Commit Graph

146091 Commits

Author SHA1 Message Date
Linus Torvalds 78b170f45b Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] update mach-types
  [ARM] Add cmpxchg support for ARMv6+ systems (v5)
  [ARM] barriers: improve xchg, bitops and atomic SMP barriers
  Gemini: Fix SRAM/ROM location after memory swap
  MAINTAINER: Add F: entries for Gemini and FA526
  [ARM] disable NX support for OABI-supporting kernels
  [ARM] add coherent DMA mask for mv643xx_eth
  [ARM] pxa/palm: fix PalmLD/T5/TX AC97 MFP
  [ARM] pxa: add parameter to clksrc_read() for pxa168/910
  [ARM] pxa: fix the incorrectly defined drive strength macros for pxa{168,910}
  [ARM] Orion: Remove explicit name for platform device resources
  [ARM] Kirkwood: Correct MPP for SATA activity/presence LEDs of QNAP TS-119/TS-219.
  [ARM] pxa/ezx: fix pin configuration for low power mode
  [ARM] pxa/spitz: provide spitz_ohci_exit() that unregisters USB_HOST GPIO
  [ARM] pxa: enable GPIO receivers after configuring pins
  [ARM] pxa: allow gpio_reset drive high during normal work
  [ARM] pxa: save/restore PGSR on suspend/resume.
2009-05-29 16:07:39 -07:00
Linus Torvalds 5606b7f925 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI Hotplug: acpiphp: don't store a pci_dev in acpiphp_func
2009-05-29 12:17:03 -07:00
Arnaldo Carvalho de Melo b78c07d45a perf_counter tools: Shorten the DSO names using cwd
[acme@emilia linux-2.6-tip]$ pwd
/home/acme/git/linux-2.6-tip

Before (still available using -P/--full-paths)

[acme@emilia linux-2.6-tip]$ perf report -P | head -10
    11.48%             perf: 7454 [kernel]: clear_page_c
     4.89%             perf: 7454 [kernel]: vsnprintf
     4.61%             perf: 7454 /home/acme/git/linux-2.6-tip/Documentation/perf_counter/perf: dso__find_symbol
     4.09%             perf: 7454 [kernel]: number
     4.06%             perf: 7454 /home/acme/git/linux-2.6-tip/Documentation/perf_counter/perf: dso__fprintf
     4.00%             perf: 7454 /home/acme/git/linux-2.6-tip/Documentation/perf_counter/perf: symbol_filter

New default:

[acme@emilia linux-2.6-tip]$ perf report | head -10
    11.48%             perf: 7454 [kernel]: clear_page_c
     4.89%             perf: 7454 [kernel]: vsnprintf
     4.61%             perf: 7454 ./Documentation/perf_counter/perf: dso__find_symbol
     4.09%             perf: 7454 [kernel]: number
     4.06%             perf: 7454 ./Documentation/perf_counter/perf: dso__fprintf
     4.00%             perf: 7454 ./Documentation/perf_counter/perf: symbol_filter

Suggested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090529164859.GN4747@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 19:14:08 +02:00
Linus Torvalds 3218911f83 Merge git://git.infradead.org/~dwmw2/mtd-2.6.30
* git://git.infradead.org/~dwmw2/mtd-2.6.30:
  jffs2: Fix corruption when flash erase/write failure
  mtd: MXC NAND driver fixes (v5)
2009-05-29 08:52:13 -07:00
Linus Torvalds b939e414f0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  Revert "USB: Correct Makefile to make isp1760 buildable"
  usb-serial: fix crash when sub-driver updates firmware
  USB: isp1760: urb_dequeue doesn't always find the urbs
  USB: Yet another Conexant Clone to add to cdc-acm.c
  USB: atmel_usb_udc: Use kzalloc() to allocate ep structures
  USB: atmel-usba-udc : fix control out requests.
2009-05-29 08:50:15 -07:00
Linus Torvalds deeb103412 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  Driver Core: do not oops when driver_unregister() is called for unregistered drivers
  sysfs: file.c: use create_singlethread_workqueue()
2009-05-29 08:49:52 -07:00
Linus Torvalds c8bce3d3bd Merge branch 'for-2.6.30' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.30' of git://linux-nfs.org/~bfields/linux:
  svcrdma: dma unmap the correct length for the RPCRDMA header page.
  nfsd: Revert "svcrpc: take advantage of tcp autotuning"
  nfsd: fix hung up of nfs client while sync write data to nfs server
2009-05-29 08:49:09 -07:00
Linus Torvalds 5f789cd8ba Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: libps2 - better handle bad scheduler decisions
  Input: usb1400_ts - fix access to "device data" in resume function
  Input: multitouch - augment event semantics documentation
  Input: multitouch - add tracking ID to the protocol
2009-05-29 08:48:25 -07:00
Linus Torvalds 3da9e9d34e Merge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  i915: Set object to gtt domain when faulting it back in
  drm/i915: Apply a big hammer to 865 GEM object CPU cache flushing.
  drm/i915: Fix tiling pitch handling on 8xx.
2009-05-29 08:48:13 -07:00
Linus Torvalds 44ada1a147 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Compaq Presario CQ60 patching for Conexant
  sound: usb-audio: make the MotU Fastlane work again
  ALSA: Enable PCM hw_ptr_jiffies check only in xrun_debug mode
  ALSA: Fix invalid jiffies check after pause
2009-05-29 08:47:53 -07:00
Alan Cox b8e7e40abe 8250: Fix oops from setserial
If you setserial a port which has never been initialised we change the type
but don't update the I/O method pointers. The same problem is true if you
change the io type of a port - but nobody ever does that so nobody noticed!

Remember the old type and when attaching if the type has changed reload the
port accessor pointers. We can't do it blindly as some 8250 drivers load custom
accessors and we must not stomp those.

Tested-by: Victor Seryodkin <vvscore@gmail.com>
Closes-bug: #13367
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:42:38 -07:00
Harry Ciao 715fe7af9f edac: AMD8111 & AMD8131 Kconfig fixup
The amd8111_edac.c driver will fail allmodconfig on architectures other
than PPC, introduce Kconfig dependency to avoid this, since both AMD8111
and AMD8131 chips are only adopted on Maple so far.

Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:03 -07:00
Harry Ciao 56ec0c7b88 edac: AMD8111 & AMD8131 use dev_name()
The "bus_id" member in the device structure has been obsolete, use
dev_name() instead.

Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:03 -07:00
Nikanth Karthikesan 46f7e602fb memcg: fix build warning and avoid checking for mem != null again and again
Fix build warning, "mem_cgroup_is_obsolete defined but not used" when
CONFIG_DEBUG_VM is not set.  Also avoid checking for !mem again and again.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:03 -07:00
Mel Gorman f83a275dbc mm: account for MAP_SHARED mappings using VM_MAYSHARE and not VM_SHARED in hugetlbfs
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13302

hugetlbfs reserves huge pages but does not fault them at mmap() time to
ensure that future faults succeed.  The reservation behaviour differs
depending on whether the mapping was mapped MAP_SHARED or MAP_PRIVATE.
For MAP_SHARED mappings, hugepages are reserved when mmap() is first
called and are tracked based on information associated with the inode.
Other processes mapping MAP_SHARED use the same reservation.  MAP_PRIVATE
track the reservations based on the VMA created as part of the mmap()
operation.  Each process mapping MAP_PRIVATE must make its own
reservation.

hugetlbfs currently checks if a VMA is MAP_SHARED with the VM_SHARED flag
and not VM_MAYSHARE.  For file-backed mappings, such as hugetlbfs,
VM_SHARED is set only if the mapping is MAP_SHARED and the file was opened
read-write.  If a shared memory mapping was mapped shared-read-write for
populating of data and mapped shared-read-only by other processes, then
hugetlbfs would account for the mapping as if it was MAP_PRIVATE.  This
causes processes to fail to map the file MAP_SHARED even though it should
succeed as the reservation is there.

This patch alters mm/hugetlb.c and replaces VM_SHARED with VM_MAYSHARE
when the intent of the code was to check whether the VMA was mapped
MAP_SHARED or MAP_PRIVATE.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <starlight@binnacle.cx>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:03 -07:00
Mel Gorman 32b154c0b0 x86: ignore VM_LOCKED when determining if hugetlb-backed page tables can be shared or not
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13302

On x86 and x86-64, it is possible that page tables are shared beween
shared mappings backed by hugetlbfs.  As part of this,
page_table_shareable() checks a pair of vma->vm_flags and they must match
if they are to be shared.  All VMA flags are taken into account, including
VM_LOCKED.

The problem is that VM_LOCKED is cleared on fork().  When a process with a
shared memory segment forks() to exec() a helper, there will be shared
VMAs with different flags.  The impact is that the shared segment is
sometimes considered shareable and other times not, depending on what
process is checking.

What happens is that the segment page tables are being shared but the
count is inaccurate depending on the ordering of events.  As the page
tables are freed with put_page(), bad pmd's are found when some of the
children exit.  The hugepage counters also get corrupted and the Total and
Free count will no longer match even when all the hugepage-backed regions
are freed.  This requires a reboot of the machine to "fix".

This patch addresses the problem by comparing all flags except VM_LOCKED
when deciding if pagetables should be shared or not for hugetlbfs-backed
mapping.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <starlight@binnacle.cx>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:03 -07:00
Nicolas Ferre 53b7479bbd atmel_lcdfb: correct fifo size for some products
Remove wrong fifo size definition for some AT91 products.

Due to a misunderstanding of some AT91 datasheets, a fifo size of 2048
(words) has been introduced by mistake.  In fact, all products (AT91/AT32)
are sharing the same fifo size of 512 words.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:03 -07:00
Marek Szyprowski 17663e5970 S3C-fb: PM fix
Correctly restore the FrameBuffer register state in the resume function.

Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:03 -07:00
Alexander Beregalov 8e8e8267f0 serial: 8250_gsc: fix printk format error
drivers/serial/8250_gsc.c:44: warning: format '%lx' expects type
'long unsigned int', but argument 2 has type 'resource_size_t'

[akpm@linux-foundation.org: fix it to handle u64's]
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
Alexander Beregalov b5d598b41a parport_gsc: fix printk format error
drivers/parport/parport_gsc.c:356: warning: format '%lx' expects type
'long unsigned int', but argument 2 has type 'resource_size_t'

[akpm@linux-foundation.org: fix it to handle u64's]
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
Oskar Schirmer c3dc5bec05 flat: fix data sections alignment
The flat loader uses an architecture's flat_stack_align() to align the
stack but assumes word-alignment is enough for the data sections.

However, on the Xtensa S6000 we have registers up to 128bit width
which can be used from userspace and therefor need userspace stack and
data-section alignment of at least this size.

This patch drops flat_stack_align() and uses the same alignment that
is required for slab caches, ARCH_SLAB_MINALIGN, or wordsize if it's
not defined by the architecture.

It also fixes m32r which was obviously kaput, aligning an
uninitialized stack entry instead of the stack pointer.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Oskar Schirmer <os@emlix.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Johannes Weiner <jw@emlix.com>
Acked-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
Thomas Dahlmann ba9447198b MAINTAINERS: change email address for Thomas Dahlmann
Signed-off-by: Thomas <dahlmann.thomas@arcor.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
Roel Kluin b898f4f869 drivers/serial/mpc52xx_uart.c: fix array overindexing check
The check for an overindexing of mpc52xx_uart_{ports,nodes} has an
off-by-one.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
Daisuke Nishimura e767e0561d memcg: fix deadlock between lock_page_cgroup and mapping tree_lock
mapping->tree_lock can be acquired from interrupt context.  Then,
following dead lock can occur.

Assume "A" as a page.

 CPU0:
       lock_page_cgroup(A)
		interrupted
			-> take mapping->tree_lock.
 CPU1:
       take mapping->tree_lock
		-> lock_page_cgroup(A)

This patch tries to fix above deadlock by moving memcg's hook to out of
mapping->tree_lock.  charge/uncharge of pagecache/swapcache is protected
by page lock, not tree_lock.

After this patch, lock_page_cgroup() is not called under mapping->tree_lock.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
KOSAKI Motohiro bd6daba909 procfs: make errno values consistent when open pident vs exit(2) race occurs
proc_pident_instantiate() has following call flow.

proc_pident_lookup()
  proc_pident_instantiate()
    proc_pid_make_inode()

And, proc_pident_lookup() has following error handling.

	const struct pid_entry *p, *last;
	error = ERR_PTR(-ENOENT);
	if (!task)
		goto out_no_task;

Then, proc_pident_instantiate should return ENOENT too when racing against
exit(2) occur.

EINAL has two bad reason.
  - it implies caller is wrong. bad the race isn't caller's mistake.
  - man 2 open don't explain EINVAL. user often don't handle it.

Note: Other proc_pid_make_inode() caller already use ENOENT properly.

Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
Alexey Dobriyan b2e1feaf0a cred: #include init.h in cred.h
linux/cred.h can't be included as first header (alphabetical order)
because it uses __init which is enough to break compilation on some archs.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:01 -07:00
David Rientjes 6d2661ede5 oom: fix possible oom_dump_tasks NULL pointer
When /proc/sys/vm/oom_dump_tasks is enabled, it is possible to get a NULL
pointer for tasks that have detached mm's since task_lock() is not held
during the tasklist scan.  Add the task_lock().

Acked-by: Nick Piggin <npiggin@suse.de>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:01 -07:00
Joe Perches 681a1b4032 MAINTAINERS: pair EDAC-E752X P: and M: entries
Entries should be P: name then M: email address.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:01 -07:00
Peter Zijlstra bbbee90829 perf_counter: Ammend cleanup in fork() fail
When fork() fails we cannot use perf_counter_exit_task() since that
assumes to operate on current. Write a new helper that cleans up
unused/clean contexts.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 16:21:52 +02:00
Peter Zijlstra 665c2142a9 perf_counter: Clean up task_ctx vs interrupts
Remove the local_irq_save() etc.. in routines that are smp function
calls, or have IRQs disabled by other means.

Then change the COMM, MMAP, and swcounter context iteration to
current->perf_counter_ctxp and RCU, since it really doesn't matter
which context they iterate, they're all folded.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 16:21:51 +02:00
Peter Zijlstra efb3d17240 perf_counter: Fix COMM and MMAP events for cpu wide counters
Commit a63eaf34ae ("perf_counter: Dynamically allocate tasks'
perf_counter_context struct") broke COMM and MMAP notification for
cpu wide counters by dropping out early if there was no task context,
thereby also not iterating the cpu context.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 16:21:51 +02:00
Ingo Molnar 012b84dae1 perf_counter: Robustify counter-free logic
This fixes a nasty crash and highlights a bug that we were
freeing failed-fork() counters incorrectly.

(the fix for that will come separately)

[ Impact: fix crashes/lockups with inherited counters ]

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 14:28:37 +02:00
Ingo Molnar 3f4dee2273 perf_counter: Fix cpuctx->task_ctx races
Peter noticed that we are sometimes reading cpuctx->task_ctx with
interrupts enabled.

Noticed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 14:28:36 +02:00
John W. Linville aeeab4ff06 rtl8187: add USB ID for Linksys WUSB54GC-EU v2 USB wifi dongle
http://bugzilla.kernel.org/show_bug.cgi?id=13383

Reported-by: Przemyslaw Kulczycki <azrael@autocom.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-29 12:41:01 +02:00
John W. Linville 21a4cc00e8 at76c50x-usb: avoid mutex deadlock in at76_dwork_hw_scan
http://bugzilla.kernel.org/show_bug.cgi?id=13312

at76_dwork_hw_scan holds a mutex while calling ieee80211_scan_completed,
which then calls at76_config which needs the same mutex.  This reworks
the ordering to not hold the lock while calling ieee80211_scan_completed.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-29 12:41:01 +02:00
Joakim Tjernlund 81e2962801 jffs2: Fix corruption when flash erase/write failure
Erase errors such as:
"Newly-erased block contained word 0xa4ef223e at offset 0x0296a014"
and failure to write the clean marker,
moves the offending erase block to erasing list before calling
jffs2_erase_failed(). This is bad as jffs2_erase_failed() will
also move the block to the bad_list, but is now moving the
wrong block, causing FS corruption.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-29 10:44:46 +01:00
Vladimir Barinov 8541c1180a mtd: MXC NAND driver fixes (v5)
The following patch fixes:
 - re-initialization of host->col_addr which is used as byte index
   between the successive READID flash commands.
 - compile error when CONFIG_PM is enabled
 - pass on the error code from clk_get()
 - return -ENOMEM in case of failed ioremap()
 - pass on the return value of platform_driver_probe() directly
 - remove excessive printk
 - let command line partition table parsing with mxc_nand name.
   The cmd_line parsing is done via <mtd-id> name that differs
   from mxc_nand by default and looks like "NAND 256MiB 1,8V 8-bit"

Signed-off-by: Vladimir Barinov <vbarinov@embeddedalley.com>
Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-29 10:44:05 +01:00
Russell King a35197a8be Merge branch 'for-rmk' of git://gitorious.org/linux-gemini/mainline 2009-05-29 10:19:22 +01:00
Russell King 6daad5c6c5 [ARM] update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-29 10:15:08 +01:00
Paul Mackerras ad3a37de81 perf_counter: Don't swap contexts containing locked mutex
Peter Zijlstra pointed out that under some circumstances, we can take
the mutex in a context or a counter and then swap that context or
counter to another task, potentially leading to lock order inversions
or the mutexes not protecting what they are supposed to protect.

This fixes the problem by making sure that we never take a mutex in a
context or counter which could get swapped to another task.  Most of
the cases where we take a mutex is on a top-level counter or context,
i.e. a counter which has an fd associated with it or a context that
contains such a counter.  This adds WARN_ON_ONCE statements to verify
that.

The two cases where we need to take the mutex on a context that is a
clone of another are in perf_counter_exit_task and
perf_counter_init_task.  The perf_counter_exit_task case is solved by
uncloning the context before starting to remove the counters from it.
The perf_counter_init_task is a little trickier; we temporarily
disable context swapping for the parent (forking) task by setting its
ctx->parent_gen to the all-1s value after locking the context, if it
is a cloned context, and restore the ctx->parent_gen value at the end
if the context didn't get uncloned in the meantime.

This also moves the increment of the context generation count to be
within the same critical section, protected by the context mutex, that
adds the new counter to the context.  That way, taking the mutex is
sufficient to ensure that both the counter list and the generation
count are stable.

[ Impact: fix hangs, races with inherited and PID counters ]

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <18975.31580.520676.619896@drongo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 11:02:46 +02:00
Finn Thain 4e0168fa48 mac8390: fix build with NET_POLL_CONTROLLER
Fix the build for CONFIG_NET_POLL_CONTROLLER that I broke with
217cbfa856 ("mac8390: fix regression
caused during net_device_ops conversion").

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29 01:56:35 -07:00
Divy Le Ray c22c814931 cxgb3: link fault fixes
Do not call t3_link_fault() under spinlock, as it calls msleep().
Besides, only the access to pi->link_fault needs to be serialized.

Also initialize local variables before checking the link status,
link state fields might otherwise end up containing garbage.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29 01:54:41 -07:00
Divy Le Ray 10b6d95612 cxgb3: fix dma mapping regression
Commit 5e68b772e6
  cxgb3: map entire Rx page, feed map+offset to Rx ring.

introduced a regression on platforms defining DECLARE_PCI_UNMAP_ADDR()
and related macros as no-ops.

Rx descriptors are fed with the a page buffer bus address + page chunk offset.
The page buffer bus address is set and retrieved through
pci_unamp_addr_set(), pci_unmap_addr().
These functions being meaningless on x86 (if CONFIG_DMA_API_DEBUG is not set).
The HW ends up with a bogus bus address.

This patch saves the page buffer bus address for all plaftorms.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29 01:54:37 -07:00
Ingo Molnar be1ac0d81d perf_counter tools: Also display time-normalized stat results
Add new column that normalizes counter results by
'nanoseconds spent running' unit.

Before:

 Performance counter stats for '/home/mingo/hackbench':

   10469.403605  task clock ticks     (msecs)
          75502  context switches     (events)
           9501  CPU migrations       (events)
          36158  pagefaults           (events)
    31975676185  CPU cycles           (events)
    26257738659  instructions         (events)
      108740581  cache references     (events)
       54606088  cache misses         (events)

 Wall-clock time elapsed:   810.514504 msecs

After:

 Performance counter stats for '/home/mingo/hackbench':

   10469.403605  task clock ticks     (msecs)
          75502  context switches     #        0.007 M/sec
           9501  CPU migrations       #        0.001 M/sec
          36158  pagefaults           #        0.003 M/sec
    31975676185  CPU cycles           #     3054.202 M/sec
    26257738659  instructions         #     2508.045 M/sec
      108740581  cache references     #       10.387 M/sec
       54606088  cache misses         #        5.216 M/sec

 Wall-clock time elapsed:   810.514504 msecs

The advantage of that column is that it is characteristic of the
execution workflow, regardless of runtime. Hence 'hackbench 10'
will look similar to 'hackbench 15' - while the absolute counter
values are very different.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 09:46:45 +02:00
Ingo Molnar 2996f5ddb7 perf_counter tools: Split display into reading and printing
We introduce the extra pass to allow the print-out to possibly
rely on already read counters.

[ Impact: cleanup ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 09:21:49 +02:00
Ingo Molnar c04f5e5d7b perf_counter tools: Clean up builtin-stat.c's do_perfstat()
[ Impact: cleanup ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 09:11:49 +02:00
Yong Wang c323d95fa4 perf_counter/x86: Always use NMI for performance-monitoring interrupt
Always use NMI for performance-monitoring interrupt as there could be
racy situations if we switch between irq and nmi mode frequently.

Signed-off-by: Yong Wang <yong.y.wang@intel.com>
LKML-Reference: <20090529052835.GA13657@ywang-moblin2.bj.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 09:04:58 +02:00
Mike Galbraith da417a7537 perf_counter tools: Fix top symbol table max_ip typo
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 09:03:57 +02:00
Mike Galbraith a3ec8d70f1 perf_counter tools: Fix top symbol table dump typo
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 09:03:56 +02:00
Len Brown 2f102607ac i7300_idle: allow testing on i5000-series hardware w/o re-compile
Testing the i7300_idle driver on i5000-series hardware required
an edit to i7300_idle.h to "#define SUPPORT_I5000 1" and a re-build
of both i7300_idle and ioat_dma.

Replace that build-time scheme with a load-time module parameter:
"7300_idle.forceload=1" to make it easier to test the driver
on hardware that while not officially validated, works fine
and is much more commonly available.

By default (no modparam) the driver will continue to load
only on the i7300.

Note that ioat_dma runs a copy of i7300_idle's probe routine
to know to reserve an IOAT channel for i7300_idle.
This change makes ioat_dma do that always on the i5000,
just like it does on the i7300.

Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Andrew Henroid <andrew.d.henroid@intel.com>
2009-05-28 20:52:40 -04:00