Before adding new modes, rename the only existing one to report
the bit depth to distinguish it from future additions.
While at it, briefly describe the mode.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Support the get_selection() pad operation to report the device
full pixel array size, the currently applied analogue crop rectangle and
the active pixel array dimensions.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Break format handling out from the main driver structure.
This commit prepares for the introduction of more sensor formats and
resolutions by instrumenting the existing operation to work on multiple
modes instead of assuming a single supported one.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The driver structure name is referred to with different names ('ov5647',
'state', 'sensor') in different functions in the driver.
Polish this up by using 'struct ov5647 *sensor' everywhere.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add controls to support AWB, AEC and AGC. Also add control support to
set exposure (in lines) and analogue gain (as a register code).
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the driver mutex to protect s_stream() operations.
This will become more relevant once the sensor will support more formats
and set_format() could be issue concurrently to s_stream().
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Implement the .enum_frame_size subdev pad operation.
As the driver only supports one format and one resolution at the moment
the implementation is trivial.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rename __sensor_init() function to ov5647_set_mode() as the function
is a regular one and the double underscores prefix shall be removed, and
then move it to program the mode at s_stream(1) time, not at sensor power
up.
Break out from __sensor_init() the stream_off() operation call at sensor
power up to coax the lanes in LP-11 state.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The ov5647_read()/ov5647_write() return in case of success the number
of bytes read or written respectively. This requires callers to check
if the return value is less than zero to detect an error. Unfortunately,
in several places, callers directly return the result of a read/write
call, causing issues when the returned valued is checked to be different
from zero to detect an error.
Fix this by returning zero if i2c_master_send() and i2c_master_read()
return a positive value (the number of bytes written or read).
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Replace the boilerplate license text with the SPDX identifier.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The driver has some obvious style issues which are worth fixing before
expanding the driver capabilities.
Fix:
- Variable declaration order
- Function parameters alignment
- Multi-line comments and spurious line breaks
- Use lowercase for hexadecimal values
- > 80 cols lines
Cosmetic change, no functional changes intended.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The driver currently support a single format. Fix its initialization to
use the only supported resolution.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There's no way to query the subdevice for the supported
resolutions. Add set_fmt and get_fmt implementations. Since there's
only one format supported set_fmt does nothing and get returns single
format.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support for optional non-continuous clock mode to the ov5647
sensor driver.
Non-continuous clock saves a small amount of power and on some SoCs
is easier to interface with.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support for an optional GPIO connected to PWDN on the sensor. This
allows the use of hardware standby mode where internal device clock
and circuit activities are halted.
Please note that power is off when PWDN is high.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The link_validate pad op will only be called on sink pads. Document this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
We no longer have format related callbacks in video ops. Remove the
reference to them.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The dst_handle field in the PUT_STREAM_BUFFER and ENCODE_FRAME_RESPONSE
is used to retrieve the V4L2 CAPTURE buffer. Calling it stream_id is
confusing. Call it dst_handle inspired by src_handle for the OUTPUT
buffer.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The v4l2-m2m has various helpers for correctly handle the draining. Drop
the driver specific state machine and use the m2m helper functions.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Convert the Allegro DVT video IP codec text binding to Yaml.
Add the converted binding to the MAINTAINERS file.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The stateful encoder API was finalized. Nothing is blocking the driver
from being moved out of staging.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The "channel" is added to the "dev->channels" but then if
v4l2_m2m_ctx_init() fails then we free "channel" but it's still on the
list so it could lead to a use after free. Let's not add it to the
list until after v4l2_m2m_ctx_init() succeeds.
Fixes: cc62c74749 ("media: allegro: add missed checks in allegro_open()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If the CEC device was unregistered, then add EPOLLPRI to
the poll() mask. Otherwise a select() that only waits for
exceptions will not wake up. A select() that waits for
read and/or write events *will* wake up on an EPOLLERR, but
not (for some reason) if it just waits for exceptions.
Strangly the epoll functionality will wakeup on EPOLLERR if
you just wait for an exception, so in this respect select()
and epoll differ.
In the end it doesn't really matter, what matters is that
polling file handles are woken up on device unregistration.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If the V4L2 device was unregistered, then add EPOLLPRI to
the poll mask. Otherwise a select() that only waits for
exceptions will not wake up. A select() that waits for
read and/or write events *will* wake up on an EPOLLERR, but
not (for some reason) if it just waits for exceptions.
Strangly the epoll functionality will wakeup on EPOLLERR if
you just wait for an exception, so in this respect select()
and epoll differ.
In the end it doesn't really matter, what matters is that
polling file handles are woken up on device unregistration.
It also improves the code a bit if vdev->fops->poll is NULL:
this didn't check for device unregistration.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When the disconnect error injection control is set, then besides
faking unregistering the device nodes, also call v4l2_event_wake_all()
to ensure any userspace applications will wake up as per a 'normal'
unregister.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When unregistering a V4L2 device node, make sure any filehandles
that are waiting for an event are woken up.
Add v4l2_event_wake_all() to v4l2-event.c and call it from
video_unregister_device().
Otherwise userspace might never know that a device node was removed.
[hverkuil: checkpatch: replaced 'if (vdev == NULL)' by 'if (!vdev)']
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
do_poll()/do_select() seem to set the _qproc member of poll_table to
NULL the first time they are called on a given table, making subsequent
calls of poll_wait() on that table no-ops. This is a problem for mem2mem
which calls poll_wait() on the V4L2 queues' waitqueues only when a
queue-related event is requested, which may not necessarily be the case
during the first poll.
For instance, a stateful decoder is typically only interested in
EPOLLPRI events when it starts, and will switch to listening to both
EPOLLPRI and EPOLLIN after receiving the initial resolution change event
and configuring the CAPTURE queue. However by the time that switch
happens and v4l2_m2m_poll_for_data() is called for the first time,
poll_wait() has become a no-op and the V4L2 queues waitqueues thus
cannot be registered.
Fix this by moving the registration to v4l2_m2m_poll() and do it whether
or not one of the queue-related events are requested.
Signed-off-by: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
do_poll()/do_select() seem to set the _qproc member of poll_table to
NULL the first time they are called on a given table, making subsequent
calls of poll_wait() on that table no-ops. This is a problem for vb2
which calls poll_wait() on the V4L2 queues' waitqueues only when a
queue-related event is requested, which may not necessarily be the case
during the first poll.
Fix this by making the call to poll_wait() happen first thing and
unconditionally in vb2_core_poll().
Signed-off-by: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch adds custom V4L2 control for syncpt timeout retry to continue
capture on error for specified retries count through this control.
This is useful for HDMI-to-CSI bridge debug purposes like for hotplug scenarios
or for ignoring captures till HDMI input is stabilized.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tegra VI/CSI hardware don't have native 8 lane capture support.
Each CSI port has max 4 lanes only. So for x8 captures, consecutive
ports are ganged up for left half and right half captures on to each
x4 ports with buffer offsets based on source image split width to align
side-by-side.
All ports in gang are configured together during the corresponding
video device node streaming for x8 captures.
x8 capture with gang ports are supported with HDMI-to-CSI bridges
where they split 4K image into left half onto one x4 port and
right half onto second x4 port.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tegra VI/CSI hardware don't have native 8 lane CSI RX port.
But x8 capture can be supported by using consecutive x4 ports
simultaneously with HDMI-to-CSI bridges where source image is split
on to two x4 ports.
This patch updates dt-bindings for csi endpoint data-lane property
with maximum of 8 lanes.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some CSI2 receivers support 8 data lanes.
So, this patch updates CSI2 maximum data lanes to be 8.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Implement V4L2 device notify callback to handle
V4L2_EVENT_SOURCE_CHANGE event from subdevices.
HDMI-to-CSI bridge drivers trigger V4L2_EVENT_SOURCE_CHANGE when
source DV timing changes are detected or when HDMI hotplug happens.
Runtime source parameter changes during active streaming is not
allowed and Tegra video driver calls vb2_queue_error to signal a
fatal error if a notification of this event happens during an active
streaming.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Current implementation uses v4l2_ctrl_subscribe_event() and this
does not handle V4L2_EVENT_SOURCE_CHANGE.
So, update driver to handle V4L2_EVENT_SOURCE_CHANGE.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch adds support for log_status ioctl.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch adds support for EDID get and set v4l2 ioctl ops to use
with HDMI to CSI bridges.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch adds below v4l2 DV timing ioctls to support HDMI-to-CSI
bridges.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
NV16 are two-plane versions of YUV422 format.
VI/CSI surface0 registers corresponds to first Y plane and
surface1 registers corresponds to seconds UV plane.
This patch updates image size for NV16 format to include both planes
and programs VI/CSI surface1 registers for UV plane capture.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
V4L2 pixel format is incorrect for RGB and YUV formats.
This patch fixes it.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
VI Pixel transforms converts source pixel data to selected
destination pixel formats in memory and aligns properly.
YUV and RGB formats need this pixel transform to be enabled.
RAW formats use T_R16_I destination pixel format in memory and
does not need pixel transform as they support direct write to
memory.
So, this patch enables pixel transform for YUV and RGB and keeps
it bypass for RAW formats.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently try format implementation doesn't check if subdevice has
get_selection ops implemented and returns -EINVAL on error from
direct v4l2_subdev_call of get_selection.
Selection API's are not mandatory for all V4L2 subdevices.
This patch fixes it by adding v4l2_subdev_has_ops check prior to
calling get_selection ops and continues with try or set format with
zero crop settings for subdevices that don't have get_selection and
returns -EINVAL only for subdevices that has get_selection ops.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rework the context API exposed to cal-video.c to simplify it. The
configuration and enable steps are all grouped in a single
cal_ctx_start() function, and the DMA stop and IRQ disable are similarly
groupd in cal_ctx_stop(). The cal_ctx_wr_dma_addr() function is renamed
to cal_ctx_set_dma_addr() for consistency with the cal_ctx_ prefix of
the start and stop functions.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
dma_addr_t is the correct type to store DMA addresses. Replace incorrect
usage of unsigned long and unsigned int.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When a pending buffer becomes active, the cal_dmaqueue.active field is
updated, but the pending field keeps the same value until a new buffer
becomes pending. This requires handling the special case of
pending == active in different places. Simplify the code by setting the
pending field to NULL when the pending buffer becomes active. Buffers
are now simply moved from queue to pending and from pending to active.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The cal_dmaqueue structure only contains the list of queued buffers.
Move the other fields that are logically related to the DMA queue
(current and next buffer points, state, wait queue and lock) from
cal_ctx to cal_dmaqueue.
Take this as an opportunity to document the fields usage and to give
them more appropriate names. The 'active' field stored the list of all
queued buffers, not the active buffers, so rename it to 'queue'. The
'cur_frm' and 'next_frm' are respectively renamed to 'active' and
'pending' to better explain their purpose. The 'dma_state' and
'dma_wait' fields are stripped of their 'dma_' prefix as they're now
part of cal_dmaqueue. Finally, 'slock' is renamed to 'lock'.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the list_first_entry() macro where appropriate to replace manual
usage of list_entry(head.next).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The vb2 queue ensures that the start streaming operation will only be
called with a minimal number of buffers queued to the driver. There's
thus no need to manually check if the DMA queue is empty. Remove the
check.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jacopo Mondi