Convert the kobj_map code to use a mutex instead of a semaphore. It
converts the single two users as well, genhd.c and char_dev.c.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We don't need to pin ->key down; ->cfqq->cfqd will do that for us.
Incidentally, that stops the leak we had - that reference was never
dropped.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If somebody does a hash lookup for cfq_queue while ioprio of an async queue
is elevated, they shouldn't end up stuck with lowered ioprio when we go back.
Fix is to use ->org_ioprio{,class} in hash lookups.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The low level PCI DMA mapping functions should handle it in most cases.
This should fix problems with depleting the DMA zone early. The old
code used precious GFP_DMA memory in many cases where it was not needed.
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
During testing of SLES10, we encountered a hang in the CFQ io scheduler.
Turns out the deferred slice expiry logic is buggy, so remove that for
now. We could be left with an idle queue that would never wake up. So
kill that logic, always expire immediately. Also fix a potential timer
race condition.
Patch looks bigger than it is, because it moves a function.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
q->ordcolor must only be flipped on initial queueing of a hardbarrier
request.
Constructing ordered sequence and requeueing used to pass through
__elv_add_request() which flips q->ordcolor when it sees a barrier
request.
This patch separates out elv_insert() from __elv_add_request() and uses
elv_insert() when constructing ordered sequence and requeueing.
elv_insert() inserts the given request at the specified position and
does nothing else.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When issuing an SG_IO ioctl through sd that resulted in an unrecoverable
error, a nearly infinite retry loop was discovered. This is due to the
fact that the block layer SG_IO code is not setting up rq->retries. This
patch also fixes up the sg_scsi_ioctl path.
Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
q->ordcolor must not be flipped on SOFTBARRIER.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Previously, if a fs request which was being drained failed and got
requeued, blk_do_ordered() didn't allow it to be reissued, which causes
queue stall. This patch makes blk_do_ordered() use the sequence of each
request to determine whether a request can be issued or not. This fixes
the bug and simplifies code.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
percpu_data blindly allocates bootmem memory to store NR_CPUS instances of
cpudata, instead of allocating memory only for possible cpus.
As a preparation for changing that, we need to convert various 0 -> NR_CPUS
loops to use for_each_cpu().
(The above only applies to users of asm-generic/percpu.h. powerpc has gone it
alone and is presently only allocating memory for present CPUs, so it's
currently corrupting memory).
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Jens Axboe <axboe@suse.de>
Cc: Anton Blanchard <anton@samba.org>
Acked-by: William Irwin <wli@holomorphy.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Record I/O timing statistics
The start time is added to struct dm_io, an existing structure allocated
privately internally within dm and attached to each incoming bio.
We export disk_round_stats() from block/ll_rw_blk.c instead of creating a
private clone.
Signed-off-by: Jun'ichi "Nick" Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This makes XFS barrier mounts succeed on my SCSI system.
Signed-off-by: Tetsuo Takata <takatatt@intellilink.co.jp>
Signed-off-by: Jens Axboe <axboe@suse.de>
Jens has decided that allowing the default scheduler to be a module is
a bug, and should not be allowed under kconfig. However, I find that
scenario useful for debugging, and wish for the kernel to be able to
handle this situation without OOPSing, if I enable such an option in
the .config directly. This patch dynamically checks for the presence
of the compiled-in default, and falls back to no-op, emitting a
suitable error message, when the default is not available
Tested for a range of boot options on 2.6.16-rc1-mm2.
Signed-off-by: Nate Diller <nate.diller@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
My previous default iosched patch did a poor job dealing with the
'elevator=' boot-time option. The old behavior falls back to the
compiled-in default if the requested one is not registered at boot
time. This patch dynamically evaluates which default
to use, and emits a suitable error message when the requested scheduler
is not available. It also does the 'as' -> 'anticipatory' conversion
before elevator registration, which along with a modified registration
function, allows it to correctly indicate which default scheduler is
in use.
Tested for a range of boot options on 2.6.16-rc1-mm2.
Signed-off-by: Nate Diller <nate.diller@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
A Christoph suggested that the /proc/devices file be converted to use the
seq_file interface. This patch does that.
I've obxerved one or two installation that had sufficiently large sans that
they overran the 4k limit on /proc/devices.
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If ordered tag isn't supported, request ordering for barrier
sequencing is performed by queue draining, which basically hangs the
request queue until elv_completed_request() reports completion of all
previous fs requests.
The condition check in elv_completed_request() was only performed for
fs requests. If a special request is queued between the last
to-be-drained request and the barrier sequence, draining is never
completed and the queue is stalled forever.
This patch moves the end-of-draining condition check such that it's
performed for all requests.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Move capable() from sched.h to capability.h;
- Use <linux/capability.h> where capable() is used
(in include/, block/, ipc/, kernel/, a few drivers/,
mm/, security/, & sound/;
many more drivers/ to go)
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Request completion can be a quite heavy process, since it needs to
iterate through the entire request and complete the bio's it holds.
This patch adds blk_complete_request() which moves this processing
into a dedicated block softirq.
Signed-off-by: Jens Axboe <axboe@suse.de>
It's a broken interface, it's done way too late. And apparently it triggers
slab problems in recent kernels as well (most likely after the generic dispatch
code was merged). So kill it, ide-cd is the only user of it.
Signed-off-by: Jens Axboe <axboe@suse.de>
HDIO_GETGEO is implemented in most block drivers, and all of them have to
duplicate the code to copy the structure to userspace, as well as getting
the start sector. This patch moves that to common code [1] and adds a
->getgeo method to fill out the raw kernel hd_geometry structure. For many
drivers this means ->ioctl can go away now.
[1] the s390 block drivers are odd in this respect. xpram sets ->start
to 4 always which seems more than odd, and the dasd driver shifts
the start offset around, probably because of it's non-standard
sector size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@suse.de>
Cc: <mike.miller@hp.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Sanitize some s390 Kconfig options. We have ARCH_S390, ARCH_S390X,
ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT. Replace these 6 options by
S390, 64BIT and COMPAT.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Reimplement handling of barrier requests.
* Flexible handling to deal with various capabilities of
target devices.
* Retry support for falling back.
* Tagged queues which don't support ordered tag can do ordered.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
Separate out bio initialization part from __make_request. It
will be used by the following blk_ordered_reimpl.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
add @uptodate argument to end_that_request_last() and @error
to rq_end_io_fn(). there's no generic way to pass error code
to request completion function, making generic error handling
of non-fs request difficult (rq->errors is driver-specific and
each driver uses it differently). this patch adds @uptodate
to end_that_request_last() and @error to rq_end_io_fn().
for fs requests, this doesn't really matter, so just using the
same uptodate argument used in the last call to
end_that_request_first() should suffice. imho, this can also
help the generic command-carrying request jens is working on.
Signed-off-by: tejun heo <htejun@gmail.com>
Signed-Off-By: Jens Axboe <axboe@suse.de>
Jes Sorensen