While the commit [d0a601c278de: ALSA: jack: Fix the id uniqueness
check] fixes the wrong string check, it leads to a worse result -- the
loop in get_available_index() goes into an endless loop. The cause is
that snd_ctl_find_id() returns the object assigned to the numid if
it's set. Thus it points to the previous entry again.
This patch clears the numid field for the next call properly.
Reported-and-tested-by: Tomáš Pružina <pruzinat@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It was a busy development cycle at this time, as you can see a wide
range of changes in diffstat. There are no big changes but many
refactoring and improvements. Here we go some highlights:
* ALSA core:
- Procfs codes were cleaned up to use seq_file
- Procfs can be opt out via Kconfig (only for EXPERT)
- Two types of jack API were unified finally; now both kctl and input
jack devs are handled via a single function call.
* HD-audio
- Continued code restructuring for the future ASoC driver; now HDA
controller driver is split to a core helper module.
- Preliminary codes for Skylake audio support in HDA core.
- Proper i915 gfx power well management for SKL & co
- Enabled runtime PM as default for Intel HDMI/DP codecs
- Newer Tegra chip supports
- More quirks for Dell headsets, Alienware (with CA0132), etc.
- A couple of DRM ELD helper API functions
* ASoC
- Support for loading ASoC topology maps from firmware, intended to be
used to allow self-describing DSP firmware images to be built which
can map controls added by the DSP to userspace without the kernel
needing to know about individual DSP firmwares
- Lots of refactoring to avoid direct access to snd_soc_codec where
it's not needed supporting future refactoring
- Big refactoring, cleanup and enhancement for the Wolfson ADSP driver
- Cleanup series for TI TAS2552 and R-CAR drivers
- Fixes and improvements on RT56xx codecs
- Support for TI TAS571x power amplifiers
- Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs
- Support for x86 systems with RT5650 and Qualcomm Storm
- Support for Mediatek AFE (Audio Front End) unit
- Other various small fixes to ASoC codec drivers
* Firewire
- Enhanced to allow non-blocking streams to use timestamp
synchronization
- Improve support for DM1500 and BeBoBv3
* Misc
- Cleanup of old pci API functions over all PCI sound drivers
- Fix long-standing regression of the old powermac i2c setup
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=D78E
-----END PGP SIGNATURE-----
Merge tag 'sound-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a busy development cycle at this time, as you can see a wide
range of changes in diffstat. There are no big changes but many
refactoring and improvements. Here we go some highlights:
ALSA core:
- Procfs codes were cleaned up to use seq_file
- Procfs can be opt out via Kconfig (only for EXPERT)
- Two types of jack API were unified finally; now both kctl and input
jack devs are handled via a single function call.
HD-audio:
- Continued code restructuring for the future ASoC driver; now HDA
controller driver is split to a core helper module.
- Preliminary codes for Skylake audio support in HDA core.
- Proper i915 gfx power well management for SKL & co
- Enabled runtime PM as default for Intel HDMI/DP codecs
- Newer Tegra chip supports
- More quirks for Dell headsets, Alienware (with CA0132), etc.
- A couple of DRM ELD helper API functions
ASoC:
- Support for loading ASoC topology maps from firmware, intended to
be used to allow self-describing DSP firmware images to be built
which can map controls added by the DSP to userspace without the
kernel needing to know about individual DSP firmwares
- Lots of refactoring to avoid direct access to snd_soc_codec where
it's not needed supporting future refactoring
- Big refactoring, cleanup and enhancement for the Wolfson ADSP
driver
- Cleanup series for TI TAS2552 and R-CAR drivers
- Fixes and improvements on RT56xx codecs
- Support for TI TAS571x power amplifiers
- Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs
- Support for x86 systems with RT5650 and Qualcomm Storm
- Support for Mediatek AFE (Audio Front End) unit
- Other various small fixes to ASoC codec drivers
Firewire:
- Enhanced to allow non-blocking streams to use timestamp
synchronization
- Improve support for DM1500 and BeBoBv3
Misc:
- Cleanup of old pci API functions over all PCI sound drivers
- Fix long-standing regression of the old powermac i2c setup"
* tag 'sound-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (533 commits)
ALSA: pcm: Fix pcm_class sysfs output
ALSA: hda-beep: Update authors dead email address
ASoC: wm_adsp: Move DSP Rate controls into the codec
ASoC: wm8995: Fix setting sysclk for WM8995_SYSCLK_MCLK2 case
ALSA: hda: provide default bus io ops extended hdac
ALSA: hda: add hda link cleanup routine
ALSA: hda: add hdac_ext stream creation and cleanup routines
ASoC: rsrc-card: remove unused ret
ALSA: HDAC: move SND_HDA_PREALLOC_SIZE to core
ASoC: mediatek: Add machine driver for rt5650 rt5676 codec
ASoC: mediatek: Add machine driver for MAX98090 codec
ASoC: mediatek: Add AFE platform driver
ASoC: rsnd: remove io from rsnd_mod
ASoC: rsnd: move rsnd_mod_is_working() to rsnd_io_is_working()
ASoC: rsnd: don't use rsnd_mod_to_io() on snd_kcontrol
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_src_xxx()
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_ssi_xxx()
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_dma_xxx()
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_get_adinr()
ASoC: rsnd: add common interrupt handler for SSI/SRC/DMA
...
The pcm_class sysfs of each PCM substream gives only "none" since the
recent code change to embed the struct device. Fix the code to point
directly to the embedded device object properly.
Fixes: ef46c7af93 ('ALSA: pcm: Embed struct device')
Cc: <stable@vger.kernel.org> # v4.0+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull timer updates from Thomas Gleixner:
"A rather largish update for everything time and timer related:
- Cache footprint optimizations for both hrtimers and timer wheel
- Lower the NOHZ impact on systems which have NOHZ or timer migration
disabled at runtime.
- Optimize run time overhead of hrtimer interrupt by making the clock
offset updates smarter
- hrtimer cleanups and removal of restrictions to tackle some
problems in sched/perf
- Some more leap second tweaks
- Another round of changes addressing the 2038 problem
- First step to change the internals of clock event devices by
introducing the necessary infrastructure
- Allow constant folding for usecs/msecs_to_jiffies()
- The usual pile of clockevent/clocksource driver updates
The hrtimer changes contain updates to sched, perf and x86 as they
depend on them plus changes all over the tree to cleanup API changes
and redundant code, which got copied all over the place. The y2038
changes touch s390 to remove the last non 2038 safe code related to
boot/persistant clock"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
clocksource: Increase dependencies of timer-stm32 to limit build wreckage
timer: Minimize nohz off overhead
timer: Reduce timer migration overhead if disabled
timer: Stats: Simplify the flags handling
timer: Replace timer base by a cpu index
timer: Use hlist for the timer wheel hash buckets
timer: Remove FIFO "guarantee"
timers: Sanitize catchup_timer_jiffies() usage
hrtimer: Allow hrtimer::function() to free the timer
seqcount: Introduce raw_write_seqcount_barrier()
seqcount: Rename write_seqcount_barrier()
hrtimer: Fix hrtimer_is_queued() hole
hrtimer: Remove HRTIMER_STATE_MIGRATE
selftest: Timers: Avoid signal deadlock in leap-a-day
timekeeping: Copy the shadow-timekeeper over the real timekeeper last
clockevents: Check state instead of mode in suspend/resume path
selftests: timers: Add leap-second timer edge testing to leap-a-day.c
ntp: Do leapsecond adjustment in adjtimex read path
time: Prevent early expiry of hrtimers[CLOCK_REALTIME] at the leap second edge
ntp: Introduce and use SECS_PER_DAY macro instead of 86400
...
snd_kctl_jack_new() tries to assign a unique index number when a name
string that has been already registered is passed. However, it checks
with the base string without "Jack" suffix, so it never hits.
Fix the call with the properly processed name string instead.
Fixes: b8dd086674 'ALSA: Jack: handle jack embedded kcontrol creating within ctljack')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are a few leftover CONFIG_PROC_FS forgotten to replace with
CONFIG_SND_PROC_FS.
Fixes: cd6a65036f ('ALSA: replace CONFIG_PROC_FS with CONFIG_SND_PROC_FS')
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We may disable proc fs only for sound part, to reduce ALSA
memory footprint. So add CONFIG_SND_PROC_FS and replace the
old CONFIG_PROC_FSs in alsa code.
With sound proc fs disabled, we can save about 9KB memory
size on X86_64 platform.
Signed-off-by: Jie Yang <yang.jie@intel.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For some embedded devices, we need reduce code size and data
footprint as much as possible, e.g. disabling procfs, hw/sw
params refinement, mmap, dpcm, dapm, compressed API...
Here add SND_PROC_FS item for expert, we can unselect it to
disable sound proc FS and reduce memory footprint.
Signed-off-by: Jie Yang <yang.jie@intel.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a helper to create the IEC958 channel status from an ALSA
snd_pcm_runtime structure, taking account of the sample rate and
sample size.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviwed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a helper for the EDID like data structure, which is typically passed
from a HDMI adapter to its associated audio driver. This informs the
audio driver of the capabilities of the attached HDMI sink.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The jack interface is statically included in sound core. Having
doubly module information is rather confusing.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently in snd_pcm_update_hw_ptr0 during interrupt,
we consider there were double acknowledged interrupts when:
1. HW reported pointer is smaller than expected, and
2. Time from last update time (hdelta) is over half a buffer time.
However, when HW reported pointer is only a few bytes smaller than
expected, and when hdelta is just a little larger than half a buffer time
(e.g. ping-pong buffer), it wrongly treats this IRQ as double acknowledged.
The condition #2 uses jiffies, but jiffies is not high resolution
since it is integer. We should consider jiffies inaccuracy.
Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit [c560a6797e3b: ALSA: core: Remove child proc file elements
recursively] converted snd_card_proc_new() with the normal
snd_info_*() call and removed snd_device chain for such info
entries. However, it misses one point: the creation of the proc entry
was managed by snd_device chain in the former code, and now it's also
gone, which results in no proc files creation at all. Mea culpa.
This patch makes snd_info_card_register() creating the all pending
child proc entries in a shot. Also, since snd_card_register() might
be called multiple times, this function is also changed to be callable
multiple times.
Along with the changes above, now the linked list of snd_info_entry is
added at creation time instead of snd_info_register() for keeping eyes
of pending info entries.
Fixes: c560a6797e ('ALSA: core: Remove child proc file elements recursively')
Reported-by: "Lu, Han" <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_info_free_entry() releases the all children nodes as well, but due
to the wrong timing of releasing the link, the children nodes may be
disconnected but left unreleased. This patch fixes it by moving the
link free at the right position. Also it eases list_for_each_entry()
without _safe option in snd_info_disconnect() because it no longer
frees the children nodes there.
Fixes: c560a6797e ('ALSA: core: Remove child proc file elements recursively')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Another fixes for NULL jack->input_dev in some places in jack.c.
Fixes: 2ba2dfa1fc ('ALSA: hda - Update to use the new jack kctls method')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is no input_dev for phantom jack, we should not report
input event for it, otherwise, NULL pointer dereference error
will occur.
Fixes: 2ba2dfa1fc ('ALSA: hda - Update to use the new jack kctls method')
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_kctl_jack_new() and snd_kctl_jack_report() are internal only now
so make them static.
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jack snd_kcontrols can now be created during snd_jack_new()
or by later calling snd_jack_add_new_kctls().
This patch creates the jacks during the initialisation stage
for both phantom and non phantom jacks.
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dont create input devices for phantom jacks.
Here, we extend snd_jack_new() to support phantom jack creating:
pass in a bool param for [non-]phantom flag, and a bool param
initial_jack to indicate whether we need to create a kctl at
this stage.
We can also add a kctl to the jack after its created meaning we
can now integrate the HDA and ASoC jacks.
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds a static method get_available_index() to
allocate the index of new jack kcontrols and also adds
jack_kctl_name_gen() which is used to ensure compatibility
with jack naming by removing " Jack" from some incorrectly
passed names.
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the ALSA jack core registers only input devices for each jack
registered. These jack input devices are not readable by userspace devices
that run as non root. This patch series will implement kctls inside the
core jack part, including kctls creating, status changing report, for both
HD-Audio and ASoC jack. This allows non root userspace to read jack status
and act on it.
This patch adds a new API called snd_jack_add_new_kctl(), which will create
a kcontrol, add it to the card, and also attach it to the jack kctl list.
This patch also initialises the jack kctl list after jack is newed, and
reports kctl status when jack insertion/removal events occur.
snd_jack_new() is updated in the following patches to also support creating
phantom jacks and jack kcontrols. We then remove these duplicated features
from HDA jack and have jack kctls handled by core throughout HDA and ASoC.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Modified-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Jie Yang <yang.jie@intel.com>
Reveiwed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few minor cleanups:
- Move the call of snd_info_minor_register() into snd_info_init() so
that we can call all proc-related stuff in a shot
- Add missing __init prefix to snd_info_minor_register()
- Return an error properly from snd_oss_info_register()
- Drop snd_info_minor_unregister() that is superfluous now
Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Minor cleanups of Makefile to build some codes conditionally so that
a few ifdefs can be reduced.
Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far we've ignored the errors at creating proc files in many places.
But they should be rather treated seriously.
Also, by assuring the error handling, we can get rid of superfluous
snd_info_free_entry() calls as they will be removed by the parent in
the caller side.
This patch fixes the missing error checks and reduces the superfluous
free calls.
Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since each proc entry is freed automatically by the parent, we don't
have to take care of its life cycle any longer. This allows us to
reduce a few more lines of codes.
Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Using snd_info_entry for /proc/asound root makes easier to release the
all children, too. Further cleanups will follow.
Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch changes the way to manage the resource release of proc
files: namely, let snd_info_free_entry() freeing the whole children.
This makes it us possible to drop the snd_device_*() management. Then
snd_card_proc_new() becomes merely a wrapper to
snd_info_create_card_entry().
Together with this change, now you need to call snd_info_free_entry()
for a proc entry created via snd_card_proc_new(), while it was freed
via snd_device_free() beforehand.
Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, snd_info_init() just returns an error without releasing the
previously assigned resources at error path. The assigned proc and
info entries have to be released properly. This patch covers it.
While we are at it, refactor the code a bit, too.
Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
seq_file is _the_ standard interface for simple text proc files.
Though, we still need to support the binary proc files and the text
file write, and also we need to manage the device disconnection
gracefully. Thus this patch just replaces the text file read code
with seq_file while keeping the rest intact.
snd_iprintf() helper function is now a macro to expand itself to
seq_printf() to be compatible with the existing code. The seq_file
object is stored to the unused entry->rbuffer->buffer pointer.
When the output size is expected to be large (greater than PAGE_SIZE),
the driver should set entry->size field beforehand. Then the given
size will be preallocated and the multiple show calls can be avoided.
Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
No point in converting a timespec now that the value is directly
accessible. Get rid of the null check while at it. Resolution is
guaranteed to be > 0.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: alsa-devel@alsa-project.org
Link: http://lkml.kernel.org/r/20150414203500.799133359@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There have been major modernization with the standard bus: in ALSA
sequencer core and HD-audio. Also, HD-audio receives the regmap
support replacing the in-house cache register cache code. These
changes shouldn't impact the existing behavior, but rather
refactoring.
In addition, HD-audio got the code split to a core library part and
the "legacy" driver parts. This is a preliminary work for adapting
the upcoming ASoC HD-audio driver, and the whole transition is still
work in progress, likely finished in 4.1.
Along with them, there are many updates in ASoC area as usual, too:
lots of cleanups, Intel code shuffling, etc.
Here are some highlights:
ALSA core:
- PCM: the audio timestamp / wallclock enhancement
- PCM: fixes in DPCM management
- Fixes / cleanups of user-space control element management
- Sequencer: modernization using the standard bus
HD-audio:
- Modernization using the standard bus
- Regmap support
- Use standard runtime PM for codec power saving
- Widget-path based power-saving for IDT, VIA and Realtek codecs
- Reorganized sysfs entries for each codec object
- More Dell headset support
ASoC:
- Move of jack registration to the card level
- Lots of ASoC cleanups, mainly moving things from the CODEC level
to the card level
- Support for DAPM routes specified by both the machine driver and DT
- Continuing improvements to rcar
- pcm512x enhacements
- Intel platforms updates
- rt5670 updates / fixes
- New platforms / devices: some non-DSP Qualcomm platforms, Google's
Storm platform, Maxmim MAX98925 CODECs and the Ingenic JZ4780 SoC
Misc:
- ice1724: Improved ESI W192M support
- emu10k1: Emu 1010 fixes/enhancement
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=4z5j
-----END PGP SIGNATURE-----
Merge tag 'sound-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There have been major modernization with the standard bus: in ALSA
sequencer core and HD-audio. Also, HD-audio receives the regmap
support replacing the in-house cache register cache code. These
changes shouldn't impact the existing behavior, but rather
refactoring.
In addition, HD-audio got the code split to a core library part and
the "legacy" driver parts. This is a preliminary work for adapting
the upcoming ASoC HD-audio driver, and the whole transition is still
work in progress, likely finished in 4.1.
Along with them, there are many updates in ASoC area as usual, too:
lots of cleanups, Intel code shuffling, etc.
Here are some highlights:
ALSA core:
- PCM: the audio timestamp / wallclock enhancement
- PCM: fixes in DPCM management
- Fixes / cleanups of user-space control element management
- Sequencer: modernization using the standard bus
HD-audio:
- Modernization using the standard bus
- Regmap support
- Use standard runtime PM for codec power saving
- Widget-path based power-saving for IDT, VIA and Realtek codecs
- Reorganized sysfs entries for each codec object
- More Dell headset support
ASoC:
- Move of jack registration to the card level
- Lots of ASoC cleanups, mainly moving things from the CODEC level to
the card level
- Support for DAPM routes specified by both the machine driver and DT
- Continuing improvements to rcar
- pcm512x enhacements
- Intel platforms updates
- rt5670 updates / fixes
- New platforms / devices: some non-DSP Qualcomm platforms, Google's
Storm platform, Maxmim MAX98925 CODECs and the Ingenic JZ4780 SoC
Misc:
- ice1724: Improved ESI W192M support
- emu10k1: Emu 1010 fixes/enhancement"
* tag 'sound-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (411 commits)
ALSA: hda - set GET bit when adding a vendor verb to the codec regmap
ALSA: hda/realtek - Enable the ALC292 dock fixup on the Thinkpad T450
ALSA: hda - Fix another race in runtime PM refcounting
ALSA: hda - Expose codec type sysfs
ALSA: ctl: fix to handle several elements added by one operation for userspace element
ASoC: Intel: fix array_size.cocci warnings
ASoC: n810: Automatically disconnect non-connected pins
ASoC: n810: Consistently pass the card DAPM context to n810_ext_control()
ASoC: davinci-evm: Use card DAPM context to access widgets
ASoC: mop500_ab8500: Use card DAPM context to access widgets
ASoC: wm1133-ev1: Use card DAPM context to access widgets
ASoC: atmel: Improve machine driver compile test coverage
ASoC: atmel: Add dependency to SND_SOC_I2C_AND_SPI where necessary
ALSA: control: Fix a typo of SNDRV_CTL_ELEM_ACCESS_TLV_* with SNDRV_CTL_TLV_OP_*
ALSA: usb-audio: Don't attempt to get Microsoft Lifecam Cinema sample rate
ASoC: rnsd: fix build regression without CONFIG_OF
ALSA: emu10k1: add toggles for E-mu 1010 optical ports
ALSA: ctl: fill identical information to return value when adding userspace elements
ALSA: ctl: fix a bug to return no identical information in info operation for userspace controls
ALSA: ctl: confirm to return all identical information in 'activate' event
...
An element instance can have several elements with the same feature.
Some userspace applications can add such an element instance by add
operation with the number of elements. Then, the element instance
gets a memory object to keep states of these elements.
But the element instance has just one memory object for the elements.
This causes the same result to each read/write operations to the
different elements.
This commit fixes this bug by allocating enough memory objects to the
element instance for each of elements.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit [39d118677baa: ALSA: ctl: evaluate macro instead of
numerical value] replaced the numbers with constants, but one place
was replaced wrongly with a different type. Fixed now.
Fixes: 39d118677b ('ALSA: ctl: evaluate macro instead of numerical value')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
readv() and writev() should _not_ ignore all but the first ->iov_len,
among other things. Really weird abuse of those syscalls - it
expects a vector element per channel, with identical lengths (it
actually assumes them to be identical - no checking is done).
readv() and writev() are really bad match for that. Unfortunately,
userland API is userland API and we can't do anything about them.
Converted to ->read_iter/->write_iter. Please, _please_ don't do
anything of that kind when designing new interfaces.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
currently some members related identical information are not fiiled
in returned parameter of SNDRV_CTL_IOCTL_ELEM_ADD. This is not better
for userspace application.
This commit copies information to returned value. When failing to copy
into userspace, the added elements are going to be removed. Then, no
applications can lock these elements between adding and removing because
these are already locked.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In operations of SNDRV_CTL_IOCTL_ELEM_INFO, identical information in
returned value is cleared. This is not better to userspace application.
This commit confirms to return full identical information to the
operations.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When event originator doesn't set numerical ID in identical information,
the event data includes no numerical ID, thus userspace applications
cannot identify the control just by unique ID in event data.
This commit fix this bug so as the event data includes all of identical
information.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The returned value of 'get/seq client pool' operation has zeroed value
for its client ID, against requested client ID.
This commit fix the bug by filling it with index value of referred
client object.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
SNDRV_CTL_TLV_OP_XXX is defined but not used in core code. Instead,
raw numerical value is evaluated.
This commit replaces these values to these macros for better looking.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In the commit [2225e79b9b03: 'ALSA: core: reduce stack usage related
to snd_ctl_new()'], the id field of the newly added kctl is untouched,
thus all attribute like name string remain empty. The fix is just to
add the forgotten memcpy of the id field.
Fixes: 2225e79b9b ('ALSA: core: reduce stack usage related to snd_ctl_new()')
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There was no check about the id string of user control elements, so we
accepted even a control element with an empty string, which is
obviously bogus. This patch adds more sanity checks of id strings.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the sequencer driver is built in kernel, it may panic at boot
because of the uninitialized snd_seq_bus_type. Initialize it properly
via subsys_initcall() instead of module_init() to assure that the bus
is registered beforehand.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Fixes: 7c37ae5c62 ('ALSA: seq: Rewrite sequencer device binding with standard bus')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The kernel memory allocators already report the errors when the
requested allocation fails, thus we don't need to warn it again in
each caller side.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The kernel memory allocators already report the errors when the
requested allocation fails, thus we don't need to warn it again in
each caller side.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The kernel memory allocators already report the errors when the
requested allocation fails, thus we don't need to warn it again in
each caller side.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The callers of snd_ctl_new() need to have 'struct snd_kcontrol' data,
and pass the data as template. Then, the function allocates the structure
data again and copy from the template. This is a waste of resources.
Especially, the callers use large stack for the template.
This commit removes a need of template for the function, thus, changes
the prototype of snd_ctl_new(). Furthermore, this commit changes
the code of callers, snd_ctl_new1() and snd_ctl_elem_add() for better
shape.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The parameters can be decided in compile time.
This commit adds precomputed table to reduce calculating time.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A selection of changes for v4.1 so far. The main things are:
- Move of jack registration to the card where it belongs.
- Support for DAPM routes specified by both the machine driver and DT.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU960DAAoJECTWi3JdVIfQkKIH/RDvxRn8dvKOPF5U9Uix3chH
JWKkzqfsMP0EpmQTzCQPp0ShAyYcWSbYsopicynPxUem5vS4Z8+UmOgEEgkj59pK
USbF6v1jCQXA6BcbKyUcRRBD9FtRkfVDc7mYbRs2CcwQz2CGCgee41cvPM+2BT+z
QdNC9UJARSweGvE1IUJSfpfYOly+BJ2s0/28RaQ0PGt+I0auoYx7IMFgMSDjv2p6
PY0kyQiwm3Kyj2uNXPZ5gEuPxlw/t8n4fbQNrBYAvxzN+EF5NrGdKE3N7MI1xRV/
EkFhzy+uM3X9c37tb2lT2fgPFlBc9rgPuLPSyoQ6nxa5ghCqAlgRhzpxRem8hhU=
=VlCw
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Changes for v4.1
A selection of changes for v4.1 so far. The main things are:
- Move of jack registration to the card where it belongs.
- Support for DAPM routes specified by both the machine driver and DT.
This patch fix spelling typo found in alsa-driver-api.xml.
It is because this file is generated from comments in source files,
I have to fix source files.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Revive snd_device_disconnect() again so that it can be called from the
individual driver. This time, HD-audio will need it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a PCM draining is performed to an empty stream that has been
already in PREPARED state, the current code just ignores and leaves as
it is, although the drain is supposed to set all such streams to SETUP
state. This patch covers that overlooked case.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some codes in snd_pcm_dev_disconnect() are still valid even for
internal PCMs, but they are skipped because of the check of
list_empty(&pcm->list) at the beginning. Remove this check and put
pcm->internal checks appropriately for internal PCM object to process
through this function.
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
An internal PCM object shouldn't be added to the PCM device list, as
it's never accessed directly from the user-space, and it has no proc
or any similar accesses. Currently, it's excluded in snd_pcm_get()
and snd_pcm_next(), but it's easier not to add such an object to the
list.
Actually, the whole snd_pcm_dev_register() can be skipped for an
internal PCM. So this patch changes the code there, but also
addresses the uninitialized list_head access.
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce more generic .get_time_info to retrieve
system timestamp and audio timestamp in single routine.
Backwards compatibility is preserved with same functionality
as with .wall_clock method (to be removed in following commits
to avoid breaking git bisect)
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Let userspace select audio timestamp config, ignore and zero all
other fields
Use audio_tstamp_data to retrieve config and pass report back to
user space
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Let userspace select audio timestamp config when the
STATUS_EXT ioctl is used, ignore and zero all
other fields
No change for the existing STATUS ioctl, parameters
are treated as read-only.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A really small cleanup to consolidate snd_find_free_minor() and
snd_kernel_minor() so that we can get rid of one more ifdef.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The autoload lock became already superfluous due to the recent rework
of autoload code. Let's drop them now. This allows us to simplify a
few codes nicely.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch moves the driver object initialization and allocation to
each driver's module init/exit code like other normal drivers. The
snd_seq_driver struct is now published in seq_device.h, and each
driver is responsible to define it with proper driver attributes
(name, probe and remove) with snd_seq_driver specific attributes as id
and argsize fields. The helper functions snd_seq_driver_register(),
snd_seq_driver_unregister() and module_snd_seq_driver() are used for
simplifying codes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use const string pointer instead of copying the id string to each
object. Also drop the status and list fields of snd_seq_device struct
that are no longer used.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've used the old house-made code for binding the sequencer device
and driver. This can be far better implemented with the standard
bus nowadays.
This patch refactors the whole sequencer binding code with the bus
/sys/bus/snd_seq. The devices appear as id-card-device on this bus
and are bound with the drivers corresponding to the given id like the
former implementation. The module autoload is also kept like before.
There is no change in API functions by this patch, and almost all
transitions are kept inside seq_device.c. The proc file output will
change slightly but kept compatible as much as possible.
Further integration works will follow in later patches.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Smatch complains that "control" is user specifigy and needs to be
capped. The call tree to understand this warning is quite long.
snd_seq_write() <-- get the event from the user
snd_seq_client_enqueue_event()
snd_seq_deliver_event()
deliver_to_subscribers()
snd_seq_deliver_single_event()
snd_opl3_oss_event_input()
snd_midi_process_event()
do_control()
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In 'replace' event data, numerical ID of control is always invalid. This
commit fix this bug so as the event data has renewed numerical ID for
control.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Don't use generic snapshot of trigger_tstamp if low-level driver or
hardware can get a more precise value for better audio/system time
synchronization.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
timestamp in RUNNING mode is already taken in update_hw_ptr routine,
getting a new timestamp introduces offset between hw_ptr, audio_tstamp
and system time
Add else condition to read timestamp as fallback and only when
enabled
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently when adding a new control, the assigned numerical ID is not
set for event data, thus userspace applications cannot realize it just
by event data.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For assigning sysfs entries for a card device from the driver,
introduce a new helper function, snd_card_add_dev_attr(). In this
way, we can avoid the possible race between the device registration
and the sysfs addition / removal.
The driver can pass a new attribute group to add freely. This has to
be called before snd_card_register().
Currently, up to two extra groups can be added. More than that, it'll
return an error.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
More updates for v3.20:
- Lots of refactoring from Lars-Peter Clausen, moving drivers to more
data driven initialization and rationalizing a lot of DAPM usage.
- Much improved handling of CDCLK clocks on Samsung I2S controllers.
- Lots of driver specific cleanups and feature improvements.
- CODEC support for TI PCM514x and TLV320AIC3104 devices.
- Board support for Tegra systems with Realtek RT5677.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU0ok8AAoJECTWi3JdVIfQ3ccH/2zb+b477H4GNhUw5AEzdHtC
L7CI+5Q9VOGJQmZTjayRdUcPUHx4sTpYdQVTI56Q6CJk0OFljKNJcRrbzPqNgJ46
yOrMTIpNvzFEv46f7rX2uKfvAFOVRAA2f+gl34AMLXqxL5aydbZZBtoe2jP9lL8z
fIZ/s7qXHn3xnvxqNwOz3pnu6wFDrxbG34lXZaTaFQOueZ3fsthWLsz0xtO6a7aI
J9tA+wejd9qf+D3i6svsi+MhB6OehYMh9Fbm+ODj6NMWZGCIA3SJ/PD+gbCg318+
Xo0FNOyiw0fSAeBcHrEcfoaWBJrswxXjXaNbrIXc1/0gTj8AOJHCRus3w0OQU+Q=
=Yw2l
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v3.20
More updates for v3.20:
- Lots of refactoring from Lars-Peter Clausen, moving drivers to more
data driven initialization and rationalizing a lot of DAPM usage.
- Much improved handling of CDCLK clocks on Samsung I2S controllers.
- Lots of driver specific cleanups and feature improvements.
- CODEC support for TI PCM514x and TLV320AIC3104 devices.
- Board support for Tegra systems with Realtek RT5677.
Conflicts:
sound/soc/intel/sst-mfld-platform-pcm.c
Since the device is no longer hidden but embedded into each component,
we no longer need snd_get_device(). Let's drop it and relevant codes.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that all callers have been replaced with
snd_device_register_for_dev(), let's drop the obsolete device
registration code and concentrate only on the code handling struct
device directly. That said,
- remove the old snd_device_register(),
- rename snd_device_register_for_dev() with snd_device_register(),
- drop superfluous arguments from snd_device_register(),
- change snd_unregister_device() to pass the device pointer directly
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like previous patches, this one embeds the struct device into struct
snd_compr. As the dev field wasn't used beforehand, it's reused as
the new device struct.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the previous change for the timer device, this patch changes the
device management for the ALSA sequencer device using the struct
device directly.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a relatively straightforward change, using the struct device
directly for managing the ALSA timer device.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
... instead of card's device. This will be helpful to distinguish
errors from multiple rawmidi devices on a single card.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like previous patches, this changes the device management for rawmidi,
embedding the struct device into struct snd_rawmidi. The required
change is more or less same as hwdep device.
The currently unused dev field is reused as the new embedded struct
field now.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like previous patches, at this time we embed the struct device into
PCM object. However, this needs a bit more caution: struct snd_pcm
doesn't own one device but two, for both playback and capture! Thus
not struct snd_pcm but struct snd_pcm_str object contains the device.
Along with this change, pcm->dev field is dropped for avoiding
confusion. It was meant to point to a non-standard parent. But,
since now we can touch each struct device directly, we can manipulate
the parent field easily there, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the previous patch, this one embeds the device object into hwdep
object. For a proper object lifecycle, it's freed in the release
callback.
This also allows us to create sysfs entries via passing to the groups
field of the device without explicit function calls. Since each
driver can see the device and touch its groups field directly, we
don't need to delegate in hwdep core any longer. So, remove the
groups field from snd_hwdep, and let the user (in this case only
hda_hwdep.c) modify the device groups.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch embeds a struct device for the control device into the card
object and avoid the device creation at registration time.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce a new helper function snd_device_initialize() to initialize
the device object for sound devices.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of open-coding the search over the control file loop, provide
a helper function for the preferred subdevice assigned to the current
process.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a preliminary patch for the further work on embedding struct
device into each sound device instance. It changes
snd_register_device*() helpers to receive the device object directly
for skipping creating a device there.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add helper functions to allow drivers to specify several disjoint
ranges for a variable. In particular, there is a codec (PCM512x) that
has a hole in its supported range of rates, due to PLL and divider
restrictions.
This is like snd_pcm_hw_constraint_list(), but for ranges instead of
points.
Signed-off-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to SNDRV_SEQ_ADDRESS_BROADCAST, not all 256 port number values can
be used.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the last subscriber to a "Through" port has been removed, the
subscribed destination ports might still be active, so it would be
wrong to send "all sounds off" and "reset controller" events to them.
The proper place for such a shutdown would be the closing of the actual
MIDI port (and close_substream() in rawmidi.c already can do this).
This also fixes a deadlock when dummy_unuse() tries to send events to
its own port that is already locked because it is being freed.
Reported-by: Peter Billam <peter@www.pjb.com.au>
Cc: <stable@vger.kernel.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_midi_event_free() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add SNDRV_PCM_TRIGGER_DRAIN trigger for pcm drain.
Some audio devices require notification of drain events
in order to properly drain and shutdown an audio stream.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of opencoding them use the standard roundup_pow_of_two() and
rounddown_pow_of_two() helper functions. This gets rids one of the few users
of the custom ld2() function and also makes it a bit more obvious what the
code does.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the msbits constraints requires to specify a specific sample
format width for which the constraint should be applied. But often the
number of most significant bits is not sample format specific, but rather a
absolute limit. E.g. the PCM interface might accept 32-bit and 24-bit
samples, but the DAC has a 16-bit resolution and throws away the LSBs. In
this case for both 32-bit and 24-bit format msbits should be set to 16. This
patch extends snd_pcm_hw_constraint_msbits() so that a wildcard constraint
can be setup that is applied for all formats with a sample width larger than
the specified msbits. Choosing the wildcard constraint is done by setting
the sample width parameter of the function to 0.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If the sound card is made up of discrete components, each with their own
driver (e.g. like in the ASoC case), we might end up with multiple msbits
constraint rules installed. Currently this will result in msbits being set
to whatever the last rule set it to.
This patch updates the behavior of the rule to choose the minimum (other
than zero) of all the installed rules.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit [7a2e9ddc: ALSA: usb-audio: Add native DSD support for
Denon/Marantz DACs] requires the new format definition that has
landed only in for-next branch.
The functions snd_seq_oss_timer_delete() and vunmap() perform also input
parameter validation. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes XMOS DSD sample format to DSD_U32_BE and also adds
DSD_U16_BE and DSD_U32_BE sample formats.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Acked-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix a copy & paste error:
Warning(sound/core/pcm_native.c:1112): Excess function parameter 'state' description in 'snd_pcm_stop_xrun'
The state argument was dropped from snd_pcm_stop_xrun().
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a new helper function snd_pcm_stop_xrun() to the standard sequnce
lock/snd_pcm_stop(XRUN)/unlock by a single call, and replace the
existing open codes with this helper.
The function checks the PCM running state to prevent setting the wrong
state, too, for more safety.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We want to know the offset for the id that was passed to the function, not
the offset of the first id of the control (which is always 0).
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some state changes (e.g. snd_pcm_stop()) sets the runtime state after
calling snd_timer_notify(). This is basically racy, since the
notification may wakes up the user even before the state change.
Although the possibility is low, we should set the state before the
notifications.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This merges the USB-audio disconnect fix and resolves the conflicts
so that we can continue working on development of usb-audio stuff.
Conflicts:
sound/usb/card.c
This patch adds a new proc entry for PCM substreams to inject an
XRUN. When a PCM substream is running and any value is written to its
xrun_injection proc file, the driver triggers XRUN. This is a useful
feature for debugging XRUN and error handling code paths.
Note that this entry is enabled only when CONFIG_SND_PCM_XRUN_DEBUG is
set.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA PCM core has a mechanism tracking the PCM hwptr updates for
analyzing XRUNs. But its log is limited (up to 10) and its log output
is a kernel message, which is hard to handle.
In this patch, the hwptr logging is moved to the tracing
infrastructure instead of its own. Not only the hwptr updates but
also XRUN and hwptr errors are recorded on the trace log, so that user
can see such events at the exact timing.
The new "snd_pcm" entry will appear in the tracing events:
# ls -F /sys/kernel/debug/tracing/events/snd_pcm
enable filter hw_ptr_error/ hwptr/ xrun/
The hwptr is for the regular hwptr update events. An event trace
looks like:
aplay-26187 [004] d..3 4012.834761: hwptr: pcmC0D0p/sub0: POS: pos=488, old=0, base=0, period=1024, buf=16384
"POS" shows the hwptr update by the explicit position update call and
"IRQ" means the hwptr update by the interrupt,
i.e. snd_pcm_period_elapsed() call. The "pos" is the passed
ring-buffer offset by the caller, "old" is the previous hwptr, "base"
is the hwptr base position, "period" and "buf" are period- and
buffer-size of the target PCM substream.
(Note that the hwptr position displayed here isn't the ring-buffer
offset. It increments up to the PCM position boundary.)
The XRUN event appears similarly, but without "pos" field.
The hwptr error events appear with the PCM identifier and its reason
string, such as "Lost interrupt?".
The XRUN and hwptr error reports on kernel message are still left, can
be turned on/off via xrun_debug proc like before. But the bit 3, 4, 5
and 6 bits of xrun_debug proc are dropped by this patch. Also, along
with the change, the message strings have been reformatted to be a bit
more consistent.
Last but not least, the hwptr reporting is enabled only when
CONFIG_SND_PCM_XRUN_DEBUG is set.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While converting to dev_*(), the message showing the invalid PCM
position was wrongly tagged as if an XRUN although it's actually a
BUG. This patch corrects the message again.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The function snd_pcm_action_lock_irq() can be much simplified by
simply wrapping snd_pcm_action() with the stream lock. This was
rather the original idea, but later it was open coded for
optimization. However, looking at the optimization part closely, one
notices that the probability of the optimized path is quite low; in
normal situations, the linked stream action happens only for the
triggered substream, thus the operation becomes identical. So the
code simplification has a clear win, especially because we have now
doubly codes for both atomic and non-atomic locks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few functions have no proper documentation yet, so let's add them.
Along with it, remove superfluous blank line between the closing brace
and EXPORT_SYMBOL() line.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In compat mode, we copy each field of snd_pcm_status struct but don't
touch the reserved fields, and this leaves uninitialized values
there. Meanwhile the native ioctl does zero-clear the whole
structure, so we should follow the same rule in compat mode, too.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On x86, using dma_mmap_coherent() for the pages allocated via
dma_alloc_coherent() results in a warning like:
aplay:32536 map pfn RAM range req uncached-minus for [mem 0x21d500000-0x21d51ffff], got write-back
Until the issue is addressed in the core side, take back to the old
good way in PCM code only for x86.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
this is a series of patches to just convert the plain info callback
for enum ctl elements to snd_ctl_elem_info(). Also, it includes the
extension of snd_ctl_elem_info(), for catching the unexpected string
cut-off and handling the zero items.
Some architectures like PARISC is known not to support mmap properly
with the DMA buffer, where dma_mmap_coherent() returns -EINVAL
unconditionally. From the API POV, we should rather drop the mmap
support there and expose it before the user-space tries to call mmap.
The patch contains again ugly ifdef's, unfortunately, as there is no
global flag indicating this. Once when such macro is defined, we can
get rid of this instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since we have consistently dma_mmap_coherent() for all architectures,
the current ifdef and arch-specific codes in pcm core can be cleaned
up gracefully.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As PCM core handles the multiple linked streams in parallel, lockdep
gets confused (partly because of weak annotations) and spews the
false-positive warnings. This hasn't been a problem for long time but
the latest PCM lock path update seems to have woken up a sleeping
dog.
Here is an attempt to paper over this issue: pass the lock subclass
just calculated from the depth in snd_pcm_action_group(). Also, a
(possibly) wrong lock subclass set in snd_pcm_action_lock_mutex() is
dropped, too.
Reported-and-tested-by: Arthur Marsh <arthur.marsh@internode.on.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although this is weird, some drivers want to allow empty control
elements intentionally, e.g. the number of items may change depending
on the firmware status. Let the function simply returning in such a
case.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since we're calling request_module() asynchronously now, we can get
rid of the autoload lock in snd_seq_device_register_driver(), as well
as in the snd-seq driver registration itself. This enables the
automatic loading of dependent sequencer modules, such as
snd-seq-virmidi from snd-emu10k1-synth.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the sequencer module binding is performed independently from
the card module itself. The reason behind it is to keep the sequencer
stuff optional and allow the system running without it (e.g. for using
PCM or rawmidi only). This works in most cases, but a remaining
problem is that the binding isn't done automatically when a new driver
module is probed. Typically this becomes visible when a hotplug
driver like usb audio is used.
This patch tries to address this and other potential issues. First,
the seq-binder (seq_device.c) tries to load a missing driver module at
creating a new device object. This is done asynchronously in a workq
for avoiding the deadlock (modprobe call in module init path).
This action, however, should be enabled only when the sequencer stuff
was already initialized, i.e. snd-seq module was already loaded. For
that, a new function, snd_seq_autoload_init() is introduced here; this
clears the blocking of autoloading, and also tries to load all pending
driver modules.
Reported-by: Adam Goode <agoode@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the unlock loop of snd_pcm_action_group(), the object "s" is used
as the check of nonatomic PCM, but it should be rather "s1", which is
the iterator of the loop. This supposedly causes a kernel panic when
the substreams in operatino are linked.
Fixes: 257f8cce5d ('ALSA: pcm: Allow nonatomic trigger operations')
Reported-and-tested-by: Arthur Marsh <arthur.marsh@internode.on.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a NULL check in snd_pci_quirk_lookup() so that NULL can be passed
as a pci_dev pointer. This fixes the possible NULL dereferences in
HD-audio drivers.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai