Use the new defines for external interruption codes to get rid
of "magic" numbers in the s390 source code. And while we're at it,
also rename the (un-)register_external_interrupt function to
something shorter so that this patch does not exceed the 80
columns all over the place.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This patch adds a timeout option for queued requests and introduces
sclp_sync_request_timeout() to use this timer. With this, blocking the
system too long, e.g. during an SE reboot, can be avoided in critical
situations like CPU and memory hotplug.
Since there is no way to cancel a running request, this timeout only
applies to queued requests that have not yet been started.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Otherwise we leak a tracking object when DEBUG_OBJECTS is enabled.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
del_timer() does not wait for a possible running callback to
complete. So the call side might free request and the associated
objects while on another cpu the timer handler runs.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
If the 3270 device is detached the initial reset device request will
stays pending until the device is operational. A second reset device
call will reuse the same request structure which will cause an oops.
Add a check to see if the reset device request is already pending
and do nothing in this case.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This patch adds a parameter 'auto_update' to the con3270
driver, causing the 'auto_update' feature to be disabled
if unset.
The 'auto_update' feature will cause the con3270 driver
to switch to the console view whenever new system messages
are displayed, which makes working on the 3270 terminal
awkward.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Limit the number of bits to the maximum number of cpus a machine
can have.
possible_cpu_mask typically will have more bits set than a machine
may physically have. This results in wasted memory during per-cpu
memory allocations, if the possible mask contains more cpus than
physically possible for a given configuration.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Currently we return a negative block count if SCLP returns HSA block
count zero. The reason is that we subtract one for the header page.
So fix this and correctly return zero block count if SCLP returns zero.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Drivers for ccw consoles use ccw_device_probe_console to receive
an initialized ccw device which is already enabled for interrupts.
After that the device driver does the initialization of its private
data. This can race with unsolicited interrupts which can happen
once the device is enabled for interrupts.
Split ccw_device_probe_console into ccw_device_create_console and
ccw_device_enable_console and reorder the initialization of the ccw
console drivers.
While at it mark these functions as __init.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
ccw consoles are in use before they can be properly registered with
the driver core. For devices which are in use by a device driver we
rely on the ccw_device's pointer to the driver callbacks to be valid.
For ccw consoles this pointer is NULL until they are registered later
during boot and we dereferenced this pointer. This worked by
chance on 64 bit builds (cdev->drv was NULL but the optional callback
cdev->drv->path_event was also NULL by coincidence) and was unnoticed
until we received reports about boot failures on 31 bit systems.
Fix it by initializing the driver pointer for ccw consoles.
Cc: <stable@vger.kernel.org> # 3.10+
Reported-by: Mike Frysinger <vapier@gentoo.org>
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
To provide access to the set-partition-resource-parameter interface
to user space add a new attribute to hypfs/debugfs:
* s390_hypsfs/diag_304
The data for the query-partition-resource-parameters command can
be access by a read on the attribute. All other diagnose 0x304
requests need to be submitted via ioctl with CAP_SYS_ADMIN rights.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When creating the virtual unit record (UR) device, specify the parent
CCW device.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pull s390 updates from Martin Schwidefsky:
"The bulk of the s390 updates for v3.14.
New features are the perf support for the CPU-Measurement Sample
Facility and the EP11 support for the crypto cards. And the normal
cleanups and bug-fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (44 commits)
s390/cpum_sf: fix printk format warnings
s390: Fix misspellings using 'codespell' tool
s390/qdio: bridgeport support - CHSC part
s390: delete new instances of __cpuinit usage
s390/compat: fix PSW32_USER_BITS definition
s390/zcrypt: add support for EP11 coprocessor cards
s390/mm: optimize randomize_et_dyn for !PF_RANDOMIZE
s390: use IS_ENABLED to check if a CONFIG is set to y or m
s390/cio: use device_lock to synchronize calls to the ccwgroup driver
s390/cio: use device_lock to synchronize calls to the ccw driver
s390/cio: fix unlocked access of online member
s390/cpum_sf: Add flag to process full SDBs only
s390/cpum_sf: Add raw data sampling to support the diagnostic-sampling function
s390/cpum_sf: Filter perf events based event->attr.exclude_* settings
s390/cpum_sf: Detect KVM guest samples
s390/cpum_sf: Add helper to read TOD from trailer entries
s390/cpum_sf: Atomically reset trailer entry fields of sample-data-blocks
s390/cpum_sf: Dynamically extend the sampling buffer if overflows occur
s390/pci: reenable per default
s390/pci/dma: fix accounting of allocated_pages
...
The tty3270_alloc_screen function is called from tty3270_install with
swapped arguments, the number of columns instead of rows and vice versa.
The number of rows is typically smaller than the number of columns which
makes the screen array too big but the individual cell arrays for the
lines too small. Creating lines longer than the number of rows will
clobber the memory after the end of the cell array.
The fix is simple, call tty3270_alloc_screen with the correct argument
order.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add SCLP console detect functions to encapsulate detection of SCLP console
capabilities, for example, VT220 support. Reuse the sclp_send/receive masks
that were stored by the most recent sclp_set_event_mask() call to prevent
unnecessary SCLP calls.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add a sccb pointer parameter to *_detect() functions instead of accessing
the global sccb_early variable directly.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Replace early_read_info_sccb and use sccb_early instead.
Also saves some memory.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The early sclp detect functions gather the available SCLP facility
information. The sclp_early_read_info_sccb_valid indicates whether the
early sclp request was valid. However, one external reference to it
checks for particular sclp facility bits and this should be sufficient.
Another occurance is in the sclp_get_ipl_info() function that is called
later. Because all information are available at the early stage, save
the ipl information when detecting the sclp facilities. Hence, no more
checks for sclp_early_read_info_sccb_valid are required.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The deactivation and freeing of the tty view of the 3270 device
can race with a tty3270_update invocation via the update timer.
To fix this move the del_timer_sync call for the update timer from
tty3270_free_view to tty3270_free prior to the tty3270_free_screen
call.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Commit "s390/sclp: Consolidate early sclp init calls to sclp_early_detect()"
(7b50da53f6) replaced the sclp_event_mask_early()
with sclp_set_event_mask(). The early_event_mask_sccb variable is no longer
initialized but is still used in sclp_has_linemode() and sclp_has_vt220().
Replace early_event_mask_sccb with the sccb_early variable in both
functions.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The new function calls the old ones. The sclp_event_mask_early() is removed
and replaced by one invocation of sclp_set_event_mask(0, 0).
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The early SCLP driver code in sclp_cmd.c belongs to sclp_early.c
because it is independent from the 'normal' SCLP driver. So move
it to sclp_early.c
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Currently we have hardcoded the HSA size to 32 MiB. With this patch the
HSA size is determined dynamically via SCLP in early.c.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Unloading the fs3270 kernel module does not remove the created
"3270/tub" device. Reloading the module then causes a sysfs warning:
"sysfs: cannot create duplicate filename '/devices/virtual/3270/3270!tub'".
Call device_destroy() in the module exit function to solve this issue.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
There is a debugging leftover from git commit 4d334fd155
"s390/3270: asynchronous size sensing" in raw3270_reset_device_cb.
Under z/VM the diagnose 0x210 can be used to find the correct
size of the 3270 terminal.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Make smatch happy and remove this warning:
drivers/s390/char/raw3270.c:347 raw3270_irq() error: we previously
assumed 'rq' could be null (see line 342)
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This patch fixes the following smatch warning:
monwrite_diag() error: strcpy() '"LNXAPPL"' too large for 'id.prod_nr'
(8 vs 7)
Using strcpy() is wrong, because it also copies the terminating null
byte, but in this case the extra copied null byte will be overwritten
right after the strcpy(), so there is no real problem here.
Use strncpy() to fix the warning.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Currently zfpcdump can only collect registers for up to CONFIG_NR_CPUS
CPUss. This dependency is not necessary. So remove it by dynamically
allocating the save area array.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The result of the store-clock-fast (STCKF) instruction is a bit fuzzy.
It can happen that the value stored on one CPU is smaller than the value
stored on another CPU, although the order of the stores is the other
way around. This can cause deltas of get_tod_clock() values to become
negative when they should not be.
We need to be more careful with store-clock-fast, this patch partially
reverts git commit e4b7b4238e666682555461fa52eecd74652f36bb "time:
always use stckf instead of stck if available". The get_tod_clock()
function now uses the store-clock-extended (STCKE) instruction.
get_tod_clock_fast() can be used if the fuzziness of store-clock-fast
is acceptable e.g. for wait loops local to a CPU.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fix check within vmlogrdr_open() if the minor address is not larger
than the number of array elements.
Found with "smatch":
drivers/s390/char/vmlogrdr.c:318 vmlogrdr_open() warn:
buffer overflow 'sys_ser' 3 <= 3
Acked-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
To detect a line mode console we need a message event type
for the receive mask and a command event type for the send mask.
Checking for a MSG event in the sclp send mask was wrong and
might result in line mode consoles not being detected.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In case of error, the function tty3270_alloc_screen() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Modify the s390 copy_oldmem_page() and remap_oldmem_pfn_range() function
for zfcpdump to read from the HSA memory if memory below HSA_SIZE bytes is
requested. Otherwise real memory is used.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Willeke <willeke@de.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make various functions static, add declarations to header files to
fix a couple of sparse findings.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Let's not add a function for every external interrupt subclass for
which we need reference counting. Just have two register/unregister
functions which have a subclass parameter:
void irq_subclass_register(enum irq_subclass subclass);
void irq_subclass_unregister(enum irq_subclass subclass);
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Change wording for the cpu capabiity changed message:
If such an event occurs it only means that a cpu capability *may* have
changed. A cpu capability change event may also occur for other reasons.
Also change the severity of the message from warning to informational.
If such an event happens user space should into /proc/sysinfo and verify
if some capability values changed, if that is of interest.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pull trivial tree updates from Jiri Kosina:
"The usual stuff from trivial tree"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
treewide: relase -> release
Documentation/cgroups/memory.txt: fix stat file documentation
sysctl/net.txt: delete reference to obsolete 2.4.x kernel
spinlock_api_smp.h: fix preprocessor comments
treewide: Fix typo in printk
doc: device tree: clarify stuff in usage-model.txt.
open firmware: "/aliasas" -> "/aliases"
md: bcache: Fixed a typo with the word 'arithmetic'
irq/generic-chip: fix a few kernel-doc entries
frv: Convert use of typedef ctl_table to struct ctl_table
sgi: xpc: Convert use of typedef ctl_table to struct ctl_table
doc: clk: Fix incorrect wording
Documentation/arm/IXP4xx fix a typo
Documentation/networking/ieee802154 fix a typo
Documentation/DocBook/media/v4l fix a typo
Documentation/video4linux/si476x.txt fix a typo
Documentation/virtual/kvm/api.txt fix a typo
Documentation/early-userspace/README fix a typo
Documentation/video4linux/soc-camera.txt fix a typo
lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment
...
Using static data for fields which are accessed by HW will fail if
the driver is build as a module (since this would be vmalloc'ed
memory). This Bug was revealed via
"s390: remove virt_to_phys implementation" - the old virt_to_phys
implementation would have translated the address but it was not
guaranteed that the memory was contiguous.
Fix it by putting the data on the stack.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add a character misc device "sclp_ctl" that allows to run SCCBs
from user space using the SCLP_CTL_SCCB ioctl.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add a kernel parameter to be able to specify the number of pages to be
used as output buffer by the line-mode sclp driver and the vt220 sclp
driver. The current number of output pages is 6, if the service element
is unavailable the boot messages alone can fill up the output buffer.
If this happens the system blocks until the service element is working
again. For a large LPAR with many devices it is sensible to have the
ability to increase the output buffer size. To help to debug this
situation add a counter for the page-pool-empty situation and make it
available as a sclp driver attribute.
To avoid the system to stall until the service element works again
add another kernel parameter to allow to drop output buffers.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Given that the memory block size is always larger or equal to
the memory increment size there is no need for a usecount anymore.
Each memory increment belongs to exactly one memory block.
So get rid of the usecount.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The current memory detection loop will detect all present memory of
a machine. This is true even if the user specified the "mem=" parameter
on the kernel command line.
This can be a problem since the memory detection may cause a fully
populated host page table for the guest, even for those parts of the
memory that the guest will never use afterwards.
So fix this and only detect memory up to a user supplied "mem=" limit
if specified.
Reported-by: Michael Johanssen <johanssn@de.ibm.com>
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The zcore device driver makes use of the global visible real_memory_size
variable with its odd semantics.
Since the zcore device driver already has code in place which calculates
the memory size at module load time, use that code to calculate the current
memory end value.
One user less of the odd real_memory_size variable.
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Here's the big tty/serial driver merge request for 3.10-rc1
Once again, Jiri has a number of TTY driver fixes and cleanups, and
Peter Hurley came through with a bunch of ldisc fixes that resolve a
number of reported issues. There are some other serial driver cleanups
as well.
All of these have been in the linux-next tree for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlF+nSMACgkQMUfUDdst+ymy9QCfRmYn0MC0W+Q1D3Spz87gVsuo
cqEAniu1BEkYZpjAz7ZlIN07Ao0jbQOR
=Osu/
-----END PGP SIGNATURE-----
Merge tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver update from Greg Kroah-Hartman:
"Here's the big tty/serial driver merge request for 3.10-rc1
Once again, Jiri has a number of TTY driver fixes and cleanups, and
Peter Hurley came through with a bunch of ldisc fixes that resolve a
number of reported issues. There are some other serial driver
cleanups as well.
All of these have been in the linux-next tree for a while"
* tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (117 commits)
tty/serial/sirf: fix MODULE_DEVICE_TABLE
serial: mxs: drop superfluous {get|put}_device
serial: mxs: fix buffer overflow
ARM: PL011: add support for extended FIFO-size of PL011-r1p5
serial_core.c: add put_device() after device_find_child()
tty: Fix unsafe bit ops in tty_throttle_safe/unthrottle_safe
serial: sccnxp: Replace pdata.init/exit with regulator API
serial: sccnxp: Do not override device name
TTY: pty, fix compilation warning
TTY: rocket, fix compilation warning
TTY: ircomm: fix DTR being raised on hang up
TTY: synclinkmp: fix DTR being raised on hang up
TTY: synclink_gt: fix DTR being raised on hang up
TTY: synclink: fix DTR being raised on hang up
serial: 8250_dw: Fix the stub for dw8250_probe_acpi()
serial: 8250_dw: Convert to devm_ioremap()
serial: 8250_dw: Set port capabilities based on CPR register
serial: 8250_dw: Let ACPI code extract the DMA client info
serial: 8250_dw: Support clk framework also with ACPI
serial: 8250_dw: Enable runtime PM
...
In case a machine supports memory hotplug all active memory increments
present at IPL time have been initialized with a "usecount" of 1.
This is wrong if the memory increment size is larger than the memory
section size of the memory hotplug code. If that is the case the
usecount must be initialized with the number of memory sections that
fit into one memory increment.
Otherwise it is possible to put a memory increment into standby state
even if there are still active sections.
Afterwards addressing exceptions might happen which cause the kernel
to panic.
However even worse, if a memory increment was put into standby state
and afterwards into active state again, it's contents would have been
zeroed, leading to memory corruption.
This was only an issue for machines that support standby memory and
have at least 256GB memory.
This is broken since commit fdb1bb15 "[S390] sclp/memory hotplug: fix
initial usecount of increments".
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: stable@vger.kernel.org # 2.6.39+
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Currently always one page is copied to a user buffer for the last
HSA block in memcpy_hsa(). Now the correct length is used.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Thomas Huth