Export bio_release_pages and bio_iov_iter_get_pages, so they can be used
from modular code.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Modify the interface of blk_revalidate_disk_zones() to add an optional
driver callback function that a driver can use to extend processing
done during zone revalidation. The callback, if defined, is executed
with the device request queue frozen, after all zones have been
inspected.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce blk_req_zone_write_trylock(), which either grabs the write-lock
for a sequential zone or returns false, if the zone is already locked.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Define REQ_OP_ZONE_APPEND to append-write sectors to a zone of a zoned
block device. This is a no-merge write operation.
A zone append write BIO must:
* Target a zoned block device
* Have a sector position indicating the start sector of the target zone
* The target zone must be a sequential write zone
* The BIO must not cross a zone boundary
* The BIO size must not be split to ensure that a single range of LBAs
is written with a single command.
Implement these checks in generic_make_request_checks() using the
helper function blk_check_zone_append(). To avoid write append BIO
splitting, introduce the new max_zone_append_sectors queue limit
attribute and ensure that a BIO size is always lower than this limit.
Export this new limit through sysfs and check these limits in bio_full().
Also when a LLDD can't dispatch a request to a specific zone, it
will return BLK_STS_ZONE_RESOURCE indicating this request needs to
be delayed, e.g. because the zone it will be dispatched to is still
write-locked. If this happens set the request aside in a local list
to continue trying dispatching requests such as READ requests or a
WRITE/ZONE_APPEND requests targetting other zones. This way we can
still keep a high queue depth without starving other requests even if
one request can't be served due to zone write-locking.
Finally, make sure that the bio sector position indicates the actual
write position as indicated by the device on completion.
Signed-off-by: Keith Busch <kbusch@kernel.org>
[ jth: added zone-append specific add_page and merge_page helpers ]
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rename __bio_add_pc_page() to bio_add_hw_page() and explicitly pass in a
max_sectors argument.
This max_sectors argument can be used to specify constraints from the
hardware.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[ jth: rebased and made public for blk-map.c ]
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
gendisk can't be gone when there is IO activity, so not hold
part0's refcount in IO path.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Cc: Yufen Yu <yuyufen@huawei.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The seqcount of 'nr_sects_seq' is only needed in case of 32bit SMP,
so define it just for 32bit SMP.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Cc: Yufen Yu <yuyufen@huawei.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
delete_partition() clears the cached last_lookup partition. However the
.last_lookup cache may be overwritten by one IO path after it is cleared
from delete_partition(). Then another IO path may use the cached deleting
partition after hd_struct_free() is called, then use-after-free is triggered
on the cached partition.
Fixes the issue by the following approach:
1) always get the partition's refcount via hd_struct_try_get() before
setting .last_lookup
2) move clearing .last_lookup from delete_partition() to hd_struct_free()
which is the release handle of the partition's percpu-refcount, so that no
IO path can cache deleteing partition via .last_lookup.
It is one candidate approach of Yufen's patch[1] which adds overhead
in fast path by indirect lookup which may introduce one extra cacheline
in IO path. Also this patch relies on percpu-refcount's protection, and
it is easier to understand and verify.
[1] https://lore.kernel.org/linux-block/20200109013551.GB9655@ming.t460p/T/#t
Reported-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we increase hardware queue count, blk_mq_update_queue_map will
reset the mapping between cpu and hardware queue base on the hardware
queue count(set->nr_hw_queues). The mapping cannot be reset if it
encounters error in blk_mq_realloc_hw_ctxs, but the fallback flow will
continue using it, then blk_mq_map_swqueue will touch a invalid memory,
because the mapping points to a wrong hctx.
blktest block/030:
null_blk: module loaded
Increasing nr_hw_queues to 8 fails, fallback to 1
==================================================================
BUG: KASAN: null-ptr-deref in blk_mq_map_swqueue+0x2f2/0x830
Read of size 8 at addr 0000000000000128 by task nproc/8541
CPU: 5 PID: 8541 Comm: nproc Not tainted 5.7.0-rc4-dbg+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014
Call Trace:
dump_stack+0xa5/0xe6
__kasan_report.cold+0x65/0xbb
kasan_report+0x45/0x60
check_memory_region+0x15e/0x1c0
__kasan_check_read+0x15/0x20
blk_mq_map_swqueue+0x2f2/0x830
__blk_mq_update_nr_hw_queues+0x3df/0x690
blk_mq_update_nr_hw_queues+0x32/0x50
nullb_device_submit_queues_store+0xde/0x160 [null_blk]
configfs_write_file+0x1c4/0x250 [configfs]
__vfs_write+0x4c/0x90
vfs_write+0x14b/0x2d0
ksys_write+0xdd/0x180
__x64_sys_write+0x47/0x50
do_syscall_64+0x6f/0x310
entry_SYSCALL_64_after_hwframe+0x49/0xb3
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Tested-by: Bart van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The name is only printed for a not registered bdi in writeback. Use the
device name there as is more useful anyway for the unlike case that the
warning triggers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge the _node vs normal version and drop the superflous gfp_t argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split out a new bdi_set_owner helper to set the owner, and move the policy
for creating the bdi name back into genhd.c, where it belongs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
rename blk_mq_alloc_rq_maps to blk_mq_alloc_map_and_requests,
this function allocs both map and request, make function name align
with funtion.
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
rename __blk_mq_alloc_rq_map to __blk_mq_alloc_map_and_request,
actually it alloc both map and request, make function name
align with function.
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_realloc_tag_set_tags will update set->nr_hw_queues, so
save old set->nr_hw_queues before call this function.
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull in block-5.7 fixes for 5.8. Mostly to resolve a conflict with
the blk-iocost changes, but we also need the base of the bdi
use-after-free as well as we build on top of it.
* block-5.7:
nvme: fix possible hang when ns scanning fails during error recovery
nvme-pci: fix "slimmer CQ head update"
bdi: add a ->dev_name field to struct backing_dev_info
bdi: use bdi_dev_name() to get device name
bdi: move bdi_dev_name out of line
vboxsf: don't use the source name in the bdi name
iocost: protect iocg->abs_vdebt with iocg->waitq.lock
block: remove the bd_openers checks in blk_drop_partitions
nvme: prevent double free in nvme_alloc_ns() error handling
null_blk: Cleanup zoned device initialization
null_blk: Fix zoned command handling
block: remove unused header
blk-iocost: Fix error on iocost_ioc_vrate_adj
bdev: Reduce time holding bd_mutex in sync in blkdev_close()
buffer: remove useless comment and WB_REASON_FREE_MORE_MEM, reason.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the common interface bdi_dev_name() to get device name.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Add missing <linux/backing-dev.h> include BFQ
Signed-off-by: Jens Axboe <axboe@kernel.dk>
abs_vdebt is an atomic_64 which tracks how much over budget a given cgroup
is and controls the activation of use_delay mechanism. Once a cgroup goes
over budget from forced IOs, it has to pay it back with its future budget.
The progress guarantee on debt paying comes from the iocg being active -
active iocgs are processed by the periodic timer, which ensures that as time
passes the debts dissipate and the iocg returns to normal operation.
However, both iocg activation and vdebt handling are asynchronous and a
sequence like the following may happen.
1. The iocg is in the process of being deactivated by the periodic timer.
2. A bio enters ioc_rqos_throttle(), calls iocg_activate() which returns
without anything because it still sees that the iocg is already active.
3. The iocg is deactivated.
4. The bio from #2 is over budget but needs to be forced. It increases
abs_vdebt and goes over the threshold and enables use_delay.
5. IO control is enabled for the iocg's subtree and now IOs are attributed
to the descendant cgroups and the iocg itself no longer issues IOs.
This leaves the iocg with stuck abs_vdebt - it has debt but inactive and no
further IOs which can activate it. This can end up unduly punishing all the
descendants cgroups.
The usual throttling path has the same issue - the iocg must be active while
throttled to ensure that future event will wake it up - and solves the
problem by synchronizing the throttling path with a spinlock. abs_vdebt
handling is another form of overage handling and shares a lot of
characteristics including the fact that it isn't in the hottest path.
This patch fixes the above and other possible races by strictly
synchronizing abs_vdebt and use_delay handling with iocg->waitq.lock.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Vlad Dmitriev <vvd@fb.com>
Cc: stable@vger.kernel.org # v5.4+
Fixes: e1518f63f2 ("blk-iocost: Don't let merges push vtime into the future")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On each IO completion, iocost decides whether the IO met or missed its latency
target. Currently, the targets are fixed numbers per IO type. While this can be
good enough for loose latency targets way higher than typical completion
latencies, the effect of IO size makes it difficult to tighten the latency
target - a target adequate for 4k IOs might be too tight for 512k IOs and
vice-versa.
iocost already has all the necessary information to account for different IO
sizes when testing whether the latency target is met as iocost can calculate the
size vtime cost of a given IO. This patch updates the completion path to
calculate the size vtime cost of the IO, deduct the nsec equivalent from the
observed latency and use the adjusted value to decide whether the target is met.
This makes latency targets independent from IO size and enables determining
adequate latency targets with fixed size fio runs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andy Newell <newella@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The use_delay mechanism was introduced by blk-iolatency to hold memory
allocators accountable for the reclaim and other shared IOs they cause. The
duration of the delay is dynamically balanced between iolatency increasing the
value on each target miss and it auto-decaying as time passes and threads get
delayed on it.
While this works well for iolatency, iocost's control model isn't compatible
with it. There is no repeated "violation" events which can be balanced against
auto-decaying. iocost instead knows how much a given cgroup is over budget and
wants to prevent that cgroup from issuing IOs while over budget. Until now,
iocost has been adding the cost of force-issued IOs. However, this doesn't
reflect the amount which is already over budget and is simply not enough to
counter the auto-decaying allowing anon-memory leaking low priority cgroup to
go over its alloted share of IOs.
As auto-decaying doesn't make much sense for iocost, this patch introduces a
different mode of operation for use_delay - when blkcg_set_delay() are used
insted of blkcg_add/use_delay(), the delay duration is not auto-decayed until it
is explicitly cleared with blkcg_clear_delay(). iocost is updated to keep the
delay duration synchronized to the budget overage amount.
With this change, iocost can effectively police cgroups which generate
significant amount of force-issued IOs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When replacing the bd_super check with a bd_openers I followed a logical
conclusion, which turns out to be utterly wrong. When a block device has
bd_super sets it has a mount file system on it (although not every
mounted file system sets bd_super), but that also implies it doesn't even
have partitions to start with.
So instead of trying to come up with a logical check for all openers,
just remove the check entirely.
Fixes: d3ef553627 ("block: fix busy device checking in blk_drop_partitions")
Fixes: cb6b771b05 ("block: fix busy device checking in blk_drop_partitions again")
Reported-by: Michal Koutný <mkoutny@suse.com>
Reported-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a little helper that passes the right nowait flag to blk_queue_enter
based on the bio flag, and terminates the bio with the right error code
if entering the queue fails.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BIO_QUEUE_ENTERED is only used for cgroup accounting now, so rename
the flag and move setting it into the cgroup code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of a convoluted chain just check for REQ_OP_READ directly,
and keep all the memory stall code together in a single unlikely
branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current documentation is a little weird, as it doesn't clearly
explain which function to use, and also has the guts of the information
on generic_make_request, which is the internal interface for stacking
drivers.
Fix this up by properly documenting submit_bio, and only documenting
the differences and the use case for generic_make_request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix sparse warnings:
block/blk-mq-sched.c:209:5: warning: symbol '__blk_mq_sched_dispatch_requests' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Call blk_mq_make_request when no ->make_request_fn is set. This is
safe now that blk_alloc_queue always sets up the pointer for make_request
based drivers. This avoids an indirect call in the blk-mq driver I/O
fast path, which is rather expensive due to spectre mitigations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
create_io_context just has a single caller, which also happens to not
even use the return value. Just open code it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Flushes bypass the I/O scheduler and get added to hctx->dispatch
in blk_mq_sched_bypass_insert. This can happen while a kworker is running
hctx->run_work work item and is past the point in
blk_mq_sched_dispatch_requests where hctx->dispatch is checked.
The blk_mq_do_dispatch_sched call is not guaranteed to end in bounded time,
because the I/O scheduler can feed an arbitrary number of commands.
Since we have only one hctx->run_work, the commands waiting in
hctx->dispatch will wait an arbitrary length of time for run_work to be
rerun.
A similar phenomenon exists with dispatches from the software queue.
The solution is to poll hctx->dispatch in blk_mq_do_dispatch_sched and
blk_mq_do_dispatch_ctx and return from the run_work handler and let it
rerun.
Signed-off-by: Salman Qazi <sqazi@google.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are only two callers of blk_rq_map_sg/__blk_rq_map_sg that set
the dma_pad value in the queue. Move the handling into those callers
instead of burdening the common code, and move the ->extra_len field
from struct request to struct scsi_cmnd.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't burden the common block code with with specifics of the libata DMA
draining mechanism. Instead move most of the code to the scsi midlayer.
That also means the nr_phys_segments adjustments in the blk-mq fast path
can go away entirely, given that SCSI never looks at nr_phys_segments
after mapping the request to a scatterlist.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To be able to move some of the special purpose hacks in blk_rq_map_sg
into the callers we need a variant that returns the last mapped
S/G list element to the caller. Add that variant as __blk_rq_map_sg
and make blk_rq_map_sg a trivial inline wrapper around it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The RQF_COPY_USER is set for bio where the passthrough request mapping
helpers decided that bounce buffering is required. It is then used to
pad scatterlist for drivers that required it. But given that
non-passthrough requests are per definition aligned, and directly mapped
pass-through request must be aligned it is not actually required at all.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Systemtap 4.2 is unable to correctly interpret the "u32 (*missed_ppm)[2]"
argument of the iocost_ioc_vrate_adj trace entry defined in
include/trace/events/iocost.h leading to the following error:
/tmp/stapAcz0G0/stap_c89c58b83cea1724e26395efa9ed4939_6321_aux_6.c:78:8:
error: expected ‘;’, ‘,’ or ‘)’ before ‘*’ token
, u32[]* __tracepoint_arg_missed_ppm
That argument type is indeed rather complex and hard to read. Looking
at block/blk-iocost.c. It is just a 2-entry u32 array. By simplifying
the argument to a simple "u32 *missed_ppm" and adjusting the trace
entry accordingly, the compilation error was gone.
Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
invalidate_partition and bdev_unhash_inode are always paired, and
invalidate_partition already does an icache lookup for the block device
inode. Piggy back on that to remove the inode from the hash.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
invalidate_partition is only used in genhd.c, so mark it static. Also
drop the return value given that is is always ignored.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We just checked a little above that the block device for the partition
im busy. That implies no file system is mounted, and thus the only
thing in fsync_bdev that actually is used is sync_blockdev. Just call
sync_blockdev directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Given that the device must not be busy, most of the calls from
invalidate_partition that are related to file system metadata are
guranteed to not happen. Just open code the calls to sync_blockdev
and invalidate_bdev instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the blk_drop_partitions function instead of messing around with
ioctls that get kernel pointers. For this blk_drop_partitions needs
to be exported, which it normally shouldn't - make an exception for
s390 only.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The gendisk can be trivially deducted from the block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function has a single caller, so just open code it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move hd_ref_init out of line as there it isn't anywhere near a fast path,
and rename the rcu ref freeing callbacks to be more descriptive.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All callers have the hd_struct at hand, so pass it instead of performing
another lookup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split each sub-command out into a separate helper, and move those helpers
to block/partitions/core.c instead of having a lot of partition
manipulation logic open coded in block/ioctl.c.
Signed-off-by: Christoph Hellwig <hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If ever a thread running blk-mq code tries to get budget and fails it
immediately stops doing work and assumes that whenever budget is freed
up that queues will be kicked and whatever work the thread was trying
to do will be tried again.
One path where budget is freed and queues are kicked in the normal
case can be seen in scsi_finish_command(). Specifically:
- scsi_finish_command()
- scsi_device_unbusy()
- # Decrement "device_busy", AKA release budget
- scsi_io_completion()
- scsi_end_request()
- blk_mq_run_hw_queues()
The above is all well and good. The problem comes up when a thread
claims the budget but then releases it without actually dispatching
any work. Since we didn't schedule any work we'll never run the path
of finishing work / kicking the queues.
This isn't often actually a problem which is why this issue has
existed for a while and nobody noticed. Specifically we only get into
this situation when we unexpectedly found that we weren't going to do
any work. Code that later receives new work kicks the queues. All
good, right?
The problem shows up, however, if timing is just wrong and we hit a
race. To see this race let's think about the case where we only have
a budget of 1 (only one thread can hold budget). Now imagine that a
thread got budget and then decided not to dispatch work. It's about
to call put_budget() but then the thread gets context switched out for
a long, long time. While in this state, any and all kicks of the
queue (like the when we received new work) will be no-ops because
nobody can get budget. Finally the thread holding budget gets to run
again and returns. All the normal kicks will have been no-ops and we
have an I/O stall.
As you can see from the above, you need just the right timing to see
the race. To start with, the only case it happens if we thought we
had work, actually managed to get the budget, but then actually didn't
have work. That's pretty rare to start with. Even then, there's
usually a very small amount of time between realizing that there's no
work and putting the budget. During this small amount of time new
work has to come in and the queue kick has to make it all the way to
trying to get the budget and fail. It's pretty unlikely.
One case where this could have failed is illustrated by an example of
threads running blk_mq_do_dispatch_sched():
* Threads A and B both run has_work() at the same time with the same
"hctx". Imagine has_work() is exact. There's no lock, so it's OK
if Thread A and B both get back true.
* Thread B gets interrupted for a long time right after it decides
that there is work. Maybe its CPU gets an interrupt and the
interrupt handler is slow.
* Thread A runs, get budget, dispatches work.
* Thread A's work finishes and budget is released.
* Thread B finally runs again and gets budget.
* Since Thread A already took care of the work and no new work has
come in, Thread B will get NULL from dispatch_request(). I believe
this is specifically why dispatch_request() is allowed to return
NULL in the first place if has_work() must be exact.
* Thread B will now be holding the budget and is about to call
put_budget(), but hasn't called it yet.
* Thread B gets interrupted for a long time (again). Dang interrupts.
* Now Thread C (maybe with a different "hctx" but the same queue)
comes along and runs blk_mq_do_dispatch_sched().
* Thread C won't do anything because it can't get budget.
* Finally Thread B will run again and put the budget without kicking
any queues.
Even though the example above is with blk_mq_do_dispatch_sched() I
believe the race is possible any time someone is holding budget but
doesn't do work.
Unfortunately, the unlikely has become more likely if you happen to be
using the BFQ I/O scheduler. BFQ, by design, sometimes returns "true"
for has_work() but then NULL for dispatch_request() and stays in this
state for a while (currently up to 9 ms). Suddenly you only need one
race to hit, not two races in a row. With my current setup this is
easy to reproduce in reboot tests and traces have actually shown that
we hit a race similar to the one described above.
Note that we only need to fix blk_mq_do_dispatch_sched() and
blk_mq_do_dispatch_ctx() and not the other places that put budget. In
other cases we know that we have work to do on at least one "hctx" and
code already exists to kick that "hctx"'s queue. When that work
finally finishes all the queues will be kicked using the normal flow.
One last note is that (at least in the SCSI case) budget is shared by
all "hctx"s that have the same queue. Thus we need to make sure to
kick the whole queue, not just re-run dispatching on a single "hctx".
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have:
* blk_mq_run_hw_queue()
* blk_mq_delay_run_hw_queue()
* blk_mq_run_hw_queues()
...but not blk_mq_delay_run_hw_queues(), presumably because nobody
needed it before now. Since we need it for a later patch in this
series, add it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In blk_mq_dispatch_rq_list(), if blk_mq_sched_needs_restart() returns
true and the driver returns BLK_STS_RESOURCE then we'll kick the
queue. However, there's another case where we might need to kick it.
If we were unable to get budget we can be in much the same state as
when the driver returns BLK_STS_RESOURCE, so we should treat it the
same.
It should be noted that even if we add a whole bunch of extra kicking
to the queue in other patches this patch is still important.
Specifically any kicking that happened before we re-spliced leftover
requests into 'hctx->dispatch' wouldn't have found any work, so we
really need to make sure we kick ourselves after we've done the
splicing.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use tracepoint_string() for string literals that are used in the
wbt_step tracepoint, so that userspace tools can display the string
content.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If in blk_mq_dispatch_rq_list() we find no budget, then we break of the
dispatch loop, but the request may keep the driver tag, evaulated
in 'nxt' in the previous loop iteration.
Fix by putting the driver tag for that request.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl6QhDIQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpsE/EADOQ0xDMOa8EmzRvjuCkiaB9yK2zXiBSAj5
ZBi7ReownfXhCR7nVc8Bv1s2f00PD6CFNURXZmdgyDDrXEd2ojueDoAZNBk59t0e
i2CAF2wLAQ5EfuVaxSHVEOrVEmtu+ue+Ix83JNlnGPd7pf9s7uKc/W4iKGpgpxIo
1CpXmWwm5RwjX4z/Qsiaka2lB7QojjImp1n3C+XI5+pp/bJXiftep1lxH5Y3nSWU
iR4jO81uxDMxhTEZ9z2cb1HarhctKvnihcb39gQYQ/kYYu7hSZnBPZo5zp5Dyb/t
4tGuDsfXCQCbF0smkusUrcyeT19vh9tOsGkiMzJ/ihm7TMyN4fT23h6DUb/7pAON
jnlcB7r5Ezs8jLz9i+mAoq06djd5u54kiuKFog8170sTrtYsncZbyc01wLNAla/V
/6KX1sMbPlbXZ+a3l3i7i/gcCBJ7ci6pV3x2elvM9dKHxyqJmwEGMlFVwt4s26ev
wS+7+dktLAC73889Zyn8LutA4bWy5FmisSPA4PydSUSOZA+7JjlbILcz15jjwlP2
HzYk+TXsd3yJUQRYX5P0FcDaBUTISr/xeUUB+KT1rLv4Lhtso+S/9cvSc8x5mOa9
989gmqNfFAWoj1nKEIKeRwLjk0b6YA9qMv4jOwwiuobsT55aBxpbP80huNoRVj5L
xFIWgBSwzg==
=3woC
-----END PGP SIGNATURE-----
Merge tag 'block-5.7-2020-04-10' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Here's a set of fixes that should go into this merge window. This
contains:
- NVMe pull request from Christoph with various fixes
- Better discard support for loop (Evan)
- Only call ->commit_rqs() if we have queued IO (Keith)
- blkcg offlining fixes (Tejun)
- fix (and fix the fix) for busy partitions"
* tag 'block-5.7-2020-04-10' of git://git.kernel.dk/linux-block:
block: fix busy device checking in blk_drop_partitions again
block: fix busy device checking in blk_drop_partitions
nvmet-rdma: fix double free of rdma queue
blk-mq: don't commit_rqs() if none were queued
nvme-fc: Revert "add module to ops template to allow module references"
nvme: fix deadlock caused by ANA update wrong locking
nvmet-rdma: fix bonding failover possible NULL deref
loop: Better discard support for block devices
loop: Report EOPNOTSUPP properly
nvmet: fix NULL dereference when removing a referral
nvme: inherit stable pages constraint in the mpath stack device
blkcg: don't offline parent blkcg first
blkcg: rename blkcg->cgwb_refcnt to ->online_pin and always use it
nvme-tcp: fix possible crash in recv error flow
nvme-tcp: don't poll a non-live queue
nvme-tcp: fix possible crash in write_zeroes processing
nvmet-fc: fix typo in comment
nvme-rdma: Replace comma with a semicolon
nvme-fcloop: fix deallocation of working context
nvme: fix compat address handling in several ioctls
The previous fix had an off by one in the bd_openers checking, counting
the callers blkdev_get.
Fixes: d3ef553627 ("block: fix busy device checking in blk_drop_partitions")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bd_super is only set by get_tree_bdev and mount_bdev, and thus not by
other openers like btrfs or the XFS realtime and log devices, as well as
block devices directly opened from user space. Check bd_openers
instead.
Fixes: 77032ca66f ("Return EBUSY from BLKRRPART for mounted whole-dev fs")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unburden the drivers from checking if a call to commit_rqs() is valid by
not calling it when there are no requests to commit.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
update changing all our txt files to rst ones. Excluding that, we
have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc,
pm80xx, aacraid), a treewide update for scnprintf and some other minor
updates. The major core update is Hannes moving functions out of the
aacraid driver and into the core.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXoYKiyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSasAP4iGwSB
Y8tFaZgWadu76+wj5MdqTBoXdhnIuFF0rZG3pQEAiIKdsfQlbSFdm75+gUtx5hG/
GOilX/pJczTRJDCGNis=
=g7Sk
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series has a huge amount of churn because it pulls in Mauro's doc
update changing all our txt files to rst ones.
Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc,
zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and
some other minor updates.
The major core change is Hannes moving functions out of the aacraid
driver and into the core"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits)
scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code
scsi: ufs: Do not rely on prefetched data
scsi: dc395x: remove dc395x_bios_param
scsi: libiscsi: Fix error count for active session
scsi: hpsa: correct race condition in offload enabled
scsi: message: fusion: Replace zero-length array with flexible-array member
scsi: qedi: Add PCI shutdown handler support
scsi: qedi: Add MFW error recovery process
scsi: ufs: Enable block layer runtime PM for well-known logical units
scsi: ufs-qcom: Override devfreq parameters
scsi: ufshcd: Let vendor override devfreq parameters
scsi: ufshcd: Update the set frequency to devfreq
scsi: ufs: Resume ufs host before accessing ufs device
scsi: ufs-mediatek: customize the delay for enabling host
scsi: ufs: make HCE polling more compact to improve initialization latency
scsi: ufs: allow custom delay prior to host enabling
scsi: ufs-mediatek: use common delay function
scsi: ufs: introduce common and flexible delay function
scsi: ufs: use an enum for host capabilities
scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()
...
Pull trivial tree updates from Jiri Kosina:
"My attempt to revitalize trivial queue I've been neglecting for years
(what a disaster that was for this world, right? :) ) with patches
collected from backlog that were still relevant and not applied
elsewhere in the meantime"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
err.h: remove deprecated PTR_RET for good
blk-mq: Fix typo in comment
x86/boot: Fix comment spelling
sh: mach-highlander: Fix comment spelling
s390/dasd: Fix comment spelling
mfd: wm8994: Fix comment spelling
docs: Add reference in binfmt-misc.rst
genirq: fix kerneldoc comment for irq_desc
drm/amdgpu: fix two documentation mismatch issues
HID: fix Kconfig word ordering
list/hashtable: minor documentation corrections.
blkcg->cgwb_refcnt is used to delay blkcg offlining so that blkgs
don't get offlined while there are active cgwbs on them. However, it
ends up making offlining unordered sometimes causing parents to be
offlined before children.
Let's fix this by making child blkcgs pin the parents' online states.
Note that pin/unpin names are chosen over get/put intentionally
because css uses get/put online for something different.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkcg->cgwb_refcnt is used to delay blkcg offlining so that blkgs
don't get offlined while there are active cgwbs on them. However, it
ends up making offlining unordered sometimes causing parents to be
offlined before children.
To fix it, we want child blkcgs to pin the parents' online states
turning the refcnt into a more generic online pinning mechanism.
In prepartion,
* blkcg->cgwb_refcnt -> blkcg->online_pin
* blkcg_cgwb_get/put() -> blkcg_pin/unpin_online()
* Take them out of CONFIG_CGROUP_WRITEBACK
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull EFI updates from Ingo Molnar:
"The EFI changes in this cycle are much larger than usual, for two
(positive) reasons:
- The GRUB project is showing signs of life again, resulting in the
introduction of the generic Linux/UEFI boot protocol, instead of
x86 specific hacks which are increasingly difficult to maintain.
There's hope that all future extensions will now go through that
boot protocol.
- Preparatory work for RISC-V EFI support.
The main changes are:
- Boot time GDT handling changes
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file
I/O, memory allocation, etc.
- Introduce a generic initrd loading method based on calling back
into the firmware, instead of relying on the x86 EFI handover
protocol or device tree.
- Introduce a mixed mode boot method that does not rely on the x86
EFI handover protocol either, and could potentially be adopted by
other architectures (if another one ever surfaces where one
execution mode is a superset of another)
- Clean up the contents of 'struct efi', and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit
firmware implementations to return EFI_UNSUPPORTED from UEFI
runtime services at OS runtime, and expose a mask of which ones are
supported or unsupported via a configuration table.
- Partial fix for the lack of by-VA cache maintenance in the
decompressor on 32-bit ARM.
- Changes to load device firmware from EFI boot service memory
regions
- Various documentation updates and minor code cleanups and fixes"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
efi/libstub/arm: Fix spurious message that an initrd was loaded
efi/libstub/arm64: Avoid image_base value from efi_loaded_image
partitions/efi: Fix partition name parsing in GUID partition entry
efi/x86: Fix cast of image argument
efi/libstub/x86: Use ULONG_MAX as upper bound for all allocations
efi: Fix a mistype in comments mentioning efivar_entry_iter_begin()
efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux
efi/x86: Preserve %ebx correctly in efi_set_virtual_address_map()
efi/x86: Ignore the memory attributes table on i386
efi/x86: Don't relocate the kernel unless necessary
efi/x86: Remove extra headroom for setup block
efi/x86: Add kernel preferred address to PE header
efi/x86: Decompress at start of PE image load address
x86/boot/compressed/32: Save the output address instead of recalculating it
efi/libstub/x86: Deal with exit() boot service returning
x86/boot: Use unsigned comparison for addresses
efi/x86: Avoid using code32_start
efi/x86: Make efi32_pe_entry() more readable
efi/x86: Respect 32-bit ABI in efi32_pe_entry()
efi/x86: Annotate the LOADED_IMAGE_PROTOCOL_GUID with SYM_DATA
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl6BJCoQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpvziEACqQC+QRKiqR6X5yaPWJ9LqjKE7lfI1PUb7
0a1z1mKuf8d6z0qNleUwdSOEaS5zJiswou2K8GLvEtTQH41QYsQkxc9GLjAyTveK
szAyzZaa3BNUy9hkczm9i2arv3fI8XoTE3JvRM0e9wL8fBJDYCtKtHFJvF4hisOQ
ydaJlU6tcwzd9bdV7K5dLwBxu3AeAJjzS3Tyfw25u9N9O/btUxJ91RTqBb2+Xeoz
AVasfRlAqf/CzdjxCCmDgWE2QM4852pAeQ7UJJBGISNWNoiwkezMg+6HD0jEOLee
bQ8uDyQdihIWTY+/zQasotX8/71uLV8QgtjWLXR9zrjrubIBWHGzoWSQ4kPg5DfQ
bJmKO0VvWN2sshZEpWvzzAFGYxZViNphbK2Pb4hKOcv7jtMcC8mmEogh/7EqbD/n
KB3IM9qVoXM8INm5o0dTy5uDRJxiHiHYkqsZaKz55BB/R4Geym5TINT3nXgxhQrn
JoSwp4zdm3/NJOySruDi2eETqWJC2bsz3FsQSyCQTPOuP0nLtFKBb1UKHpmYTCXG
H4LCyCKFJ6s006qBcdaNPZBw1mrSNwoxEulHnpYA4BFfPeXi72yrnMZQkdwWONpW
LIVuD0hBm8X/pulbvEEdjzXBqZVkqK3xFX+uX5+bnwwaUKddXAC/h9SQKpBP2Mbb
AeZToMklKw==
=6Glq
-----END PGP SIGNATURE-----
Merge tag 'for-5.7/block-2020-03-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Online capacity resizing (Balbir)
- Number of hardware queue change fixes (Bart)
- null_blk fault injection addition (Bart)
- Cleanup of queue allocation, unifying the node/no-node API
(Christoph)
- Cleanup of genhd, moving code to where it makes sense (Christoph)
- Cleanup of the partition handling code (Christoph)
- disk stat fixes/improvements (Konstantin)
- BFQ improvements (Paolo)
- Various fixes and improvements
* tag 'for-5.7/block-2020-03-29' of git://git.kernel.dk/linux-block: (72 commits)
block: return NULL in blk_alloc_queue() on error
block: move bio_map_* to blk-map.c
Revert "blkdev: check for valid request queue before issuing flush"
block: simplify queue allocation
bcache: pass the make_request methods to blk_queue_make_request
null_blk: use blk_mq_init_queue_data
block: add a blk_mq_init_queue_data helper
block: move the ->devnode callback to struct block_device_operations
block: move the part_stat* helpers from genhd.h to a new header
block: move block layer internals out of include/linux/genhd.h
block: move guard_bio_eod to bio.c
block: unexport get_gendisk
block: unexport disk_map_sector_rcu
block: unexport disk_get_part
block: mark part_in_flight and part_in_flight_rw static
block: mark block_depr static
block: factor out requeue handling from dispatch code
block/diskstats: replace time_in_queue with sum of request times
block/diskstats: accumulate all per-cpu counters in one pass
block/diskstats: more accurate approximation of io_ticks for slow disks
...
This patch fixes follwoing warning:
block/blk-core.c: In function ‘blk_alloc_queue’:
block/blk-core.c:558:10: warning: returning ‘int’ from a function with return type ‘struct request_queue *’ makes pointer from integer without a cast [-Wint-conversion]
return -EINVAL;
Fixes: 3d745ea5b0 ("block: simplify queue allocation")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to stringify the zone conditions. We use this helper in the
next patch to track zone conditions in tracepoints.
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The bio_map_* helpers are just the low-level helpers for the
blk_rq_map_* APIs. Move them together for better logical grouping,
as no there isn't much overlap with other code in bio.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit f10d9f617a.
We can't have queues without a make_request_fn any more (and the
loop device uses blk-mq these days anyway..).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current make_request based drivers use either blk_alloc_queue_node or
blk_alloc_queue to allocate a queue, and then set up the make_request_fn
function pointer and a few parameters using the blk_queue_make_request
helper. Simplify this by passing the make_request pointer to
blk_alloc_queue, and while at it merge the _node variant into the main
helper by always passing a node_id, and remove the superfluous gfp_mask
parameter. A lower-level __blk_alloc_queue is kept for the blk-mq case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This allows a driver to pass a queuedata member before ->init_hctx is
called. null_blk currently open codes this logic, but I'd rather have
it in the core to ease future maintainance.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There really isn't any good reason to stash a method directly into
struct gendisk. Move it together with the other block device
operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These macros are just used by a few files. Move them out of genhd.h,
which is included everywhere into a new standalone header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is bio layer functionality and not related to buffer heads.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out the requeue handling from the dispatch code, this will make
subsequent addition of different requeueing schemes easier.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Column "time_in_queue" in diskstats is supposed to show total waiting time
of all requests. I.e. value should be equal to the sum of times from other
columns. But this is not true, because column "time_in_queue" is counted
separately in jiffies rather than in nanoseconds as other times.
This patch removes redundant counter for "time_in_queue" and shows total
time of read, write, discard and flush requests.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently io_ticks is approximated by adding one at each start and end of
requests if jiffies counter has changed. This works perfectly for requests
shorter than a jiffy or if one of requests starts/ends at each jiffy.
If disk executes just one request at a time and they are longer than two
jiffies then only first and last jiffies will be accounted.
Fix is simple: at the end of request add up into io_ticks jiffies passed
since last update rather than just one jiffy.
Example: common HDD executes random read 4k requests around 12ms.
fio --name=test --filename=/dev/sdb --rw=randread --direct=1 --runtime=30 &
iostat -x 10 sdb
Note changes of iostat's "%util" 8,43% -> 99,99% before/after patch:
Before:
Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util
sdb 0,00 0,00 82,60 0,00 330,40 0,00 8,00 0,96 12,09 12,09 0,00 1,02 8,43
After:
Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util
sdb 0,00 0,00 82,50 0,00 330,00 0,00 8,00 1,00 12,10 12,10 0,00 12,12 99,99
Now io_ticks does not loose time between start and end of requests, but
for queue-depth > 1 some I/O time between adjacent starts might be lost.
For load estimation "%util" is not as useful as average queue length,
but it clearly shows how often disk queue is completely empty.
Fixes: 5b18b5a737 ("block: delete part_round_stats and switch to less precise counting")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge block/partition-generic.c and block/partitions/check.c into
a single block/partitions/core.c as the content is closely related
and both files are tiny.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All these are just used in block/partitions/msdos.c, so move them out of the
genhd.h driver included by every driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just always use NEW_SOLARIS_X86_PARTITION and explain the situation,
as that is less confusing than two names for a single value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The enum containing the *_PARTITION symbolic names is only relevant
for the partition parser. More specifically most values are MSDOS
partition table system indicators and thus should go straight into
msdos.c. One value is only used by the sun partition parser, and the
sun and sgi partition parsers use the same value as the x86 Linux
RAID indicator to also indicate RAID autodetection. Duplicate them
in sun.c and sgi.c given that the different partition types use
entirely different values otherwise.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
struct partition is the on-disk format of a MSDOS partition table entry.
Move it out of genhd.h into a new msdos_partition.h header and give it
a msdos_ prefix to avoid confusion.
Also move the magic number from block/partitions/msdos.h to the new
header so that it can be used by the SCSI drivers looking at the DOS
partition tables.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no good reason to include one header per partition type in
core.c. Instead move the prototypes for the detection routins to
check.h, and remove all now empty headers in block/partitions/.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The warn_no_part is initialized to 1 and never changed. Remove
it and execute the code keyed off from it unconditionally.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new include/linux/raid/detect.h header to declare the
md_autodetect_dev prototype which can be shared between md and
the partition code. Then use IS_BUILTIN to call it instead of the
ifdef magic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
read_dev_sector and put_dev_sector are now only used by the partition
parsing code. Remove the export for read_dev_sector and merge it into
the only caller. Clean the mess up a bit by using goto labels and
the SECTOR_SHIFT constant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There isn't any good reason not to simply open code the allocation and
freeing of the partition_meta_info structure. Especially as one of
the branches in alloc_part_info is entirely dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the sysfs _show methods that are used both on the full disk and
partition nodes to genhd.c instead of hiding them in the partitioning
code. Also move the declaration for these methods to block/blk.h so
that we don't expose them to drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Thes functions aren't really related to partition support, so move them
to a more suitable place.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no good reason for __bdevname to exist. Just open code
printing the string in the callers. For three of them the format
string can be trivially merged into existing printk statements,
and in init/do_mounts.c we can at least do the scnprintf once at
the start of the function, and unconditional of CONFIG_BLOCK to
make the output for tiny configfs a little more helpful.
Acked-by: Theodore Ts'o <tytso@mit.edu> # for ext4
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function is only used by init/do_mounts.c, which can't be modular.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In bfq_pd_offline(), the function bfq_flush_idle_tree() is invoked to
flush the rb tree that contains all idle entities belonging to the pd
(cgroup) being destroyed. In particular, bfq_flush_idle_tree() is
invoked before bfq_reparent_active_queues(). Yet the latter may happen
to add some entities to the idle tree. It happens if, in some of the
calls to bfq_bfqq_move() performed by bfq_reparent_active_queues(),
the queue to move is empty and gets expired.
This commit simply reverses the invocation order between
bfq_flush_idle_tree() and bfq_reparent_active_queues().
Tested-by: cki-project@redhat.com
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Johannes Thumshirn
Weiping Zhang