Prepare for treating resource group glocks as exclusive among nodes but
shared among all tasks running on a node: introduce another layer of
node-specific locking that the local tasks can use to coordinate their
accesses.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Add a rs_reserved field to struct gfs2_blkreserv to keep track of the number of
blocks reserved by this particular reservation, and a rd_reserved field to
struct gfs2_rgrpd to keep track of the total number of reserved blocks in the
resource group. Those blocks are exclusively reserved, as opposed to the
rs_requested / rd_requested blocks which are tracked in the reservation tree
(rd_rstree) and which can be stolen if necessary.
When making a reservation with gfs2_inplace_reserve, rs_reserved is set to
somewhere between ap->min_target and ap->target depending on the number of free
blocks in the resource group. When allocating blocks with gfs2_alloc_blocks,
rs_reserved is decremented accordingly. Eventually, any reserved but not
consumed blocks are returned to the resource group by gfs2_inplace_release.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
We keep track of what we've so far been referring to as reservations in
rd_rstree: the nodes in that tree indicate where in a resource group we'd
like to allocate the next couple of blocks for a particular inode. Local
processes take those as hints, but they may still "steal" blocks from those
extents, so when actually allocating a block, we must double check in the
bitmap whether that block is actually still free. Likewise, other cluster
nodes may "steal" such blocks as well.
One of the following patches introduces resource group glock sharing, i.e.,
sharing of an exclusively locked resource group glock among local processes to
speed up allocations. To make that work, we'll need to keep track of how many
blocks we've actually reserved for each inode, so we end up with two different
kinds of reservations.
Distinguish these two kinds by referring to blocks which are reserved but may
still be "stolen" as "requested". This rename also makes it more obvious that
rs_requested and rd_requested are strongly related.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In gfs2_release, check if the inode has an active reservation to avoid
unnecessary lock taking.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
If gfs2_inplace_reserve has chosen a resource group but it couldn't make a
reservation there, there are too many other reservations in that resource
group. In that case, don't even try to respect existing reservations in
gfs2_alloc_blocks.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Only pass the current reservation down to gfs2_rbm_find rather than the entire
inode; we don't need any of the other information.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Pass a non-NULL minext to gfs2_rbm_find even for single-block allocations. In
gfs2_rbm_find, also set rgd->rd_extfail_pt when a single-block allocation
fails in a resource group: there is no reason for treating that case
differently. In gfs2_reservation_check_and_update, only check how many free
blocks we have if more than one block is requested; we already know there's at
least one free block.
In addition, when allocating N blocks fails in gfs2_rbm_find, we need to set
rd_extfail_pt to N - 1 rather than N: rd_extfail_pt defines the biggest
allocation that might still succeed.
Finally, reset rd_extfail_pt when updating the resource group statistics in
update_rgrp_lvb, as we already do in gfs2_rgrp_bh_get.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Introduced a new field conn_id in TCP_Server_Info structure.
This is a non-persistent unique identifier maintained by the client
for a connection to a file server. For this, a global counter named
tcpSesNextId is maintained. On allocating a new TCP_Server_Info,
this counter is incremented and assigned.
Changed the dynamic tracepoints related to reconnects and
crediting to be more informative (with conn_id printed).
Debugging a crediting issue helped me understand the
important things to print here.
Always call dynamic tracepoints outside the scope of spinlocks.
To do this, copy out the credits and in_flight fields of the
server struct before dropping the lock.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For failure by timeout waiting for credits, changed the error
returned to the app with EBUSY, instead of ENOTSUPP. This is done
because this situation is possible even in non-buggy cases. i.e.
overloaded server can return 0 credits until done with outstanding
requests. And this feels like a better error to return to the app.
For cases of zero credits found even when there are no requests
in flight, replaced ENOTSUPP with EDEADLK, since we're avoiding
deadlock here by returning error.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We used to share the CIFS_NEG_OP flag between negotiate and
session authentication. There was an assumption in the code that
CIFS_NEG_OP is used by negotiate only. So introcuded CIFS_SESS_OP
and used it for session setup optypes.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We need to wait for outstanding writes on the page to complete before we
can update it.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Support eager writing to the server, meaning that we write the data to
cache on the server, and wait for that to complete. This ensures that we
see ENOSPC errors immediately.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We add task_work from any context, hence we need to ensure that we can
tolerate it being from IRQ context as well.
Fixes: 7cbf1722d5 ("io_uring: provide FIFO ordering for task_work")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the Fb cap is used it means the current inode is flushing the
dirty data to OSD, just defer flushing the capsnap.
URL: https://tracker.ceph.com/issues/48640
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Testing with the fscache overhaul has triggered some lockdep warnings
about circular lock dependencies involving page_mkwrite and the
mmap_lock. It'd be better to do the "real work" without the mmap lock
being held.
Change the skip_checking_caps parameter in __ceph_put_cap_refs to an
enum, and use that to determine whether to queue check_caps, do it
synchronously or not at all. Change ceph_page_mkwrite to do a
ceph_put_cap_refs_async().
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add a generic function for taking an inode reference, setting the I_WORK
bit and queueing i_work. Turn the ceph_queue_* functions into static
inline wrappers that pass in the right bit.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
A primary reason for skipping ceph_check_caps after putting the
references was to avoid the locking in ceph_check_caps during a
reconnect. __ceph_put_cap_refs can still call ceph_flush_snaps in that
case though, and that takes many of the same inconvenient locks.
Fix the logic in __ceph_put_cap_refs to skip flushing snaps when the
skip_checking_caps flag is set.
Fixes: e64f44a884 ("ceph: skip checking caps when session reconnecting and releasing reqs")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Userspace has discovered the functionality offered by SYS_kcmp and has
started to depend upon it. In particular, Mesa uses SYS_kcmp for
os_same_file_description() in order to identify when two fd (e.g. device
or dmabuf) point to the same struct file. Since they depend on it for
core functionality, lift SYS_kcmp out of the non-default
CONFIG_CHECKPOINT_RESTORE into the selectable syscall category.
Rasmus Villemoes also pointed out that systemd uses SYS_kcmp to
deduplicate the per-service file descriptor store.
Note that some distributions such as Ubuntu are already enabling
CHECKPOINT_RESTORE in their configs and so, by extension, SYS_kcmp.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3046
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> # DRM depends on kcmp
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> # systemd uses kcmp
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205220012.1983-1-chris@chris-wilson.co.uk
Add tracepoints for file I/O operations to aid in debugging of I/O errors
with zonefs.
The added tracepoints are in:
- zonefs_zone_mgmt() for tracing zone management operations
- zonefs_iomap_begin() for tracing regular file I/O
- zonefs_file_dio_append() for tracing zone-append operations
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
If this is attempted by an io-wq kthread, then return -EOPNOTSUPP as we
don't currently support that. Once we can get task_pid_ptr() doing the
right thing, then this can go away again.
Use PF_IO_WORKER for this to speciically target the io_uring workers.
Modify the /proc/self/ check to use PF_IO_WORKER as well.
Cc: stable@vger.kernel.org
Fixes: 8d4c3e76e3 ("proc: don't allow async path resolution of /proc/self components")
Reported-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It can be useful to the interpreter to know which flags are in use.
For instance, knowing if the preserve-argv[0] is in use would
allow to skip the pathname argument.
This patch uses an unused auxiliary vector, AT_FLAGS, to add a
flag to inform interpreter if the preserve-argv[0] is enabled.
Note by Helge Deller:
The real-world user of this patch is qemu-user, which needs to know
if it has to preserve the argv[0]. See Debian bug #970460.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: YunQiang Su <ysu@wavecomp.com>
URL: http://bugs.debian.org/970460
Signed-off-by: Helge Deller <deller@gmx.de>
SMB3.1.1 is the newest, and preferred dialect, and is included in
the requested dialect list by default (ie if no vers= is specified
on mount) but it should also be requested if SMB3 or later is requested
(vers=3 instead of a specific dialect: vers=2.1, vers=3.02 or vers=3.0).
Currently specifying "vers=3" only requests smb3.0 and smb3.02 but this
patch fixes it to also request smb3.1.1 dialect, as it is the newest
and most secure dialect and is a "version 3 or later" dialect (the intent
of "vers=3").
Signed-off-by: Steve French <stfrench@microsoft.com>
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
These pernet operations may depend on stuff set up or torn down in the
module init/exit functions. And they may be called at any time in
between. So it makes more sense for them to be the last to be
registered in the init function, and the first to be unregistered in the
exit function.
In particular, without this, the drc slab is being destroyed before all
the per-net drcs are shut down, resulting in an "Objects remaining in
nfsd_drc on __kmem_cache_shutdown()" warning in exit_nfsd.
Reported-by: Zhi Li <yieli@redhat.com>
Fixes: 3ba75830ce "nfsd4: drc containerization"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Fix to return PTR_ERR() error code from the error handling case instead
fo 0 in function alloc_wbufs(), as done elsewhere in this function.
Fixes: 6a98bc4614 ("ubifs: Add authentication nodes to journal")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmAmlkAACgkQxWXV+ddt
WDuwNxAAiBAhEwPllzyU86p4RMMip5pa24zu11HkTya65yGk6EFuj4zTlx/L5Fn6
JOjxwlPqaTItER1PYJ5HRdIy1Y2E4eWEiDLolvmvDCPZrfKRKhBU1MZbgXwDbp+Z
pwaJGIm5ZaXDGyuFge3bKA48BERfqxRBO3qIOZ0tzgsUFLlZ2d9EdDc99093/J6k
QzIijXQjFnvnB2MNawN1b/KQ63xqXLo2hemKcKIFCxJHm9eaet/qwGHl5iuR5ScY
bOGCWvLSkCXceartDur3msOZXur09YLyfeYmE9dj1FN3aNu97sW8VivWRrs3aglK
if51iYrrjKSnDr4SOK28S5UYdgeStb/qWWtosdcMsQVBo0t7iCnGT2psGaQCkdfG
FChqbs2uXlbJrojlelV6xbaU3S2D2MtSz5mF+I2G5MpQbj1jkhYE9ZTUQeibcd7o
l+edn/VJvVK4X0NAX8pIWJ4nFY1HqUTyfn28IQ7ymBhyyUloIoazvSkBuSWy6iy0
9aPpohOKjCw8Y3MbgcIfIEJhdK+aIKF8ZPh52+zcXQzf1OtSryVarLHsNXWm9vJ8
tHsRHCzrbLFdAXZccT6YlerzPs4+PVf44UknDbFCg7sLcG04NIGGrMXOtTHwgEZL
BEywTjAMlMDjrEXouxYAPNPnEg/NlvQGZYRvBnxrtZE4G2fxJ7o=
=7w6G
-----END PGP SIGNATURE-----
Merge tag 'for-5.11-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A regression fix caused by a refactoring in 5.11.
A corrupted superblock wouldn't be detected by checksum verification
due to wrongly placed initialization of the checksum length, thus
making memcmp always work"
* tag 'for-5.11-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: initialize fs_info::csum_size earlier in open_ctree
s390 and alpha are the only 64 bit architectures with a 32-bit ino_t.
Since this is quite unusual this causes bugs from time to time.
See e.g. commit ebce3eb2f7 ("ceph: fix inode number handling on
arches with 32-bit ino_t") for an example.
This (obviously) also prevents s390 and alpha to use 64-bit ino_t for
tmpfs. See commit b85a7a8bb5 ("tmpfs: disallow CONFIG_TMPFS_INODE64
on s390").
Therefore switch both s390 and alpha to 64-bit ino_t. This should only
have an effect on the ustat system call. To prevent ABI breakage
define struct ustat compatible to the old layout and change
sys_ustat() accordingly.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Be nice and prune these upfront, in case the ring is being shared and
one of the tasks is going away. This is a bit more important now that
we account the allocations.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have three different ones, put it in a helper for easy calling. This
is in preparation for doing it outside of ring freeing as well. With
that in mind, also ensure that we do the proper locking for safe calling
from a context where the ring it still live.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No changes in this patch, just allows a caller to pass in a targeted
task that we must match for freeing requests in the cache.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=vJKS
-----END PGP SIGNATURE-----
Merge tag '5.11-rc7-smb3-github' of git://github.com/smfrench/smb3-kernel
Pull cifs fixes from Steve French:
"Four small smb3 fixes to the new mount API (including a particularly
important one for DFS links).
These were found in testing this week of additional DFS scenarios, and
a user testing of an apache container problem"
* tag '5.11-rc7-smb3-github' of git://github.com/smfrench/smb3-kernel:
cifs: Set CIFS_MOUNT_USE_PREFIX_PATH flag on setting cifs_sb->prepath.
cifs: In the new mount api we get the full devname as source=
cifs: do not disable noperm if multiuser mount option is not provided
cifs: fix dfs-links
Let's allow mounting readonly partition. We're able to recovery later once we
have it as read-write back.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
By default, kernel threads have init_fs and init_files assigned. In the
past, this has triggered security problems, as commands that don't ask
for (and hence don't get assigned) fs/files from the originating task
can then attempt path resolution etc with access to parts of the system
they should not be able to.
Rather than add checks in the fs code for misuse, just set these to
NULL. If we do attempt to use them, then the resulting code will oops
rather than provide access to something that it should not permit.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
An inode is allowed to have ubifs_xattr_max_cnt() xattrs, so we must
complain only when an inode has more xattrs, having exactly
ubifs_xattr_max_cnt() xattrs is fine.
With this the maximum number of xattrs can be created without hitting
the "has too many xattrs" warning when removing it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
An earlier commit moved out some functions to not be inlined by gcc, but
after some other rework to remove one of those, clang started inlining
the other one and ran into the same problem as gcc did before:
fs/ubifs/replay.c:1174:5: error: stack frame size of 1152 bytes in function 'ubifs_replay_journal' [-Werror,-Wframe-larger-than=]
Mark the function as noinline_for_stack to ensure it doesn't happen
again.
Fixes: f80df38512 ("ubifs: use crypto_shash_tfm_digest()")
Fixes: eb66eff663 ("ubifs: replay: Fix high stack usage")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
When crypto_shash_digestsize() fails, c->hmac_tfm
has not been freed before returning, which leads
to memleak.
Fixes: 49525e5eec ("ubifs: Add helper functions for authentication support")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
clang static analysis reports this problem
fs/jffs2/summary.c:794:31: warning: Use of memory after it is freed
c->summary->sum_list_head = temp->u.next;
^~~~~~~~~~~~
In jffs2_sum_write_data(), in a loop summary data is handles a node at
a time. When it has written out the node it is removed the summary list,
and the node is deleted. In the corner case when a
JFFS2_FEATURE_RWCOMPAT_COPY is seen, a call is made to
jffs2_sum_disable_collecting(). jffs2_sum_disable_collecting() deletes
the whole list which conflicts with the loop's deleting the list by parts.
To preserve the old behavior of stopping the write midway, bail out of
the loop after disabling summary collection.
Fixes: 6171586a7a ("[JFFS2] Correct handling of JFFS2_FEATURE_RWCOMPAT_COPY nodes.")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This collects all of them together and makes it possible to
e.g. exclude it from slub debugging.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
-----BEGIN PGP SIGNATURE-----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=y7ZL
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.11-2021-02-12' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"Revert of a patch from this release that caused a regression"
* tag 'io_uring-5.11-2021-02-12' of git://git.kernel.dk/linux-block:
Revert "io_uring: don't take fs for recvmsg/sendmsg"
Invalid req->flags are tolerated by free/put well, avoid this dancing
needlessly presetting it to zero, and then not even resetting but
modifying it, i.e. "|=".
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Indirectly io_req_find_next() is called for every request, optimise the
check by testing flags as it was long before -- __io_req_find_next()
tolerates false-positives well (i.e. link==NULL), and those should be
really rare.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_sq_thread_acquire_mm_files() can find a PF_EXITING task only when
it's called from task_work context. Don't check it in all other cases,
that are when we're in io_uring_enter().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Make the nVHE EL2 object relocatable, resulting in much more
maintainable code
- Handle concurrent translation faults hitting the same page
in a more elegant way
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Allow the disabling of symbol export from assembly code
- Simplification of the early init hypercall handling
-----BEGIN PGP SIGNATURE-----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=6EwV
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.12
- Make the nVHE EL2 object relocatable, resulting in much more
maintainable code
- Handle concurrent translation faults hitting the same page
in a more elegant way
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Allow the disabling of symbol export from assembly code
- Simplification of the early init hypercall handling
User reported that btrfs-progs misc-tests/028-superblock-recover fails:
[TEST/misc] 028-superblock-recover
unexpected success: mounted fs with corrupted superblock
test failed for case 028-superblock-recover
The test case expects that a broken image with bad superblock will be
rejected to be mounted. However, the test image just passed csum check
of superblock and was successfully mounted.
Commit 55fc29bed8 ("btrfs: use cached value of fs_info::csum_size
everywhere") replaces all calls to btrfs_super_csum_size by
fs_info::csum_size. The calls include the place where fs_info->csum_size
is not initialized. So btrfs_check_super_csum() passes because memcmp()
with len 0 always returns 0.
Fix it by caching csum size in btrfs_fs_info::csum_size once we know the
csum type in superblock is valid in open_ctree().
Link: https://github.com/kdave/btrfs-progs/issues/250
Fixes: 55fc29bed8 ("btrfs: use cached value of fs_info::csum_size everywhere")
Signed-off-by: Su Yue <l@damenly.su>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove io_consume_sqe() and inline it back into io_get_sqe(). It
requires req dealloc on error, but in exchange we get cleaner
io_submit_sqes() and better locality for cached_sq_head.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Do a little trick in io_ring_ctx_free() briefly taking uring_lock, that
will wait for everyone currently holding it, so we can skip pinning ctx
with ctx->refs for __io_req_task_submit(), which is executed and loses
its refs/reqs while holding the lock.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't hand code io_req_task_queue() inside of io_async_buf_func(), just
call it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are two reasons for this. First is to optimise
io_sq_thread_acquire_mm_files() for non-SQPOLL case, which currently do
too many checks and function calls in the hot path, e.g. in
io_init_req().
The second is to not grab mm/files when there are not needed. As
__io_queue_sqe() issues only one request now, we can reuse
io_sq_thread_acquire_mm_files() instead of unconditional acquire
mm/files.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__io_queue_sqe() tries to issue as much requests of a link as it can,
and uses io_put_req_find_next() to extract a next one, targeting inline
completed requests. As now __io_queue_sqe() is always used together with
struct io_comp_state, it leaves next propagation only a small window and
only for async reqs, that doesn't justify its existence.
Remove it, make __io_queue_sqe() to issue only a head request. It
simplifies the code and will allow other optimisations.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Completion and submission states are now coupled together, it's weird to
get one from argument and another from ctx, do it consistently for
io_req_free_batch(). It's also faster as we already have @state cached
in registers.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As of [1], we no longer want EXT4_KUNIT_TESTS and others to `select`
their deps. This means it can get harder to get all the right things
selected as we gain more tests w/ more deps over time.
This patch (and [2]) proposes we store kunitconfig fragments in-tree to
represent sets of tests. (N.B. right now we only have one ext4 test).
There's still a discussion to be had about how to have a hierarchy of
these files (e.g. if one wanted to test all of fs/, not just fs/ext4).
But this fragment would likely be a leaf node and isn't blocked on
deciding if we want `import` statements and the like.
Usage
=====
Before [2] (on its way to being merged):
$ cp fs/ext4/.kunitconfig .kunit/
$ ./tools/testing/kunit/kunit.py run
After [2]:
$ ./tools/testing/kunit/kunit.py run --kunitconfig=fs/ext4/.kunitconfig
".kunitconfig" vs "kunitconfig"
===============================
See also: commit 14ee5cfd45 ("kunit: Rename 'kunitconfig' to '.kunitconfig'").
* The bit about .gitignore exluding it by default is now a con, however.
* But there are a lot of directories with files that begin with "k" and
so this could cause some annoyance w/ tab completion*
* This is the name kunit.py expects right now, so some people are used
to .kunitconfig over "kunitconfig"
[1] https://lore.kernel.org/linux-ext4/20210122110234.2825685-1-geert@linux-m68k.org/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/commit/?h=kunit&id=243180f5924ed27ea417db39feb7f9691777688e
* 372/5556 directories isn't too much, but still not a small number:
$ find -type f -name 'k*' | xargs dirname | sort -u | wc -l
372
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Link: https://lore.kernel.org/r/20210210013206.136227-1-dlatypov@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
EXT4_KUNIT_TESTS selects EXT4_FS, thus enabling an optional feature the
user may not want to enable. Fix this by making the test depend on
EXT4_FS instead.
Fixes: 1cbeab1b24 ("ext4: add kunit test for decoding extended timestamps")
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20210122110234.2825685-1-geert@linux-m68k.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
__io_complete_rw() casts request to kiocb for it to be immediately
container_of()'ed by io_complete_rw_common(). And the last function's name
doesn't do a great job of illuminating its purposes, so just inline it in
its only user.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We pass return code into io_rw_reissue() only to be able to check if it's
-EAGAIN. That's not the cleanest approach and may prevent inlining of the
non-EAGAIN fast path, so do it at call sites.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't stash -EAGAIN'ed iopoll requests into a list to reissue it later,
do it eagerly. It removes overhead on keeping and checking that list,
and allows in case of failure for these requests to be completed through
normal iopoll completion path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_req_free_batch_finish() is final and does not permit struct req_batch
to be reused without re-init. To be more consistent don't clear ->task
there.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We recently added the submit side req cache, but it was placed at the
end of the struct. Move it near the other submission state for better
memory placement, and reshuffle a few other members at the same time.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The left shift of int 32 bit integer constant 1 is evaluated using 32 bit
arithmetic and then assigned to a signed 64 bit integer. In the case where
l2nb is 32 or more this can lead to an overflow. Avoid this by shifting
the value 1LL instead.
Addresses-Coverity: ("Uninitentional integer overflow")
Fixes: b40c2e665c ("fs/jfs: TRIM support for JFS Filesystem")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
While debugging another issue today, Steve and I noticed that if a
subdir for a file share is already mounted on the client, any new
mount of any other subdir (or the file share root) of the same share
results in sharing the cifs superblock, which e.g. can result in
incorrect device name.
While setting prefix path for the root of a cifs_sb,
CIFS_MOUNT_USE_PREFIX_PATH flag should also be set.
Without it, prepath is not even considered in some places,
and output of "mount" and various /proc/<>/*mount* related
options can be missing part of the device name.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
so we no longer need to handle or parse the UNC= and prefixpath=
options that mount.cifs are generating.
This also fixes a bug in the mount command option where the devname
would be truncated into just //server/share because we were looking
at the truncated UNC value and not the full path.
I.e. in the mount command output the devive //server/share/path
would show up as just //server/share
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The assert in xfs_btree_del_cursor() checks that the bmapbt block
allocation field has been handled correctly before the cursor is
freed. This field is used for accurate calculation of indirect block
reservation requirements (for delayed allocations), for example.
generic/019 reproduces a scenario where this assert fails because
the filesystem has shutdown while in the middle of a bmbt record
insertion. This occurs after a bmbt block has been allocated via the
cursor but before the higher level bmap function (i.e.
xfs_bmap_add_extent_hole_real()) completes and resets the field.
Update the assert to accommodate the transient state if the
filesystem has shutdown. While here, clean up the indentation and
comments in the function.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
We use the assigned slot in io_sqe_file_register(), and a previous
patch moved the assignment to after we have called it. This isn't
super pretty, and will get cleaned up in the future. For now, fix
the regression by restoring the previous assignment/clear of the
file_slot.
Fixes: ea64ec02b3 ("io_uring: deduplicate file table slot calculation")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, although set_bit() & test_bit() pairs are used as a fast-
path for initialized configurations. However, these atomic ops are
actually relaxed forms. Instead, load-acquire & store-release form is
needed to make sure uninitialized fields won't be observed in advance
here (yet no such corresponding bitops so use full barriers instead.)
Link: https://lore.kernel.org/r/20210209130618.15838-1-hsiangkao@aol.com
Fixes: 62dc45979f ("staging: erofs: fix race of initializing xattrs of a inode at the same time")
Fixes: 152a333a58 ("staging: erofs: add compacted compression indexes support")
Cc: <stable@vger.kernel.org> # 5.3+
Reported-by: Huang Jianan <huangjianan@oppo.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
fs/xfs/xfs_log.c:1062:9-10: WARNING: return of 0/1 in function 'xfs_log_need_covered' with return type bool
Return statements in functions returning bool should use
true/false instead of 1/0.
Generated by: scripts/coccinelle/misc/boolreturn.cocci
Fixes: 37444fc4cc ("xfs: lift writable fs check up into log worker task")
CC: Brian Foster <bfoster@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
XFS triggers an iomap warning in the write fault path due to a
!PageUptodate() page if a write fault happens to occur on a page
that recently failed writeback. The iomap writeback error handling
code can clear the Uptodate flag if no portion of the page is
submitted for I/O. This is reproduced by fstest generic/019, which
combines various forms of I/O with simulated disk failures that
inevitably lead to filesystem shutdown (which then unconditionally
fails page writeback).
This is a regression introduced by commit f150b42343 ("xfs: split
the iomap ops for buffered vs direct writes") due to the removal of
a shutdown check and explicit error return in the ->iomap_begin()
path used by the write fault path. The explicit error return
historically translated to a SIGBUS, but now carries on with iomap
processing where it complains about the unexpected state. Restore
the shutdown check to xfs_buffered_write_iomap_begin() to restore
historical behavior.
Fixes: f150b42343 ("xfs: split the iomap ops for buffered vs direct writes")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The variable ret is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Fixes: b63534c41e ("io_uring: re-issue block requests that failed because of resources")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We park SQPOLL task before going into io_uring_cancel_files(), so the
task won't run task_works including those that might be important for
the cancellation passes. In this case it's io_poll_remove_one(), which
frees requests via io_put_req_deferred().
Unpark it for while waiting, it's ok as we disable submissions
beforehand, so no new requests will be generated.
INFO: task syz-executor893:8493 blocked for more than 143 seconds.
Call Trace:
context_switch kernel/sched/core.c:4327 [inline]
__schedule+0x90c/0x21a0 kernel/sched/core.c:5078
schedule+0xcf/0x270 kernel/sched/core.c:5157
io_uring_cancel_files fs/io_uring.c:8912 [inline]
io_uring_cancel_task_requests+0xe70/0x11a0 fs/io_uring.c:8979
__io_uring_files_cancel+0x110/0x1b0 fs/io_uring.c:9067
io_uring_files_cancel include/linux/io_uring.h:51 [inline]
do_exit+0x2fe/0x2ae0 kernel/exit.c:780
do_group_exit+0x125/0x310 kernel/exit.c:922
__do_sys_exit_group kernel/exit.c:933 [inline]
__se_sys_exit_group kernel/exit.c:931 [inline]
__x64_sys_exit_group+0x3a/0x50 kernel/exit.c:931
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Cc: stable@vger.kernel.org # 5.5+
Reported-by: syzbot+695b03d82fa8e4901b06@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 10cad2c40d.
Petr reports that with this commit in place, io_uring fails the chroot
test (CVE-202-29373). We do need to retain ->fs for send/recvmsg, so
revert this commit.
Reported-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since 5.10, splice() or sendfile() to NILFS2 return EINVAL. This was
caused by commit 36e2c7421f ("fs: don't allow splice read/write
without explicit ops").
This patch initializes the splice_write field in file_operations, like
most file systems do, to restore the functionality.
Link: https://lkml.kernel.org/r/1612784101-14353-1-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Joachim Henke <joachim.henke@t-systems.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org> [5.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zoned block devices have different granularity constraints for write
operations into sequential zones. E.g. ZBC and ZAC devices require that
writes be aligned to the device physical block size while NVMe ZNS
devices allow logical block size aligned write operations. To correctly
handle such difference, use the device zone write granularity limit to
set the block size of a zonefs volume, thus allowing the smallest
possible write unit for all zoned device types.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@edc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of imposing rlimit memlock limits for the rings themselves,
ensure that we account them properly under memcg with __GFP_ACCOUNT.
We retain rlimit memlock for registered buffers, this is just for the
ring arrays themselves.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is the last class of requests that cannot utilize the req alloc
cache. Add a per-ctx req cache that is protected by the completion_lock,
and refill our submit side cache when it gets over our batch count.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Awhile there are requests in the allocation cache -- use them, only if
those ended go for the stashed memory in comp.free_list. As list
manipulation are generally heavy and are not good for caches, flush them
all or as much as can in one go.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: return success/failure from io_flush_cached_reqs()]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__io_queue_sqe() is always called with a non-NULL comp_state, which is
taken directly from context. Don't pass it around but infer from ctx.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
task_work is run without utilizing the req alloc cache, so any deferred
items don't get to take advantage of either the alloc or free side of it.
With task_work now being wrapped by io_uring, we can use the ctx
completion state to both use the req cache and the completion flush
batching.
With this, the only request type that cannot take advantage of the req
cache is IRQ driven IO for regular files / block devices. Anything else,
including IOPOLL polled IO to those same tyes, will take advantage of it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
task_work is a LIFO list, due to how it's implemented as a lockless
list. For long chains of task_work, this can be problematic as the
first entry added is the last one processed. Similarly, we'd waste
a lot of CPU cycles reversing this list.
Wrap the task_work so we have a single task_work entry per task per
ctx, and use that to run it in the right order.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that we have the submit_state in the ring itself, we can have io_kiocb
allocations that are persistent across invocations. This reduces the time
spent doing slab allocations and frees.
[sil: rebased]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make io_req_free_batch(), which is used for inline executed requests and
IOPOLL, to return requests back into the allocation cache, so avoid
most of kmalloc()/kfree() for those cases.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently batch free handles request memory freeing and ctx ref putting
together. Separate them and use different counters, that will be needed
for reusing reqs memory.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove fallback_req for now, it gets in the way of other changes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_submit_flush_completions() does completion batching, but may also use
free batching as iopoll does. The main beneficiaries should be buffered
reads/writes and send/recv.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reincarnation of an old patch that replaces a list in struct
io_compl_batch with an array. It's needed to avoid hooking requests via
their compl.list, because it won't be always available in the future.
It's also nice to split io_submit_flush_completions() to avoid free
under locks and remove unlock/lock with a long comment describing when
it can be done.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As now submit_state is retained across syscalls, we can save ourself
from initialising it from ground up for each io_submit_sqes(). Set some
fields during ctx allocation, and just keep them always consistent.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: remove unnecessary zeroing of ctx members]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
completion state is closely bound to ctx, we don't need to store ctx
inside as we always have it around to pass to flush.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
struct io_submit_state is quite big (168 bytes) and going to grow. It's
better to not keep it on stack as it is now. Move it to context, it's
always protected by uring_lock, so it's fine to have only one instance
of it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no reason to drag io_comp_state into opcode handlers, we just
need a flag and the actual work will be done in __io_queue_sqe().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When starting an iomap write, gfs2_quota_lock_check -> gfs2_quota_lock
-> gfs2_quota_hold is called from gfs2_iomap_begin. At the end of the
write, before unlocking the quotas, punch_hole -> gfs2_quota_hold can be
called again in gfs2_iomap_end, which is incorrect and leads to a failed
assertion. Instead, move the call to gfs2_quota_unlock before the call
to punch_hole to fix that.
Fixes: 64bc06bb32 ("gfs2: iomap buffered write support")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Fixes small regression in implementation of new mount API.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reported-by: Hyunchul Lee <hyc.lee@gmail.com>
Tested-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make opcode handler interfaces a bit more consistent by always passing
in issue flags. Bulky but pretty easy and mechanical change.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace bool force_nonblock with flags. It has a long standing goal of
differentiating context from which we execute. Currently we have some
subtle places where some invariants, like holding of uring_lock, are
subtly inferred.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As with s390, alpha is a 64-bit architecture with a 32-bit ino_t. With
CONFIG_TMPFS_INODE64=y tmpfs mounts will get 64-bit inode numbers and
display "inode64" in the mount options, whereas passing "inode64" in the
mount options will fail. This leads to erroneous behaviours such as
this:
# mkdir mnt
# mount -t tmpfs nodev mnt
# mount -o remount,rw mnt
mount: /home/ubuntu/mnt: mount point not mounted or bad option.
Prevent CONFIG_TMPFS_INODE64 from being selected on alpha.
Link: https://lkml.kernel.org/r/20210208215726.608197-1-seth.forshee@canonical.com
Fixes: ea3271f719 ("tmpfs: support 64-bit inums per-sb")
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: <stable@vger.kernel.org> [5.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently there is an assumption in tmpfs that 64-bit architectures also
have a 64-bit ino_t. This is not true on s390 which has a 32-bit ino_t.
With CONFIG_TMPFS_INODE64=y tmpfs mounts will get 64-bit inode numbers
and display "inode64" in the mount options, but passing the "inode64"
mount option will fail. This leads to the following behavior:
# mkdir mnt
# mount -t tmpfs nodev mnt
# mount -o remount,rw mnt
mount: /home/ubuntu/mnt: mount point not mounted or bad option.
As mount sees "inode64" in the mount options and thus passes it in the
options for the remount.
So prevent CONFIG_TMPFS_INODE64 from being selected on s390.
Link: https://lkml.kernel.org/r/20210205230620.518245-1-seth.forshee@canonical.com
Fixes: ea3271f719 ("tmpfs: support 64-bit inums per-sb")
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Hugh Dickins <hughd@google.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: <stable@vger.kernel.org> [5.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sysbot has reported a warning where a kmalloc() attempt exceeds the
maximum limit. This has been identified as corruption of the xattr_ids
count when reading the xattr id lookup table.
This patch adds a number of additional sanity checks to detect this
corruption and others.
1. It checks for a corrupted xattr index read from the inode. This could
be because the metadata block is uncompressed, or because the
"compression" bit has been corrupted (turning a compressed block
into an uncompressed block). This would cause an out of bounds read.
2. It checks against corruption of the xattr_ids count. This can either
lead to the above kmalloc failure, or a smaller than expected
table to be read.
3. It checks the contents of the index table for corruption.
[phillip@squashfs.org.uk: fix checkpatch issue]
Link: https://lkml.kernel.org/r/270245655.754655.1612770082682@webmail.123-reg.co.uk
Link: https://lkml.kernel.org/r/20210204130249.4495-5-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: syzbot+2ccea6339d368360800d@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sysbot has reported an "slab-out-of-bounds read" error which has been
identified as being caused by a corrupted "ino_num" value read from the
inode. This could be because the metadata block is uncompressed, or
because the "compression" bit has been corrupted (turning a compressed
block into an uncompressed block).
This patch adds additional sanity checks to detect this, and the
following corruption.
1. It checks against corruption of the inodes count. This can either
lead to a larger table to be read, or a smaller than expected
table to be read.
In the case of a too large inodes count, this would often have been
trapped by the existing sanity checks, but this patch introduces
a more exact check, which can identify too small values.
2. It checks the contents of the index table for corruption.
[phillip@squashfs.org.uk: fix checkpatch issue]
Link: https://lkml.kernel.org/r/527909353.754618.1612769948607@webmail.123-reg.co.uk
Link: https://lkml.kernel.org/r/20210204130249.4495-4-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: syzbot+04419e3ff19d2970ea28@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sysbot has reported a number of "slab-out-of-bounds reads" and
"use-after-free read" errors which has been identified as being caused
by a corrupted index value read from the inode. This could be because
the metadata block is uncompressed, or because the "compression" bit has
been corrupted (turning a compressed block into an uncompressed block).
This patch adds additional sanity checks to detect this, and the
following corruption.
1. It checks against corruption of the ids count. This can either
lead to a larger table to be read, or a smaller than expected
table to be read.
In the case of a too large ids count, this would often have been
trapped by the existing sanity checks, but this patch introduces
a more exact check, which can identify too small values.
2. It checks the contents of the index table for corruption.
Link: https://lkml.kernel.org/r/20210204130249.4495-3-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: syzbot+b06d57ba83f604522af2@syzkaller.appspotmail.com
Reported-by: syzbot+c021ba012da41ee9807c@syzkaller.appspotmail.com
Reported-by: syzbot+5024636e8b5fd19f0f19@syzkaller.appspotmail.com
Reported-by: syzbot+bcbc661df46657d0fa4f@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Squashfs: fix BIO migration regression and add sanity checks".
Patch [1/4] fixes a regression introduced by the "migrate from
ll_rw_block usage to BIO" patch, which has produced a number of
Sysbot/Syzkaller reports.
Patches [2/4], [3/4], and [4/4] fix a number of filesystem corruption
issues which have produced Sysbot reports in the id, inode and xattr
lookup code.
Each patch has been tested against the Sysbot reproducers using the
given kernel configuration. They have the appropriate "Reported-by:"
lines added.
Additionally, all of the reproducer filesystems are indirectly fixed by
patch [4/4] due to the fact they all have xattr corruption which is now
detected there.
Additional testing with other configurations and architectures (32bit,
big endian), and normal filesystems has also been done to trap any
inadvertent regressions caused by the additional sanity checks.
This patch (of 4):
This is a regression introduced by the patch "migrate from ll_rw_block
usage to BIO".
Sysbot/Syskaller has reported a number of "out of bounds writes" and
"unable to handle kernel paging request in squashfs_decompress" errors
which have been identified as a regression introduced by the above
patch.
Specifically, the patch removed the following sanity check
if (length < 0 || length > output->length ||
(index + length) > msblk->bytes_used)
This check did two things:
1. It ensured any reads were not beyond the end of the filesystem
2. It ensured that the "length" field read from the filesystem
was within the expected maximum length. Without this any
corrupted values can over-run allocated buffers.
Link: https://lkml.kernel.org/r/20210204130249.4495-1-phillip@squashfs.org.uk
Link: https://lkml.kernel.org/r/20210204130249.4495-2-phillip@squashfs.org.uk
Fixes: 93e72b3c61 ("squashfs: migrate from ll_rw_block usage to BIO")
Reported-by: syzbot+6fba78f99b9afd4b5634@syzkaller.appspotmail.com
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Philippe Liard <pliard@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes a regression following dfs links that was introduced in the
patch series for the new mount api.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
The reference count of the old buffer head should be decremented on path
that fails to get the new buffer head.
Fixes: 6b4657667b ("fs/affs: add rename exchange")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, the follow_pfn function is exported for modules but
follow_pte is not. However, follow_pfn is very easy to misuse,
because it does not provide protections (so most of its callers
assume the page is writable!) and because it returns after having
already unlocked the page table lock.
Provide instead a simplified version of follow_pte that does
not have the pmdpp and range arguments. The older version
survives as follow_invalidate_pte() for use by fs/dax.c.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This final patch adds the ZONED incompat flag to the supported flags
and enables to mount ZONED flagged file system.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the zoned filesystem requires sequential write out of metadata, we
cannot proceed with a hole in tree-log pages. When such a hole exists,
btree_write_cache_pages() will return -EAGAIN. This happens when someone,
e.g., a concurrent transaction commit, writes a dirty extent in this
tree-log commit.
If we are not going to wait for the extents, we can hope the concurrent
writing fills the hole for us. So, we can ignore the error in this case and
hope the next write will succeed.
If we want to wait for them and got the error, we cannot wait for them
because it will cause a deadlock. So, let's bail out to a full commit in
this case.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the 3/3 patch to enable tree-log on zoned filesystems.
The allocation order of nodes of "fs_info->log_root_tree" and nodes of
"root->log_root" is not the same as the writing order of them. So, the
writing causes unaligned write errors.
Reorder the allocation of them by delaying allocation of the root node of
"fs_info->log_root_tree," so that the node buffers can go out sequentially
to devices.
Cc: Filipe Manana <fdmanana@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the 2/3 patch to enable tree-log on zoned filesystems.
Since we can start more than one log transactions per subvolume
simultaneously, nodes from multiple transactions can be allocated
interleaved. Such mixed allocation results in non-sequential writes at
the time of a log transaction commit. The nodes of the global log root
tree (fs_info->log_root_tree), also have the same problem with mixed
allocation.
Serializes log transactions by waiting for a committing transaction when
someone tries to start a new transaction, to avoid the mixed allocation
problem. We must also wait for running log transactions from another
subvolume, but there is no easy way to detect which subvolume root is
running a log transaction. So, this patch forbids starting a new log
transaction when other subvolumes already allocated the global log root
tree.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the 1/3 patch to enable tree log on zoned filesystems.
The tree-log feature does not work on a zoned filesystem as is. Blocks for
a tree-log tree are allocated mixed with other metadata blocks and btrfs
writes and syncs the tree-log blocks to devices at the time of fsync(),
which has a different timing than a global transaction commit. As a
result, both writing tree-log blocks and writing other metadata blocks
become non-sequential writes that zoned filesystems must avoid.
Introduce a dedicated block group for tree-log blocks, so that tree-log
blocks and other metadata blocks can be separate write streams. As a
result, each write stream can now be written to devices separately.
"fs_info->treelog_bg" tracks the dedicated block group and assigns
"treelog_bg" on-demand on tree-log block allocation time.
This commit extends the zoned block allocator to use the block group.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a preparation patch for the next patch. Split alloc_log_tree()
into two parts. The first one allocating the tree structure, remains in
alloc_log_tree() and the second part allocating the tree node, which is
moved into btrfs_alloc_log_tree_node().
Also export the latter part is to be used in the next patch.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When a bad checksum is found and if the filesystem has a mirror of the
damaged data, we read the correct data from the mirror and writes it to
damaged blocks. This however, violates the sequential write constraints
of a zoned block device.
We can consider three methods to repair an IO failure in zoned filesystems:
(1) Reset and rewrite the damaged zone
(2) Allocate new device extent and replace the damaged device extent to
the new extent
(3) Relocate the corresponding block group
Method (1) is most similar to a behavior done with regular devices.
However, it also wipes non-damaged data in the same device extent, and
so it unnecessary degrades non-damaged data.
Method (2) is much like device replacing but done in the same device. It
is safe because it keeps the device extent until the replacing finish.
However, extending device replacing is non-trivial. It assumes
"src_dev->physical == dst_dev->physical". Also, the extent mapping
replacing function should be extended to support replacing device extent
position in one device.
Method (3) invokes relocation of the damaged block group and is
straightforward to implement. It relocates all the mirrored device
extents, so it potentially is a more costly operation than method (1) or
(2). But it relocates only used extents which reduce the total IO size.
Let's apply method (3) for now. In the future, we can extend device-replace
and apply method (2).
For protecting a block group gets relocated multiple time with multiple
IO errors, this commit introduces "relocating_repair" bit to show it's
now relocating to repair IO failures. Also it uses a new kthread
"btrfs-relocating-repair", not to block IO path with relocating process.
This commit also supports repairing in the scrub process.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently fallocate() is disabled on a zoned filesystem. Since current
relocation process relies on preallocation to move file data extents, it
must be handled differently.
On a zoned filesystem, we just truncate the inode to the size that we
wanted to pre-allocate. Then, we flush dirty pages on the file before
finishing the relocation process. run_delalloc_zoned() will handle all
the allocations and submit IOs to the underlying layers.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is 4/4 patch to implement device-replace on zoned filesystems.
Even after the copying is done, the write pointers of the source device
and the destination device may not be synchronized. For example, when
the last allocated extent is freed before device-replace process, the
extent is not copied, leaving a hole there.
Synchronize the write pointers by writing zeroes to the destination
device.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is 3/4 patch to implement device-replace on zoned filesystems.
This commit implements copying. To do this, it tracks the write pointer
during the device replace process. As device-replace's copy process is
smart enough to only copy used extents on the source device, we have to
fill the gap to honor the sequential write requirement in the target
device.
The device-replace process on zoned filesystems must copy or clone all
the extents in the source device exactly once. So, we need to ensure
allocations started just before the dev-replace process to have their
corresponding extent information in the B-trees.
finish_extent_writes_for_zoned() implements that functionality, which
basically is the removed code in the commit 042528f8d8 ("Btrfs: fix
block group remaining RO forever after error during device replace").
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is 2/4 patch to implement device replace for zoned filesystems.
In zoned mode, a block group must be either copied (from the source
device to the target device) or cloned (to both devices).
Implement the cloning part. If a block group targeted by an IO is marked
to copy, we should not clone the IO to the destination device, because
the block group is eventually copied by the replace process.
This commit also handles cloning of device reset.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the 1/4 patch to support device-replace on zoned filesystems.
We have two types of IOs during the device replace process. One is an IO
to "copy" (by the scrub functions) all the device extents from the source
device to the destination device. The other one is an IO to "clone" (by
handle_ops_on_dev_replace()) new incoming write IOs from users to the
source device into the target device.
Cloning incoming IOs can break the sequential write rule in on target
device. When a write is mapped in the middle of a block group, the IO is
directed to the middle of a target device zone, which breaks the
sequential write requirement.
However, the cloning function cannot be disabled since incoming IOs
targeting already copied device extents must be cloned so that the IO is
executed on the target device.
We cannot use dev_replace->cursor_{left,right} to determine whether a bio
is going to a not yet copied region. Since we have a time gap between
finishing btrfs_scrub_dev() and rewriting the mapping tree in
btrfs_dev_replace_finishing(), we can have a newly allocated device extent
which is never cloned nor copied.
So the point is to copy only already existing device extents. This patch
introduces mark_block_group_to_copy() to mark existing block groups as a
target of copying. Then, handle_ops_on_dev_replace() and dev-replace can
check the flag to do their job.
Also, btrfs_finish_block_group_to_copy() will check if the copied stripe
is the last stripe in the block group. With the last stripe copied,
the to_copy flag is finally disabled. Afterwards we can safely clone
incoming IOs on this block group.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On zoned filesystems, btrfs uses per-fs zoned_meta_io_lock to serialize
the metadata write IOs.
Even with this serialization, write bios sent from btree_write_cache_pages
can be reordered by async checksum workers as these workers are per CPU
and not per zone.
To preserve write bio ordering, we disable async metadata checksum on a
zoned filesystem. This does not result in lower performance with HDDs as
a single CPU core is fast enough to do checksum for a single zone write
stream with the maximum possible bandwidth of the device. If multiple
zones are being written simultaneously, HDD seek overhead lowers the
achievable maximum bandwidth, resulting again in a per zone checksum
serialization not affecting the performance.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When truncating a file, file buffers which have already been allocated
but not yet written may be truncated. Truncating these buffers could
cause breakage of a sequential write pattern in a block group if the
truncated blocks are for example followed by blocks allocated to another
file. To avoid this problem, always wait for write out of all unwritten
buffers before proceeding with the truncate execution.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We cannot use zone append for writing metadata, because the B-tree nodes
have references to each other using logical address. Without knowing
the address in advance, we cannot construct the tree in the first place.
So we need to serialize write IOs for metadata.
We cannot add a mutex around allocation and submission because metadata
blocks are allocated in an earlier stage to build up B-trees.
Add a zoned_meta_io_lock and hold it during metadata IO submission in
btree_write_cache_pages() to serialize IOs.
Furthermore, this adds a per-block group metadata IO submission pointer
"meta_write_pointer" to ensure sequential writing, which can break when
attempting to write back blocks in an unfinished transaction. If the
writing out failed because of a hole and the write out is for data
integrity (WB_SYNC_ALL), it returns EAGAIN.
A caller like fsync() code should handle this properly e.g. by falling
back to a full transaction commit.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If more than one IO is issued for one file extent, these IO can be
written to separate regions on a device. Since we cannot map one file
extent to such a separate area on a zoned filesystem, we need to follow
the "one IO == one ordered extent" rule.
The normal buffered, uncompressed and not pre-allocated write path (used
by cow_file_range()) sometimes does not follow this rule. It can write a
part of an ordered extent when specified a region to write e.g., when
its called from fdatasync().
Introduce a dedicated (uncompressed buffered) data write path for zoned
filesystems, that will COW the region and write it at once.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Likewise to buffered IO, enable zone append writing for direct IO when
its used on a zoned block device.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable zone append writing for zoned mode. When using zone append, a
bio is issued to the start of a target zone and the device decides to
place it inside the zone. Upon completion the device reports the actual
written position back to the host.
Three parts are necessary to enable zone append mode. First, modify the
bio to use REQ_OP_ZONE_APPEND in btrfs_submit_bio_hook() and adjust the
bi_sector to point the beginning of the zone.
Second, record the returned physical address (and disk/partno) to the
ordered extent in end_bio_extent_writepage() after the bio has been
completed. We cannot resolve the physical address to the logical address
because we can neither take locks nor allocate a buffer in this end_bio
context. So, we need to record the physical address to resolve it later
in btrfs_finish_ordered_io().
And finally, rewrite the logical addresses of the extent mapping and
checksum data according to the physical address using btrfs_rmap_block.
If the returned address matches the originally allocated address, we can
skip this rewriting process.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A following patch will add another caller of
btrfs_lookup_ordered_extent(), but from a bio's endio context.
btrfs_lookup_ordered_extent() uses spin_lock_irq() which unconditionally
disables interrupts. Change this to spin_lock_irqsave() so interrupts
aren't disabled and re-enabled unconditionally.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On a zoned filesystem, cache if a block group is on a sequential write
only zone.
On sequential write only zones, we can use REQ_OP_ZONE_APPEND for
writing data, therefore provide btrfs_use_zone_append() to figure out if
IO is targeting a sequential write only zone and we can use
REQ_OP_ZONE_APPEND for data writing.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_rmap_block currently reverse-maps the physical addresses on all
devices to the corresponding logical addresses.
Extend the function to match to a specified device. The old functionality
of querying all devices is left intact by specifying NULL as target
device.
A block_device instead of a btrfs_device is passed into btrfs_rmap_block,
as this function is intended to reverse-map the result of a bio, which
only has a block_device.
Also export the function for later use.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To ensure that an ordered extent maps to a contiguous region on disk, we
need to maintain a "one bio == one ordered extent" rule.
Ensure that constructing bio does not span more than an ordered extent.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For a zone append write, the device decides the location the data is being
written to. Therefore we cannot ensure that two bios are written
consecutively on the device. In order to ensure that an ordered extent
maps to a contiguous region on disk, we need to maintain a "one bio ==
one ordered extent" rule.
Implement splitting of an ordered extent and extent map on bio submission
to adhere to the rule.
extract_ordered_extent() hooks into btrfs_submit_data_bio() and splits the
corresponding ordered extent so that the ordered extent's region fits into
one bio and the corresponding device limits.
Several sanity checks need to be done in extract_ordered_extent() e.g.
- We cannot split once end_bio'd ordered extent because we cannot divide
ordered->bytes_left for the split ones
- We do not expect a compressed ordered extent
- We should not have checksum list because we omit the list splitting.
Since the function is called before btrfs_wq_submit_bio() or
btrfs_csum_one_bio(), this should be always ensured.
We also need to split an extent map by creating a new one. If not,
unpin_extent_cache() complains about the difference between the start of
the extent map and the file's logical offset.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Zoned filesystems use REQ_OP_ZONE_APPEND bios for writing to actual
devices.
Let btrfs_end_bio() and btrfs_op be aware of it, by mapping
REQ_OP_ZONE_APPEND to BTRFS_MAP_WRITE and using btrfs_op() instead of
bio_op().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A zoned device has its own hardware restrictions e.g. max_zone_append_size
when using REQ_OP_ZONE_APPEND. To follow these restrictions, use
bio_add_zone_append_page() instead of bio_add_page(). We need target device
to use bio_add_zone_append_page(), so this commit reads the chunk
information to cache the target device to btrfs_io_bio(bio)->device.
Caching only the target device is sufficient here as zoned filesystems
only supports the single profile at the moment. Once more profiles will be
supported btrfs_io_bio can hold an extent_map to be able to check for the
restrictions of all devices the btrfs_bio will be mapped to.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Factor out adding a page to a bio from submit_extent_page(). The page
is added only when bio_flags are the same, contiguous and the added page
fits in the same stripe as pages in the bio.
Condition checks are reordered to allow early return to avoid possibly
heavy btrfs_bio_fits_in_stripe() calling.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We must reset the zones of a deleted unused block group to rewind the
zones' write pointers to the zones' start.
To do this, we can use the DISCARD_SYNC code to do the reset when the
filesystem is running on zoned devices.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the allocation info of a tree log node is not recorded in the extent
tree, calculate_alloc_pointer() cannot detect this node, so the pointer
can be over a tree node.
Replaying the log calls btrfs_remove_free_space() for each node in the
log tree.
So, advance the pointer after the node to not allocate over it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Tree manipulating operations like merging nodes often release
once-allocated tree nodes. Such nodes are cleaned so that pages in the
node are not uselessly written out. On zoned volumes, however, such
optimization blocks the following IOs as the cancellation of the write
out of the freed blocks breaks the sequential write sequence expected by
the device.
Introduce a list of clean and unwritten extent buffers that have been
released in a transaction. Redirty the buffers so that
btree_write_cache_pages() can send proper bios to the devices.
Besides it clears the entire content of the extent buffer not to confuse
raw block scanners e.g. 'btrfs check'. By clearing the content,
csum_dirty_buffer() complains about bytenr mismatch, so avoid the
checking and checksum using newly introduced buffer flag
EXTENT_BUFFER_NO_CHECK.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Implement a sequential extent allocator for zoned filesystems. This
allocator only needs to check if there is enough space in the block group
after the allocation pointer to satisfy the extent allocation request.
Therefore the allocator never manages bitmaps or clusters. Also, add
assertions to the corresponding functions.
As zone append writing is used, it would be unnecessary to track the
allocation offset, as the allocator only needs to check available space.
But by tracking and returning the offset as an allocated region, we can
skip modification of ordered extents and checksum information when there
is no IO reordering.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In a zoned filesystem a once written then freed region is not usable
until the underlying zone has been reset. So we need to distinguish such
unusable space from usable free space.
Therefore we need to introduce the "zone_unusable" field to the block
group structure, and "bytes_zone_unusable" to the space_info structure
to track the unusable space.
Pinned bytes are always reclaimed to the unusable space. But, when an
allocated region is returned before using e.g., the block group becomes
read-only between allocation time and reservation time, we can safely
return the region to the block group. For the situation, this commit
introduces "btrfs_add_free_space_unused". This behaves the same as
btrfs_add_free_space() on regular filesystem. On zoned filesystems, it
rewinds the allocation offset.
Because the read-only bytes tracks free but unusable bytes when the block
group is read-only, we need to migrate the zone_unusable bytes to
read-only bytes when a block group is marked read-only.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Conventional zones do not have a write pointer, so we cannot use it to
determine the allocation offset for sequential allocation if a block
group contains a conventional zone.
But instead, we can consider the end of the highest addressed extent in
the block group for the allocation offset.
For new block group, we cannot calculate the allocation offset by
consulting the extent tree, because it can cause deadlock by taking
extent buffer lock after chunk mutex, which is already taken in
btrfs_make_block_group(). Since it is a new block group anyways, we can
simply set the allocation offset to 0.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A zoned filesystem must allocate blocks at the zones' write pointer. The
device's write pointer position can be mapped to a logical address within
a block group. To facilitate this, add an "alloc_offset" to the
block-group to track the logical addresses of the write pointer.
This logical address is populated in btrfs_load_block_group_zone_info()
from the write pointers of corresponding zones.
For now, zoned filesystems the single profile. Supporting non-single
profile with zone append writing is not trivial. For example, in the DUP
profile, we send a zone append writing IO to two zones on a device. The
device reply with written LBAs for the IOs. If the offsets of the
returned addresses from the beginning of the zone are different, then it
results in different logical addresses.
We need fine-grained logical to physical mapping to support such separated
physical address issue. Since it should require additional metadata type,
disable non-single profiles for now.
This commit supports the case all the zones in a block group are
sequential. The next patch will handle the case having a conventional
zone.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a check in verify_one_dev_extent() to ensure that a device extent on
a zoned block device is aligned to the respective zone boundary.
If it isn't, mark the filesystem as unclean.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Implement a zoned chunk and device extent allocator. One device zone
becomes a device extent so that a zone reset affects only this device
extent and does not change the state of blocks in the neighbor device
extents.
To implement the allocator, we need to extend the following functions for
a zoned filesystem.
- init_alloc_chunk_ctl
- dev_extent_search_start
- dev_extent_hole_check
- decide_stripe_size
init_alloc_chunk_ctl_zoned() is mostly the same as regular one. It always
set the stripe_size to the zone size and aligns the parameters to the zone
size.
dev_extent_search_start() only aligns the start offset to zone boundaries.
We don't care about the first 1MB like in regular filesystem because we
anyway reserve the first two zones for superblock logging.
dev_extent_hole_check_zoned() checks if zones in given hole are either
conventional or empty sequential zones. Also, it skips zones reserved for
superblock logging.
With the change to the hole, the new hole may now contain pending extents.
So, in this case, loop again to check that.
Finally, decide_stripe_size_zoned() should shrink the number of devices
instead of stripe size because we need to honor stripe_size == zone_size.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Run a zoned filesystem on non-zoned devices. This is done by "slicing up"
the block device into static sized chunks and fake a conventional zone on
each of them. The emulated zone size is determined from the size of device
extent.
This is mainly aimed at testing of zoned filesystems, i.e. the zoned
chunk allocator, on regular block devices.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The implementation of fitrim depends on space cache, which is not used
and disabled for zoned extent allocator. So the current code does not
work with zoned filesystem.
In the future, we can implement fitrim for zoned filesystems by enabling
space cache (but, only for fitrim) or scanning the extent tree at fitrim
time. For now, disallow fitrim on zoned filesystems.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Don't set the zoned flag in fs_info as soon as we're encountering the
incompat filesystem flag for a zoned filesystem on mount. The zoned flag
in fs_info is in a union together with the zone_size, so setting it too
early will result in setting an incorrect zone_size as well.
Once the correct zone_size is read from the device, we can rely on the
zoned flag in fs_info as well to determine if the filesystem is zoned.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we have no write pointer in conventional zones, we cannot
determine the allocation offset from it. Instead, we set the allocation
offset after the highest addressed extent. This is done by reading the
extent tree in btrfs_load_block_group_zone_info().
However, this function is called from btrfs_read_block_groups(), so the
read lock for the tree node could be recursively taken.
To avoid this unsafe locking scenario, release the path before reading
the extent tree to get the allocation offset.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A zoned filesystem currently has a superblock at the beginning of the
superblock logging zones if the zones are conventional. This difference
in superblock position causes a chicken-and-egg problem for filesystems
with emulated zones. Since the device is a regular (non-zoned) device,
we cannot know if the filesystem is regular or zoned while reading the
superblock. But, to load the superblock, we need to see if it is
emulated zoned or not.
Place the superblocks at the same location as they are on regular
filesystem on regular devices to solve the problem. It is possible
because it's ensured that all the superblock locations are at an
(emulated) conventional zone on regular devices.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a preparation patch to implement zone emulation on a regular
device.
To emulate a zoned filesystem on a regular (non-zoned) device, we need to
decide an emulated zone size. Instead of making it a compile-time static
value, we'll make it configurable at mkfs time. Since we have one zone ==
one device extent restriction, we can determine the emulated zone size
from the size of a device extent. We can extend btrfs_get_dev_zone_info()
to show a regular device filled with conventional zones once the zone size
is decided.
The current call site of btrfs_get_dev_zone_info() during the mount process
is earlier than loading the file system trees so that we don't know the
size of a device extent at this point. Thus we can't slice a regular device
to conventional zones.
This patch introduces btrfs_get_dev_zone_info_all_devices to load the zone
info for all the devices. And, it places this function in open_ctree()
after loading the trees.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A ZONE_APPEND bio must follow hardware restrictions (e.g. not exceeding
max_zone_append_sectors) not to be split. bio_iov_iter_get_pages builds
such restricted bio using __bio_iov_append_get_pages if bio_op(bio) ==
REQ_OP_ZONE_APPEND.
To utilize it, we need to set the bio_op before calling
bio_iov_iter_get_pages(). This commit introduces IOMAP_F_ZONE_APPEND, so
that iomap user can set the flag to indicate they want REQ_OP_ZONE_APPEND
and restricted bio.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Change the retry policy in ext4_alloc_file_blocks() to allow for a full
retry cycle whenever a portion of an allocation request has been
fulfilled. A large allocation request often results in multiple calls
to ext4_map_blocks(), each of which is potentially subject to a
temporary ENOSPC condition and retry cycle. The current code only
allows for a single retry cycle.
This patch does not address a known bug or reported complaint.
However, it should make block allocation for fallocate and zero range
more robust.
In addition, simplify the conditional controlling the allocation while
loop, where testing len alone is sufficient. Remove the assignment to
ret2 in the error path after the call to ext4_map_blocks() since its
value isn't subsequently used.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20210113221403.18258-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
At btrfs_copy_root(), if the call to btrfs_inc_ref() fails we end up
returning without unlocking and releasing our reference on the extent
buffer named "cow" we previously allocated with btrfs_alloc_tree_block().
So fix that by unlocking the extent buffer and dropping our reference on
it before returning.
Fixes: be20aa9dba ("Btrfs: Add mount option to turn off data cow")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In read_extent_buffer_pages(), if we failed to lock the page atomically,
we just exit with return value 0.
This is counter-intuitive, as normally if we can't lock what we need, we
would return something like EAGAIN.
But that return hides under (wait == WAIT_NONE) branch, which only gets
triggered for readahead.
And for readahead, if we failed to lock the page, it means the extent
buffer is either being read by other thread, or has been read and is
under modification. Either way the eb will or has been cached, thus
readahead has no need to wait for it.
Add comment on this counter-intuitive behavior.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This adds the basic RO mount ability for 4K sector size on 64K page
system.
Currently we only plan to support 4K and 64K page system.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs data page read path, the page status update are handled in two
different locations:
btrfs_do_read_page()
{
while (cur <= end) {
/* No need to read from disk */
if (HOLE/PREALLOC/INLINE){
memset();
set_extent_uptodate();
continue;
}
/* Read from disk */
ret = submit_extent_page(end_bio_extent_readpage);
}
end_bio_extent_readpage()
{
endio_readpage_uptodate_page_status();
}
This is fine for sectorsize == PAGE_SIZE case, as for above loop we
should only hit one branch and then exit.
But for subpage, there is more work to be done in page status update:
- Page Unlock condition
Unlike regular page size == sectorsize case, we can no longer just
unlock a page.
Only the last reader of the page can unlock the page.
This means, we can unlock the page either in the while() loop, or in
the endio function.
- Page uptodate condition
Since we have multiple sectors to read for a page, we can only mark
the full page uptodate if all sectors are uptodate.
To handle both subpage and regular cases, introduce a pair of functions
to help handling page status update:
- begin_page_read()
For regular case, it does nothing.
For subpage case, it updates the reader counters so that later
end_page_read() can know who is the last one to unlock the page.
- end_page_read()
This is just endio_readpage_uptodate_page_status() renamed.
The original name is a little too long and too specific for endio.
The new thing added is the condition for page unlock.
Now for subpage data, we unlock the page if we're the last reader.
This does not only provide the basis for subpage data read, but also
hide the special handling of page read from the main read loop.
Also, since we're changing how the page lock is handled, there are two
existing error paths where we need to manually unlock the page before
calling begin_page_read().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To support subpage sector size, data also need extra info to make sure
which sectors in a page are uptodate/dirty/...
This patch will make pages for data inodes get btrfs_subpage structure
attached, and detached when the page is freed.
This patch also slightly changes the timing when
set_page_extent_mapped() is called to make sure:
- We have page->mapping set
page->mapping->host is used to grab btrfs_fs_info, thus we can only
call this function after page is mapped to an inode.
One call site attaches pages to inode manually, thus we have to modify
the timing of set_page_extent_mapped() a bit.
- As soon as possible, before other operations
Since memory allocation can fail, we have to do extra error handling.
Calling set_page_extent_mapped() as soon as possible can simply the
error handling for several call sites.
The idea is pretty much the same as iomap_page, but with more bitmaps
for btrfs specific cases.
Currently the plan is to switch iomap if iomap can provide sector
aligned write back (only write back dirty sectors, but not the full
page, data balance require this feature).
So we will stick to btrfs specific bitmap for now.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For subpage metadata validation check, there are some differences:
- Read must finish in one bvec
Since we're just reading one subpage range in one page, it should
never be split into two bios nor two bvecs.
- How to grab the existing eb
Instead of grabbing eb using page->private, we have to go search radix
tree as we don't have any direct pointer at hand.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To handle subpage status update, add the following:
- Use btrfs_page_*() subpage-aware helpers to update page status
Now we can handle both cases well.
- No page unlock for subpage metadata
Since subpage metadata doesn't utilize page locking at all, skip it.
For subpage data locking, it's handled in later commits.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a helper, read_extent_buffer_subpage(), to do the subpage
extent buffer read.
The difference between regular and subpage routines are:
- No page locking
Here we completely rely on extent locking.
Page locking can reduce the concurrency greatly, as if we lock one
page to read one extent buffer, all the other extent buffers in the
same page will have to wait.
- Extent uptodate condition
Despite the existing PageUptodate() and EXTENT_BUFFER_UPTODATE check,
We also need to check btrfs_subpage::uptodate_bitmap.
- No page iteration
Just one page, no need to loop, this greatly simplified the subpage
routine.
This patch only implements the bio submit part, no endio support yet.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unlike the original try_release_extent_buffer(),
try_release_subpage_extent_buffer() will iterate through all the ebs in
the page, and try to release each.
We can release the full page only after there's no private attached,
which means all ebs of that page have been released as well.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For btrfs_clone_extent_buffer(), it's mostly the same code of
__alloc_dummy_extent_buffer(), except it has extra page copy.
So to make it subpage compatible, we only need to:
- Call set_extent_buffer_uptodate() instead of SetPageUptodate()
This will set correct uptodate bit for subpage and regular sector size
cases.
Since we're calling set_extent_buffer_uptodate() which will also set
EXTENT_BUFFER_UPTODATE bit, we don't need to manually set that bit
either.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To support subpage in set_extent_buffer_uptodate and
clear_extent_buffer_uptodate we only need to use the subpage-aware
helpers to update the page bits.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce the following functions to handle subpage error status:
- btrfs_subpage_set_error()
- btrfs_subpage_clear_error()
- btrfs_subpage_test_error()
These helpers can only be called when the page has subpage attached
and the range is ensured to be inside the page.
- btrfs_page_set_error()
- btrfs_page_clear_error()
- btrfs_page_test_error()
These helpers can handle both regular sector size and subpage without
problem.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce the following functions to handle subpage uptodate status:
- btrfs_subpage_set_uptodate()
- btrfs_subpage_clear_uptodate()
- btrfs_subpage_test_uptodate()
These helpers can only be called when the page has subpage attached
and the range is ensured to be inside the page.
- btrfs_page_set_uptodate()
- btrfs_page_clear_uptodate()
- btrfs_page_test_uptodate()
These helpers can handle both regular sector size and subpage.
Although caller should still ensure that the range is inside the page.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are locations where we allocate dummy extent buffers for temporary
usage, like in tree_mod_log_rewind() or get_old_root().
These dummy extent buffers will be handled by the same eb accessors, and
if they don't have page::private subpage eb accessors could fail.
To address such problems, make __alloc_dummy_extent_buffer() attach
page private for dummy extent buffers too.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_release_extent_buffer_pages(), we need to add extra handling
for subpage.
Introduce a helper, detach_extent_buffer_page(), to do different
handling for regular and subpage cases.
For subpage case, handle detaching page private.
For unmapped (dummy or cloned) ebs, we can detach the page private
immediately as the page can only be attached to one unmapped eb.
For mapped ebs, we have to ensure there are no eb in the page range
before we delete it, as page->private is shared between all ebs in the
same page.
But there is a subpage specific race, where we can race with extent
buffer allocation, and clear the page private while new eb is still
being utilized, like this:
Extent buffer A is the new extent buffer which will be allocated,
while extent buffer B is the last existing extent buffer of the page.
T1 (eb A) | T2 (eb B)
-------------------------------+------------------------------
alloc_extent_buffer() | btrfs_release_extent_buffer_pages()
|- p = find_or_create_page() | |
|- attach_extent_buffer_page() | |
| | |- detach_extent_buffer_page()
| | |- if (!page_range_has_eb())
| | | No new eb in the page range yet
| | | As new eb A hasn't yet been
| | | inserted into radix tree.
| | |- btrfs_detach_subpage()
| | |- detach_page_private();
|- radix_tree_insert() |
Then we have a metadata eb whose page has no private bit.
To avoid such race, we introduce a subpage metadata-specific member,
btrfs_subpage::eb_refs.
In alloc_extent_buffer() we increase eb_refs in the critical section of
private_lock. Then page_range_has_eb() will return true for
detach_extent_buffer_page(), and will not detach page private.
The section is marked by:
- btrfs_page_inc_eb_refs()
- btrfs_page_dec_eb_refs()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For subpage case, grab_extent_buffer() can't really get an extent buffer
just from btrfs_subpage.
We have radix tree lock protecting us from inserting the same eb into
the tree. Thus we don't really need to do the extra hassle, just let
alloc_extent_buffer() handle the existing eb in radix tree.
Now if two ebs are being allocated as the same time, one will fail with
-EEIXST when inserting into the radix tree.
So for grab_extent_buffer(), just always return NULL for subpage case.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For subpage case, we need to allocate additional memory for each
metadata page.
So we need to:
- Allow attach_extent_buffer_page() to return int to indicate allocation
failure
- Allow manually pre-allocate subpage memory for alloc_extent_buffer()
As we don't want to use GFP_ATOMIC under spinlock, we introduce
btrfs_alloc_subpage() and btrfs_free_subpage() functions for this
purpose.
(The simple wrap for btrfs_free_subpage() is for later convert to
kmem_cache. Already internally tested without problem)
- Preallocate btrfs_subpage structure for alloc_extent_buffer()
We don't want to call memory allocation with spinlock held, so
do preallocation before we acquire mapping->private_lock.
- Handle subpage and regular case differently in
attach_extent_buffer_page()
For regular case, no change, just do the usual thing.
For subpage case, allocate new memory or use the preallocated memory.
For future subpage metadata, we will make use of radix tree to grab
extent buffer.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For sectorsize < page size support, we need a structure to record extra
status info for each sector of a page.
Introduce the skeleton structure, all subpage related code would go to
subpage.[ch].
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For the incoming subpage support, UNMAPPED extent buffer will have
different behavior in btrfs_release_extent_buffer().
This means we need to set UNMAPPED bit early before calling
btrfs_release_extent_buffer().
Currently there is only one caller which relies on
btrfs_release_extent_buffer() in its error path while set UNMAPPED bit
late:
- btrfs_clone_extent_buffer()
Make it subpage compatible by setting the UNMAPPED bit early, since
we're here, also move the UPTODATE bit early.
There is another caller, __alloc_dummy_extent_buffer(), setting
UNMAPPED bit late, but that function clean up the allocated page
manually, thus no need for any modification.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
PAGE_CLEAR_DIRTY and PAGE_SET_WRITEBACK are two defines used in
__process_pages_contig(), to let the function know to clear page dirty
bit and then set page writeback.
However page writeback and dirty bits are conflicting (at least for
sector size == PAGE_SIZE case), this means these two have to be always
updated together.
This means we can merge PAGE_CLEAR_DIRTY and PAGE_SET_WRITEBACK to
PAGE_START_WRITEBACK.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Often an fsync needs to fallback to a transaction commit for several
reasons (to ensure consistency after a power failure, a new block group
was allocated or a temporary error such as ENOMEM or ENOSPC happened).
In that case the log is marked as needing a full commit and any concurrent
tasks attempting to log inodes or commit the log will also fallback to the
transaction commit. When this happens they all wait for the task that first
started the transaction commit to finish the transaction commit - however
they wait until the full transaction commit happens, which is not needed,
as they only need to wait for the superblocks to be persisted and not for
unpinning all the extents pinned during the transaction's lifetime, which
even for short lived transactions can be a few thousand and take some
significant amount of time to complete - for dbench workloads I have
observed up to 4~5 milliseconds of time spent unpinning extents in the
worst cases, and the number of pinned extents was between 2 to 3 thousand.
So allow fsync tasks to skip waiting for the unpinning of extents when
they call btrfs_commit_transaction() and they were not the task that
started the transaction commit (that one has to do it, the alternative
would be to offload the transaction commit to another task so that it
could avoid waiting for the extent unpinning or offload the extent
unpinning to another task).
This patch is part of a patchset comprised of the following patches:
btrfs: remove unnecessary directory inode item update when deleting dir entry
btrfs: stop setting nbytes when filling inode item for logging
btrfs: avoid logging new ancestor inodes when logging new inode
btrfs: skip logging directories already logged when logging all parents
btrfs: skip logging inodes already logged when logging new entries
btrfs: remove unnecessary check_parent_dirs_for_sync()
btrfs: make concurrent fsyncs wait less when waiting for a transaction commit
After applying the entire patchset, dbench shows improvements in respect
to throughput and latency. The script used to measure it is the following:
$ cat dbench-test.sh
#!/bin/bash
DEV=/dev/sdk
MNT=/mnt/sdk
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-m single -d single"
echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
umount $DEV &> /dev/null
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
dbench -D $MNT -t 300 64
umount $MNT
The test was run on a physical machine with 12 cores (Intel corei7), 64G
of ram, using a NVMe device and a non-debug kernel configuration (Debian's
default configuration).
Before applying patchset, 32 clients:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 9627107 0.153 61.938
Close 7072076 0.001 3.175
Rename 407633 1.222 44.439
Unlink 1943895 0.658 44.440
Deltree 256 17.339 110.891
Mkdir 128 0.003 0.009
Qpathinfo 8725406 0.064 17.850
Qfileinfo 1529516 0.001 2.188
Qfsinfo 1599884 0.002 1.457
Sfileinfo 784200 0.005 3.562
Find 3373513 0.411 30.312
WriteX 4802132 0.053 29.054
ReadX 15089959 0.002 5.801
LockX 31344 0.002 0.425
UnlockX 31344 0.001 0.173
Flush 674724 5.952 341.830
Throughput 1008.02 MB/sec 32 clients 32 procs max_latency=341.833 ms
After applying patchset, 32 clients:
After patchset, with 32 clients:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 9931568 0.111 25.597
Close 7295730 0.001 2.171
Rename 420549 0.982 49.714
Unlink 2005366 0.497 39.015
Deltree 256 11.149 89.242
Mkdir 128 0.002 0.014
Qpathinfo 9001863 0.049 20.761
Qfileinfo 1577730 0.001 2.546
Qfsinfo 1650508 0.002 3.531
Sfileinfo 809031 0.005 5.846
Find 3480259 0.309 23.977
WriteX 4952505 0.043 41.283
ReadX 15568127 0.002 5.476
LockX 32338 0.002 0.978
UnlockX 32338 0.001 2.032
Flush 696017 7.485 228.835
Throughput 1049.91 MB/sec 32 clients 32 procs max_latency=228.847 ms
--> +4.1% throughput, -39.6% max latency
Before applying patchset, 64 clients:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 8956748 0.342 108.312
Close 6579660 0.001 3.823
Rename 379209 2.396 81.897
Unlink 1808625 1.108 131.148
Deltree 256 25.632 172.176
Mkdir 128 0.003 0.018
Qpathinfo 8117615 0.131 55.916
Qfileinfo 1423495 0.001 2.635
Qfsinfo 1488496 0.002 5.412
Sfileinfo 729472 0.007 8.643
Find 3138598 0.855 78.321
WriteX 4470783 0.102 79.442
ReadX 14038139 0.002 7.578
LockX 29158 0.002 0.844
UnlockX 29158 0.001 0.567
Flush 627746 14.168 506.151
Throughput 924.738 MB/sec 64 clients 64 procs max_latency=506.154 ms
After applying patchset, 64 clients:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 9069003 0.303 43.193
Close 6662328 0.001 3.888
Rename 383976 2.194 46.418
Unlink 1831080 1.022 43.873
Deltree 256 24.037 155.763
Mkdir 128 0.002 0.005
Qpathinfo 8219173 0.137 30.233
Qfileinfo 1441203 0.001 3.204
Qfsinfo 1507092 0.002 4.055
Sfileinfo 738775 0.006 5.431
Find 3177874 0.936 38.170
WriteX 4526152 0.084 39.518
ReadX 14213562 0.002 24.760
LockX 29522 0.002 1.221
UnlockX 29522 0.001 0.694
Flush 635652 14.358 422.039
Throughput 990.13 MB/sec 64 clients 64 procs max_latency=422.043 ms
--> +6.8% throughput, -18.1% max latency
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Whenever we fsync an inode, if it is a directory, a regular file that was
created in the current transaction or has last_unlink_trans set to the
generation of the current transaction, we check if any of its ancestor
inodes (and the inode itself if it is a directory) can not be logged and
need a fallback to a full transaction commit - if so, we return with a
value of 1 in order to fallback to a transaction commit.
However we often do not need to fallback to a transaction commit because:
1) The ancestor inode is not an immediate parent, and therefore there is
not an explicit request to log it and it is not needed neither to
guarantee the consistency of the inode originally asked to be logged
(fsynced) nor its immediate parent;
2) The ancestor inode was already logged before, in which case any link,
unlink or rename operation updates the log as needed.
So for these two cases we can avoid an unnecessary transaction commit.
Therefore remove check_parent_dirs_for_sync() and add a check at the top
of btrfs_log_inode() to make us fallback immediately to a transaction
commit when we are logging a directory inode that can not be logged and
needs a full transaction commit. All we need to protect is the case where
after renaming a file someone fsyncs only the old directory, which would
result is losing the renamed file after a log replay.
This patch is part of a patchset comprised of the following patches:
btrfs: remove unnecessary directory inode item update when deleting dir entry
btrfs: stop setting nbytes when filling inode item for logging
btrfs: avoid logging new ancestor inodes when logging new inode
btrfs: skip logging directories already logged when logging all parents
btrfs: skip logging inodes already logged when logging new entries
btrfs: remove unnecessary check_parent_dirs_for_sync()
btrfs: make concurrent fsyncs wait less when waiting for a transaction commit
Performance results, after applying all patches, are mentioned in the
change log of the last patch.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging new directory entries of a directory, we log the inodes of
new dentries and the inodes of dentries pointing to directories that
may have been created in past transactions. For the case of directories
we log in full mode, which can be particularly expensive for large
directories.
We do use btrfs_inode_in_log() to skip already logged inodes, however for
that helper to return true, it requires that the log transaction used to
log the inode to be already committed. This means that when we have more
than one task using the same log transaction we can end up logging an
inode multiple times, which is a waste of time and not necessary since
the log will be committed by one of the tasks and the others will wait for
the log transaction to be committed before returning to user space.
So simply replace the use of btrfs_inode_in_log() with the new helper
function need_log_inode(), introduced in a previous commit.
This patch is part of a patchset comprised of the following patches:
btrfs: remove unnecessary directory inode item update when deleting dir entry
btrfs: stop setting nbytes when filling inode item for logging
btrfs: avoid logging new ancestor inodes when logging new inode
btrfs: skip logging directories already logged when logging all parents
btrfs: skip logging inodes already logged when logging new entries
btrfs: remove unnecessary check_parent_dirs_for_sync()
btrfs: make concurrent fsyncs wait less when waiting for a transaction commit
Performance results, after applying all patches, are mentioned in the
change log of the last patch.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Some times when we fsync an inode we need to do a full log of all its
ancestors (due to unlink, link or rename operations), which can be an
expensive operation, specially if the directories are large.
However if we find an ancestor directory inode that is already logged in
the current transaction, and has no inserted/updated/deleted xattrs since
it was last logged, we can skip logging the directory again. We are safe
to skip that since we know that for logged directories, any link, unlink
or rename operations that implicate the directory will update the log as
necessary.
So use the helper need_log_dir(), introduced in a previous commit, to
detect already logged directories that can be skipped.
This patch is part of a patchset comprised of the following patches:
btrfs: remove unnecessary directory inode item update when deleting dir entry
btrfs: stop setting nbytes when filling inode item for logging
btrfs: avoid logging new ancestor inodes when logging new inode
btrfs: skip logging directories already logged when logging all parents
btrfs: skip logging inodes already logged when logging new entries
btrfs: remove unnecessary check_parent_dirs_for_sync()
btrfs: make concurrent fsyncs wait less when waiting for a transaction commit
Performance results, after applying all patches, are mentioned in the
change log of the last patch.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we fsync a new file, created in the current transaction, we check
all its ancestor inodes and always log them if they were created in the
current transaction - even if we have already logged them before, which
is a waste of time.
So avoid logging new ancestor inodes if they were already logged before
and have no xattrs added/updated/removed since they were last logged.
This patch is part of a patchset comprised of the following patches:
btrfs: remove unnecessary directory inode item update when deleting dir entry
btrfs: stop setting nbytes when filling inode item for logging
btrfs: avoid logging new ancestor inodes when logging new inode
btrfs: skip logging directories already logged when logging all parents
btrfs: skip logging inodes already logged when logging new entries
btrfs: remove unnecessary check_parent_dirs_for_sync()
btrfs: make concurrent fsyncs wait less when waiting for a transaction commit
Performance results, after applying all patches, are mentioned in the
change log of the last patch.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we fill an inode item for logging we are setting its nbytes field
with the value returned by inode_get_bytes() (a VFS API), however we do
not need it because it is not used during log replay. In fact, for fast
fsyncs, when we call inode_get_bytes() we may even get an outdated value
for nbytes because the nbytes field of the inode is only updated when
ordered extents complete, and a fast fsync only waits for writeback to
complete, it does not wait for ordered extent completion.
So just remove the setup of nbytes and add an explicit comment mentioning
why we do not set it. This also avoids adding contention on the inode's
i_lock (VFS) with concurrent stat() calls, since that spinlock is used by
inode_get_bytes() which is also called by our stat callback
(btrfs_getattr()).
This patch is part of a patchset comprised of the following patches:
btrfs: remove unnecessary directory inode item update when deleting dir entry
btrfs: stop setting nbytes when filling inode item for logging
btrfs: avoid logging new ancestor inodes when logging new inode
btrfs: skip logging directories already logged when logging all parents
btrfs: skip logging inodes already logged when logging new entries
btrfs: remove unnecessary check_parent_dirs_for_sync()
btrfs: make concurrent fsyncs wait less when waiting for a transaction commit
Performance results, after applying all patches, are mentioned in the
change log of the last patch.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we remove a directory entry, as part of an unlink operation, if the
directory was logged before we must remove the directory index items from
the log. We are also updating the inode item of the directory to update
its i_size, but that is not necessary because during log replay we do not
need it and we correctly adjust the i_size in the inode item of the
subvolume as we process directory index items and replay deletes.
This is not needed since commit d555438b6e ("Btrfs: drop dir i_size
when adding new names on replay"), where we explicitly ignore the i_size
of directory inode items on log replay. Before that we used it but it
was buggy as mentioned in that commit's change log (i_size got a larger
value then it should have).
So stop updating the i_size of the directory inode item in the log, as
that is a waste of time, adds more log contention to the log tree and
often results in COWing more extent buffers for the log tree.
This code path is triggered often during dbench workloads for example.
This patch is part of a patchset comprised of the following patches:
btrfs: remove unnecessary directory inode item update when deleting dir entry
btrfs: stop setting nbytes when filling inode item for logging
btrfs: avoid logging new ancestor inodes when logging new inode
btrfs: skip logging directories already logged when logging all parents
btrfs: skip logging inodes already logged when logging new entries
btrfs: remove unnecessary check_parent_dirs_for_sync()
btrfs: make concurrent fsyncs wait less when waiting for a transaction commit
Performance results, after applying all patches, are mentioned in the
change log of the last patch.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Before this change, the btrfs_get_io_geometry() function was calling
btrfs_get_chunk_map() to get the extent mapping, necessary for
calculating the I/O geometry. It was using that extent mapping only
internally and freeing the pointer after its execution.
That resulted in calling btrfs_get_chunk_map() de facto twice by the
__btrfs_map_block() function. It was calling btrfs_get_io_geometry()
first and then calling btrfs_get_chunk_map() directly to get the extent
mapping, used by the rest of the function.
Change that to passing the extent mapping to the btrfs_get_io_geometry()
function as an argument.
This could improve performance in some cases. For very large
filesystems, i.e. several thousands of allocated chunks, not only this
avoids searching two times the rbtree, saving time, it may also help
reducing contention on the lock that protects the tree - thinking of
writeback starting for multiple inodes, other tasks allocating or
removing chunks, and anything else that requires access to the rbtree.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Michal Rostecki <mrostecki@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add Filipe's analysis ]
Signed-off-by: David Sterba <dsterba@suse.com>
Commit dbfdb6d1b3 ("Btrfs: Search for all ordered extents that could
span across a page") make btrfs_invalidapage() to search all ordered
extents.
The offending code looks like this:
again:
start = page_start;
ordered = btrfs_lookup_ordered_range(inode, start, page_end - start + 1);
if (ordred) {
end = min(page_end,
ordered->file_offset + ordered->num_bytes - 1);
/* Do the cleanup */
start = end + 1;
if (start < page_end)
goto again;
}
The behavior is indeed necessary for the incoming subpage support, but
when it iterates through all the ordered extents, it also resets the
search range @start.
This means, for the following cases, we can double account the ordered
extents, causing its bytes_left underflow:
Page offset
0 16K 32K
|<--- OE 1 --->|<--- OE 2 ---->|
As the first iteration will find ordered extent (OE) 1, which doesn't
cover the full page, thus after cleanup code, we need to retry again.
But again label will reset start to page_start, and we got OE 1 again,
which causes double accounting on OE 1, and cause OE 1's byte_left to
underflow.
This problem can only happen for subpage case, as for regular sectorsize
== PAGE_SIZE case, we will always find a OE ends at or after page end,
thus no way to trigger the problem.
Move the again label after start = page_start. There will be more
comprehensive rework to convert the open coded loop to a proper while
loop for subpage support.
Fixes: dbfdb6d1b3 ("Btrfs: Search for all ordered extents that could span across a page")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix the following coccicheck warnings:
./fs/btrfs/delayed-inode.c:1157:39-41: WARNING !A || A && B is
equivalent to !A || B.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Suggested-by: Jiapeng Zhong <oswb@linux.alibaba.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Abaci Team <abaci-bugfix@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The comment for can_nocow_extent() says that the function will flush
ordered extents, however that never happens and was never true before the
comment was added in commit e4ecaf90bc ("btrfs: add comments for
btrfs_check_can_nocow() and can_nocow_extent()"). This is true only for
the function btrfs_check_can_nocow(), which after that commit was renamed
to check_can_nocow(). So just remove that part of the comment.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Often when I'm debugging ENOSPC related issues I have to resort to
printing the entire ENOSPC state with trace_printk() in different spots.
This gets pretty annoying, so add a trace state that does this for us.
Then add a trace point at the end of preemptive flushing so you can see
the state of the space_info when we decide to exit preemptive flushing.
This helped me figure out we weren't kicking in the preemptive flushing
soon enough.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we have normal ticketed flushing and preemptive flushing, adjust
the tracepoint so that we know the source of the flushing action to make
it easier to debug problems.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Starting preemptive flushing at 50% of available free space is a good
start, but some workloads are particularly abusive and can quickly
overwhelm the preemptive flushing code and drive us into using tickets.
Handle this by clamping down on our threshold for starting and
continuing to run preemptive flushing. This is particularly important
for our overcommit case, as we can really drive the file system into
overages and then it's more difficult to pull it back as we start to
actually fill up the file system.
The clamping is essentially 2^CLAMP, but we start at 1 so whatever we
calculate for overcommit is the baseline.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A lot of this was added all in one go with no explanation, and is a bit
unwieldy and confusing. Simplify the logic to start preemptive flushing
if we've reserved more than half of our available free space.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_calc_reclaim_metadata_size does two things, it returns
the space currently required for flushing by the tickets, and if there
are no tickets it calculates a value for the preemptive flushing.
However for the normal ticketed flushing we really only care about the
space required for tickets. We will accidentally come in and flush one
time, but as soon as we see there are no tickets we bail out of our
flushing.
Fix this by making btrfs_calc_reclaim_metadata_size really only tell us
what is required for flushing if we have people waiting on space. Then
move the preemptive flushing logic into need_preemptive_reclaim(). We
ignore btrfs_calc_reclaim_metadata_size() in need_preemptive_reclaim()
because if we are in this path then we made our reservation and there
are not pending tickets currently, so we do not need to check it, simply
do the fuzzy logic to check if we're getting low on space.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we're flushing space for tickets then we have
space_info->reclaim_size set and we do not need to do background
reclaim.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All of our normal flushing is asynchronous reclaim, so this helper is
poorly named. This is more checking if we need to preemptively flush
space, so rename it to need_preemptive_reclaim.
Also switch it to bool and make it plain static as followup patches will
move more code here.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently if we ever have to flush space because we do not have enough
we allocate a ticket and attach it to the space_info, and then
systematically flush things in the filesystem that hold space
reservations until our space is reclaimed.
However this has a latency cost, we must go to sleep and wait for the
flushing to make progress before we are woken up and allowed to continue
doing our work.
In order to address that we used to kick off the async worker to flush
space preemptively, so that we could be reclaiming space hopefully
before any tasks needed to stop and wait for space to reclaim.
When I introduced the ticketed ENOSPC stuff this broke slightly in the
fact that we were using tickets to indicate if we were done flushing.
No tickets, no more flushing. However this meant that we essentially
never preemptively flushed. This caused a write performance regression
that Nikolay noticed in an unrelated patch that removed the committing
of the transaction during btrfs_end_transaction.
The behavior that happened pre that patch was btrfs_end_transaction()
would see that we were low on space, and it would commit the
transaction. This was bad because in this particular case you could end
up with thousands and thousands of transactions being committed during
the 5 minute reproducer. With the patch to remove this behavior we got
much more sane transaction commits, but we ended up slower because we
would write for a while, flush, write for a while, flush again.
To address this we need to reinstate a preemptive flushing mechanism.
However it is distinctly different from our ticketing flushing in that
it doesn't have tickets to base it's decisions on. Instead of bolting
this logic into our existing flushing work, add another worker to handle
this preemptive flushing. Here we will attempt to be slightly
intelligent about the things that we flushing, attempting to balance
between whichever pool is taking up the most space.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Solely for preemptive flushing, we want to be able to force the
transaction commit without any of the ambiguity of
may_commit_transaction(). This is because may_commit_transaction()
checks tickets and such, and in preemptive flushing we already know
it'll be helpful, so use this to keep the code nice and clean and
straightforward.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
We track dio_bytes because the shrink delalloc code needs to know if we
have more DIO in flight than we have normal buffered IO. The reason for
this is because we can't "flush" DIO, we have to just wait on the
ordered extents to finish.
However this is true of all ordered extents. If we have more ordered
space outstanding than dirty pages we should be waiting on ordered
extents. We already are ok on this front technically, because we always
do a FLUSH_DELALLOC_WAIT loop, but I want to use the ordered counter in
the preemptive flushing code as well, so change this to count all
ordered bytes instead of just DIO ordered bytes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While debugging a ENOSPC related performance problem I needed to see the
time difference between start and end of a reserve ticket, so add a
trace point to report when we handle a reserve ticket.
I opted to spit out start_ns itself without calculating the difference
because there could be a gap between enabling the tracepoint and setting
start_ns. Doing it this way allows us to filter on 0 start_ns so we
don't get bogus entries, and we can easily calculate the time difference
with bpftrace or something else.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I got a automated message from somebody who runs clang against our
kernels and it's because I used the wrong enum type for what I passed
into flush_space, caught by -Wenum-conversion. Change the argument to
be explicitly the enum we're expecting to make everything consistent.
Maybe eventually gcc will catch errors like this.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_compare_trees and changed_cb use a void *ctx parameter instead of
struct send_ctx *sctx but when used in changed_cb it is immediately
cast to `struct send_ctx *sctx = ctx;`.
changed_cb is only ever called from btrfs_compare_trees and full_send_tree:
- full_send_tree already passes a struct send_ctx *sctx
- btrfs_compare_trees is only called by send_subvol with a struct send_ctx *sctx
- void *ctx in btrfs_compare_trees is only used to be passed to changed_cb
So casting to/from void *ctx seems unnecessary and directly using
struct send_ctx *sctx instead provides better type-safety.
The original reason for using void *ctx in the first place seems to have
been dropped with 1b51d6fce4 ("btrfs: send: remove indirect callback
parameter for changed_cb").
Signed-off-by: Roman Anasal <roman.anasal@bdsu.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We love running delayed refs in commit_cowonly_roots, but it is a bit
excessive. I was seeing cases of running 3 or 4 refs a few times in a
row during this time. Instead simply:
- update all of the roots first
- then run delayed refs
- then handle the empty block groups case
- and then if we have any more dirty roots do the whole thing again
This allows us to be much more efficient with our delayed ref running,
as we can batch a few more operations at once.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This was added in commit 361048f586 ("Btrfs: fix full backref problem
when inserting shared block reference") to address a problem where we
hit the following BUG_ON() in alloc_reserved_tree_block
if (node->type == BTRFS_SHARED_BLOCK_REF_KEY) {
BUG_ON(!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF));
However this BUG_ON() is bogus, and was removed by previous commit:
btrfs: remove bogus BUG_ON in alloc_reserved_tree_block
We no longer need to run delayed refs because of this, and can remove
this flushing here.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The fix 361048f586 ("Btrfs: fix full backref problem when inserting
shared block reference") added a delayed ref flushing at subvolume
creation time in order to avoid hitting this particular BUG_ON().
Before this fix, we were tripping the BUG_ON() by
1. Modify snapshot A, which creates blocks with a normal reference for
snapshot A, as A is the owner of these blocks. We now have delayed
refs for these blocks.
2. Create a snapshot of A named B, which pushes references for the
children blocks of the root node for the new root B, thus creating
more delayed refs for newly allocated blocks.
3. A is modified, and because the metadata blocks can now be shared, it
must push FULL_BACKREF references to the children of any block that A
COWs down it's path to its target key.
4. Delayed refs are run. Because these are newly allocated blocks, we
have ->must_insert_reserved reserved set on the delayed ref head, we
call into alloc_reserved_tree_block() to add the extent item, and
then add our ref. At the time of this fix, we were ordering
FULL_BACKREF delayed ref operations first, so we'd go to add this
reference and then BUG_ON() because we didn't have the FULL_BACKREF
flag set.
The patch fixed this problem by making sure we ran the delayed refs
before we had the chance to modify A. This meant that any *new* blocks
would have had their extent items created _before_ we would ever
actually COW down and generate FULL_BACKREF entries. Thus the problem
went away.
However this BUG_ON() is actually completely bogus. The existence of a
full backref doesn't necessarily mean that FULL_BACKREF must be set on
that block, it must only be set on the actual parent itself. Consider
the example provided above. If we COW down one path from A, any nodes
are going to have a FULL_BACKREF ref pushed down to _all_ of their
children, but not all of the children are going to have FULL_BACKREF
set. It is completely valid to have an extent item with normal and full
backrefs without FULL_BACKREF actually set on the block itself.
As a final note, I have been testing with the patch (applied after this
one)
btrfs: stop running all delayed refs during snapshot
which removed this flushing. My test was a torture test which did a lot
of operations while snapshotting and deleting snapshots as well as
relocation, and I never tripped this BUG_ON(). This is actually because
at the time of 361048f586, we ordered SHARED keys _before_ normal
references, and thus they would get run first. However currently they
are ordered _after_ normal references, so we'd do the initial creation
without having a shared reference, and thus not hit this BUG_ON(), which
explains why I didn't start hitting this problem during my testing with
my other patch applied.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The commit d672633545 ("btrfs: qgroup: Make snapshot accounting work
with new extent-oriented qgroup.") added a flush of the delayed refs
during snapshot creation in order to get the qgroup accounting properly.
However this code has changed and been moved to it's own helper that is
skipped if qgroups are turned off. Move the flushing to the helper, as
we do not need it when qgroups are turned off.
Also add a comment explaining why it exists, and why it doesn't actually
save us. This will be helpful later when we try to fix qgroup
accounting properly.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We try to pre-flush the delayed refs when committing, because we want to
do as little work as possible in the critical section of the transaction
commit.
However doing this twice can lead to very long transaction commit delays
as other threads are allowed to continue to generate more delayed refs,
which potentially delays the commit by multiple minutes in very extreme
cases.
So simply stick to one pre-flush, and then continue the rest of the
transaction commit.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously our delayed ref running used the total number of items as the
items to run. However we changed that to number of heads to run with
the delayed_refs_rsv, as generally we want to run all of the operations
for one bytenr.
But with btrfs_run_delayed_refs(trans, 0) we set our count to 2x the
number of items that we have. This is generally fine, but if we have
some operation generation loads of delayed refs while we're doing this
pre-flushing in the transaction commit, we'll just spin forever doing
delayed refs.
Fix this to simply pick the number of delayed refs we currently have,
that way we do not end up doing a lot of extra work that's being
generated in other threads.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I've been running a stress test that runs 20 workers in their own
subvolume, which are running an fsstress instance with 4 threads per
worker, which is 80 total fsstress threads. In addition to this I'm
running balance in the background as well as creating and deleting
snapshots. This test takes around 12 hours to run normally, going
slower and slower as the test goes on.
The reason for this is because fsstress is running fsync sometimes, and
because we're messing with block groups we often fall through to
btrfs_commit_transaction, so will often have 20-30 threads all calling
btrfs_commit_transaction at the same time.
These all get stuck contending on the extent tree while they try to run
delayed refs during the initial part of the commit.
This is suboptimal, really because the extent tree is a single point of
failure we only want one thread acting on that tree at once to reduce
lock contention.
Fix this by making the flushing mechanism a bit operation, to make it
easy to use test_and_set_bit() in order to make sure only one task does
this initial flush.
Once we're into the transaction commit we only have one thread doing
delayed ref running, it's just this initial pre-flush that is
problematic. With this patch my stress test takes around 90 minutes to
run, instead of 12 hours.
The memory barrier is not necessary for the flushing bit as it's
ordered, unlike plain int. The transaction state accessed in
btrfs_should_end_transaction could be affected by that too as it's not
always used under transaction lock. Upon Nikolay's analysis in [1]
it's not necessary:
In should_end_transaction it's read without holding any locks. (U)
It's modified in btrfs_cleanup_transaction without holding the
fs_info->trans_lock (U), but the STATE_ERROR flag is going to be set.
set in cleanup_transaction under fs_info->trans_lock (L)
set in btrfs_commit_trans to COMMIT_START under fs_info->trans_lock.(L)
set in btrfs_commit_trans to COMMIT_DOING under fs_info->trans_lock.(L)
set in btrfs_commit_trans to COMMIT_UNBLOCK under
fs_info->trans_lock.(L)
set in btrfs_commit_trans to COMMIT_COMPLETED without locks but at this
point the transaction is finished and fs_info->running_trans is NULL (U
but irrelevant).
So by the looks of it we can have a concurrent READ race with a WRITE,
due to reads not taking a lock. In this case what we want to ensure is
we either see new or old state. I consulted with Will Deacon and he said
that in such a case we'd want to annotate the accesses to ->state with
(READ|WRITE)_ONCE so as to avoid a theoretical tear, in this case I
don't think this could happen but I imagine at some point KCSAN would
flag such an access as racy (which it is).
[1] https://lore.kernel.org/linux-btrfs/e1fd5cc1-0f28-f670-69f4-e9958b4964e6@suse.com
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add comments regarding memory barrier ]
Signed-off-by: David Sterba <dsterba@suse.com>
While running some stress tests I started getting hung task messages.
This is because the delete unused block groups code has to take the
delete_unused_bgs_mutex to do it's work, which is taken by balance to
make sure we don't delete block groups while we're balancing.
The problem is that balance can take a while, and so we were getting
hung task warnings. We don't need to block and run these things, and
the cleaner is needed to do other work, so trylock on this mutex and
just bail if we can't acquire it right away.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While testing my error handling patches, I added a error injection site
at btrfs_inc_extent_ref, to validate the error handling I added was
doing the correct thing. However I hit a pretty ugly corruption while
doing this check, with the following error injection stack trace:
btrfs_inc_extent_ref
btrfs_copy_root
create_reloc_root
btrfs_init_reloc_root
btrfs_record_root_in_trans
btrfs_start_transaction
btrfs_update_inode
btrfs_update_time
touch_atime
file_accessed
btrfs_file_mmap
This is because we do not catch the error from btrfs_inc_extent_ref,
which in practice would be ENOMEM, which means we lose the extent
references for a root that has already been allocated and inserted,
which is the problem. Fix this by aborting the transaction if we fail
to do the reference modification.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A weird KASAN problem that Zygo reported could have been easily caught
if we checked for basic things in our backref freeing code. We have two
methods of freeing a backref node
- btrfs_backref_free_node: this just is kfree() essentially.
- btrfs_backref_drop_node: this actually unlinks the node and cleans up
everything and then calls btrfs_backref_free_node().
We should mostly be using btrfs_backref_drop_node(), to make sure the
node is properly unlinked from the backref cache, and only use
btrfs_backref_free_node() when we know the node isn't actually linked to
the backref cache. We made a mistake here and thus got the KASAN splat.
Make this style of issue easier to find by adding some ASSERT()'s to
btrfs_backref_free_node() and adjusting our deletion stuff to properly
init the list so we can rely on list_empty() checks working properly.
BUG: KASAN: use-after-free in btrfs_backref_cleanup_node+0x18a/0x420
Read of size 8 at addr ffff888112402950 by task btrfs/28836
CPU: 0 PID: 28836 Comm: btrfs Tainted: G W 5.10.0-e35f27394290-for-next+ #23
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
dump_stack+0xbc/0xf9
? btrfs_backref_cleanup_node+0x18a/0x420
print_address_description.constprop.8+0x21/0x210
? record_print_text.cold.34+0x11/0x11
? btrfs_backref_cleanup_node+0x18a/0x420
? btrfs_backref_cleanup_node+0x18a/0x420
kasan_report.cold.10+0x20/0x37
? btrfs_backref_cleanup_node+0x18a/0x420
__asan_load8+0x69/0x90
btrfs_backref_cleanup_node+0x18a/0x420
btrfs_backref_release_cache+0x83/0x1b0
relocate_block_group+0x394/0x780
? merge_reloc_roots+0x4a0/0x4a0
btrfs_relocate_block_group+0x26e/0x4c0
btrfs_relocate_chunk+0x52/0x120
btrfs_balance+0xe2e/0x1900
? check_flags.part.50+0x6c/0x1e0
? btrfs_relocate_chunk+0x120/0x120
? kmem_cache_alloc_trace+0xa06/0xcb0
? _copy_from_user+0x83/0xc0
btrfs_ioctl_balance+0x3a7/0x460
btrfs_ioctl+0x24c8/0x4360
? __kasan_check_read+0x11/0x20
? check_chain_key+0x1f4/0x2f0
? __asan_loadN+0xf/0x20
? btrfs_ioctl_get_supported_features+0x30/0x30
? kvm_sched_clock_read+0x18/0x30
? check_chain_key+0x1f4/0x2f0
? lock_downgrade+0x3f0/0x3f0
? handle_mm_fault+0xad6/0x2150
? do_vfs_ioctl+0xfc/0x9d0
? ioctl_file_clone+0xe0/0xe0
? check_flags.part.50+0x6c/0x1e0
? check_flags.part.50+0x6c/0x1e0
? check_flags+0x26/0x30
? lock_is_held_type+0xc3/0xf0
? syscall_enter_from_user_mode+0x1b/0x60
? do_syscall_64+0x13/0x80
? rcu_read_lock_sched_held+0xa1/0xd0
? __kasan_check_read+0x11/0x20
? __fget_light+0xae/0x110
__x64_sys_ioctl+0xc3/0x100
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f4c4bdfe427
RSP: 002b:00007fff33ee6df8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fff33ee6e98 RCX: 00007f4c4bdfe427
RDX: 00007fff33ee6e98 RSI: 00000000c4009420 RDI: 0000000000000003
RBP: 0000000000000003 R08: 0000000000000003 R09: 0000000000000078
R10: fffffffffffff59d R11: 0000000000000202 R12: 0000000000000001
R13: 0000000000000000 R14: 00007fff33ee8a34 R15: 0000000000000001
Allocated by task 28836:
kasan_save_stack+0x21/0x50
__kasan_kmalloc.constprop.18+0xbe/0xd0
kasan_kmalloc+0x9/0x10
kmem_cache_alloc_trace+0x410/0xcb0
btrfs_backref_alloc_node+0x46/0xf0
btrfs_backref_add_tree_node+0x60d/0x11d0
build_backref_tree+0xc5/0x700
relocate_tree_blocks+0x2be/0xb90
relocate_block_group+0x2eb/0x780
btrfs_relocate_block_group+0x26e/0x4c0
btrfs_relocate_chunk+0x52/0x120
btrfs_balance+0xe2e/0x1900
btrfs_ioctl_balance+0x3a7/0x460
btrfs_ioctl+0x24c8/0x4360
__x64_sys_ioctl+0xc3/0x100
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 28836:
kasan_save_stack+0x21/0x50
kasan_set_track+0x20/0x30
kasan_set_free_info+0x1f/0x30
__kasan_slab_free+0xf3/0x140
kasan_slab_free+0xe/0x10
kfree+0xde/0x200
btrfs_backref_error_cleanup+0x452/0x530
build_backref_tree+0x1a5/0x700
relocate_tree_blocks+0x2be/0xb90
relocate_block_group+0x2eb/0x780
btrfs_relocate_block_group+0x26e/0x4c0
btrfs_relocate_chunk+0x52/0x120
btrfs_balance+0xe2e/0x1900
btrfs_ioctl_balance+0x3a7/0x460
btrfs_ioctl+0x24c8/0x4360
__x64_sys_ioctl+0xc3/0x100
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff888112402900
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 80 bytes inside of
128-byte region [ffff888112402900, ffff888112402980)
The buggy address belongs to the page:
page:0000000028b1cd08 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888131c810c0 pfn:0x112402
flags: 0x17ffe0000000200(slab)
raw: 017ffe0000000200 ffffea000424f308 ffffea0007d572c8 ffff888100040440
raw: ffff888131c810c0 ffff888112402000 0000000100000009 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888112402800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888112402880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888112402900: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888112402980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888112402a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Link: https://lore.kernel.org/linux-btrfs/20201208194607.GI31381@hungrycats.org/
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The backref code is looking for a reloc_root that corresponds to the
given fs root. However any number of things could have gone wrong while
initializing that reloc_root, like ENOMEM while trying to allocate the
root itself, or EIO while trying to write the root item. This would
result in no corresponding reloc_root being in the reloc root cache, and
thus would return NULL when we do the find_reloc_root() call.
Because of this we do not want to WARN_ON(). This presumably was meant
to catch developer errors, cases where we messed up adding the reloc
root. However we can easily hit this case with error injection, and
thus should not do a WARN_ON().
CC: stable@vger.kernel.org # 5.10+
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While doing error injection testing with my relocation patches I hit the
following assert:
assertion failed: list_empty(&block_group->dirty_list), in fs/btrfs/block-group.c:3356
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.h:3357!
invalid opcode: 0000 [#1] SMP NOPTI
CPU: 0 PID: 24351 Comm: umount Tainted: G W 5.10.0-rc3+ #193
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
RIP: 0010:assertfail.constprop.0+0x18/0x1a
RSP: 0018:ffffa09b019c7e00 EFLAGS: 00010282
RAX: 0000000000000056 RBX: ffff8f6492c18000 RCX: 0000000000000000
RDX: ffff8f64fbc27c60 RSI: ffff8f64fbc19050 RDI: ffff8f64fbc19050
RBP: ffff8f6483bbdc00 R08: 0000000000000000 R09: 0000000000000000
R10: ffffa09b019c7c38 R11: ffffffff85d70928 R12: ffff8f6492c18100
R13: ffff8f6492c18148 R14: ffff8f6483bbdd70 R15: dead000000000100
FS: 00007fbfda4cdc40(0000) GS:ffff8f64fbc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fbfda666fd0 CR3: 000000013cf66002 CR4: 0000000000370ef0
Call Trace:
btrfs_free_block_groups.cold+0x55/0x55
close_ctree+0x2c5/0x306
? fsnotify_destroy_marks+0x14/0x100
generic_shutdown_super+0x6c/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20
deactivate_locked_super+0x36/0xa0
cleanup_mnt+0x12d/0x190
task_work_run+0x5c/0xa0
exit_to_user_mode_prepare+0x1b1/0x1d0
syscall_exit_to_user_mode+0x54/0x280
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This happened because I injected an error in btrfs_cow_block() while
running the dirty block groups. When we run the dirty block groups, we
splice the list onto a local list to process. However if an error
occurs, we only cleanup the transactions dirty block group list, not any
pending block groups we have on our locally spliced list.
In fact if we fail to allocate a path in this function we'll also fail
to clean up the splice list.
Fix this by splicing the list back onto the transaction dirty block
group list so that the block groups are cleaned up. Then add a 'out'
label and have the error conditions jump to out so that the errors are
handled properly. This also has the side-effect of fixing a problem
where we would clear 'ret' on error because we unconditionally ran
btrfs_run_delayed_refs().
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When recovering a relocation, if we run into a reloc root that has 0
refs we simply add it to the reloc_control->reloc_roots list, and then
clean it up later. The problem with this is __del_reloc_root() doesn't
do anything if the root isn't in the radix tree, which in this case it
won't be because we never call __add_reloc_root() on the reloc_root.
This exit condition simply isn't correct really. During normal
operation we can remove ourselves from the rb tree and then we're meant
to clean up later at merge_reloc_roots() time, and this happens
correctly. During recovery we're depending on free_reloc_roots() to
drop our references, but we're short-circuiting.
Fix this by continuing to check if we're on the list and dropping
ourselves from the reloc_control root list and dropping our reference
appropriately. Change the corresponding BUG_ON() to an ASSERT() that
does the correct thing if we aren't in the rb tree.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Comment for processed extent end of range has an unnecessary "in",
remove it.
Signed-off-by: Nigel Christian <nigel.l.christian@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
My recent patch set "A variety of lock contention fixes", found here
https://lore.kernel.org/linux-btrfs/cover.1608319304.git.josef@toxicpanda.com/
(Tracked in https://github.com/btrfs/linux/issues/86)
that reduce lock contention on the extent root by running delayed refs
less often resulted in a regression in generic/371. This test
fallocate()'s the fs until it's full, deletes all the files, and then
tries to fallocate() until full again.
Before these patches we would run all of the delayed refs during
flushing, and then would commit the transaction because we had plenty of
pinned space to recover in order to allocate. However my patches made
it so we weren't running the delayed refs as aggressively, which meant
that we appeared to have less pinned space when we were deciding to
commit the transaction.
We use the space_info->total_bytes_pinned to approximate how much space
we have pinned. It's approximate because if we remove a reference to an
extent we may free it, but there may be more references to it than we
know of at that point, but we account it as pinned at the creation time,
and then it's properly accounted when the delayed ref runs.
The way we account for pinned space is if the
delayed_ref_head->total_ref_mod is < 0, because that is clearly a
freeing option. However there is another case, and that is where
->total_ref_mod == 0 && ->must_insert_reserved == 1.
When we allocate a new extent, we have ->total_ref_mod == 1 and we have
->must_insert_reserved == 1. This is used to indicate that it is a
brand new extent and will need to have its extent entry added before we
modify any references on the delayed ref head. But if we subsequently
remove that extent reference, our ->total_ref_mod will be 0, and that
space will be pinned and freed. Accounting for this case properly
allows for generic/371 to pass with my delayed refs patches applied.
It's important to note that this problem exists without the referenced
patches, it just was uncovered by them.
CC: stable@vger.kernel.org # 5.10
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we pass things around to figure out if we maybe freeing data
based on the state of the delayed refs head. This makes the accounting
sort of confusing and hard to follow, as it's distinctly separate from
the delayed ref heads stuff, but also depends on it entirely.
Fix this by explicitly adjusting the space_info->total_bytes_pinned in
the delayed refs code. We now have two places where we modify this
counter, once where we create the delayed and destroy the delayed refs,
and once when we pin and unpin the extents. This means there is a
slight overlap between delayed refs and the pin/unpin mechanisms, but
this is simply used by the ENOSPC infrastructure to determine if we need
to commit the transaction, so there's no adverse affect from this, we
might simply commit thinking it will give us enough space when it might
not.
CC: stable@vger.kernel.org # 5.10
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that the btrfs' codebase is clean of almost all W=1 warnings let's
enable those checks unconditionally for the entire fs/btrfs/ and its
subdirectories to catch potential errors during development.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add some comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
This fixes warning:
fs/btrfs/zoned.c:491:6: warning: variable ‘zone_size’ set but not used [-Wunused-but-set-variable]
491 | u64 zone_size;
which got introduced in 12659251ca ("btrfs: implement log-structured
superblock for ZONED mode"). We'll enable the warning by default and
want clean build until the relevant zoned patches land.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This makes the file W=1 clean and fixes the following warnings:
fs/btrfs/extent_io.c:414: warning: Function parameter or member 'tree' not described in '__etree_search'
fs/btrfs/extent_io.c:414: warning: Function parameter or member 'offset' not described in '__etree_search'
fs/btrfs/extent_io.c:414: warning: Function parameter or member 'next_ret' not described in '__etree_search'
fs/btrfs/extent_io.c:414: warning: Function parameter or member 'prev_ret' not described in '__etree_search'
fs/btrfs/extent_io.c:414: warning: Function parameter or member 'p_ret' not described in '__etree_search'
fs/btrfs/extent_io.c:414: warning: Function parameter or member 'parent_ret' not described in '__etree_search'
fs/btrfs/extent_io.c:1607: warning: Function parameter or member 'tree' not described in 'find_contiguous_extent_bit'
fs/btrfs/extent_io.c:1607: warning: Function parameter or member 'start' not described in 'find_contiguous_extent_bit'
fs/btrfs/extent_io.c:1607: warning: Function parameter or member 'start_ret' not described in 'find_contiguous_extent_bit'
fs/btrfs/extent_io.c:1607: warning: Function parameter or member 'end_ret' not described in 'find_contiguous_extent_bit'
fs/btrfs/extent_io.c:1607: warning: Function parameter or member 'bits' not described in 'find_contiguous_extent_bit'
fs/btrfs/extent_io.c:1644: warning: Function parameter or member 'tree' not described in 'find_first_clear_extent_bit'
fs/btrfs/extent_io.c:1644: warning: Function parameter or member 'start' not described in 'find_first_clear_extent_bit'
fs/btrfs/extent_io.c:1644: warning: Function parameter or member 'start_ret' not described in 'find_first_clear_extent_bit'
fs/btrfs/extent_io.c:1644: warning: Function parameter or member 'end_ret' not described in 'find_first_clear_extent_bit'
fs/btrfs/extent_io.c:1644: warning: Function parameter or member 'bits' not described in 'find_first_clear_extent_bit'
fs/btrfs/extent_io.c:4187: warning: Function parameter or member 'epd' not described in 'extent_write_cache_pages'
fs/btrfs/extent_io.c:4187: warning: Excess function parameter 'data' description in 'extent_write_cache_pages'
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With these fixes space-info.c is clear for W=1 warnings, namely the
following ones are fixed:
fs/btrfs/space-info.c:575: warning: Function parameter or member 'fs_info' not described in 'may_commit_transaction'
fs/btrfs/space-info.c:575: warning: Function parameter or member 'space_info' not described in 'may_commit_transaction'
fs/btrfs/space-info.c:1231: warning: Function parameter or member 'fs_info' not described in 'handle_reserve_ticket'
fs/btrfs/space-info.c:1231: warning: Function parameter or member 'space_info' not described in 'handle_reserve_ticket'
fs/btrfs/space-info.c:1231: warning: Function parameter or member 'ticket' not described in 'handle_reserve_ticket'
fs/btrfs/space-info.c:1231: warning: Function parameter or member 'flush' not described in 'handle_reserve_ticket'
fs/btrfs/space-info.c:1315: warning: Function parameter or member 'fs_info' not described in '__reserve_bytes'
fs/btrfs/space-info.c:1315: warning: Function parameter or member 'space_info' not described in '__reserve_bytes'
fs/btrfs/space-info.c:1315: warning: Function parameter or member 'orig_bytes' not described in '__reserve_bytes'
fs/btrfs/space-info.c:1315: warning: Function parameter or member 'flush' not described in '__reserve_bytes'
fs/btrfs/space-info.c:1427: warning: Function parameter or member 'root' not described in 'btrfs_reserve_metadata_bytes'
fs/btrfs/space-info.c:1427: warning: Function parameter or member 'block_rsv' not described in 'btrfs_reserve_metadata_bytes'
fs/btrfs/space-info.c:1427: warning: Function parameter or member 'orig_bytes' not described in 'btrfs_reserve_metadata_bytes'
fs/btrfs/space-info.c:1427: warning: Function parameter or member 'flush' not described in 'btrfs_reserve_metadata_bytes'
fs/btrfs/space-info.c:1462: warning: Function parameter or member 'fs_info' not described in 'btrfs_reserve_data_bytes'
fs/btrfs/space-info.c:1462: warning: Function parameter or member 'bytes' not described in 'btrfs_reserve_data_bytes'
fs/btrfs/space-info.c:1462: warning: Function parameter or member 'flush' not described in 'btrfs_reserve_data_bytes'
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fixes following warnings:
fs/btrfs/delalloc-space.c:205: warning: Function parameter or member 'inode' not described in 'btrfs_inode_rsv_release'
fs/btrfs/delalloc-space.c:205: warning: Function parameter or member 'qgroup_free' not described in 'btrfs_inode_rsv_release'
fs/btrfs/delalloc-space.c:472: warning: Function parameter or member 'reserved' not described in 'btrfs_delalloc_release_space'
fs/btrfs/delalloc-space.c:472: warning: Function parameter or member 'qgroup_free' not described in 'btrfs_delalloc_release_space'
fs/btrfs/delalloc-space.c:472: warning: Excess function parameter 'release_bytes' description in 'btrfs_delalloc_release_space'
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fixes fs/btrfs/inode.c:3101: warning: Function parameter or member 'fs_info' not described in 'btrfs_wait_on_delayed_iputs'
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fixes fs/btrfs/block-group.c:1570: warning: Function parameter or member 'fs_info' not described in 'btrfs_rmap_block'
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fixes fs/btrfs/discard.c:203: warning: Function parameter or member 'now' not described in 'peek_discard_list'
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fixes following W=1 warnings:
fs/btrfs/free-space-cache.c:1317: warning: Function parameter or member 'root' not described in '__btrfs_write_out_cache'
fs/btrfs/free-space-cache.c:1317: warning: Function parameter or member 'inode' not described in '__btrfs_write_out_cache'
fs/btrfs/free-space-cache.c:1317: warning: Function parameter or member 'ctl' not described in '__btrfs_write_out_cache'
fs/btrfs/free-space-cache.c:1317: warning: Function parameter or member 'block_group' not described in '__btrfs_write_out_cache'
fs/btrfs/free-space-cache.c:1317: warning: Function parameter or member 'io_ctl' not described in '__btrfs_write_out_cache'
fs/btrfs/free-space-cache.c:1317: warning: Function parameter or member 'trans' not described in '__btrfs_write_out_cache'
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This fixes the following warnings:
fs/btrfs/delayed-ref.c:80: warning: Function parameter or member 'fs_info' not described in 'btrfs_delayed_refs_rsv_release'
fs/btrfs/delayed-ref.c:80: warning: Function parameter or member 'nr' not described in 'btrfs_delayed_refs_rsv_release'
fs/btrfs/delayed-ref.c:128: warning: Function parameter or member 'fs_info' not described in 'btrfs_migrate_to_delayed_refs_rsv'
fs/btrfs/delayed-ref.c:128: warning: Function parameter or member 'src' not described in 'btrfs_migrate_to_delayed_refs_rsv'
fs/btrfs/delayed-ref.c:128: warning: Function parameter or member 'num_bytes' not described in 'btrfs_migrate_to_delayed_refs_rsv'
fs/btrfs/delayed-ref.c:174: warning: Function parameter or member 'fs_info' not described in 'btrfs_delayed_refs_rsv_refill'
fs/btrfs/delayed-ref.c:174: warning: Function parameter or member 'flush' not described in 'btrfs_delayed_refs_rsv_refill'
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This fixes following W=1 warnings:
fs/btrfs/file-item.c:27: warning: Cannot understand * @inode: the inode we want to update the disk_i_size for
on line 27 - I thought it was a doc line
fs/btrfs/file-item.c:65: warning: Cannot understand * @inode - the inode we're modifying
on line 65 - I thought it was a doc line
fs/btrfs/file-item.c:91: warning: Cannot understand * @inode - the inode we're modifying
on line 91 - I thought it was a doc line
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This fixes the following compiler warnings:
fs/btrfs/extent_map.c:601: warning: Function parameter or member 'fs_info' not described in 'btrfs_add_extent_mapping'
fs/btrfs/extent_map.c:601: warning: Function parameter or member 'em_tree' not described in 'btrfs_add_extent_mapping'
fs/btrfs/extent_map.c:601: warning: Function parameter or member 'em_in' not described in 'btrfs_add_extent_mapping'
fs/btrfs/extent_map.c:601: warning: Function parameter or member 'start' not described in 'btrfs_add_extent_mapping'
fs/btrfs/extent_map.c:601: warning: Function parameter or member 'len' not described in 'btrfs_add_extent_mapping'
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fixes fs/btrfs/extent_map.c:399: warning: Function parameter or member
'modified' not described in 'add_extent_mapping'
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is a long existing bug in the last parameter of
btrfs_add_ordered_extent(), in commit 771ed689d2 ("Btrfs: Optimize
compressed writeback and reads") back to 2008.
In that ancient commit btrfs_add_ordered_extent() expects the @type
parameter to be one of the following:
- BTRFS_ORDERED_REGULAR
- BTRFS_ORDERED_NOCOW
- BTRFS_ORDERED_PREALLOC
- BTRFS_ORDERED_COMPRESSED
But we pass 0 in cow_file_range(), which means BTRFS_ORDERED_IO_DONE.
Ironically extra check in __btrfs_add_ordered_extent() won't set the bit
if we see (type == IO_DONE || type == IO_COMPLETE), and avoid any
obvious bug.
But this still leads to regular COW ordered extent having no bit to
indicate its type in various trace events, rendering REGULAR bit
useless.
[FIX]
Change the following aspects to avoid such problem:
- Reorder btrfs_ordered_extent::flags
Now the type bits go first (REGULAR/NOCOW/PREALLCO/COMPRESSED), then
DIRECT bit, finally extra status bits like IO_DONE/COMPLETE/IOERR.
- Add extra ASSERT() for btrfs_add_ordered_extent_*()
- Remove @type parameter for btrfs_add_ordered_extent_compress()
As the only valid @type here is BTRFS_ORDERED_COMPRESSED.
- Remove the unnecessary special check for IO_DONE/COMPLETE in
__btrfs_add_ordered_extent()
This is just to make the code work, with extra ASSERT(), there are
limited values can be passed in.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix below warnings reported by coccicheck:
./fs/btrfs/raid56.c:237:2-8: WARNING: NULL check before some freeing
functions is not needed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Yang Li <abaci-bugfix@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Zygo reported the following panic when testing my error handling patches
for relocation:
kernel BUG at fs/btrfs/backref.c:2545!
invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 3 PID: 8472 Comm: btrfs Tainted: G W 14
Hardware name: QEMU Standard PC (i440FX + PIIX,
Call Trace:
btrfs_backref_error_cleanup+0x4df/0x530
build_backref_tree+0x1a5/0x700
? _raw_spin_unlock+0x22/0x30
? release_extent_buffer+0x225/0x280
? free_extent_buffer.part.52+0xd7/0x140
relocate_tree_blocks+0x2a6/0xb60
? kasan_unpoison_shadow+0x35/0x50
? do_relocation+0xc10/0xc10
? kasan_kmalloc+0x9/0x10
? kmem_cache_alloc_trace+0x6a3/0xcb0
? free_extent_buffer.part.52+0xd7/0x140
? rb_insert_color+0x342/0x360
? add_tree_block.isra.36+0x236/0x2b0
relocate_block_group+0x2eb/0x780
? merge_reloc_roots+0x470/0x470
btrfs_relocate_block_group+0x26e/0x4c0
btrfs_relocate_chunk+0x52/0x120
btrfs_balance+0xe2e/0x18f0
? pvclock_clocksource_read+0xeb/0x190
? btrfs_relocate_chunk+0x120/0x120
? lock_contended+0x620/0x6e0
? do_raw_spin_lock+0x1e0/0x1e0
? do_raw_spin_unlock+0xa8/0x140
btrfs_ioctl_balance+0x1f9/0x460
btrfs_ioctl+0x24c8/0x4380
? __kasan_check_read+0x11/0x20
? check_chain_key+0x1f4/0x2f0
? __asan_loadN+0xf/0x20
? btrfs_ioctl_get_supported_features+0x30/0x30
? kvm_sched_clock_read+0x18/0x30
? check_chain_key+0x1f4/0x2f0
? lock_downgrade+0x3f0/0x3f0
? handle_mm_fault+0xad6/0x2150
? do_vfs_ioctl+0xfc/0x9d0
? ioctl_file_clone+0xe0/0xe0
? check_flags.part.50+0x6c/0x1e0
? check_flags.part.50+0x6c/0x1e0
? check_flags+0x26/0x30
? lock_is_held_type+0xc3/0xf0
? syscall_enter_from_user_mode+0x1b/0x60
? do_syscall_64+0x13/0x80
? rcu_read_lock_sched_held+0xa1/0xd0
? __kasan_check_read+0x11/0x20
? __fget_light+0xae/0x110
__x64_sys_ioctl+0xc3/0x100
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This occurs because of this check
if (RB_EMPTY_NODE(&upper->rb_node))
BUG_ON(!list_empty(&node->upper));
As we are dropping the backref node, if we discover that our upper node
in the edge we just cleaned up isn't linked into the cache that we are
now done with this node, thus the BUG_ON().
However this is an erroneous assumption, as we will look up all the
references for a node first, and then process the pending edges. All of
the 'upper' nodes in our pending edges won't be in the cache's rb_tree
yet, because they haven't been processed. We could very well have many
edges still left to cleanup on this node.
The fact is we simply do not need this check, we can just process all of
the edges only for this node, because below this check we do the
following
if (list_empty(&upper->lower)) {
list_add_tail(&upper->lower, &cache->leaves);
upper->lowest = 1;
}
If the upper node truly isn't used yet, then we add it to the
cache->leaves list to be cleaned up later. If it is still used then the
last child node that has it linked into its node will add it to the
leaves list and then it will be cleaned up.
Fix this problem by dropping this logic altogether. With this fix I no
longer see the panic when testing with error injection in the backref
code.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While testing the error paths in relocation, I hit the following lockdep
splat:
======================================================
WARNING: possible circular locking dependency detected
5.10.0-rc3+ #206 Not tainted
------------------------------------------------------
btrfs-balance/1571 is trying to acquire lock:
ffff8cdbcc8f77d0 (&head_ref->mutex){+.+.}-{3:3}, at: btrfs_lookup_extent_info+0x156/0x3b0
but task is already holding lock:
ffff8cdbc54adbf8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_lock+0x27/0x100
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (btrfs-tree-00){++++}-{3:3}:
down_write_nested+0x43/0x80
__btrfs_tree_lock+0x27/0x100
btrfs_search_slot+0x248/0x890
relocate_tree_blocks+0x490/0x650
relocate_block_group+0x1ba/0x5d0
kretprobe_trampoline+0x0/0x50
-> #1 (btrfs-csum-01){++++}-{3:3}:
down_read_nested+0x43/0x130
__btrfs_tree_read_lock+0x27/0x100
btrfs_read_lock_root_node+0x31/0x40
btrfs_search_slot+0x5ab/0x890
btrfs_del_csums+0x10b/0x3c0
__btrfs_free_extent+0x49d/0x8e0
__btrfs_run_delayed_refs+0x283/0x11f0
btrfs_run_delayed_refs+0x86/0x220
btrfs_start_dirty_block_groups+0x2ba/0x520
kretprobe_trampoline+0x0/0x50
-> #0 (&head_ref->mutex){+.+.}-{3:3}:
__lock_acquire+0x1167/0x2150
lock_acquire+0x116/0x3e0
__mutex_lock+0x7e/0x7b0
btrfs_lookup_extent_info+0x156/0x3b0
walk_down_proc+0x1c3/0x280
walk_down_tree+0x64/0xe0
btrfs_drop_subtree+0x182/0x260
do_relocation+0x52e/0x660
relocate_tree_blocks+0x2ae/0x650
relocate_block_group+0x1ba/0x5d0
kretprobe_trampoline+0x0/0x50
other info that might help us debug this:
Chain exists of:
&head_ref->mutex --> btrfs-csum-01 --> btrfs-tree-00
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(btrfs-tree-00);
lock(btrfs-csum-01);
lock(btrfs-tree-00);
lock(&head_ref->mutex);
*** DEADLOCK ***
5 locks held by btrfs-balance/1571:
#0: ffff8cdb89749ff8 (&fs_info->delete_unused_bgs_mutex){+.+.}-{3:3}, at: btrfs_balance+0x563/0xf40
#1: ffff8cdb89748838 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_relocate_block_group+0x156/0x300
#2: ffff8cdbc2c16650 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x413/0x5c0
#3: ffff8cdbc135f538 (btrfs-treloc-01){+.+.}-{3:3}, at: __btrfs_tree_lock+0x27/0x100
#4: ffff8cdbc54adbf8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_lock+0x27/0x100
stack backtrace:
CPU: 1 PID: 1571 Comm: btrfs-balance Not tainted 5.10.0-rc3+ #206
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack+0x8b/0xb0
check_noncircular+0xcf/0xf0
? trace_call_bpf+0x139/0x260
__lock_acquire+0x1167/0x2150
lock_acquire+0x116/0x3e0
? btrfs_lookup_extent_info+0x156/0x3b0
__mutex_lock+0x7e/0x7b0
? btrfs_lookup_extent_info+0x156/0x3b0
? btrfs_lookup_extent_info+0x156/0x3b0
? release_extent_buffer+0x124/0x170
? _raw_spin_unlock+0x1f/0x30
? release_extent_buffer+0x124/0x170
btrfs_lookup_extent_info+0x156/0x3b0
walk_down_proc+0x1c3/0x280
walk_down_tree+0x64/0xe0
btrfs_drop_subtree+0x182/0x260
do_relocation+0x52e/0x660
relocate_tree_blocks+0x2ae/0x650
? add_tree_block+0x149/0x1b0
relocate_block_group+0x1ba/0x5d0
elfcorehdr_read+0x40/0x40
? elfcorehdr_read+0x40/0x40
? btrfs_balance+0x796/0xf40
? __kthread_parkme+0x66/0x90
? btrfs_balance+0xf40/0xf40
? balance_kthread+0x37/0x50
? kthread+0x137/0x150
? __kthread_bind_mask+0x60/0x60
? ret_from_fork+0x1f/0x30
As you can see this is bogus, we never take another tree's lock under
the csum lock. This happens because sometimes we have to read tree
blocks from disk without knowing which root they belong to during
relocation. We defaulted to an owner of 0, which translates to an fs
tree. This is fine as all fs trees have the same class, but obviously
isn't fine if the block belongs to a COW only tree.
Thankfully COW only trees only have their owners root as a reference to
them, and since we already look up the extent information during
relocation, go ahead and check and see if this block might belong to a
COW only tree, and if so save the owner in the tree_block struct. This
allows us to read_tree_block with the proper owner, which gets rid of
this lockdep splat.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch will extract the code to grab an extent buffer from a page
into a helper, grab_extent_buffer_from_page().
This reduces one indent level, and provides the work place for later
expansion for subapge support.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The original comment is from the initial merge, which has several
problems:
- No holes check any more
- No inline decision is made
Update the out-of-date comment with more correct one.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The refactoring involves the following modifications:
- iosize alignment
In fact we don't really need to manually do alignment at all.
All extent maps should already be aligned, thus basic ASSERT() check
would be enough.
- redundant variables
We have extra variable like blocksize/pg_offset/end.
They are all unnecessary.
@blocksize can be replaced by sectorsize size directly, and it's only
used to verify the em start/size is aligned.
@pg_offset can be easily calculated using @cur and page_offset(page).
@end is just assigned from @page_end and never modified, use
"start + PAGE_SIZE - 1" directly and remove @page_end.
- remove some BUG_ON()s
The BUG_ON()s are for extent map, which we have tree-checker to check
on-disk extent data item and runtime check.
ASSERT() should be enough.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parameter offset is confusing, it's supposed to be the disk bytenr
of metadata/data. Rename it to disk_bytenr and update the comment.
Also rename each offset passed to submit_extent_page() as @disk_bytenr
so they're consistent.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The refactoring involves the following modifications:
- Return bool instead of int
- Parameter update for @cached of btrfs_dec_test_first_ordered_pending()
For btrfs_dec_test_first_ordered_pending(), @cached is only used to
return the finished ordered extent.
Rename it to @finished_ret.
- Comment updates
* Change one stale comment
Which still refers to btrfs_dec_test_ordered_pending(), but the
context is calling btrfs_dec_test_first_ordered_pending().
* Follow the common comment style for both functions
Add more detailed descriptions for parameters and the return value
* Move the reason why test_and_set_bit() is used into the call sites
- Change how the return value is calculated
The most anti-human part of the return value is:
if (...)
ret = 1;
...
return ret == 0;
This means, when we set ret to 1, the function returns 0.
Change the local variable name to @finished, and directly return the
value of it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_dio_private::bytes is only assigned from bio::bi_iter::bi_size,
which is never larger than U32.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Following the rework in e076ab2a2c ("btrfs: shrink delalloc pages
instead of full inodes") the nr variable is no longer passed by
reference to start_delalloc_inodes hence it cannot change. Additionally
we are always guaranteed for it to be positive number hence it's
redundant to have it as a condition in the loop. Simply remove that
usage.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's currently u64 which gets instantly translated either to LONG_MAX
(if U64_MAX is passed) or cast to an unsigned long (which is in fact,
wrong because writeback_control::nr_to_write is a signed, long type).
Just convert the function's argument to be long time which obviates the
need to manually convert u64 value to a long. Adjust all call sites
which pass U64_MAX to pass LONG_MAX. Finally ensure that in
shrink_delalloc the u64 is converted to a long without overflowing,
resulting in a negative number.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After commit 040ee6120c ("Btrfs: send, improve clone range") we do not
use anymore the data_offset field of struct backref_ctx, as after that we
do all the necessary checks for the data offset of file extent items at
clone_range(). Since there are no more users of data_offset from that
structure, remove it.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of having three 'if' to handle non-NULL return value consolidate
this in one 'if (ret)'. That way the code is more obvious:
- Always drop delete_unused_bgs_mutex if ret is not NULL
- If ret is negative -> goto done
- If it's 1 -> reset ret to 0, release the path and finish the loop.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I noticed that shared ref entries in ref-verify didn't have the proper
owner set, which caused me to think there was something seriously wrong.
However the problem is if we have a parent we simply weren't filling out
the owner part of the reference, even though we have it.
Fix this by making sure we set all the proper fields when we modify a
reference, this way we'll have the proper owner if a problem happens and
we don't waste time thinking we're updating the wrong level.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I noticed that sometimes I would have the wrong level printed out with
ref-verify while testing some error injection related problems. This is
because we only get the level from the main extent item, but our
references could go off the current leaf into another, and at that point
we lose our level.
Fix this by keeping track of the last tree block level that we found,
the same way we keep track of our bytenr and num_bytes, in case we
happen to wander into another leaf while still processing the references
for a bytenr.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I was attempting to reproduce a problem that Zygo hit, but my error
injection wasn't firing for a few of the common calls to
btrfs_should_cancel_balance. This is because the compiler decided to
inline it at these spots. Keep this from happening by explicitly
marking the function as noinline so that error injection will always
work.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following patches are going to address error handling in relocation,
in order to test those patches I need to be able to inject errors in
btrfs_search_slot and btrfs_cow_block, as we call both of these pretty
often in different cases during relocation.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's no longer used. While at it also remove new_dirid in create_subvol
as it's used in a single place and open code it. No functional changes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Adjust the way free_objectid is being initialized, it now stores
BTRFS_FIRST_FREE_OBJECTID rather than the, somewhat arbitrary,
BTRFS_FIRST_FREE_OBJECTID - 1. This change also has the added benefit
that now it becomes unnecessary to explicitly initialize free_objectid
for a newly create fs root.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This reflects the true purpose of the member as it's being used solely
in context where a new objectid is being allocated. Future changes will
also change the way it's being used to closely follow this semantics.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This better reflects the semantics of the function i.e no search is
performed whatsoever.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is used to initialize the in-memory
btrfs_root::highest_objectid member, which is used to get an available
objectid. Rename it to better reflect its semantics.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
First replace all inode instances with a pointer to btrfs_inode. This
removes multiple invocations of the BTRFS_I macro, subsequently remove
2 local variables as they are called only once and simply refer to
them directly.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Return value in __load_free_space_cache is not properly set after
(unlikely) memory allocation failures and 0 is returned instead.
This is not a problem for the caller load_free_space_cache because only
value 1 is considered as 'cache loaded' but for clarity it's better
to set the errors accordingly.
Fixes: a67509c300 ("Btrfs: add a io_ctl struct and helpers for dealing with the space cache")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While doing error injection I would sometimes get a corrupt file system.
This is because I was injecting errors at btrfs_search_slot, but would
only do it one time per stack. This uncovered a problem in
commit_fs_roots, where if we get an error we would just break. However
we're in a nested loop, the first loop being a loop to find all the
dirty fs roots, and then subsequent root updates would succeed clearing
the error value.
This isn't likely to happen in real scenarios, however we could
potentially get a random ENOMEM once and then not again, and we'd end up
with a corrupted file system. Fix this by moving the error checking
around a bit to the main loop, as this is the only place where something
will fail, and return the error as soon as it occurs.
With this patch my reproducer no longer corrupts the file system.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the page cache is invalid, then we can't do read-modify-write, so
ensure that we do clear it when we know it is invalid.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If we're doing a write, and the entire page lies beyond the end-of-file,
then we can assume the write can be extended to cover the beginning of
the page, since we know the data in that region will be all zeros.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We don't want to ask for the ACL in a WRITE reply, since we don't have
a preallocated buffer.
Instead of checking NFS_INO_INVALID_ACCESS, which is really about
managing the access cache, we should look at the value of
NFS_INO_INVALID_OTHER. Also ensure we assign the mode, owner and
owner_group flags to the correct bit mask.
Finally, fix up the check for NFS_INO_INVALID_CTIME to retrieve the
ctime, and add a check for NFS_INO_INVALID_CHANGE.
Fixes: 76bd5c016e ("NFSv4: make cache consistency bitmask dynamic")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For SQPOLL rings tctx_inflight() always returns zero, so it might skip
doing full cancelation. It's fine because we jam all sqpoll submissions
in any case and do go through files cancel for them, but not nice.
Do the intended full cancellation, by mimicking __io_uring_task_cancel()
waiting but impersonating SQPOLL task.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These functions always return '0' and no callers use the return value.
So make it a void function.
This eliminates the following coccicheck warning:
./fs/jfs/jfs_txnmgr.c:1365:5-7: Unneeded variable: "rc". Return "0" on
line 1414
./fs/jfs/jfs_txnmgr.c:1422:5-7: Unneeded variable: "rc". Return "0" on
line 1527
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Currently there is no way to differentiate the file with alive owner
from the file with dead owner but pid of the owner reused. That's why
CRIU can't actually know if it needs to restore file owner or not,
because if it restores owner but actual owner was dead, this can
introduce unexpected signals to the "false"-owner (which reused the
pid).
Let's change the api, so that F_GETOWN(EX) returns 0 in case actual
owner is dead already. This comports with the POSIX spec, which
states that a PID of 0 indicates that no signal will be sent.
Cc: Jeff Layton <jlayton@kernel.org>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Add support for an additional filesystem version (sb_fs_format = 1802).
When a filesystem with the new version is mounted, the filesystem
supports "trusted.*" xattrs.
In addition, version 1802 filesystems implement a form of forward
compatibility for xattrs: when xattrs with an unknown prefix (ea_type)
are found on a version 1802 filesystem, those attributes are not shown
by listxattr, and they are not accessible by getxattr, setxattr, or
removexattr.
This mechanism might turn out to be what we need in the future, but if
not, we can always bump the filesystem version and break compatibility
instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Andrew Price <anprice@redhat.com>
Turn on rgrplvb by default for sb_fs_format > 1801.
Mount options still have to override this so a new args field to
differentiate between 'off' and 'not specified' is added, and the new
default is applied only when it's not specified.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Add support for FS_VERITY_METADATA_TYPE_SIGNATURE to
FS_IOC_READ_VERITY_METADATA. This allows a userspace server program to
retrieve the built-in signature (if present) of a verity file for
serving to a client which implements fs-verity compatible verification.
See the patch which introduced FS_IOC_READ_VERITY_METADATA for more
details.
The ability for userspace to read the built-in signatures is also useful
because it allows a system that is using the in-kernel signature
verification to migrate to userspace signature verification.
This has been tested using a new xfstest which calls this ioctl via a
new subcommand for the 'fsverity' program from fsverity-utils.
Link: https://lore.kernel.org/r/20210115181819.34732-7-ebiggers@kernel.org
Reviewed-by: Victor Hsieh <victorhsieh@google.com>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add support for FS_VERITY_METADATA_TYPE_DESCRIPTOR to
FS_IOC_READ_VERITY_METADATA. This allows a userspace server program to
retrieve the fs-verity descriptor of a file for serving to a client
which implements fs-verity compatible verification. See the patch which
introduced FS_IOC_READ_VERITY_METADATA for more details.
"fs-verity descriptor" here means only the part that userspace cares
about because it is hashed to produce the file digest. It doesn't
include the signature which ext4 and f2fs append to the
fsverity_descriptor struct when storing it on-disk, since that way of
storing the signature is an implementation detail. The next patch adds
a separate metadata_type value for retrieving the signature separately.
This has been tested using a new xfstest which calls this ioctl via a
new subcommand for the 'fsverity' program from fsverity-utils.
Link: https://lore.kernel.org/r/20210115181819.34732-6-ebiggers@kernel.org
Reviewed-by: Victor Hsieh <victorhsieh@google.com>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add support for FS_VERITY_METADATA_TYPE_MERKLE_TREE to
FS_IOC_READ_VERITY_METADATA. This allows a userspace server program to
retrieve the Merkle tree of a verity file for serving to a client which
implements fs-verity compatible verification. See the patch which
introduced FS_IOC_READ_VERITY_METADATA for more details.
This has been tested using a new xfstest which calls this ioctl via a
new subcommand for the 'fsverity' program from fsverity-utils.
Link: https://lore.kernel.org/r/20210115181819.34732-5-ebiggers@kernel.org
Reviewed-by: Victor Hsieh <victorhsieh@google.com>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add an ioctl FS_IOC_READ_VERITY_METADATA which will allow reading verity
metadata from a file that has fs-verity enabled, including:
- The Merkle tree
- The fsverity_descriptor (not including the signature if present)
- The built-in signature, if present
This ioctl has similar semantics to pread(). It is passed the type of
metadata to read (one of the above three), and a buffer, offset, and
size. It returns the number of bytes read or an error.
Separate patches will add support for each of the above metadata types.
This patch just adds the ioctl itself.
This ioctl doesn't make any assumption about where the metadata is
stored on-disk. It does assume the metadata is in a stable format, but
that's basically already the case:
- The Merkle tree and fsverity_descriptor are defined by how fs-verity
file digests are computed; see the "File digest computation" section
of Documentation/filesystems/fsverity.rst. Technically, the way in
which the levels of the tree are ordered relative to each other wasn't
previously specified, but it's logical to put the root level first.
- The built-in signature is the value passed to FS_IOC_ENABLE_VERITY.
This ioctl is useful because it allows writing a server program that
takes a verity file and serves it to a client program, such that the
client can do its own fs-verity compatible verification of the file.
This only makes sense if the client doesn't trust the server and if the
server needs to provide the storage for the client.
More concretely, there is interest in using this ability in Android to
export APK files (which are protected by fs-verity) to "protected VMs".
This would use Protected KVM (https://lwn.net/Articles/836693), which
provides an isolated execution environment without having to trust the
traditional "host". A "guest" VM can boot from a signed image and
perform specific tasks in a minimum trusted environment using files that
have fs-verity enabled on the host, without trusting the host or
requiring that the guest has its own trusted storage.
Technically, it would be possible to duplicate the metadata and store it
in separate files for serving. However, that would be less efficient
and would require extra care in userspace to maintain file consistency.
In addition to the above, the ability to read the built-in signatures is
useful because it allows a system that is using the in-kernel signature
verification to migrate to userspace signature verification.
Link: https://lore.kernel.org/r/20210115181819.34732-4-ebiggers@kernel.org
Reviewed-by: Victor Hsieh <victorhsieh@google.com>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Now that fsverity_get_descriptor() validates the sig_size field,
fsverity_verify_signature() doesn't need to do it.
Just change the prototype of fsverity_verify_signature() to take the
signature directly rather than take a fsverity_descriptor.
Link: https://lore.kernel.org/r/20210115181819.34732-3-ebiggers@kernel.org
Reviewed-by: Victor Hsieh <victorhsieh@google.com>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Amy Parker <enbyamy@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
The FS_IOC_READ_VERITY_METADATA ioctl will need to return the fs-verity
descriptor (and signature) to userspace.
There are a few ways we could implement this:
- Save a copy of the descriptor (and signature) in the fsverity_info
struct that hangs off of the in-memory inode. However, this would
waste memory since most of the time it wouldn't be needed.
- Regenerate the descriptor from the merkle_tree_params in the
fsverity_info. However, this wouldn't work for the signature, nor for
the salt which the merkle_tree_params only contains indirectly as part
of the 'hashstate'. It would also be error-prone.
- Just get them from the filesystem again. The disadvantage is that in
general we can't trust that they haven't been maliciously changed
since the file has opened. However, the use cases for
FS_IOC_READ_VERITY_METADATA don't require that it verifies the chain
of trust. So this is okay as long as we do some basic validation.
In preparation for implementing the third option, factor out a helper
function fsverity_get_descriptor() which gets the descriptor (and
appended signature) from the filesystem and does some basic validation.
As part of this, start checking the sig_size field for overflow.
Currently fsverity_verify_signature() does this. But the new ioctl will
need this too, so do it earlier.
Link: https://lore.kernel.org/r/20210115181819.34732-2-ebiggers@kernel.org
Reviewed-by: Victor Hsieh <victorhsieh@google.com>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
-----BEGIN PGP SIGNATURE-----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=5FIb
-----END PGP SIGNATURE-----
Merge tag '5.11-rc6-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three small smb3 fixes for stable"
* tag '5.11-rc6-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: report error instead of invalid when revalidating a dentry fails
smb3: fix crediting for compounding when only one request in flight
smb3: Fix out-of-bounds bug in SMB2_negotiate()
-----BEGIN PGP SIGNATURE-----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=sGoQ
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.11-2021-02-05' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two small fixes that should go into 5.11:
- task_work resource drop fix (Pavel)
- identity COW fix (Xiaoguang)"
* tag 'io_uring-5.11-2021-02-05' of git://git.kernel.dk/linux-block:
io_uring: drop mm/files between task_work_submit
io_uring: don't modify identity's files uncess identity is cowed
Assuming
- //HOST/a is mounted on /mnt
- //HOST/b is mounted on /mnt/b
On a slow connection, running 'df' and killing it while it's
processing /mnt/b can make cifs_get_inode_info() returns -ERESTARTSYS.
This triggers the following chain of events:
=> the dentry revalidation fail
=> dentry is put and released
=> superblock associated with the dentry is put
=> /mnt/b is unmounted
This patch makes cifs_d_revalidate() return the error instead of 0
(invalid) when cifs_revalidate_dentry() fails, except for ENOENT (file
deleted) and ESTALE (file recreated).
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Suggested-by: Shyam Prasad N <nspmangalore@gmail.com>
Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com>
CC: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Patch fb6791d100 was designed to allow gfs2 to unmount quicker by
skipping the step where it tells dlm to unlock glocks in EX with lvbs.
This was done because when gfs2 unmounts a file system, it destroys the
dlm lockspace shortly after it destroys the glocks so it doesn't need to
unlock them all: the unlock is implied when the lockspace is destroyed
by dlm.
However, that patch introduced a use-after-free in dlm: as part of its
normal dlm_recoverd process, it can call ls_recovery to recover dead
locks. In so doing, it can call recover_rsbs which calls recover_lvb for
any mastered rsbs. Func recover_lvb runs through the list of lkbs queued
to the given rsb (if the glock is cached but unlocked, it will still be
queued to the lkb, but in NL--Unlocked--mode) and if it has an lvb,
copies it to the rsb, thus trying to preserve the lkb. However, when
gfs2 skips the dlm unlock step, it frees the glock and its lvb, which
means dlm's function recover_lvb references the now freed lvb pointer,
copying the freed lvb memory to the rsb.
This patch changes the check in gdlm_put_lock so that it calls
dlm_unlock for all glocks that contain an lvb pointer.
Fixes: fb6791d100 ("GFS2: skip dlm_unlock calls in unmount")
Cc: stable@vger.kernel.org # v3.8+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
If a new hugetlb page is allocated during fallocate it will not be
marked as active (set_page_huge_active) which will result in a later
isolate_huge_page failure when the page migration code would like to
move that page. Such a failure would be unexpected and wrong.
Only export set_page_huge_active, just leave clear_page_huge_active as
static. Because there are no external users.
Link: https://lkml.kernel.org/r/20210115124942.46403-3-songmuchun@bytedance.com
Fixes: 70c3547e36 (hugetlbfs: add hugetlbfs_fallocate())
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In gfs2_recover_one, fix a sd_log_flush_lock imbalance when a recovery
pass fails.
Fixes: c9ebc4b737 ("gfs2: allow journal replay to hold sd_log_flush_lock")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Current iov handling with recvmsg/sendmsg may be confusing. First make a
rule for msg->iov: either it points to an allocated iov that have to be
kfree()'d later, or it's NULL and we use fast_iov. That's much better
than current 3-state (also can point to fast_iov). And rename it into
free_iov for uniformity with read/write.
Also, instead of after struct io_async_msghdr copy fixing up of
msg.msg_iter.iov has been happening in io_recvmsg()/io_sendmsg(). Move
it into io_setup_async_msg(), that's the right place.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: add comment on NULL check before kfree()]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't pretend we don't know that REQ_F_BUFFER_SELECT for recvmsg always
uses fast_iov -- clean up confusing intermixing kmsg->iov and
kmsg->fast_iov for buffer select.
Also don't init iter with garbage in __io_recvmsg_copy_hdr() only for it
to be set shortly after in io_recvmsg().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_setup_async_msg() should fully prepare io_async_msghdr, let it also
handle assigning msg_name and don't hand code it in [send,recv]msg().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently we try to guess if a compound request is going to
succeed waiting for credits or not based on the number of
requests in flight. This approach doesn't work correctly
all the time because there may be only one request in
flight which is going to bring multiple credits satisfying
the compound request.
Change the behavior to fail a request only if there are no requests
in flight at all and proceed waiting for credits otherwise.
Cc: <stable@vger.kernel.org> # 5.1+
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since SQPOLL task can be shared and so task_work entries can be a mix of
them, we need to drop mm and files before trying to issue next request.
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYBuyTQAKCRDh3BK/laaZ
PBBhAPwLy3ksQLhY7in4I8aKrSyWRpaCSAeLQUitxnX3eQiQnAD/S1EEIapwradV
y4ou1PBRsGnhwNgArXODVCcTgqDJqw8=
=GjU4
-----END PGP SIGNATURE-----
Merge tag 'ovl-fixes-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
- Fix capability conversion and minor overlayfs bugs that are related
to the unprivileged overlay mounts introduced in this cycle.
- Fix two recent (v5.10) and one old (v4.10) bug.
- Clean up security xattr copy-up (related to a SELinux regression).
* tag 'ovl-fixes-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: implement volatile-specific fsync error behaviour
ovl: skip getxattr of security labels
ovl: fix dentry leak in ovl_get_redirect
ovl: avoid deadlock on directory ioctl
cap: fix conversions on getxattr
ovl: perform vfs_getxattr() with mounter creds
ovl: add warning on user_ns mismatch
While writing up a regression test for broken behavior when a chprojid
request fails, I noticed that we were logging corruption notices about
the root dquot of the group/project quota file at mount time when
testing V4 filesystems.
In commit afeda6000b, I was trying to improve ondisk dquot validation
by making sure that when we load an ondisk dquot into memory on behalf
of an incore dquot, the dquot id and type matches. Unfortunately, I
forgot that V4 filesystems only have two quota files, and can switch
that file between group and project quota types at mount time. When we
perform that switch, we'll try to load the default quota limits from the
root dquot prior to running quotacheck and log a corruption error when
the types don't match.
This is inconsequential because quotacheck will reset the second quota
file as part of doing the switch, but we shouldn't leave scary messages
in the kernel log.
Fixes: afeda6000b ("xfs: validate ondisk/incore dquot flags")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Saving one lock/unlock for io-wq is not super important, but adds some
ugliness in the code. More important, atomic decs not turning it to zero
for some archs won't give the right ordering/barriers so the
io_steal_work() may pretty easily get subtly and completely broken.
Return back 2-step io-wq work exchange and clean it up.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extract a helper io_fixed_file_slot() returning a place in our fixed
files table, so we don't hand-code it three times in the code.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_import_iovec() doesn't return IO size anymore, only error code. Make
it more apparent by returning int instead of ssize and clean up
leftovers.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make decision making of whether we need to retry read/write similar for
O_NONBLOCK and RWF_NOWAIT. Set REQ_F_NOWAIT when either is specified and
use it for all relevant checks. Also fix resubmitting NOWAIT requests
via io_rw_reissue().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We already have implicit do-while for read-retries but with goto in the
end. Convert it to an actual do-while, it highlights it so making a
bit more understandable and is cleaner in general.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_read() has not the simpliest control flow with a lot of jumps and
it's hard to read. One of those is a out_free: label, which frees iovec.
However, from the middle of io_read() iovec is NULL'ed and so
kfree(iovec) is no-op, it leaves us with two place where we can inline
it and further clean up the code.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have invariant in io_read() of how much we're trying to read spilled
into an iter and io_size variable. The last one controls decision making
about whether to do read-retries. However, io_size is modified only
after the first read attempt, so if we happen to go for a third retry in
a single call to io_read(), we will get io_size greater than in the
iterator, so may lead to various side effects up to live-locking.
Modify io_size each time.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now we give out ownership of iovec into io_setup_async_rw(), so it
either sets request's context right or frees the iovec on error itself.
Makes our life a bit easier at call sites.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
First, instead of checking iov_iter_count(iter) for 0 to find out that
all needed bytes were read, just compare returned code against io_size.
It's more reliable and arguably cleaner.
Also, place the half-read case into an else branch and delete an extra
label.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
!io_file_supports_async() case of io_read() is hard to read, it jumps
somewhere in the middle of the function just to do async setup and fail
on a similar check. Call io_setup_async_rw() directly for this case,
it's much easier to follow.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's easy to make a mistake in io_cqring_wait() because for all
break/continue clauses we need to watch for prepare/finish_wait to be
used correctly. Extract all those into a new helper
io_cqring_wait_schedule(), and transforming the loop into simple series
of func calls: prepare(); check_and_schedule(); finish();
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
schedule_timeout() with timeout=MAX_SCHEDULE_TIMEOUT is guaranteed to
work just as schedule(), so instead of hand-coding it based on arguments
always use the timeout version and simplify code.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Files and task cancellations go over same steps trying to cancel
requests in io-wq, poll, etc. Deduplicate it with a helper.
note: new io_uring_try_cancel_requests() is former
__io_uring_cancel_task_requests() with files passed as an agrument and
flushing overflowed requests.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the case where we need to do an interior node split, and
immediately afterwards, we are unable to allocate a new directory leaf
block due to ENOSPC, the directory index checksum's will not be filled
in correctly (and indeed, will not be correctly journalled).
This looks like a bug that was introduced when we added largedir
support. The original code doesn't make any sense (and should have
been caught in code review), but it was hidden because most of the
time, the index node checksum will be set by do_split(). But if
do_split bails out due to ENOSPC, then ext4_handle_dirty_dx_node()
won't get called, and so the directory index checksum field will not
get set, leading to:
EXT4-fs error (device sdb): dx_probe:858: inode #6635543: block 4022: comm nfsd: Directory index failed checksum
Google-Bug-Id: 176345532
Fixes: e08ac99fa2 ("ext4: add largedir feature")
Cc: Artem Blagodarenko <artem.blagodarenko@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Added "ckpt_thread_ioprio" sysfs node to give a way to change checkpoint
merge daemon's io priority. Its default value is "be,3", which means
"BE" I/O class and I/O priority "3". We can select the class between "rt"
and "be", and set the I/O priority within valid range of it.
"," delimiter is necessary in between I/O class and priority number.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge",
which creates a kernel daemon and makes it to merge concurrent checkpoint
requests as much as possible to eliminate redundant checkpoint issues. Plus,
we can eliminate the sluggish issue caused by slow checkpoint operation
when the checkpoint is done in a process context in a cgroup having
low i/o budget and cpu shares. To make this do better, we set the
default i/o priority of the kernel daemon to "3", to give one higher
priority than other kernel threads. The below verification result
explains this.
The basic idea has come from https://opensource.samsung.com.
[Verification]
Android Pixel Device(ARM64, 7GB RAM, 256GB UFS)
Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20)
Set "strict_guarantees" to "1" in BFQ tunables
In "fg" cgroup,
- thread A => trigger 1000 checkpoint operations
"for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1;
done"
- thread B => gererating async. I/O
"fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1
--filename=test_img --name=test"
In "bg" cgroup,
- thread C => trigger repeated checkpoint operations
"echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file;
fsync test_dir2; done"
We've measured thread A's execution time.
[ w/o patch ]
Elapsed Time: Avg. 68 seconds
[ w/ patch ]
Elapsed Time: Avg. 48 seconds
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
[Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The mp variable in xfs_file_compat_ioctl is only used when
BROKEN_X86_ALIGNMENT is define. Remove it and just open code the
dereference in a few places.
Link: https://lore.kernel.org/r/20210203173009.462205-1-christian.brauner@ubuntu.com
Fixes: f736d93d76 ("xfs: support idmapped mounts")
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
If uid or gid of mount options is larger than INT_MAX, udf_fill_super will
return -EINVAL.
The problem can be encountered by a domain user or reproduced via:
mount -o loop,uid=2147483648 something-in-udf-format.iso /mnt
This can be fixed as commit 233a01fa9c ("fuse: handle large user and
group ID").
Link: https://lore.kernel.org/r/20210129045502.10546-1-bingjingc@synology.com
Reviewed-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Chung-Chiang Cheng <cccheng@synology.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: Jan Kara <jack@suse.cz>
If uid or gid of mount options is larger than INT_MAX, isofs_fill_super
will return -EINVAL.
The problem can be encountered by a domain user or reproduced via:
mount -o loop,uid=2147483648 ubuntu-16.04.6-server-amd64.iso /mnt
This can be fixed as commit 233a01fa9c ("fuse: handle large user and
group ID").
Link: https://lore.kernel.org/r/20210129045315.10375-1-bingjingc@synology.com
Reviewed-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Chung-Chiang Cheng <cccheng@synology.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Andreas Gruenbacher