Serial port is attached to XTFPGA boards as native endian device, now
that earlycon parameter parser understands mmio32native put it into
earlycon kernel parameter. This makes early console functional on both
little- and big-endian CPUs with identical kernel command lines.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
I2C controller is attached to XTFPGA boards as native endian device, mark
it as such in DTS.
Set register width in DTS to 4, this way it works both for little- and
big-endian CPUs.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Ethernet controller is attached to XTFPGA boards as native endian device,
mark it as such in DTS and pass correct endianness in platform data.
This makes network functional on big-endian CPUs.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Serial port is attached to XTFPGA boards as native endian device, mark
it as such in DTS and pass correct endianness in platform data.
Set register width in DTS to 4, this way it matches the platform data
and works correctly on big-endian CPUs.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- fix remaining issues with noMMU cores;
- fix build for cores w/o cache or zero overhead loop options;
- fix boot of secondary cores in SMP configuration;
- add support for DMA to high memory pages;
- add dma_to_phys and phys_to_dma functions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=iNoG
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20151108' of git://github.com/czankel/xtensa-linux
Pull xtensa updates from Chris Zankel:
- fix remaining issues with noMMU cores
- fix build for cores w/o cache or zero overhead loop options
- fix boot of secondary cores in SMP configuration
- add support for DMA to high memory pages
- add dma_to_phys and phys_to_dma functions.
* tag 'xtensa-20151108' of git://github.com/czankel/xtensa-linux:
xtensa: implement dma_to_phys and phys_to_dma
xtensa: support DMA to high memory
Revert "xtensa: cache inquiry and unaligned cache handling functions"
xtensa: drop unused sections and remapped reset handlers
xtensa: fix secondary core boot in SMP
xtensa: add FORCE_MAX_ZONEORDER to Kconfig
xtensa: nommu: provide defconfig for de212 on kc705
xtensa: nommu: xtfpga: add kc705 DTS
xtensa: add de212 core variant
xtensa: nommu: select HAVE_FUTEX_CMPXCHG
xtensa: nommu: fix default memory start address
xtensa: nommu: provide correct KIO addresses
xtensa: nommu: fix USER_RING definition
xtensa: xtfpga: fix integer overflow in TASK_SIZE
xtensa: fix build for configs without cache options
xtensa: fixes for configs without loop option
There are no .bootstrap or .ResetVector.text sections linked to the
vmlinux image, drop these sections from vmlinux.ld.S. Drop
RESET_VECTOR_VADDR definition only used for .ResetVector.text.
Drop remapped copies of primary and secondary reset vectors, as modern
gdb don't have problems stepping through instructions at arbitrary
locations. Drop corresponding sections from the corresponding linker
scripts.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Enable building all dtb files when CONFIG_OF_ALL_DTBS is enabled. The dtbs
are not really dependent on a platform being enabled or any other kernel
config, so for testing coverage it is convenient to build all of the dtbs.
This builds all dts files in the tree, not just targets listed.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-xtensa@linux-xtensa.org
This includes OpenCores I2C host controller, TI CDCE706 clock generator,
xtfpga I2S master controller, xtfpga SPI master controller, TI TLV320AIC23
audio codec and a simple audio card.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use the same offset from the default physical memory start address as in
LOAD_MEMORY_ADDRESS definition.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Don't hardcode kernel entry address as 0x3000 or 0xd0003000, use
LOAD_MEMORY_ADDRESS macro. Don't compile MMU remapping code and don't try
to link it when building noMMU configuration.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This config allows running SMP-enabled bitstream on LX200 board.
NFS or FLASH rootfs, minimal debug, up to 4 cores.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Enable all memory available on KC705 (1G - 128M) by default. Update memory
node in DTS and also limit usable memory in bootargs in case memmap is
passed from the bootloader.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Connect xtfpga board ethernet MAC to the clock in the DTS. Set up MAC
base frequency in the platform data in case of build w/o CONFIG_OF.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
With this change the board needs to set up single clock object, users of
this clock will get correct frequency automatically.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The recommended compatible string format, according to the ePAPR v1.1 standard,
is "manufacturer,model". Change the xtensa cpu compatible strings to
"cdns,xtensa-cpu". Also, change the boards compatible strings in a similar way.
The pic compatible string will be dealt with in a separate patch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Extract xtensa built-in interrupt controller implementation from
xtensa/kernel/irq.c and move it to other irqchips, providing way to
instantiate it from the device tree.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
-e is not needed to output strings without escape sequences. This breaks
big endian FSF build when the shell is dash, because its builtin echo
doesn't understand '-e' switch and outputs it in the echoed string.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
With the patch to support MMUv3, the base address for the loaded
binary image has changed, and a fix was applied to the U-Boot image.
This fixes the RedBoot image.
Signed-off-by: Chris Zankel <chris@zankel.net>
The current rules have the .dtb files build in a different directory
from the .dts files. This patch changes xtensa to use the generic dtb
rule which builds .dtb files in the same directory as the source .dts.
This requires moving parts of arch/xtensa/boot/Makefile into newly
created arch/xtensa/boot/dts/Makefile, and updating arch/xtensa/Makefile
to call the new Makefile.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Add common XTFPGA parts as *.dtsi (base board, flash) and DTS for LX60
and for ML605.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
The Avnet LX60/LX110/LX200 board is an FPGA board that can be configured with
an Xtensa processor and an OpenCores Ethernet device.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Device trees allow specification of hardware topology and device
parameters at runtime instead of hard-coding them in platform setup
code. This allows running single binary kernel on a range of compatible
boards.
New boot parameters tag BP_TAG_FDT is allocated and a pointer to flat
device tree is passed in it.
Note that current interrupt mapping scheme uses single cell for
interrupt identification. That means that IRQ numbers used in DTS must
be CPU internal IRQ numbers, not external. It is possible to extend
interrupt identification to two cells, and use second cell to tell
external IRQ numbers form internal. That would allow to use single DTS
on multiple boards with different mapping of external IRQ numbers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
- remove duplicate rules for binary and packed image
- use predefined macros for ld/objcopy/gzip
- remove build-id section from bootable elf image
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
- reference SRs by names where possible, not by numbers;
- get rid of __stringify around SR names where possible;
- remove unneeded SR names from asm/regs.h;
- add SREG_ prefix to remaining SR names;
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Remove Kconfig entries, boot subdirectory, dependencies from other
boot-* Makefiles, and sections from ld scripts.
Remove stale redboot code that used to pass initrd addresses in a3 and
a4 to _start.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Make vmlinux.tmp and vmlinux.tmp.gz separate build targets, avoid
removing vmlinux.tmp during vmlinux.tmp.gz build.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Replace EXTRA_CFLAGS with ccflags-y.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Move all header files for xtensa to arch/xtensa/include and platform and
variant header files to the appropriate arch/xtensa/platforms/ and
arch/xtensa/variants/ directories.
Moving the files gets also rid of all uses of symlinks in the Makefile.
This has been completed already for the majority of the architectures
and xtensa is one out of six missing.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chris Zankel <chris@zankel.net>
When building with binutils-2.18, vmlinux includes .note.gnu.build-id
sections that need to be stripped out when building the binary image.
The old .xt.insn sections haven't been used for a long time, so don't
bother stripping them.
Signed-off-by: Bob Wilson <bob.wilson@acm.org>
Signed-off-by: Chris Zankel <chris@zankel.net>
Move boot-redboot load address from 0xD0200000 to 0xD1000000
to make space for larger kernel images, in particular those with
an embedded initramfs filesystem.
Also properly set the ELF start address in boot-elf images so
that PC need not be set manually when loading them using GDB.
Signed-off-by: Marc Gauthier <marc@tensilica.com>
Commit 9a39e273d4 removed the boot directory
addition to CFLAGS that was being used by the subdirectory builds. For the
other files, that patch set EXTRA_CFLAGS, but Makefile.build explicitly
sets that to empty as it is explicitly for a single directory only.
Append to KBUILD_CFLAGS instead.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The variable CFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.
This patch replace use of CFLAGS with KBUILD_CFLAGS all over the
tree and enabling one to use:
make CFLAGS=...
to specify additional gcc commandline options.
One usecase is when trying to find gcc bugs but other
use cases has been requested too.
Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k
Test was simple to do a defconfig build, apply the patch and check
that nothing got rebuild.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Only in very rare cases is it needed to change CFLAGS
outside of arch/*/Makefile.
Fix up all wrong cases - in most cases
the use of EXTRA_CFLAGS is the only thing needed.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The Xtensa port contained many header files that were never needed. This
rather lengthy patch removes all those files. Unfortunately, there were
many dependencies that needed to be updated, so this patch touches quite a
few source files.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Upgrade the zlib_inflate implementation in the kernel from a patched
version 1.1.3/4 to a patched 1.2.3.
The code in the kernel is about seven years old and I noticed that the
external zlib library's inflate performance was significantly faster (~50%)
than the code in the kernel on ARM (and faster again on x86_32).
For comparison the newer deflate code is 20% slower on ARM and 50% slower
on x86_32 but gives an approx 1% compression ratio improvement. I don't
consider this to be an improvement for kernel use so have no plans to
change the zlib_deflate code.
Various changes have been made to the zlib code in the kernel, the most
significant being the extra functions/flush option used by ppp_deflate.
This update reimplements the features PPP needs to ensure it continues to
work.
This code has been tested on ARM under both JFFS2 (with zlib compression
enabled) and ppp_deflate and on x86_32. JFFS2 sees an approx. 10% real
world file read speed improvement.
This patch also removes ZLIB_VERSION as it no longer has a correct value.
We don't need version checks anyway as the kernel's module handling will
take care of that for us. This removal is also more in keeping with the
zlib author's wishes (http://www.zlib.net/zlib_faq.html#faq24) and I've
added something to the zlib.h header to note its a modified version.
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Joern Engel <joern@wh.fh-wedel.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Removed an unnecessary local copy of zlib (sorry for the add'l traffic).
Fixed 'O=' support (thanks to Jan Dittmer for pointing it out). Some minor
clean-ups in the make files.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The attached patches provides part 2 of an architecture implementation for the
Tensilica Xtensa CPU series.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Max Filippov