This patch makes the I915_PARAM_HAS_EXEC_CONSTANTS getparam return 0
(indicating the optional feature is not supported), and makes execbuf
always return -EINVAL if the flags are used.
Apparently, no userspace ever shipped which used this optional feature:
I checked the git history of Mesa, xf86-video-intel, libva, and Beignet,
and there were zero commits showing a use of these flags. Kernel commit
72bfa19c8d apparently introduced the feature prematurely. According
to Chris, the intention was to use this in cairo-drm, but "the use was
broken for gen6", so I don't think it ever happened.
'relative_constants_mode' has always been tracked per-device, but this
has actually been wrong ever since hardware contexts were introduced, as
the INSTPM register is saved (and automatically restored) as part of the
render ring context. The software per-device value could therefore get
out of sync with the hardware per-context value. This meant that using
them is actually unsafe: a client which tried to use them could damage
the state of other clients, causing the GPU to interpret their BO
offsets as absolute pointers, leading to bogus memory reads.
These flags were also never ported to execlist mode, making them no-ops
on Gen9+ (which requires execlists), and Gen8 in the default mode.
On Gen8+, userspace can write these registers directly, achieving the
same effect. On Gen6-7.5, it likely makes sense to extend the command
parser to support them. I don't think anyone wants this on Gen4-5.
Based on a patch by Dave Gordon.
v3: Return -ENODEV for the getparam, as this is what we do for other
obsolete features. Suggested by Chris Wilson.
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92448
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215093446.21291-1-kenneth@whitecape.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
At least a ParadTech PS175 LSPCON chip/firmware uses long instead of
short pulses to signal output unplug/plug events. This is contrary to
how branch devices normally work which use short HPD signaling. This
chip will also switch to LS mode after an unplug event, which could be
the consequence of the long HPD signaling semantics and an effort to
save power automatically. Because of this we'll fail to do AUX and
detect the output after a replug event.
To fix this make sure we are in PCON mode during connector detection.
v2:
- Switch the mode in the proper spot.
Cc: raptorteak@gmail.com
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98912
Reported-and-tested-by: raptorteak@gmail.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487776252-6288-1-git-send-email-imre.deak@intel.com
Rather than sprinkling ideas of how big the DDI buf translation tables
are somewhere in intel_dp.c, let's concentrate it all in intel_ddi.c
where the actual tables are defined. To that end we introduce
intel_ddi_dp_voltage_max() which will actually look at the proper
translation table to determine what is the maximum voltage swing level
supported.
v2: Mask out the preemphasis bits from the return value of
intel_ddi_dp_voltage_max()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223174901.26749-1-ville.syrjala@linux.intel.com
Convert the big switch statement in translate_signal_level() into a neat
table. The table also serves as documentation for the translation
tables. We'll also have other uses for this table later on.
v2: Remove superfluous space (David)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223173507.17600-2-ville.syrjala@linux.intel.com
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Split the code to select the correct translation table into DP,
eDP and FDI specific helpers. This reduces the clutter in
intel_prepare_dp_ddi_buffers(), and we'll have other uses for some
of these new helper functions later on.
v2: Fix typo in commit message (David)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223173507.17600-1-ville.syrjala@linux.intel.com
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
If we cease making progress in finding matching outputs for a tiled
configuration, stop looping over the remaining unconfigured outputs.
v2: Use conn_seq (instead of pass) to only apply tile configuration on
first pass.
Fixes: b0ee9e7fa5 ("drm/fb: add support for tiled monitor configurations. (v2)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: <stable@vger.kernel.org> # v3.19+
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224114306.4400-1-chris@chris-wilson.co.uk
This warning is seen on 64-bit builds in functions:
'mipi_dbi_typec1_command':
'mipi_dbi_typec3_command_read':
'mipi_dbi_typec3_command':
>> drivers/gpu/drm/tinydrm/mipi-dbi.c:65:20: warning: field width specifier '*' expects argument of type 'int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=]
DRM_DEBUG_DRIVER("cmd=%02x, par=%*ph\n", cmd, len, data); \
^
include/drm/drmP.h:228:40: note: in definition of macro 'DRM_DEBUG_DRIVER'
drm_printk(KERN_DEBUG, DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
^~~
>> drivers/gpu/drm/tinydrm/mipi-dbi.c:671:2: note: in expansion of macro 'MIPI_DBI_DEBUG_COMMAND'
MIPI_DBI_DEBUG_COMMAND(cmd, parameters, num);
^~~~~~~~~~~~~~~~~~~~~~
Fix by casting 'len' to int in the macro MIPI_DBI_DEBUG_COMMAND().
There is no chance of overflow.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fix this warning:
drivers/gpu/drm/tinydrm/mipi-dbi.c: In function ‘mipi_dbi_debugfs_command_write’:
drivers/gpu/drm/tinydrm/mipi-dbi.c:905:8: warning: ‘cmd’ may be used uninitialized in this function [-Wmaybe-uninitialized]
ret = mipi_dbi_command_buf(mipi, cmd, parameters, i);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cmd can't be used uninitialized, but to satisfy the compiler,
initialize it to zero.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If the reserved region of memory has not been setup (most probably
because it has been limited by hardware or virtualisation), don't tell
the user to try and increase the amount of memory reserved for graphics.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223122037.16174-1-chris@chris-wilson.co.uk
eviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Some ttm/amd fixes.
* 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/powerplay: fix PSI feature on Polars12.
drm/amdgpu: refuse to reserve io mem for split VRAM buffers
drm/ttm: fix use-after-free races in vm fault handling
drm/amd/amdgpu: post card if there is real hw resetting performed
This set contains a couple of cleanups as well as support for a few more
simple panels.
-----BEGIN PGP SIGNATURE-----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=vKBu
-----END PGP SIGNATURE-----
Merge tag 'drm/panel/for-4.11-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/panel: Changes for v4.11-rc1
This set contains a couple of cleanups as well as support for a few more
simple panels.
* tag 'drm/panel/for-4.11-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/panel: simple: Specify bus width and flags for EDT displays
drm/panel: simple: Add Netron DY E231732
of: Add vendor prefix for Netron DY
drm/panel: simple: Add support for Tianma TM070JDHG30
of: Add vendor prefix for Tianma Micro-electronics
drm/panel: simple: Add support BOE NV101WXMN51
dt-bindings: display: Add BOE NV101WXMN51 panel binding
drm/panel: Constify device node argument to of_drm_find_panel()
Just a single change that hooks up the Tegra DRM parent device to the
correct device tree node.
-----BEGIN PGP SIGNATURE-----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=hZ4r
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.11-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.11-rc1
Just a single change that hooks up the Tegra DRM parent device to the
correct device tree node.
* tag 'drm/tegra/for-4.11-rc1' of git://anongit.freedesktop.org/tegra/linux:
gpu: host1x: Set OF node for new host1x devices
As we handoff the GPU reset to the waiter, we need to check we don't
miss a wakeup if it has already been sent prior to us starting the wait.
v2: Tweak checking for reset to be clear to the need before sleeping
after changing the task state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-16-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
If we change the wait_queue_t from using the autoremove_wake_function to
the default_wake_function, we no longer have to restore the wait_queue_t
entry on the wait_queue_head_t list after being woken up by it, as we
are unusual in sleeping multiple times on the same wait_queue_t.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-14-chris@chris-wilson.co.uk
After the request is cancelled, we then need to remove it from the
global execution timeline and return it to the context timeline, the
inverse of submit_request().
v2: Move manipulation of struct intel_wait to helpers
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-12-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The plan in the near-future is to allow requests to be removed from the
signaler. We can no longer then rely on holding a reference to the
request for the duration it is in the signaling tree, and instead must
obtain a reference to the request for the current operation using RCU.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-10-chris@chris-wilson.co.uk
A request is assigned a global seqno only when it is on the hardware
execution queue. The global seqno can be used to maintain a list of
requests on the same engine in retirement order, for example for
constructing a priority queue for waiting. Prior to its execution, or
if it is subsequently removed in the event of preemption, its global
seqno is zero. As both insertion and removal from the execution queue
may operate in IRQ context, it is not guarded by the usual struct_mutex
BKL. Instead those relying on the global seqno must be prepared for its
value to change between reads. Only when the request is complete can
the global seqno be stable (due to the memory barriers on submitting
the commands to the hardware to write the breadcrumb, if the HWS shows
that it has passed the global seqno and the global seqno is unchanged
after the read, it is indeed complete).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-9-chris@chris-wilson.co.uk
On reflection, we are only using the execute fence as a waitqueue on the
global_seqno and not using it for dependency tracking between fences
(unlike the submit and dma fences). By only treating it as a waitqueue,
we can then treat it similar to the other waitqueues during submit,
making the code simpler.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-8-chris@chris-wilson.co.uk
It had only one callsite and existed to keep the code clearer. Now
having shared the wait-on-error between phases and with plans to change
the wait-for-execute in the next few patches, remove the out of line
wait loop and move it into the main body of i915_wait_request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-7-chris@chris-wilson.co.uk
Add ourselves to the gpu error waitqueue earlier on, even before we
determine we have to wait on the seqno. This is so that we can then
share the waitqueue between stages in subsequent patches.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-6-chris@chris-wilson.co.uk
Replace the global device seqno with one for each engine, and account
for in-flight seqno on each separately. This is consistent with
dma-fence as each timeline has separate fence-contexts for each engine
and a seqno is only ordered within a fence-context (i.e. seqno do not
need to be ordered wrt to other engines, just ordered within a single
engine). This is required to enable request rewinding for preemption on
individual engines (we have to rewind the global seqno to avoid
overflow, and we do not have to rewind all engines just to preempt one.)
v2: Rename active_seqno to inflight_seqnos to more clearly indicate that
it is a counter and not equivalent to the existing seqno. Update
functions that operated on active_seqno similarly.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-3-chris@chris-wilson.co.uk
When dma_fence_signal() is called, it sets a flag to indicate the fence
is complete. Before the dma_fence is signaled, the seqno check will
first be passed. During an unlocked check (such as inside a waiter), it
is possible for the fence to be signaled even though the seqno has been
reset (by engine wraparound). In this case the waiter will be kicked,
but for an extra layer of protection we can check the persistent
signaled bit from the fence.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-2-chris@chris-wilson.co.uk
This reverts commit 7ee686034b "drm/i915/dp: Ratelimit DP aux timeout
messages" as although it successfully squelches the debug messages, when
it does so it generates a warning instead. CI lights up orange with all
the warnings!
In its current incarnation DRM_DEBUG_RATELIMITED is not usable for us,
and we need to first teach lib/ratelimit.c not to warn when used for
debug messages.
Fixes: 7ee686034b ("drm/i915/dp: Ratelimit DP aux timeout messages")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lyude <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Link: http://patchwork.freedesktop.org/patch/msgid/20170223115102.7059-1-chris@chris-wilson.co.uk
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Geminilake scalers can do 7x7 filtering for all supported input sizes,
so it doesn't need the "high quality" mode programming, which was
actually removed from that platform.
v2: Split dev_priv parameter change out. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>,
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223071600.14356-5-ander.conselvan.de.oliveira@intel.com
Geminilake has a third sprite plane (or fourth universal plane) that is
independent from the cursor. Make sure that for_each_plane_id_on_crtc()
is aware of that extra plane so that the watermark code takes it into
account.
Fixes: e9c9882556 ("drm/i915/glk: Configure number of sprite planes properly")
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <drm-intel-fixes@lists.freedesktop.org>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223071600.14356-2-ander.conselvan.de.oliveira@intel.com
Testing with concurrent GGTT accesses no longer show the coherency
problems from yonder, commit 5bab6f60cb ("drm/i915: Serialise updates
to GGTT with access through GGTT on Braswell"). My presumption is that
the root cause was more likely fixed by commit 3b5724d702 ("drm/i915:
Wait for writes through the GTT to land before reading back"), along
with the use of WC updates to the global gTT in commit 8448661d65
("drm/i915: Convert clflushed pagetables over to WC maps". Given
that the original symptoms can no longer be reproduced, time to remove
the workaround.
Testcase: igt/gem_concurrent_blit
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170220124718.14796-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Right now this is just leaving a lot of spam in dmesg that makes real
issues more difficult to debug. As well (as noted by the comment right
above the DRM_DEBUG_KMS() call) this is normal behavior when there's
nothing connected to the DisplayPort connector.
Signed-off-by: Lyude <lyude@redhat.com>
- Fix i.MX5 TV encoder probing in case no dac-supply regulator
is set in the device tree.
- Remove 64 pixel min_width/height limit, which unnecessarily
prohibits creation of small frame buffers.
- Add missing ipu_csi_set_downsize export, for media drivers
built as modules.
- Stop modifying pdev->dev.of_node for IPU client devices that
do not have an OF modalias to fix module autoloading.
-----BEGIN PGP SIGNATURE-----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=hfko
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-fixes-2017-02-17' of https://git.pengutronix.de/git/pza/linux into drm-next
imx-drm: TVE regulator, fb size limit, and ipu-v3 module fixes
- Fix i.MX5 TV encoder probing in case no dac-supply regulator
is set in the device tree.
- Remove 64 pixel min_width/height limit, which unnecessarily
prohibits creation of small frame buffers.
- Add missing ipu_csi_set_downsize export, for media drivers
built as modules.
- Stop modifying pdev->dev.of_node for IPU client devices that
do not have an OF modalias to fix module autoloading.
* tag 'imx-drm-fixes-2017-02-17' of https://git.pengutronix.de/git/pza/linux:
gpu: ipu-v3: Stop overwriting pdev->dev.of_node of child devices
gpu: ipu-v3: export ipu_csi_set_downsize
drm/imx: lift 64x64 pixel minimum framebuffer size requirement
drm/imx: imx-tve: Do not set the regulator voltage
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYoM2fAAoJEHm+PkMAQRiGr9MH/izEAMri7rJ0QMc3ejt+WmD0
8pkZw3+MVn71z6cIEgpzk4QkEWJd5rfhkETCeCp7qQ9V6cDW1FDE9+0OmPjiphDt
nnzKs7t7skEBwH5Mq5xygmIfkv+Z0QGHZ20gfQWY3F56Uxo+ARF88OBHBLKhqx3v
98C7YbMFLKBslKClA78NUEIdx0UfBaRqerlERx0Lfl9aoOrbBS6WI3iuREiylpih
9o7HTrwaGKkU4Kd6NdgJP2EyWPsd1LGalxBBjeDSpm5uokX6ALTdNXDZqcQscHjE
RmTqJTGRdhSThXOpNnvUJvk9L442yuNRrVme/IqLpxMdHPyjaXR3FGSIDb2SfjY=
=VMy8
-----END PGP SIGNATURE-----
Merge tag 'v4.10-rc8' into drm-next
Linux 4.10-rc8
Backmerge Linus rc8 to fix some conflicts, but also
to avoid pulling it in via a fixes pull from someone.
Setting retire=true is identical to using origin=ORIGIN_CS, so make the
same simplification to intel_fb_obj_flush() as already employed for
intel_fb_obj_invalidate().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170222114049.28456-6-chris@chris-wilson.co.uk
Flushing the cachelines for an object is slow, can be as much as 100ms
for a large framebuffer. We currently do this under the struct_mutex BKL
on execution or on pageflip. But now with the ability to add fences to
obj->resv for both flips and execbuf (and we naturally wait on the fence
before CPU access), we can move the clflush operation to a workqueue and
signal a fence for completion, thereby doing the work asynchronously and
not blocking the driver or its clients.
v2: Introduce i915_gem_clflush.h and use a new name, split out some
extras into separate patches.
Suggested-by: Akash Goel <akash.goel@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170222114049.28456-5-chris@chris-wilson.co.uk
We have three different paths by which userspace wants to flush the
display plane (i.e. objects with obj->pin_display). Use a common helper
to identify those paths and to simplify a later change.
v2: Include the conditional in the name, i915_gem_object_flush_if_display
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170222114049.28456-3-chris@chris-wilson.co.uk
The change_domain tracepoint has been inaccurate for a few years - it
doesn't fully capture the domains, especially with userspace bypassing
them. It is defunct, misleading and time to be removed.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170222114049.28456-1-chris@chris-wilson.co.uk
Handling the dynamic charp module parameter requires us to copy it for
the error state, or remember to lock it when reading (in case it used
with 0600).
v2: Use __always_inline and __builtin_strcmp
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170221162619.15954-1-chris@chris-wilson.co.uk
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
When not using GuC submission, the ring buffer size for GVT context is
512KB which is the max size. When switching to GuC submission, the ring
buffer size is required to be less than 16KB. So use the GVT context
default ring buffer size if GuC submission is enabled.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170216063639.GA17107@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
When the fast blit path fails while attempting to move a buffer from RAM
to VRAM, we fall back to a CPU-based memcpy that cannot handle split VRAM
buffers. Instead of crashing, simply fail the buffer move.
Ideally, we would teach TTM about split buffers so that the fallback still
works in this case, but that is quite involved. So for now, apply the
simplest possible fix.
Fixes: 40361bb1704b ("drm/amdgpu: add VRAM manager v2")
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The vm fault handler relies on the fact that the VMA owns a reference
to the BO. However, once mmap_sem is released, other tasks are free to
destroy the VMA, which can lead to the BO being freed. Fix two code
paths where that can happen, both related to vm fault retries.
Found via a lock debugging warning which flagged &bo->wu_mutex as
locked while being destroyed.
Fixes: cbe12e74ee ("drm/ttm: Allow vm fault retries")
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Two new tracepoints placed at the call sites where requests are
actually passed to the GPU enable userspace to track engine
utilisation.
These tracepoints are only enabled when the
DRM_I915_LOW_LEVEL_TRACEPOINTS Kconfig option is enabled.
v2: Fix compilation with !CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS.
v3: Name global seqno consistently across tracepoints.
v4: Remove port info from request out tracepoint. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
i915_gem_ring_notify is more appropriate since we do not have
the request information at this point, but it is simply a
signal from the engine that some request has been completed.
v2:
* Always trace and log if there were any waiters.
* Rename to intel_engine_notify. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
These new tracepoints are emitted once the request is ready to
be submitted to the GPU and once the request is about to
be submitted to the GPU, respectively.
Former condition triggers as soon as all the fences and
dependencies have been resolved, and the latter once the
backend is about to submit it to the GPU.
New tracepoint are enabled via the new
DRM_I915_LOW_LEVEL_TRACEPOINTS Kconfig option which is disabled
by default to alleviate the performance impact concerns.
v2: Move execute tracepoint to __i915_gem_request_submit.
(Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tracepoint is not used and won't be suitable for its replacement.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Provide the same information as the other request event classes.
v2: Pass in flags so we can properly report the blocking status.
(Chris Wilson)
v3: Log hex with 0x prefix for clarity.
v4: Derive blocking status from flags. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Rename it to i915_gem_request_queue and fix the logged info
equivalent to the i915_gem_request even class. Also moved it
a bit further apart from the i915_gem_request_add tracepoint
since they otherwise provide similar information too close in
time.
v2: Remove sw fence singalling. We will rely on the soon to
come GuC scheduling backend to enable that. (Chris Wilson)
v3: Log hex with 0x prefix for clarity.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
At the moment only the global seqno is logged which is not set
until the request is ready for submission.
Add the per-contex seqno and the context hardware id which are
both interesting data points.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Compact the name of the macro and reg_state variable, and cache
some data in local variables to make the function more compact
and more readable.
v2: Fixup some checkpatch warnings.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170221095839.30525-1-tvrtko.ursulin@linux.intel.com
The hardware requires that the tail pointer only advance in qword units,
so assert that the value we write is aligned to qwords, and similarly
enforce this restriction onto the request->tail.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170217163833.731-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Verify that the refcount of all power wells match their HW enabled
state at the end of modeset HW state readout.
Also add documentation on how the reference count for each power well is
supposed to be acquired during initialization and HW state readout.
Suggested by Ander.
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487345986-26511-6-git-send-email-imre.deak@intel.com
Atm, power wells that BIOS has enabled, but which we don't explicitly
enable during power domain initialization would get disabled as we clear
the BIOS request bit in the given power well sync_hw hook. To prevent
this copy over any set request bits in the BIOS request register to the
driver request register and clear the BIOS request bit only afterwards.
This doesn't make a difference now, since we enable all power wells
during power domain initialization. A follow-up patchset will add power
wells for which this isn't true, so fix up the inconsistency.
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487345986-26511-5-git-send-email-imre.deak@intel.com
Atm, in the power well sync_hw hook we are clearing all BIOS request
bits, not just the one corresponding to the given power well. This could
turn off an unrelated power well inadvertently if it didn't have a
request bit set in the driver request register.
This didn't cause a problem so far, since we enabled all power wells
explicitly before clearing the BIOS request register. A follow-up
patchset will add power wells that won't get enabled this way, so fix up
the inconsistency.
Note that this patch only makes the clearing of the BIOS req register
more logical. Power wells without a reference would still get disabled
by the end of power domain initialization, that is fixed by the next
patch.
v2:
- Clarify in the commit log that this patch doesn't address the case of
power wells without a reference. (Ander)
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487345986-26511-4-git-send-email-imre.deak@intel.com
So far the sync_hw hook wasn't called for power wells not belonging to
any power domain, that is the GEN9 PW1 and MISC_IO power wells. This
wasn't a problem so far since the goal of the sync_hw hook - to clear
the corresponding BIOS request bit - was guaranteed by clearing the
whole BIOS request register elsewhere. This will change with the next
patch, so fix up the inconsistency.
While at it clean up the power well iterator helpers and move them to
the rest of iterators.
v2:
- Clean up the power well iterator helpers. (Ander)
- Move the helpers to i915_drv.h.
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487345986-26511-3-git-send-email-imre.deak@intel.com
Doing an explicit enable/disable in the power well sync_hw hook based on
the power well's reference count is redundant, since by the time these
hooks are called all the power wells are enabled and have a reference.
So remove the redundant toggling.
This is needed by a follow-up patchset that adds power wells which we
can't enable/disable during power domain initialization and so want to
preserve their state until modeset init time.
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487345986-26511-2-git-send-email-imre.deak@intel.com
The uncached mmio is sufficient to queue the mmio writes without raising
forcewake. The forced flush along with acquiring forcewake from the
posting read is not required for adjusting the RPS frequency.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170220094713.22874-3-chris@chris-wilson.co.uk
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
If intel_set_rps() is called whilst the hw is disabled, just store the
requested frequency (from the user) for application when we wake the hw
up.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170220094713.22874-2-chris@chris-wilson.co.uk
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Instead of having each back-end provide identical guards, just have a
singular set in intel_set_rps() to verify that the caller is obeying the
rules.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170220094713.22874-1-chris@chris-wilson.co.uk
We don't need struct_mutex for acquiring an rpm wakeref, and do not need
to serialise those register read (it's the wrong mutex for those
registers in any case). Begone!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170218150050.10414-1-chris@chris-wilson.co.uk
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Prevent the overflow check from firing on machines with the full 4lvl
page tables, that are not restricted to GEN8_LEGACY_PDES.
v2: Also fix the off-by-one in the compare
Fixes: 894ccebee2 ("drm/i915: Micro-optimise gen8_ppgtt_insert_entries()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170217141455.19877-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
There is a new version of DMC available for Geminilake.
It's release notes only mention:
- Enhancement in the FW to restore the PG2 state
v2: Fixed the platform name on commit message.
Noticed by Jani S.
v3: cook on top of drm-tip without depending on kbl
one so CI can check.
v4: make v3 on top of v2.
Cc: David Weinehall <tao@kernel.org>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487295515-15396-1-git-send-email-rodrigo.vivi@intel.com
Add driver to support the Multi-Inno MI0283QT display panel.
It has an ILI9341 MIPI DBI compatible display controller.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Add support for MIPI DBI compatible controllers.
Interface type C option 1 and 3 are supported (SPI).
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Add common functionality needed by many tinydrm drivers.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thierry Reding <treding@nvidia.com>
tinydrm provides helpers for very simple displays that can use
CMA backed framebuffers and need flushing on changes.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thierry Reding <treding@nvidia.com>
Check whether we need to post rather than whether the asic is
posted. There are some cases (e.g., GPU reset or resume from
hibernate) where we need to force post even if the asic has
been posted.
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
i915 and GVT fixes for v4.11 merge window
* tag 'drm-intel-next-fixes-2017-02-17' of git://anongit.freedesktop.org/git/drm-intel: (32 commits)
drm/i915: Fix not finding the VBT when it overlaps with OPREGION_ASLE_EXT
drm/i915: Pass timeout==0 on to i915_gem_object_wait_fence()
drm/i915/gvt: Disable access to stolen memory as a guest
drm/i915: Avoid spurious WARNs about the wrong pipe in the PPS code
drm/i915: Check for timeout completion when waiting for the rq to submitted
drm/i915: A hotfix for making aliasing PPGTT work for GVT-g
drm/i915: Restore context and pd for ringbuffer submission after reset
drm/i915: Let execlist_update_context() cover !FULL_PPGTT mode.
drm/i915/lspcon: Fix resume time initialization due to unasserted HPD
drm/i915/gen9+: Enable hotplug detection early
drm/i915: Reject set-tiling-ioctl with stride==0 and a tiling mode
drm/i915: Recreate internal objects with single page segments if dmar fails
drm/i915/gvt: return error code if dma map iova failed
drm/i915/gvt: optimize the inhibit context mmio load
drm/i915/gvt: add sprite plane flip done support.
drm/i915/gvt: add missing display part reset for vGPU reset
drm/i915/gvt: Fix shadow context descriptor
drm/i915/gvt: Fix alignment for GTT allocation
drm/i915/gvt: fix crash at function release_shadow_wa_ctx
drm/i915/gvt: enable IOMMU for gvt
...
If we wait upon the full (i.e. all shared fences, or upon an exclusive
fence) reservation object successfully, we know that all fences beneath
it have been signaled, so long as no new fences were added whilst we
slept. If the reservation_object remains the same, as detected by its
seqcount, we can then reap all the fences upon completion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170217151304.16665-6-chris@chris-wilson.co.uk
As a backup to waiting on a user-interrupt from the GPU, we use a heavy
and frequent timer to wake up the waiting process should we detect an
inconsistency whilst waiting. After seeing a "missed interrupt", the
next time we wait, we restart the heavy timer. This patch is more
reluctant to restart the timer and will only do so if we have not see any
interrupts since when we started the fake irq timer. If we are seeing
interrupts, then the waiters are being woken normally and we had an
incoherency that caused to miss last time - that is unlikely to reoccur
and so taking the risk of stalling again seems pragmatic.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170217151304.16665-5-chris@chris-wilson.co.uk
If the waiter was currently running, assume it hasn't had a chance
to process the pending interrupt (e.g, low priority task on a loaded
system) and wait until it sleeps before declaring a missed interrupt.
References: https://bugs.freedesktop.org/show_bug.cgi?id=99816
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170217151304.16665-4-chris@chris-wilson.co.uk
If an interrupt has been posted, and we were spinning on the active
seqno waiting for it to advance but it did not, then we can expect that
it will not see its advance in the immediate future and should call into
the irq-seqno barrier. We can stop spinning at this point, and leave the
difficulty of handling the coherency to the caller.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170217151304.16665-3-chris@chris-wilson.co.uk
When the timer expires for checking on interrupt processing, check to
see if any interrupts arrived within the last time period. If real
interrupts are still being delivered, we can be reassured that we
haven't missed the final interrupt as the waiter will still be woken.
Only once all activity ceases, do we have to worry about the waiter
never being woken and so need to install a timer to kick the waiter for
a slow arrival of a seqno.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170217151304.16665-2-chris@chris-wilson.co.uk
In Geminilake, the degamma table is enabled or disabled by the pipe CSC
enable bit, so its active even when running in the legacy gamma mode.
So always set sane values for that table, since the default value is all
zeroes.
This fixes blank screens after a suspend/resume cycle while legacy gamma
is in use.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170217120630.6143-2-ander.conselvan.de.oliveira@intel.com
We have a few open coded instances in the execlists code and an
almost suitable helper in intel_ringbuf.c
We can consolidate to a single helper if we change the existing
helper to emit directly to ring buffer memory and move the space
reservation outside it.
v2: Drop memcpy for memset. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170216122325.31391-2-tvrtko.ursulin@linux.intel.com
Use the "*batch++ = " style as in the ring emission for better
readability and also simplify the logic a bit by consolidating
the offset and size calculations and overflow checking. The
latter is a programming error so it is not required to check
for it after each write to the object, but rather do it once the
whole state has been written and fail the driver if something
went wrong.
v2: Rebase.
v3: Keep track of offsets and sizes in bytes for simplicity
and rename function pointer variable to _fn suffix.
(Chris Wilson)
v4: Fix size calc broken in v3 and add alignment warning. (Chris Wilson)
v5: Fix return code.
v6: I added an exit from loop in v5 but forgot to put back
the object teardown.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v5)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
We can call the engine cleanup vfunc instead of duplicating the
decision making here.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
It is only used within intel_ringbuffer.c
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.oc.uk>
704a6c008b7942bb7f30bb43d2a6bcad7f543662 broke pci msi rearm for g92 GPUs.
g92 needs the nv46_pci_msi_rearm, where g94+ gpus used nv40_pci_msi_rearm.
Reported-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
This seems to be absolutely necessary for a lot of NV40.
Reported-by: gsgf on IRC/freenode
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
v2: Set entry to 0xff if not found
Add cap entry for ver 0x30 tables
Rework to fix memory leak
v3: More error checks
Simplify check for invalid entries
v4: disable for ver 0x10 for now
move assignments after the second last return
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Greatly improves the chances of recovering the GPU from a CTXSW_TIMEOUT.
Tested with piglit's arb_shader_image_load_store-atomicity, which causes
GR to hang in such a way that recovery failed (CTXSW_TIMEOUT continually
re-triggers).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This will serve as a basis for implementing some improvements to how
we recover the GPU from channel errors.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The previous commit simply changes the interface, but should result in
the same behaviour as previously. This commit has been split out from
it as it can result in a different channel being selected.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
FIFO gives us load/save/switch status, and we need to be able to determine
which direction a "switch" is failing during channel recovery.
In order to do this, we apparently need to query the engine itself.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There are instances (such as non-recoverable GPU page faults) where
NVKM decides that a channel's context is no longer viable, and will
be removed from the runlist.
This commit notifies the owner of the channel when this happens, so
it has the opportunity to take some kind of recovery action instead
of hanging.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
If the led class registration fails, we free drm->led but do not reset
it to NULL, which means that the suspend/resume/fini function will act
as if everything went well in init() and will likely crash the kernel.
This patch adds the missing drm->led = NULL.
Reported-by: Emmanuel Pescosta <emmanuelpescosta099@gmail.com>
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tested on a G92, seems to work. Confirmed by 8 mmiotraces.
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Setting dev->of_node changes the modalias and breaks module autoloading.
Since there is an of_node field in the platform data passed to child
devices, we don't even need this anymore.
Suggested-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This function will be used by the media drivers and needs to be exported
to allow them to be built as modules.
Reported-by: Russell King <linux@armlinux.org.uk>
Fixes: 867341b958 ("gpu: ipu-v3: add ipu_csi_set_downsize")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
There is no reason to limit framebuffer size to 64x64 pixels at a
minimum on creation. The actual scanout limitations (width >= 13 for the
base plane and height >= 2) are checked in atomic_check.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Commit deb65870b5 ("drm/imx: imx-tve: check the value returned by
regulator_set_voltage()") exposes the following probe issue:
63ff0000.tve supply dac not found, using dummy regulator
imx-drm display-subsystem: failed to bind 63ff0000.tve (ops imx_tve_ops): -22
When the 'dac-supply' is not passed in the device tree a dummy regulator is
used and setting its voltage is not allowed.
To fix this issue, do not set the dac-supply voltage inside the driver
and let its voltage be specified in the device tree.
Print a warning if the the 'dac-supply' voltage has a value different
from 2.75V.
Fixes: deb65870b5 ("drm/imx: imx-tve: check the value returned by regulator_set_voltage()")
Cc: <stable@vger.kernel.org> # 4.8+
Suggested-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This will allow the DRM to share memory objects between clients later
down the track.
For the moment, the only immediate benefit is less logic required to
handle suspend/resume.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We never have any need for a double-linked list here, and as there's
generally a large number of these objects, replace it with a single-
linked list in order to save some memory.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We want a supervisor client of NVKM (such as the DRM) to be able to
allow sharing of resources (such as memory objects) between clients.
To allow this, the supervisor creates all its clients as children of
itself, and will use an upcoming ioctl to permit sharing.
Currently it's not possible for indirect clients to use subclients.
Supporting this will require an additional field in the main ioctl.
This isn't important currently, but will need to be fixed for virt.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The fields were already in struct nvkm_oclass for some reason (probably
as an accidental left-over).
Preparation for supporting subclients.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
nvkm_object::client refers to the client that created the object, which,
is currently always the same as the ioctl caller.
Upcoming patches introduce the concept of subclients, where a parent is
able to access the object trees of its children, making the above no
longer true.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
It turns out we have a nice and convenient way of looking up a specific
object type already, by using the func pointer as a key.
This will be used to remove the separate object trees for each type we
need to be able to search for.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Chris Wilson