (/usr/lib/libm-2.25.so)
a4a main (a.out)
std::__complex_abs
std::abs<double>
std::_Norm_helper<true>::_S_do_it<double>
std::norm<double>
main
20510 __libc_start_main (/usr/lib/libc-2.25.so)
bd9 _start (a.out)
~~~~~
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-7-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Adrian Hunter