Unpreparing and re-preparing a panel can be a really heavy
operation. Panels datasheets often specify something on the order of
500ms as the delay you should insert after turning off the panel
before turning it on again. In addition, turning on a panel can have
delays on the order of 100ms - 200ms before the panel will assert HPD
(AKA "panel ready"). The above means that we should avoid turning a
panel off if we're going to turn it on again shortly.
The above becomes a problem when we want to read the EDID of a
panel. The way that ordering works is that userspace wants to read the
EDID of the panel _before_ fully enabling it so that it can set the
initial mode correctly. However, we can't read the EDID until we power
it up. This leads to code that does this dance (like
ps8640_bridge_get_edid()):
1. When userspace requests EDID / the panel modes (through an ioctl),
we power on the panel just enough to read the EDID and then power
it off.
2. Userspace then turns the panel on.
There's likely not much time between step #1 and #2 and so we want to
avoid powering the panel off and on again between those two steps.
Let's use Runtime PM to help us. We'll move the existing prepare() and
unprepare() to be runtime resume() and runtime suspend(). Now when we
want to prepare() or unprepare() we just increment or decrement the
refcount. We'll default to a 1 second autosuspend delay which seems
sane given the typical delays we see for panels.
A few notes:
- It seems the existing unprepare() and prepare() are defined to be
no-ops if called extra times. We'll preserve that behavior but may
try to remove it in a future patch.
- This is a slight change in the ABI of simple panel. If something was
absolutely relying on the unprepare() to happen instantly that
simply won't be the case anymore. I'm not aware of anyone relying on
that behavior, but if there is someone then we'll need to figure out
how to enable (or disable) this new delayed behavior selectively.
- In order for this to work we now have a hard dependency on
"PM". From memory this is a legit thing to assume these days and we
don't have to find some fallback to keep working if someone wants to
build their system without "PM".
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.7.I9e8bd33b49c496745bfac58ea9ab418bd3b6f5ce@changeid
Let's make the remove() function strictly the reverse of the probe()
function so it's easier to reason about.
This patch was created by code inspection and should move us closer to
a proper remove.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.4.Ifcf1deaa372eba7eeb4f8eb516c5d15b77a657a9@changeid
The clock framework makes it simple to deal with an optional clock.
You can call clk_get_optional() and if the clock isn't specified it'll
just return NULL without complaint. It's valid to pass NULL to
enable/disable/prepare/unprepare. Let's make use of this to simplify
things a tiny bit.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.2.Ic9c04f960190faad5290738b2a35d73661862735@changeid
The drm_bridge_chain_pre_enable() is not the proper opposite of
drm_bridge_chain_post_disable(). It continues along the chain to
_before_ the starting bridge. Let's fix that.
Fixes: 05193dc381 ("drm/bridge: Make the bridge chain a double-linked list")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.1.If62a003f76a2bc4ccc6c53565becc05d2aad4430@changeid
On the Amlogic SoCs, the DW-HDMI HW support is here but the DW-HDMI CEC signal
is not connected to a physical pin, leading to confusion when the dw-hdmi cec
controller can't communicate on the bus.
Disable it to avoid exposing a non-functinal bus.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416092737.1971876-3-narmstrong@baylibre.com
This adds DW-HDMI driver a glue option to disable loading of the CEC sub-driver.
On some SoCs, the CEC functionality is enabled in the IP config bits, but the
CEC bus is non-functional like on Amlogic SoCs, where the CEC config bit is set
but the DW-HDMI CEC signal is not connected to a physical pin, leading to some
confusion when the DW-HDMI CEC controller can't communicate on the bus.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416092737.1971876-2-narmstrong@baylibre.com
Added a "break" in the default case of a switch select statement.
GCC complains, although this "break" is not strictly necessary
for the code to work as expected.
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210417161552.6571-1-fmdefrancesco@gmail.com
Since
commit 890880ddfd
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-3-daniel.vetter@ffwll.ch
The DRM_SIL_SII8620 kconfig has a weak `imply` dependency
on EXTCON, which causes issues when sii8620 is built
as a builtin and EXTCON is built as a module.
The symptoms are 'undefined reference' errors caused
by the symbols in EXTCON not being available
to the sii8620 driver.
Fixes: 6888384421 ("drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419090124.153560-1-robert.foss@linaro.org
A static analysis shows several issues in the driver code at
probing time.
DT parsing errors were bad handled and could lead to bugs:
- Bad error detection;
- Bad release of resources
Fixes: 30e2ae943c ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210415183639.1487-1-rdunlap@infradead.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Since
commit 890880ddfd
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here for both dcss and
imx-drm drivers.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-5-daniel.vetter@ffwll.ch
Since
commit 890880ddfd
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-11-daniel.vetter@ffwll.ch
Since
commit 890880ddfd
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.
It was slightly inconsistently though, since planes with only linear
modifier support haven't listed that explicitly. Fix that, and cc:
stable to allow userspace to rely on this. Again don't backport
further than where Paul's patch got added.
Cc: stable@vger.kernel.org # v5.1 +
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-10-daniel.vetter@ffwll.ch
If support for Blob resources is available, then dumb BOs created
by the driver can be considered as guest Blobs.
v2: Don't skip transfer and flush commands as part of plane update
as the device may have created a shared mapping. (Gerd)
v3: Don't create dumb BOs as Guest blobs if Virgl is enabled. (Gurchetan)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Acked-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20210413052614.2486768-1-vivek.kasireddy@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fbdev's helpers for handling conflicting framebuffer drivers are
related to framebuffer apertures, not console emulation. Therefore
remove them from drm_fb_helper.h and inline them into the aperture
helpers. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-4-tzimmermann@suse.de
Platform devices might operate on firmware framebuffers, such as VESA
or EFI. Before a native driver for the graphics hardware can take over
the device, it has to remove any platform driver that operates on the
firmware framebuffer. Aperture helpers provide the infrastructure for
native drivers to remove the generic ones.
For now, this only concerns generic fbdev drivers. Code for removing
these is provided by drm_fb_helper_remove_conflicting_framebuffers() et
al. Simply wrap these functions for now. At a later point, code can be
added for generic DRM drivers to acquire firmware framebuffers.
v2:
* fix docs for drm_aperture_remove_framebuffers()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-2-tzimmermann@suse.de
msm-next from Rob:
* Big DSI phy/pll cleanup. Includes some clk patches, acked by
maintainer
* Initial support for sc7280
* compatibles fixes for sm8150/sm8250
* cleanups for all dpu gens to use same bandwidth scaling paths (\o/)
* various shrinker path lock contention optimizations
* unpin/swap support for GEM objects (disabled by default, enable with
msm.enable_eviction=1 .. due to various combinations of iommu drivers
with older gens I want to get more testing on hw I don't have in front
of me before enabling by default)
* The usual assortment of misc fixes and cleanups
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvL=4aw15qoY8fbKG9FCgnx8Y-dCtf7xiFwTQSHopwSQg@mail.gmail.com
msm-next pull request has a baseline with stuff from -fixes, roll
forward first.
Some simple conflicts in amdgpu, ttm and one in i915 where git gets
confused and tries to add the same function twice.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-----BEGIN PGP SIGNATURE-----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=MuRt
-----END PGP SIGNATURE-----
Merge tag 'for-5.12-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more patch that we'd like to get to 5.12 before release.
It's changing where and how the superblock is stored in the zoned
mode. It is an on-disk format change but so far there are no
implications for users as the proper mkfs support hasn't been merged
and is waiting for the kernel side to settle.
Until now, the superblocks were derived from the zone index, but zone
size can differ per device. This is changed to be based on fixed
offset values, to make it independent of the device zone size.
The work on that got a bit delayed, we discussed the exact locations
to support potential device sizes and usecases. (Partially delayed
also due to my vacation.) Having that in the same release where the
zoned mode is declared usable is highly desired, there are userspace
projects that need to be updated to recognize the feature. Pushing
that to the next release would make things harder to test"
* tag 'for-5.12-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: move superblock logging zone location
ambiguous/confusing kernel log message.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=y7/k
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2021-04-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixlets from Ingo Molnar:
"Two minor fixes: one for a Clang warning, the other improves an
ambiguous/confusing kernel log message"
* tag 'locking-urgent-2021-04-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Address clang -Wformat warning printing for %hd
lockdep: Add a missing initialization hint to the "INFO: Trying to register non-static key" message
again.
- A fix for the CE collector to return the proper return values to its
callers which are used to convey what the collector has done with the
error address.
-----BEGIN PGP SIGNATURE-----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=aV+H
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix the vDSO exception handling return path to disable interrupts
again.
- A fix for the CE collector to return the proper return values to its
callers which are used to convey what the collector has done with the
error address.
* tag 'x86_urgent_for_v5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/traps: Correct exc_general_protection() and math_error() return paths
RAS/CEC: Correct ce_add_elem()'s returned values
Pull percpu fix from Dennis Zhou:
"This contains a fix for sporadically failing atomic percpu
allocations.
I only caught it recently while I was reviewing a new series [1] and
simultaneously saw reports by btrfs in xfstests [2] and [3].
In v5.9, memcg accounting was extended to percpu done by adding a
second type of chunk. I missed an interaction with the free page float
count used to ensure we can support atomic allocations. If one type of
chunk has no free pages, but the other has enough to satisfy the free
page float requirement, we will not repopulate the free pages for the
former type of chunk. This led to the sporadically failing atomic
allocations"
Link: https://lore.kernel.org/linux-mm/20210324190626.564297-1-guro@fb.com/ [1]
Link: https://lore.kernel.org/linux-mm/20210401185158.3275.409509F4@e16-tech.com/ [2]
Link: https://lore.kernel.org/linux-mm/CAL3q7H5RNBjCi708GH7jnczAOe0BLnacT9C+OBgA-Dx9jhB6SQ@mail.gmail.com/ [3]
* 'for-5.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: make pcpu_nr_empty_pop_pages per chunk type
Seven fixes all in drivers. The hpsa three are the most extensive and
the most problematic: it's a packed structure misalignment that oopses
on ia64 but looks like it would also oops on quite a few non-x86
architectures. The pm80xx is a regression and the rest are bug fixes
for patches in the misc tree.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYHHkmSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishY4jAQCkSkE5
KBpRtx/62/7CxiUDzY5O0+XPHPzz8E/fuvQ0VwD9GC9C68M7Brij+JJYLV6OofcY
weRtt2h6JSJ+1ncWdno=
=ys05
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Seven fixes, all in drivers.
The hpsa three are the most extensive and the most problematic: it's a
packed structure misalignment that oopses on ia64 but looks like it
would also oops on quite a few non-x86 architectures.
The pm80xx is a regression and the rest are bug fixes for patches in
the misc tree"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_transport_srp: Don't block target in SRP_PORT_LOST state
scsi: target: iscsi: Fix zero tag inside a trace event
scsi: pm80xx: Fix chip initialization failure
scsi: ufs: core: Fix wrong Task Tag used in task management request UPIUs
scsi: ufs: core: Fix task management request completion timeout
scsi: hpsa: Add an assert to prevent __packed reintroduction
scsi: hpsa: Fix boot on ia64 (atomic_t alignment)
scsi: hpsa: Use __packed on individual structs, not header-wide
Fix an oops triggered by ptrace when CONFIG_PPC_FPU_REGS=n.
Fix an oops on sigreturn when the VDSO is unmapped on 32-bit.
Fix vdso_wrapper.o not being rebuilt everytime vdso.so is rebuilt.
Thanks to Christophe Leroy.
-----BEGIN PGP SIGNATURE-----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=gIsc
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.12-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some some more powerpc fixes for 5.12:
- Fix an oops triggered by ptrace when CONFIG_PPC_FPU_REGS=n
- Fix an oops on sigreturn when the VDSO is unmapped on 32-bit
- Fix vdso_wrapper.o not being rebuilt everytime vdso.so is rebuilt
Thanks to Christophe Leroy"
* tag 'powerpc-5.12-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vdso: Make sure vdso_wrapper.o is rebuilt everytime vdso.so is rebuilt
powerpc/signal32: Fix Oops on sigreturn with unmapped VDSO
powerpc/ptrace: Don't return error when getting/setting FP regs without CONFIG_PPC_FPU_REGS
Douglas Anderson