Commit Graph

1148 Commits

Author SHA1 Message Date
Richard Alpe b34040227b tipc: add peer removal functionality
Add TIPC_NL_PEER_REMOVE netlink command. This command can remove
an offline peer node from the internal data structures.

This will be supported by the tipc user space tool in iproute2.

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18 23:36:07 -07:00
Jon Paul Maloy 5a0950c272 tipc: ensure that link congestion and wakeup use same criteria
When a link is attempted woken up after congestion, it uses a different,
more generous criteria than when it was originally declared congested.
This has the effect that the link, and the sending process, sometimes
will be woken up unnecessarily, just to immediately return to congestion
when it turns out there is not not enough space in its send queue to
host the pending message. This is a waste of CPU cycles.

We now change the function link_prepare_wakeup() to use exactly the same
criteria as tipc_link_xmit(). However, since we are now excluding the
window limit from the wakeup calculation, and the current backlog limit
for the lowest level is too small to house even a single maximum-size
message, we have to expand this limit. We do this by evaluating an
alternative, minimum value during the setting of the importance limits.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18 21:14:37 -07:00
Jon Paul Maloy 0d051bf93c tipc: make bearer packet filtering generic
In commit 5b7066c3dd ("tipc: stricter filtering of packets in bearer
layer") we introduced a method of filtering out messages while a bearer
is being reset, to avoid that links may be re-created and come back in
working state while we are still in the process of shutting them down.

This solution works well, but is limited to only work with L2 media, which
is insufficient with the increasing use of UDP as carrier media.

We now replace this solution with a more generic one, by introducing a
new flag "up" in the generic struct tipc_bearer. This field will be set
and reset at the same locations as with the previous solution, while
the packet filtering is moved to the generic code for the sending side.
On the receiving side, the filtering is still done in media specific
code, but now including the UDP bearer.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18 21:14:36 -07:00
Vegard Nossum d2fbdf76b8 tipc: fix NULL pointer dereference in shutdown()
tipc_msg_create() can return a NULL skb and if so, we shouldn't try to
call tipc_node_xmit_skb() on it.

    general protection fault: 0000 [#1] PREEMPT SMP KASAN
    CPU: 3 PID: 30298 Comm: trinity-c0 Not tainted 4.7.0-rc7+ #19
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
    task: ffff8800baf09980 ti: ffff8800595b8000 task.ti: ffff8800595b8000
    RIP: 0010:[<ffffffff830bb46b>]  [<ffffffff830bb46b>] tipc_node_xmit_skb+0x6b/0x140
    RSP: 0018:ffff8800595bfce8  EFLAGS: 00010246
    RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003023b0e0
    RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffffffff83d12580
    RBP: ffff8800595bfd78 R08: ffffed000b2b7f32 R09: 0000000000000000
    R10: fffffbfff0759725 R11: 0000000000000000 R12: 1ffff1000b2b7f9f
    R13: ffff8800595bfd58 R14: ffffffff83d12580 R15: dffffc0000000000
    FS:  00007fcdde242700(0000) GS:ffff88011af80000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007fcddde1db10 CR3: 000000006874b000 CR4: 00000000000006e0
    DR0: 00007fcdde248000 DR1: 00007fcddd73d000 DR2: 00007fcdde248000
    DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000090602
    Stack:
     0000000000000018 0000000000000018 0000000041b58ab3 ffffffff83954208
     ffffffff830bb400 ffff8800595bfd30 ffffffff8309d767 0000000000000018
     0000000000000018 ffff8800595bfd78 ffffffff8309da1a 00000000810ee611
    Call Trace:
     [<ffffffff830c84a3>] tipc_shutdown+0x553/0x880
     [<ffffffff825b4a3b>] SyS_shutdown+0x14b/0x170
     [<ffffffff8100334c>] do_syscall_64+0x19c/0x410
     [<ffffffff83295ca5>] entry_SYSCALL64_slow_path+0x25/0x25
    Code: 90 00 b4 0b 83 c7 00 f1 f1 f1 f1 4c 8d 6d e0 c7 40 04 00 00 00 f4 c7 40 08 f3 f3 f3 f3 48 89 d8 48 c1 e8 03 c7 45 b4 00 00 00 00 <80> 3c 30 00 75 78 48 8d 7b 08 49 8d 75 c0 48 b8 00 00 00 00 00
    RIP  [<ffffffff830bb46b>] tipc_node_xmit_skb+0x6b/0x140
     RSP <ffff8800595bfce8>
    ---[ end trace 57b0484e351e71f1 ]---

I feel like we should maybe return -ENOMEM or -ENOBUFS, but I'm not sure
userspace is equipped to handle that. Anyway, this is better than a GPF
and looks somewhat consistent with other tipc_msg_create() callers.

Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15 13:55:36 -07:00
Parthasarathy Bhuvaragan 672ca65d9a tipc: fix variable dereference before NULL check
In commit cf6f7e1d51 ("tipc: dump monitor attributes"),
I dereferenced a pointer before checking if its valid.
This is reported by static check Smatch as:
net/tipc/monitor.c:733 tipc_nl_add_monitor_peer()
     warn: variable dereferenced before check 'mon' (see line 731)

In this commit, we check for a valid monitor before proceeding
with any other operation.

Fixes: cf6f7e1d51 ("tipc: dump monitor attributes")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10 17:56:52 -07:00
Wei Yongjun 6b65bc2972 tipc: fix imbalance read_unlock_bh in __tipc_nl_add_monitor()
In the error handling case of nla_nest_start() failed read_unlock_bh()
is called  to unlock a lock that had not been taken yet. sparse warns
about the context imbalance as the following:

net/tipc/monitor.c:799:23: warning:
 context imbalance in '__tipc_nl_add_monitor' - different lock contexts for basic block

Fixes: cf6f7e1d51 ('tipc: dump monitor attributes')
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-30 20:38:22 -07:00
Parthasarathy Bhuvaragan cf6f7e1d51 tipc: dump monitor attributes
In this commit, we dump the monitor attributes when queried.
The link monitor attributes are separated into two kinds:
1. general attributes per bearer
2. specific attributes per node/peer
This style resembles the socket attributes and the nametable
publications per socket.

Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26 14:26:42 -07:00
Parthasarathy Bhuvaragan ff0d3e78a6 tipc: add a function to get the bearer name
Introduce a new function to get the bearer name from
its id. This is used in subsequent commit.

Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26 14:26:42 -07:00
Parthasarathy Bhuvaragan bf1035b2ff tipc: get monitor threshold for the cluster
In this commit, we add support to fetch the configured
cluster monitoring threshold.

Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26 14:26:42 -07:00
Parthasarathy Bhuvaragan 7b3f522964 tipc: make cluster size threshold for monitoring configurable
In this commit, we introduce support to configure the minimum
threshold to activate the new link monitoring algorithm.

Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26 14:26:42 -07:00
Parthasarathy Bhuvaragan 9ff26e9fab tipc: introduce constants for tipc address validation
In this commit, we introduce defines for tipc address size,
offset and mask specification for Zone.Cluster.Node.
There is no functional change in this commit.

Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26 14:26:42 -07:00
David S. Miller de0ba9a0d8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Just several instances of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-24 00:53:32 -04:00
Jon Paul Maloy 1fc07f3e15 tipc: reset all unicast links when broadcast send link fails
In test situations with many nodes and a heavily stressed system we have
observed that the transmission broadcast link may fail due to an
excessive number of retransmissions of the same packet. In such
situations we need to reset all unicast links to all peers, in order to
reset and re-synchronize the broadcast link.

In this commit, we add a new function tipc_bearer_reset_all() to be used
in such situations. The function scans across all bearers and resets all
their pertaining links.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11 22:42:12 -07:00
Jon Paul Maloy a71eb72035 tipc: ensure correct broadcast send buffer release when peer is lost
After a new receiver peer has been added to the broadcast transmission
link, we allow immediate transmission of new broadcast packets, trusting
that the new peer will not accept the packets until it has received the
previously sent unicast broadcast initialiation message. In the same
way, the sender must not accept any acknowledges until it has itself
received the broadcast initialization from the peer, as well as
confirmation of the reception of its own initialization message.

Furthermore, when a receiver peer goes down, the sender has to produce
the missing acknowledges from the lost peer locally, in order ensure
correct release of the buffers that were expected to be acknowledged by
the said peer.

In a highly stressed system we have observed that contact with a peer
may come up and be lost before the above mentioned broadcast initial-
ization and confirmation have been received. This leads to the locally
produced acknowledges being rejected, and the non-acknowledged buffers
to linger in the broadcast link transmission queue until it fills up
and the link goes into permanent congestion.

In this commit, we remedy this by temporarily setting the corresponding
broadcast receive link state to ESTABLISHED and the 'bc_peer_is_up'
state to true before we issue the local acknowledges. This ensures that
those acknowledges will always be accepted. The mentioned state values
are restored immediately afterwards when the link is reset.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11 22:42:12 -07:00
Jon Paul Maloy 2d18ac4ba7 tipc: extend broadcast link initialization criteria
At first contact between two nodes, an endpoint might sometimes have
time to send out a LINK_PROTOCOL/STATE packet before it has received
the broadcast initialization packet from the peer, i.e., before it has
received a valid broadcast packet number to add to the 'bc_ack' field
of the protocol message.

This means that the peer endpoint will receive a protocol packet with an
invalid broadcast acknowledge value of 0. Under unlucky circumstances
this may lead to the original, already received acknowledge value being
overwritten, so that the whole broadcast link goes stale after a while.

We fix this by delaying the setting of the link field 'bc_peer_is_up'
until we know that the peer really has received our own broadcast
initialization message. The latter is always sent out as the first
unicast message on a link, and always with seqeunce number 1. Because
of this, we only need to look for a non-zero unicast acknowledge value
in the arriving STATE messages, and once that is confirmed we know we
are safe and can set the mentioned field. Before this moment, we must
ignore all broadcast acknowledges from the peer.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11 22:42:12 -07:00
David S. Miller 30d0844bdc Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/mellanox/mlx5/core/en.h
	drivers/net/ethernet/mellanox/mlx5/core/en_main.c
	drivers/net/usb/r8152.c

All three conflicts were overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-06 10:35:22 -07:00
Richard Alpe 55e77a3e82 tipc: fix nl compat regression for link statistics
Fix incorrect use of nla_strlcpy() where the first NLA_HDRLEN bytes
of the link name where left out.

Making the output of tipc-config -ls look something like:
Link statistics:
dcast-link
1:data0-1.1.2:data0
1:data0-1.1.3:data0

Also, for the record, the patch that introduce this regression
claims "Sending the whole object out can cause a leak". Which isn't
very likely as this is a compat layer, where the data we are parsing
is generated by us and we know the string to be NULL terminated. But
you can of course never be to secure.

Fixes: 5d2be1422e (tipc: fix an infoleak in tipc_nl_compat_link_dump)
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01 16:47:38 -04:00
David S. Miller ee58b57100 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Several cases of overlapping changes, except the packet scheduler
conflicts which deal with the addition of the free list parameter
to qdisc_enqueue().

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 05:03:36 -04:00
Richard Alpe bc3a334cc2 tipc: rename udp_port in struct udp_media_addr
Context implies that port in struct "udp_media_addr" is referring
to a UDP port.

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29 05:17:37 -04:00
Richard Alpe e99429232e tipc: honor msg2addr return value
The UDP msg2addr function tipc_udp_msg2addr() can return -EINVAL which
prior to this patch was unhanded in the caller.

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29 05:17:37 -04:00
Amitoj Kaur Chawla 810bf11033 tipc: Use kmemdup instead of kmalloc and memcpy
Replace calls to kmalloc followed by a memcpy with a direct call to
kmemdup.

The Coccinelle semantic patch used to make this change is as follows:
@@
expression from,to,size,flag;
statement S;
@@

-  to = \(kmalloc\|kzalloc\)(size,flag);
+  to = kmemdup(from,size,flag);
   if (to==NULL || ...) S
-  memcpy(to, from, size);

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27 09:56:58 -04:00
Jon Paul Maloy 27777daa8b tipc: unclone unbundled buffers before forwarding
When extracting an individual message from a received "bundle" buffer,
we just create a clone of the base buffer, and adjust it to point into
the right position of the linearized data area of the latter. This works
well for regular message reception, but during periods of extremely high
load it may happen that an extracted buffer, e.g, a connection probe, is
reversed and forwarded through an external interface while the preceding
extracted message is still unhandled. When this happens, the header or
data area of the preceding message will be partially overwritten by a
MAC header, leading to unpredicatable consequences, such as a link
reset.

We now fix this by ensuring that the msg_reverse() function never
returns a cloned buffer, and that the returned buffer always contains
sufficient valid head and tail room to be forwarded.

Reported-by: Erik Hugne <erik.hugne@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22 16:33:35 -04:00
Jon Paul Maloy f1d048f24e tipc: fix socket timer deadlock
We sometimes observe a 'deadly embrace' type deadlock occurring
between mutually connected sockets on the same node. This happens
when the one-hour peer supervision timers happen to expire
simultaneously in both sockets.

The scenario is as follows:

CPU 1:                          CPU 2:
--------                        --------
tipc_sk_timeout(sk1)            tipc_sk_timeout(sk2)
  lock(sk1.slock)                 lock(sk2.slock)
  msg_create(probe)               msg_create(probe)
  unlock(sk1.slock)               unlock(sk2.slock)
  tipc_node_xmit_skb()            tipc_node_xmit_skb()
    tipc_node_xmit()                tipc_node_xmit()
      tipc_sk_rcv(sk2)                tipc_sk_rcv(sk1)
        lock(sk2.slock)                 lock((sk1.slock)
        filter_rcv()                    filter_rcv()
          tipc_sk_proto_rcv()             tipc_sk_proto_rcv()
            msg_create(probe_rsp)           msg_create(probe_rsp)
            tipc_sk_respond()               tipc_sk_respond()
              tipc_node_xmit_skb()            tipc_node_xmit_skb()
                tipc_node_xmit()                tipc_node_xmit()
                  tipc_sk_rcv(sk1)                tipc_sk_rcv(sk2)
                    lock((sk1.slock)                lock((sk2.slock)
                    ===> DEADLOCK                   ===> DEADLOCK

Further analysis reveals that there are three different locations in the
socket code where tipc_sk_respond() is called within the context of the
socket lock, with ensuing risk of similar deadlocks.

We now solve this by passing a buffer queue along with all upcalls where
sk_lock.slock may potentially be held. Response or rejected message
buffers are accumulated into this queue instead of being sent out
directly, and only sent once we know we are safely outside the slock
context.

Reported-by: GUNA <gbalasun@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17 21:38:10 -07:00
Dan Carpenter 0350cb48fb tipc: potential shift wrapping bug in map_set()
"up_map" is a u64 type but we're not using the high 32 bits.

Fixes: 35c55c9877 ('tipc: add neighbor monitoring framework')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17 21:26:03 -07:00
Ying Xue c91522f860 tipc: eliminate uninitialized variable warning
net/tipc/link.c: In function ‘tipc_link_timeout’:
net/tipc/link.c:744:28: warning: ‘mtyp’ may be used uninitialized in this function [-Wuninitialized]

Fixes: 42b18f605f ("tipc: refactor function tipc_link_timeout()")
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 21:47:23 -07:00
Ying Xue 66d95b6705 tipc: fix suspicious RCU usage
When run tipcTS&tipcTC test suite, the following complaint appears:

[   56.926168] ===============================
[   56.926169] [ INFO: suspicious RCU usage. ]
[   56.926171] 4.7.0-rc1+ #160 Not tainted
[   56.926173] -------------------------------
[   56.926174] net/tipc/bearer.c:408 suspicious rcu_dereference_protected() usage!
[   56.926175]
[   56.926175] other info that might help us debug this:
[   56.926175]
[   56.926177]
[   56.926177] rcu_scheduler_active = 1, debug_locks = 1
[   56.926179] 3 locks held by swapper/4/0:
[   56.926180]  #0:  (((&req->timer))){+.-...}, at: [<ffffffff810e79b5>] call_timer_fn+0x5/0x340
[   56.926203]  #1:  (&(&req->lock)->rlock){+.-...}, at: [<ffffffffa000c29b>] disc_timeout+0x1b/0xd0 [tipc]
[   56.926212]  #2:  (rcu_read_lock){......}, at: [<ffffffffa00055e0>] tipc_bearer_xmit_skb+0xb0/0x2e0 [tipc]
[   56.926218]
[   56.926218] stack backtrace:
[   56.926221] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 4.7.0-rc1+ #160
[   56.926222] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[   56.926224]  0000000000000000 ffff880016803d28 ffffffff813c4423 ffff8800154252c0
[   56.926227]  0000000000000001 ffff880016803d58 ffffffff810b7512 ffff8800124d8120
[   56.926230]  ffff880013f8a160 ffff8800132b5ccc ffff8800124d8120 ffff880016803d88
[   56.926234] Call Trace:
[   56.926235]  <IRQ>  [<ffffffff813c4423>] dump_stack+0x67/0x94
[   56.926250]  [<ffffffff810b7512>] lockdep_rcu_suspicious+0xe2/0x120
[   56.926256]  [<ffffffffa00051f1>] tipc_l2_send_msg+0x131/0x1c0 [tipc]
[   56.926261]  [<ffffffffa000567c>] tipc_bearer_xmit_skb+0x14c/0x2e0 [tipc]
[   56.926266]  [<ffffffffa00055e0>] ? tipc_bearer_xmit_skb+0xb0/0x2e0 [tipc]
[   56.926273]  [<ffffffffa000c280>] ? tipc_disc_init_msg+0x1f0/0x1f0 [tipc]
[   56.926278]  [<ffffffffa000c280>] ? tipc_disc_init_msg+0x1f0/0x1f0 [tipc]
[   56.926283]  [<ffffffffa000c2d6>] disc_timeout+0x56/0xd0 [tipc]
[   56.926288]  [<ffffffff810e7a68>] call_timer_fn+0xb8/0x340
[   56.926291]  [<ffffffff810e79b5>] ? call_timer_fn+0x5/0x340
[   56.926296]  [<ffffffffa000c280>] ? tipc_disc_init_msg+0x1f0/0x1f0 [tipc]
[   56.926300]  [<ffffffff810e8f4a>] run_timer_softirq+0x23a/0x390
[   56.926306]  [<ffffffff810f89ff>] ? clockevents_program_event+0x7f/0x130
[   56.926316]  [<ffffffff819727c3>] __do_softirq+0xc3/0x4a2
[   56.926323]  [<ffffffff8106ba5a>] irq_exit+0x8a/0xb0
[   56.926327]  [<ffffffff81972456>] smp_apic_timer_interrupt+0x46/0x60
[   56.926331]  [<ffffffff81970a49>] apic_timer_interrupt+0x89/0x90
[   56.926333]  <EOI>  [<ffffffff81027fda>] ? default_idle+0x2a/0x1a0
[   56.926340]  [<ffffffff81027fd8>] ? default_idle+0x28/0x1a0
[   56.926342]  [<ffffffff810289cf>] arch_cpu_idle+0xf/0x20
[   56.926345]  [<ffffffff810adf0f>] default_idle_call+0x2f/0x50
[   56.926347]  [<ffffffff810ae145>] cpu_startup_entry+0x215/0x3e0
[   56.926353]  [<ffffffff81040ad9>] start_secondary+0xf9/0x100

The warning appears as rtnl_dereference() is wrongly used in
tipc_l2_send_msg() under RCU read lock protection. Instead the proper
usage should be that rcu_dereference_rtnl() is called here.

Fixes: 5b7066c3dd ("tipc: stricter filtering of packets in bearer layer")
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 21:47:23 -07:00
Jon Paul Maloy 35c55c9877 tipc: add neighbor monitoring framework
TIPC based clusters are by default set up with full-mesh link
connectivity between all nodes. Those links are expected to provide
a short failure detection time, by default set to 1500 ms. Because
of this, the background load for neighbor monitoring in an N-node
cluster increases with a factor N on each node, while the overall
monitoring traffic through the network infrastructure increases at
a ~(N * (N - 1)) rate. Experience has shown that such clusters don't
scale well beyond ~100 nodes unless we significantly increase failure
discovery tolerance.

This commit introduces a framework and an algorithm that drastically
reduces this background load, while basically maintaining the original
failure detection times across the whole cluster. Using this algorithm,
background load will now grow at a rate of ~(2 * sqrt(N)) per node, and
at ~(2 * N * sqrt(N)) in traffic overhead. As an example, each node will
now have to actively monitor 38 neighbors in a 400-node cluster, instead
of as before 399.

This "Overlapping Ring Supervision Algorithm" is completely distributed
and employs no centralized or coordinated state. It goes as follows:

- Each node makes up a linearly ascending, circular list of all its N
  known neighbors, based on their TIPC node identity. This algorithm
  must be the same on all nodes.

- The node then selects the next M = sqrt(N) - 1 nodes downstream from
  itself in the list, and chooses to actively monitor those. This is
  called its "local monitoring domain".

- It creates a domain record describing the monitoring domain, and
  piggy-backs this in the data area of all neighbor monitoring messages
  (LINK_PROTOCOL/STATE) leaving that node. This means that all nodes in
  the cluster eventually (default within 400 ms) will learn about
  its monitoring domain.

- Whenever a node discovers a change in its local domain, e.g., a node
  has been added or has gone down, it creates and sends out a new
  version of its node record to inform all neighbors about the change.

- A node receiving a domain record from anybody outside its local domain
  matches this against its own list (which may not look the same), and
  chooses to not actively monitor those members of the received domain
  record that are also present in its own list. Instead, it relies on
  indications from the direct monitoring nodes if an indirectly
  monitored node has gone up or down. If a node is indicated lost, the
  receiving node temporarily activates its own direct monitoring towards
  that node in order to confirm, or not, that it is actually gone.

- Since each node is actively monitoring sqrt(N) downstream neighbors,
  each node is also actively monitored by the same number of upstream
  neighbors. This means that all non-direct monitoring nodes normally
  will receive sqrt(N) indications that a node is gone.

- A major drawback with ring monitoring is how it handles failures that
  cause massive network partitionings. If both a lost node and all its
  direct monitoring neighbors are inside the lost partition, the nodes in
  the remaining partition will never receive indications about the loss.
  To overcome this, each node also chooses to actively monitor some
  nodes outside its local domain. Those nodes are called remote domain
  "heads", and are selected in such a way that no node in the cluster
  will be more than two direct monitoring hops away. Because of this,
  each node, apart from monitoring the member of its local domain, will
  also typically monitor sqrt(N) remote head nodes.

- As an optimization, local list status, domain status and domain
  records are marked with a generation number. This saves senders from
  unnecessarily conveying  unaltered domain records, and receivers from
  performing unneeded re-adaptations of their node monitoring list, such
  as re-assigning domain heads.

- As a measure of caution we have added the possibility to disable the
  new algorithm through configuration. We do this by keeping a threshold
  value for the cluster size; a cluster that grows beyond this value
  will switch from full-mesh to ring monitoring, and vice versa when
  it shrinks below the value. This means that if the threshold is set to
  a value larger than any anticipated cluster size (default size is 32)
  the new algorithm is effectively disabled. A patch set for altering the
  threshold value and for listing the table contents will follow shortly.

- This change is fully backwards compatible.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:06:28 -07:00
David S. Miller 1578b0a5e9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	net/sched/act_police.c
	net/sched/sch_drr.c
	net/sched/sch_hfsc.c
	net/sched/sch_prio.c
	net/sched/sch_red.c
	net/sched/sch_tbf.c

In net-next the drop methods of the packet schedulers got removed, so
the bug fixes to them in 'net' are irrelevant.

A packet action unload crash fix conflicts with the addition of the
new firstuse timestamp.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10 11:52:24 -07:00
Jon Paul Maloy 5ca509fc0b tipc: change node timer unit from jiffies to ms
The node keepalive interval is recalculated at each timer expiration
to catch any changes in the link tolerance, and stored in a field in
struct tipc_node. We use jiffies as unit for the stored value.

This is suboptimal, because it makes the calculation unnecessary
complex, including two unit conversions. The conversions also lead to
a rounding error that causes the link "abort limit" to be 3 in the
normal case, instead of 4, as intended. This again leads to unnecessary
link resets when the network is pushed close to its limit, e.g., in an
environment with hundreds of nodes or namesapces.

In this commit, we do instead let the keepalive value be calculated and
stored in milliseconds, so that there is only one conversion and the
rounding error is eliminated.

We also remove a redundant "keepalive" field in struct tipc_link. This
is remnant from the previous implementation.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 11:27:02 -07:00
Jon Paul Maloy c4282ca76c tipc: correct error in node fsm
commit 88e8ac7000 ("tipc: reduce transmission rate of reset messages
when link is down") revealed a flaw in the node FSM, as defined in
the log of commit 66996b6c47 ("tipc: extend node FSM").

We see the following scenario:
1: Node B receives a RESET message from node A before its link endpoint
   is fully up, i.e., the node FSM is in state SELF_UP_PEER_COMING. This
   event will not change the node FSM state, but the (distinct) link FSM
   will move to state RESETTING.
2: As an effect of the previous event, the local endpoint on B will
   declare node A lost, and post the event SELF_DOWN to the its node
   FSM. This moves the FSM state to SELF_DOWN_PEER_LEAVING, meaning
   that no messages will be accepted from A until it receives another
   RESET message that confirms that A's endpoint has been reset. This
   is  wasteful, since we know this as a fact already from the first
   received RESET, but worse is that the link instance's FSM has not
   wasted this information, but instead moved on to state ESTABLISHING,
   meaning that it repeatedly sends out ACTIVATE messages to the reset
   peer A.
3: Node A will receive one of the ACTIVATE messages, move its link FSM
   to state ESTABLISHED, and start repeatedly sending out STATE messages
   to node B.
4: Node B will consistently drop these messages, since it can only accept
   accept a RESET according to its node FSM.
5: After four lost STATE messages node A will reset its link and start
   repeatedly sending out RESET messages to B.
6: Because of the reduced send rate for RESET messages, it is very
   likely that A will receive an ACTIVATE (which is sent out at a much
   higher frequency) before it gets the chance to send a RESET, and A
   may hence quickly move back to state ESTABLISHED and continue sending
   out STATE messages, which will again be dropped by B.
7: GOTO 5.
8: After having repeated the cycle 5-7 a number of times, node A will
   by chance get in between with sending a RESET, and the situation is
   resolved.

Unfortunately, we have seen that it may take a substantial amount of
time before this vicious loop is broken, sometimes in the order of
minutes.

We correct this by making a small correction to the node FSM: When a
node in state SELF_UP_PEER_COMING receives a SELF_DOWN event, it now
moves directly back to state SELF_DOWN_PEER_DOWN, instead of as now
SELF_DOWN_PEER_LEAVING. This is logically consistent, since we don't
need to wait for RESET confirmation from of an endpoint that we alread
know has been reset. It also means that node B in the scenario above
will not be dropping incoming STATE messages, and the link can come up
immediately.

Finally, a symmetry comparison reveals that the  FSM has a similar
error when receiving the event PEER_DOWN in state PEER_UP_SELF_COMING.
Instead of moving to PERR_DOWN_SELF_LEAVING, it should move directly
to SELF_DOWN_PEER_DOWN. Although we have never seen any negative effect
of this logical error, we choose fix this one, too.

The node FSM looks as follows after those changes:

                           +----------------------------------------+
                           |                           PEER_DOWN_EVT|
                           |                                        |
  +------------------------+----------------+                       |
  |SELF_DOWN_EVT           |                |                       |
  |                        |                |                       |
  |              +-----------+          +-----------+               |
  |              |NODE_      |          |NODE_      |               |
  |   +----------|FAILINGOVER|<---------|SYNCHING   |-----------+   |
  |   |SELF_     +-----------+ FAILOVER_+-----------+   PEER_   |   |
  |   |DOWN_EVT   |          A BEGIN_EVT  A         |   DOWN_EVT|   |
  |   |           |          |            |         |           |   |
  |   |           |          |            |         |           |   |
  |   |           |FAILOVER_ |FAILOVER_   |SYNCH_   |SYNCH_     |   |
  |   |           |END_EVT   |BEGIN_EVT   |BEGIN_EVT|END_EVT    |   |
  |   |           |          |            |         |           |   |
  |   |           |          |            |         |           |   |
  |   |           |         +--------------+        |           |   |
  |   |           +-------->|   SELF_UP_   |<-------+           |   |
  |   |   +-----------------|   PEER_UP    |----------------+   |   |
  |   |   |SELF_DOWN_EVT    +--------------+   PEER_DOWN_EVT|   |   |
  |   |   |                    A        A                   |   |   |
  |   |   |                    |        |                   |   |   |
  |   |   |         PEER_UP_EVT|        |SELF_UP_EVT        |   |   |
  |   |   |                    |        |                   |   |   |
  V   V   V                    |        |                   V   V   V
+------------+       +-----------+    +-----------+       +------------+
|SELF_DOWN_  |       |SELF_UP_   |    |PEER_UP_   |       |PEER_DOWN   |
|PEER_LEAVING|       |PEER_COMING|    |SELF_COMING|       |SELF_LEAVING|
+------------+       +-----------+    +-----------+       +------------+
       |               |       A        A       |                |
       |               |       |        |       |                |
       |       SELF_   |       |SELF_   |PEER_  |PEER_           |
       |       DOWN_EVT|       |UP_EVT  |UP_EVT |DOWN_EVT        |
       |               |       |        |       |                |
       |               |       |        |       |                |
       |               |    +--------------+    |                |
       |PEER_DOWN_EVT  +--->|  SELF_DOWN_  |<---+   SELF_DOWN_EVT|
       +------------------->|  PEER_DOWN   |<--------------------+
                            +--------------+

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 11:27:01 -07:00
Kangjie Lu 5d2be1422e tipc: fix an infoleak in tipc_nl_compat_link_dump
link_info.str is a char array of size 60. Memory after the NULL
byte is not initialized. Sending the whole object out can cause
a leak.

Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-02 21:32:37 -07:00
Baozeng Ding 297f7d2cce tipc: fix potential null pointer dereferences in some compat functions
Before calling the nla_parse_nested function, make sure the pointer to the
attribute is not null. This patch fixes several potential null pointer
dereference vulnerabilities in the tipc netlink functions.

Signed-off-by: Baozeng Ding <sploving1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-25 12:33:52 -07:00
Eric Dumazet b91083a45e tipc: block BH in TCP callbacks
TCP stack can now run from process context.

Use read_lock_bh(&sk->sk_callback_lock) variant to restore previous
assumption.

Fixes: 5413d1babe ("net: do not block BH while processing socket backlog")
Fixes: d41a69f1d3 ("tcp: make tcp_sendmsg() aware of socket backlog")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-19 11:36:49 -07:00
Linus Torvalds 16bf834805 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (21 commits)
  gitignore: fix wording
  mfd: ab8500-debugfs: fix "between" in printk
  memstick: trivial fix of spelling mistake on management
  cpupowerutils: bench: fix "average"
  treewide: Fix typos in printk
  IB/mlx4: printk fix
  pinctrl: sirf/atlas7: fix printk spelling
  serial: mctrl_gpio: Grammar s/lines GPIOs/line GPIOs/, /sets/set/
  w1: comment spelling s/minmum/minimum/
  Blackfin: comment spelling s/divsor/divisor/
  metag: Fix misspellings in comments.
  ia64: Fix misspellings in comments.
  hexagon: Fix misspellings in comments.
  tools/perf: Fix misspellings in comments.
  cris: Fix misspellings in comments.
  c6x: Fix misspellings in comments.
  blackfin: Fix misspelling of 'register' in comment.
  avr32: Fix misspelling of 'definitions' in comment.
  treewide: Fix typos in printk
  Doc: treewide : Fix typos in DocBook/filesystem.xml
  ...
2016-05-17 17:05:30 -07:00
Richard Alpe 03aaaa9b94 tipc: fix nametable publication field in nl compat
The publication field of the old netlink API should contain the
publication key and not the publication reference.

Fixes: 44a8ae94fd (tipc: convert legacy nl name table dump to nl compat)
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-17 12:34:02 -04:00
Richard Alpe 45e093ae28 tipc: check nl sock before parsing nested attributes
Make sure the socket for which the user is listing publication exists
before parsing the socket netlink attributes.

Prior to this patch a call without any socket caused a NULL pointer
dereference in tipc_nl_publ_dump().

Tested-and-reported-by: Baozeng Ding <sploving1@gmail.com>
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.cm>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16 21:58:54 -04:00
Jon Paul Maloy e7142c341c tipc: eliminate risk of double link_up events
When an ACTIVATE or data packet is received in a link in state
ESTABLISHING, the link does not immediately change state to
ESTABLISHED, but does instead return a LINK_UP event to the caller,
which will execute the state change in a different lock context.

This non-atomic approach incurs a low risk that we may have two
LINK_UP events pending simultaneously for the same link, resulting
in the final part of the setup procedure being executed twice. The
only potential harm caused by this it that we may see two LINK_UP
events issued to subsribers of the topology server, something that
may cause confusion.

This commit eliminates this risk by checking if the link is already
up before proceeding with the second half of the setup.

Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12 17:11:27 -04:00
David S. Miller cba6532100 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	net/ipv4/ip_gre.c

Minor conflicts between tunnel bug fixes in net and
ipv6 tunnel cleanups in net-next.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04 00:52:29 -04:00
Jon Paul Maloy 10724cc7bb tipc: redesign connection-level flow control
There are two flow control mechanisms in TIPC; one at link level that
handles network congestion, burst control, and retransmission, and one
at connection level which' only remaining task is to prevent overflow
in the receiving socket buffer. In TIPC, the latter task has to be
solved end-to-end because messages can not be thrown away once they
have been accepted and delivered upwards from the link layer, i.e, we
can never permit the receive buffer to overflow.

Currently, this algorithm is message based. A counter in the receiving
socket keeps track of number of consumed messages, and sends a dedicated
acknowledge message back to the sender for each 256 consumed message.
A counter at the sending end keeps track of the sent, not yet
acknowledged messages, and blocks the sender if this number ever reaches
512 unacknowledged messages. When the missing acknowledge arrives, the
socket is then woken up for renewed transmission. This works well for
keeping the message flow running, as it almost never happens that a
sender socket is blocked this way.

A problem with the current mechanism is that it potentially is very
memory consuming. Since we don't distinguish between small and large
messages, we have to dimension the socket receive buffer according
to a worst-case of both. I.e., the window size must be chosen large
enough to sustain a reasonable throughput even for the smallest
messages, while we must still consider a scenario where all messages
are of maximum size. Hence, the current fix window size of 512 messages
and a maximum message size of 66k results in a receive buffer of 66 MB
when truesize(66k) = 131k is taken into account. It is possible to do
much better.

This commit introduces an algorithm where we instead use 1024-byte
blocks as base unit. This unit, always rounded upwards from the
actual message size, is used when we advertise windows as well as when
we count and acknowledge transmitted data. The advertised window is
based on the configured receive buffer size in such a way that even
the worst-case truesize/msgsize ratio always is covered. Since the
smallest possible message size (from a flow control viewpoint) now is
1024 bytes, we can safely assume this ratio to be less than four, which
is the value we are now using.

This way, we have been able to reduce the default receive buffer size
from 66 MB to 2 MB with maintained performance.

In order to keep this solution backwards compatible, we introduce a
new capability bit in the discovery protocol, and use this throughout
the message sending/reception path to always select the right unit.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03 15:51:16 -04:00
Jon Paul Maloy 60020e1857 tipc: propagate peer node capabilities to socket layer
During neighbor discovery, nodes advertise their capabilities as a bit
map in a dedicated 16-bit field in the discovery message header. This
bit map has so far only be stored in the node structure on the peer
nodes, but we now see the need to keep a copy even in the socket
structure.

This commit adds this functionality.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03 15:51:15 -04:00
Jon Paul Maloy 7c8bcfb125 tipc: re-enable compensation for socket receive buffer double counting
In the refactoring commit d570d86497 ("tipc: enqueue arrived buffers
in socket in separate function") we did by accident replace the test

if (sk->sk_backlog.len == 0)
     atomic_set(&tsk->dupl_rcvcnt, 0);

with

if (sk->sk_backlog.len)
     atomic_set(&tsk->dupl_rcvcnt, 0);

This effectively disables the compensation we have for the double
receive buffer accounting that occurs temporarily when buffers are
moved from the backlog to the socket receive queue. Until now, this
has gone unnoticed because of the large receive buffer limits we are
applying, but becomes indispensable when we reduce this buffer limit
later in this series.

We now fix this by inverting the mentioned condition.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03 15:51:14 -04:00
Hamish Martin efe790502b tipc: only process unicast on intended node
We have observed complete lock up of broadcast-link transmission due to
unacknowledged packets never being removed from the 'transmq' queue. This
is traced to nodes having their ack field set beyond the sequence number
of packets that have actually been transmitted to them.
Consider an example where node 1 has sent 10 packets to node 2 on a
link and node 3 has sent 20 packets to node 2 on another link. We
see examples of an ack from node 2 destined for node 3 being treated as
an ack from node 2 at node 1. This leads to the ack on the node 1 to node
2 link being increased to 20 even though we have only sent 10 packets.
When node 1 does get around to sending further packets, none of the
packets with sequence numbers less than 21 are actually removed from the
transmq.
To resolve this we reinstate some code lost in commit d999297c3d ("tipc:
reduce locking scope during packet reception") which ensures that only
messages destined for the receiving node are processed by that node. This
prevents the sequence numbers from getting out of sync and resolves the
packet leakage, thereby resolving the broadcast-link transmission
lock-ups we observed.

While we are aware that this change only patches over a root problem that
we still haven't identified, this is a sanity test that it is always
legitimate to do. It will remain in the code even after we identify and
fix the real problem.

Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: John Thompson <john.thompson@alliedtelesis.co.nz>
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-01 21:03:30 -04:00
Jon Paul Maloy def22c47d7 tipc: set 'active' state correctly for first established link
When we are displaying statistics for the first link established between
two peers, it will always be presented as STANDBY although it in reality
is ACTIVE.

This happens because we forget to set the 'active' flag in the link
instance at the moment it is established. Although this is a bug, it only
has impact on the presentation view of the link, not on its actual
functionality.

Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-01 19:40:22 -04:00
Dan Carpenter b43586576e tipc: remove an unnecessary NULL check
This is never called with a NULL "buf" and anyway, we dereference 's' on
the lines before so it would Oops before we reach the check.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-28 16:54:12 -04:00
Parthasarathy Bhuvaragan 8cee83dd29 tipc: fix stale links after re-enabling bearer
Commit 42b18f605f ("tipc: refactor function tipc_link_timeout()"),
introduced a bug which prevents sending of probe messages during
link synchronization phase. This leads to hanging links, if the
bearer is disabled/enabled after links are up.

In this commit, we send the probe messages correctly.

Fixes: 42b18f605f ("tipc: refactor function tipc_link_timeout()")
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24 14:35:07 -04:00
David S. Miller 1602f49b58 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts were two cases of simple overlapping changes,
nothing serious.

In the UDP case, we need to add a hlist_add_tail_rcu()
to linux/rculist.h, because we've moved UDP socket handling
away from using nulls lists.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-23 18:51:33 -04:00
Masanari Iida c19ca6cb4c treewide: Fix typos in printk
This patch fix spelling typos found in printk
within various part of the kernel sources.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-04-18 11:23:24 +02:00
Jon Paul Maloy 34b9cd64c8 tipc: let first message on link be a state message
According to the link FSM, a received traffic packet can take a link
from state ESTABLISHING to ESTABLISHED, but the link can still not be
fully set up in one atomic operation. This means that even if the the
very first packet on the link is a traffic packet with sequence number
1 (one), it has to be dropped and retransmitted.

This can be avoided if we let the mentioned packet be preceded by a
LINK_PROTOCOL/STATE message, which takes up the endpoint before the
arrival of the traffic.

We add this small feature in this commit.

This is a fully compatible change.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-15 16:09:06 -04:00
Jon Paul Maloy de7e07f9ee tipc: ensure that first packets on link are sent in order
In some link establishment scenarios we see that packet #2 may be sent
out before packet #1, forcing the receiver to demand retransmission of
the missing packet. This is harmless, but may cause confusion among
people tracing the packet flow.

Since this is extremely easy to fix, we do so by adding en extra send
call to the bearer immediately after the link has come up.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-15 16:09:06 -04:00
Jon Paul Maloy 42b18f605f tipc: refactor function tipc_link_timeout()
The function tipc_link_timeout() is unnecessary complex, and can
easily be made more readable.

We do that with this commit. The only functional change is that we
remove a redundant test for whether the broadcast link is up or not.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-15 16:09:06 -04:00