Fix drivers/md/dm-cache-background-tracker.c:169:16: warning: symbol
'alloc_work' was not declared. Should it be static?
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit 6b5e718cc1 ("dm bufio: relax alignment constraint on slab
cache") relaxed alignment on dm-bufio cache, however it may break
dm-crypt or dm-integrity.
dm-crypt and dm-integrity require that the size of bio vector entries
(bv_len) is aligned on its sector size. bv_offset doesn't have to be
aligned, but bv_len must be. XFS sends unaligned bios, but they do not
cross page boundary, so the requirement for aligned bv_len is met.
Commit 6b5e718cc1 made dm-bufio send unaligned bios that cross page
boundary, this could break dm-crypt and dm-integrity.
Reinstates the alignment. Note that misaligned entries only happen when
we use slab/slub debugging. Without debugging, the entries are always
aligned.
Fixes: 6b5e718cc1 ("dm bufio: relax alignment constraint on slab cache")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Use kvfree instead of kfree because the array is allocated with kvmalloc.
Fixes: 7eada909bf ("dm: add integrity target")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Allocations from the rs_pool can invoke init_rs() from the mempool
allocation callback. This is problematic in fec_alloc_bufs() which invokes
mempool_alloc() with GFP_NOIO to prevent a swap deadlock because init_rs()
uses GFP_KERNEL allocations.
Switch it to init_rs_gfp() and invoke it with the gfp_t flags which are
handed in from the allocator.
Note: This is not a problem today because the rs control struct is shared
between the instances and its created when the mempool is initialized. But
the upcoming changes which switch to a rs_control struct per instance to
embed decoder buffers will trigger the swap vs. GFP_KERNEL issue.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Neil Brown <neilb@suse.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull MD fixes from Shaohua Li:
"Three small fixes for MD:
- md-cluster fix for faulty device from Guoqing
- writehint fix for writebehind IO for raid1 from Mariusz
- a live lock fix for interrupted recovery from Yufen"
* tag 'md/4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
raid1: copy write hint from master bio to behind bio
md/raid1: exit sync request if MD_RECOVERY_INTR is set
md-cluster: don't update recovery_offset for faulty device
* A rework of the filesytem-dax implementation provides for detection of
unmap operations (truncate / hole punch) colliding with in-progress
device-DMA. A fix for these collisions remains a work-in-progress
pending resolution of truncate latency and starvation regressions.
* The of_pmem driver expands the users of libnvdimm outside of x86 and
ACPI to describe an implementation of persistent memory on PowerPC with
Open Firmware / Device tree.
* Address Range Scrub (ARS) handling is completely rewritten to account for
the fact that ARS may run for 100s of seconds and there is no platform
defined way to cancel it. ARS will now no longer block namespace
initialization.
* The NVDIMM Namespace Label implementation is updated to handle label
areas as small as 1K, down from 128K.
* Miscellaneous cleanups and updates to unit test infrastructure.
-----BEGIN PGP SIGNATURE-----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=acZQ
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"This cycle was was not something I ever want to repeat as there were
several late changes that have only now just settled.
Half of the branch up to commit d2c997c0f1 ("fs, dax: use
page->mapping to warn...") have been in -next for several releases.
The of_pmem driver and the address range scrub rework were late
arrivals, and the dax work was scaled back at the last moment.
The of_pmem driver missed a previous merge window due to an oversight.
A sense of obligation to rectify that miss is why it is included for
4.17. It has acks from PowerPC folks. Stephen reported a build failure
that only occurs when merging it with your latest tree, for now I have
fixed that up by disabling modular builds of of_pmem. A test merge
with your tree has received a build success report from the 0day robot
over 156 configs.
An initial version of the ARS rework was submitted before the merge
window. It is self contained to libnvdimm, a net code reduction, and
passing all unit tests.
The filesystem-dax changes are based on the wait_var_event()
functionality from tip/sched/core. However, late review feedback
showed that those changes regressed truncate performance to a large
degree. The branch was rewound to drop the truncate behavior change
and now only includes preparation patches and cleanups (with full acks
and reviews). The finalization of this dax-dma-vs-trnucate work will
need to wait for 4.18.
Summary:
- A rework of the filesytem-dax implementation provides for detection
of unmap operations (truncate / hole punch) colliding with
in-progress device-DMA. A fix for these collisions remains a
work-in-progress pending resolution of truncate latency and
starvation regressions.
- The of_pmem driver expands the users of libnvdimm outside of x86
and ACPI to describe an implementation of persistent memory on
PowerPC with Open Firmware / Device tree.
- Address Range Scrub (ARS) handling is completely rewritten to
account for the fact that ARS may run for 100s of seconds and there
is no platform defined way to cancel it. ARS will now no longer
block namespace initialization.
- The NVDIMM Namespace Label implementation is updated to handle
label areas as small as 1K, down from 128K.
- Miscellaneous cleanups and updates to unit test infrastructure"
* tag 'libnvdimm-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (39 commits)
libnvdimm, of_pmem: workaround OF_NUMA=n build error
nfit, address-range-scrub: add module option to skip initial ars
nfit, address-range-scrub: rework and simplify ARS state machine
nfit, address-range-scrub: determine one platform max_ars value
powerpc/powernv: Create platform devs for nvdimm buses
doc/devicetree: Persistent memory region bindings
libnvdimm: Add device-tree based driver
libnvdimm: Add of_node to region and bus descriptors
libnvdimm, region: quiet region probe
libnvdimm, namespace: use a safe lookup for dimm device name
libnvdimm, dimm: fix dpa reservation vs uninitialized label area
libnvdimm, testing: update the default smart ctrl_temperature
libnvdimm, testing: Add emulation for smart injection commands
nfit, address-range-scrub: introduce nfit_spa->ars_state
libnvdimm: add an api to cast a 'struct nd_region' to its 'struct device'
nfit, address-range-scrub: fix scrub in-progress reporting
dax, dm: allow device-mapper to operate without dax support
dax: introduce CONFIG_DAX_DRIVER
fs, dax: use page->mapping to warn if truncate collides with a busy page
ext2, dax: introduce ext2_dax_aops
...
We met a sync thread stuck as follows:
raid1_sync_request+0x2c9/0xb50
md_do_sync+0x983/0xfa0
md_thread+0x11c/0x160
kthread+0x111/0x130
ret_from_fork+0x35/0x40
0xffffffffffffffff
At the same time, there is a stuck mdadm thread (mdadm --manage
/dev/md2 --add /dev/sda). It is trying to stop the sync thread:
kthread_stop+0x42/0xf0
md_unregister_thread+0x3a/0x70
md_reap_sync_thread+0x15/0x160
action_store+0x142/0x2a0
md_attr_store+0x6c/0xb0
kernfs_fop_write+0x102/0x180
__vfs_write+0x33/0x170
vfs_write+0xad/0x1a0
SyS_write+0x52/0xc0
do_syscall_64+0x6e/0x190
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Debug tools show that the sync thread is waiting in raise_barrier(),
until raid1d() end all normal IO bios into bio_end_io_list(introduced
in commit 55ce74d4bf). But, raid1d() cannot end these bios if
MD_CHANGE_PENDING bit is set. It needs to get mddev->reconfig_mutex lock
and then clear the bit in md_check_recovery().
However, the lock is holding by mdadm in action_store().
Thus, there is a loop:
mdadm waiting for sync thread to stop, sync thread waiting for
raid1d() to end bios, raid1d() waiting for mdadm to release
mddev->reconfig_mutex lock and then it can end bios.
Fix this by checking MD_RECOVERY_INTR while waiting in raise_barrier(),
so that sync thread can exit while mdadm is stoping the sync thread.
Fixes: 55ce74d4bf ("md/raid1: ensure device failure recorded before write request returns.")
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Device could become faulty when clustered array handling
METADATA_UPDATED msg, so we don't need to call read_rdev
for this device.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
that table's block devices, while issuing the ioctl to one of those
block devices.
- DM core passthrough ioctl fix to _not_ override the fmode_t used to
issue the ioctl. Overriding by using the fmode_t that the block
device was originally open with during DM table load is a liability.
- Add DM core support for secure erase forwarding and update the DM
linear and DM striped targets to support them.
- A DM core 4.16 stable fix to allow abnormal IO (e.g. discard, write
same, write zeroes) for targets that make use of the non-splitting IO
variant (as is done for multipath or thinp when layered directly on
NVMe).
- Allow DM targets to return a payload in response to a DM message that
they are sent. This is useful for DM targets that would like to
provide statistics data in response to DM messages.
- Update DM bufio to support non-power-of-2 block sizes. Numerous other
related changes prepare the DM bufio code for this support.
- Fix DM crypt to use a bounded amount of memory across the entire
system. This is to avoid OOM that can otherwise occur in response to
certain pathological IO workloads (e.g. discarding a large DM crypt
device).
- Add a 'check_at_most_once' feature to the DM verity target to allow
verity to be used on mobile devices that have very limited resources.
- Fix the DM integrity target to fail early if a keyed algorithm
(e.g. HMAC) is to be used but the key isn't set.
- Add non-power-of-2 support to the DM unstripe target.
- Eliminate the use of a Variable Length Array in the DM stripe target.
- Update the DM log-writes target to record metadata (REQ_META flag).
- DM raid fixes for its nosync status and some variable range issues.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaxjrCAAoJEMUj8QotnQNaEW8IAMeb6dWbxBgCleafK7GV5I0B
jdm6NWDGoGrhz5TyZXbd6pLXD6fbU51O2Jn/LyQ7KOY1lRlS66TBprR60gNyzPQn
bQVVEbKnSMwNAnkVpStiVZSs2e9HyNIRsM0yvwZXPfcVw6Q8XttiJQHRdGu4A5jm
i+/aoyAf1iJowe5ituyE569gFGnOzPmesKZoF2/A36ik3yq3HF4FR0IPxWKseSpt
gCeGTPpBv3aRonRBDxT9uOwb3SXC8TGrStRLm1I6UFwmHKs7nWx/o/P1ghbSOgSt
Gu+GdoXnG5qtzAZ1t3sR2Iw3zEmpO1t5Jht5VqR7T+1145DaoPkW5M8vyjHll5o=
=H7V5
-----END PGP SIGNATURE-----
Merge tag 'for-4.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- DM core passthrough ioctl fix to retain reference to DM table, and
that table's block devices, while issuing the ioctl to one of those
block devices.
- DM core passthrough ioctl fix to _not_ override the fmode_t used to
issue the ioctl. Overriding by using the fmode_t that the block
device was originally open with during DM table load is a liability.
- Add DM core support for secure erase forwarding and update the DM
linear and DM striped targets to support them.
- A DM core 4.16 stable fix to allow abnormal IO (e.g. discard, write
same, write zeroes) for targets that make use of the non-splitting IO
variant (as is done for multipath or thinp when layered directly on
NVMe).
- Allow DM targets to return a payload in response to a DM message that
they are sent. This is useful for DM targets that would like to
provide statistics data in response to DM messages.
- Update DM bufio to support non-power-of-2 block sizes. Numerous other
related changes prepare the DM bufio code for this support.
- Fix DM crypt to use a bounded amount of memory across the entire
system. This is to avoid OOM that can otherwise occur in response to
certain pathological IO workloads (e.g. discarding a large DM crypt
device).
- Add a 'check_at_most_once' feature to the DM verity target to allow
verity to be used on mobile devices that have very limited resources.
- Fix the DM integrity target to fail early if a keyed algorithm (e.g.
HMAC) is to be used but the key isn't set.
- Add non-power-of-2 support to the DM unstripe target.
- Eliminate the use of a Variable Length Array in the DM stripe target.
- Update the DM log-writes target to record metadata (REQ_META flag).
- DM raid fixes for its nosync status and some variable range issues.
* tag 'for-4.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (28 commits)
dm: remove fmode_t argument from .prepare_ioctl hook
dm: hold DM table for duration of ioctl rather than use blkdev_get
dm raid: fix parse_raid_params() variable range issue
dm verity: make verity_for_io_block static
dm verity: add 'check_at_most_once' option to only validate hashes once
dm bufio: don't embed a bio in the dm_buffer structure
dm bufio: support non-power-of-two block sizes
dm bufio: use slab cache for dm_buffer structure allocations
dm bufio: reorder fields in dm_buffer structure
dm bufio: relax alignment constraint on slab cache
dm bufio: remove code that merges slab caches
dm bufio: get rid of slab cache name allocations
dm bufio: move dm-bufio.h to include/linux/
dm bufio: delete outdated comment
dm: add support for secure erase forwarding
dm: backfill abnormal IO support to non-splitting IO submission
dm raid: fix nosync status
dm mpath: use DM_MAPIO_SUBMITTED instead of magic number 0 in process_queued_bios()
dm stripe: get rid of a Variable Length Array (VLA)
dm log writes: record metadata flag for better flags record
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=RVhK
-----END PGP SIGNATURE-----
Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
"It's a pretty quiet round this time, which is nice. This contains:
- series from Bart, cleaning up the way we set/test/clear atomic
queue flags.
- series from Bart, fixing races between gendisk and queue
registration and removal.
- set of bcache fixes and improvements from various folks, by way of
Michael Lyle.
- set of lightnvm updates from Matias, most of it being the 1.2 to
2.0 transition.
- removal of unused DIO flags from Nikolay.
- blk-mq/sbitmap memory ordering fixes from Omar.
- divide-by-zero fix for BFQ from Paolo.
- minor documentation patches from Randy.
- timeout fix from Tejun.
- Alpha "can't write a char atomically" fix from Mikulas.
- set of NVMe fixes by way of Keith.
- bsg and bsg-lib improvements from Christoph.
- a few sed-opal fixes from Jonas.
- cdrom check-disk-change deadlock fix from Maurizio.
- various little fixes, comment fixes, etc from various folks"
* tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits)
blk-mq: Directly schedule q->timeout_work when aborting a request
blktrace: fix comment in blktrace_api.h
lightnvm: remove function name in strings
lightnvm: pblk: remove some unnecessary NULL checks
lightnvm: pblk: don't recover unwritten lines
lightnvm: pblk: implement 2.0 support
lightnvm: pblk: implement get log report chunk
lightnvm: pblk: rename ppaf* to addrf*
lightnvm: pblk: check for supported version
lightnvm: implement get log report chunk helpers
lightnvm: make address conversions depend on generic device
lightnvm: add support for 2.0 address format
lightnvm: normalize geometry nomenclature
lightnvm: complete geo structure with maxoc*
lightnvm: add shorten OCSSD version in geo
lightnvm: add minor version to generic geometry
lightnvm: simplify geometry structure
lightnvm: pblk: refactor init/exit sequences
lightnvm: Avoid validation of default op value
lightnvm: centralize permission check for lightnvm ioctl
...
Use the fmode_t that is passed to dm_blk_ioctl() rather than
inconsistently (varies across targets) drop it on the floor by
overriding it with the fmode_t stored in 'struct dm_dev'.
All the persistent reservation functions weren't using the fmode_t they
got back from .prepare_ioctl so remove them.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit 519049afea ("dm: use blkdev_get rather than bdgrab when issuing
pass-through ioctl") inadvertantly introduced a regression relative to
users of device cgroups that issue ioctls (e.g. libvirt). Using
blkdev_get() in DM's passthrough ioctl support implicitly introduced a
cgroup permissions check that would fail unless care were taken to add
all devices in the IO stack to the device cgroup. E.g. rather than just
adding the top-level DM multipath device to the cgroup all the
underlying devices would need to be allowed.
Fix this, to no longer require allowing all underlying devices, by
simply holding the live DM table (which includes the table's original
blkdev_get() reference on the blockdevice that the ioctl will be issued
to) for the duration of the ioctl.
Also, bump the DM ioctl version so a user can know that their device
cgroup allow workaround is no longer needed.
Reported-by: Michal Privoznik <mprivozn@redhat.com>
Suggested-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 519049afea ("dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl")
Cc: stable@vger.kernel.org # 4.16
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
parse_raid_params() compares variable "int value" with INT_MAX.
E.g. related Coverity report excerpt:
CID 1364818 (#2 of 3): Operands don't affect result (CONSTANT_EXPRESSION_RESULT) [select issue]
1433 if (value > INT_MAX) {
Fix by changing checks to avoid INT_MAX.
Whilst on it, avoid unnecessary checks against constants
and add check for sane recovery speed min/max.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fixes the following sparse warning:
drivers/md/dm-verity-target.c:375:6: warning:
symbol 'verity_for_io_block' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This allows platforms that are CPU/memory contrained to verify data
blocks only the first time they are read from the data device, rather
than every time. As such, it provides a reduced level of security
because only offline tampering of the data device's content will be
detected, not online tampering.
Hash blocks are still verified each time they are read from the hash
device, since verification of hash blocks is less performance critical
than data blocks, and a hash block will not be verified any more after
all the data blocks it covers have been verified anyway.
This option introduces a bitset that is used to check if a block has
been validated before or not. A block can be validated more than once
as there is no thread protection for the bitset.
These changes were developed and tested on entry-level Android Go
devices.
Signed-off-by: Patrik Torstensson <totte@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The bio structure consumes a substantial part of dm_buffer. The bio
structure is only needed when doing I/O on the buffer, thus we don't
have to embed it in the buffer.
Allocate the bio structure only when doing I/O.
We don't need to create a bio_set because, in case of allocation
failure, dm-bufio falls back to using dm-io (which keeps its own
bio_set).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Support block sizes that are not a power-of-two (but they must be a
multiple of 512b). As always, a slab cache is used for allocations.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
kmalloc padded to the next power of two, using a slab cache avoids this.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reorder fields in dm_buffer structure to improve packing and reduce
structure size. The compiler allocates 32-bit integer for field 'enum
data_mode', so change it to unsigned char.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The I/O buffer doesn't have to be aligned on block size granularity,
relax alignment to ARCH_KMALLOC_MINALIGN (required to allow DMA from
slab cache memory on some architectures).
Also, set SLAB_RECLAIM_ACCOUNT so that the memory allocated from the
cache is accounted as reclaimable and doesn't inflate the 'used' entry
in the free command.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
All slab allocators can merge duplicate caches. So dm-bufio doesn't
need extra slab merging logic. Instead it can just allocate one slab
cache per client and let the allocator merge them.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm-bufio keeps the dm_bufio_cache_names array that holds names of the
slab caches.
Since the commit db265eca77 ("mm/sl[aou]b: Move duping of slab name to
slab_common.c"), the kernel automatically duplicates the slab cache name
when creating the slab cache, so we no longer have to keep the name
allocated.
Remove the code that allocates the slab names and keeps them around.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Move dm-bufio.h to include/linux/ so that external GPL'd DM target
modules can use it.
It is better to allow the use of dm-bufio than force external modules
to implement the equivalent buffered IO mechanism in some new way. The
hope is this will encourage the use of dm-bufio; which will then make it
easier for a GPL'd external DM target module to be included upstream.
A couple dm-bufio EXPORT_SYMBOL exports have also been updated to use
EXPORT_SYMBOL_GPL.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This comment was true when dm-bufio was written but, since 4.3, bios can
now have arbitrary size and the driver splits them.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Set QUEUE_FLAG_SECERASE in DM device's queue_flags if a DM table's
data devices support secure erase.
Also, add support for secure erase to both the linear and striped
targets.
Signed-off-by: Denis Semakin <d.semakin@omprussia.ru>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Otherwise, these abnormal IOs would be sent to the DM target
regardless of whether the target advertised support for them.
Factor out __process_abnormal_io() from __split_and_process_non_flush()
so that discards, write same, etc may be conditionally processed.
Fixes: 978e51ba3 ("dm: optimize bio-based NVMe IO submission")
Cc: stable@vger.kernel.org # 4.16
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fix a race for "nosync" activations providing "aa.." device health
characters and "0/N" sync ratio rather than "AA..." and "N/N". Occurs
when status for the raid set is retrieved during resume before the MD
sync thread starts and clears the MD_RECOVERY_NEEDED flag.
Cc: stable@vger.kernel.org # 4.16+
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Ideally, we'd like to get rid of all VLAs in the kernel and add -Wvla to
the build args: https://lkml.org/lkml/2018/3/7/621
This one is a simple case, since we don't actually need the VLA at all: we
can just iterate over the stripes twice, once to emit their names, and the
second time to emit status (i.e. trade memory for time). Since the number
of stripes is probably low, this is hopefully not that expensive.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
So developer could distinguish data and metadata bios easier.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Since crypto API commit 9fa68f6200 ("crypto: hash - prevent using keyed
hashes without setting key") dm-integrity cannot use keyed algorithms
without the key being set.
The dm-integrity recognizes this too late (during use of HMAC), so it
allows creation and formatting of superblock, but the device is in fact
unusable.
Fix it by detecting the key requirement in integrity table constructor.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This target's kernel module being named dm-unstripe.ko doesn't allow
lvm2's DM module autoload capability to load the dm-unstripe.ko
because lvm2 looks for dm-unstriped.ko due to the target name being
"unstriped".
Add the "dm-unstriped" module alias to resolve this oversight.
NOTE: this isn't needed for the "striped" target, despite its source
file being named dm-stripe.c, because it is part of dm-mod.ko.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Address "FIXME: must support non power of 2 chunk_size, dm-stripe.c does".
Bump target version to indicate change.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Tested-by: Scott Bauer <Scott.Bauer@intel.com>
Reviewed-by: Scott Bauer <Scott.Bauer@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm-crypt consumes an excessive amount memory when the user attempts to
zero a dm-crypt device with "blkdiscard -z". The command "blkdiscard -z"
calls the BLKZEROOUT ioctl, it goes to the function __blkdev_issue_zeroout,
__blkdev_issue_zeroout sends a large amount of write bios that contain
the zero page as their payload.
For each incoming page, dm-crypt allocates another page that holds the
encrypted data, so when processing "blkdiscard -z", dm-crypt tries to
allocate the amount of memory that is equal to the size of the device.
This can trigger OOM killer or cause system crash.
Fix this by limiting the amount of memory that dm-crypt allocates to 2%
of total system memory. This limit is system-wide and is divided by the
number of active dm-crypt devices and each device receives an equal
share.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Could be useful for a target to return stats or other information.
If a target does DMEMIT() anything to @result from its .message method
then it must return 1 to the caller.
Signed-off-By: Mike Snitzer <snitzer@redhat.com>
Change device-mapper's DAX dependency to require the presence of at
least one DAX_DRIVER. This allows device-mapper to be built without
bringing the DAX core along which is especially wasteful when there are
no DAX drivers, like BLK_DEV_PMEM, configured.
Cc: Alasdair Kergon <agk@redhat.com>
Reported-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
dm_get_bdev_for_ioctl()'s return of 0 or 1 must be the result from
prepare_ioctl (1 means the ioctl was issued to a partition, 0 means it
wasn't). Unfortunately commit 519049afea ("dm: use blkdev_get rather
than bdgrab when issuing pass-through ioctl") reused the variable 'r'
to store the return from blkdev_get() that follows prepare_ioctl()
-- whereby dropping prepare_ioctl()'s result on the floor.
This can lead to an ioctl or persistent reservation being issued to a
partition going unnoticed, which implies the extra permission check for
CAP_SYS_RAWIO is skipped.
Fix this by using a different variable to store blkdev_get()'s return.
Fixes: 519049afea ("dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl")
Reported-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The ability to have multipath dynamically attach a scsi_dh, that the user
specified in the multipath table, was broken by commit e8f74a0f00 ("dm
mpath: eliminate need to use scsi_device_from_queue").
Restore the ability to load, and attach, a particular scsi_dh module if
one is specified (as noticed by checking m->hw_handler_name).
Fixes: e8f74a0f00 ("dm mpath: eliminate need to use scsi_device_from_queue")
Reported-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Avoid that building with W=1 triggers the following compiler warning:
drivers/md/bcache/super.c:776:20: warning: comparison is always false due to limited range of data type [-Wtype-limits]
d->nr_stripes > SIZE_MAX / sizeof(atomic_t)) {
^
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add more annotations for sparse to inform it about which functions do
not have the same number of spin_lock() and spin_unlock() calls.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch does not change any functionality.
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Avoid that building with W=1 triggers warnings about the kernel-doc
headers.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch avoids that building with W=1 triggers complaints about
switch fall-throughs.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make it possible for the compiler to verify the consistency of the
format string passed to __bch_check_keys() and the arguments that
should be formatted according to that format string.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch avoids that smatch complains about inconsistent indentation.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a bcache device is configured to writeback mode, current code does not
handle write I/O errors on backing devices properly.
In writeback mode, write request is written to cache device, and
latter being flushed to backing device. If I/O failed when writing from
cache device to the backing device, bcache code just ignores the error and
upper layer code is NOT noticed that the backing device is broken.
This patch tries to handle backing device failure like how the cache device
failure is handled,
- Add a error counter 'io_errors' and error limit 'error_limit' in struct
cached_dev. Add another io_disable to struct cached_dev to disable I/Os
on the problematic backing device.
- When I/O error happens on backing device, increase io_errors counter. And
if io_errors reaches error_limit, set cache_dev->io_disable to true, and
stop the bcache device.
The result is, if backing device is broken of disconnected, and I/O errors
reach its error limit, backing device will be disabled and the associated
bcache device will be removed from system.
Changelog:
v2: remove "bcache: " prefix in pr_error(), and use correct name string to
print out bcache device gendisk name.
v1: indeed this is new added in v2 patch set.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In order to catch I/O error of backing device, a separate bi_end_io
call back is required. Then a per backing device counter can record I/O
errors number and retire the backing device if the counter reaches a
per backing device I/O error limit.
This patch adds backing_request_endio() to bcache backing device I/O code
path, this is a preparation for further complicated backing device failure
handling. So far there is no real code logic change, I make this change a
separate patch to make sure it is stable and reliable for further work.
Changelog:
v2: Fix code comments typo, remove a redundant bch_writeback_add() line
added in v4 patch set.
v1: indeed this is new added in this patch set.
[mlyle: truncated commit subject]
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Cc: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In current code closure debug file is outside of debug directory
and when unloading module there is lack of removing operation
for closure debug file, so it will cause creating error when trying
to reload module.
This patch move closure debug file into "bcache" debug direcory
so that the file can get deleted properly.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In bch_mca_scan(), There are some confusion and logical error in the use of
loop variables. In this patch, we clarify them as:
1) nr: the number of btree nodes needs to scan, which will decrease after
we scan a btree node, and should not be less than 0;
2) i: the number of btree nodes have scanned, includes both
btree_cache_freeable and btree_cache, which should not be bigger than
btree_cache_used;
3) freed: the number of btree nodes have freed.
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In bch_mca_scan(), the return value should not be the number of freed btree
nodes, but the number of pages of freed btree nodes.
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stripe size is shown as zero when no strip in back end device:
[root@ceph132 ~]# cat /sys/block/sdd/bcache/stripe_size
0.0k
Actually it should be 1T Bytes (1 << 31 sectors), but in sysfs
interface, stripe_size was changed from sectors to bytes, and move
9 bits left, so the 32 bits variable overflows.
This patch change the variable to a 64 bits type before moving bits.
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we run IO in a detached device, and run iostat to shows IO status,
normally it will show like bellow (Omitted some fields):
Device: ... avgrq-sz avgqu-sz await r_await w_await svctm %util
sdd ... 15.89 0.53 1.82 0.20 2.23 1.81 52.30
bcache0 ... 15.89 115.42 0.00 0.00 0.00 2.40 69.60
but after IO stopped, there are still very big avgqu-sz and %util
values as bellow:
Device: ... avgrq-sz avgqu-sz await r_await w_await svctm %util
bcache0 ... 0 5326.32 0.00 0.00 0.00 0.00 100.10
The reason for this issue is that, only generic_start_io_acct() called
and no generic_end_io_acct() called for detached device in
cached_dev_make_request(). See the code:
//start generic_start_io_acct()
generic_start_io_acct(q, rw, bio_sectors(bio), &d->disk->part0);
if (cached_dev_get(dc)) {
//will callback generic_end_io_acct()
}
else {
//will not call generic_end_io_acct()
}
This patch calls generic_end_io_acct() in the end of IO for detached
devices, so we can show IO state correctly.
(Modified to use GFP_NOIO in kzalloc() by Coly Li)
Changelog:
v2: fix typo.
v1: the initial version.
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When there are too many I/O errors on cache device, current bcache code
will retire the whole cache set, and detach all bcache devices. But the
detached bcache devices are not stopped, which is problematic when bcache
is in writeback mode.
If the retired cache set has dirty data of backing devices, continue
writing to bcache device will write to backing device directly. If the
LBA of write request has a dirty version cached on cache device, next time
when the cache device is re-registered and backing device re-attached to
it again, the stale dirty data on cache device will be written to backing
device, and overwrite latest directly written data. This situation causes
a quite data corruption.
But we cannot simply stop all attached bcache devices when the cache set is
broken or disconnected. For example, use bcache to accelerate performance
of an email service. In such workload, if cache device is broken but no
dirty data lost, keep the bcache device alive and permit email service
continue to access user data might be a better solution for the cache
device failure.
Nix <nix@esperi.org.uk> points out the issue and provides the above example
to explain why it might be necessary to not stop bcache device for broken
cache device. Pavel Goran <via-bcache@pvgoran.name> provides a brilliant
suggestion to provide "always" and "auto" options to per-cached device
sysfs file stop_when_cache_set_failed. If cache set is retiring and the
backing device has no dirty data on cache, it should be safe to keep the
bcache device alive. In this case, if stop_when_cache_set_failed is set to
"auto", the device failure handling code will not stop this bcache device
and permit application to access the backing device with a unattached
bcache device.
Changelog:
[mlyle: edited to not break string constants across lines]
v3: fix typos pointed out by Nix.
v2: change option values of stop_when_cache_set_failed from 1/0 to
"auto"/"always".
v1: initial version, stop_when_cache_set_failed can be 0 (not stop) or 1
(always stop).
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Cc: Nix <nix@esperi.org.uk>
Cc: Pavel Goran <via-bcache@pvgoran.name>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When too many I/Os failed on cache device, bch_cache_set_error() is called
in the error handling code path to retire whole problematic cache set. If
new I/O requests continue to come and take refcount dc->count, the cache
set won't be retired immediately, this is a problem.
Further more, there are several kernel thread and self-armed kernel work
may still running after bch_cache_set_error() is called. It needs to wait
quite a while for them to stop, or they won't stop at all. They also
prevent the cache set from being retired.
The solution in this patch is, to add per cache set flag to disable I/O
request on this cache and all attached backing devices. Then new coming I/O
requests can be rejected in *_make_request() before taking refcount, kernel
threads and self-armed kernel worker can stop very fast when flags bit
CACHE_SET_IO_DISABLE is set.
Because bcache also do internal I/Os for writeback, garbage collection,
bucket allocation, journaling, this kind of I/O should be disabled after
bch_cache_set_error() is called. So closure_bio_submit() is modified to
check whether CACHE_SET_IO_DISABLE is set on cache_set->flags. If set,
closure_bio_submit() will set bio->bi_status to BLK_STS_IOERR and
return, generic_make_request() won't be called.
A sysfs interface is also added to set or clear CACHE_SET_IO_DISABLE bit
from cache_set->flags, to disable or enable cache set I/O for debugging. It
is helpful to trigger more corner case issues for failed cache device.
Changelog
v4, add wait_for_kthread_stop(), and call it before exits writeback and gc
kernel threads.
v3, change CACHE_SET_IO_DISABLE from 4 to 3, since it is bit index.
remove "bcache: " prefix when printing out kernel message.
v2, more changes by previous review,
- Use CACHE_SET_IO_DISABLE of cache_set->flags, suggested by Junhui.
- Check CACHE_SET_IO_DISABLE in bch_btree_gc() to stop a while-loop, this
is reported and inspired from origal patch of Pavel Vazharov.
v1, initial version.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Pavel Vazharov <freakpv@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
struct delayed_work writeback_rate_update in struct cache_dev is a delayed
worker to call function update_writeback_rate() in period (the interval is
defined by dc->writeback_rate_update_seconds).
When a metadate I/O error happens on cache device, bcache error handling
routine bch_cache_set_error() will call bch_cache_set_unregister() to
retire whole cache set. On the unregister code path, this delayed work is
stopped by calling cancel_delayed_work_sync(&dc->writeback_rate_update).
dc->writeback_rate_update is a special delayed work from others in bcache.
In its routine update_writeback_rate(), this delayed work is re-armed
itself. That means when cancel_delayed_work_sync() returns, this delayed
work can still be executed after several seconds defined by
dc->writeback_rate_update_seconds.
The problem is, after cancel_delayed_work_sync() returns, the cache set
unregister code path will continue and release memory of struct cache set.
Then the delayed work is scheduled to run, __update_writeback_rate()
will reference the already released cache_set memory, and trigger a NULL
pointer deference fault.
This patch introduces two more bcache device flags,
- BCACHE_DEV_WB_RUNNING
bit set: bcache device is in writeback mode and running, it is OK for
dc->writeback_rate_update to re-arm itself.
bit clear:bcache device is trying to stop dc->writeback_rate_update,
this delayed work should not re-arm itself and quit.
- BCACHE_DEV_RATE_DW_RUNNING
bit set: routine update_writeback_rate() is executing.
bit clear: routine update_writeback_rate() quits.
This patch also adds a function cancel_writeback_rate_update_dwork() to
wait for dc->writeback_rate_update quits before cancel it by calling
cancel_delayed_work_sync(). In order to avoid a deadlock by unexpected
quit dc->writeback_rate_update, after time_out seconds this function will
give up and continue to call cancel_delayed_work_sync().
And here I explain how this patch stops self re-armed delayed work properly
with the above stuffs.
update_writeback_rate() sets BCACHE_DEV_RATE_DW_RUNNING at its beginning
and clears BCACHE_DEV_RATE_DW_RUNNING at its end. Before calling
cancel_writeback_rate_update_dwork() clear flag BCACHE_DEV_WB_RUNNING.
Before calling cancel_delayed_work_sync() wait utill flag
BCACHE_DEV_RATE_DW_RUNNING is clear. So when calling
cancel_delayed_work_sync(), dc->writeback_rate_update must be already re-
armed, or quite by seeing BCACHE_DEV_WB_RUNNING cleared. In both cases
delayed work routine update_writeback_rate() won't be executed after
cancel_delayed_work_sync() returns.
Inside update_writeback_rate() before calling schedule_delayed_work(), flag
BCACHE_DEV_WB_RUNNING is checked before. If this flag is cleared, it means
someone is about to stop the delayed work. Because flag
BCACHE_DEV_RATE_DW_RUNNING is set already and cancel_delayed_work_sync()
has to wait for this flag to be cleared, we don't need to worry about race
condition here.
If update_writeback_rate() is scheduled to run after checking
BCACHE_DEV_RATE_DW_RUNNING and before calling cancel_delayed_work_sync()
in cancel_writeback_rate_update_dwork(), it is also safe. Because at this
moment BCACHE_DEV_WB_RUNNING is cleared with memory barrier. As I mentioned
previously, update_writeback_rate() will see BCACHE_DEV_WB_RUNNING is clear
and quit immediately.
Because there are more dependences inside update_writeback_rate() to struct
cache_set memory, dc->writeback_rate_update is not a simple self re-arm
delayed work. After trying many different methods (e.g. hold dc->count, or
use locks), this is the only way I can find which works to properly stop
dc->writeback_rate_update delayed work.
Changelog:
v3: change values of BCACHE_DEV_WB_RUNNING and BCACHE_DEV_RATE_DW_RUNNING
to bit index, for test_bit().
v2: Try to fix the race issue which is pointed out by Junhui.
v1: The initial version for review
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Junhui Tang <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In patch "bcache: fix cached_dev->count usage for bch_cache_set_error()",
cached_dev_get() is called when creating dc->writeback_thread, and
cached_dev_put() is called when exiting dc->writeback_thread. This
modification works well unless people detach the bcache device manually by
'echo 1 > /sys/block/bcache<N>/bcache/detach'
Because this sysfs interface only calls bch_cached_dev_detach() which wakes
up dc->writeback_thread but does not stop it. The reason is, before patch
"bcache: fix cached_dev->count usage for bch_cache_set_error()", inside
bch_writeback_thread(), if cache is not dirty after writeback,
cached_dev_put() will be called here. And in cached_dev_make_request() when
a new write request makes cache from clean to dirty, cached_dev_get() will
be called there. Since we don't operate dc->count in these locations,
refcount d->count cannot be dropped after cache becomes clean, and
cached_dev_detach_finish() won't be called to detach bcache device.
This patch fixes the issue by checking whether BCACHE_DEV_DETACHING is
set inside bch_writeback_thread(). If this bit is set and cache is clean
(no existing writeback_keys), break the while-loop, call cached_dev_put()
and quit the writeback thread.
Please note if cache is still dirty, even BCACHE_DEV_DETACHING is set the
writeback thread should continue to perform writeback, this is the original
design of manually detach.
It is safe to do the following check without locking, let me explain why,
+ if (!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags) &&
+ (!atomic_read(&dc->has_dirty) || !dc->writeback_running)) {
If the kenrel thread does not sleep and continue to run due to conditions
are not updated in time on the running CPU core, it just consumes more CPU
cycles and has no hurt. This should-sleep-but-run is safe here. We just
focus on the should-run-but-sleep condition, which means the writeback
thread goes to sleep in mistake while it should continue to run.
1, First of all, no matter the writeback thread is hung or not,
kthread_stop() from cached_dev_detach_finish() will wake up it and
terminate by making kthread_should_stop() return true. And in normal
run time, bit on index BCACHE_DEV_DETACHING is always cleared, the
condition
!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags)
is always true and can be ignored as constant value.
2, If one of the following conditions is true, the writeback thread should
go to sleep,
"!atomic_read(&dc->has_dirty)" or "!dc->writeback_running)"
each of them independently controls the writeback thread should sleep or
not, let's analyse them one by one.
2.1 condition "!atomic_read(&dc->has_dirty)"
If dc->has_dirty is set from 0 to 1 on another CPU core, bcache will
call bch_writeback_queue() immediately or call bch_writeback_add() which
indirectly calls bch_writeback_queue() too. In bch_writeback_queue(),
wake_up_process(dc->writeback_thread) is called. It sets writeback
thread's task state to TASK_RUNNING and following an implicit memory
barrier, then tries to wake up the writeback thread.
In writeback thread, its task state is set to TASK_INTERRUPTIBLE before
doing the condition check. If other CPU core sets the TASK_RUNNING state
after writeback thread setting TASK_INTERRUPTIBLE, the writeback thread
will be scheduled to run very soon because its state is not
TASK_INTERRUPTIBLE. If other CPU core sets the TASK_RUNNING state before
writeback thread setting TASK_INTERRUPTIBLE, the implict memory barrier
of wake_up_process() will make sure modification of dc->has_dirty on
other CPU core is updated and observed on the CPU core of writeback
thread. Therefore the condition check will correctly be false, and
continue writeback code without sleeping.
2.2 condition "!dc->writeback_running)"
dc->writeback_running can be changed via sysfs file, every time it is
modified, a following bch_writeback_queue() is alwasy called. So the
change is always observed on the CPU core of writeback thread. If
dc->writeback_running is changed from 0 to 1 on other CPU core, this
condition check will observe the modification and allow writeback
thread to continue to run without sleeping.
Now we can see, even without a locking protection, multiple conditions
check is safe here, no deadlock or process hang up will happen.
I compose a separte patch because that patch "bcache: fix cached_dev->count
usage for bch_cache_set_error()" already gets a "Reviewed-by:" from Hannes
Reinecke. Also this fix is not trivial and good for a separate patch.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Huijun Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When bcache metadata I/O fails, bcache will call bch_cache_set_error()
to retire the whole cache set. The expected behavior to retire a cache
set is to unregister the cache set, and unregister all backing device
attached to this cache set, then remove sysfs entries of the cache set
and all attached backing devices, finally release memory of structs
cache_set, cache, cached_dev and bcache_device.
In my testing when journal I/O failure triggered by disconnected cache
device, sometimes the cache set cannot be retired, and its sysfs
entry /sys/fs/bcache/<uuid> still exits and the backing device also
references it. This is not expected behavior.
When metadata I/O failes, the call senquence to retire whole cache set is,
bch_cache_set_error()
bch_cache_set_unregister()
bch_cache_set_stop()
__cache_set_unregister() <- called as callback by calling
clousre_queue(&c->caching)
cache_set_flush() <- called as a callback when refcount
of cache_set->caching is 0
cache_set_free() <- called as a callback when refcount
of catch_set->cl is 0
bch_cache_set_release() <- called as a callback when refcount
of catch_set->kobj is 0
I find if kernel thread bch_writeback_thread() quits while-loop when
kthread_should_stop() is true and searched_full_index is false, clousre
callback cache_set_flush() set by continue_at() will never be called. The
result is, bcache fails to retire whole cache set.
cache_set_flush() will be called when refcount of closure c->caching is 0,
and in function bcache_device_detach() refcount of closure c->caching is
released to 0 by clousre_put(). In metadata error code path, function
bcache_device_detach() is called by cached_dev_detach_finish(). This is a
callback routine being called when cached_dev->count is 0. This refcount
is decreased by cached_dev_put().
The above dependence indicates, cache_set_flush() will be called when
refcount of cache_set->cl is 0, and refcount of cache_set->cl to be 0
when refcount of cache_dev->count is 0.
The reason why sometimes cache_dev->count is not 0 (when metadata I/O fails
and bch_cache_set_error() called) is, in bch_writeback_thread(), refcount
of cache_dev is not decreased properly.
In bch_writeback_thread(), cached_dev_put() is called only when
searched_full_index is true and cached_dev->writeback_keys is empty, a.k.a
there is no dirty data on cache. In most of run time it is correct, but
when bch_writeback_thread() quits the while-loop while cache is still
dirty, current code forget to call cached_dev_put() before this kernel
thread exits. This is why sometimes cache_set_flush() is not executed and
cache set fails to be retired.
The reason to call cached_dev_put() in bch_writeback_rate() is, when the
cache device changes from clean to dirty, cached_dev_get() is called, to
make sure during writeback operatiions both backing and cache devices
won't be released.
Adding following code in bch_writeback_thread() does not work,
static int bch_writeback_thread(void *arg)
}
+ if (atomic_read(&dc->has_dirty))
+ cached_dev_put()
+
return 0;
}
because writeback kernel thread can be waken up and start via sysfs entry:
echo 1 > /sys/block/bcache<N>/bcache/writeback_running
It is difficult to check whether backing device is dirty without race and
extra lock. So the above modification will introduce potential refcount
underflow in some conditions.
The correct fix is, to take cached dev refcount when creating the kernel
thread, and put it before the kernel thread exits. Then bcache does not
need to take a cached dev refcount when cache turns from clean to dirty,
or to put a cached dev refcount when cache turns from ditry to clean. The
writeback kernel thread is alwasy safe to reference data structure from
cache set, cache and cached device (because a refcount of cache device is
taken for it already), and no matter the kernel thread is stopped by I/O
errors or system reboot, cached_dev->count can always be used correctly.
The patch is simple, but understanding how it works is quite complicated.
Changelog:
v2: set dc->writeback_thread to NULL in this patch, as suggested by Hannes.
v1: initial version for review.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After v4.12 commit e2460f2a4b ("dm: mark targets that pass integrity
data"), dm-multipath, e.g. on DIF+DIX SCSI disk paths, does not support
block integrity any more. So add it to the whitelist.
This is also a pre-requisite to use block integrity with other dm layer(s)
on top of multipath, such as kpartx partitions (dm-linear) or LVM.
Also, bump target version to reflect this fix.
Fixes: e2460f2a4b ("dm: mark targets that pass integrity data")
Cc: <stable@vger.kernel.org> #4.12+
Bisected-by: Fedor Loshakov <loshakov@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Initialize all the scsi_dh related 'struct multipath' members regardless
of whether a scsi_dh is in use or not.
The subtle (and fragile) SCSI-assuming legacy code clearly needs further
decoupling from non-SCSI (and/or developer understanding).
Fixes: 8d47e65948 ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks")
Reported-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=1Ukr
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180309' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- a xen-blkfront fix from Bhavesh with a multiqueue fix when
detaching/re-attaching
- a few important NVMe fixes, including a revert for a sysfs fix that
caused some user space confusion
- two bcache fixes by way of Michael Lyle
- a loop regression fix, fixing an issue with lost writes on DAX.
* tag 'for-linus-20180309' of git://git.kernel.dk/linux-block:
loop: Fix lost writes caused by missing flag
nvme_fc: rework sqsize handling
nvme-fabrics: Ignore nr_io_queues option for discovery controllers
xen-blkfront: move negotiate_mq to cover all cases of new VBDs
Revert "nvme: create 'slaves' and 'holders' entries for hidden controllers"
bcache: don't attach backing with duplicate UUID
bcache: fix crashes in duplicate cache device register
nvme: pci: pass max vectors as num_possible_cpus() to pci_alloc_irq_vectors
nvme-pci: Fix EEH failure on ppc
This patch has been generated as follows:
for verb in set_unlocked clear_unlocked set clear; do
replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \
$(git grep -lw queue_flag_${verb} drivers block/bsg*)
done
Except for protecting all queue flag changes with the queue lock
this patch does not change any functionality.
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the blk_queue_flag_{set,clear}() functions instead of open-coding
these.
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In practice this is really only meaningful in the context of the DM
multipath target (which uses dm_table_set_type() to set the type of
device DM should create via its "queue_mode" option).
So this change allows a DM multipath device with "queue_mode bio" to be
upgraded from DM_TYPE_BIO_BASED to DM_TYPE_NVME_BIO_BASED -- iff the
underlying device(s) are NVMe.
DM_TYPE_NVME_BIO_BASED is just a DM core implementation detail that
allows for NVMe-specific optimizations (e.g. use direct_make_request
instead of generic_make_request). If in the future there is no benefit
or need to distinguish NVMe vs not: then it will be removed.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This eliminates the "queue_mode" configuration's "nvme" mode. There
wasn't anything NVMe-specific about that mode. It was named "nvme"
because it was a short name for the mode. But the entire point of the
mode was to optimize the multipath target for underlying devices that
are _not_ SCSI-based. Devices that aren't SCSI have no need for the
various SCSI device handler (scsi_dh) specific code in DM multipath.
But rather than narrowly define this scsi_dh vs not branching in terms
of "nvme": invert the logic so that we're just checking whether a
multipath device is layered on SCSI devices with scsi_dh attached.
This allows any future storage technology to avoid scsi_dh specific code
in the multipath target too.
Fixes: 848b8aefd4 ("dm mpath: optimize NVMe bio-based support")
Suggested-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The strncmp function should compare 4 bytes.
Fixes: 22c11858e8 ("dm: introduce DM_TYPE_NVME_BIO_BASED")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Upstream commit 4102d9de6d ("dm raid: fix rs_get_progress()
synchronization state/ratio") in combination with commit 7c29744ecc
("dm raid: simplify rs_get_progress()") introduced a regression by
incorrectly reporting a sync_ratio of 0 for degraded raid sets. This
caused lvm2 to fail to repair raid legs automatically.
Fix by identifying the degraded state by checking the MD_RECOVERY_INTR
flag and returning mddev->recovery_cp in case it is set.
MD sets recovery = [ MD_RECOVERY_RECOVER MD_RECOVERY_INTR
MD_RECOVERY_NEEDED ] when a RAID member fails. It then shuts down any
sync thread that is running and leaves us with all MD_RECOVERY_* flags
cleared. The bug occurs if a status is requested in the short time it
takes to shut down any sync thread and clear the flags, because we were
keying in on the MD_RECOVERY_NEEDED - understanding it to be the initial
phase of a “recover” sync thread. However, this is an incorrect
interpretation if MD_RECOVERY_INTR is also set.
This also explains why the bug only happened when automatic repair was
enabled and not a normal ‘manual’ method. It is impossible to react
quick enough to hit the problematic window without it being automated.
Fix passes automatic repair tests.
Fixes: 7c29744ecc ("dm raid: simplify rs_get_progress()")
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Otherwise an underlying device's teardown (e.g. SCSI) may race with the
DM ioctl or persistent reservation and result in dereferencing driver
memory that gets freed when the underlying device's final blkdev_put()
occurs.
bdgrab() only increases the refcount for the block_device's inode to
ensure the block_device struct itself will not be freed, but does not
guarantee the block_device will remain associated with the gendisk or
its storage.
Cc: stable@vger.kernel.org # 4.8+
Reported-by: David Jeffery <djeffery@redhat.com>
Suggested-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Ben Marzinski <bmarzins@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
gcc-6.3 and earlier show a new warning after a seemingly unrelated
change to the arm64 PAGE_KERNEL definition:
In file included from drivers/md/dm-bufio.c:14:0:
drivers/md/dm-bufio.c: In function 'alloc_buffer':
include/linux/sched/mm.h:182:56: warning: 'noio_flag' may be used uninitialized in this function [-Wmaybe-uninitialized]
current->flags = (current->flags & ~PF_MEMALLOC_NOIO) | flags;
^
The same warning happened earlier on linux-3.18 for MIPS and I did a
workaround for that, but now it's come back.
gcc-7 and newer are apparently smart enough to figure this out, and
other architectures don't show it, so the best I could come up with is
to rework the caller slightly in a way that makes it obvious enough to
all arm64 compilers what is happening here.
Fixes: 41acec6240 ("arm64: kpti: Make use of nG dependent on arm64_kernel_unmapped_at_el0()")
Link: https://patchwork.kernel.org/patch/9692829/
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[snitzer: moved declarations inside conditional, altered vmalloc return]
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This can happen e.g. during disk cloning.
This is an incomplete fix: it does not catch duplicate UUIDs earlier
when things are still unattached. It does not unregister the device.
Further changes to cope better with this are planned but conflict with
Coly's ongoing improvements to handling device errors. In the meantime,
one can manually stop the device after this has happened.
Attempts to attach a duplicate device result in:
[ 136.372404] loop: module loaded
[ 136.424461] bcache: register_bdev() registered backing device loop0
[ 136.424464] bcache: bch_cached_dev_attach() Tried to attach loop0 but duplicate UUID already attached
My test procedure is:
dd if=/dev/sdb1 of=imgfile bs=1024 count=262144
losetup -f imgfile
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AMhV
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180302' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A collection of fixes for this series. This is a little larger than
usual at this time, but that's mainly because I was out on vacation
last week. Nothing in here is major in any way, it's just two weeks of
fixes. This contains:
- NVMe pull from Keith, with a set of fixes from the usual suspects.
- mq-deadline zone unlock fix from Damien, fixing an issue with the
SMR zone locking added for 4.16.
- two bcache fixes sent in by Michael, with changes from Coly and
Tang.
- comment typo fix from Eric for blktrace.
- return-value error handling fix for nbd, from Gustavo.
- fix a direct-io case where we don't defer to a completion handler,
making us sleep from IRQ device completion. From Jan.
- a small series from Jan fixing up holes around handling of bdev
references.
- small set of regression fixes from Jiufei, mostly fixing problems
around the gendisk pointer -> partition index change.
- regression fix from Ming, fixing a boundary issue with the discard
page cache invalidation.
- two-patch series from Ming, fixing both a core blk-mq-sched and
kyber issue around token freeing on a requeue condition"
* tag 'for-linus-20180302' of git://git.kernel.dk/linux-block: (24 commits)
block: fix a typo
block: display the correct diskname for bio
block: fix the count of PGPGOUT for WRITE_SAME
mq-deadline: Make sure to always unlock zones
nvmet: fix PSDT field check in command format
nvme-multipath: fix sysfs dangerously created links
nbd: fix return value in error handling path
bcache: fix kcrashes with fio in RAID5 backend dev
bcache: correct flash only vols (check all uuids)
blktrace_api.h: fix comment for struct blk_user_trace_setup
blockdev: Avoid two active bdev inodes for one device
genhd: Fix BUG in blkdev_open()
genhd: Fix use after free in __blkdev_get()
genhd: Add helper put_disk_and_module()
genhd: Rename get_disk() to get_disk_and_module()
genhd: Fix leaked module reference for NVME devices
direct-io: Fix sleep in atomic due to sync AIO
nvme-pci: Fix nvme queue cleanup if IRQ setup fails
block: kyber: fix domain token leak during requeue
blk-mq: don't call io sched's .requeue_request when requeueing rq to ->dispatch
...
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the disk, partition and bdi sysfs attributes before cleaning up
the request queue associated with the disk.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 2831231d4c ("bcache: reduce cache_set devices iteration by
devices_max_used") adds c->devices_max_used to reduce iteration of
c->uuids elements, this value is updated in bcache_device_attach().
But for flash only volume, when calling flash_devs_run(), the function
bcache_device_attach() is not called yet and c->devices_max_used is not
updated. The unexpected result is, the flash only volume won't be run
by flash_devs_run().
This patch fixes the issue by iterate all c->uuids elements in
flash_devs_run(). c->devices_max_used will be updated properly when
bcache_device_attach() gets called.
[mlyle: commit subject edited for character limit]
Fixes: 2831231d4c ("bcache: reduce cache_set devices iteration by devices_max_used")
Reported-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a potential deadlock if mount/umount happens when
raid5_finish_reshape() tries to grow the size of emulated disk.
How the deadlock happens?
1) The raid5 resync thread finished reshape (expanding array).
2) The mount or umount thread holds VFS sb->s_umount lock and tries to
write through critical data into raid5 emulated block device. So it
waits for raid5 kernel thread handling stripes in order to finish it
I/Os.
3) In the routine of raid5 kernel thread, md_check_recovery() will be
called first in order to reap the raid5 resync thread. That is,
raid5_finish_reshape() will be called. In this function, it will try
to update conf and call VFS revalidate_disk() to grow the raid5
emulated block device. It will try to acquire VFS sb->s_umount lock.
The raid5 kernel thread cannot continue, so no one can handle mount/
umount I/Os (stripes). Once the write-through I/Os cannot be finished,
mount/umount will not release sb->s_umount lock. The deadlock happens.
The raid5 kernel thread is an emulated block device. It is responible to
handle I/Os (stripes) from upper layers. The emulated block device
should not request any I/Os on itself. That is, it should not call VFS
layer functions. (If it did, it will try to acquire VFS locks to
guarantee the I/Os sequence.) So we have the resync thread to send
resync I/O requests and to wait for the results.
For solving this potential deadlock, we can put the size growth of the
emulated block device as the final step of reshape thread.
2017/12/29:
Thanks to Guoqing Jiang <gqjiang@suse.com>,
we confirmed that there is the same deadlock issue in raid10. It's
reproducible and can be fixed by this patch. For raid10.c, we can remove
the similar code to prevent deadlock as well since they has been called
before.
Reported-by: Alex Wu <alexwu@synology.com>
Reviewed-by: Alex Wu <alexwu@synology.com>
Reviewed-by: Chung-Chiang Cheng <cccheng@synology.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
gcc warns about a possible overflow of the kmem_cache string, when adding
four characters to a string of the same length:
drivers/md/raid5.c: In function 'setup_conf':
drivers/md/raid5.c:2207:34: error: '-alt' directive writing 4 bytes into a region of size between 1 and 32 [-Werror=format-overflow=]
sprintf(conf->cache_name[1], "%s-alt", conf->cache_name[0]);
^~~~
drivers/md/raid5.c:2207:2: note: 'sprintf' output between 5 and 36 bytes into a destination of size 32
sprintf(conf->cache_name[1], "%s-alt", conf->cache_name[0]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If I'm counting correctly, we need 11 characters for the fixed part
of the string and 18 characters for a 64-bit pointer (when no gendisk
is used), so that leaves three characters for conf->level, which should
always be sufficient.
This makes the code use snprintf() with the correct length, to
make the code more robust against changes, and to get the compiler
to shut up.
In commit f4be6b43f1 ("md/raid5: ensure we create a unique name for
kmem_cache when mddev has no gendisk") from 2010, Neil said that
the pointer could be removed "shortly" once devices without gendisk
are disallowed. I have no idea if that happened, but if it did, that
should probably be changed as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
Add missing bio completion. Without this any flush request would hang.
Fixes: 1532d9e87e ("raid5-ppl: PPL support for disks with write-back cache enabled")
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
In the case of 'recover', an r10bio with R10BIO_WriteError &
R10BIO_IsRecover will be progressed by handle_write_completed().
This function traverses all r10bio->devs[copies].
If devs[m].repl_bio != NULL, it thinks conf->mirrors[dev].replacement
is also not NULL. However, this is not always true.
When there is an rdev of raid10 has replacement, then each r10bio
->devs[m].repl_bio != NULL in conf->r10buf_pool. However, in 'recover',
even if corresponded replacement is NULL, it doesn't clear r10bio
->devs[m].repl_bio, resulting in replacement NULL deference.
This bug was introduced when replacement support for raid10 was
added in Linux 3.3.
As NeilBrown suggested:
Elsewhere the determination of "is this device part of the
resync/recovery" is made by resting bio->bi_end_io.
If this is end_sync_write, then we tried to write here.
If it is NULL, then we didn't try to write.
Fixes: 9ad1aefc8a ("md/raid10: Handle replacement devices during resync.")
Cc: stable (V3.3+)
Suggested-by: NeilBrown <neilb@suse.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
The locking protocols in md assume that a device will
never be removed from an array during resync/recovery/reshape.
When that isn't happening, rcu or reconfig_mutex is needed
to protect an rdev pointer while taking a refcount. When
it is happening, that protection isn't needed.
Unfortunately there are cases were remove_and_add_spares() is
called when recovery might be happening: is state_store(),
slot_store() and hot_remove_disk().
In each case, this is just an optimization, to try to expedite
removal from the personality so the device can be removed from
the array. If resync etc is happening, we just have to wait
for md_check_recover to find a suitable time to call
remove_and_add_spares().
This optimization and not essential so it doesn't
matter if it fails.
So change remove_and_add_spares() to abort early if
resync/recovery/reshape is happening, unless it is called
from md_check_recovery() as part of a newly started recovery.
The parameter "this" is only NULL when called from
md_check_recovery() so when it is NULL, there is no need to abort.
As this can result in a NULL dereference, the fix is suitable
for -stable.
cc: yuyufen <yuyufen@huawei.com>
Cc: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Fixes: 8430e7e0af ("md: disconnect device from personality before trying to remove it.")
Cc: stable@ver.kernel.org (v4.8+)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
The rdev pointer kept in the local 'config' for each for
raid1, raid10, raid4/5/6 has non-obvious lifetime rules.
Sometimes RCU is needed, sometimes a lock, something nothing.
Add documentation to explain this.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
If no metadata devices are configured on raid1/4/5/6/10
(e.g. via dm-raid), md_write_start() unconditionally waits
for superblocks to be written thus deadlocking.
Fix introduces mddev->has_superblocks bool, defines it in md_run()
and checks for it in md_write_start() to conditionally avoid waiting.
Once on it, check for non-existing superblocks in md_super_write().
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198647
Fixes: cc27b0c78c ("md: fix deadlock between mddev_suspend() and md_write_start()")
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
To align with raid1's resync window, we need to
set the resync window of raid10 to 32M as well.
Fixes: 8db87912c9 ("md-cluster: Use a small window for raid10 resync")
Reported-by: Zhilong Liu <zlliu@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
A single character (closing square bracket) should be put into a sequence.
Thus use the corresponding function "seq_putc".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
Don't use shrinker.nr_deferred to check whether shrinker was
initialized or not. Now this check was integrated into
unregister_shrinker(), so it is safe to call it against
unregistered shrinker.
Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
dec_pending() is given an error status (possibly 0) to be recorded
against a bio. It can be called several times on the one 'struct
dm_io', and it is careful to only assign a non-zero error to
io->status. However when it then assigned io->status to bio->bi_status,
it is not careful and could overwrite a genuine error status with 0.
This can happen when chained bios are in use. If a bio is chained
beneath the bio that this dm_io is handling, the child bio might
complete and set bio->bi_status before the dm_io completes.
This has been possible since chained bios were introduced in 3.14, and
has become a lot easier to trigger with commit 18a25da843 ("dm: ensure
bio submission follows a depth-first tree walk") as that commit caused
dm to start using chained bios itself.
A particular failure mode is that if a bio spans an 'error' target and a
working target, the 'error' fragment will complete instantly and set the
->bi_status, and the other fragment will normally complete a little
later, and will clear ->bi_status.
The fix is simply to only assign io_error to bio->bi_status when
io_error is not zero.
Reported-and-tested-by: Milan Broz <gmazyland@gmail.com>
Cc: stable@vger.kernel.org (v3.14+)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
back-end device sdm has already attached a cache_set with ID
f67ebe1f-f8bc-4d73-bfe5-9dc88607f119, then try to attach with
another cache set, and it returns with an error:
[root]# cd /sys/block/sdm/bcache
[root]# echo 5ccd0a63-148e-48b8-afa2-aca9cbd6279f > attach
-bash: echo: write error: Invalid argument
After that, execute a command to modify the label of bcache
device:
[root]# echo data_disk1 > label
Then we reboot the system, when the system power on, the back-end
device can not attach to cache_set, a messages show in the log:
Feb 5 12:05:52 ceph152 kernel: [922385.508498] bcache:
bch_cached_dev_attach() couldn't find uuid for sdm in set
In sysfs_attach(), dc->sb.set_uuid was assigned to the value
which input through sysfs, no matter whether it is success
or not in bch_cached_dev_attach(). For example, If the back-end
device has already attached to an cache set, bch_cached_dev_attach()
would fail, but dc->sb.set_uuid was changed. Then modify the
label of bcache device, it will call bch_write_bdev_super(),
which would write the dc->sb.set_uuid to the super block, so we
record a wrong cache set ID in the super block, after the system
reboot, the cache set couldn't find the uuid of the back-end
device, so the bcache device couldn't exist and use any more.
In this patch, we don't assigned cache set ID to dc->sb.set_uuid
in sysfs_attach() directly, but input it into bch_cached_dev_attach(),
and assigned dc->sb.set_uuid to the cache set ID after the back-end
device attached to the cache set successful.
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
I attach a back-end device to a cache set, and the cache set is not
registered yet, this back-end device did not attach successfully, and no
error returned:
[root]# echo 87859280-fec6-4bcc-20df7ca8f86b > /sys/block/sde/bcache/attach
[root]#
In sysfs_attach(), the return value "v" is initialized to "size" in
the beginning, and if no cache set exist in bch_cache_sets, the "v" value
would not change any more, and return to sysfs, sysfs regard it as success
since the "size" is a positive number.
This patch fixes this issue by assigning "v" with "-ENOENT" in the
initialization.
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
dc->writeback_rate_update_seconds can be set via sysfs and its value can
be set to [1, ULONG_MAX]. It does not make sense to set such a large
value, 60 seconds is long enough value considering the default 5 seconds
works well for long time.
Because dc->writeback_rate_update is a special delayed work, it re-arms
itself inside the delayed work routine update_writeback_rate(). When
stopping it by cancel_delayed_work_sync(), there should be a timeout to
wait and make sure the re-armed delayed work is stopped too. A small max
value of dc->writeback_rate_update_seconds is also helpful to decide a
reasonable small timeout.
This patch limits sysfs interface to set dc->writeback_rate_update_seconds
in range of [1, 60] seconds, and replaces the hand-coded number by macros.
Changelog:
v2: fix a rebase typo in v4, which is pointed out by Michael Lyle.
v1: initial version.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After long time running of random small IO writing,
I reboot the machine, and after the machine power on,
I found bcache got stuck, the stack is:
[root@ceph153 ~]# cat /proc/2510/task/*/stack
[<ffffffffa06b2455>] closure_sync+0x25/0x90 [bcache]
[<ffffffffa06b6be8>] bch_journal+0x118/0x2b0 [bcache]
[<ffffffffa06b6dc7>] bch_journal_meta+0x47/0x70 [bcache]
[<ffffffffa06be8f7>] bch_prio_write+0x237/0x340 [bcache]
[<ffffffffa06a8018>] bch_allocator_thread+0x3c8/0x3d0 [bcache]
[<ffffffff810a631f>] kthread+0xcf/0xe0
[<ffffffff8164c318>] ret_from_fork+0x58/0x90
[<ffffffffffffffff>] 0xffffffffffffffff
[root@ceph153 ~]# cat /proc/2038/task/*/stack
[<ffffffffa06b1abd>] __bch_btree_map_nodes+0x12d/0x150 [bcache]
[<ffffffffa06b1bd1>] bch_btree_insert+0xf1/0x170 [bcache]
[<ffffffffa06b637f>] bch_journal_replay+0x13f/0x230 [bcache]
[<ffffffffa06c75fe>] run_cache_set+0x79a/0x7c2 [bcache]
[<ffffffffa06c0cf8>] register_bcache+0xd48/0x1310 [bcache]
[<ffffffff812f702f>] kobj_attr_store+0xf/0x20
[<ffffffff8125b216>] sysfs_write_file+0xc6/0x140
[<ffffffff811dfbfd>] vfs_write+0xbd/0x1e0
[<ffffffff811e069f>] SyS_write+0x7f/0xe0
[<ffffffff8164c3c9>] system_call_fastpath+0x16/0x1
The stack shows the register thread and allocator thread
were getting stuck when registering cache device.
I reboot the machine several times, the issue always
exsit in this machine.
I debug the code, and found the call trace as bellow:
register_bcache()
==>run_cache_set()
==>bch_journal_replay()
==>bch_btree_insert()
==>__bch_btree_map_nodes()
==>btree_insert_fn()
==>btree_split() //node need split
==>btree_check_reserve()
In btree_check_reserve(), It will check if there is enough buckets
of RESERVE_BTREE type, since allocator thread did not work yet, so
no buckets of RESERVE_BTREE type allocated, so the register thread
waits on c->btree_cache_wait, and goes to sleep.
Then the allocator thread initialized, the call trace is bellow:
bch_allocator_thread()
==>bch_prio_write()
==>bch_journal_meta()
==>bch_journal()
==>journal_wait_for_write()
In journal_wait_for_write(), It will check if journal is full by
journal_full(), but the long time random small IO writing
causes the exhaustion of journal buckets(journal.blocks_free=0),
In order to release the journal buckets,
the allocator calls btree_flush_write() to flush keys to
btree nodes, and waits on c->journal.wait until btree nodes writing
over or there has already some journal buckets space, then the
allocator thread goes to sleep. but in btree_flush_write(), since
bch_journal_replay() is not finished, so no btree nodes have journal
(condition "if (btree_current_write(b)->journal)" never satisfied),
so we got no btree node to flush, no journal bucket released,
and allocator sleep all the times.
Through the above analysis, we can see that:
1) Register thread wait for allocator thread to allocate buckets of
RESERVE_BTREE type;
2) Alloctor thread wait for register thread to replay journal, so it
can flush btree nodes and get journal bucket.
then they are all got stuck by waiting for each other.
Hua Rui provided a patch for me, by allocating some buckets of
RESERVE_BTREE type in advance, so the register thread can get bucket
when btree node splitting and no need to waiting for the allocator
thread. I tested it, it has effect, and register thread run a step
forward, but finally are still got stuck, the reason is only 8 bucket
of RESERVE_BTREE type were allocated, and in bch_journal_replay(),
after 2 btree nodes splitting, only 4 bucket of RESERVE_BTREE type left,
then btree_check_reserve() is not satisfied anymore, so it goes to sleep
again, and in the same time, alloctor thread did not flush enough btree
nodes to release a journal bucket, so they all got stuck again.
So we need to allocate more buckets of RESERVE_BTREE type in advance,
but how much is enough? By experience and test, I think it should be
as much as journal buckets. Then I modify the code as this patch,
and test in the machine, and it works.
This patch modified base on Hua Rui’s patch, and allocate more buckets
of RESERVE_BTREE type in advance to avoid register thread and allocate
thread going to wait for each other.
[patch v2] ca->sb.njournal_buckets would be 0 in the first time after
cache creation, and no journal exists, so just 8 btree buckets is OK.
Signed-off-by: Hua Rui <huarui.dev@gmail.com>
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Struct cache uses io_errors for two purposes,
- Error decay: when cache set error_decay is set, io_errors is used to
generate a small piece of delay when I/O error happens.
- I/O errors counter: in order to generate big enough value for error
decay, I/O errors counter value is stored by left shifting 20 bits (a.k.a
IO_ERROR_SHIFT).
In function bch_count_io_errors(), if I/O errors counter reaches cache set
error limit, bch_cache_set_error() will be called to retire the whold cache
set. But current code is problematic when checking the error limit, see the
following code piece from bch_count_io_errors(),
90 if (error) {
91 char buf[BDEVNAME_SIZE];
92 unsigned errors = atomic_add_return(1 << IO_ERROR_SHIFT,
93 &ca->io_errors);
94 errors >>= IO_ERROR_SHIFT;
95
96 if (errors < ca->set->error_limit)
97 pr_err("%s: IO error on %s, recovering",
98 bdevname(ca->bdev, buf), m);
99 else
100 bch_cache_set_error(ca->set,
101 "%s: too many IO errors %s",
102 bdevname(ca->bdev, buf), m);
103 }
At line 94, errors is right shifting IO_ERROR_SHIFT bits, now it is real
errors counter to compare at line 96. But ca->set->error_limit is initia-
lized with an amplified value in bch_cache_set_alloc(),
1545 c->error_limit = 8 << IO_ERROR_SHIFT;
It means by default, in bch_count_io_errors(), before 8<<20 errors happened
bch_cache_set_error() won't be called to retire the problematic cache
device. If the average request size is 64KB, it means bcache won't handle
failed device until 512GB data is requested. This is too large to be an I/O
threashold. So I believe the correct error limit should be much less.
This patch sets default cache set error limit to 8, then in
bch_count_io_errors() when errors counter reaches 8 (if it is default
value), function bch_cache_set_error() will be called to retire the whole
cache set. This patch also removes bits shifting when store or show
io_error_limit value via sysfs interface.
Nowadays most of SSDs handle internal flash failure automatically by LBA
address re-indirect mapping. If an I/O error can be observed by upper layer
code, it will be a notable error because that SSD can not re-indirect
map the problematic LBA address to an available flash block. This situation
indicates the whole SSD will be failed very soon. Therefore setting 8 as
the default io error limit value makes sense, it is enough for most of
cache devices.
Changelog:
v2: add reviewed-by from Hannes.
v1: initial version for review.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kernel thread routine bch_writeback_thread() has the following code block,
447 down_write(&dc->writeback_lock);
448~450 if (check conditions) {
451 up_write(&dc->writeback_lock);
452 set_current_state(TASK_INTERRUPTIBLE);
453
454 if (kthread_should_stop())
455 return 0;
456
457 schedule();
458 continue;
459 }
If condition check is true, its task state is set to TASK_INTERRUPTIBLE
and call schedule() to wait for others to wake up it.
There are 2 issues in current code,
1, Task state is set to TASK_INTERRUPTIBLE after the condition checks, if
another process changes the condition and call wake_up_process(dc->
writeback_thread), then at line 452 task state is set back to
TASK_INTERRUPTIBLE, the writeback kernel thread will lose a chance to be
waken up.
2, At line 454 if kthread_should_stop() is true, writeback kernel thread
will return to kernel/kthread.c:kthread() with TASK_INTERRUPTIBLE and
call do_exit(). It is not good to enter do_exit() with task state
TASK_INTERRUPTIBLE, in following code path might_sleep() is called and a
warning message is reported by __might_sleep(): "WARNING: do not call
blocking ops when !TASK_RUNNING; state=1 set at [xxxx]".
For the first issue, task state should be set before condition checks.
Ineed because dc->writeback_lock is required when modifying all the
conditions, calling set_current_state() inside code block where dc->
writeback_lock is hold is safe. But this is quite implicit, so I still move
set_current_state() before all the condition checks.
For the second issue, frankley speaking it does not hurt when kernel thread
exits with TASK_INTERRUPTIBLE state, but this warning message scares users,
makes them feel there might be something risky with bcache and hurt their
data. Setting task state to TASK_RUNNING before returning fixes this
problem.
In alloc.c:allocator_wait(), there is also a similar issue, and is also
fixed in this patch.
Changelog:
v3: merge two similar fixes into one patch
v2: fix the race issue in v1 patch.
v1: initial buggy fix.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After long time small writing I/O running, we found the occupancy of CPU
is very high and I/O performance has been reduced by about half:
[root@ceph151 internal]# top
top - 15:51:05 up 1 day,2:43, 4 users, load average: 16.89, 15.15, 16.53
Tasks: 2063 total, 4 running, 2059 sleeping, 0 stopped, 0 zombie
%Cpu(s):4.3 us, 17.1 sy 0.0 ni, 66.1 id, 12.0 wa, 0.0 hi, 0.5 si, 0.0 st
KiB Mem : 65450044 total, 24586420 free, 38909008 used, 1954616 buff/cache
KiB Swap: 65667068 total, 65667068 free, 0 used. 25136812 avail Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2023 root 20 0 0 0 0 S 55.1 0.0 0:04.42 kworker/11:191
14126 root 20 0 0 0 0 S 42.9 0.0 0:08.72 kworker/10:3
9292 root 20 0 0 0 0 S 30.4 0.0 1:10.99 kworker/6:1
8553 ceph 20 0 4242492 1.805g 18804 S 30.0 2.9 410:07.04 ceph-osd
12287 root 20 0 0 0 0 S 26.7 0.0 0:28.13 kworker/7:85
31019 root 20 0 0 0 0 S 26.1 0.0 1:30.79 kworker/22:1
1787 root 20 0 0 0 0 R 25.7 0.0 5:18.45 kworker/8:7
32169 root 20 0 0 0 0 S 14.5 0.0 1:01.92 kworker/23:1
21476 root 20 0 0 0 0 S 13.9 0.0 0:05.09 kworker/1:54
2204 root 20 0 0 0 0 S 12.5 0.0 1:25.17 kworker/9:10
16994 root 20 0 0 0 0 S 12.2 0.0 0:06.27 kworker/5:106
15714 root 20 0 0 0 0 R 10.9 0.0 0:01.85 kworker/19:2
9661 ceph 20 0 4246876 1.731g 18800 S 10.6 2.8 403:00.80 ceph-osd
11460 ceph 20 0 4164692 2.206g 18876 S 10.6 3.5 360:27.19 ceph-osd
9960 root 20 0 0 0 0 S 10.2 0.0 0:02.75 kworker/2:139
11699 ceph 20 0 4169244 1.920g 18920 S 10.2 3.1 355:23.67 ceph-osd
6843 ceph 20 0 4197632 1.810g 18900 S 9.6 2.9 380:08.30 ceph-osd
The kernel work consumed a lot of CPU, and I found they are running journal
work, The journal is reclaiming source and flush btree node with surprising
frequency.
Through further analysis, we found that in btree_flush_write(), we try to
get a btree node with the smallest fifo idex to flush by traverse all the
btree nodein c->bucket_hash, after we getting it, since no locker protects
it, this btree node may have been written to cache device by other works,
and if this occurred, we retry to traverse in c->bucket_hash and get
another btree node. When the problem occurrd, the retry times is very high,
and we consume a lot of CPU in looking for a appropriate btree node.
In this patch, we try to record 128 btree nodes with the smallest fifo idex
in heap, and pop one by one when we need to flush btree node. It greatly
reduces the time for the loop to find the appropriate BTREE node, and also
reduce the occupancy of CPU.
[note by mpl: this triggers a checkpatch error because of adjacent,
pre-existing style violations]
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sometimes, Journal takes up a lot of CPU, we need statistics
to know what's the journal is doing. So this patch provide
some journal statistics:
1) reclaim: how many times the journal try to reclaim resource,
usually the journal bucket or/and the pin are exhausted.
2) flush_write: how many times the journal try to flush btree node
to cache device, usually the journal bucket are exhausted.
3) retry_flush_write: how many times the journal retry to flush
the next btree node, usually the previous tree node have been
flushed by other thread.
we show these statistic by sysfs interface. Through these statistics
We can totally see the status of journal module when the CPU is too
high.
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qeDb
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180204' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"Most of this is fixes and not new code/features:
- skd fix from Arnd, fixing a build error dependent on sla allocator
type.
- blk-mq scheduler discard merging fixes, one from me and one from
Keith. This fixes a segment miscalculation for blk-mq-sched, where
we mistakenly think two segments are physically contigious even
though the request isn't carrying real data. Also fixes a bio-to-rq
merge case.
- Don't re-set a bit on the buffer_head flags, if it's already set.
This can cause scalability concerns on bigger machines and
workloads. From Kemi Wang.
- Add BLK_STS_DEV_RESOURCE return value to blk-mq, allowing us to
distuingish between a local (device related) resource starvation
and a global one. The latter might happen without IO being in
flight, so it has to be handled a bit differently. From Ming"
* tag 'for-linus-20180204' of git://git.kernel.dk/linux-block:
block: skd: fix incorrect linux/slab_def.h inclusion
buffer: Avoid setting buffer bits that are already set
blk-mq-sched: Enable merging discard bio into request
blk-mq: fix discard merge with scheduler attached
blk-mq: introduce BLK_STS_DEV_RESOURCE
walk; this is critical to allow forward progress without the need to
use the bioset's BIOSET_NEED_RESCUER.
- Remove DM core's BIOSET_NEED_RESCUER based dm_offload infrastructure.
- DM core cleanups and improvements to make bio-based DM more efficient
(e.g. reduced memory footprint as well leveraging per-bio-data more).
- Introduce new bio-based mode (DM_TYPE_NVME_BIO_BASED) that leverages
the more direct IO submission path in the block layer; this mode is
used by DM multipath and also optimizes targets like DM thin-pool that
stack directly on NVMe data device.
- DM multipath improvements to factor out legacy SCSI-only
(e.g. scsi_dh) code paths to allow for more optimized support for NVMe
multipath.
- A fix for DM multipath path selectors (service-time and queue-length)
to select paths in a more balanced way; largely academic but doesn't
hurt.
- Numerous DM raid target fixes and improvements.
- Add a new DM "unstriped" target that enables Intel to workaround
firmware limitations in some NVMe drives that are striped internally
(this target also works when stacked above the DM "striped" target).
- Various Documentation fixes and improvements.
- Misc. cleanups and fixes across various DM infrastructure and targets
(e.g. bufio, flakey, log-writes, snapshot).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJacgwPAAoJEMUj8QotnQNaEw0H/0XRTcg8/lRuGl46kdeI3PgR
ZxUy4XgUrCLiACWO5yCU/nKipB32+3xTlTDTBcjmaBfX8HolH147Pasb1KdHqLVC
dOWLMpjlFztb5fnuOMitJA05qQAbgRlZ52QdVk/FDo9yWicgWjQZduh8aYX53pHw
6XOYWzSFAXQcaduPdz6TLiPw479xBwIpXxQbrO09f4qt3Ub4bqknEhzFXc+6M7zl
ejmW/bG2Qg6WmsfAuaAhFTV0LpTPSEzvaq9TfR7yqFU3DvDIAi7Yh8eQinIUDo4u
txpOGoESRAMPAMKH0/UJdr/u7jTsfgJox4QEavWfnViPvkouah5KdjVOL1veZ5U=
=R3dN
-----END PGP SIGNATURE-----
Merge tag 'for-4.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- DM core fixes to ensure that bio submission follows a depth-first
tree walk; this is critical to allow forward progress without the
need to use the bioset's BIOSET_NEED_RESCUER.
- Remove DM core's BIOSET_NEED_RESCUER based dm_offload infrastructure.
- DM core cleanups and improvements to make bio-based DM more efficient
(e.g. reduced memory footprint as well leveraging per-bio-data more).
- Introduce new bio-based mode (DM_TYPE_NVME_BIO_BASED) that leverages
the more direct IO submission path in the block layer; this mode is
used by DM multipath and also optimizes targets like DM thin-pool
that stack directly on NVMe data device.
- DM multipath improvements to factor out legacy SCSI-only (e.g.
scsi_dh) code paths to allow for more optimized support for NVMe
multipath.
- A fix for DM multipath path selectors (service-time and queue-length)
to select paths in a more balanced way; largely academic but doesn't
hurt.
- Numerous DM raid target fixes and improvements.
- Add a new DM "unstriped" target that enables Intel to workaround
firmware limitations in some NVMe drives that are striped internally
(this target also works when stacked above the DM "striped" target).
- Various Documentation fixes and improvements.
- Misc cleanups and fixes across various DM infrastructure and targets
(e.g. bufio, flakey, log-writes, snapshot).
* tag 'for-4.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (69 commits)
dm cache: Documentation: update default migration_throttling value
dm mpath selector: more evenly distribute ties
dm unstripe: fix target length versus number of stripes size check
dm thin: fix trailing semicolon in __remap_and_issue_shared_cell
dm table: fix NVMe bio-based dm_table_determine_type() validation
dm: various cleanups to md->queue initialization code
dm mpath: delay the retry of a request if the target responded as busy
dm mpath: return DM_MAPIO_DELAY_REQUEUE if QUEUE_IO or PG_INIT_REQUIRED
dm mpath: return DM_MAPIO_REQUEUE on blk-mq rq allocation failure
dm log writes: fix max length used for kstrndup
dm: backfill missing calls to mutex_destroy()
dm snapshot: use mutex instead of rw_semaphore
dm flakey: check for null arg_name in parse_features()
dm thin: extend thinpool status format string with omitted fields
dm thin: fixes in thin-provisioning.txt
dm thin: document representation of <highest mapped sector> when there is none
dm thin: fix documentation relative to low water mark threshold
dm cache: be consistent in specifying sectors and SI units in cache.txt
dm cache: delete obsoleted paragraph in cache.txt
dm cache: fix grammar in cache-policies.txt
...
Pull MD updates from Shaohua Li:
"Some small fixes for MD:
- fix raid5-cache potential problems if raid5 cache isn't fully
recovered
- fix a wait-within-wait warning in raid1/10
- make raid5-PPL support disks with writeback cache enabled"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
raid5-ppl: PPL support for disks with write-back cache enabled
md/r5cache: print more info of log recovery
md/raid1,raid10: silence warning about wait-within-wait
md: introduce new personality funciton start()
This status is returned from driver to block layer if device related
resource is unavailable, but driver can guarantee that IO dispatch
will be triggered in future when the resource is available.
Convert some drivers to return BLK_STS_DEV_RESOURCE. Also, if driver
returns BLK_STS_RESOURCE and SCHED_RESTART is set, rerun queue after
a delay (BLK_MQ_DELAY_QUEUE) to avoid IO stalls. BLK_MQ_DELAY_QUEUE is
3 ms because both scsi-mq and nvmefc are using that magic value.
If a driver can make sure there is in-flight IO, it is safe to return
BLK_STS_DEV_RESOURCE because:
1) If all in-flight IOs complete before examining SCHED_RESTART in
blk_mq_dispatch_rq_list(), SCHED_RESTART must be cleared, so queue
is run immediately in this case by blk_mq_dispatch_rq_list();
2) if there is any in-flight IO after/when examining SCHED_RESTART
in blk_mq_dispatch_rq_list():
- if SCHED_RESTART isn't set, queue is run immediately as handled in 1)
- otherwise, this request will be dispatched after any in-flight IO is
completed via blk_mq_sched_restart()
3) if SCHED_RESTART is set concurently in context because of
BLK_STS_RESOURCE, blk_mq_delay_run_hw_queue() will cover the above two
cases and make sure IO hang can be avoided.
One invariant is that queue will be rerun if SCHED_RESTART is set.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
Pull block updates from Jens Axboe:
"This is the main pull request for block IO related changes for the
4.16 kernel. Nothing major in this pull request, but a good amount of
improvements and fixes all over the map. This contains:
- BFQ improvements, fixes, and cleanups from Angelo, Chiara, and
Paolo.
- Support for SMR zones for deadline and mq-deadline from Damien and
Christoph.
- Set of fixes for bcache by way of Michael Lyle, including fixes
from himself, Kent, Rui, Tang, and Coly.
- Series from Matias for lightnvm with fixes from Hans Holmberg,
Javier, and Matias. Mostly centered around pblk, and the removing
rrpc 1.2 in preparation for supporting 2.0.
- A couple of NVMe pull requests from Christoph. Nothing major in
here, just fixes and cleanups, and support for command tracing from
Johannes.
- Support for blk-throttle for tracking reads and writes separately.
From Joseph Qi. A few cleanups/fixes also for blk-throttle from
Weiping.
- Series from Mike Snitzer that enables dm to register its queue more
logically, something that's alwways been problematic on dm since
it's a stacked device.
- Series from Ming cleaning up some of the bio accessor use, in
preparation for supporting multipage bvecs.
- Various fixes from Ming closing up holes around queue mapping and
quiescing.
- BSD partition fix from Richard Narron, fixing a problem where we
can't mount newer (10/11) FreeBSD partitions.
- Series from Tejun reworking blk-mq timeout handling. The previous
scheme relied on atomic bits, but it had races where we would think
a request had timed out if it to reused at the wrong time.
- null_blk now supports faking timeouts, to enable us to better
exercise and test that functionality separately. From me.
- Kill the separate atomic poll bit in the request struct. After
this, we don't use the atomic bits on blk-mq anymore at all. From
me.
- sgl_alloc/free helpers from Bart.
- Heavily contended tag case scalability improvement from me.
- Various little fixes and cleanups from Arnd, Bart, Corentin,
Douglas, Eryu, Goldwyn, and myself"
* 'for-4.16/block' of git://git.kernel.dk/linux-block: (186 commits)
block: remove smart1,2.h
nvme: add tracepoint for nvme_complete_rq
nvme: add tracepoint for nvme_setup_cmd
nvme-pci: introduce RECONNECTING state to mark initializing procedure
nvme-rdma: remove redundant boolean for inline_data
nvme: don't free uuid pointer before printing it
nvme-pci: Suspend queues after deleting them
bsg: use pr_debug instead of hand crafted macros
blk-mq-debugfs: don't allow write on attributes with seq_operations set
nvme-pci: Fix queue double allocations
block: Set BIO_TRACE_COMPLETION on new bio during split
blk-throttle: use queue_is_rq_based
block: Remove kblockd_schedule_delayed_work{,_on}()
blk-mq: Avoid that blk_mq_delay_run_hw_queue() introduces unintended delays
blk-mq: Rename blk_mq_request_direct_issue() into blk_mq_request_issue_directly()
lib/scatterlist: Fix chaining support in sgl_alloc_order()
blk-throttle: track read and write request individually
block: add bdev_read_only() checks to common helpers
block: fail op_is_write() requests to read-only partitions
blk-throttle: export io_serviced_recursive, io_service_bytes_recursive
...
Move the last used path to the end of the list (least preferred) so that
ties are more evenly distributed.
For example, in case with three paths with one that is slower than
others, the remaining two would be unevenly used if they tie. This is
due to the rotation not being a truely fair distribution.
Illustrated: paths a, b, c, 'c' has 1 outstanding IO, a and b are 'tied'
Three possible rotations:
(a, b, c) -> best path 'a'
(b, c, a) -> best path 'b'
(c, a, b) -> best path 'a'
(a, b, c) -> best path 'a'
(b, c, a) -> best path 'b'
(c, a, b) -> best path 'a'
...
So 'a' is used 2x more than 'b', although they should be used evenly.
With this change, the most recently used path is always the least
preferred, removing this bias resulting in even distribution.
(a, b, c) -> best path 'a'
(b, c, a) -> best path 'b'
(c, a, b) -> best path 'a'
(c, b, a) -> best path 'b'
...
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Since the unstripe target takes a target length which is the
size of *one* striped member we're trying to expose, not the
total size of *all* the striped members, the check does not
make sense and fails for some striped setups.
For example, say we have a 4TB striped device:
or 3907018496 sectors per underlying device:
if (sector_div(width, uc->stripes)) :
3907018496 / 2(num stripes) == 1953509248
tmp_len = width;
if (sector_div(tmp_len, uc->chunk_size)) :
1953509248 / 256(chunk size) == 7630895.5
(fails)
Fix this by removing the first check which isn't valid for unstriping.
Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The 'verify_rq_based:' code in dm_table_determine_type() was checking
all devices in the DM table rather than only checking the data devices.
Fix this by using the immutable target's iterate_devices method.
Also, tweak the block of dm_table_determine_type() code that decides
whether to upgrade from DM_TYPE_BIO_BASED to DM_TYPE_NVME_BIO_BASED so
that it makes sure the immutable_target doesn't support require
splitting IOs.
These changes have been verified to allow a "thin-pool" target whose
data device is an NVMe device to be upgraded to DM_TYPE_NVME_BIO_BASED.
Using the thin-pool in NVMe bio-based mode was verified to pass all the
device-mapper-test-suite's "thin-provisioning" tests.
Also verified that request-based DM multipath (with queue_mode "rq" and
"mq") works as expected using the 'mptest' harness.
Fixes: 22c11858e ("dm: introduce DM_TYPE_NVME_BIO_BASED")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add DM_ENDIO_DELAY_REQUEUE to allow request-based multipath's
multipath_end_io() to instruct dm-rq.c:dm_done() to delay a requeue.
This is beneficial to do if BLK_STS_RESOURCE is returned from the target
(because target is busy).
Relative to blk-mq: kick the hw queues via blk_mq_requeue_work(),
indirectly from dm-rq.c:__dm_mq_kick_requeue_list(), after a delay.
For old .request_fn: use blk_delay_queue().
bio-based multipath doesn't have feature parity with request-based for
retryable error requeues; that is something that'll need fixing in the
future.
Suggested-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Bart Van Assche <bart.vanassche@wdc.com>
[as interpreted from Bart's "... patch looks fine to me."]
blk_insert_cloned_request() is called in the fast path of a dm-rq driver
(e.g. blk-mq request-based DM mpath). blk_insert_cloned_request() uses
blk_mq_request_bypass_insert() to directly append the request to the
blk-mq hctx->dispatch_list of the underlying queue.
1) This way isn't efficient enough because the hctx spinlock is always
used.
2) With blk_insert_cloned_request(), we completely bypass underlying
queue's elevator and depend on the upper-level dm-rq driver's elevator
to schedule IO. But dm-rq currently can't get the underlying queue's
dispatch feedback at all. Without knowing whether a request was issued
or not (e.g. due to underlying queue being busy) the dm-rq elevator will
not be able to provide effective IO merging (as a side-effect of dm-rq
currently blindly destaging a request from its elevator only to requeue
it after a delay, which kills any opportunity for merging). This
obviously causes very bad sequential IO performance.
Fix this by updating blk_insert_cloned_request() to use
blk_mq_request_direct_issue(). blk_mq_request_direct_issue() allows a
request to be issued directly to the underlying queue and returns the
dispatch feedback (blk_status_t). If blk_mq_request_direct_issue()
returns BLK_SYS_RESOURCE the dm-rq driver will now use DM_MAPIO_REQUEUE
to _not_ destage the request. Whereby preserving the opportunity to
merge IO.
With this, request-based DM's blk-mq sequential IO performance is vastly
improved (as much as 3X in mpath/virtio-scsi testing).
Signed-off-by: Ming Lei <ming.lei@redhat.com>
[blk-mq.c changes heavily influenced by Ming Lei's initial solution, but
they were refactored to make them less fragile and easier to read/review]
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Avoid using DM_MAPIO_REQUEUE unless absolutely necessary because it
results in dm-rq.c:dm_mq_queue_rq() returning BLK_STS_RESOURCE to
blk-mq -- doing so should only ever be done if the underlying queue is
out of resources. So switch to returning DM_MAPIO_DELAY_REQUEUE from
multipath_clone_and_map() if either MPATHF_QUEUE_IO or
MPATHF_PG_INIT_REQUIRED are set.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
blk-mq will rerun queue via RESTART or dispatch wake after one request
is completed, so not necessary to wait random time for requeuing, we
should trust blk-mq to do it.
More importantly, we need to return BLK_STS_RESOURCE to blk-mq so that
dequeuing from the I/O scheduler can be stopped, this results in
improved I/O merging.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If source string is longer than max, kstrndup will allocate max+1
space. So make sure the result will not exceed max.
Signed-off-by: Ma Shimiao <mashimiao.fnst@cn.fujitsu.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The rw_semaphore is acquired for read only in two places, neither is
performance-critical. So replace it with a mutex -- which is more
efficient.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
One can crash dm-flakey by specifying more feature arguments than the
number of features supplied. Checking for null in arg_name avoids
this.
dmsetup create flakey-test --table "0 66076080 flakey /dev/sdb9 0 0 180 2 drop_writes"
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If anyone is going to use dm_table_create(), they probably should be
able to use dm_table_destroy() too. Move the dm_table_destroy()
definition outside the private header, near dm_table_create()
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fixes the following sparse warning:
drivers/md/dm-raid.c:33:1: warning:
symbol 'raid_sets' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm_bufio_client_create() does not check result of register_shrinker()
which was tagged as __must_check recently, reported by sparse.
Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The client's mutex needs to be destroyed in dm_bufio_client_destroy() as
well as the dm_bufio_client_create() error path.
Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Use REQ_OP_READ and REQ_OP_WRITE macros instead of READ and WRITE. They
have the same value, but the block layer uses REQ_OP so bufio should
too.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This device mapper "unstriped" target remaps and unstripes I/O so it
is issued solely on a single drive in a HW RAID0 or dm-striped target.
In a 4 drive HW RAID0 the striped target exposes 1/4th of the LBA range
as a virtual drive. Each I/O to that virtual drive will only be issued
to the 1 drive that was selected of the 4 drives in the HW RAID0.
This unstriped target is most useful for Intel NVMe drives that have
multiple cores but that do not have firmware control to pin separate LBA
ranges to each discrete cpu core.
Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fix to return error code -ENOMEM from the mempool_create_kmalloc_pool()
error handling case instead of 0, as done elsewhere in this function.
Fixes: ef43aa3806 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)")
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Loading key via kernel keyring service erases the internal
key copy immediately after we pass it in crypto layer. This is
wrong because IV is initialized later and we use wrong key
for the initialization (instead of real key there's just zeroed
block).
The bug may cause data corruption if key is loaded via kernel keyring
service first and later same crypt device is reactivated using exactly
same key in hexbyte representation, or vice versa. The bug (and fix)
affects only ciphers using following IVs: essiv, lmk and tcw.
Fixes: c538f6ec9f ("dm crypt: add ability to use keys from the kernel key retention service")
Cc: stable@vger.kernel.org # 4.10+
Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Reviewed-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Some asynchronous cipher implementations may use DMA. The stack may
be mapped in the vmalloc area that doesn't support DMA. Therefore,
the cipher request and initialization vector shouldn't be on the
stack.
Fix this by allocating the request and iv with kmalloc.
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If dm-crypt uses authenticated mode with separate MAC, there are two
concatenated part of the key structure - key(s) for encryption and
authentication key.
Add a missing check for authenticated key length. If this key length is
smaller than actually provided key, dm-crypt now properly fails instead
of crashing.
Fixes: ef43aa3806 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)")
Cc: stable@vger.kernel.org # 4.12+
Reported-by: Salah Coronya <salahx@yahoo.com>
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When inserting a new key/value pair into a btree we walk down the spine of
btree nodes performing the following 2 operations:
i) space for a new entry
ii) adjusting the first key entry if the new key is lower than any in the node.
If the _root_ node is full, the function btree_split_beneath() allocates 2 new
nodes, and redistibutes the root nodes entries between them. The root node is
left with 2 entries corresponding to the 2 new nodes.
btree_split_beneath() then adjusts the spine to point to one of the two new
children. This means the first key is never adjusted if the new key was lower,
ie. operation (ii) gets missed out. This can result in the new key being
'lost' for a period; until another low valued key is inserted that will uncover
it.
This is a serious bug, and quite hard to make trigger in normal use. A
reproducing test case ("thin create devices-in-reverse-order") is
available as part of the thin-provision-tools project:
https://github.com/jthornber/thin-provisioning-tools/blob/master/functional-tests/device-mapper/dm-tests.scm#L593
Fix the issue by changing btree_split_beneath() so it no longer adjusts
the spine. Instead it unlocks both the new nodes, and lets the main
loop in btree_insert_raw() relock the appropriate one and make any
neccessary adjustments.
Cc: stable@vger.kernel.org
Reported-by: Monty Pavel <monty_pavel@sina.com>
Signed-off-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
For btree removal, there is a corner case that a single thread
could takes 6 locks which is more than THIN_MAX_CONCURRENT_LOCKS(5)
and leads to deadlock.
A btree removal might eventually call
rebalance_children()->rebalance3() to rebalance entries of three
neighbor child nodes when shadow_spine has already acquired two
write locks. In rebalance3(), it tries to shadow and acquire the
write locks of all three child nodes. However, shadowing a child
node requires acquiring a read lock of the original child node and
a write lock of the new block. Although the read lock will be
released after block shadowing, shadowing the third child node
in rebalance3() could still take the sixth lock.
(2 write locks for shadow_spine +
2 write locks for the first two child nodes's shadow +
1 write lock for the last child node's shadow +
1 read lock for the last child node)
Cc: stable@vger.kernel.org
Signed-off-by: Dennis Yang <dennisyang@qnap.com>
Acked-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
In order to provide data consistency with PPL for disks with write-back
cache enabled all data has to be flushed to disks before next PPL
entry. The disks to be flushed are marked in the bitmap. It's modified
under a mutex and it's only read after PPL io unit is submitted.
A limitation of 64 disks in the array has been introduced to keep data
structures and implementation simple. RAID5 arrays with so many disks are
not likely due to high risk of multiple disks failure. Such restriction
should not be a real life limitation.
With write-back cache disabled next PPL entry is submitted when data write
for current one completes. Data flush defers next log submission so trigger
it when there are no stripes for handling found.
As PPL assures all data is flushed to disk at request completion, just
acknowledge flush request when PPL is enabled.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
DM is no longer prone to having its request_queue be improperly
initialized.
Summary of changes:
- defer DM's blk_register_queue() from add_disk()-time until
dm_setup_md_queue() by using add_disk_no_queue_reg() in alloc_dev().
- dm_setup_md_queue() is updated to fully initialize DM's request_queue
(_after_ all table loads have occurred and the request_queue's type,
features and limits are known).
A very welcome side-effect of these changes is DM no longer needs to:
1) backfill the "mq" sysfs entry (because historically DM didn't
initialize the request_queue to use blk-mq until _after_
blk_register_queue() was called via add_disk()).
2) call elv_register_queue() to get .request_fn request-based DM
device's "iosched" exposed in syfs.
In addition, blk-mq debugfs support is now made available because
request-based DM's blk-mq request_queue is now properly initialized
before dm_setup_md_queue() calls blk_register_queue().
These changes also stave off the need to introduce new DM-specific
workarounds in block core, e.g. this proposal:
https://patchwork.kernel.org/patch/10067961/
In the end DM devices should be less unicorn in nature (relative to
initialization and availability of block core infrastructure provided by
the request_queue).
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Uses common code for determining if an error should be retried on
alternate path.
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Otherwise, architectures that do negated adds of atomics (e.g. s390)
to do atomic_sub fail in closure_set_stopped.
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bcache needs to scale the dirty data in the cache over the multiple
backing disks in order to calculate writeback rates for each.
The previous code did this by multiplying the target number of dirty
sectors by the backing device size, and expected it to fit into a
uint64_t; this blows up on relatively small backing devices.
The new approach figures out the bdev's share in 16384ths of the overall
cached data. This is chosen to cope well when bdevs drastically vary in
size and to ensure that bcache can cross the petabyte boundary for each
backing device.
This has been improved based on Tang Junhui's feedback to ensure that
every device gets a share of dirty data, no matter how small it is
compared to the total backing pool.
The existing mechanism is very limited; this is purely a bug fix to
remove limits on volume size. However, there still needs to be change
to make this "fair" over many volumes where some are idle.
Reported-by: Jack Douglas <jack@douglastechnology.co.uk>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bcache only does recoverable I/O for read operations by calling
cached_dev_read_error(). For write opertions there is no I/O recovery for
failed requests.
But in bch_count_io_errors() no matter read or write I/Os, before errors
counter reaches io error limit, pr_err() always prints "IO error on %,
recoverying". For write requests this information is misleading, because
there is no I/O recovery at all.
This patch adds a parameter 'is_read' to bch_count_io_errors(), and only
prints "recovering" by pr_err() when the bio direction is READ.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Member devices of struct cache_set is used to reference all attached
bcache devices to this cache set. If it is treated as array of pointers,
size of devices[] is indicated by member nr_uuids of struct cache_set.
nr_uuids is calculated in drivers/md/super.c:bch_cache_set_alloc(),
bucket_bytes(c) / sizeof(struct uuid_entry)
Bucket size is determined by user space tool "make-bcache", by default it
is 1024 sectors (defined in bcache-tools/make-bcache.c:main()). So default
nr_uuids value is 4096 from the above calculation.
Every time when bcache code iterates bcache devices of a cache set, all
the 4096 pointers are checked even only 1 bcache device is attached to the
cache set, that's a wast of time and unncessary.
This patch adds a member devices_max_used to struct cache_set. Its value
is 1 + the maximum used index of devices[] in a cache set. When iterating
all valid bcache devices of a cache set, use c->devices_max_used in
for-loop may reduce a lot of useless checking.
Personally, my motivation of this patch is not for performance, I use it
in bcache debugging, which helps me to narrow down the scape to check
valid bcached devices of a cache set.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function cached_dev_make_request() and flash_dev_make_request() call
generic_start_io_acct() with (struct bcache_device)->disk when they start a
closure. Then the function bio_complete() calls generic_end_io_acct() with
(struct search)->orig_bio->bi_disk when the closure has done.
Since the `bi_disk` is not the bcache device, the generic_end_io_acct() is
called with a wrong device queue.
It causes the "inflight" (in struct hd_struct) counter keep increasing
without decreasing.
This patch fix the problem by calling generic_end_io_acct() with
(struct bcache_device)->disk.
Signed-off-by: Zhai Zhaoxuan <kxuanobj@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[edit by mlyle: include sched/debug.h to get __sched]
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Eliminates cases where sync can race and fail to complete / get stuck.
Removes many status flags and simplifies entering-and-exiting closure
sleeping behaviors.
[mlyle: fixed conflicts due to changed return behavior in mainline.
extended commit comment, and squashed down two commits that were mostly
contradictory to get to this state. Changed __set_current_state to
set_current_state per Jens review comment]
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the control system would wait for at least half a second, and there's
been no reqs hitting the backing disk for awhile: use an alternate mode
where we have at most one contiguous set of writebacks in flight at a
time. (But don't otherwise delay). If front-end IO appears, it will
still be quick, as it will only have to contend with one real operation
in flight. But otherwise, we'll be sending data to the backing disk as
quickly as it can accept it (with one op at a time).
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Writeback keys are presently iterated and dispatched for writeback in
order of the logical block address on the backing device. Multiple may
be, in parallel, read from the cache device and then written back
(especially when there are contiguous I/O).
However-- there was no guarantee with the existing code that the writes
would be issued in LBA order, as the reads from the cache device are
often re-ordered. In turn, when writing back quickly, the backing disk
often has to seek backwards-- this slows writeback and increases
utilization.
This patch introduces an ordering mechanism that guarantees that the
original order of issue is maintained for the write portion of the I/O.
Performance for writeback is significantly improved when there are
multiple contiguous keys or high writeback rates.
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Tested-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
in bch_debug_init(), ret is always 0, and the return value is useless,
change it to return 0 if be success after calling debugfs_create_dir(),
else return a non-zero value.
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In such scenario that there are some flash only volumes
, and some cached devices, when many tasks request these devices in
writeback mode, the write IOs may fall to the same bucket as bellow:
| cached data | flash data | cached data | cached data| flash data|
then after writeback of these cached devices, the bucket would
be like bellow bucket:
| free | flash data | free | free | flash data |
So, there are many free space in this bucket, but since data of flash
only volumes still exists, so this bucket cannot be reclaimable,
which would cause waste of bucket space.
In this patch, we segregate flash only volume write streams from
cached devices, so data from flash only volumes and cached devices
can store in different buckets.
Compare to v1 patch, this patch do not add a additionally open bucket
list, and it is try best to segregate flash only volume write streams
from cached devices, sectors of flash only volumes may still be mixed
with dirty sectors of cached device, but the number is very small.
[mlyle: fixed commit log formatting, permissions, line endings]
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix ptr_ret.cocci warnings:
drivers/md/bcache/btree.c:1800:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, when a cached device detaching from cache, writeback thread is
not stopped, and writeback_rate_update work is not canceled. For example,
after the following command:
echo 1 >/sys/block/sdb/bcache/detach
you can still see the writeback thread. Then you attach the device to the
cache again, bcache will create another writeback thread, for example,
after below command:
echo ba0fb5cd-658a-4533-9806-6ce166d883b9 > /sys/block/sdb/bcache/attach
then you will see 2 writeback threads.
This patch stops writeback thread and cancels writeback_rate_update work
when cached device detaching from cache.
Compare with patch v1, this v2 patch moves code down into the register
lock for safety in case of any future changes as Coly and Mike suggested.
[edit by mlyle: commit log spelling/formatting]
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The read request might meet error when searching the btree, but the error
was not handled in cache_lookup(), and this kind of metadata failure will
not go into cached_dev_read_error(), finally, the upper layer will receive
bi_status=0. In this patch we judge the metadata error by the return
value of bch_btree_map_keys(), there are two potential paths give rise to
the error:
1. Because the btree is not totally cached in memery, we maybe get error
when read btree node from cache device (see bch_btree_node_get()), the
likely errno is -EIO, -ENOMEM
2. When read miss happens, bch_btree_insert_check_key() will be called to
insert a "replace_key" to btree(see cached_dev_cache_miss(), just for
doing preparatory work before insert the missed data to cache device),
a failure can also happen in this situation, the likely errno is
-ENOMEM
bch_btree_map_keys() will return MAP_DONE in normal scenario, but we will
get either -EIO or -ENOMEM in above two cases. if this happened, we should
NOT recover data from backing device (when cache device is dirty) because
we don't know whether bkeys the read request covered are all clean. And
after that happened, s->iop.status is still its initially value(0) before
we submit s->bio.bio, we set it to BLK_STS_IOERR, so it can go into
cached_dev_read_error(), and finally it can be passed to upper layer, or
recovered by reread from backing device.
[edit by mlyle: patch formatting, word-wrap, comment spelling,
commit log format]
Signed-off-by: Hua Rui <huarui.dev@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Trying to do both SCSI and NVMe bio-based handling with branching in the
same common code has proven too tedious on a code maintenance level. In
addition it slightly hurts IO performance.
Fix this by factoring out __map_bio() and __map_bio_nvme().
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
All code that deals with pg_init is not used with bio-based NVMe mode.
This includes skipping initialization of pg_init related variables.
Also, pg_init related members on 'struct multipath' have been grouped
together.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The bio is always freed after running crypt_free_buffer_pages(), so it
isn't necessary to clear bv->bv_page.
Cc: Mike Snitzer <snitzer@redhat.com>
Cc:dm-devel@redhat.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bcache is the only user of bio_alloc_pages(), so move this function into
bcache, and avoid it being misused in the future.
Also rename it to bch_bio_allo_pages() since it is bcache only.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All direct access to bvec table are safe even after multipage bvec is
supported.
Cc: linux-bcache@vger.kernel.org
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For BIO based DM, some targets aren't ready for dealing with bigger
incoming bio than 1Mbyte, such as crypt target.
Cc: Mike Snitzer <snitzer@redhat.com>
Cc:dm-devel@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch converts to bio_first_bvec_all() & bio_first_page_all() for
retrieving the 1st bvec/page, and prepares for supporting multipage bvec.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This DM multipath NVMe bio-based support requires CONFIG_NVME_MULTIPATH
to not be set. In the future hopefully NVMe multipath and DM multipath
can co-exist more seemlessly. But as is, if CONFIG_NVME_MULTIPATH=Y
then all the individal NVMe paths will remain hidden to upper layers and
as such DM multipath will not be able to manage them.
Though NVMe's native multipathing doesn't multipath namespaces across
subsystems; so technically a user _could_ use CONFIG_NVME_MULTIPATH=Y
and also use DM multipath to multipath across subsystems.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Moving the dm_bio_restore() to process_queued_bios() avoids doing that
work in multipath_end_io_bio().
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Log recovery is critical for raid5 journal/cache. Printing information
about each recovery by default will help the system admin monitor the
status of the array.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
All underlying members are initialized directly so the memset() calls
are not needed. Also, initialize mpio->nr_bytes from the start since it
never changes.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Upper level bio-based drivers that stack immediately ontop of NVMe can
leverage direct_make_request(). In addition DM's NVMe bio-based
will initially only ever have one NVMe device that it submits IO to at a
time. There is no splitting needed. Enhance DM core so that
DM_TYPE_NVME_BIO_BASED's IO submission takes advantage of both of these
characteristics.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If dm_table_determine_type() establishes DM_TYPE_NVME_BIO_BASED then
all devices in the DM table do not support partial completions. Also,
the table has a single immutable target that doesn't require DM core to
split bios.
This will enable adding NVMe optimizations to bio-based DM.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
No apparent need to generic_start_io_acct() until before the IO is ready
for submission. start_io_acct() is the proper place to do this
accounting -- it is also where DM accounts for pending IO and, if
enabled, starts dm-stats accounting.
Replace start_io_acct()'s part_round_stats() with generic_start_io_acct().
This eliminates needing to take part_stat_lock() multiple times when
starting an IO on bio-based devices.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Eliminates need for a separate mempool to allocate 'struct dm_io'
objects from. As such, it saves an extra mempool allocation for each
original bio that DM core is issued.
This complicates the per-bio-data accessor functions by needing to
conditonally add extra padding to get to a target's per-bio-data. But
in the end this provides a decent performance improvement for all
bio-based DM devices.
On an NVMe-loop based testbed to a ramdisk (~3100 MB/s): bio-based
DM linear performance improved by 2% (went from 2665 to 2777 MB/s).
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
These CRUD comments have worn out their welcome. The code is what it
is, over time it'll hopefully get better. But these comments serve no
purpose whatsoever.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
- Fix various targets to dm_register_target after module __init
resources created; otherwise racing lvm2 commands could result in a
NULL pointer during initialization of associated DM kernel module.
- Fix regression in bio-based DM multipath queue_if_no_path handling.
- Fix DM bufio's shrinker to reclaim more than one buffer per scan.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaNBomAAoJEMUj8QotnQNao5IH/0X0Auycfx2O8dkVoRhW1Q3x
NNt7m6aKhmdUsBYOug9/na5kNKqsRzKyPYSV9bM0Cy5mJzgxQYMeL5Tmu2qwGDOL
1C/HUhffmZJQ+lK5dS2wQ41Ep+lppm8KYofJ70Ueb+JQ9Uxmkp9GXGud0LrJ0QzR
9D5i/3jAlZuOnGLQ0+Q0E9wXa8sQdfrAbcPzz+4nG9aqGcz2T5lfbwg1K+Ym0U3r
0jBAHZWhamJQP1gW1+i0EWWtR68TgaWbHeTjrdvm2pUueAaywJzP9oeK++p3Op+9
A2JRE3I4ClAkUBjj480UAJW8Egg6zZ1mfOKta/CpqChbVqqjANi9lGSyRlkYMFg=
=oNN+
-----END PGP SIGNATURE-----
Merge tag 'for-4.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- fix a particularly nasty DM core bug in a 4.15 refcount_t conversion.
- fix various targets to dm_register_target after module __init
resources created; otherwise racing lvm2 commands could result in a
NULL pointer during initialization of associated DM kernel module.
- fix regression in bio-based DM multipath queue_if_no_path handling.
- fix DM bufio's shrinker to reclaim more than one buffer per scan.
* tag 'for-4.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm bufio: fix shrinker scans when (nr_to_scan < retain_target)
dm mpath: fix bio-based multipath queue_if_no_path handling
dm: fix various targets to dm_register_target after module __init resources created
dm table: fix regression from improper dm_dev_internal.count refcount_t conversion
__send_changing_extent_only() must follow the same pattern that was
established with commit "dm: ensure bio submission follows a depth-first
tree walk". That is: submit first bio up to split boundary and then
split the remainder to further submissions.
Suggested-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
alloc_multiple_bios() assumes it can allocate the requested number of
bios but until now there was no gaurantee that the mempools would be
accomodating.
Suggested-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Now that all of DM has been revised and/or verified to no longer require
the use of BIOSET_NEED_RESCUER the dm_offload code may be removed.
Suggested-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
DM targets can request multiple bios be sent to them by DM core (see:
num_{flush,discard,write_same,write_zeroes}_bios). But until now these
bios were allocated in an unsafe manner than could potentially exhaust
the DM device's bioset -- in the face of multiple threads each trying to
do multiple allocations from the same DM device's bioset.
Fix __send_duplicate_bios() by using the new alloc_multiple_bios(). The
allocation strategy used by alloc_multiple_bios() models that used by
dm-crypt.c:crypt_alloc_buffer().
Neil Brown initially proposed this fix but the implementation has been
revised enough that it inappropriate to attribute the entirety of it to
him.
Suggested-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
No DM target provides num_write_bios and none has since dm-cache's
brief use in 2013.
Having the possibility of num_write_bios > 1 complicates bio
allocation. So remove the interface and assume there is only one bio
needed.
If a target ever needs more, it must provide a suitable bioset and
allocate itself based on its particular needs.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
A dm device can, in general, represent a tree of targets, each of which
handles a sub-range of the range of blocks handled by the parent.
The bio sequencing managed by generic_make_request() requires that bios
are generated and handled in a depth-first manner. Each call to a
make_request_fn() may submit bios to a single member device, and may
submit bios for a reduced region of the same device as the
make_request_fn.
In particular, any bios submitted to member devices must be expected to
be processed in order, so a later one must never wait for an earlier
one.
This ordering is usually achieved by using bio_split() to reduce a bio
to a size that can be completely handled by one target, and resubmitting
the remainder to the originating device. bio_queue_split() shows the
canonical approach.
dm doesn't follow this approach, largely because it has needed to split
bios since long before bio_split() was available. It currently can
submit bios to separate targets within the one dm_make_request() call.
Dependencies between these targets, as can happen with dm-snap, can
cause deadlocks if either bios gets stuck behind the other in the queues
managed by generic_make_request(). This requires the 'rescue'
functionality provided by dm_offload_{start,end}.
Some of this requirement can be removed by changing the order of bio
submission to follow the canonical approach. That is, if dm finds that
it needs to split a bio, the remainder should be sent to
generic_make_request() rather than being handled immediately. This
delays the handling until the first part is completely processed, so the
deadlock problems do not occur.
__split_and_process_bio() can be called both from dm_make_request() and
from dm_wq_work(). When called from dm_wq_work() the current approach
is perfectly satisfactory as each bio will be processed immediately.
When called from dm_make_request(), current->bio_list will be non-NULL,
and in this case it is best to create a separate "clone" bio for the
remainder.
When we use bio_clone_bioset() to split off the front part of a bio
and chain the two together and submit the remainder to
generic_make_request(), it is important that the newly allocated
bio is used as the head to be processed immediately, and the original
bio gets "bio_advance()"d and sent to generic_make_request() as the
remainder. Otherwise, if the newly allocated bio is used as the
remainder, and if it then needs to be split again, then the next
bio_clone_bioset() call will be made while holding a reference a bio
(result of the first clone) from the same bioset. This can potentially
exhaust the bioset mempool and result in a memory allocation deadlock.
Note that there is no race caused by reassigning cio.io->bio after already
calling __map_bio(). This bio will only be dereferenced again after
dec_pending() has found io->io_count to be zero, and this cannot happen
before the dec_pending() call at the end of __split_and_process_bio().
To provide the clone bio when splitting, we use q->bio_split. This
was previously being freed by bio-based dm to avoid having excess
rescuer threads. As bio_split bio sets no longer create rescuer
threads, there is little cost and much gain from restoring the
q->bio_split bio set.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The BIOSET_NEED_RESCUER flag is only needed when a make_request_fn might
do two allocations from the one bioset, and the second one could block
until the first bio completes.
dm_io() is called from make_request_fn() context. The closest it comes
to multiple allocations is in chunk_io() in dm-snap-persistent. But
there the code uses a separate thread to avoid problems.
So BIOSET_NEED_RESCUER is not needed.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The BIOSET_NEED_RESCUER flag is only needed when a make_request_fn might
do two allocations from the one bioset, and the second one could block
until the first bio completes.
dm-crypt does allocate from this bioset inside the dm make_request_fn,
but does so using GFP_NOWAIT so that the allocation will not block.
So BIOSET_NEED_RESCUER is not needed.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Clarify that dm_accept_partial_bio isn't allowed for REQ_OP_ZONE_RESET
bios.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
No need to calculate the reshaping progress because
mddev->curr_resync_completed holds it.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
During reshape, 'A' chars were reported in status rather than 'a'.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
In order to avoid redoing synchronization/recovery/reshape partially,
the raid set got frozen until after all passed in table line flags had
been cleared. The related table reload sequence had to be precisely
followed, or reshaping may lead to data corruption caused by the active
mapping carrying on with a reshape when the inactive mapping already
had retrieved a stale reshape position.
Harden by retrieving the actual resync/recovery/reshape position
during resume whilst the active table is suspended thus avoiding
to keep the raid set frozen altogether. This prevents superfluous
redoing of an already resynchronized or recovered segment and,
most importantly, potential for redoing of an already reshaped
segment causing data corruption.
Fixes: d39f0010e ("dm raid: fix raid_resume() to keep raid set frozen as needed")
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Verifying the current raid sets redundancy based on retrieved
superblock content has to use the superblock's raid level (e.g. raid0),
not the constructor requested one (e.g. raid10).
Using the requested raid level of raid10 lead to a "divide error"
on raid0 which defines data copies divided by to be zero.
Also check for bogus data copies.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If you prepare_to_wait() after a previous prepare_to_wait(),
but before calling schedule(), you get warning:
do not call blocking ops when !TASK_RUNNING; state=2
This is appropriate as it is often a bug. The event that the
first prepare_to_wait() expects might wake up the schedule following
the second prepare_to_wait(), which could be confusing.
However if both prepare_to_wait()s are part of simple wait_event()
loops, and if the inner one is rarely called, then there is
no problem. The inner loop is too simple to get confused by
a stray wakeup, and the outer loop won't spin unduly because the
inner doesnt affect it often.
This pattern occurs in both raid1.c and raid10.c in the use of
flush_pending_writes().
The warning can be silenced by setting current->state to TASK_RUNNING.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
In do_md_run(), md threads should not wake up until the array is fully
initialized in md_run(). However, in raid5_run(), raid5-cache may wake
up mddev->thread to flush stripes that need to be written back. This
design doesn't break badly right now. But it could lead to bad bug in
the future.
This patch tries to resolve this problem by splitting start up work
into two personality functions, run() and start(). Tasks that do not
require the md threads should go into run(), while task that require
the md threads go into start().
r5l_load_log() is moved to raid5_start(), so it is not called until
the md threads are started in do_md_run().
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Move raid_resume()'s setting of 'rw' and 'in_sync' to just prior to
mddev_resume().
Also, remove unused 'bitmap_loaded' member from "struct raid_set".
No functional changes.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fix various sync state issues causing racy/bogus sync ratio,
sync_action ad health chars in dm_status() info output.
Sync ratio could be N/N (i.e. 100%) shortly after raid set
creation, i.e. creating a new RaidLV or upconverting a linear LV to
raid1 thus:
"0 2097152 raid raid1 2 Aa 2097162/2097152 recover 0 0 -"
instead of:
"0 2097152 raid raid1 2 Aa 0/2097152 idle 0 0 -"
Sync action could be non-idle, when the MD thread was done with io.
Health chars could be 'A' when they should be 'a' for a short time
before a resynchonization started.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The raid_status() function passes the bool array_in_sync variable around
providing synchronization state of the MD array. Replace it with a
runtime flag. This will avoid a pattern of having to pass discrete
variables to various functions.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The MD sync thread updates recovery flags providing state of any
running, idle, frozen, recovering, reshaping, ... activity it performs
and updates respective flags asynchronously versus dm processing
raid_status(). To close that race window, take a single copy of the
flags and pass it into its callees.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Mike Snitzer