The assumption that sizeof(uid_t) is the same as sizeof(gid_t) is
completely reasonable but since we can verify the condition at
compile time.
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The cifs protocol has a 64bit space for uids and gids, while linux
only supports a 32bit space today. Instead of silently truncating
64bit cifs ids, replace cifs ids that do not fit in the 32bit linux
id space with the default uid and gids for the cifs mount.
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
When it goes to error through line 144, the memory allocated to *devname is
not freed, and the caller doesn't free it either in line 250. So we free the
memroy of *devname in function cifs_compose_mount_options() when it goes to
error.
Signed-off-by: Cong Ding <dinggnu@gmail.com>
CC: stable <stable@kernel.org>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Steve French <sfrench@samba.org>
CC: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
srcip_matches() previously had code like this:
srcip_matches(..., struct sockaddr *rhs) {
/* ... */
struct sockaddr_in6 *vaddr6 = (struct sockaddr_in6 *) &rhs;
return ipv6_addr_equal(..., &vaddr6->sin6_addr);
}
which interpreted the values on the stack after the 'rhs' pointer as an
ipv6 address. The correct thing to do is to use 'rhs', not '&rhs'.
Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
If we have mandatory byte-range locks on a file we can't cache reads
because pagereading may have conflicts with these locks on the server.
That's why we should allow level2 oplocks for files without mandatory
locks only.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
If we have a read oplock and set a read lock in it, we can't write to the
locked area - so, filemap_fdatawrite may fail with a no information for a
userspace application even if we request a write to non-locked area. Fix
this by writing directly to the server and then breaking oplock level from
level2 to None.
Also remove CONFIG_CIFS_SMB2 ifdefs because it's suitable for both CIFS
and SMB2 protocols.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
that solution has data races and can end up two identical writes to the
server: when clientCanCacheAll value can be changed during the execution
of __generic_file_aio_write.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
When a call goes out, the signing code adjusts the sequence number
upward by two to account for the request and the response. An NT_CANCEL
however doesn't get a response of its own, it just hurries the server
along to get it to respond to the original request more quickly.
Therefore, we must adjust the sequence number back down by one after
signing a NT_CANCEL request.
Cc: <stable@vger.kernel.org>
Reported-by: Tim Perry <tdparmor-sambabugs@yahoo.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
It's always set to "1" and there's no way to change it to anything else.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Oliver reported that commit cd60042c caused his cifs mounts to
continually thrash through new inodes on readdir. His servers are not
sending inode numbers (or he's not using them), and the new test in
that function doesn't account for that sort of setup correctly.
If we're not using server inode numbers, then assume that the inode
attached to the dentry hasn't changed. Go ahead and update the
attributes in place, but keep the same inode number.
Cc: <stable@vger.kernel.org> # v3.5+
Reported-and-Tested-by: Oliver Mössinger <Oliver.Moessinger@ichaus.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Dan reported the following regression in commit d387a5c5:
+ fs/cifs/connect.c:1903 cifs_parse_mount_options() error: double free of 'string'
That patch has some of the new option parsing code free "string" without
setting the variable to NULL afterward. Since "string" is automatically
freed in an error condition, fix the code to just rely on that instead
of freeing it explicitly.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
But the kernel decided to call it "origin" instead. Fix most of the
sites.
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull security subsystem updates from James Morris:
"A quiet cycle for the security subsystem with just a few maintenance
updates."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
Smack: create a sysfs mount point for smackfs
Smack: use select not depends in Kconfig
Yama: remove locking from delete path
Yama: add RCU to drop read locking
drivers/char/tpm: remove tasklet and cleanup
KEYS: Use keyring_alloc() to create special keyrings
KEYS: Reduce initial permissions on keys
KEYS: Make the session and process keyrings per-thread
seccomp: Make syscall skipping and nr changes more consistent
key: Fix resource leak
keys: Fix unreachable code
KEYS: Add payload preparsing opportunity prior to key instantiate or update
Pull trivial branch from Jiri Kosina:
"Usual stuff -- comment/printk typo fixes, documentation updates, dead
code elimination."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
HOWTO: fix double words typo
x86 mtrr: fix comment typo in mtrr_bp_init
propagate name change to comments in kernel source
doc: Update the name of profiling based on sysfs
treewide: Fix typos in various drivers
treewide: Fix typos in various Kconfig
wireless: mwifiex: Fix typo in wireless/mwifiex driver
messages: i2o: Fix typo in messages/i2o
scripts/kernel-doc: check that non-void fcts describe their return value
Kernel-doc: Convention: Use a "Return" section to describe return values
radeon: Fix typo and copy/paste error in comments
doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
various: Fix spelling of "asynchronous" in comments.
Fix misspellings of "whether" in comments.
eisa: Fix spelling of "asynchronous".
various: Fix spelling of "registered" in comments.
doc: fix quite a few typos within Documentation
target: iscsi: fix comment typos in target/iscsi drivers
treewide: fix typo of "suport" in various comments and Kconfig
treewide: fix typo of "suppport" in various comments
...
If we have a read oplock and set a read lock in it, we can't write to the
locked area - so, filemap_fdatawrite may fail with a no information for a
userspace application even if we request a write to non-locked area. Fix
this by populating the page cache without marking affected pages dirty
after a successful write directly to the server.
Also remove CONFIG_CIFS_SMB2 ifdefs because it's suitable for both CIFS
and SMB2 protocols.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
This should fix a regression that was introduced when the new mount
option parser went in. Also, when the unc= and prefixpath= options
are provided, check their values against the ones we parsed from
the device string. If they differ, then throw a warning that tells
the user that we're using the values from the unc= option for now,
but that that will change in 3.10.
Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Currently the code takes care to ensure that the prefixpath has a
leading '/' delimiter. What if someone passes us a prefixpath with a
leading '\\' instead? The code doesn't properly handle that currently
AFAICS.
Let's just change the code to skip over any leading delimiter character
when copying the prepath. Then, fix up the users of the prepath option
to prefix it with the correct delimiter when they use it.
Also, there's no need to limit the length of the prefixpath to 1k. If
the server can handle it, why bother forbidding it?
Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Make sure we free any existing memory allocated for vol->UNC, just in
case someone passes in multiple unc= options.
Get rid of the check for too long a UNC. The check for >300 bytes seems
arbitrary. We later copy this into the tcon->treeName, for instance and
it's a lot shorter than 300 bytes.
Eliminate an extra kmalloc and copy as well. Just set the vol->UNC
directly with the contents of match_strdup.
Establish that the UNC should be stored with '\\' delimiters. Use
convert_delimiter to change it in place in the vol->UNC.
Finally, move the check for a malformed UNC into
cifs_parse_mount_options so we can catch that situation earlier.
Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The authority fields are supposed to be represented by a single 48-bit
value. It's also supposed to represent the value as hex if it's equal to
or greater than 2^32. This is documented in MS-DTYP, section 2.4.2.1.
Also, fix up the max string length to account for this fix.
Acked-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
SMB2 and later will return only 1 credit for session setup (phase 1)
not just for the negotiate protocol response. Do not disable
echoes and oplocks on session setup (we only need one credit
for tree connection anyway) as a resonse with only 1 credit
on phase 1 of sessionsetup is expected.
Fixes the "CIFS VFS: disabling echoes and oplocks" message
logged to dmesg.
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Jeff Layton <jlayton@samba.org>
Restructure code to make SMB2 vs. SMB3 signing a protocol
specific op. SMB3 signing (AES_CMAC) is not enabled yet,
but this restructuring at least makes sure we don't send
an smb2 signature on an smb3 signed connection. A followon
patch will add AES_CMAC and enable smb3 signing.
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Jeff Layton <jlayton@samba.org>
A SID could potentially be embedded inside of payload.value if there are
no subauthorities, and the arch has 8 byte pointers. Allow for that
possibility there.
While we're at it, rephrase the "embedding" check in terms of
key->payload to allow for the possibility that the union might change
size in the future.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
It was hardcoded to 192 bytes, which was not enough when the max number
of subauthorities went to 15. Redefine this constant in terms of sizeof
the structs involved, and rename it for better clarity.
While we're at it, remove a couple more unused constants from cifsacl.h.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Now that we aren't so rigid about the length of the key being passed
in, we need to be a bit more rigorous about checking the length of
the actual data against the claimed length (a'la num_subauths field).
Check for the case where userspace sends us a seemingly valid key
with a num_subauths field that goes beyond the end of the array. If
that happens, return -EIO and invalidate the key.
Also change the other places where we check for malformed keys in this
code to invalidate the key as well.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The cifs.idmap keytype always allocates memory to hold the payload from
userspace. In the common case where we're translating a SID to a UID or
GID, we're allocating memory to hold something that's less than or equal
to the size of a pointer.
When the payload is the same size as a pointer or smaller, just store
it in the payload.value union member instead. That saves us an extra
allocation on the sid_to_id upcall.
Note that we have to take extra care to check the datalen when we
go to dereference the .data pointer in the union, but the callers
now check that as a matter of course anyway.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The cifs.idmap handling code currently causes the kernel to cache the
data from userspace twice. It first looks in a rbtree to see if there is
a matching entry for the given id. If there isn't then it calls
request_key which then checks its cache and then calls out to userland
if it doesn't have one. If the userland program establishes a mapping
and downcalls with that info, it then gets cached in the keyring and in
this rbtree.
Aside from the double memory usage and the performance penalty in doing
all of these extra copies, there are some nasty bugs in here too. The
code declares four rbtrees and spinlocks to protect them, but only seems
to use two of them. The upshot is that the same tree is used to hold
(eg) uid:sid and sid:uid mappings. The comparitors aren't equipped to
deal with that.
I think we'd be best off to remove a layer of caching in this code. If
this was originally done for performance reasons, then that really seems
like a premature optimization.
This patch does that -- it removes the rbtrees and the locks that
protect them and simply has the code do a request_key call on each call
into sid_to_id and id_to_sid. This greatly simplifies this code and
should roughly halve the memory utilization from using the idmapping
code.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
by using cifs_invalidate_mapping rather than invalidate_remote_inode
in cifs_oplock_break - this invalidates all inode pages and resets
fscache cookies.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
We don't need to permit a write to the area locked with a read lock
by any process including the process that issues the write.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
The caller doesn't do anything with the dentry, so there's no point in
holding a reference to it on return. Also cifs_prime_dcache better
describes the actual purpose of the function.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
This can reduce the size of the module by ~120KB which
could be useful for embedded systems.
$ size fs/cifs/built-in.o*
text data bss dec hex filename
388567 34459 100440 523466 7fcca fs/cifs/built-in.o.new
495970 34599 117904 648473 9e519 fs/cifs/built-in.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Make the compilation work again when CIFS_DEBUG is not #define'd.
Add format and argument verification for the various macros when
CIFS_DEBUG is not #define'd.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
We were checking incorrectly if signatures were required to be sent,
so were always sending signatures after the initial session establishment.
For SMB3 mounts (vers=3.0) this was a problem because we were putting
SMB2 signatures in SMB3 requests which would cause access denied
on mount (the tree connection would fail).
This might also be worth considering for stable (for 3.7), as the
error message on mount (access denied) is confusing to users and
there is no workaround if the server is configured to only
support smb3.0. I am ok either way.
CC: stable <stable@kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
It uses an undefined KERN_EVENT and is itself unused.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Currently, the code relies on the callers to do that and they all do,
but this will ensure that it's always done.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Now that the smb_vol contains the destination sockaddr, there's no need
to pass it in separately.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Take advantage of accelerated strchr() on arches that support it.
Also, no caller ever passes in a NULL pointer. Get rid of the unneeded
NULL pointer check.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Passing this around as a string is contorted and painful. Instead, just
convert these to a sockaddr as soon as possible, since that's how we're
going to work with it later anyway.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Otherwise, "ls -l" will simply show the ownership of the files as
the default mnt_uid/gid. This may make "ls -l" performance on large
directories super-suck in some cases, but that's the cost of cifsacl.
One possibility to make it suck less would be to somehow proactively
dispatch the ACL requests asynchronously from readdir codepath, but
that's non-trivial to implement.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The option to have a blank "pass=" already exists, and with
a password specified both "pass=%s" and "password=%s" are supported.
Also, both blank "user=" and "username=" are supported, making
"password=" the odd man out.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
This patch enables optional for original SMB2 (SMB2.02) dialect
by specifying vers=2.0 on mount.
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
If we netogiate mandatory locking style, have a read lock and try
to set a write lock we end up with a write lock in vfs cache and
no lock in cifs lock cache - that's wrong. Fix it by returning
from cifs_setlk immediately if a error occurs during setting a lock.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
that reacquires byte-range locks when a file is reopened.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
because the is no difference here. This also adds support of prefixpath
mount option for SMB2.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Error out with a clear error message if there is no unc= option. The
existing code doesn't handle this in a clear fashion, and the check for
a UNCip option with no UNC string is just plain wrong.
Later, we'll fix the code to not require a unc= option, but for now we
need this to at least clarify why people are getting errors about DFS
parsing. With this change we can also get rid of some later NULL pointer
checks since we know the UNC and UNCip will never be NULL there.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
If we're using cifsacl, then we don't want to override the uid/gid with
the current uid/gid, since that would prevent you from being able to
upcall for this info.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
...and make those symbols static in cifsacl.c. Nothing outside
of that file refers to them.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The format specifiers are for signed values, but these are unsigned.
Given that '-' is a delimiter between fields, I don't think you'd get
what you'd expect if you got a value here that would overflow the sign
bit.
The version and authority fields are 8 bit values so use a "hh" length
modifier there. The subauths are 32 bit values, so there's no need to
use a "l" length modifier there.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
According to several places on the Internet and the samba winbind code,
this is hard limited to 15 in windows, not 5. This does balloon out
the allocation of each by 40 bytes, but I don't see any alternative.
Also, rename it to SID_MAX_SUB_AUTHORITIES to match the alleged name
of this constant in the windows header files
Finally, rename SIDLEN to SID_STRING_MAX, fix the value to reflect
the change to SID_MAX_SUB_AUTHORITIES and document how it was
determined.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
...and lift the restriction in id_to_sid upcall that the size must be
at least as big as a full cifs_sid.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
..nothing outside of cifsacl.c calls it. Also fix the incorrect
comment on the function. It returns 0 when they match.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
...instead of hardcoding in '5' and '6' all over the place.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Add a label we can goto on error, and get rid of some excess indentation.
Also move to kernel-style comments.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Most of these are unsigned ints, so we should be passing "uint" to
module_param. Also, get rid of the extra "(bool)" in the description
of enable_oplocks.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
We had planned to upgrade to ntlmv2 security a few releases ago,
and have been warning users in dmesg on mount about the impending
upgrade, but had to make a change (to use nltmssp with ntlmv2) due
to testing issues with some non-Windows, non-Samba servers.
The approach in this patch is simpler than earlier patches,
and changes the default authentication mechanism to ntlmv2
password hashes (encapsulated in ntlmssp) from ntlm (ntlm is
too weak for current use and ntlmv2 has been broadly
supported for many, many years).
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Pull vfs fixes from Al Viro:
"A bunch of fixes; the last one is this cycle regression, the rest are
-stable fodder."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix off-by-one in argument passed by iterate_fd() to callbacks
lookup_one_len: don't accept . and ..
cifs: get rid of blind d_drop() in readdir
nfs_lookup_revalidate(): fix a leak
don't do blind d_drop() in nfs_prime_dcache()
Commit 6bdf6dbd66 caused a regression
in setattr codepath that leads to files with wrong attributes.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Commit eddb079deb created a regression in the writepages codepath.
Previously, whenever it needed to check the size of the file, it did so
by consulting the inode->i_size field directly. With that patch, the
i_size was fetched once on entry into the writepages code and that value
was used henceforth.
If the file is changing size though (for instance, if someone is writing
to it or has truncated it), then that value is likely to be wrong. This
can lead to data corruption. Pages past the EOF at the time that the
writepages call was issued may be silently dropped and ignored because
cifs_writepages wrongly assumes that the file must have been truncated
in the interim.
Fix cifs_writepages to properly fetch the size from the inode->i_size
field instead to properly account for this possibility.
Original bug report is here:
https://bugzilla.kernel.org/show_bug.cgi?id=50991
Reported-and-Tested-by: Maxim Britov <ungifted01@gmail.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
We do not need to lookup a hashed negative directory since we have
already revalidated it before and have found it to be fine.
This also prevents a crash in cifs_lookup() when it attempts to rehash
the already hashed negative lookup dentry.
The patch has been tested using the reproducer at
https://bugzilla.redhat.com/show_bug.cgi?id=867344#c28
Cc: <stable@kernel.org> # 3.6.x
Reported-by: Vit Zahradka <vit.zahradka@tiscali.cz>
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
The userspace cifs.idmap program generally works with the wbclient libs
to generate binary SIDs in userspace. That program defines the struct
that holds these values as having a max of 15 subauthorities. The kernel
idmapping code however limits that value to 5.
When the kernel copies those values around though, it doesn't sanity
check the num_subauths value handed back from userspace or from the
server. It's possible therefore for userspace to hand us back a bogus
num_subauths value (or one that's valid, but greater than 5) that could
cause the kernel to walk off the end of the cifs_sid->sub_auths array.
Fix this by defining a new routine for copying sids and using that in
all of the places that copy it. If we end up with a sid that's longer
than expected then this approach will just lop off the "extra" subauths,
but that's basically what the code does today already. Better approaches
might be to fix this code to reject SIDs with >5 subauths, or fix it
to handle the subauths array dynamically.
At the same time, change the kernel to check the length of the data
returned by userspace. If it's shorter than struct cifs_sid, reject it
and return -EIO. If that happens we'll end up with fields that are
basically uninitialized.
Long term, it might make sense to redefine cifs_sid using a flexarray at
the end, to allow for variable-length subauth lists, and teach the code
to handle the case where the subauths array being passed in from
userspace is shorter than 5 elements.
Note too, that I don't consider this a security issue since you'd need
a compromised cifs.idmap program. If you have that, you can do all sorts
of nefarious stuff. Still, this is probably reasonable for stable.
Cc: stable@kernel.org
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Pull module signing support from Rusty Russell:
"module signing is the highlight, but it's an all-over David Howells frenzy..."
Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG.
* 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits)
X.509: Fix indefinite length element skip error handling
X.509: Convert some printk calls to pr_devel
asymmetric keys: fix printk format warning
MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking
MODSIGN: Make mrproper should remove generated files.
MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs
MODSIGN: Use the same digest for the autogen key sig as for the module sig
MODSIGN: Sign modules during the build process
MODSIGN: Provide a script for generating a key ID from an X.509 cert
MODSIGN: Implement module signature checking
MODSIGN: Provide module signing public keys to the kernel
MODSIGN: Automatically generate module signing keys if missing
MODSIGN: Provide Kconfig options
MODSIGN: Provide gitignore and make clean rules for extra files
MODSIGN: Add FIPS policy
module: signature checking hook
X.509: Add a crypto key parser for binary (DER) X.509 certificates
MPILIB: Provide a function to read raw data into an MPI
X.509: Add an ASN.1 decoder
X.509: Add simple ASN.1 grammar compiler
...
Pull CIFS fixes from Steve French.
* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
cifs: reinstate the forcegid option
Convert properly UTF-8 to UTF-16
[CIFS] WARN_ON_ONCE if kernel_sendmsg() returns -ENOSPC
Move actual pte filling for non-linear file mappings into the new special
vma operation: ->remap_pages().
Filesystems must implement this method to get non-linear mapping support,
if it uses filemap_fault() then generic_file_remap_pages() can be used.
Now device drivers can implement this method and obtain nonlinear vma support.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com> #arch/tile
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Give the key type the opportunity to preparse the payload prior to the
instantiation and update routines being called. This is done with the
provision of two new key type operations:
int (*preparse)(struct key_preparsed_payload *prep);
void (*free_preparse)(struct key_preparsed_payload *prep);
If the first operation is present, then it is called before key creation (in
the add/update case) or before the key semaphore is taken (in the update and
instantiate cases). The second operation is called to clean up if the first
was called.
preparse() is given the opportunity to fill in the following structure:
struct key_preparsed_payload {
char *description;
void *type_data[2];
void *payload;
const void *data;
size_t datalen;
size_t quotalen;
};
Before the preparser is called, the first three fields will have been cleared,
the payload pointer and size will be stored in data and datalen and the default
quota size from the key_type struct will be stored into quotalen.
The preparser may parse the payload in any way it likes and may store data in
the type_data[] and payload fields for use by the instantiate() and update()
ops.
The preparser may also propose a description for the key by attaching it as a
string to the description field. This can be used by passing a NULL or ""
description to the add_key() system call or the key_create_or_update()
function. This cannot work with request_key() as that required the description
to tell the upcall about the key to be created.
This, for example permits keys that store PGP public keys to generate their own
name from the user ID and public key fingerprint in the key.
The instantiate() and update() operations are then modified to look like this:
int (*instantiate)(struct key *key, struct key_preparsed_payload *prep);
int (*update)(struct key *key, struct key_preparsed_payload *prep);
and the new payload data is passed in *prep, whether or not it was preparsed.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Apparently this was lost when we converted to the standard option
parser in 8830d7e07a
Cc: Sachin Prabhu <sprabhu@redhat.com>
Cc: stable@vger.kernel.org # v3.4+
Reported-by: Gregory Lee Bartholomew <gregory.lee.bartholomew@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
wchar_t is currently 16bit so converting a utf8 encoded characters not
in plane 0 (>= 0x10000) to wchar_t (that is calling char2uni) lead to a
-EINVAL return. This patch detect utf8 in cifs_strtoUTF16 and add special
code calling utf8s_to_utf16s.
Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
kernel_sendmsg() is less likely to return -ENOSPC and it might be
a bug to do so. However, in the past there might have been cases
where a -ENOSPC was returned from a low level driver.
Add a WARN_ON_ONCE() to ensure that it is safe to assume that -ENOSPC
is no longer returned. This -ENOSPC specific handling will be removed
once we are sure it is no longer returned.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Pull vfs update from Al Viro:
- big one - consolidation of descriptor-related logics; almost all of
that is moved to fs/file.c
(BTW, I'm seriously tempted to rename the result to fd.c. As it is,
we have a situation when file_table.c is about handling of struct
file and file.c is about handling of descriptor tables; the reasons
are historical - file_table.c used to be about a static array of
struct file we used to have way back).
A lot of stray ends got cleaned up and converted to saner primitives,
disgusting mess in android/binder.c is still disgusting, but at least
doesn't poke so much in descriptor table guts anymore. A bunch of
relatively minor races got fixed in process, plus an ext4 struct file
leak.
- related thing - fget_light() partially unuglified; see fdget() in
there (and yes, it generates the code as good as we used to have).
- also related - bits of Cyrill's procfs stuff that got entangled into
that work; _not_ all of it, just the initial move to fs/proc/fd.c and
switch of fdinfo to seq_file.
- Alex's fs/coredump.c spiltoff - the same story, had been easier to
take that commit than mess with conflicts. The rest is a separate
pile, this was just a mechanical code movement.
- a few misc patches all over the place. Not all for this cycle,
there'll be more (and quite a few currently sit in akpm's tree)."
Fix up trivial conflicts in the android binder driver, and some fairly
simple conflicts due to two different changes to the sock_alloc_file()
interface ("take descriptor handling from sock_alloc_file() to callers"
vs "net: Providing protocol type via system.sockprotoname xattr of
/proc/PID/fd entries" adding a dentry name to the socket)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (72 commits)
MAX_LFS_FILESIZE should be a loff_t
compat: fs: Generic compat_sys_sendfile implementation
fs: push rcu_barrier() from deactivate_locked_super() to filesystems
btrfs: reada_extent doesn't need kref for refcount
coredump: move core dump functionality into its own file
coredump: prevent double-free on an error path in core dumper
usb/gadget: fix misannotations
fcntl: fix misannotations
ceph: don't abuse d_delete() on failure exits
hypfs: ->d_parent is never NULL or negative
vfs: delete surplus inode NULL check
switch simple cases of fget_light to fdget
new helpers: fdget()/fdput()
switch o2hb_region_dev_write() to fget_light()
proc_map_files_readdir(): don't bother with grabbing files
make get_file() return its argument
vhost_set_vring(): turn pollstart/pollstop into bool
switch prctl_set_mm_exe_file() to fget_light()
switch xfs_find_handle() to fget_light()
switch xfs_swapext() to fget_light()
...
There's no reason to call rcu_barrier() on every
deactivate_locked_super(). We only need to make sure that all delayed rcu
free inodes are flushed before we destroy related cache.
Removing rcu_barrier() from deactivate_locked_super() affects some fast
paths. E.g. on my machine exit_group() of a last process in IPC
namespace takes 0.07538s. rcu_barrier() takes 0.05188s of that time.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use keyring_alloc() to create special keyrings now that it has a permissions
parameter rather than using key_alloc() + key_instantiate_and_link().
Also document and export keyring_alloc() so that modules can use it too.
Signed-off-by: David Howells <dhowells@redhat.com>
make menuconfig for cifs shows multiple entries toward
the end of the list with the incorrect indentation
(probably a bug in Kconfig parsing of items
that are dependant on the module (cifs=m instead of
just CONFIG_CIFS). This patch fixes the indentation
of all but the last entry (CIFS_ACL) which I don't
know how to fix. It also clarifies wording in
two places
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Based on whether the user (on mount command) chooses:
vers=3.0 (for smb3.0 support)
vers=2.1 (for smb2.1 support)
or (with subsequent patch, which will allow SMB2 support)
vers=2.0 (for original smb2.02 dialect support)
send only one dialect at a time during negotiate (we
had been sending a list).
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Rebased and resending the patch.
Path based queries can fail for lack of access, especially during lookup
during open.
open itself would actually succeed becasue of back up intent bit
but queries (either path or file handle based) do not have a means to
specifiy backup intent bit.
So query the file info during lookup using
trans2 / findfirst / file_id_full_dir_info
to obtain file info as well as file_id/inode value.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
and remove redundant (rsp == NULL) checks after SendReceive2.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
ERRnoresource is an ERRSRV level (aka server-side) error and means "No
resources currently available for request". Currently that maps to POSIX
-ENOBUFS. No NT errors map to it currently.
NT_STATUS_INSUFFICIENT_RESOURCES and NT_STATUS_INSUFF_SERVER_RESOURCES
are also similar in meaning. Currently the client maps those to
ERRnomem, which maps to -ENOMEM in POSIX.
All of these mappings seem to be quite wrong to me and are confusing for
users. All of the above errors indicate problems on the server, not the
client. Reporting -ENOMEM or -ENOBUFS implies that the client is running
out of resources.
This patch changes those mappings. The NT_* errors are changed to map to
the SRV level ERRnoresource. That error is in turn changed to return
-EREMOTEIO which is the only POSIX error I could find that conveys that
something went wrong on the server. While we're at it, change the SMB2
equivalent error to return the same.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
...and make the default cache=strict as promised for 3.7.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
and add missed increments of failed async read and write requests.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
by making it __le64 rather than __u64 in FILE_AL_INFO structure.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Some trivial endian fixes for the SMB2 code. One
warning remains which I asked Pavel to look at.
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Now that the merge of the remaining pieces needed for
SMB2 (SMB2.1 dialect) are in, and most test cases pass,
we can consider SMB2.1 EXPERIMENTAL rather than "BROKEN."
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
With SMB2 support, update from version 1.79 to 2.0 to make
it easier for users to recognize which version has SMB2 support.
Signed-off-by: Steve French <sfrench@us.ibm.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
FL_CLOSE is quite common when you close a file on which you hold a
lock. The spurious "Unknown lock flags" message in cFYI is
confusing in this case.
Reported-by: Alexander Bokovoy <abokovoy@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The string for "unc=" in /proc/mounts needs to be escaped. The current
behaviour can create problems in cases when mounting a share starting
with a number.
example:
>mount -t cifs -o username=test,password=x vm140-31:/17000-test /mnt
>mount -o remount,password=x /mnt
mount error: could not resolve address for vm140-31x00-test: Unknown
error
The sub-string "\170" which is part of the unc for the mount above in
/proc/mounts is interpreted as character'x' in the case above. Escaping
the string fixes the problem.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Rename inode pointers for better clarity. Move the d_instantiate call to
the end of the function to prevent other tasks from seeing it before
we've finished constructing it. Since we should have exclusive access to
the inode at this point, remove the spinlock around i_nlink update.
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Now we walk though cifsFileInfo's list for every incoming lease
break and look for an equivalent there. That approach misses lease
breaks that come just after an open response - we don't have time
to populate new cifsFileInfo structure to the list. Fix this by
adding new list of pending opens and look for a lease there if we
didn't find it in the list of cifsFileInfo structures.
Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
When we have a file opened with read oplock and we are writing a data
to this file, we need to store the data in the cache and then send to
the server to ensure that the next read operation will get a coherent
data.
Also mark it as CONFIG_CIFS_SMB2 because it's more suitable for SMB2
code but can fix some CIFS problems too (when server delays sending
an oplock break after a write request). We can drop this ifdefs
dependence in future.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Currently CIFS code accept read/write ops on mandatory locked area
when two processes use the same file descriptor - it's wrong.
Fix this by serializing io and brlock operations on the inode.
Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
and allow several processes to walk through the lock list and read
can_cache_brlcks value if they are not going to modify them.
Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Now we need to lock/unlock a spinlock while processing brlock ops
on the inode. Move brlocks of a fid to a separate list and attach
all such lists to the inode. This let us not hold a spinlock.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Now that we aren't abusing the kmap address space, there's no need for
this lock or to impose a limit on the rsize.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Replace the "marshal_iov" function with a "read_into_pages" function.
That function will copy the read data off the socket and into the
pages array, kmapping and reading pages one at a time.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
We'll need an array to put into a smb_rqst, so convert this into an array
instead of (ab)using the lru list_head.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Eventually, we're going to want to append a list of pages to
cifs_readdata instead of a list of kvecs. To prepare for that, turn
the kvec array allocation into a separate one and just keep a
pointer to it in the readdata.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Now that we're using TCP_CORK on the socket, there's no value in
continuting to support this option. Schedule it for removal in 3.9.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Now that we're not kmapping so much at once, there's no need to cap
the wsize at the amount that can be simultaneously kmapped.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
For now, none of the callers populate rq_pages. That will be done for
writes in a later patch. While we're at it, change the prototype of
setup_async_request not to need a return pointer argument. Just
return the pointer to the mid_q_entry or an ERR_PTR.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Use the smb_send_rqst helper function to kmap each page in the array
and update the hash for that chunk.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Add code that allows smb_send_rqst to send an array of pages after the
initial kvec array has been sent. For now, we simply kmap the page
array and send it using the standard smb_send_kvec function. Eventually,
we may want to convert this code to use kernel_sendpage under the hood
and avoid the kmap altogether for the page data.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
We want to send SMBs as "atomically" as possible. Prior to sending any
data on the socket, cork it to make sure that no non-full frames go
out. Afterward, uncork it to make sure all of the data gets pushed out
to the wire.
Note that this more or less renders the socket=TCP_NODELAY mount option
obsolete. When TCP_CORK and TCP_NODELAY are used on the same socket,
TCP_NODELAY is essentially ignored.
Acked-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Again, just a change in the arguments and some function renaming here.
In later patches, we'll change this code to deal with page arrays.
In this patch, we add a new smb_send_rqst wrapper and have smb_sendv
call that. Then we move most of the existing smb_sendv code into a new
function -- smb_send_kvec. This seems a little redundant, but later
we'll flesh this out to deal with arrays of pages.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
We need a way to represent a call to be sent on the wire that does not
require having all of the page data kmapped. Behold the smb_rqst struct.
This new struct represents an array of kvecs immediately followed by an
array of pages.
Convert the signing routines to use these structs under the hood and
turn the existing functions for this into wrappers around that. For now,
we're just changing these functions to take different args. Later, we'll
teach them how to deal with arrays of pages.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Use hmac-sha256 and rather than hmac-md5 that is used for CIFS/SMB.
Signature field in SMB2 header is 16 bytes instead of 8 bytes.
Automatically enable signing by client when requested by the server
when signing ability is available to the client.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Eric W. Biederman