mirror of https://gitee.com/openkylin/linux.git
193 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Peter Zijlstra
|
6e2df0581f |
sched: Fix pick_next_task() vs 'change' pattern race
Commit |
|
|
Linus Torvalds
|
7f2444d38f |
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core timer updates from Thomas Gleixner:
"Timers and timekeeping updates:
- A large overhaul of the posix CPU timer code which is a preparation
for moving the CPU timer expiry out into task work so it can be
properly accounted on the task/process.
An update to the bogus permission checks will come later during the
merge window as feedback was not complete before heading of for
travel.
- Switch the timerqueue code to use cached rbtrees and get rid of the
homebrewn caching of the leftmost node.
- Consolidate hrtimer_init() + hrtimer_init_sleeper() calls into a
single function
- Implement the separation of hrtimers to be forced to expire in hard
interrupt context even when PREEMPT_RT is enabled and mark the
affected timers accordingly.
- Implement a mechanism for hrtimers and the timer wheel to protect
RT against priority inversion and live lock issues when a (hr)timer
which should be canceled is currently executing the callback.
Instead of infinitely spinning, the task which tries to cancel the
timer blocks on a per cpu base expiry lock which is held and
released by the (hr)timer expiry code.
- Enable the Hyper-V TSC page based sched_clock for Hyper-V guests
resulting in faster access to timekeeping functions.
- Updates to various clocksource/clockevent drivers and their device
tree bindings.
- The usual small improvements all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits)
posix-cpu-timers: Fix permission check regression
posix-cpu-timers: Always clear head pointer on dequeue
hrtimer: Add a missing bracket and hide `migration_base' on !SMP
posix-cpu-timers: Make expiry_active check actually work correctly
posix-timers: Unbreak CONFIG_POSIX_TIMERS=n build
tick: Mark sched_timer to expire in hard interrupt context
hrtimer: Add kernel doc annotation for HRTIMER_MODE_HARD
x86/hyperv: Hide pv_ops access for CONFIG_PARAVIRT=n
posix-cpu-timers: Utilize timerqueue for storage
posix-cpu-timers: Move state tracking to struct posix_cputimers
posix-cpu-timers: Deduplicate rlimit handling
posix-cpu-timers: Remove pointless comparisons
posix-cpu-timers: Get rid of 64bit divisions
posix-cpu-timers: Consolidate timer expiry further
posix-cpu-timers: Get rid of zero checks
rlimit: Rewrite non-sensical RLIMIT_CPU comment
posix-cpu-timers: Respect INFINITY for hard RTTIME limit
posix-cpu-timers: Switch thread group sampling to array
posix-cpu-timers: Restructure expiry array
posix-cpu-timers: Remove cputime_expires
...
|
|
|
Linus Torvalds
|
7e67a85999 |
Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- MAINTAINERS: Add Mark Rutland as perf submaintainer, Juri Lelli and
Vincent Guittot as scheduler submaintainers. Add Dietmar Eggemann,
Steven Rostedt, Ben Segall and Mel Gorman as scheduler reviewers.
As perf and the scheduler is getting bigger and more complex,
document the status quo of current responsibilities and interests,
and spread the review pain^H^H^H^H fun via an increase in the Cc:
linecount generated by scripts/get_maintainer.pl. :-)
- Add another series of patches that brings the -rt (PREEMPT_RT) tree
closer to mainline: split the monolithic CONFIG_PREEMPT dependencies
into a new CONFIG_PREEMPTION category that will allow the eventual
introduction of CONFIG_PREEMPT_RT. Still a few more hundred patches
to go though.
- Extend the CPU cgroup controller with uclamp.min and uclamp.max to
allow the finer shaping of CPU bandwidth usage.
- Micro-optimize energy-aware wake-ups from O(CPUS^2) to O(CPUS).
- Improve the behavior of high CPU count, high thread count
applications running under cpu.cfs_quota_us constraints.
- Improve balancing with SCHED_IDLE (SCHED_BATCH) tasks present.
- Improve CPU isolation housekeeping CPU allocation NUMA locality.
- Fix deadline scheduler bandwidth calculations and logic when cpusets
rebuilds the topology, or when it gets deadline-throttled while it's
being offlined.
- Convert the cpuset_mutex to percpu_rwsem, to allow it to be used from
setscheduler() system calls without creating global serialization.
Add new synchronization between cpuset topology-changing events and
the deadline acceptance tests in setscheduler(), which were broken
before.
- Rework the active_mm state machine to be less confusing and more
optimal.
- Rework (simplify) the pick_next_task() slowpath.
- Improve load-balancing on AMD EPYC systems.
- ... and misc cleanups, smaller fixes and improvements - please see
the Git log for more details.
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
sched/psi: Correct overly pessimistic size calculation
sched/fair: Speed-up energy-aware wake-ups
sched/uclamp: Always use 'enum uclamp_id' for clamp_id values
sched/uclamp: Update CPU's refcount on TG's clamp changes
sched/uclamp: Use TG's clamps to restrict TASK's clamps
sched/uclamp: Propagate system defaults to the root group
sched/uclamp: Propagate parent clamps
sched/uclamp: Extend CPU's cgroup controller
sched/topology: Improve load balancing on AMD EPYC systems
arch, ia64: Make NUMA select SMP
sched, perf: MAINTAINERS update, add submaintainers and reviewers
sched/fair: Use rq_lock/unlock in online_fair_sched_group
cpufreq: schedutil: fix equation in comment
sched: Rework pick_next_task() slow-path
sched: Allow put_prev_task() to drop rq->lock
sched/fair: Expose newidle_balance()
sched: Add task_struct pointer to sched_class::set_curr_task
sched: Rework CPU hotplug task selection
sched/{rt,deadline}: Fix set_next_task vs pick_next_task
sched: Fix kerneldoc comment for ia64_set_curr_task
...
|
|
|
Peter Zijlstra
|
67692435c4 |
sched: Rework pick_next_task() slow-path
Avoid the RETRY_TASK case in the pick_next_task() slow path. By doing the put_prev_task() early, we get the rt/deadline pull done, and by testing rq->nr_running we know if we need newidle_balance(). This then gives a stable state to pick a task from. Since the fast-path is fair only; it means the other classes will always have pick_next_task(.prev=NULL, .rf=NULL) and we can simplify. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Aaron Lu <aaron.lwe@gmail.com> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: mingo@kernel.org Cc: Phil Auld <pauld@redhat.com> Cc: Julien Desfossez <jdesfossez@digitalocean.com> Cc: Nishanth Aravamudan <naravamudan@digitalocean.com> Link: https://lkml.kernel.org/r/aa34d24b36547139248f32a30138791ac6c02bd6.1559129225.git.vpillai@digitalocean.com |
|
|
Peter Zijlstra
|
5f2a45fc9e |
sched: Allow put_prev_task() to drop rq->lock
Currently the pick_next_task() loop is convoluted and ugly because of how it can drop the rq->lock and needs to restart the picking. For the RT/Deadline classes, it is put_prev_task() where we do balancing, and we could do this before the picking loop. Make this possible. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: Aaron Lu <aaron.lwe@gmail.com> Cc: mingo@kernel.org Cc: Phil Auld <pauld@redhat.com> Cc: Julien Desfossez <jdesfossez@digitalocean.com> Cc: Nishanth Aravamudan <naravamudan@digitalocean.com> Link: https://lkml.kernel.org/r/e4519f6850477ab7f3d257062796e6425ee4ba7c.1559129225.git.vpillai@digitalocean.com |
|
|
Peter Zijlstra
|
03b7fad167 |
sched: Add task_struct pointer to sched_class::set_curr_task
In preparation of further separating pick_next_task() and set_curr_task() we have to pass the actual task into it, while there, rename the thing to better pair with put_prev_task(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Aaron Lu <aaron.lwe@gmail.com> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: mingo@kernel.org Cc: Phil Auld <pauld@redhat.com> Cc: Julien Desfossez <jdesfossez@digitalocean.com> Cc: Nishanth Aravamudan <naravamudan@digitalocean.com> Link: https://lkml.kernel.org/r/a96d1bcdd716db4a4c5da2fece647a1456c0ed78.1559129225.git.vpillai@digitalocean.com |
|
|
Peter Zijlstra
|
f95d4eaee6 |
sched/{rt,deadline}: Fix set_next_task vs pick_next_task
Because pick_next_task() implies set_curr_task() and some of the details haven't mattered too much, some of what _should_ be in set_curr_task() ended up in pick_next_task, correct this. This prepares the way for a pick_next_task() variant that does not affect the current state; allowing remote picking. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Aaron Lu <aaron.lwe@gmail.com> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: mingo@kernel.org Cc: Phil Auld <pauld@redhat.com> Cc: Julien Desfossez <jdesfossez@digitalocean.com> Cc: Nishanth Aravamudan <naravamudan@digitalocean.com> Link: https://lkml.kernel.org/r/38c61d5240553e043c27c5e00b9dd0d184dd6081.1559129225.git.vpillai@digitalocean.com |
|
|
Dietmar Eggemann
|
f4904815f9 |
sched/deadline: Fix double accounting of rq/running bw in push & pull
{push,pull}_dl_task() always calls {de,}activate_task() with .flags=0
which sets p->on_rq=TASK_ON_RQ_MIGRATING.
{push,pull}_dl_task()->{de,}activate_task()->{de,en}queue_task()->
{de,en}queue_task_dl() calls {sub,add}_{running,rq}_bw() since
p->on_rq==TASK_ON_RQ_MIGRATING.
So {sub,add}_{running,rq}_bw() in {push,pull}_dl_task() is
double-accounting for that task.
Fix it by removing rq/running bw accounting in [push/pull]_dl_task().
Fixes:
|
|
|
Juri Lelli
|
850377a875 |
sched/deadline: Ensure inactive_timer runs in hardirq context
SCHED_DEADLINE inactive timer needs to run in hardirq context (as dl_task_timer already does) on PREEMPT_RT Change the mode to HRTIMER_MODE_REL_HARD. [ tglx: Fixed up the start site, so mode debugging works ] Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190731103715.4047-1-juri.lelli@redhat.com |
|
|
Sebastian Andrzej Siewior
|
d5096aa65a |
sched: Mark hrtimers to expire in hard interrupt context
The scheduler related hrtimers need to expire in hard interrupt context even on PREEMPT_RT enabled kernels. Mark then as such. No functional change. [ tglx: Split out from larger combo patch. Add changelog. ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20190726185753.077004842@linutronix.de |
|
|
Juri Lelli
|
59d06cea11 |
sched/deadline: Fix bandwidth accounting at all levels after offline migration
If a task happens to be throttled while the CPU it was running on gets hotplugged off, the bandwidth associated with the task is not correctly migrated with it when the replenishment timer fires (offline_migration). Fix things up, for this_bw, running_bw and total_bw, when replenishment timer fires and task is migrated (dl_task_offline_migration()). Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Cc: claudio@evidence.eu.com Cc: lizefan@huawei.com Cc: longman@redhat.com Cc: luca.abeni@santannapisa.it Cc: mathieu.poirier@linaro.org Cc: rostedt@goodmis.org Cc: tj@kernel.org Cc: tommaso.cucinotta@santannapisa.it Link: https://lkml.kernel.org/r/20190719140000.31694-5-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Mathieu Poirier
|
f9a25f776d |
cpusets: Rebuild root domain deadline accounting information
When the topology of root domains is modified by CPUset or CPUhotplug operations information about the current deadline bandwidth held in the root domain is lost. This patch addresses the issue by recalculating the lost deadline bandwidth information by circling through the deadline tasks held in CPUsets and adding their current load to the root domain they are associated with. Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> [ Various additional modifications. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Cc: claudio@evidence.eu.com Cc: lizefan@huawei.com Cc: longman@redhat.com Cc: luca.abeni@santannapisa.it Cc: rostedt@goodmis.org Cc: tj@kernel.org Cc: tommaso.cucinotta@santannapisa.it Link: https://lkml.kernel.org/r/20190719140000.31694-4-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Linus Torvalds
|
e9a83bd232 |
It's been a relatively busy cycle for docs:
- A fair pile of RST conversions, many from Mauro. These create more
than the usual number of simple but annoying merge conflicts with other
trees, unfortunately. He has a lot more of these waiting on the wings
that, I think, will go to you directly later on.
- A new document on how to use merges and rebases in kernel repos, and one
on Spectre vulnerabilities.
- Various improvements to the build system, including automatic markup of
function() references because some people, for reasons I will never
understand, were of the opinion that :c:func:``function()`` is
unattractive and not fun to type.
- We now recommend using sphinx 1.7, but still support back to 1.4.
- Lots of smaller improvements, warning fixes, typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl0krAEPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yg98H/AuLqO9LpOgUjF4LhyjxGPdzJkY9RExSJ7km
gznyreLCZgFaJR+AY6YDsd4Jw6OJlPbu1YM/Qo3C3WrZVFVhgL/s2ebvBgCo50A8
raAFd8jTf4/mGCHnAqRotAPQ3mETJUk315B66lBJ6Oc+YdpRhwXWq8ZW2bJxInFF
3HDvoFgMf0KhLuMHUkkL0u3fxH1iA+KvDu8diPbJYFjOdOWENz/CV8wqdVkXRSEW
DJxIq89h/7d+hIG3d1I7Nw+gibGsAdjSjKv4eRKauZs4Aoxd1Gpl62z0JNk6aT3m
dtq4joLdwScydonXROD/Twn2jsu4xYTrPwVzChomElMowW/ZBBY=
=D0eO
-----END PGP SIGNATURE-----
Merge tag 'docs-5.3' of git://git.lwn.net/linux
Pull Documentation updates from Jonathan Corbet:
"It's been a relatively busy cycle for docs:
- A fair pile of RST conversions, many from Mauro. These create more
than the usual number of simple but annoying merge conflicts with
other trees, unfortunately. He has a lot more of these waiting on
the wings that, I think, will go to you directly later on.
- A new document on how to use merges and rebases in kernel repos,
and one on Spectre vulnerabilities.
- Various improvements to the build system, including automatic
markup of function() references because some people, for reasons I
will never understand, were of the opinion that
:c:func:``function()`` is unattractive and not fun to type.
- We now recommend using sphinx 1.7, but still support back to 1.4.
- Lots of smaller improvements, warning fixes, typo fixes, etc"
* tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits)
docs: automarkup.py: ignore exceptions when seeking for xrefs
docs: Move binderfs to admin-guide
Disable Sphinx SmartyPants in HTML output
doc: RCU callback locks need only _bh, not necessarily _irq
docs: format kernel-parameters -- as code
Doc : doc-guide : Fix a typo
platform: x86: get rid of a non-existent document
Add the RCU docs to the core-api manual
Documentation: RCU: Add TOC tree hooks
Documentation: RCU: Rename txt files to rst
Documentation: RCU: Convert RCU UP systems to reST
Documentation: RCU: Convert RCU linked list to reST
Documentation: RCU: Convert RCU basic concepts to reST
docs: filesystems: Remove uneeded .rst extension on toctables
scripts/sphinx-pre-install: fix out-of-tree build
docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/
Documentation: PGP: update for newer HW devices
Documentation: Add section about CPU vulnerabilities for Spectre
Documentation: platform: Delete x86-laptop-drivers.txt
docs: Note that :c:func: should no longer be used
...
|
|
|
Vincent Guittot
|
8ec59c0f5f |
sched/topology: Remove unused 'sd' parameter from arch_scale_cpu_capacity()
The 'struct sched_domain *sd' parameter to arch_scale_cpu_capacity() is
unused since commit:
|
|
|
Mauro Carvalho Chehab
|
d6a3b24762 |
docs: scheduler: convert docs to ReST and rename to *.rst
In order to prepare to add them to the Kernel API book, convert the files to ReST format. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
|
|
Sebastian Andrzej Siewior
|
3bd3706251 |
sched/core: Provide a pointer to the valid CPU mask
In commit:
|
|
|
luca abeni
|
1b02cd6a2d |
sched/deadline: Correctly handle active 0-lag timers
syzbot reported the following warning: [ ] WARNING: CPU: 4 PID: 17089 at kernel/sched/deadline.c:255 task_non_contending+0xae0/0x1950 line 255 of deadline.c is: WARN_ON(hrtimer_active(&dl_se->inactive_timer)); in task_non_contending(). Unfortunately, in some cases (for example, a deadline task continuosly blocking and waking immediately) it can happen that a task blocks (and task_non_contending() is called) while the 0-lag timer is still active. In this case, the safest thing to do is to immediately decrease the running bandwidth of the task, without trying to re-arm the 0-lag timer. Signed-off-by: luca abeni <luca.abeni@santannapisa.it> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: chengjian (D) <cj.chengjian@huawei.com> Link: https://lkml.kernel.org/r/20190325131530.34706-1-luca.abeni@santannapisa.it Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Vincent Guittot
|
2312729688 |
sched/fair: Update scale invariance of PELT
The current implementation of load tracking invariance scales the
contribution with current frequency and uarch performance (only for
utilization) of the CPU. One main result of this formula is that the
figures are capped by current capacity of CPU. Another one is that the
load_avg is not invariant because not scaled with uarch.
The util_avg of a periodic task that runs r time slots every p time slots
varies in the range :
U * (1-y^r)/(1-y^p) * y^i < Utilization < U * (1-y^r)/(1-y^p)
with U is the max util_avg value = SCHED_CAPACITY_SCALE
At a lower capacity, the range becomes:
U * C * (1-y^r')/(1-y^p) * y^i' < Utilization < U * C * (1-y^r')/(1-y^p)
with C reflecting the compute capacity ratio between current capacity and
max capacity.
so C tries to compensate changes in (1-y^r') but it can't be accurate.
Instead of scaling the contribution value of PELT algo, we should scale the
running time. The PELT signal aims to track the amount of computation of
tasks and/or rq so it seems more correct to scale the running time to
reflect the effective amount of computation done since the last update.
In order to be fully invariant, we need to apply the same amount of
running time and idle time whatever the current capacity. Because running
at lower capacity implies that the task will run longer, we have to ensure
that the same amount of idle time will be applied when system becomes idle
and no idle time has been "stolen". But reaching the maximum utilization
value (SCHED_CAPACITY_SCALE) means that the task is seen as an
always-running task whatever the capacity of the CPU (even at max compute
capacity). In this case, we can discard this "stolen" idle times which
becomes meaningless.
In order to achieve this time scaling, a new clock_pelt is created per rq.
The increase of this clock scales with current capacity when something
is running on rq and synchronizes with clock_task when rq is idle. With
this mechanism, we ensure the same running and idle time whatever the
current capacity. This also enables to simplify the pelt algorithm by
removing all references of uarch and frequency and applying the same
contribution to utilization and loads. Furthermore, the scaling is done
only once per update of clock (update_rq_clock_task()) instead of during
each update of sched_entities and cfs/rt/dl_rq of the rq like the current
implementation. This is interesting when cgroup are involved as shown in
the results below:
On a hikey (octo Arm64 platform).
Performance cpufreq governor and only shallowest c-state to remove variance
generated by those power features so we only track the impact of pelt algo.
each test runs 16 times:
./perf bench sched pipe
(higher is better)
kernel tip/sched/core + patch
ops/seconds ops/seconds diff
cgroup
root 59652(+/- 0.18%) 59876(+/- 0.24%) +0.38%
level1 55608(+/- 0.27%) 55923(+/- 0.24%) +0.57%
level2 52115(+/- 0.29%) 52564(+/- 0.22%) +0.86%
hackbench -l 1000
(lower is better)
kernel tip/sched/core + patch
duration(sec) duration(sec) diff
cgroup
root 4.453(+/- 2.37%) 4.383(+/- 2.88%) -1.57%
level1 4.859(+/- 8.50%) 4.830(+/- 7.07%) -0.60%
level2 5.063(+/- 9.83%) 4.928(+/- 9.66%) -2.66%
Then, the responsiveness of PELT is improved when CPU is not running at max
capacity with this new algorithm. I have put below some examples of
duration to reach some typical load values according to the capacity of the
CPU with current implementation and with this patch. These values has been
computed based on the geometric series and the half period value:
Util (%) max capacity half capacity(mainline) half capacity(w/ patch)
972 (95%) 138ms not reachable 276ms
486 (47.5%) 30ms 138ms 60ms
256 (25%) 13ms 32ms 26ms
On my hikey (octo Arm64 platform) with schedutil governor, the time to
reach max OPP when starting from a null utilization, decreases from 223ms
with current scale invariance down to 121ms with the new algorithm.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten.Rasmussen@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bsegall@google.com
Cc: dietmar.eggemann@arm.com
Cc: patrick.bellasi@arm.com
Cc: pjt@google.com
Cc: pkondeti@codeaurora.org
Cc: quentin.perret@arm.com
Cc: rjw@rjwysocki.net
Cc: srinivas.pandruvada@linux.intel.com
Cc: thara.gopinath@linaro.org
Link: https://lkml.kernel.org/r/1548257214-13745-3-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
|
Yangtao Li
|
9ebc605381 |
sched/core: Remove unnecessary unlikely() in push_*_task()
WARN_ON() already contains an unlikely(), so it's not necessary to use WARN_ON(1). Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20181103172602.1917-1-tiny.windzz@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Ingo Molnar
|
dfcb245e28 |
sched: Fix various typos in comments
Go over the scheduler source code and fix common typos in comments - and a typo in an actual variable name. No change in functionality intended. Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Muchun Song
|
ff1cdc94de |
sched/core: Introduce set_next_task() helper for better code readability
When we pick the next task, we will do the following for the task:
1) p->se.exec_start = rq_clock_task(rq);
2) dequeue_pushable(_dl)_task(rq, p);
When we call set_curr_task(), we also need to do the same thing
above. In rt.c, the code at 1) is in the _pick_next_task_rt()
and the code at 2) is in the pick_next_task_rt(). If we put two
operations in one function, maybe better. So, we introduce a new
function set_next_task(), which is responsible for doing the above.
By introducing the function we can get rid of calling the
dequeue_pushable(_dl)_task() directly(We can call set_next_task())
in pick_next_task() and have better code readability and reuse.
In set_curr_task_rt(), we also can call set_next_task().
Do this things such that we end up with:
static struct task_struct *pick_next_task(struct rq *rq,
struct task_struct *prev,
struct rq_flags *rf)
{
/* do something else ... */
put_prev_task(rq, prev);
/* pick next task p */
set_next_task(rq, p);
/* do something else ... */
}
put_prev_task() can match set_next_task(), which can make the
code more readable.
Signed-off-by: Muchun Song <smuchun@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181026131743.21786-1-smuchun@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
|
Srikar Dronamraju
|
1327237a59 |
sched/numa: Pass destination CPU as a parameter to migrate_task_rq
This additional parameter (new_cpu) is used later for identifying if task migration is across nodes. No functional change. Specjbb2005 results (8 warehouses) Higher bops are better 2 Socket - 2 Node Haswell - X86 JVMS Prev Current %Change 4 203353 200668 -1.32036 1 328205 321791 -1.95427 2 Socket - 4 Node Power8 - PowerNV JVMS Prev Current %Change 1 214384 204848 -4.44809 2 Socket - 2 Node Power9 - PowerNV JVMS Prev Current %Change 4 188553 188098 -0.241311 1 196273 200351 2.07772 4 Socket - 4 Node Power7 - PowerVM JVMS Prev Current %Change 8 57581.2 58145.9 0.980702 1 103468 103798 0.318939 Brings out the variance between different specjbb2005 runs. Some events stats before and after applying the patch. perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86 Event Before After cs 13,941,377 13,912,183 migrations 1,157,323 1,155,931 faults 382,175 367,139 cache-misses 54,993,823,500 54,240,196,814 sched:sched_move_numa 2,005 1,571 sched:sched_stick_numa 14 9 sched:sched_swap_numa 529 463 migrate:mm_migrate_pages 1,573 703 vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86 Event Before After numa_hint_faults 67099 50155 numa_hint_faults_local 58456 45264 numa_hit 240416 239652 numa_huge_pte_updates 18 36 numa_interleave 65 68 numa_local 240339 239576 numa_other 77 76 numa_pages_migrated 1574 680 numa_pte_updates 77182 71146 perf stats 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86 Event Before After cs 3,176,453 3,156,720 migrations 30,238 30,354 faults 87,869 97,261 cache-misses 12,544,479,391 12,400,026,826 sched:sched_move_numa 23 4 sched:sched_stick_numa 0 0 sched:sched_swap_numa 6 1 migrate:mm_migrate_pages 10 20 vmstat 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86 Event Before After numa_hint_faults 236 272 numa_hint_faults_local 201 186 numa_hit 72293 71362 numa_huge_pte_updates 0 0 numa_interleave 26 23 numa_local 72233 71299 numa_other 60 63 numa_pages_migrated 8 2 numa_pte_updates 0 0 perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After cs 8,478,820 8,606,824 migrations 171,323 155,352 faults 307,499 301,409 cache-misses 240,353,599 157,759,224 sched:sched_move_numa 214 168 sched:sched_stick_numa 0 0 sched:sched_swap_numa 4 3 migrate:mm_migrate_pages 89 125 vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After numa_hint_faults 5301 4650 numa_hint_faults_local 4745 3946 numa_hit 92943 90489 numa_huge_pte_updates 0 0 numa_interleave 899 892 numa_local 92345 90034 numa_other 598 455 numa_pages_migrated 88 124 numa_pte_updates 5505 4818 perf stats 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After cs 2,066,172 2,113,167 migrations 11,076 10,533 faults 149,544 142,727 cache-misses 10,398,067 5,594,192 sched:sched_move_numa 43 10 sched:sched_stick_numa 0 0 sched:sched_swap_numa 0 0 migrate:mm_migrate_pages 6 6 vmstat 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After numa_hint_faults 3552 744 numa_hint_faults_local 3347 584 numa_hit 25611 25551 numa_huge_pte_updates 0 0 numa_interleave 213 263 numa_local 25583 25302 numa_other 28 249 numa_pages_migrated 6 6 numa_pte_updates 3535 744 perf stats 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After cs 99,358,136 101,227,352 migrations 4,041,607 4,151,829 faults 749,653 745,233 cache-misses 225,562,543,251 224,669,561,766 sched:sched_move_numa 771 617 sched:sched_stick_numa 14 2 sched:sched_swap_numa 204 187 migrate:mm_migrate_pages 1,180 316 vmstat 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After numa_hint_faults 27409 24195 numa_hint_faults_local 20677 21639 numa_hit 239988 238331 numa_huge_pte_updates 0 0 numa_interleave 0 0 numa_local 239983 238331 numa_other 5 0 numa_pages_migrated 1016 204 numa_pte_updates 27916 24561 perf stats 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After cs 60,899,307 62,738,978 migrations 544,668 562,702 faults 270,834 228,465 cache-misses 74,543,455,635 75,778,067,952 sched:sched_move_numa 735 648 sched:sched_stick_numa 25 13 sched:sched_swap_numa 174 137 migrate:mm_migrate_pages 816 733 vmstat 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After numa_hint_faults 11059 10281 numa_hint_faults_local 4733 3242 numa_hit 41384 36338 numa_huge_pte_updates 0 0 numa_interleave 0 0 numa_local 41383 36338 numa_other 1 0 numa_pages_migrated 815 706 numa_pte_updates 11323 10176 Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Jirka Hladky <jhladky@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1537552141-27815-3-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Ingo Molnar
|
4765096f4f |
Merge branch 'sched/urgent' into sched/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Daniel Bristot de Oliveira
|
840d719604 |
sched/deadline: Update rq_clock of later_rq when pushing a task
Daniel Casini got this warn while running a DL task here at RetisLab:
[ 461.137582] ------------[ cut here ]------------
[ 461.137583] rq->clock_update_flags < RQCF_ACT_SKIP
[ 461.137599] WARNING: CPU: 4 PID: 2354 at kernel/sched/sched.h:967 assert_clock_updated.isra.32.part.33+0x17/0x20
[a ton of modules]
[ 461.137646] CPU: 4 PID: 2354 Comm: label_image Not tainted 4.18.0-rc4+ #3
[ 461.137647] Hardware name: ASUS All Series/Z87-K, BIOS 0801 09/02/2013
[ 461.137649] RIP: 0010:assert_clock_updated.isra.32.part.33+0x17/0x20
[ 461.137649] Code: ff 48 89 83 08 09 00 00 eb c6 66 0f 1f 84 00 00 00 00 00 55 48 c7 c7 98 7a 6c a5 c6 05 bc 0d 54 01 01 48 89 e5 e8 a9 84 fb ff <0f> 0b 5d c3 0f 1f 44 00 00 0f 1f 44 00 00 83 7e 60 01 74 0a 48 3b
[ 461.137673] RSP: 0018:ffffa77e08cafc68 EFLAGS: 00010082
[ 461.137674] RAX: 0000000000000000 RBX: ffff8b3fc1702d80 RCX: 0000000000000006
[ 461.137674] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff8b3fded164b0
[ 461.137675] RBP: ffffa77e08cafc68 R08: 0000000000000026 R09: 0000000000000339
[ 461.137676] R10: ffff8b3fd060d410 R11: 0000000000000026 R12: ffffffffa4e14e20
[ 461.137677] R13: ffff8b3fdec22940 R14: ffff8b3fc1702da0 R15: ffff8b3fdec22940
[ 461.137678] FS: 00007efe43ee5700(0000) GS:ffff8b3fded00000(0000) knlGS:0000000000000000
[ 461.137679] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 461.137680] CR2: 00007efe30000010 CR3: 0000000301744003 CR4: 00000000001606e0
[ 461.137680] Call Trace:
[ 461.137684] push_dl_task.part.46+0x3bc/0x460
[ 461.137686] task_woken_dl+0x60/0x80
[ 461.137689] ttwu_do_wakeup+0x4f/0x150
[ 461.137690] ttwu_do_activate+0x77/0x80
[ 461.137692] try_to_wake_up+0x1d6/0x4c0
[ 461.137693] wake_up_q+0x32/0x70
[ 461.137696] do_futex+0x7e7/0xb50
[ 461.137698] __x64_sys_futex+0x8b/0x180
[ 461.137701] do_syscall_64+0x5a/0x110
[ 461.137703] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 461.137705] RIP: 0033:0x7efe4918ca26
[ 461.137705] Code: 00 00 00 74 17 49 8b 48 20 44 8b 59 10 41 83 e3 30 41 83 fb 20 74 1e be 85 00 00 00 41 ba 01 00 00 00 41 b9 01 00 00 04 0f 05 <48> 3d 01 f0 ff ff 73 1f 31 c0 c3 be 8c 00 00 00 49 89 c8 4d 31 d2
[ 461.137738] RSP: 002b:00007efe43ee4928 EFLAGS: 00000283 ORIG_RAX: 00000000000000ca
[ 461.137739] RAX: ffffffffffffffda RBX: 0000000005094df0 RCX: 00007efe4918ca26
[ 461.137740] RDX: 0000000000000001 RSI: 0000000000000085 RDI: 0000000005094e24
[ 461.137741] RBP: 00007efe43ee49c0 R08: 0000000005094e20 R09: 0000000004000001
[ 461.137741] R10: 0000000000000001 R11: 0000000000000283 R12: 0000000000000000
[ 461.137742] R13: 0000000005094df8 R14: 0000000000000001 R15: 0000000000448a10
[ 461.137743] ---[ end trace 187df4cad2bf7649 ]---
This warning happened in the push_dl_task(), because
__add_running_bw()->cpufreq_update_util() is getting the rq_clock of
the later_rq before its update, which takes place at activate_task().
The fix then is to update the rq_clock before calling add_running_bw().
To avoid double rq_clock_update() call, we set ENQUEUE_NOCLOCK flag to
activate_task().
Reported-by: Daniel Casini <daniel.casini@santannapisa.it>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@santannapisa.it>
Fixes:
|
|
|
Vincent Guittot
|
523e979d31 |
sched/core: Use PELT for scale_rt_capacity()
The utilization of the CPU by RT, DL and IRQs are now tracked with PELT so we can use these metrics instead of rt_avg to evaluate the remaining capacity available for CFS class. scale_rt_capacity() behavior has been changed and now returns the remaining capacity available for CFS instead of a scaling factor because RT, DL and IRQ provide now absolute utilization value. The same formula as schedutil is used: IRQ util_avg + (1 - IRQ util_avg / max capacity ) * /Sum rq util_avg but the implementation is different because it doesn't return the same value and doesn't benefit of the same optimization. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1530200714-4504-10-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Vincent Guittot
|
3727e0e163 |
sched/dl: Add dl_rq utilization tracking
Similarly to what happens with RT tasks, CFS tasks can be preempted by DL tasks and the CFS's utilization might no longer describes the real utilization level. Current DL bandwidth reflects the requirements to meet deadline when tasks are enqueued but not the current utilization of the DL sched class. We track DL class utilization to estimate the system utilization. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1530200714-4504-5-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Juri Lelli
|
e117cb52bd |
sched/deadline: Fix switched_from_dl() warning
Mark noticed that syzkaller is able to reliably trigger the following warning: dl_rq->running_bw > dl_rq->this_bw WARNING: CPU: 1 PID: 153 at kernel/sched/deadline.c:124 switched_from_dl+0x454/0x608 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 153 Comm: syz-executor253 Not tainted 4.18.0-rc3+ #29 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x458 show_stack+0x20/0x30 dump_stack+0x180/0x250 panic+0x2dc/0x4ec __warn_printk+0x0/0x150 report_bug+0x228/0x2d8 bug_handler+0xa0/0x1a0 brk_handler+0x2f0/0x568 do_debug_exception+0x1bc/0x5d0 el1_dbg+0x18/0x78 switched_from_dl+0x454/0x608 __sched_setscheduler+0x8cc/0x2018 sys_sched_setattr+0x340/0x758 el0_svc_naked+0x30/0x34 syzkaller reproducer runs a bunch of threads that constantly switch between DEADLINE and NORMAL classes while interacting through futexes. The splat above is caused by the fact that if a DEADLINE task is setattr back to NORMAL while in non_contending state (blocked on a futex - inactive timer armed), its contribution to running_bw is not removed before sub_rq_bw() gets called (!task_on_rq_queued() branch) and the latter sees running_bw > this_bw. Fix it by removing a task contribution from running_bw if the task is not queued and in non_contending state while switched to a different class. Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Reviewed-by: Luca Abeni <luca.abeni@santannapisa.it> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/20180711072948.27061-1-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Juri Lelli
|
ecda2b66e2 |
sched/deadline: Fix missing clock update
A missing clock update is causing the following warning: rq->clock_update_flags < RQCF_ACT_SKIP WARNING: CPU: 10 PID: 0 at kernel/sched/sched.h:963 inactive_task_timer+0x5d6/0x720 Call Trace: <IRQ> __hrtimer_run_queues+0x10f/0x530 hrtimer_interrupt+0xe5/0x240 smp_apic_timer_interrupt+0x79/0x2b0 apic_timer_interrupt+0xf/0x20 </IRQ> do_idle+0x203/0x280 cpu_startup_entry+0x6f/0x80 start_secondary+0x1b0/0x200 secondary_startup_64+0xa5/0xb0 hardirqs last enabled at (793919): [<ffffffffa27c5f6e>] cpuidle_enter_state+0x9e/0x360 hardirqs last disabled at (793920): [<ffffffffa2a0096e>] interrupt_entry+0xce/0xe0 softirqs last enabled at (793922): [<ffffffffa20bef78>] irq_enter+0x68/0x70 softirqs last disabled at (793921): [<ffffffffa20bef5d>] irq_enter+0x4d/0x70 This happens because inactive_task_timer() calls sub_running_bw() (if TASK_DEAD and non_contending) that might trigger a schedutil update, which might access the clock. Clock is however currently updated only later in inactive_task_timer() function. Fix the problem by updating the clock right after task_rq_lock(). Reported-by: kernel test robot <xiaolong.ye@intel.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Claudio Scordino <claudio@evidence.eu.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luca Abeni <luca.abeni@santannapisa.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180530160809.9074-1-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Mathieu Malaterre
|
3febfc8a21 |
sched/deadline: Make the grub_reclaim() function static
Since the grub_reclaim() function can be made static, make it so. Silences the following GCC warning (W=1): kernel/sched/deadline.c:1120:5: warning: no previous prototype for ‘grub_reclaim’ [-Wmissing-prototypes] Signed-off-by: Mathieu Malaterre <malat@debian.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180516200902.959-1-malat@debian.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Mathieu Malaterre
|
f6a3463063 |
sched/debug: Move the print_rt_rq() and print_dl_rq() declarations to kernel/sched/sched.h
In the following commit:
|
|
|
Davidlohr Bueso
|
adcc8da885 |
sched/core: Simplify helpers for rq clock update skip requests
By renaming the functions we can get rid of the skip parameter and have better code redability. It makes zero sense to have things such as: rq_clock_skip_update(rq, false) When the skip request is in fact not going to happen. Ever. Rename things such that we end up with: rq_clock_skip_update(rq) rq_clock_cancel_skipupdate(rq) Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Cc: matt@codeblueprint.co.uk Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/20180404161539.nhadkff2aats74jh@linux-n805 Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Peter Zijlstra
|
4042d003a0 |
cpufreq/schedutil: Remove unused CPUFREQ_DL
Bitrot... Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Ingo Molnar
|
02d8ec9456 |
sched/deadline, rt: Rename queue_push_tasks/queue_pull_task to create separate namespace
There are similarly named functions in both of these modules: kernel/sched/deadline.c:static inline void queue_push_tasks(struct rq *rq) kernel/sched/deadline.c:static inline void queue_pull_task(struct rq *rq) kernel/sched/deadline.c:static inline void queue_push_tasks(struct rq *rq) kernel/sched/deadline.c:static inline void queue_pull_task(struct rq *rq) kernel/sched/deadline.c: queue_push_tasks(rq); kernel/sched/deadline.c: queue_pull_task(rq); kernel/sched/deadline.c: queue_push_tasks(rq); kernel/sched/deadline.c: queue_pull_task(rq); kernel/sched/rt.c:static inline void queue_push_tasks(struct rq *rq) kernel/sched/rt.c:static inline void queue_pull_task(struct rq *rq) kernel/sched/rt.c:static inline void queue_push_tasks(struct rq *rq) kernel/sched/rt.c: queue_push_tasks(rq); kernel/sched/rt.c: queue_pull_task(rq); kernel/sched/rt.c: queue_push_tasks(rq); kernel/sched/rt.c: queue_pull_task(rq); ... which makes it harder to grep for them. Prefix them with deadline_ and rt_, respectively. Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Ingo Molnar
|
325ea10c08 |
sched/headers: Simplify and clean up header usage in the scheduler
Do the following cleanups and simplifications: - sched/sched.h already includes <asm/paravirt.h>, so no need to include it in sched/core.c again. - order the <linux/sched/*.h> headers alphabetically - add all <linux/sched/*.h> headers to kernel/sched/sched.h - remove all unnecessary includes from the .c files that are already included in kernel/sched/sched.h. Finally, make all scheduler .c files use a single common header: #include "sched.h" ... which now contains a union of the relied upon headers. This makes the various .c files easier to read and easier to handle. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Ingo Molnar
|
97fb7a0a89 |
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
|
Frederic Weisbecker
|
d84b31313e |
sched/isolation: Offload residual 1Hz scheduler tick
When a CPU runs in full dynticks mode, a 1Hz tick remains in order to keep the scheduler stats alive. However this residual tick is a burden for bare metal tasks that can't stand any interruption at all, or want to minimize them. The usual boot parameters "nohz_full=" or "isolcpus=nohz" will now outsource these scheduler ticks to the global workqueue so that a housekeeping CPU handles those remotely. The sched_class::task_tick() implementations have been audited and look safe to be called remotely as the target runqueue and its current task are passed in parameter and don't seem to be accessed locally. Note that in the case of using isolcpus, it's still up to the user to affine the global workqueues to the housekeeping CPUs through /sys/devices/virtual/workqueue/cpumask or domains isolation "isolcpus=nohz,domain". Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Christoph Lameter <cl@linux.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Link: http://lkml.kernel.org/r/1519186649-3242-6-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Wen Yang
|
6fe0ce1eb0 |
sched/deadline: Make update_curr_dl() more accurate
rq->clock_task may be updated between the two calls of rq_clock_task() in update_curr_dl(). Calling rq_clock_task() only once makes it more accurate and efficient, taking update_curr() as reference. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: zhong.weidong@zte.com.cn Link: http://lkml.kernel.org/r/1517882148-44599-1-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Juri Lelli
|
07881166a8 |
sched/deadline: Make bandwidth enforcement scale-invariant
Apply frequency and CPU scale-invariance correction factor to bandwidth enforcement (similar to what we already do to fair utilization tracking). Each delta_exec gets scaled considering current frequency and maximum CPU capacity; which means that the reservation runtime parameter (that need to be specified profiling the task execution at max frequency on biggest capacity core) gets thus scaled accordingly. Signed-off-by: Juri Lelli <juri.lelli@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Claudio Scordino <claudio@evidence.eu.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luca Abeni <luca.abeni@santannapisa.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: alessio.balsini@arm.com Cc: bristot@redhat.com Cc: dietmar.eggemann@arm.com Cc: joelaf@google.com Cc: juri.lelli@redhat.com Cc: mathieu.poirier@linaro.org Cc: morten.rasmussen@arm.com Cc: patrick.bellasi@arm.com Cc: rjw@rjwysocki.net Cc: rostedt@goodmis.org Cc: tkjos@android.com Cc: tommaso.cucinotta@santannapisa.it Cc: vincent.guittot@linaro.org Link: http://lkml.kernel.org/r/20171204102325.5110-9-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Juri Lelli
|
794a56ebd9 |
sched/cpufreq: Change the worker kthread to SCHED_DEADLINE
Worker kthread needs to be able to change frequency for all other threads. Make it special, just under STOP class. Signed-off-by: Juri Lelli <juri.lelli@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Claudio Scordino <claudio@evidence.eu.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luca Abeni <luca.abeni@santannapisa.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: alessio.balsini@arm.com Cc: bristot@redhat.com Cc: dietmar.eggemann@arm.com Cc: joelaf@google.com Cc: juri.lelli@redhat.com Cc: mathieu.poirier@linaro.org Cc: morten.rasmussen@arm.com Cc: patrick.bellasi@arm.com Cc: rjw@rjwysocki.net Cc: rostedt@goodmis.org Cc: tkjos@android.com Cc: tommaso.cucinotta@santannapisa.it Cc: vincent.guittot@linaro.org Link: http://lkml.kernel.org/r/20171204102325.5110-4-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Juri Lelli
|
e0367b1267 |
sched/deadline: Move CPU frequency selection triggering points
Since SCHED_DEADLINE doesn't track utilization signal (but reserves a fraction of CPU bandwidth to tasks admitted to the system), there is no point in evaluating frequency changes during each tick event. Move frequency selection triggering points to where running_bw changes. Co-authored-by: Claudio Scordino <claudio@evidence.eu.com> Signed-off-by: Juri Lelli <juri.lelli@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luca Abeni <luca.abeni@santannapisa.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: alessio.balsini@arm.com Cc: bristot@redhat.com Cc: dietmar.eggemann@arm.com Cc: joelaf@google.com Cc: juri.lelli@redhat.com Cc: mathieu.poirier@linaro.org Cc: morten.rasmussen@arm.com Cc: patrick.bellasi@arm.com Cc: rjw@rjwysocki.net Cc: rostedt@goodmis.org Cc: tkjos@android.com Cc: tommaso.cucinotta@santannapisa.it Cc: vincent.guittot@linaro.org Link: http://lkml.kernel.org/r/20171204102325.5110-3-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Juri Lelli
|
34be39305a |
sched/deadline: Implement "runtime overrun signal" support
This patch adds the possibility of getting the delivery of a SIGXCPU signal whenever there is a runtime overrun. The request is done through the sched_flags field within the sched_attr structure. Forward port of https://lkml.org/lkml/2009/10/16/170 Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Claudio Scordino <claudio@evidence.eu.com> Signed-off-by: Luca Abeni <luca.abeni@santannapisa.it> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it> Link: http://lkml.kernel.org/r/1513077024-25461-1-git-send-email-claudio@evidence.eu.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Linus Torvalds
|
22714a2ba4 |
Merge branch 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"Cgroup2 cpu controller support is finally merged.
- Basic cpu statistics support to allow monitoring by default without
the CPU controller enabled.
- cgroup2 cpu controller support.
- /sys/kernel/cgroup files to help dealing with new / optional
features"
* 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: export list of cgroups v2 features using sysfs
cgroup: export list of delegatable control files using sysfs
cgroup: mark @cgrp __maybe_unused in cpu_stat_show()
MAINTAINERS: relocate cpuset.c
cgroup, sched: Move basic cpu stats from cgroup.stat to cpu.stat
sched: Implement interface for cgroup unified hierarchy
sched: Misc preps for cgroup unified hierarchy interface
sched/cputime: Add dummy cputime_adjust() implementation for CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
cgroup: statically initialize init_css_set->dfl_cgrp
cgroup: Implement cgroup2 basic CPU usage accounting
cpuacct: Introduce cgroup_account_cputime[_field]()
sched/cputime: Expose cputime_adjust()
|
|
|
Ingo Molnar
|
8a103df440 |
Merge branch 'linus' into sched/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Greg Kroah-Hartman
|
b24413180f |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Peter Zijlstra
|
8c0944cee7 |
sched/deadline: Rename __dl_clear() to __dl_sub()
__dl_sub() is more meaningful as a name, and is more consistent with the naming of the dual function (__dl_add()). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Luca Abeni <luca.abeni@santannapisa.it> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Juri Lelli <juri.lelli@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1504778971-13573-4-git-send-email-luca.abeni@santannapisa.it Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Luca Abeni
|
295d6d5e37 |
sched/deadline: Fix switching to -deadline
Fix a bug introduced in:
|
|
|
Tejun Heo
|
d2cc5ed694 |
cpuacct: Introduce cgroup_account_cputime[_field]()
Introduce cgroup_account_cputime[_field]() which wrap cpuacct_charge() and cgroup_account_field(). This doesn't introduce any functional changes and will be used to add cgroup basic resource accounting. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> |
|
|
Davidlohr Bueso
|
2161573ecd |
sched/deadline: replace earliest dl and rq leftmost caching
... with the generic rbtree flavor instead. No changes in semantics whatsoever. Link: http://lkml.kernel.org/r/20170719014603.19029-9-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Linus Torvalds
|
439644096c |
Power management updates for v4.14-rc1
- Drop the P-state selection algorithm based on a PID controller
from intel_pstate and make it use the same P-state selection
method (based on the CPU load) for all types of systems in the
active mode (Rafael Wysocki, Srinivas Pandruvada).
- Rework the cpufreq core and governors to make it possible to
take cross-CPU utilization updates into account and modify the
schedutil governor to actually do so (Viresh Kumar).
- Clean up the handling of transition latency information in the
cpufreq core and untangle it from the information on which drivers
cannot do dynamic frequency switching (Viresh Kumar).
- Add support for new SoCs (MT2701/MT7623 and MT7622) to the
mediatek cpufreq driver and update its DT bindings (Sean Wang).
- Modify the cpufreq dt-platdev driver to autimatically create
cpufreq devices for the new (v2) Operating Performance Points
(OPP) DT bindings and update its whitelist of supported systems
(Viresh Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen,
Finley Xiao).
- Add support for Ux500 to the cpufreq-dt driver and drop the
obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann).
- Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem
Nguyen).
- Fix and clean up assorted issues in the cpufreq drivers and core
(Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva,
Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla).
- Update the IO-wait boost handling in the schedutil governor to
make it less aggressive (Joel Fernandes).
- Rework system suspend diagnostics to make it print fewer messages
to the kernel log by default, add a sysfs knob to allow more
suspend-related messages to be printed and add Low Power S0 Idle
constraints checks to the ACPI suspend-to-idle code (Rafael
Wysocki, Srinivas Pandruvada).
- Prefer suspend-to-idle over S3 on ACPI-based systems with the
ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM
interface present in the ACPI tables (Rafael Wysocki).
- Update documentation related to system sleep and rename a number
of items in the code to make it cleare that they are related to
suspend-to-idle (Rafael Wysocki).
- Export a variable allowing device drivers to check the target
system sleep state from the core system suspend code (Florian
Fainelli).
- Clean up the cpuidle subsystem to handle the polling state on
x86 in a more straightforward way and to use %pOF instead of
full_name (Rafael Wysocki, Rob Herring).
- Update the devfreq framework to fix and clean up a few minor
issues (Chanwoo Choi, Rob Herring).
- Extend diagnostics in the generic power domains (genpd) framework
and clean it up slightly (Thara Gopinath, Rob Herring).
- Fix and clean up a couple of issues in the operating performance
points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz).
- Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling
(AVS) driver (David Wu).
- Fix the usage of notifiers in CPU power management on some
platforms (Alex Shi).
- Update the pm-graph system suspend/hibernation and boot profiling
utility (Todd Brandt).
- Make it possible to run the cpupower utility without CPU0 (Prarit
Bhargava).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=mAiV
-----END PGP SIGNATURE-----
Merge tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"This time (again) cpufreq gets the majority of changes which mostly
are driver updates (including a major consolidation of intel_pstate),
some schedutil governor modifications and core cleanups.
There also are some changes in the system suspend area, mostly related
to diagnostics and debug messages plus some renames of things related
to suspend-to-idle. One major change here is that suspend-to-idle is
now going to be preferred over S3 on systems where the ACPI tables
indicate to do so and provide requsite support (the Low Power Idle S0
_DSM in particular). The system sleep documentation and the tools
related to it are updated too.
The rest is a few cpuidle changes (nothing major), devfreq updates,
generic power domains (genpd) framework updates and a few assorted
modifications elsewhere.
Specifics:
- Drop the P-state selection algorithm based on a PID controller from
intel_pstate and make it use the same P-state selection method
(based on the CPU load) for all types of systems in the active mode
(Rafael Wysocki, Srinivas Pandruvada).
- Rework the cpufreq core and governors to make it possible to take
cross-CPU utilization updates into account and modify the schedutil
governor to actually do so (Viresh Kumar).
- Clean up the handling of transition latency information in the
cpufreq core and untangle it from the information on which drivers
cannot do dynamic frequency switching (Viresh Kumar).
- Add support for new SoCs (MT2701/MT7623 and MT7622) to the mediatek
cpufreq driver and update its DT bindings (Sean Wang).
- Modify the cpufreq dt-platdev driver to autimatically create
cpufreq devices for the new (v2) Operating Performance Points (OPP)
DT bindings and update its whitelist of supported systems (Viresh
Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen, Finley
Xiao).
- Add support for Ux500 to the cpufreq-dt driver and drop the
obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann).
- Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem
Nguyen).
- Fix and clean up assorted issues in the cpufreq drivers and core
(Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva,
Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla).
- Update the IO-wait boost handling in the schedutil governor to make
it less aggressive (Joel Fernandes).
- Rework system suspend diagnostics to make it print fewer messages
to the kernel log by default, add a sysfs knob to allow more
suspend-related messages to be printed and add Low Power S0 Idle
constraints checks to the ACPI suspend-to-idle code (Rafael
Wysocki, Srinivas Pandruvada).
- Prefer suspend-to-idle over S3 on ACPI-based systems with the
ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM
interface present in the ACPI tables (Rafael Wysocki).
- Update documentation related to system sleep and rename a number of
items in the code to make it cleare that they are related to
suspend-to-idle (Rafael Wysocki).
- Export a variable allowing device drivers to check the target
system sleep state from the core system suspend code (Florian
Fainelli).
- Clean up the cpuidle subsystem to handle the polling state on x86
in a more straightforward way and to use %pOF instead of full_name
(Rafael Wysocki, Rob Herring).
- Update the devfreq framework to fix and clean up a few minor issues
(Chanwoo Choi, Rob Herring).
- Extend diagnostics in the generic power domains (genpd) framework
and clean it up slightly (Thara Gopinath, Rob Herring).
- Fix and clean up a couple of issues in the operating performance
points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz).
- Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling
(AVS) driver (David Wu).
- Fix the usage of notifiers in CPU power management on some
platforms (Alex Shi).
- Update the pm-graph system suspend/hibernation and boot profiling
utility (Todd Brandt).
- Make it possible to run the cpupower utility without CPU0 (Prarit
Bhargava)"
* tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (87 commits)
cpuidle: Make drivers initialize polling state
cpuidle: Move polling state initialization code to separate file
cpuidle: Eliminate the CPUIDLE_DRIVER_STATE_START symbol
cpufreq: imx6q: Fix imx6sx low frequency support
cpufreq: speedstep-lib: make several arrays static, makes code smaller
PM: docs: Delete the obsolete states.txt document
PM: docs: Describe high-level PM strategies and sleep states
PM / devfreq: Fix memory leak when fail to register device
PM / devfreq: Add dependency on PM_OPP
PM / devfreq: Move private devfreq_update_stats() into devfreq
PM / devfreq: Convert to using %pOF instead of full_name
PM / AVS: rockchip-io: add io selectors and supplies for RV1108
cpufreq: ti: Fix 'of_node_put' being called twice in error handling path
cpufreq: dt-platdev: Drop few entries from whitelist
cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2
ARM: ux500: don't select CPUFREQ_DT
cpuidle: Convert to using %pOF instead of full_name
cpufreq: Convert to using %pOF instead of full_name
PM / Domains: Convert to using %pOF instead of full_name
cpufreq: Cap the default transition delay value to 10 ms
...
|
|
|
Byungchul Park
|
3261ed0b25 |
sched/deadline: Change return value of cpudl_find()
cpudl_find() users are only interested in knowing if suitable CPU(s) were found or not (and then they look at later_mask to know which). Change cpudl_find() return type accordingly. Aligns with rt code. Signed-off-by: Byungchul Park <byungchul.park@lge.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <bristot@redhat.com> Cc: <juri.lelli@gmail.com> Cc: <kernel-team@lge.com> Cc: <rostedt@goodmis.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1495504859-10960-3-git-send-email-byungchul.park@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |