Using the 'start' and 'end' which are stored in struct perf_mmap to
replace the temporary 'start' and 'end'.
The temporary variables will be discarded later.
It doesn't need to pass 'overwrite' to perf_mmap__push(). It's stored in
struct perf_mmap.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-3-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is too much boilerplate in the perf_mmap__read*() interfaces.
The 'start' and 'end' variables should be stored in struct perf_mmap at
initialization. They will be used later.
The old 'startp' and 'endp' pointers are used by perf_mmap__read_event()
now. They cannot be removed. So the old 'startp/endp' and new
'md->start/md->end' will exist simultaneously now. The old one will be
removed later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It has been determined that the map is for overwrite mode
(evlist->overwrite_mmap) or non-overwrite mode (evlist->mmap) when
calling perf_evlist__alloc_mmap().
Store the information in struct perf_mmap, which will be used later to
simplify the perf_mmap__read*() interfaces.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Auto-merge for these events was disabled when auto-merging of non-alias
events was disabled in commit 63ce844 (perf stat: Only auto-merge events
that are PMU aliases).
Non-merging of legacy events is preserved:
$ perf stat -ag -e cache-misses,cache-misses sleep 1
Performance counter stats for 'system wide':
86,323 cache-misses
86,323 cache-misses
1.002623307 seconds time elapsed
But prefix or glob matching auto-merges the events created:
$ perf stat -a -e l3cache/read-miss/ sleep 1
Performance counter stats for 'system wide':
328 l3cache/read-miss/
1.002627008 seconds time elapsed
$ perf stat -a -e l3cache_0_[01]/read-miss/ sleep 1
Performance counter stats for 'system wide':
172 l3cache/read-miss/
1.002627008 seconds time elapsed
As with events created with aliases, auto-merging can be suppressed with
the --no-merge option:
$ perf stat -a -e l3cache/read-miss/ --no-merge sleep 1
Performance counter stats for 'system wide':
67 l3cache/read-miss/
67 l3cache/read-miss/
63 l3cache/read-miss/
60 l3cache/read-miss/
1.002622192 seconds time elapsed
Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timur Tabi <timur@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Change-Id: I0a47eed54c05e1982ca964d743b37f50f60c508c
Link: http://lkml.kernel.org/r/1520345084-42646-4-git-send-email-agustinv@codeaurora.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To simplify creation of events accross multiple instances of the same
type of PMU stat supports two methods for creating multiple events from
a single event specification:
1. A prefix or glob can be used in the PMU name.
2. Aliases, which are listed immediately after the Kernel PMU events
by perf list, are used.
When the --no-merge option is passed and these events are displayed
individually the PMU name is lost and it's not possible to see which
count corresponds to which pmu:
$ perf stat -a -e l3cache/read-miss/ --no-merge ls > /dev/null
Performance counter stats for 'system wide':
67 l3cache/read-miss/
67 l3cache/read-miss/
63 l3cache/read-miss/
60 l3cache/read-miss/
0.001675706 seconds time elapsed
$ perf stat -a -e l3cache_read_miss --no-merge ls > /dev/null
Performance counter stats for 'system wide':
12 l3cache_read_miss
17 l3cache_read_miss
10 l3cache_read_miss
8 l3cache_read_miss
0.001661305 seconds time elapsed
This change adds the original pmu name to the event. For dynamic pmu
events the pmu name is restored in the event name:
$ perf stat -a -e l3cache/read-miss/ --no-merge ls > /dev/null
Performance counter stats for 'system wide':
63 l3cache_0_3/read-miss/
74 l3cache_0_1/read-miss/
64 l3cache_0_2/read-miss/
74 l3cache_0_0/read-miss/
0.001675706 seconds time elapsed
For alias events the name is added after the event name:
$ perf stat -a -e l3cache_read_miss --no-merge ls > /dev/null
Performance counter stats for 'system wide':
10 l3cache_read_miss [l3cache_0_3]
12 l3cache_read_miss [l3cache_0_1]
10 l3cache_read_miss [l3cache_0_2]
17 l3cache_read_miss [l3cache_0_0]
0.001661305 seconds time elapsed
Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timur Tabi <timur@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Change-Id: I8056b9eda74bda33e95065056167ad96e97cb1fb
Link: http://lkml.kernel.org/r/1520345084-42646-3-git-send-email-agustinv@codeaurora.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Starting on v4.12 event parsing code for dynamic pmu events already
supports prefix-based matching of multiple pmus when creating dynamic
events. E.g., in a system with the following dynamic pmus:
mypmu_0
mypmu_1
mypmu_2
mypmu_4
passing mypmu/<config>/ as an event spec will result in the creation of
the event in all of the pmus. This change expands this matching through
the use of fnmatch so glob-like expressions can be used to create events
in multiple pmus. E.g., in the system described above if a user only
wants to create the event in mypmu_0 and mypmu_1, mypmu_[01]/<config>/
can be passed.
Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timur Tabi <timur@codeaurora.org>
Change-Id: Icb25653fc5d5239c20f3bffdfdf4ab4c9c9bb20b
Link: http://lkml.kernel.org/r/1520454947-16977-1-git-send-email-agustinv@codeaurora.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I've tested to process the perf man pages with asciidoctor that is
picker than asciidoc, and it revealed minor syntax errors in some
documents. Namely, the title markers aren't aligned with the previous
line, hence asciidoctor didn't recognize as titles.
This patch corrects these markers to be processed properly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307105441.28512-1-tiwai@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for supporting AUX area sampling buffers,
auxtrace_queues__add_buffer() needs to be more generic. To that end, make
it return buffer_ptr instead of the caller.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename some buffer-queuing functions in preparation for supporting AUX area
sampling buffers.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One can set a cgroup as a default cgroup to be used by all events or
set cgroups with the 'perf stat' and 'perf record' behaviour, i.e.
'-G A' will be the cgroup for events defined so far in the command line.
Here in my main machine, with a kvm instance running a rhel6 guinea pig
I have:
# ls -la /sys/fs/cgroup/perf_event/ | grep drw
drwxr-xr-x. 14 root root 360 Mar 6 12:04 ..
drwxr-xr-x. 3 root root 0 Mar 6 15:05 machine.slice
#
So I can go ahead and use that cgroup hierarchy, say lets see what
syscalls are being emitted by threads in that 'machine.slice' hierarchy
that are taking more than 100ms:
# perf trace --duration 100 -G machine.slice
0.188 (249.850 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
250.274 (249.743 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
500.224 (249.755 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
750.097 (249.934 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
1000.244 (249.780 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
1250.197 (249.796 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
1500.124 (249.859 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
1750.076 (172.900 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
902.570 (1021.116 ms): qemu-system-x8/23667 ppoll(ufds: 0x558151e03180, nfds: 74, tsp: 0x7ffc00cd0900, sigsetsize: 8) = 1
1923.825 (305.133 ms): qemu-system-x8/23667 ppoll(ufds: 0x558151e03180, nfds: 74, tsp: 0x7ffc00cd0900, sigsetsize: 8) = 1
2000.172 (229.002 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
^C #
If we look inside that cgroup hierarchy we get:
# ls -la /sys/fs/cgroup/perf_event/machine.slice/ | grep drw
drwxr-xr-x. 3 root root 0 Mar 6 15:05 .
drwxr-xr-x. 2 root root 0 Mar 6 16:16 machine-qemu\x2d2\x2drhel6.sandy.scope
#
There is just one, but lets say there were more and we would want to see
5 seconds worth of syscall summary for the threads in that cgroup:
# perf trace --summary -G machine.slice/machine-qemu\\x2d2\\x2drhel6.sandy.scope/ -a sleep 5
Summary of events:
qemu-system-x86 (23667), 143858 events, 24.2%
syscall calls total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- --------- --------- --------- --------- ------
ppoll 28492 4348.631 0.000 0.153 11.616 1.05%
futex 19661 140.801 0.001 0.007 2.993 3.20%
read 18440 68.084 0.001 0.004 1.653 4.33%
ioctl 5387 24.768 0.002 0.005 0.134 1.62%
CPU 0/KVM (23744), 449455 events, 75.8%
syscall calls total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- --------- --------- --------- --------- ------
ioctl 148364 3401.812 0.000 0.023 11.801 1.15%
futex 36131 404.127 0.001 0.011 7.377 2.63%
writev 29452 339.688 0.003 0.012 1.740 1.36%
write 11315 45.992 0.001 0.004 0.105 1.10%
#
See the documentation about how to set more than one cgroup for
different events in the same command line.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-t126jh4occqvu0xdqlcjygex@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The usual thing is for a constructor to allocate space for its members,
not to require that the caller pass a pre-allocated 'name' and then, at
its destructor, to free something not allocated by it.
Fix it by making cgroup__new() to receive a const char pointer, then
allocate cgroup->name that then can continue to be freed at
cgroup__delete(), balancing the alloc/free operations inside the cgroup
struct methods.
This eases calling evlist__findnew_cgroup() from the custom 'perf trace'
cgroup parser, that will only call parse_cgroups() when the '-G cgroup'
is passed on the command line after '-e event' entries, when it'll
behave just like 'perf stat' and 'perf record', i.e. the previous
parse_cgroup() users that mandate that -G only can come after a -e.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-4leugnuyqi10t98990o3xi1t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that tools like 'perf trace' can allow the user to set a cgroup
to be used for all the evsels still without a crgroup setup by
parse_cgroups(), such as the one to use for the syscalls, vfs_getname
and other events involved in strace like syscall tracing.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zf9jjsbj661r3lk6qb7g8j70@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to machine__findnew_thread(), etc, i.e. try to find, get a
refcount if found and return it, otherwise return a new cgroup object.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-im1omevlihhyneiic4nl3g24@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for adding AUX area sampling support, combine some
auxtrace initialization into a single function.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The thread::shortname only used by sched command, so move it to sched
private structure.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1520307457-23668-2-git-send-email-changbin.du@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To follow the namespacing convention in tools/perf.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-jaalyl6bkvvji4r5u8wqw4n4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To break down complexity in add_cgroup().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-5yqshcf5hm837n7c86u7lhjf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The refcount operation counterpart to cgroup__put(), use it when reusing
a cgroup.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-14ynvrl7y2cz8gyuy5q5v41g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is not really closing the cgroup, but instead dropping a reference
count and if it hits zero, then calling delete, which will, among other
cleanup shores, close the cgroup fd.
So it is really dropping a reference to that cgroup, and the method name
for that is "put", so rename close_cgroup() to cgroup__put() to follow
this naming convention.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-sccxpnd7bgwc1llgokt6fcey@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just to make this code look more like other places in tools/perf.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-j3j72vvn2d5j7tenlghdy195@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That name isn't used, is shorter, lets switch to it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-e51yphwgvepd1y4f5fjptmjq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'opt' parameter in parse_cgroups() _is_ used. The original patch
used '__used' that was even more confusing :-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 023695d96e ("perf tool: Add cgroup support")
Link: https://lkml.kernel.org/n/tip-4jo2puz0empkoou6bbq460tl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
trigger_on() means that the trigger is available but not ready, however
trigger_on() was making it ready. That can segfault if the signal comes
before trigger_ready(). e.g. (USR2 signal delivery not shown)
$ perf record -e intel_pt//u -S sleep 1
perf: Segmentation fault
Obtained 16 stack frames.
/home/ahunter/bin/perf(sighandler_dump_stack+0x40) [0x4ec550]
/lib/x86_64-linux-gnu/libc.so.6(+0x36caf) [0x7fa76411acaf]
/home/ahunter/bin/perf(perf_evsel__disable+0x26) [0x4b9dd6]
/home/ahunter/bin/perf() [0x43a45b]
/lib/x86_64-linux-gnu/libc.so.6(+0x36caf) [0x7fa76411acaf]
/lib/x86_64-linux-gnu/libc.so.6(__xstat64+0x15) [0x7fa7641d2cc5]
/home/ahunter/bin/perf() [0x4ec6c9]
/home/ahunter/bin/perf() [0x4ec73b]
/home/ahunter/bin/perf() [0x4ec73b]
/home/ahunter/bin/perf() [0x4ec73b]
/home/ahunter/bin/perf() [0x4eca15]
/home/ahunter/bin/perf(machine__create_kernel_maps+0x257) [0x4f0b77]
/home/ahunter/bin/perf(perf_session__new+0xc0) [0x4f86f0]
/home/ahunter/bin/perf(cmd_record+0x722) [0x43c132]
/home/ahunter/bin/perf() [0x4a11ae]
/home/ahunter/bin/perf(main+0x5d4) [0x427fb4]
Note, for testing purposes, this is hard to hit unless you add some sleep()
in builtin-record.c before record__open().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org
Fixes: 3dcc4436fa ("perf tools: Introduce trigger class")
Link: http://lkml.kernel.org/r/1519807144-30694-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Prevent auxtrace_queues__process_index() from queuing AUX area data for
decoding when the --no-itrace option has been used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When printing stats in CSV mode, 'perf stat' appends extra separators
when a counter is not supported:
<not supported>,,L1-dcache-store-misses,mesos/bd442f34-2b4a-47df-b966-9b281f9f56fc,0,100.00,,,,
Which causes a failure when parsing fields. The numbers of separators
should be the same for each line, no matter if the counter is or not
supported.
Signed-off-by: Ilya Pronin <ipronin@twitter.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20180306064353.31930-1-xiyou.wangcong@gmail.com
Fixes: 92a61f6412 ("perf stat: Implement CSV metrics output")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Be more robust when drawing arrows in the annotation TUI, avoiding a
segfault when jump instructions have as a target addresses in functions
other that the one currently being annotated. The full fix will come in
the following days, when jumping to other functions will work as call
instructions (Arnaldo Carvalho de Melo)
- Allow asking for the maximum allowed sample rate in 'top' and
'record', i.e. 'perf record -F max' will read the
kernel.perf_event_max_sample_rate sysctl and use it (Arnaldo Carvalho de Melo)
- When the user specifies a freq above kernel.perf_event_max_sample_rate,
Throttle it down to that max freq, and warn the user about it, add as
well --strict-freq so that the previous behaviour of not starting the
session when the desired freq can't be used can be selected (Arnaldo Carvalho de Melo)
- Find 'call' instruction target symbol at parsing time, used so far in
the TUI, part of the infrastructure changes that will end up allowing
for jumps to navigate to other functions, just like 'call'
instructions. (Arnaldo Carvalho de Melo)
- Use xyarray dimensions to iterate fds in 'perf stat' (Andi Kleen)
- Ignore threads for which the current user hasn't permissions when
enabling system-wide --per-thread (Jin Yao)
- Fix some backtrace perf test cases to use 'perf record' + 'perf script'
instead, till 'perf trace' starts using ordered_events or equivalent
to avoid symbol resolving artifacts due to reordering of
PERF_RECORD_MMAP events (Jiri Olsa)
- Fix crash in 'perf record' pipe mode, it needs to allocate the ID
array even for a single event, unlike non-pipe mode (Jiri Olsa)
- Make annoying fallback message on older kernels with newer 'perf top'
binaries trying to use overwrite mode and that not being present
in the older kernels (Kan Liang)
- Switch last users of old APIs to the newer perf_mmap__read_event()
one, then discard those old mmap read forward APIs (Kan Liang)
- Fix the usage on the 'perf kallsyms' man page (Sangwon Hong)
- Simplify cgroup arguments when tracking multiple events (weiping zhang)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=TNRi
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.17-20180305' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- Be more robust when drawing arrows in the annotation TUI, avoiding a
segfault when jump instructions have as a target addresses in functions
other that the one currently being annotated. The full fix will come in
the following days, when jumping to other functions will work as call
instructions (Arnaldo Carvalho de Melo)
- Allow asking for the maximum allowed sample rate in 'top' and
'record', i.e. 'perf record -F max' will read the
kernel.perf_event_max_sample_rate sysctl and use it (Arnaldo Carvalho de Melo)
- When the user specifies a freq above kernel.perf_event_max_sample_rate,
Throttle it down to that max freq, and warn the user about it, add as
well --strict-freq so that the previous behaviour of not starting the
session when the desired freq can't be used can be selected (Arnaldo Carvalho de Melo)
- Find 'call' instruction target symbol at parsing time, used so far in
the TUI, part of the infrastructure changes that will end up allowing
for jumps to navigate to other functions, just like 'call'
instructions. (Arnaldo Carvalho de Melo)
- Use xyarray dimensions to iterate fds in 'perf stat' (Andi Kleen)
- Ignore threads for which the current user hasn't permissions when
enabling system-wide --per-thread (Jin Yao)
- Fix some backtrace perf test cases to use 'perf record' + 'perf script'
instead, till 'perf trace' starts using ordered_events or equivalent
to avoid symbol resolving artifacts due to reordering of
PERF_RECORD_MMAP events (Jiri Olsa)
- Fix crash in 'perf record' pipe mode, it needs to allocate the ID
array even for a single event, unlike non-pipe mode (Jiri Olsa)
- Make annoying fallback message on older kernels with newer 'perf top'
binaries trying to use overwrite mode and that not being present
in the older kernels (Kan Liang)
- Switch last users of old APIs to the newer perf_mmap__read_event()
one, then discard those old mmap read forward APIs (Kan Liang)
- Fix the usage on the 'perf kallsyms' man page (Sangwon Hong)
- Simplify cgroup arguments when tracking multiple events (weiping zhang)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The changes in dd84441a79 ("x86/speculation: Use IBRS if available
before calling into firmware") don't need any kind of special treatment
in the current tools/perf/ codebase, so just update the copy to get rid
of the perf build warning:
BUILD: Doing 'make -j4' parallel build
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-mzmuxocrf96v922xkerey3ns@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we can crash perf record when running in pipe mode, like:
$ perf record ls | perf report
# To display the perf.data header info, please use --header/--header-only options.
#
perf: Segmentation fault
Error:
The - file has no samples!
The callstack of the crash is:
0x0000000000515242 in perf_event__synthesize_event_update_name
3513 ev = event_update_event__new(len + 1, PERF_EVENT_UPDATE__NAME, evsel->id[0]);
(gdb) bt
#0 0x0000000000515242 in perf_event__synthesize_event_update_name
#1 0x00000000005158a4 in perf_event__synthesize_extra_attr
#2 0x0000000000443347 in record__synthesize
#3 0x00000000004438e3 in __cmd_record
#4 0x000000000044514e in cmd_record
#5 0x00000000004cbc95 in run_builtin
#6 0x00000000004cbf02 in handle_internal_command
#7 0x00000000004cc054 in run_argv
#8 0x00000000004cc422 in main
The reason of the crash is that the evsel does not have ids array
allocated and the pipe's synthesize code tries to access it.
We don't force evsel ids allocation when we have single event, because
it's not needed. However we need it when we are in pipe mode even for
single event as a key for evsel update event.
Fixing this by forcing evsel ids allocation event for single event, when
we are in pipe mode.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180302161354.30192-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This first happened with a gcc function, _cpp_lex_token, that has the
usual jumps:
│1159e6c: ↓ jne 115aa32 <_cpp_lex_token@@Base+0xf92>
I.e. jumps to a label inside that function (_cpp_lex_token), and those
works, but also this kind:
│1159e8b: ↓ jne c469be <cpp_named_operator2name@@Base+0xa72>
I.e. jumps to another function, outside _cpp_lex_token, which are not
being correctly handled generating as a side effect references to
ab->offset[] entries that are set to NULL, so to make this code more
robust, check that here.
A proper fix for will be put in place, looking at the function name
right after the '<' token and probably treating this like a 'call'
instruction.
For now just don't draw the arrow.
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: https://lkml.kernel.org/n/tip-5tzvb875ep2sel03aeefgmud@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On older (e.g. v4.4) kernels, an annoying fallback message can be
observed in 'perf top':
┌─Warning:──────────────────────┐
│fall back to non-overwrite mode│
│ │
│ │
│Press any key... │
└───────────────────────────────┘
The 'perf top' utility has been changed to overwrite mode since commit
ebebbf0823 ("perf top: Switch default mode to overwrite mode").
For older kernels which don't have overwrite mode support, 'perf top'
will fall back to non-overwrite mode and print out the fallback message
using ui__warning(), which needs user's input to close.
The fallback message is not critical for end users. Turning it to debug
message which is printed when running with -vv.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Fixes: ebebbf0823 ("perf top: Switch default mode to overwrite mode")
Link: http://lkml.kernel.org/r/1519669030-176549-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
First, all man pages highlight only perf and subcommands except 'perf
kallsyms', which includes the full usage. Fix it for commands to
monopolize underlines.
Second, options can be ommited when executing 'perf kallsyms', so add
square brackets between <option>.
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1518377864-20353-1-git-send-email-qpakzk@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Discards legacy interfaces perf_evlist__mmap_read_forward(),
perf_evlist__mmap_read() and perf_evlist__mmap_consume().
No tools use them.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-14-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'task-exit' still use the legacy interface.
No functional change.
Committer notes:
Testing it:
# perf test exit
21: Number of exit events of a simple workload : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-13-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'switch-tracking' still use the legacy interface.
No functional change.
Committer testing:
# perf test switch
32: Track with sched_switch : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-12-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'sw-clock' still use the legacy interface.
No functional change.
Committer testing:
# perf test clock
22: Software clock events period values : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-11-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'time-to-tsc' still use the legacy interface.
No functional change.
Commiter notes:
Testing it:
# perf test tsc
57: Convert perf time to TSC : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-10-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'perf-record' still use the legacy interface.
No functional change.
Committer notes:
Testing it:
# perf test PERF_RECORD
8: PERF_RECORD_* events & perf_sample fields : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-9-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'syscalls:sys_enter_openat event fields' still use the
legacy interface.
No functional change.
Committer notes:
Testing it:
# perf test sys_enter_openat
15: syscalls:sys_enter_openat event fields : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-8-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'mmap-basic' still use the legacy interface.
No functional change.
Committer notes:
Testing it:
# perf test "mmap interface"
4: Read samples using the mmap interface : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-7-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'keep tracking' still use the legacy interface.
No functional change.
Committer testing:
# perf test tracking
25: Use a dummy software event to keep tracking : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-6-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'object code reading' still use the legacy interface.
No functional change.
Committer notes:
Testing:
# perf test reading
23: Object code reading: Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-5-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'bpf' still use the legacy interface.
No functional change.
Committer notes:
Tested with:
# perf test bpf
39: BPF filter :
39.1: Basic BPF filtering : Ok
39.2: BPF pinning : Ok
39.3: BPF prologue generation : Ok
39.4: BPF relocation checker : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-4-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf trace' utility still use the legacy interface.
Switch to the new perf_mmap__read_event() interface.
No functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-2-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf kvm still use the legacy interface.
Switch to the new perf_mmap__read_event() interface for perf kvm.
No functional change.
Committer notes:
Tested before and after running:
# perf kvm stat record
On a machine with a kvm guest, then used:
# perf kvm stat report
Before/after results match and look like:
# perf kvm stat record -a sleep 5
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.132 MB perf.data.guest (1828 samples) ]
# perf kvm stat report
Analyze events for all VMs, all VCPUs:
VM-EXIT Samples Samples% Time% Min Time Max Time Avg time
IO_INSTRUCTION 258 40.06% 0.08% 3.51us 122.54us 14.87us (+- 6.76%)
MSR_WRITE 178 27.64% 0.01% 0.47us 6.34us 2.18us (+- 4.80%)
EPT_MISCONFIG 148 22.98% 0.03% 3.76us 65.60us 11.22us (+- 8.14%)
HLT 47 7.30% 99.88% 181.69us 249988.06us 102061.36us (+-13.49%)
PAUSE_INSTRUCTION 5 0.78% 0.00% 0.38us 0.79us 0.47us (+-17.05%)
MSR_READ 4 0.62% 0.00% 1.14us 3.33us 2.67us (+-19.35%)
EXTERNAL_INTERRUPT 2 0.31% 0.00% 2.15us 2.17us 2.16us (+- 0.30%)
PENDING_INTERRUPT 1 0.16% 0.00% 2.56us 2.56us 2.56us (+- 0.00%)
PREEMPTION_TIMER 1 0.16% 0.00% 3.21us 3.21us 3.21us (+- 0.00%)
Total Samples:644, Total events handled time:4802790.72us.
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-1-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kan Liang