The 'memory-region' property of the komeda display driver DT binding
allows the use of a 'reserved-memory' node for buffer allocations. Add
the requisite of_reserved_mem_device_{init,release} calls to actually
make use of the memory if present.
Changes since v1:
- Move handling inside komeda_parse_dt
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Link:- https://patchwork.kernel.org/patch/11076413/
Drop use of the deprecated drmP.h header file.
While touching the list of include files divide them
into blocks and sort within each block.
Fix fallout.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: malidp@foss.arm.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190804094132.29463-5-sam@ravnborg.org
Add suffix ULL to constant 1000 in order to avoid a potential integer
overflow and give the compiler complete information about the proper
arithmetic to use. Notice that this constant is being used in a context
that expects an expression of type u64, but it's currently evaluated
using 32-bit arithmetic.
Addresses-Coverity-ID: 1485796 ("Unintentional integer overflow")
Fixes: ed22c6d930 ("drm/komeda: Use drm_display_mode "crtc_" prefixed hardware timings")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812000801.GA29204@embeddedor
Komeda HW can support dual-link which splits display frame to two halves
(left/link0, right/link1) and output them by two output links.
Due to the halved pixel rate of each link, the pxlclk of dual-link can be
reduced two times compare with single-link.
For enabling dual-link:
- The DT need to configure two output-links for the pipeline node.
- Komeda enable dual-link when both link0 and link1 have been connected.
Example of how the pipeline node will look like for dual-link setup
pipe0: pipeline@0 {
clocks = <&fpgaosc2>;
clock-names = "pxclk";
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
dp0_pipe0_link0: endpoint@0 {
reg = <0>;
remote-endpoint = <&dlink_connector_in0>;
};
dp0_pipe0_link1: endpoint@1 {
reg = <1>;
remote-endpoint = <&dlink_connector_in1>;
};
};
};
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618081013.13638-3-james.qian.wang@arm.com
struct drm_display_mode contains two copies of timings.
- plain timings.
- hardware timings, the ones with "crtc_" prefix.
According to the definition, update komeda to use the hardware timing.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618081013.13638-2-james.qian.wang@arm.com
Now that -Wimplicit-fallthrough is passed to GCC by default, the
following warnings shows up:
../drivers/gpu/drm/arm/malidp_hw.c: In function ‘malidp_format_get_bpp’:
../drivers/gpu/drm/arm/malidp_hw.c:387:8: warning: this statement may fall
through [-Wimplicit-fallthrough=]
bpp = 30;
~~~~^~~~
../drivers/gpu/drm/arm/malidp_hw.c:388:3: note: here
case DRM_FORMAT_YUV420_10BIT:
^~~~
../drivers/gpu/drm/arm/malidp_hw.c: In function ‘malidp_se_irq’:
../drivers/gpu/drm/arm/malidp_hw.c:1311:4: warning: this statement may fall
through [-Wimplicit-fallthrough=]
drm_writeback_signal_completion(&malidp->mw_connector, 0);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/arm/malidp_hw.c:1313:3: note: here
case MW_START:
^~~~
Rework to add a 'break;' in a case that didn't have it so that
the compiler doesn't warn about fall-through.
Cc: stable@vger.kernel.org # v5.2+
Fixes: b8207562ab ("drm/arm/malidp: Specified the rotation memory requirements for AFBC YUV formats")
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730153056.3606-1-anders.roxell@linaro.org
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/arm/display/komeda/komeda_plane.c:
In function komeda_plane_atomic_duplicate_state:
drivers/gpu/drm/arm/display/komeda/komeda_plane.c:161:35:
warning: variable old set but not used [-Wunused-but-set-variable
It is not used since commit 990dee3aa4 ("drm/komeda:
Computing image enhancer internally")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722055627.38008-1-yuehaibing@huawei.com
For layer_split no need user to enable/disable it, but compute it in
komeda internally, komeda will enable it if the scaling exceed the
acceptable range of scaler.
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708065923.4887-1-james.qian.wang@arm.com
Properties are uapi like anything else, with all the usual rules
regarding review, testcases, open source userspace ... Furthermore
driver-private kms properties are highly discouraged, over the past
few years we've realized we need to make a serious effort at better
standardizing this stuff.
Again this probably needs multiple pieces to solve this properly:
- Instead of expecting userspace to compute this (and duplicating
modeset code), the kernel driver should compute when it's necessary
to enable layer_split mode to make a configuration possible. I.e. in
komeda_plane_atomic_check() first try komeda_build_layer_data_flow()
and if that fails, try komeda_build_layer_split_data_flow(), and set
dflow.en_split accordingly. Assuming I understand somewhat correctly
what this does.
- If this is needed for validation then you want a debugfs file to
force this one way or the other, or alternatively use
->atomic_print_state to dump such hidden driver-private state.
Depends upon how you do your validation ofc.
Fixes: a407a65093 ("drm/komeda: Add layer split support")
Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-4-daniel.vetter@ffwll.ch
Properties are uapi like anything else, with all the usual rules
regarding review, testcases, open source userspace ... Furthermore
driver-private kms properties are highly discouraged, over the past
few years we've realized we need to make a serious effort at better
standardizing this stuff.
Again this probably needs multiple pieces to solve this properly:
- Instead of expecting userspace to compute this (and duplicating
modeset code), the kernel driver should compute when it's possible
to enable this better up/downscale mode (assuming I understood
Liviu correctly on what this does) automatically.
- If this is needed for validation then you want a debugfs file to
force this one way or the other, or alternatively use
->atomic_print_state to dump such hidden driver-private state.
Depends upon how you do your validation ofc.
Fixes: 42b6f118f6 ("drm/komeda: Add image enhancement support")
Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-3-daniel.vetter@ffwll.ch
Properties are uapi like anything else, with all the usual rules
regarding review, testcases, open source userspace ... Furthermore
driver-private kms properties are highly discouraged, over the past
few years we've realized we need to make a serious effort at better
standardizing this stuff.
Again this probably needs multiple pieces to solve this properly:
- To make plane configuration less surprising to userspace you
propably need to virtualize planes, and reorder which logical plane
you map to which physical one dynamically. Instead of exposing a
komeda-specific limitation to userspace and expecting them to dtrt.
I think msm and rcar-du do that already (and others), if you need
people to chat with or example code.
- If this is needed for validation, again ->atomic_print_state and the
infrastructure around that is your friend.
Fixes: 3b9dfa4ef2 ("drm/komeda: Add slave pipeline support")
Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-2-daniel.vetter@ffwll.ch
Properties are uapi like anything else, with all the usual rules
regarding review, testcases, open source userspace ... Furthermore
driver-private kms properties are highly discouraged, over the past
few years we've realized we need to make a serious effort at better
standardizing this stuff.
From the discussion with Liviu the solution for these here needs
multiple pieces:
- For being able to reliably read the memory clock we need a DT
property, plus maybe DT override snippets to fix it if it's wrong.
- For exposing plane limitations to userspace there's TEST_ONLY. There
is a bit a gap in telling userspace better that scaling doesn't work
due to limits (atm a good strategy is to retry again without scaling
when adding a plane didn't work the first time around). But that
needs a more generic solution, not exposing something extremely
komeda specific.
- If this is needed by validation tools, you can still expose it in
debugfs. We have an entire nice infrastructure for debug printing of
kms objects already, see the various atomic_print_state callbacks
and infrastructure around them.
Fixes: 1f7f9ab790 ("drm/komeda: Add engine clock requirement check for the downscaling")
Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-1-daniel.vetter@ffwll.ch
They're the default.
Aside: Would be really nice to switch the others over to
drm_gem_object_funcs.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "James (Qian) Wang" <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-12-daniel.vetter@ffwll.ch
Read the docs, komeda is not an old enough driver for this :-)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "James (Qian) Wang" <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-8-daniel.vetter@ffwll.ch
Komeda interrupts may be shared with other hardware blocks.
One needs to use devm_request_irq() with IRQF_SHARED to create a shared
interrupt handler.
As a result of not using drm_irq_install() api, one needs to set
"(struct drm_device *)->irq_enabled = true/false" to enable/disable
vblank interrupts.
Changes from v1:-
1. Squashed the following two patches into one (as the second patch is a
consequence of the first one):-
drm/komeda: Avoid using DRIVER_IRQ_SHARED
drm/komeda: Enable/Disable vblank interrupts
2. Fixed the commit message (as pointed by Daniel Vetter)
3. Removed calls to 'drm_irq_uninstall()' as we are no longer using
drm_irq_install()
4. Removed the struct member 'komeda_kms_driver.irq_handler' as it is not
used anywhere.
Signed-off-by: Ayan Halder <ayan.halder@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
clang points out a bug in the clock calculation on 32-bit, that leads
to the clock_ratio always being zero:
drivers/gpu/drm/arm/display/komeda/komeda_crtc.c:31:36: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
aclk = komeda_calc_aclk(kcrtc_st) << 32;
Move the shift into the division to make it apply on a 64-bit
variable. Also use the more expensive div64_u64() instead of div_u64()
to account for pxlclk being a 64-bit integer.
Fixes: 1f7f9ab790 ("drm/komeda: Add engine clock requirement check for the downscaling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Warnings popup when "make ARCH=i386"
In file included from include/drm/drm_mm.h:49,
from include/drm/drm_vma_manager.h:26,
from include/drm/drm_gem.h:40,
from drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c:9:
drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c: In function 'komeda_fb_afbc_size_check':
drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c:96:17: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
DRM_DEBUG_KMS("afbc size check failed, obj_size: 0x%lx. min_size 0x%x.\n",
That leads by misuse "%lx" as format speicifier for size_t, correct it
to "%zx"
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: "James (Qian) Wang" <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Writeback split is also for workaround the size limitation of d71 scaler.
Like layer_split, writeback downscaling also can use two scalers to handle
the scaling half-by-half. The only differnence is writback needs a
standalone component (splitter)'s help to split the composition result.
The data pipeline of writeback split as below:
/-> scaler-0 ->\
compiz -> splitter merger -> wb_layer -> memory
\-> scaler-1 ->/
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Similar to Layer Split, but Splitter is used for writeback, which splits
the compiz result to two half parts and then feed them to two scalers.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
User may send null writeback configurations for writeback connector like:
- Only bind the writeback connector to crtc.
- set a fb_id(0) to writeback_fb_id_property
All above configurations are meaningless for writeback, but since they are
still valid configurations, accept them.
Depends on:
- https://patchwork.freedesktop.org/series/60856/
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Since the component_state->input[i] is only valid when it is active, the
content of input[i] is undefined if it is inactive. The user must check the
state->active_inputs with input index firstly before using state->input[i].
Refine the function to_d71_input_id and directly move such check into it.
Simplify the using and avoid problem that caller forget the valid check.
Depends on:
- https://patchwork.freedesktop.org/series/60856/
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
One crtc can use two komeda_pipeline, and one works as master and as
slave. the slave pipeline doesn't have its own output and timing
ctrlr, but pre-composite the input layer data flow and then feed the
result to master. the pipeline configuration like:
slave-layer-0 \
... slave->CU
slave-layer-4 / \
\
master-layer-0 --------> master->CU -> ...
... /
master-layer-4 ------>
Since komeda Compiz doesn't output alpha, so the slave->CU result
only can be used as bottom input when blend it with master input data
flows.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Komeda supports two types of layer split:
- none-scaling split
- scaling split
Since D71 merger only support scaler as input, so for none-scaling split,
the two layer dflow will be output to compiz directly. for scaling_split,
the data flow will be merged by merger firstly, then output the merged
data flow to compiz.
Komeda handles the split in kernel completely to hide the detailed and
complicated split calcualtion to user mode, for user only need to set the
layer_split property to enable/disable it.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
To achieve same caling effect compare with none split, the texel
calculation need to use the same scaling ratio before split, so add
"total_xxx" to pipeline to describe the hsize/vsize before split.
Update pipeline and d71_scaler_update accordingly.
v2: Rebase and addressed Liviu's comments
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Introduce a new component komeda_merger, because D71 HW supports to split
a whole image to two half parts and does the scaling independently. Merger
merges two separate results to one, and output it to compositor or wb_layer
For this patch:
- Add the definition of komeda_merger/merger_state
- Report and initialize komeda_merger according to the D71 HW.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
To avoid confusion, unify the driver main engine clk name "mclk" to
the spec name "aclk".
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Current komeda driver uses three dedicated clks for a specific purpose:
- mclk: main engine clock
- pclk: APB clock
- pipeline->aclk: AXI clock.
But per spec the komeda HW only has three input clks:
- ACLK: used for AXI masters, APB slave and most pipeline processing
- PXCLK for pipeline 0: output pixel clock for pipeline 0
- PXCLK for pipeline 1: output pixel clock for pipeline 1
So one ACLK is enough, no need to split it to three mclk/pclk/axiclk.
drop pclk/pipeline->axiclk. but only keep one mclk in komeda driver.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
- Y0L2 and P010 are block (tiled) format, Update the kemeda logic to
compatible with such block format.
- Since DRM introduced a general block information to drm_format_info,
the format_caps->tiled_size no long needed, delete it.
- Build some fb utils functions for code sharing.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Add komeda_fb_check_src_coords and check if the layer configured src
rect can meet the requirement of fb and fb format.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Adds iommu_connect and disconnect for SMMU support, and configures
TBU translation once SMMU has been attached to the display device.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
[fixed checking of error code returned by dp_wait_cond() and removed
extraneous DRM_ERROR() calls]
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Adds color-encoding properties if layer can support YUV format.
Updates HW YUV-RGB matrix state according to the color-encoding
properties.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Updates HW up-sampling method according to the format type.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Komeda series hardware doesn't support Rot90 for AFBC wide block. So
add limitation check to reject it if such configuration has been posted.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
- Adds rotation property to plane.
- Komeda display rotation support diverges from the specific formats,
so need to check the user required rotation type with the format caps
and reject the commit if it can not be supported.
- In the layer validate flow, sets the rotation value to the layer
state. If r90 or r270, swap the width and height of the data flow
for next stage.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Besides clearing the input ID to zero, D71 compiz also has input
enable bit in CU_INPUTx_CONTROL which need to be cleared.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
dp_wait_cond() currently returns the number of retries left over which
is hardly an useful information. Convert to returning -ETIMEDOUT when
the wait times out, or 0 (zero) when condition is met before deadline.
Also convert the users of the function to return the error value.
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Besides scaling, Arm display scaler also can support image enhancement.
For support it, Add a new property "img_enhancement" to plane, then user
can turn on/off it by this property, and kernel follow user's requirement
to maitain the state and enable/disable the real HW image enhancement.
v2: Rebase and rename "needs_img_enhancement" to "en_img_enhancement"
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
For downscaling there is a restriction, the downscaling needed engine
clock can not acceed the real engine clock, and the clock requirement
mostly depend on the specific HW, to solve this problem:
1. Add a pipeline func - downscaling_clk_check for CORE to query the real
HW if downscaling can be supported.
2. Add new property clock ratio which is the ratio of:
(mclk << 32) / pxlclk
then User driver can use this ratio to do the clock check to avoid post
an invalid downscaling to kernel.
v2: Rebase and Delete debug print
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
1. Add scaler to writeback pipeline to enable the writeback scaling support
2. Display HW can not do upscaling for writeback, check it when validate.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
1. Add scaler component and initialize it according to D71 HW.
2. Implement d71_scaler_update/disable/dump
v2:
- Correct a typo
- Constify component_funcs: d71_scaler_funcs
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
This patch add the initial and necessary logic for CORE to support scaler:
- Complete the struct komeda_scaler and komeda_scaler_state for adding
the scaler specific features and capablities.
- Implement komeda_scaler_validate to check the scaler with the data flow
configurations.
- Enable scaling support for plane input path (layer input data flow).
v2: Fix a typo, and rename "needs_scaling" to "en_scaling"
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
According to the komeda pipeline configuration, attach scaler to drm as
private object.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
For supporting AFBC:
1. Check if the user requested modifier can be supported by display HW.
2. Check the obj->size with AFBC's requirement.
3. Configure HW according to the modifier (afbc features)
This patch depends on:
- https://patchwork.freedesktop.org/series/59915/
- https://patchwork.freedesktop.org/series/59000/
v2: Rebase and addressed Ayan's comments
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Mihail Atanassov