Commit Graph

26 Commits

Author SHA1 Message Date
Linus Torvalds eab4002660 RISC-V Patches for the 5.7 Merge Window, Part 1
This tag contains the patches I'd like to target for 5.7.  It has a handful of
 new features:
 
 * Partial support for the Kendryte K210.  There are still a few outstanding
   issues that I have patches for, but I don't actually have a board to test
   them so they're not included yet.
 * SBI v0.2 support.
 * Fixes to support for building with LLVM-based toolchains.  The resulting
   images are known not to boot yet.
 
 This builds and boots for me.  There is one merge conflict, it's just a Kconfig
 merge issue.  I can publish a resolved branch if you'd like.
 
 I don't anticipate a part two, but I'll probably have something early in the
 RCs to finish up the K210 support.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAl6OAAoTHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRAuExnzX7sYiUqKEACidkNwwFf10hN6ojnIsBeh0mvZ0QuD
 qw5Uj0L5rmKdf84IRUGH8A3tyal39BoNz41Eo0mvZoInj542fVMArrqpAIKHN6e+
 GMOoHgeZO329zQYMqBX1RN/W9MV80KPKZcROeWkL+AbAmbQBaVRq08Ur1QIg2bHI
 84H0LzlCd1xz9k827ypOyz7ix4OYkli7DcUgdiPTK95CjaseALQXvSYA237lcXpB
 3g2L+/TDrjtGHn+vy3XWLJISY/BY4ZKfWN0UL4CJHvGuL61tJ+VRXaA3DQcBNd56
 7du41GTz9BU6J5wZTVnB5HstebwiXyP8pY34Pp8S4/wWyVdoi5hZ0Jn7sC9oDdnA
 r/CjawrGCZv6IEt69YA1edo3AoR13gXCbylRovdxVMRYa0OLmcTfFr843svTZzbQ
 ECSt6te2J2YwtYeLO6AlZeu2gBLW0Mxh5JBmiB8sy9C8tVlD/EFTYrnhEQnjUEVx
 wV76wfbeYL1be5IS4Tu/d0F5My6miIL+JafUND0bJQ7igp08po/YY4NIg/xyYlM2
 Aqie3MuTYlA3/I20N1K2mQkQnjKS4Y5AqNDj5povew2mPUvTGuLhZDZ/asKxdBIf
 BSq3V74V/Vc+qsh1d5IhUCDVthGYqBoJoBSUjcbItrpgmhLyvhbbSCLeF8ehDPeI
 Y9074bg5YH79pg==
 =P1DO
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:
 "This contains a handful of new features:

   - Partial support for the Kendryte K210.

     There are still a few outstanding issues that I have patches for,
     but I don't actually have a board to test them so they're not
     included yet.

   - SBI v0.2 support.

   - Fixes to support for building with LLVM-based toolchains. The
     resulting images are known not to boot yet.

  I don't anticipate a part two, but I'll probably have something early
  in the RCs to finish up the K210 support"

* tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits)
  riscv: create a loader.bin boot image for Kendryte SoC
  riscv: Kendryte K210 default config
  riscv: Add Kendryte K210 device tree
  riscv: Select required drivers for Kendryte SOC
  riscv: Add Kendryte K210 SoC support
  riscv: Add SOC early init support
  riscv: Unaligned load/store handling for M_MODE
  RISC-V: Support cpu hotplug
  RISC-V: Add supported for ordered booting method using HSM
  RISC-V: Add SBI HSM extension definitions
  RISC-V: Export SBI error to linux error mapping function
  RISC-V: Add cpu_ops and modify default booting method
  RISC-V: Move relocate and few other functions out of __init
  RISC-V: Implement new SBI v0.2 extensions
  RISC-V: Introduce a new config for SBI v0.1
  RISC-V: Add SBI v0.2 extension definitions
  RISC-V: Add basic support for SBI v0.2
  RISC-V: Mark existing SBI as 0.1 SBI.
  riscv: Use macro definition instead of magic number
  riscv: Add support to dump the kernel page tables
  ...
2020-04-09 10:51:30 -07:00
Anup Patel bd6f20333c
RISC-V: Only select essential drivers for SOC_VIRT config
The kconfig select causes build failues for SOC_VIRT config becaus
we are selecting lot of VIRTIO drivers without selecting all required
dependencies.

Better approach is to only select essential drivers from SOC_VIRT
config option and enable required VIRTIO drivers using defconfigs.

Fixes: 759bdc1681 ("RISC-V: Add kconfig option for QEMU virt machine")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26 12:35:04 -07:00
Anup Patel d2047aba2e
RISC-V: Select Goldfish RTC driver for QEMU virt machine
We select Goldfish RTC driver using QEMU virt machine kconfig option
to access RTC device on QEMU virt machine.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05 10:48:46 -08:00
Anup Patel 81e2d3c52c
RISC-V: Select SYSCON Reboot and Poweroff for QEMU virt machine
The SYSCON Reboot and Poweroff drivers can be used on QEMU virt machine
to reboot or poweroff the system hence we select these drivers using
QEMU virt machine kconfig option.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05 10:48:45 -08:00
Anup Patel a4485398b6
RISC-V: Enable QEMU virt machine support in defconfigs
We have kconfig option for QEMU virt machine so let's enable it
in RV32 and RV64 defconfigs. Also, we remove various VIRTIO configs
from RV32 and RV64 defconfigs because these are now selected by
QEMU virt machine kconfig option.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05 10:48:44 -08:00
Deepa Dinamani 2fab7a1560
riscv: Delete CONFIG_SYSFS_SYSCALL from defconfigs
According to init/Kconfig:
"sys_sysfs is an obsolete system call no longer supported in libc.
Note that disabling this option is more secure but might break
compatibility with some systems."

This syscall is not required for new architectures. Since the config
defaults to 'y'. Set this to 'n' exlicitly.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-03 10:28:11 -08:00
Paul Walmsley 2e06b27175 riscv: defconfigs: enable more debugging options
Enable more debugging options in the RISC-V defconfigs to help kernel
developers catch problems with patches earlier in the development
cycle.

Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
2019-11-22 18:50:58 -08:00
Paul Walmsley f2c5fd9e4c riscv: defconfigs: enable debugfs
debugfs is broadly useful, so enable it in the RISC-V defconfigs.

Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
2019-11-22 11:02:30 -08:00
Anup Patel 1cec0ce2e9 RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig
This patch enables more VIRTIO drivers (such as console, rpmsg, 9p,
rng, etc.) which are usable on KVM RISC-V Guest and Xvisor RISC-V
Guest.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-19 05:44:35 -07:00
Alistair Francis d568cb3f93 riscv: defconfig: Update the defconfig
Update the defconfig:
 - Add CONFIG_HW_RANDOM=y and CONFIG_HW_RANDOM_VIRTIO=y to enable
   VirtIORNG when running on QEMU

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-08-13 19:26:42 -07:00
Paul Walmsley b7edabfe84 riscv: defconfig: align RV64 defconfig to the output of "make savedefconfig"
Align the RV64 defconfig to the output of "make savedefconfig" to
avoid unnecessary deltas for future defconfig patches.  This patch
should have no runtime functional impact.

Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-31 12:26:10 -07:00
Loys Ollivier bbc5dc5155 riscv: defconfig: enable SOC_SIFIVE
Enable SOC_SIFIVE so the default upstream config is bootable on the SiFive
Unleashed Board.
And have basic support for future boards based on the same SoC.

Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
[paul.walmsley@sifive.com: updated to apply]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-07-01 13:20:05 -07:00
Anup Patel 6dd91e0eac RISC-V: defconfig: Enable NO_HZ_IDLE and HIGH_RES_TIMERS
This patch enables NO_HZ_IDLE (idle dynamic ticks) and HIGH_RES_TIMERS
(hrtimers) in RV32 and RV64 defconfigs.

Both of the above options are enabled by default for architectures
such as x86, ARM, and ARM64.

The idle dynamic ticks helps use save power by stopping timer ticks
when the system is idle whereas hrtimers is a much improved timer
subsystem compared to the old "timer wheel" based system.

This patch is tested on SiFive Unleashed board and QEMU Virt machine.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-07-01 13:04:54 -07:00
Atish Patra ff8391e1b7 RISC-V: defconfig: enable MMC & SPI for RISC-V
Currently, riscv upstream defconfig doesn't let you boot
through userspace if rootfs is on the SD card.

Let's enable MMC & SPI drivers as well so that one can boot
to the user space using default config in upstream kernel.

While here, enable automatic mounting of devtmpfs to simplify
kernel testing with minimal root filesystems. (pjw)

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
[paul.walmsley@sifive.com: mention the DEVTMPFS_MOUNT change in the
 patch description]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-26 10:27:49 -07:00
Kevin Hilman 3b025f2bc9 RISC-V: defconfig: enable clocks, serial console
Enable PRCI clock driver and serial console by default, so the default
upstream defconfig is bootable to a serial console.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-11 08:00:20 -07:00
Palmer Dabbelt 2a200fb9fb
RISC-V: defconfig: Add CRYPTO_DEV_VIRTIO=y
This allows acceleration of cryptography inside QEMU.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-23 14:09:01 -08:00
Alistair Francis e4cf9e47ab
RISC-V: defconfig: Enable Generic PCIE by default
Enable generic PCIe by default in the RISC-V defconfig, this allows us
to use QEMU's PCIe support out of the box.  CONFIG_RAS=y is
automatically selected by generic PCIe, so it has been dropped from
the defconfig.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
[Palmer: Split out PCIE_XILINX and CRYPTO_DEV_VIRTIO]
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-23 14:07:46 -08:00
Palmer Dabbelt a37ead8f2e
RISC-V: defconfig: Move CONFIG_PCI{,E_XILINX}
eb01d42a77 ("PCI: consolidate PCI config entry in drivers/pci")
reorganized the PCI-related Kconfig entries and resulted in a diff in
our defconfig.  This simply removes the diff.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-23 12:59:17 -08:00
Anup Patel 2b3f786408
RISC-V: defconfig: Enable RISC-V SBI earlycon support
This patch enables RISC-V SBI earlycon support in default defconfig
so that we can use "earlycon=sbi" in kernel parameters for early
debug prints.

Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-17 10:23:46 -08:00
Anup Patel 4ab49461d9
RISC-V: defconfig: Enable printk timestamps
The printk timestamps are very useful information to visually see
where kernel is spending time during boot. It also helps us see
the timing of hotplug events at runtime.

This patch enables printk timestamps in RISC-V defconfig so that
we have it enabled by default (similar to other architectures
such as x86_64, arm64, etc).

Signed-off-by: Anup Patel <anup@brainfault.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-12 17:16:10 -08:00
Anup Patel ba1f0d9557
RISC-V: refresh defconfig
This patch updates defconfig using savedefconfig on Linux-4.19.  It is
intended to have no functional change.

Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-01 17:04:07 -07:00
Christoph Hellwig 8237f8bc4f
irqchip: add a SiFive PLIC driver
Add a driver for the SiFive implementation of the RISC-V Platform Level
Interrupt Controller (PLIC).  The PLIC connects global interrupt sources
to the local interrupt controller on each hart.

This driver is based on the driver in the RISC-V tree from Palmer Dabbelt,
but has been almost entirely rewritten since, and includes many fixes
from Atish Patra.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
[Binding update by Palmer]
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-13 08:31:32 -07:00
Palmer Dabbelt 24a130ccfe
RISC-V: Add CONFIG_HVC_RISCV_SBI=y to defconfig
The SBI exists on all RISC-V systems, so there's no reason not to
compile this driver in.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-06-11 09:16:24 -07:00
Zong Li 4a632cec88
RISC-V: Enable module support in defconfig
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-02 20:00:56 -07:00
Karsten Merker 33c57c0d3c
RISC-V: Add a basic defconfig
This patch provides a basic defconfig for the RISC-V
architecture that enables enough kernel features to run a
basic Linux distribution on qemu's "virt" board for native
software development. Features include:

- serial console
- virtio block and network device support
- VFAT and ext2/3/4 filesystem support
- NFS client and NFS rootfs support
- an assortment of other kernel features required for
  running systemd

It also enables a number of drivers for physical hardware
that target the "SiFive U500" SoC and the corresponding
development platform.  These include:

- PCIe host controller support for the FPGA-based U500
  development platform (PCIE_XILINX)
- USB host controller support (OHCI/EHCI/XHCI)
- USB HID (keyboard/mouse) support
- USB mass storage support (bulk and UAS)
- SATA support (AHCI)
- ethernet drivers (MACB for a SoC-internal MAC block, microsemi
  ethernet phy, E1000E and R8169 for PCIe-connected external devices)
- DRM and framebuffer console support for PCIe-connected
  Radeon graphics chips

Signed-off-by: Karsten Merker <merker@debian.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-07 15:14:36 -08:00
Palmer Dabbelt fbe934d69e RISC-V: Build Infrastructure
This patch contains all the build infrastructure that actually enables
the RISC-V port.  This includes Makefiles, linker scripts, and Kconfig
files.  It also contains the only top-level change, which adds RISC-V to
the list of architectures that need a sed run to produce the ARCH
variable when building locally.

Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2017-09-26 15:26:49 -07:00