Commit Graph

495012 Commits

Author SHA1 Message Date
Daniel Mack 49cdd5b641 ALSA: snd-usb-caiaq: fix stream count check
Commit 897c329bc ("ALSA: usb: caiaq: check for cdev->n_streams > 1")
introduced a safety check to protect against bogus data provided by
devices. However, the n_streams variable is already divided by
CHANNELS_PER_STREAM, so the correct check is 'n_streams > 0'.

Fix this to un-break support for stereo devices.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Cc: stable@kernel.org [v3.18+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-05 08:56:19 +01:00
Felipe Balbi 7ce67a38f7 net: ethernet: cpsw: fix hangs with interrupts
The CPSW IP implements pulse-signaled interrupts. Due to
that we must write a correct, pre-defined value to the
CPDMA_MACEOIVECTOR register so the controller generates
a pulse on the correct IRQ line to signal the End Of
Interrupt.

The way the driver is written today, all four IRQ lines
are requested using the same IRQ handler and, because of
that, we could fall into situations where a TX IRQ fires
but we tell the controller that we ended an RX IRQ (or
vice-versa). This situation triggers an IRQ storm on the
reserved IRQ 127 of INTC which will in turn call ack_bad_irq()
which will, then, print a ton of:

	unexpected IRQ trap at vector 00

In order to fix the problem, we are moving all calls to
cpdma_ctlr_eoi() inside the IRQ handler and making sure
we *always* write the correct value to the CPDMA_MACEOIVECTOR
register. Note that the algorithm assumes that IRQ numbers and
value-to-be-written-to-EOI are proportional, meaning that a
write of value 0 would trigger an EOI pulse for the RX_THRESHOLD
Interrupt and that's the IRQ number sitting in the 0-th index
of our irqs_table array.

This, however, is safe at least for current implementations of
CPSW so we will refrain from making the check smarter (and, as
a side-effect, slower) until we actually have a platform where
IRQ lines are swapped.

This patch has been tested for several days with AM335x- and
AM437x-based platforms. AM57x was left out because there are
still pending patches to enable ethernet in mainline for that
platform. A read of the TRM confirms the statement on previous
paragraph.

Reported-by: Yegor Yefremov <yegorslists@googlemail.com>
Fixes: 510a1e7 (drivers: net: davinci_cpdma: acknowledge interrupt properly)
Cc: <stable@vger.kernel.org> # v3.9+
Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-04 22:18:34 -05:00
Linus Torvalds 693a30b8f1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML fixes from Richard Weinberger:
 "Two fixes for UML regressions. Nothing exciting"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  x86, um: actually mark system call tables readonly
  um: Skip futex_atomic_cmpxchg_inatomic() test
2015-01-04 11:46:43 -08:00
Pavel Machek 4bf9636c39 Revert "ARM: 7830/1: delay: don't bother reporting bogomips in /proc/cpuinfo"
Commit 9fc2105aea ("ARM: 7830/1: delay: don't bother reporting
bogomips in /proc/cpuinfo") breaks audio in python, and probably
elsewhere, with message

  FATAL: cannot locate cpu MHz in /proc/cpuinfo

I'm not the first one to hit it, see for example

  https://theredblacktree.wordpress.com/2014/08/10/fatal-cannot-locate-cpu-mhz-in-proccpuinfo/
  https://devtalk.nvidia.com/default/topic/765800/workaround-for-fatal-cannot-locate-cpu-mhz-in-proc-cpuinf/?offset=1

Reading original changelog, I have to say "Stop breaking working setups.
You know who you are!".

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-04 11:39:59 -08:00
Daniel Borkmann b485342bd7 x86, um: actually mark system call tables readonly
Commit a074335a37 ("x86, um: Mark system call tables readonly") was
supposed to mark the sys_call_table in UML as RO by adding the const,
but it doesn't have the desired effect as it's nevertheless being placed
into the data section since __cacheline_aligned enforces sys_call_table
being placed into .data..cacheline_aligned instead. We need to use
the ____cacheline_aligned version instead to fix this issue.

Before:

$ nm -v arch/x86/um/sys_call_table_64.o | grep -1 "sys_call_table"
                 U sys_writev
0000000000000000 D sys_call_table
0000000000000000 D syscall_table_size

After:

$ nm -v arch/x86/um/sys_call_table_64.o | grep -1 "sys_call_table"
                 U sys_writev
0000000000000000 R sys_call_table
0000000000000000 D syscall_table_size

Fixes: a074335a37 ("x86, um: Mark system call tables readonly")
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-01-04 14:21:25 +01:00
Richard Weinberger f911d73105 um: Skip futex_atomic_cmpxchg_inatomic() test
futex_atomic_cmpxchg_inatomic() does not work on UML because
it triggers a copy_from_user() in kernel context.
On UML copy_from_user() can only be used if the kernel was called
by a real user space process such that UML can use ptrace()
to fetch the value.

Reported-by: Miklos Szeredi <miklos@szeredi.hu>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Daniel Walter <d.walter@0x90.at>
2015-01-04 14:20:26 +01:00
Dave Airlie 2f6bd4da08 Merge tag 'amdkfd-fixes-2014-12-30' of git://people.freedesktop.org/~gabbayo/linux into linus
Highlights:

- Link order changes in drm/Makefile and drivers/Makefile to fix issue
  when amdkfd, radeon and amd_iommu_v2 are compiled inside the kernel
  image.

- Consider kernel configuration (using #IFDEFs) when radeon initializes
  amdkfd, due to a specific configuration that makes symbol_request()
  return a non-NULL value when a symbol doesn't exists. Rusty Russel
  is helping me to find the root cause, but it may take a while because
  of year-end so I'm sending this as a band-aid solution.

* tag 'amdkfd-fixes-2014-12-30' of git://people.freedesktop.org/~gabbayo/linux:
  drm/radeon: Init amdkfd only if it was compiled
  amdkfd: actually allocate longs for the pasid bitmask
  drm: Put amdkfd before radeon in drm Makefile
  drivers: Move iommu/ before gpu/ in Makefile
  amdkfd: Remove duplicate include
  amdkfd: Fixing topology bug in building sysfs nodes
  amdkfd: Fix accounting of device queues
2015-01-04 17:44:43 +10:00
Dave Airlie 379a2d31cb Merge tag 'drm-intel-next-fixes-2014-12-30' of git://anongit.freedesktop.org/drm-intel into linus
I've had these since before -rc1, but they missed my last pull
request. Real bug fixes and mostly cc: stable material.

* tag 'drm-intel-next-fixes-2014-12-30' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: add missing rpm ref to i915_gem_pwrite_ioctl
  Revert "drm/i915: Preserve VGACNTR bits from the BIOS"
  drm/i915: Don't call intel_prepare_page_flip() multiple times on gen2-4
  drm/i915: Kill check_power_well() calls
2015-01-04 17:41:00 +10:00
Namhyung Kim e7024fc378 perf diff: Fix to sort by baseline field by default
The currently perf diff didn't add the baseline and delta (or other
compute) fields to the sort list so output will be sorted by other
fields like alphabetical order of DSO or symbol as below example.

Fix it by adding hpp formats for the fields and provides default compare
functions.

Before:

  $ perf diff
  # Event 'cycles'
  #
  # Baseline    Delta  Shared Object       Symbol
  # ........  .......  ..................  ...............................
  #
                       [bridge]            [k] ip_sabotage_in
                       [btrfs]             [k] __etree_search.constprop.47
       0.01%           [btrfs]             [k] btrfs_file_mmap
       0.01%   -0.01%  [btrfs]             [k] btrfs_getattr
                       [e1000e]            [k] e1000_watchdog
       0.00%           [kernel.vmlinux]    [k] PageHuge
       0.00%           [kernel.vmlinux]    [k] __acct_update_integrals
       0.00%           [kernel.vmlinux]    [k] __activate_page
                       [kernel.vmlinux]    [k] __alloc_fd
       0.02%   +0.02%  [kernel.vmlinux]    [k] __alloc_pages_nodemask
       ...

After:

  # Baseline    Delta  Shared Object       Symbol
  # ........  .......  ..................  ................................
  #
      24.73%   -4.62%  perf                [.] append_chain_children
       7.96%   -1.29%  perf                [.] dso__find_symbol
       6.97%   -2.07%  libc-2.20.so        [.] vfprintf
       4.61%   +0.88%  libc-2.20.so        [.] __fprintf_chk
       4.41%   +2.43%  perf                [.] sort__comm_cmp
       4.10%   -0.16%  perf                [.] comm__str
       4.03%   -0.93%  perf                [.] machine__findnew_thread_time
       3.82%   +3.09%  perf                [.] __hists__add_entry
       2.95%   -0.18%  perf                [.] sort__dso_cmp
       ...

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1419656793-32756-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-02 23:27:18 -03:00
Taesoo Kim b350520880 perf list: Fix --raw-dump option
Currently, 'perf list --raw-dump' requires extra arguments
(e.g., hw) to invoke, which breaks bash/zsh completion
(perf-completion.sh).

  $ perf list --raw-dump
    Error: unknown option `raw-dump'

     usage: perf list [hw|sw|cache|tracepoint|pmu|event_glob]

After,

  $ perf list --raw-dump
  cpu-cycles instructions cache-references cache-misses ...

Signed-off-by: Taesoo Kim <tsgatesv@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taesoo kim <taesoo@gatech.edu>
Link: http://lkml.kernel.org/r/1419997015-11071-1-git-send-email-tsgatesv@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-02 23:26:58 -03:00
Govindarajulu Varadarajan 9dac6232e2 enic: free all rq buffs when allocation fails
When allocation of all RQs fail, we do not free previously allocated buffers,
before returning error. This causes memory leak.

This patch fixes this by calling vnic_rq_clean(), which frees all the rq
buffers.

Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02 16:43:45 -05:00
Kristian Evensen 531ad4282e qmi_wwan: Set random MAC on devices with buggy fw
Some buggy firmwares export an incorrect MAC address (00:a0:c6:00:00:00). This
makes for example checking devices for random MAC addresses tricky, and you
might end up with multiple network interfaces with the same address.

This patch tries to fix, or at least improve, the situation by setting the MAC
address of devices with this firmware bug to a random address. I tested the
patch with two devices that has this firmware bug (Huawei E398 and E392), and
network traffic worked fine after changing the address.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02 16:41:47 -05:00
Linus Torvalds d753856c9f SCSI fixes on 20150102
This is a set of three fixes: one to correct an abort path thinko causing
 failures (and a panic) in USB on device misbehaviour, One to fix an out of
 order issue in the fnic driver and one to match discard expectations to qemu
 which otherwise cause Linux to behave badly as a guest.
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABAgAGBQJUpsmHAAoJEDeqqVYsXL0MdToH/1UsmOdtxNh6AfBDWWYi45o8
 kBno1gTnRrDgIlOiRu+BtmL25A1rNcCdCQKjG6JBEBruqUVAwZztktGjfuSvso6s
 EYbrnE+5DmDs6cW8pp6GK3QGV+R+AmbT8oBbe/Kpg5LdTsdnQOozSycUp7X3XgTi
 pLOm6rW/AgEV1QFcQz1bjI6cnbcOZMcGZnC5qwphiKgBnVYd+PZY24RSHDKCu/va
 z2lsa5yqXFHKZZZRhYG343YqCTf3Dkph78124JoNvVm3EjO+GQAAiojiUa7l59UF
 RqNRqeMxfz2cPmBnJxbNmWiP1YQGBgOaNDRgc7D7SPxaMwUe9444Gm4MkoZWzmQ=
 =706l
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is a set of three fixes: one to correct an abort path thinko
  causing failures (and a panic) in USB on device misbehaviour, One to
  fix an out of order issue in the fnic driver and one to match discard
  expectations to qemu which otherwise cause Linux to behave badly as a
  guest"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  SCSI: fix regression in scsi_send_eh_cmnd()
  fnic: IOMMU Fault occurs when IO and abort IO is out of order
  sd: tweak discard heuristics to work around QEMU SCSI issue
2015-01-02 13:24:41 -08:00
Ben Pfaff 24cc59d1eb openvswitch: Consistently include VLAN header in flow and port stats.
Until now, when VLAN acceleration was in use, the bytes of the VLAN header
were not included in port or flow byte counters.  They were however
included when VLAN acceleration was not used.  This commit corrects the
inconsistency, by always including the VLAN header in byte counters.

Previous discussion at
http://openvswitch.org/pipermail/dev/2014-December/049521.html

Reported-by: Motonori Shindo <mshindo@vmware.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Reviewed-by: Flavio Leitner <fbl@sysclose.org>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02 16:14:20 -05:00
Herbert Xu 843925f33f tcp: Do not apply TSO segment limit to non-TSO packets
Thomas Jarosch reported IPsec TCP stalls when a PMTU event occurs.

In fact the problem was completely unrelated to IPsec.  The bug is
also reproducible if you just disable TSO/GSO.

The problem is that when the MSS goes down, existing queued packet
on the TX queue that have not been transmitted yet all look like
TSO packets and get treated as such.

This then triggers a bug where tcp_mss_split_point tells us to
generate a zero-sized packet on the TX queue.  Once that happens
we're screwed because the zero-sized packet can never be removed
by ACKs.

Fixes: 1485348d24 ("tcp: Apply device TSO segment limit earlier")
Reported-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Cheers,
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02 16:13:20 -05:00
Linus Torvalds 6a4bfa7c3f sound fixes for 3.19-rc3
Nothing too exciting as a new year's start here: most of fixes are for
 ASoC, a boot crash fix on OMAP for deferred probe, a few driver
 specific fixes (Intel, dwc, rockchip, rt5677), in addition to typo
 fixes in kerneldoc comments for PCM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUplctAAoJEGwxgFQ9KSmkmjwP/0Ccw2+8sh3uqPbmiwCBOYYL
 AUo0nhjvsoeCFqgs1rUdQBEeVqvTw5wckhmnvDAYri4wSlnT078m9o4lJpTo/Bem
 1VngAWjcA7CErhaU9G988znGAuIWhf9nr/DVhabIr22vmsPrGUDQrC3B/28596mn
 Pcj2H412vZRMOu6+ZDKX+9oxAWBnP9UDD3hjrKjTCUxwVlhfxAfdbsPNbkivIrLb
 QAkhqIHuMlb3D2MaBUjbQ+CQf+Q0N1szZoy9t83OCUgbNhmNObuwvso21mD92mwQ
 4reW0TdFHXOk3HrY0RBMkvnmrRzZoPBWxBH0bCTLO87rBtZC11IdkMpQ9mZ7gO9Q
 p/P8z+S1I8nuVmFamW0IbSjslVl8+zh/hJ3H+t4bZlOJgXevcl+VwIocsNcdPhTo
 V8CqcgwKLwwMuPOgHsiHk+2uCDxm23zmlgo5jyOuKuSnKxo5qu1aH3Mw7mU3S3dd
 +AOWmM4ighCK2rXkFJSH4UV7/bFIFGS0wfC7adqHW2BaXS/CRStwoYw/7C48c9Mk
 bY3vSjk7HwOebdnhwXclqWpLDPnmAWWfQvYW+mYakIWX0+qLpL1BFQUr6fYwmLMP
 GpPBdgqZmrchwEKQM5Wg+Gz4jlkOXzs1qUMidq4f6JxM2A1H2A8BfTz3pScJqqDh
 +lHj5upG2yVpYQbf4DEf
 =ARQX
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Nothing too exciting as a new year's start here: most of fixes are for
  ASoC, a boot crash fix on OMAP for deferred probe, a few driver
  specific fixes (Intel, dwc, rockchip, rt5677), in addition to typo
  fixes in kerneldoc comments for PCM"

* tag 'sound-3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: pcm: Fix kerneldoc for params_*() functions
  ASoC: rockchip: i2s: fix maxburst of dma data to 4
  ASoC: rockchip: i2s: fix error defination of transmit data level
  ASoC: Intel: correct the fixed free block allocation
  ASoC: rt5677: fixed rt5677_dsp_vad_put rt5677_dsp_vad_get panic
  ASoC: Intel: Fix BYTCR machine driver MODULE_ALIAS
  ASoC: Intel: Fix BYTCR firmware name
  ASoC: dwc: Iterate over all channels
  ASoC: dwc: Ensure FIFOs are flushed to prevent channel swap
  ASoC: Intel: Add I2C dependency to two new machines
  ASoC: dapm: Remove snd_soc_of_parse_audio_routing() due to deferred probe
2015-01-02 12:57:20 -08:00
Kostya Belezko c484994eb3 Altera TSE: Add missing phydev
Altera network device doesn't come up after

ifconfig eth0 down
ifconfig eth0 up

The reason behind is clearing priv->phydev during tse_shutdown().
The phydev is not restored back at tse_open().

Resubmiting as to follow Tobias Klauser suggestion.
phy_start/phy_stop are called on each ifup/ifdown and
phy_disconnect is called once during the module removal.

Signed-off-by: Kostya Belezko <bkostya@hotmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02 15:45:10 -05:00
David S. Miller 2b972acbe5 Merge branch 'mlx4-net'
Or Gerlitz says:

====================
mlx4 driver fixes for 3.19-rc2

Please push Maor's patch to -stable >= 3.17

Jack's fixes error-flow issues introduced in 3.19-rc1, no need for -stable.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02 15:41:33 -05:00
Jack Morgenstein d0d012509f net/mlx4_core: Fix error flow in mlx4_init_hca()
We shouldn't call UNMAP_FA here, this is done in mlx4_load_one.

If mlx4_query_func fails, we need to invoke CLOSE_HCA for both
native and master.

Fixes: a0eacca948 ('net/mlx4_core: Refactor mlx4_load_one')
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02 15:41:29 -05:00
Maor Gottlieb a51e0df4c1 net/mlx4_core: Correcly update the mtt's offset in the MR re-reg flow
Previously, mlx4_mt_rereg_write filled the MPT's entity_size with the
old MTT's page shift, which could result in using an incorrect offset.
Fix the initialization to be after we calculate the new MTT offset.

In addition, assign mtt order to -1 after calling mlx4_mtt_cleanup. This
is necessary in order to mark the MTT as invalid and avoid freeing it later.

Fixes: e630664 ('mlx4_core: Add helper functions to support MR re-registration')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02 15:41:28 -05:00
Jakub Wilk 363307e6e5 ext4: remove spurious KERN_INFO from ext4_warning call
Signed-off-by: Jakub Wilk <jwilk@jwilk.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-01-02 15:31:14 -05:00
Theodore Ts'o ad7fefb109 Revert "ext4: fix suboptimal seek_{data,hole} extents traversial"
This reverts commit 14516bb7bb.

This was causing regression test failures with generic/285 with an ext3
filesystem using CONFIG_EXT4_USE_FOR_EXT23.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-01-02 15:16:00 -05:00
Linus Torvalds d7e19bd882 vhost: virtio 1.0 bugfix
There's a single change here, fixing a vhost bug where vhost initialization
 fails due to used ring alignment check being too strict.
 
 Cc: Rusty Russell <rusty@rustcorp.com.au>
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUoRcnAAoJECgfDbjSjVRpb7IIAIGoNJkB56Q3WWX0rP5i1Lqi
 Uxt8lrvySotzoWMVZlm2pGRiwJv2T1dQXKWetvZDn0GuwCBi2/vm2l4eOhu1K+VV
 jOtKk8n8kDJVgMOGaJUwqt8lhDbqGwHHDUCKDk78/pV5Q959bAVo143vWOh2DixQ
 m3YmvmLwyhF6CYNwOD0HqllaojDPBAP3k22GdmJNy/H7CpcOSYK7BRoiQHX7FsbR
 I3Kj/7gf5OlZFzLTLxNx/O01p1BkX6EusADfl3+tl6nggc6vqW9fHNz/TZLGh9I/
 ap0Ng3pm8q/t6S6wsPj8wzTHNesK4gVWvecRN8kZV8UQY2rwd/y7R/k+VpJDseg=
 =+Pmi
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull vhost cleanup and virtio bugfix
 "There's a single change here, fixing a vhost bug where vhost
  initialization fails due to used ring alignment check being too
  strict"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost: relax used address alignment
  virtio_ring: document alignment requirements
2015-01-02 12:07:50 -08:00
Chris Mason 6f8960541b Btrfs: don't delay inode ref updates during log replay
Commit 1d52c78afb (Btrfs: try not to ENOSPC on log replay) added a
check to skip delayed inode updates during log replay because it
confuses the enospc code.  But the delayed processing will end up
ignoring delayed refs from log replay because the inode itself wasn't
put through the delayed code.

This can end up triggering a warning at commit time:

WARNING: CPU: 2 PID: 778 at fs/btrfs/delayed-inode.c:1410 btrfs_assert_delayed_root_empty+0x32/0x34()

Which is repeated for each commit because we never process the delayed
inode ref update.

The fix used here is to change btrfs_delayed_delete_inode_ref to return
an error if we're currently in log replay.  The caller will do the ref
deletion immediately and everything will work properly.

Signed-off-by: Chris Mason <clm@fb.com>
cc: stable@vger.kernel.org # v3.18 and any stable series that picked 1d52c78afb
2015-01-02 14:47:56 -05:00
Filipe Manana a1317f455a Btrfs: correctly get tree level in tree_backref_for_extent
If we are using skinny metadata, the block's tree level is in the offset
of the key and not in a btrfs_tree_block_info structure following the
extent item (it doesn't exist). Therefore fix it.

Besides returning the correct level in the tree, this also prevents reading
past the leaf's end in the case where the extent item is the last item in
the leaf (eb) and it has only 1 inline reference - this is because
sizeof(struct btrfs_tree_block_info) is greater than
sizeof(struct btrfs_extent_inline_ref).

Got it while running a scrub which produced the following warning:

    BTRFS: checksum error at logical 42123264 on dev /dev/sde, sector 15840: metadata node (level 24) in tree 5

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-01-02 14:47:56 -05:00
Wang Shilong c7cfb8a540 Btrfs: call inode_dec_link_count() on mkdir error path
In btrfs_mkdir(), if it fails to create dir, we should
clean up existed items, setting inode's link properly
to make sure it could be cleaned up properly.

Signed-off-by: Wang Shilong <wangshilong1991@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-01-02 14:47:55 -05:00
Josef Bacik df95e7f0d9 Btrfs: abort transaction if we don't find the block group
We shouldn't BUG_ON() if there is corruption.  I hit this while testing my block
group patch and the abort worked properly.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-01-02 14:47:55 -05:00
Dan Carpenter 6b6d24b389 Btrfs, scrub: uninitialized variable in scrub_extent_for_parity()
The only way that "ret" is set is when we call scrub_pages_for_parity()
so the skip to "if (ret) " test doesn't make sense and causes a static
checker warning.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-01-02 14:47:55 -05:00
Chris Mason 4e0c4a47d7 Btrfs: add more maintainers
I'm lucky to have a huge amount of help on Btrfs, and want to thank
everyone that sends patches, does review and helps track down bugs.

Dave Sterba is a long time reviewer and contributor, and adding him
to the maintainers file reflects the excellent work he has been
doing for years.

Signed-off-by: Chris Mason <clm@fb.com>
2015-01-02 14:47:20 -05:00
Namhyung Kim 4093325f82 perf probe: Fix crash in dwarf_getcfi_elf
David reported that perf can segfault when adding an uprobe event like
this:

  $ perf probe -x /lib64/libc-2.14.90.so -a 'malloc  size=%di'

  (gdb) bt
  #0  parse_eh_frame_hdr (hdr=0x0, hdr_size=2596, hdr_vaddr=71788,
      ehdr=0x7fffffffd390, eh_frame_vaddr=
      0x7fffffffd378, table_entries=0x8808d8, table_encoding=0x8808e0 "") at
      dwarf_getcfi_elf.c:79
  #1  0x000000385f81615a in getcfi_scn_eh_frame (hdr_vaddr=71788,
      hdr_scn=0x8839b0, shdr=0x7fffffffd2f0, scn=<optimized out>,
      ehdr=0x7fffffffd390, elf=0x882b30) at dwarf_getcfi_elf.c:231
  #2  getcfi_shdr (ehdr=0x7fffffffd390, elf=0x882b30) at dwarf_getcfi_elf.c:283
  #3  dwarf_getcfi_elf (elf=0x882b30) at dwarf_getcfi_elf.c:309
  #4  0x00000000004d5bac in debuginfo__find_probes (pf=0x7fffffffd4f0,
      dbg=Unhandled dwarf expression opcode 0xfa) at util/probe-finder.c:993
  #5  0x00000000004d634a in debuginfo__find_trace_events (dbg=0x880840,
      pev=<optimized out>, tevs=0x880f88, max_tevs=<optimized out>) at
      util/probe-finder.c:1200
  #6  0x00000000004aed6b in try_to_find_probe_trace_events (target=0x881b20
      "/lib64/libpthread-2.14.90.so",
      max_tevs=128, tevs=0x880f88, pev=0x859b30) at util/probe-event.c:482
  #7  convert_to_probe_trace_events (target=0x881b20
      "/lib64/libpthread-2.14.90.so", max_tevs=128, tevs=0x880f88,
      pev=0x859b30) at util/probe-event.c:2356
  #8  add_perf_probe_events (pevs=<optimized out>, npevs=1, max_tevs=128,
      target=0x881b20 "/lib64/libpthread-2.14.90.so", force_add=false) at
      util/probe-event.c:2391
  #9  0x000000000044014f in __cmd_probe (argc=<optimized out>,
      argv=0x7fffffffe2f0, prefix=Unhandled dwarf expression opcode 0xfa) at
      at builtin-probe.c:488
  #10 0x0000000000440313 in cmd_probe (argc=5, argv=0x7fffffffe2f0,
      prefix=<optimized out>) at builtin-probe.c:506
  #11 0x000000000041d133 in run_builtin (p=0x805680, argc=5,
      argv=0x7fffffffe2f0) at perf.c:341
  #12 0x000000000041c8b2 in handle_internal_command (argv=<optimized out>,
      argc=<optimized out>) at perf.c:400
  #13 run_argv (argv=<optimized out>, argcp=<optimized out>) at perf.c:444
  #14 main (argc=5, argv=0x7fffffffe2f0) at perf.c:559

And I found a related commit (5704c8c4fa71 "getcfi_scn_eh_frame: Don't
crash and burn when .eh_frame bits aren't there.") in elfutils that can
lead to a unexpected crash like this.  To safely use the function, it
needs to check the .eh_frame section is a PROGBITS type.

Reported-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mark Wielaard <mjw@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/20141230090533.GH6081@sejong
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-02 12:44:01 -03:00
Masami Hiramatsu 906451b98b perf probe: Fix to fall back to find probe point in symbols
Fix to fall back to find a probe point in symbols if perf fails to find
it in debuginfo.

This can happen when the target function is an alias of another
function. Such alias doesn't have an entry in debuginfo but in symbols.

David Ahern reported this problem in https://lkml.org/lkml/2014/12/29/355

I ensured the problem and deeper investigation discovers it.
 -----
 eu-readelf --debug-dump=info /usr/lib/debug/lib/x86_64-linux-gnu/libc-2.19.so | grep \"malloc\" -A6
             name                 (strp) "malloc"
             decl_file            (data1) 25
             decl_line            (data2) 466
             prototyped           (flag_present)
             type                 (ref4) [  81b5]
             declaration          (flag_present)
 [  8f58]      formal_parameter
 --
             name                 (strp) "malloc"
             decl_file            (data1) 23
             decl_line            (data2) 466
             prototyped           (flag_present)
             type                 (ref4) [  9f4a]
             declaration          (flag_present)
             sibling              (ref4) [  bb29]
 ...
 -----
All these entires have no instances (all of them are declarations)
This is why the perf probe failed to find it in debuginfo.

However, there are some malloc instances in symbols.
 -----
 eu-readelf --symbols /usr/lib/debug/lib/x86_64-linux-gnu/libc-2.19.so | grep malloc$
  1181: 0000000000080700   5332 FUNC    LOCAL  DEFAULT       12 _int_malloc
  4537: 00000000000831d0    339 FUNC    LOCAL  DEFAULT       12 __GI___libc_malloc
  5545: 00000000000831d0    339 FUNC    LOCAL  DEFAULT       12 __malloc
  6063: 00000000000831d0    339 FUNC    GLOBAL DEFAULT       12 malloc
  7302: 00000000000831d0    339 FUNC    GLOBAL DEFAULT       12 __libc_malloc
 -----
As you an see, malloc and __libc_malloc have same address, and actually
__libc_malloc has an entry in debuginfo. So you can set up a probe on
__libc_malloc.

To fix this problem shortly, perf probe simply falls back to find probe
point(malloc) in symbols if it is not found in debuginfo.

Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20141231062747.2087.80961.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-02 12:42:17 -03:00
Michal Marek a16c5f99a2 kbuild: Fix removal of the debian/ directory
scripts/Makefile.clean treats absolute path specially, but
$(objtree)/debian is no longer an absolute path since 7e1c0477 (kbuild:
Use relative path for $(objtree). Work around this by checking if the
path starts with $(objtree)/.

Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Fixes: 7e1c0477 (kbuild: Use relative path for $(objtree)
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-01-02 14:51:27 +01:00
Ingo Molnar 5b5e76218f perf/urgent fixes and improvements:
User visible:
 
 - Show progress bar in more places while doing histogram processing
   in the hists browser (Namhyung Kim)
 
 - Print backtrace symbols when segfault occurs in 'report' (Namhyung Kim)
 
 Infrastructure:
 
 - Append callchains only when requested (Namhyung Kim)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUmYq/AAoJEBpxZoYYoA71M6cH/iK+G5s4u2sa66BbgSfp3DP1
 Vff5mW83cZ92JR4uSpLhTyk+TlQ8NwekN0hWnzW9MwAOnsLVAo2IFLg99Xv979rl
 1T0zpU13ord/9XdIdd0f2Ngx1m0RQGIh3NIfAitzkFfjUvpk7omOwBGk17Bvzlhi
 eY5VcldFX5szaPdtcAugd622pW0NMnFyRVCPMA15NZ5Ct4zvyRiv5zxlMhxu/F3o
 spmjSWzJ5TKpzjr20XSjk3g9CbbEeALloIY2MFbdalXjjWhKCGk+qyeb0qmWGRAb
 VPm32T2TzmaapFZXJrWLLi8cYnIMELGIt3L8mmH+MVzqFuVPTcn2xCNhdRPINIo=
 =ktsc
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

  User visible fixes:

  - Show progress bar in more places while doing histogram processing
    in the hists browser (Namhyung Kim)

  - Print backtrace symbols when segfault occurs in 'report' (Namhyung Kim)

  Infrastructure fixes:

  - Append callchains only when requested (Namhyung Kim)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-01 22:24:36 +01:00
Ingo Molnar 2aba73a614 This is hopefully the last vdso fix for 3.19. It should be very
safe (it just adds a volatile).
 
 I don't think it fixes an actual bug (the __getcpu calls in the
 pvclock code may not have been needed in the first place), but
 discussion on that point is ongoing.
 
 It also fixes a big performance issue in 3.18 and earlier in which
 the lsl instructions in vclock_gettime got hoisted so far up the
 function that they happened even when the function they were in was
 never called.  n 3.19, the performance issue seems to be gone due to
 the whims of my compiler and some interaction with a branch that's
 now gone.
 
 I'll hopefully have a much bigger overhaul of the pvclock code
 for 3.20, but it needs careful review.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUmduGAAoJEK9N98ZeDfrk874H/RkkP+y6/DmdKVR1dTOUQW4u
 f1wPU0/sc5xywGjNcfR3XwUuyBJyd3s81WVaE5XXHfCHnbjG2Z4CNTqga27hL1D0
 io01Q2s3dh1Y5c0cccVmJmyw//YVzMUOzGTNM9R0NKQNXmYUz6jgQaqk+wWORdD6
 JXCU3/LI5VT0fjNPLj1M9l59eC2Qg/V4GqY2xRJ1AfbwkX1CFZTcWUPb+4FScVYv
 9gds/vOoFg54MypVJD4SeIC9I8U0qcim9gV7gGFdzyDNCXS5J4P+02sEOFNu8oYy
 HVK1B0LXhswT08Ho1yRxXUhFxpqEGeGJvTlDTvwy+r/yuKE2AVBtlhLQBqMPhnY=
 =u3d2
 -----END PGP SIGNATURE-----

Merge tag 'pr-20141223-x86-vdso' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux into x86/urgent

Pull VDSO fix from Andy Lutomirski:

 "This is hopefully the last vdso fix for 3.19.  It should be very
  safe (it just adds a volatile).

  I don't think it fixes an actual bug (the __getcpu calls in the
  pvclock code may not have been needed in the first place), but
  discussion on that point is ongoing.

  It also fixes a big performance issue in 3.18 and earlier in which
  the lsl instructions in vclock_gettime got hoisted so far up the
  function that they happened even when the function they were in was
  never called.  n 3.19, the performance issue seems to be gone due to
  the whims of my compiler and some interaction with a branch that's
  now gone.

  I'll hopefully have a much bigger overhaul of the pvclock code
  for 3.20, but it needs careful review."

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-01 22:21:22 +01:00
Yongjian Xu 7824acd924 qlcnic: Fix return value in qlcnic_probe()
If the check of adapter fails and goes into the 'else' branch, the
return value 'err' should not still be zero.

Signed-off-by: Yongjian Xu <xuyongjiande@gmail.com>
Acked-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31 19:21:19 -05:00
Julia Lawall 0f113b8117 net: axienet: fix error return code
Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31 19:19:00 -05:00
Julia Lawall 3d2232f54d net: sun4i-emac: fix error return code
Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31 19:19:00 -05:00
Julia Lawall f12e77caf6 myri10ge: fix error return code
Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

The patch also modifies the test of mgp->cmd to satisfy checkpatch.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31 19:19:00 -05:00
Julia Lawall 8a0a1f840f net: Xilinx: fix error return code
Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31 19:19:00 -05:00
David S. Miller 4e4804be4e Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net
Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2014-12-31

This series contains updates to fixes for e100, igb and i40e.

John Linville fixes a typo in e100 that has been around for some time,
where an attempted revert actually inverted the test for eeprom_mdix_enabled.

Todd fixes up a code comment that should have been removed back in 2007.

Joe Perches fixes a possible memory leak in i40e which was reported by
Dan Carpenter using smatch.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31 19:17:03 -05:00
Joe Perches e3fe44c759 i40e: Fix possible memory leak in i40e_dbg_dump_desc
I didn't notice that return in the code, fix it by
adding a goto out instead to free the memory.

Fixes:

> New smatch warnings:
> drivers/net/ethernet/intel/i40e/i40e_debugfs.c:832 i40e_dbg_dump_desc() warn: possible memory leak of 'ring'

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-31 15:40:12 -08:00
Linus Torvalds 5e0f872c7d Merge branch 'upstream' of git://git.infradead.org/users/pcmoore/audit
Pull audit fix from Paul Moore:
 "One audit patch to resolve a panic/oops when recording filenames in
  the audit log, see the mail archive link below.

  The fix isn't as nice as I would like, as it involves an allocate/copy
  of the filename, but it solves the problem and the overhead should
  only affect users who have configured audit rules involving file
  names.

  We'll revisit this issue with future kernels in an attempt to make
  this suck less, but in the meantime I think this fix should go into
  the next release of v3.19-rcX.

  [ https://marc.info/?t=141986927600001&r=1&w=2 ]"

* 'upstream' of git://git.infradead.org/users/pcmoore/audit:
  audit: create private file name copies when auditing inodes
2014-12-31 14:52:18 -08:00
Linus Torvalds 7f4054836d Revert "Input: atmel_mxt_ts - use deep sleep mode when stopped"
This reverts commit 9d469d033d.

It breaks the Chromebook Pixel touchpad (and touchscreen).

Reported-by: Dirk Hohndel <dirk@hohndel.org>
Bisected-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Dyer <nick.dyer@itdev.co.uk>
Cc: Benson Leung <bleung@chromium.org>
Cc: Yufeng Shen <miletus@chromium.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: stable@vger.kernel.org  # v3.16+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-31 12:59:34 -08:00
Todd Fujinaka 2184aa3d0f igb: Remove unneeded FIXME
Remove a FIXME comment that was missed in a commit on 1/2007.

Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Reported-by: nick <xerofoify@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-31 12:11:06 -08:00
John W. Linville a3566b5290 e100: fix typo in MDI/MDI-X eeprom check in e100_phy_init
Although it doesn't explicitly say so, commit 60ffa47875 ("e100:
Fix MDIO/MDIO-X") appears to be intended to revert the earlier commit
648951451e ("e100: fixed e100 MDI/MDI-X issues").  However,
careful examination reveals that the attempted revert actually
_inverted_ the test for eeprom_mdix_enabled.  That is bound to program
a few PHYs incorrectly...

https://bugzilla.redhat.com/show_bug.cgi?id=1156417

Signed-off-by: "John W. Linville" <linville@tuxdriver.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-31 11:55:40 -08:00
Linus Torvalds a5cb2366fb nios2 fixes for v3.19-rc3
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.5 (GNU/Linux)
 
 iQIVAwUAVKNsUlWoEK+e3syCAQJbCRAArKrUo6cI5YWB9izQD9XpClfNFcPBuEpp
 f/VG8elRuZoCO0wBUPXcjGXCCTB+xkRdpOgakoLj5qZQ+prjZHx//jMUDNHcu6WC
 H3WcX9s25apquhD9yzXm4Lg6C8x+qazFSmKm14xn1LM7LtJ/9+XpAPYSiyGdMqJZ
 1bulC6PiWFuK5fZfZ4va+QrPy+OU1nMl+jygFAgBLszTTdo8t8S9+n3Iw4Yenj4s
 ChhdDQA8IhErRZxzgbv3gIfXXte9pvlfG+YCxaYhxhHEXIcnN6NFQeDd+53ozDfZ
 4+mRQXCQOY+OfQsNoWDm2ZT9n01PqSXZfWB1cITSay8ZVtOrR/6aTttpsoSeRm/u
 IALubgWy5abPCvH6woeTzk0ixskbubpYhR6AlQU9E/QTooGScF4959/AqgFs6A8S
 aKWX6Hn79D0KuEooB8V0D/pNSvaVqpGbSC6xrXbFMh/WGrN8qsfcS0eSxVACZAM7
 K37Uhap8jM76zl7Lmq0Qms0kqkp1wdPWRw69AQMIZuiagzGCqzTnBzBb06+sVyyO
 qwziE2TifePTtyQmjdLVXpzpcXe6JKlNDchw7Q8+EUHfWwsvkHo+KU5VM6SevbTc
 EYTYR49JLOkuus3dzJRUb/E0xsElYyHbr1T7Dd3wWo3mH41GqIbvztJnRI2DtJQs
 obsBKxRFI9U=
 =4rWI
 -----END PGP SIGNATURE-----

Merge tag 'nios2-fixes-v3.19-rc3' of git://git.rocketboards.org/linux-socfpga-next

Pull arch/nios2 fixes from Ley Foon Tan:

 - fix compilation error when enable CONFIG_PREEMPT

 - initialize cpuinfo.mmu variable supplied by the device tree

* tag 'nios2-fixes-v3.19-rc3' of git://git.rocketboards.org/linux-socfpga-next:
  nios2: Use preempt_schedule_irq
  nios2: Initialize cpuinfo.mmu
2014-12-31 09:44:44 -08:00
Linus Torvalds 6ca793abf8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
 "Fix a use-after-free crash in the user-space crypto API"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: af_alg - fix backlog handling
2014-12-31 09:16:17 -08:00
Tobias Klauser 1b0f44923e nios2: Use preempt_schedule_irq
Follow aa0d532605 ("ia64: Use preempt_schedule_irq") and use
preempt_schedule_irq instead of enabling/disabling interrupts and
messing around with PREEMPT_ACTIVE in the nios2 low-level preemption
code ourselves. Also get rid of the now needless re-check for
TIF_NEED_RESCHED, preempt_schedule_irq will already take care of
rescheduling.

This also fixes the following build error when building with
CONFIG_PREEMPT:

arch/nios2/kernel/built-in.o: In function `need_resched':
arch/nios2/kernel/entry.S:374: undefined reference to `PREEMPT_ACTIVE'

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Ley Foon Tan <lftan@altera.com>
2014-12-31 11:04:58 +08:00
Walter Goossens 6f3d2b0075 nios2: Initialize cpuinfo.mmu
This patch initializes the mmu field of the cpuinfo structure to the
value supplied by the devicetree.

Signed-off-by: Walter Goossens <waltergoossens@home.nl>
Acked-by: Ley Foon Tan <lftan@altera.com>
2014-12-31 10:09:32 +08:00
Linus Torvalds 9bb29b6b92 ARM: SoC fixes for 3.19-rc3
A very small set of fixes for 3.19, as everyone was out. The clocksource
 patch was something I missed for the merge window after the change that
 broke arm64 was merged through arm-soc. The other two patches are
 a fix for an undetected merge problem in mvebu and a defconfig change
 to make some exynos boards work with the normal multi_v7_defconfig.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAVKLKEGCrR//JCVInAQLWSg//TLZdOcMiNUcKa8SjeRggILdslSOJKuVG
 wLyzsAOyQ+XZFvp5KdOhBwLZwaitFxXLya0NUMGuD8c9lFylTHcg4+Lh8yOPua5b
 u319jV7YoYPRVfrwdEoPKA6R+sLLJZEj8lE5+vuEGXEig2wDb7xAzfSS3uNwBVtM
 kVVur8lYgphyz/5Ruzxexn9ORlmgULG2SFfJnOlJHsAxgaGOo51cMwR616V+UBHl
 AeX5ZcHWmGc89o04FYL3fDF0j+ReCwhSflPIOCf2KwJNHRgE/DkOCd1n4X45Hozl
 2FWgj3bD/KjZEOzapt08X4oiFZXaxl+ruGe+n7Dm7hmOj6TzLxHrWIg+E5hgbTNV
 IffuGU1SJrBH+aZl7pE/aSJ3VcFA3EiSmKiq+0tPjWrX+vWlv+e6Jr95r5VQ3Qh0
 xksTWCf9KRa6Peu/zxYBDeUkJcf96XC/GjWF+uQrew89G5B2JFz/emd5Gmtxrr0O
 Q0eOszqafSBQcKf4Z7tU+DmRKVCcVhnTdTgYZtRDizFMkpjI6gtjrCQq7g0Q8iqg
 o9gl5xyiJFVOgL1HsUUtROsBrGRXuqdAUasg2etDonXV/XMbfq6E21bxCxG+5YcT
 tes1E9w0onvXFw98M7i8q3cVcnWnvuvHZKqsvmbUGOCx0dz3ah7LbzeSZJcCNWWa
 F8e06SqZfQY=
 =JNdC
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "A very small set of fixes for 3.19, as everyone was out.

  The clocksource patch was something I missed for the merge window
  after the change that broke arm64 was merged through arm-soc.  The
  other two patches are a fix for an undetected merge problem in mvebu
  and a defconfig change to make some exynos boards work with the normal
  multi_v7_defconfig"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  Add USB_EHCI_EXYNOS to multi_v7_defconfig
  ARM: mvebu: Fix pinctrl configuration for Armada 370 DB
  clocksource: arch_timer: Only use the virtual counter (CNTVCT) on arm64
2014-12-30 17:13:13 -08:00