Commit Graph

35 Commits

Author SHA1 Message Date
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Markus Elfring d37b1d9943 ceph: adjust 36 checks for NULL pointers
The script “checkpatch.pl” pointed information out like the following.

Comparison to NULL could be written ...

Thus fix the affected source code places.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-09-06 19:56:52 +02:00
Linus Torvalds 26c5eaa132 The two main items are support for disabling automatic rbd exclusive
lock transfers from myself and the long awaited -ENOSPC handling series
 from Jeff.  The former will allow rbd users to take advantage of
 exclusive lock's built-in blacklist/break-lock functionality while
 staying in control of who owns the lock.  With the latter in place, we
 will abort filesystem writes on -ENOSPC instead of having them block
 indefinitely.
 
 Beyond that we've got the usual pile of filesystem fixes from Zheng,
 some refcount_t conversion patches from Elena and a patch for an
 ancient open() flags handling bug from Alexander.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJZEt/kAAoJEEp/3jgCEfOLpzAIAIld0N06DuHKG2F9mHEnLeGl
 Y60BZ3Ajo32i9qPT/u9ntI99ZMlkuHcNWg6WpCCh8umbwk2eiAKRP/KcfGcWmmp9
 EHj9COCmBR9TRM1pNS1lSMzljDnxf9sQmbIO9cwMQBUya5g19O0OpApzxF1YQhCR
 V9B/FYV5IXELC3b/NH45oeDAD9oy/WgwbhQ2feTBQJmzIVJx+Je9hdhR1PH1rI06
 ysyg3VujnUi/hoDhvPTBznNOxnHx/HQEecHH8b01MkbaCgxPH88jsUK/h7PYF3Gh
 DE/sCN69HXeu1D/al3zKoZdahsJ5GWkj9Q+vvBoQJm+ZPsndC+qpgSj761n9v38=
 =vamy
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-4.12-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "The two main items are support for disabling automatic rbd exclusive
  lock transfers from myself and the long awaited -ENOSPC handling
  series from Jeff.

  The former will allow rbd users to take advantage of exclusive lock's
  built-in blacklist/break-lock functionality while staying in control
  of who owns the lock. With the latter in place, we will abort
  filesystem writes on -ENOSPC instead of having them block
  indefinitely.

  Beyond that we've got the usual pile of filesystem fixes from Zheng,
  some refcount_t conversion patches from Elena and a patch for an
  ancient open() flags handling bug from Alexander"

* tag 'ceph-for-4.12-rc1' of git://github.com/ceph/ceph-client: (31 commits)
  ceph: fix memory leak in __ceph_setxattr()
  ceph: fix file open flags on ppc64
  ceph: choose readdir frag based on previous readdir reply
  rbd: exclusive map option
  rbd: return ResponseMessage result from rbd_handle_request_lock()
  rbd: kill rbd_is_lock_supported()
  rbd: support updating the lock cookie without releasing the lock
  rbd: store lock cookie
  rbd: ignore unlock errors
  rbd: fix error handling around rbd_init_disk()
  rbd: move rbd_unregister_watch() call into rbd_dev_image_release()
  rbd: move rbd_dev_destroy() call out of rbd_dev_image_release()
  ceph: when seeing write errors on an inode, switch to sync writes
  Revert "ceph: SetPageError() for writeback pages if writepages fails"
  ceph: handle epoch barriers in cap messages
  libceph: add an epoch_barrier field to struct ceph_osd_client
  libceph: abort already submitted but abortable requests when map or pool goes full
  libceph: allow requests to return immediately on full conditions if caller wishes
  libceph: remove req->r_replay_version
  ceph: make seeky readdir more efficient
  ...
2017-05-10 08:42:33 -07:00
Yan, Zheng 76201b6354 ceph: allow connecting to mds whose rank >= mdsmap::m_max_mds
mdsmap::m_max_mds is the expected count of active mds. It's not the
max rank of active mds. User can decrease mdsmap::m_max_mds, but does
not stop mds whose rank >= mdsmap::m_max_mds.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-05-04 09:19:20 +02:00
Jan Kara 09dc9fc24b ceph: Convert to separately allocated bdi
Allocate struct backing_dev_info separately instead of embedding it
inside client structure. This unifies handling of bdi among users.

CC: Ilya Dryomov <idryomov@gmail.com>
CC: "Yan, Zheng" <zyan@redhat.com>
CC: Sage Weil <sage@redhat.com>
CC: ceph-devel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20 12:09:55 -06:00
Jeff Layton bc2de10dc4 ceph: convert bools in ceph_mds_request to a new r_req_flags field
Currently, we have a bunch of bool flags in struct ceph_mds_request. We
need more flags though, but each bool takes (at least) a byte. Those
add up over time.

Merge all of the existing bools in this struct into a single unsigned
long, and use the set/test/clear_bit macros to manipulate them. These
are atomic operations, but that is required here to prevent
load/modify/store races. The existing flags are protected by different
locks, so we can't rely on them for that purpose.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-20 12:16:08 +01:00
Yan, Zheng aeda081c5e ceph: don't show symlink target in debugfs/mdsc
symlink target is useless for debug and can be very long. It's annoying
to show it in debugfs/mdsc.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-05-26 01:15:32 +02:00
David Howells 2b0143b5c9 VFS: normal filesystems (and lustre): d_inode() annotations
that's the bulk of filesystem drivers dealing with inodes of their own

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15 15:06:57 -04:00
Al Viro a455589f18 assorted conversions to %p[dD]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-19 13:01:20 -05:00
John Spray 14ed97033d ceph: additional debugfs output
MDS session state and client global ID is
useful instrumentation when testing.

Signed-off-by: John Spray <john.spray@redhat.com>
2014-10-14 12:57:01 -07:00
Fabian Frederick 3364d113c8 fs/ceph/debugfs.c: replace seq_printf by seq_puts
Replace seq_printf where possible.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Sage Weil <sage@inktank.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:06 -07:00
Yan, Zheng c137a32a40 ceph: print inode number for LOOKUPINO request
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-04-03 10:33:54 +08:00
Sage Weil 844d87c332 ceph: do not assume r_old_dentry[_dir] always set together
Do not assume that r_old_dentry implies that r_old_dentry_dir is also
true.  Separate out the ref cleanup and make the debugs dump behave when
it is NULL.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-03 10:33:53 +08:00
Sage Weil d1c338a509 libceph: delay debugfs initialization until we learn global_id
The debugfs directory includes the cluster fsid and our unique global_id.
We need to delay the initialization of the debug entry until we have
learned both the fsid and our global_id from the monitor or else the
second client can't create its debugfs entry and will fail (and multiple
client instances aren't properly reflected in debugfs).

Reported by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-08-20 10:03:15 -07:00
Sage Weil 41b02e1f9b ceph: explicitly reference rename old_dentry parent dir in request
We carry a pin on the parent directory for the rename source and dest
dentries.  For the source it's r_locked_dir; we need to explicitly
reference the old_dentry parent as well, since the dentry's d_parent may
change between when the request was created and pinned and when it is
freed.

Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 11:31:14 -07:00
Sage Weil 21f3b5f1bb ceph: remove debugfs debug cruft
Whoops!

Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-21 12:24:20 -07:00
Sage Weil 4af25fdda6 ceph: drop redundant r_mds field
The r_mds field is redundant, since we can find the same information at
r_session->s_mds, and when r_session is NULL then r_mds is meaningless.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-12 15:15:13 -08:00
Randy Dunlap 6f453ed6c0 ceph: fix debugfs warnings
Include "super.h" outside of CONFIG_DEBUG_FS to eliminate a compiler warning:

fs/ceph/debugfs.c:266: warning: 'struct ceph_fs_client' declared inside parameter list
fs/ceph/debugfs.c:266: warning: its scope is only this definition or declaration, which is probably not what you want
fs/ceph/debugfs.c:271: warning: 'struct ceph_fs_client' declared inside parameter list

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2010-10-20 15:38:21 -07:00
Yehuda Sadeh 3d14c5d2b6 ceph: factor out libceph from Ceph file system
This factors out protocol and low-level storage parts of ceph into a
separate libceph module living in net/ceph and include/linux/ceph.  This
is mostly a matter of moving files around.  However, a few key pieces
of the interface change as well:

 - ceph_client becomes ceph_fs_client and ceph_client, where the latter
   captures the mon and osd clients, and the fs_client gets the mds client
   and file system specific pieces.
 - Mount option parsing and debugfs setup is correspondingly broken into
   two pieces.
 - The mon client gets a generic handler callback for otherwise unknown
   messages (mds map, in this case).
 - The basic supported/required feature bits can be expanded (and are by
   ceph_fs_client).

No functional change, aside from some subtle error handling cases that got
cleaned up in the refactoring process.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:37:28 -07:00
Dan Carpenter f44c3890d9 ceph: ceph_mdsc_build_path() returns an ERR_PTR
ceph_mdsc_build_path() returns an ERR_PTR but this code is set up to
handle NULL returns.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-26 09:24:28 -07:00
Sage Weil 213c99ee0c ceph: whitespace cleanup
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-03 10:25:11 -07:00
Sage Weil a8b763a9b3 ceph: use %pU to print uuid (fsid)
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-01 20:11:42 -07:00
Yehuda Sadeh bfaf148eb2 ceph: fix caps debugfs entry
The ceph client structure was not set correctly.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-24 09:47:36 -07:00
Yehuda Sadeh f8c76f6f25 ceph: make mon client statfs handling more generic
This is being done so that we could reuse the statfs
infrastructure with other requests that return values.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-17 15:25:33 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from  to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Sage Weil 4fc51be8fa ceph: use rbtree for pg pools; decode new osdmap format
Since we can now create and destroy pg pools, the pool ids will be sparse,
and an array no longer makes sense for looking up by pool id.  Use an
rbtree instead.

The OSDMap encoding also no longer has a max pool count (previously used to
allocate the array).  There is a new pool_max, that is the largest pool id
we've ever used, although we don't actually need it in the client.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 10:02:49 -08:00
Sage Weil 85ccce43a3 ceph: clean up readdir caps reservation
Use a global counter for the minimum number of allocated caps instead of
hard coding a check against readdir_max.  This takes into account multiple
client instances, and avoids examining the superblock mount options when a
cap is dropped.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 10:02:43 -08:00
Sage Weil 85ff03f6bf ceph: use rbtree for mon statfs requests
An rbtree is lighter weight, particularly given we will generally have
very few in-flight statfs requests.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 22:01:10 -08:00
Sage Weil 44ca18f268 ceph: use rbtree for mds requests
The rbtree is a more appropriate data structure than a radix_tree.  It
avoids extra memory usage and simplifies the code.

It also fixes a bug where the debugfs 'mdsc' file wasn't including the
most recent mds request.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 22:01:08 -08:00
Sage Weil 7740a42f81 ceph: display pgid in debugfs osd request dump
Signed-off-by: Sage Weil <sage@newdream.net>
2010-01-14 12:23:39 -08:00
Yehuda Sadeh 2baba25019 ceph: writeback congestion control
Set bdi congestion bit when amount of write data in flight exceeds adjustable
threshold.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-21 16:39:56 -08:00
Sage Weil 06edf046dd ceph: include link to bdi in debugfs
Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-21 16:39:54 -08:00
Sage Weil 0743304d87 ceph: fix debugfs entry, simplify fsid checks
We may first learn our fsid from any of the mon, osd, or mds maps
(whichever the monitor sends first).  Consolidate checks in a single
helper.  Initialize the client debugfs entry then, since we need the
fsid (and global_id) for the directory name.

Also remove dead mount code.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-20 14:24:27 -08:00
Sage Weil 039934b895 ceph: build cleanly without CONFIG_DEBUG_FS
Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-12 15:56:51 -08:00
Sage Weil 76aa844d5b ceph: debugfs
Basic state information is available via /sys/kernel/debug/ceph,
including instances of the client, fsids, current monitor, mds and osd
maps, outstanding server requests, and hooks to adjust debug levels.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:14 -07:00