When both VBI and video are streaming, and video stream is stopped,
a subsequent trial to restart it will fail, because S_FMT will
return -EBUSY.
That prevents applications like zvbi to work properly.
Please notice that, while this fix it fully for zvbi, the
best is to get rid of streaming_users and res_get logic as a hole.
However, this single-line patch is better to be merged at -stable.
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There are two modprobe parameters for VBI that aren't used
anywhere (one for debug, the other one related to the buffer
size). Get rid of them!
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Morgan Phillips <winter2718@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Morgan Phillips <winter2718@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
A test in uvc_video_decode_isoc() checks whether an image has been
received from the camera completely. For this the data amount is compared
to the buffer length, which, however, doesn't have to be equal to the
image size. Switch to using formats .sizeimage field for an exact
expected image size.
[Renamed image_size to frame_size]
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/usb/hackrf/hackrf.c:64:3: warning: this decimal constant is unsigned only in ISO C90 [enabled by default]
.rangehigh = 4294967294, /* max u32, hw goes over 7GHz */
^
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
V4L2 driver for HackRF SDR. Very basic version, with reduced
feature set. Driver implements receiver only, hardware supports
also transmitter.
USB ID 1d50:6089. Model HackRF One
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
As reported on [1], this device needs this quirk to be able to
reliably initialise the webcam.
[1] http://ubuntuforums.org/showthread.php?t=2145996
Cc: stable@vger.kernel.org
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The uvcvideo webcam driver exposes the v4l2 control "Exposure (Absolute)"
which allows the user to control the exposure time of the webcam,
essentially controlling the brightness of the received image. By default
the webcam automatically adjusts the exposure time automatically but the
if you set the control "Exposure, Auto"="Manual Mode" the user can fix
the exposure time.
Unfortunately it seems that the Logitech C920 has a firmware bug where
it will forget that it's in manual mode temporarily during initialisation.
This means that the camera doesn't respect the exposure time that the user
requested if they request it before starting to stream video. They end up
with a video stream which is either too bright or too dark and must reset
the controls after video starts streaming.
This patch introduces the quirk UVC_QUIRK_RESTORE_CTRLS_ON_INIT which
causes the cached controls to be re-uploaded to the camera immediately
after initialising the camera. This quirk is applied to the C920 to work
around this camera bug.
Signed-off-by: William Manley <will@williammanley.net>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Map V4L2_CID_TILT_SPEED and V4L2_CID_PAN_SPEED to the standard UVC
CT_PANTILT_RELATIVE_CONTROL terminal control request.
Tested by plugging a Logitech ConferenceCam C3000e USB camera
and controlling pan/tilt from the userspace using the VIDIOC_S_CTRL ioctl.
Verified that it can pan and tilt at the same time in both directions.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Used tda18212 tuner is implemented as a I2C driver. Use em28xx
tuner I2C client for tda18212 driver.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Used tda18212 tuner is implemented as I2C driver. Implement I2C
client to anysee and use it for tda18212.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
It crash kernel when device was removed while it was streaming.
That is because we removed driver and frontend thread was still
running. Use new callback which allows I2C driver removal just
after frontend is unregistered.
V2: fixed by reported by Daniel
Reported-by: Daniel Glöckner <daniel-gl@gmx.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add tuner_detach callback in order to allow custom detach. It is
needed when tuner driver is implemented I2C client or some other
kernel bus, but not proprietary dvb_attach / dvb_detach.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add frontend_detach callback in order to allow custom detach. It is
needed when demod driver is implemented I2C client or some other
kernel bus, but not proprietary dvb_attach / dvb_detach.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
I2C driver address is passed as a i2c_new_device() parameter when
device is created. Thus no need to keep it in config struct.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Biggest problem of that function is complexity. Try reduce complexity:
* define macros to detect all 3 supported xfers
* remove duplicate message maximum size checks
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Re-implement sleep. Based USB sniffs taken from the latest Hauppauge
windows driver version 07/10/2014, 14.6.23.32191.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Change the it913x driver to use the I2C high lever tuner
binding model. As af9035 depends on it, add a code there
to do the binding.
[mchehab@osg.samsung.com: Merge 3 patches into one, because
we don't want to break bisect due to the conversion]
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Remove tuner_ prefix from module name and file names. Prefix was
added due to file name conflict on media out-tree build system.
Demodulator having same name does not exists anymore. So lets
remove dumb prefix.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Reverts commit 3ab2512337
[media] af9035: override tuner for AVerMedia A835B devices
Original commit itself is correct, but it was replaced by more
general solution (commit 1cbbf90d04).
This old solution was committed by a accident and is not needed
anymore.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Integrated RF tuner of IT9135 is connected to demod clock source
named dyn0_clk. Enable that clock source in order to provide stable
clock early enough.
Cc: Bimow Chen <Bimow.Chen@ite.com.tw>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There is no need to init flags before calling spin_lock_irqsave().
spin_lock_irqsave is macro which stores value to 'flags'.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Kernel logging system needs pointer to usb interface device in
order to print names and bus numbers properly. There was wrong
device pointer given and log printings wasn't correct.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Sample rate calculation gives a little bit too large results because
in real life there was around one milliseconds (~one usb packet) too
much data for given time. Calculate time more accurate in order to
provide better results.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There is no need to init flags before calling spin_lock_irqsave().
spin_lock_irqsave is a macro which stores value to 'flags'.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Kernel logging system needs pointer to usb interface device in
order to print names and bus numbers properly. There was wrong
device pointer given and log printings wasn't correct.
Remove some debug logging from v4l2 ioctl functions. v4l2 core debug
prints almost same information when enabled.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Free all reserved USB buffers and URBs on failure. Return all queued
buffers to vb2 with state queued on error case.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There are some patches that depends on media-v3.16-rc6.
So, merge back from upstream before applying them.
* linus/master: (1123 commits)
drm/nouveau: ltc/gf100-: fix cbc issues on certain boards
drm/bochs: add missing drm_connector_register call
drm/cirrus: add missing drm_connector_register call
staging: vt6655: buffer overflow in ioctl
USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters
USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter
USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter
USB: EHCI: unlink QHs even after the controller has stopped
[SCSI] fix for bidi use after free
[SCSI] fix regression that accidentally disabled block-based tcq
[SCSI] libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu
drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page
drm/nouveau/runpm: fix module unload
drm/radeon/px: fix module unload
vgaswitcheroo: add vga_switcheroo_fini_domain_pm_ops
drm/radeon: don't reset dma on r6xx-evergreen init
drm/radeon: don't reset sdma on CIK init
drm/radeon: don't reset dma on NI/SI init
drm/radeon/dpm: fix resume on mullins
drm/radeon: Disable HDP flush before every CS again for < r600
...
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Fix indentation of a comment, put it on the same level of the code it
refers to.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
add the following IDs
USB_PID_PCTV_78E (0x025a) for PCTV 78e
USB_PID_PCTV_79E (0x0262) for PCTV 79e
For these it9135 devices.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Instead of allocating a var to store 0 and just return it,
change the code to return 0 directly.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Instead of using if (foo == false), just use
if (!foo).
That allows a faster mental parsing when analyzing the
code.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/usb/em28xx/em28xx-core.c:297:16: warning: cast to restricted __le16
drivers/media/usb/em28xx/em28xx-cards.c:2249:20: warning: symbol 'em28xx_bcount' was not declared. Should it be static?
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/usb/cx231xx/cx231xx-avcore.c:2226:15: warning: cast to restricted __le32
drivers/media/usb/cx231xx/cx231xx-avcore.c:2447:15: warning: cast to restricted __le32
drivers/media/usb/cx231xx/cx231xx-avcore.c:2475:15: warning: cast to restricted __le32
drivers/media/usb/cx231xx/cx231xx-avcore.c:2500:15: warning: cast to restricted __le32
drivers/media/usb/cx231xx/cx231xx-avcore.c:2647:18: warning: incorrect type in assignment (different base types)
drivers/media/usb/cx231xx/cx231xx-avcore.c:2659:21: warning: cast to restricted __le32
drivers/media/usb/cx231xx/cx231xx-dvb.c:743:57: warning: Using plain integer as NULL pointer
drivers/media/usb/cx231xx/cx231xx-dvb.c:776:57: warning: Using plain integer as NULL pointer
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/usb/pwc/pwc-v4l.c:55:12: warning: symbol 'pwc_auto_whitebal_qmenu' was not declared. Should it be static?
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:24:5: warning: symbol 'dvb_usbv2_disable_rc_polling' was not declared. Should it be static?
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/usb/s2255/s2255drv.c:2248:20: warning: cast to restricted __le16
At the USB structs there are two different idProduct:
usb_device_id::idProduct - already on CPU endiannes
usb_device::descriptor.idProduct - with is LE16
In this specific case, the driver checks for the one at usb_device_id
struct, with already have CPU endianness. So, no conversion is required.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/usb/gspca/kinect.c:151:19: warning: incorrect type in assignment (different base types)
drivers/media/usb/gspca/kinect.c:152:19: warning: incorrect type in assignment (different base types)
drivers/media/usb/gspca/kinect.c:153:19: warning: incorrect type in assignment (different base types)
drivers/media/usb/gspca/kinect.c:191:13: warning: restricted __le16 degrades to integer
drivers/media/usb/gspca/kinect.c:217:16: warning: incorrect type in assignment (different base types)
drivers/media/usb/gspca/kinect.c:218:16: warning: incorrect type in assignment (different base types)
Note that this fixes a real bug where cpu_to_le16 was used instead of the correct
le16_to_cpu.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/usb/dvb-usb/pctv452e.c:886:64: warning: Using plain integer as NULL pointer
drivers/media/usb/dvb-usb/pctv452e.c:903:63: warning: Using plain integer as NULL pointer
drivers/media/usb/dvb-usb/pctv452e.c:968:19: warning: Using plain integer as NULL pointer
drivers/media/usb/dvb-usb/pctv452e.c:1026:19: warning: Using plain integer as NULL pointer
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/usb/dvb-usb-v2/mxl111sf.c:34:5: warning: symbol 'dvb_usb_mxl111sf_isoc' was not declared. Should it be static?
drivers/media/usb/dvb-usb-v2/mxl111sf.c:38:5: warning: symbol 'dvb_usb_mxl111sf_spi' was not declared. Should it be static?
drivers/media/usb/dvb-usb-v2/mxl111sf.c:46:5: warning: symbol 'dvb_usb_mxl111sf_rfswitch' was not declared. Should it be static?
drivers/media/usb/dvb-usb-v2/mxl111sf.c:890:22: warning: symbol 'mxl111sf_i2c_algo' was not declared. Should it be static?
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/usb/dvb-usb/dw2102.c:670:65: warning: restricted __le16 degrades to integer
drivers/media/usb/dvb-usb/dw2102.c:1601:32: warning: restricted __le16 degrades to integer
drivers/media/usb/dvb-usb/dw2102.c:1644:40: warning: restricted __le16 degrades to integer
drivers/media/usb/dvb-usb/dw2102.c:1644:40: warning: restricted __le16 degrades to integer
drivers/media/usb/dvb-usb/dw2102.c:1644:40: warning: restricted __le16 degrades to integer
drivers/media/usb/dvb-usb/dw2102.c:1644:40: warning: restricted __le16 degrades to integer
drivers/media/usb/dvb-usb/dw2102.c:1644:40: warning: restricted __le16 degrades to integer
drivers/media/usb/dvb-usb/dw2102.c:1644:40: warning: restricted __le16 degrades to integer
drivers/media/usb/dvb-usb/dw2102.c:1904:34: warning: symbol 'p1100' was not declared. Should it be static?
drivers/media/usb/dvb-usb/dw2102.c:1911:34: warning: symbol 's660' was not declared. Should it be static?
drivers/media/usb/dvb-usb/dw2102.c:1930:34: warning: symbol 'p7500' was not declared. Should it be static?
drivers/media/usb/dvb-usb/dw2102.c:1937:34: warning: symbol 's421' was not declared. Should it be static?
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
There is no need to keep local copy of usb_device pointer as we
have same pointer stored and available easily from device state.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Reported by Dan Carpenter:
The patch d10d1b9ac97b: "[media] dvb_usb_v2: use dev_* logging
macros" from Jun 26, 2012, leads to the following Smatch complaint:
drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c:31 dvb_usb_v2_generic_io()
error: we previously assumed 'd' could be null (see line 29)
...
Remove whole check as it must not happen in any case. Driver is
totally broken if it does not have valid pointer to device.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Read MAC address from the EEPROM.
This version two corrects a flaw in the result code returning that
did exist in the first version.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
TechnoTrend TT-connect CT2-4650 CI (0b48:3012) is an USB DVB-T2/C tuner with
the following components:
USB interface: Cypress CY7C68013A-56LTXC
Demodulator: Silicon Labs Si2168-A20
Tuner: Silicon Labs Si2158-A20
CI chip: CIMaX SP2HF
The firmware for the tuner is the same as for TechnoTrend TT-TVStick CT2-4400.
See https://www.mail-archive.com/linux-media@vger.kernel.org/msg76944.html
The demodulator needs a firmware that can be extracted from the Windows drivers.
File ttConnect4650_64.sys should be extracted from
http://www.tt-downloads.de/bda-treiber_4.1.0.4.zip (MD5 sum below).
3464bfc37a47b4032568718bacba23fb ttConnect4650_64.sys
Then the firmware can be extracted:
dd if=ttConnect4650_64.sys ibs=1 skip=273376 count=6424 of=dvb-demod-si2168-a20-01.fw
The SP2 CI module requires a definition of a function cxusb_tt_ct2_4650_ci_ctrl
that is passed on to the SP2 driver and called back for CAM operations.
[crope@iki.fi: meld USB ID define patch to this]
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
TS mode must be set in the existing TechnoTrend CT2-4400 driver.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
TS mode must be set in the existing PCTV 292e driver.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Implement set voltage operation.
Separate TS clock as a own configuration parameter.
Add TS clock polarity parameter.
[crope@iki.fi: merge em28xx driver m88ds3103 config change patch
to that one, in order to keep build unbroken]
Signed-off-by: Nibble Max <nibble.max@gmail.com>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Normally, ADAP_STREAMING bit is set in dvb_usb_start_feed and cleared in
dvb_usb_stop_feed.
But in exceptional cases, for example, when the tv is playing programs
and the tuner is pulled out, then dvb_usbv2_disconnect is called.
In such case, it will first call dvb_usbv2_adapter_frontend_exit to stop
dvb_frontend_thread, and then call dvb_usbv2_adapter_dvb_exit to clear
ADAP_STREAMING bit.
At this point, if dvb_frontend_thread is sleeping and waiting for
ADAP_STREAMING to be cleared to get out of sleep. then
dvb_frontend_thread can never be stoped, because clearing ADAP_STREAMING
bit is performed after dvb_frontend_thread is stopped (i.e. performed in
dvb_usbv2_adapter_dvb_exit).
So, deadlock:
[ 240.822037] INFO: task khubd:497 blocked for more than 120 seconds.
[ 240.822655] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.830493] khubd D c0013b3c 0 497 2 0x00000000
[ 240.836996] [<c0013b3c>] (__schedule+0x200/0x54c) from [<c00110f4>] (schedule_timeout+0x14c/0x19c)
[ 240.845940] [<c00110f4>] (schedule_timeout+0x14c/0x19c) from [<c00137f4>] (wait_for_common+0xac/0x150)
[ 240.855234] [<c00137f4>] (wait_for_common+0xac/0x150) from [<c004989c>] (kthread_stop+0x58/0x90)
[ 240.864004] [<c004989c>] (kthread_stop+0x58/0x90) from [<c03b2ebc>] (dvb_frontend_stop+0x3c/0x9c)
[ 240.872849] [<c03b2ebc>] (dvb_frontend_stop+0x3c/0x9c) from [<c03b2f3c>] (dvb_unregister_frontend+0x20/0xd8)
[ 240.882666] [<c03b2f3c>] (dvb_unregister_frontend+0x20/0xd8) from [<c03ed938>] (dvb_usbv2_exit+0x68/0xfc)
[ 240.892204] [<c03ed938>] (dvb_usbv2_exit+0x68/0xfc) from [<c03eda18>] (dvb_usbv2_disconnect+0x4c/0x70)
[ 240.901499] [<c03eda18>] (dvb_usbv2_disconnect+0x4c/0x70) from [<c031c050>] (usb_unbind_interface+0x58/0x188)
[ 240.911395] [<c031c050>] (usb_unbind_interface+0x58/0x188) from [<c02c3e78>] (__device_release_driver+0x74/0xd0)
[ 240.921544] [<c02c3e78>] (__device_release_driver+0x74/0xd0) from [<c02c3ef0>] (device_release_driver+0x1c/0x28)
[ 240.931697] [<c02c3ef0>] (device_release_driver+0x1c/0x28) from [<c02c39b8>] (bus_remove_device+0xc4/0xe4)
[ 240.941332] [<c02c39b8>] (bus_remove_device+0xc4/0xe4) from [<c02c1344>] (device_del+0xf4/0x178)
[ 240.950106] [<c02c1344>] (device_del+0xf4/0x178) from [<c0319eb0>] (usb_disable_device+0xa0/0x1c8)
[ 240.959040] [<c0319eb0>] (usb_disable_device+0xa0/0x1c8) from [<c03128b4>] (usb_disconnect+0x88/0x188)
[ 240.968326] [<c03128b4>] (usb_disconnect+0x88/0x188) from [<c0313edc>] (hub_thread+0x4d0/0x1200)
[ 240.977100] [<c0313edc>] (hub_thread+0x4d0/0x1200) from [<c0049690>] (kthread+0xa4/0xb0)
[ 240.985174] [<c0049690>] (kthread+0xa4/0xb0) from [<c0009118>] (ret_from_fork+0x14/0x3c)
[ 240.993259] INFO: task kdvb-ad-0-fe-0:3256 blocked for more than 120 seconds.
[ 241.000349] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 241.008162] kdvb-ad-0-fe-0 D c0013b3c 0 3256 2 0x00000000
[ 241.014507] [<c0013b3c>] (__schedule+0x200/0x54c) from [<c03eda44>] (wait_schedule+0x8/0x10)
[ 241.022924] [<c03eda44>] (wait_schedule+0x8/0x10) from [<c001120c>] (__wait_on_bit+0x74/0xb8)
[ 241.031434] [<c001120c>] (__wait_on_bit+0x74/0xb8) from [<c00112b8>] (out_of_line_wait_on_bit+0x68/0x70)
[ 241.040902] [<c00112b8>] (out_of_line_wait_on_bit+0x68/0x70) from [<c03e5e88>] (dvb_usb_fe_sleep+0xf4/0xfc)
[ 241.050618] [<c03e5e88>] (dvb_usb_fe_sleep+0xf4/0xfc) from [<c03b4b74>] (dvb_frontend_thread+0x124/0x4e8)
[ 241.060164] [<c03b4b74>] (dvb_frontend_thread+0x124/0x4e8) from [<c0049690>] (kthread+0xa4/0xb0)
[ 241.068929] [<c0049690>] (kthread+0xa4/0xb0) from [<c0009118>] (ret_from_fork+0x14/0x3c)
Fix it by calling dvb_usbv2_adapter_frontend_exit() latter.
Test enviroment: odroidx2 + Hauppauge(WinTV-Aero-M)
Signed-off-by: Changbing Xiong <cb.xiong@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This patch fix spelling typo in printk within vairous
part of the code.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Now that alsa code is part of the driver, it can be compiled
only if alsa is enabled.
drivers/built-in.o: In function `snd_usbtv_hw_free':
>> usbtv-audio.c:(.text+0x21eb55): undefined reference to `snd_pcm_lib_free_pages'
drivers/built-in.o: In function `snd_usbtv_hw_params':
>> usbtv-audio.c:(.text+0x21eb72): undefined reference to `snd_pcm_lib_malloc_pages'
drivers/built-in.o: In function `usbtv_audio_urb_received':
>> usbtv-audio.c:(.text+0x21ed66): undefined reference to `snd_pcm_link_rwlock'
>> usbtv-audio.c:(.text+0x21ed9f): undefined reference to `snd_pcm_link_rwlock'
>> usbtv-audio.c:(.text+0x21edf5): undefined reference to `snd_pcm_period_elapsed'
drivers/built-in.o: In function `usbtv_audio_init':
>> (.text+0x21f00a): undefined reference to `snd_card_new'
drivers/built-in.o: In function `usbtv_audio_init':
>> (.text+0x21f0a2): undefined reference to `snd_pcm_new'
drivers/built-in.o: In function `usbtv_audio_init':
>> (.text+0x21f0e5): undefined reference to `snd_pcm_set_ops'
drivers/built-in.o: In function `usbtv_audio_init':
>> (.text+0x21f103): undefined reference to `snd_pcm_lib_preallocate_pages_for_all'
drivers/built-in.o: In function `usbtv_audio_init':
>> (.text+0x21f10c): undefined reference to `snd_card_register'
drivers/built-in.o: In function `usbtv_audio_init':
>> (.text+0x21f12a): undefined reference to `snd_card_free'
drivers/built-in.o: In function `usbtv_audio_free':
>> (.text+0x21f15c): undefined reference to `snd_card_free'
>> drivers/built-in.o:(.data+0x43250): undefined reference to `snd_pcm_lib_ioctl'
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
au0828 doesn't resume correctly and TV tuning fails with
xc_set_signal_source(0) failed message. Change au0828 dvb
suspend and resume interfaces to suspend and resume frontend
during suspend and resume respectively. dvb_frontend_suspend()
suspends tuner and fe using tuner and fe ops. dvb_frontend_resume()
resumes fe and tuner using fe and tuner ops ini before waking up
the frontend. With this change HVR950Q suspend and resume work
when system gets suspended when digital function is tuned to a
channel and with active TV stream, and after resume it went right
back to active TV stream.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The correct field order in progressive mode is V4L2_FIELD_NONE, not V4L2_FIELD_INTERLACED.
Cc: <stable@vger.kernel.org>
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
When a new video frame is started, the driver takes the next video buffer from
the list of active buffers and moves it to dev->usb_ctl.vid_buf / dev->usb_ctl.vbi_buf
for further processing.
On streaming stop we currently only give back the pending buffers from the list
but not the ones which are currently processed.
This causes the following warning from the vb2 core since kernel 3.15:
...
------------[ cut here ]------------
WARNING: CPU: 1 PID: 2284 at drivers/media/v4l2-core/videobuf2-core.c:2115 __vb2_queue_cancel+0xed/0x150 [videobuf2_core]()
[...]
Call Trace:
[<c0769c46>] dump_stack+0x48/0x69
[<c0245b69>] warn_slowpath_common+0x79/0x90
[<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core]
[<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core]
[<c0245bfd>] warn_slowpath_null+0x1d/0x20
[<f925e4ad>] __vb2_queue_cancel+0xed/0x150 [videobuf2_core]
[<f925fa35>] vb2_internal_streamoff+0x35/0x90 [videobuf2_core]
[<f925fac5>] vb2_streamoff+0x35/0x60 [videobuf2_core]
[<f925fb27>] vb2_ioctl_streamoff+0x37/0x40 [videobuf2_core]
[<f8e45895>] v4l_streamoff+0x15/0x20 [videodev]
[<f8e4925d>] __video_do_ioctl+0x23d/0x2d0 [videodev]
[<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev]
[<f8e48c63>] video_usercopy+0x203/0x5a0 [videodev]
[<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev]
[<c039d0e7>] ? fsnotify+0x1e7/0x2b0
[<f8e49012>] video_ioctl2+0x12/0x20 [videodev]
[<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev]
[<f8e4461e>] v4l2_ioctl+0xee/0x130 [videodev]
[<f8e44530>] ? v4l2_open+0xf0/0xf0 [videodev]
[<c0378de2>] do_vfs_ioctl+0x2e2/0x4d0
[<c0368eec>] ? vfs_write+0x13c/0x1c0
[<c0369a8f>] ? vfs_writev+0x2f/0x50
[<c0379028>] SyS_ioctl+0x58/0x80
[<c076fff3>] sysenter_do_call+0x12/0x12
---[ end trace 5545f934409f13f4 ]---
...
Many thanks to Hans Verkuil, whose recently added check in the vb2 core unveiled
this long standing issue and who has investigated it further.
Cc: <stable@vger.kernel.org>
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Add an ALSA handler inside usbtv module, in order to make
audio to work with those devices.
Signed-off-by: Federico Simoncelli <fsimonce@redhat.com>
Tested-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Remove the dependencies of as102_cmd from as102, in order to
allow it to be compiled as a separate module.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This function just converts from the as10x internal data into
the DVBv5 cache. Get rid of it.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This function just parses the frontend cache and converts
to the as102 internal format message. Get rid of it.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Avoid having function prototypes by moving some
ancillary routines to the beginning of the file.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This driver is stable and doesn't contain any really serious
issue. Move it out of staging.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Add support for PCTV microStick (77e) device that uses a sms1140
chipset.
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
When DVB is streaming and suspend is called, it will call
au0828_stop_transport(), with will clean the streaming flag.
Due to that, stop_urb_transfer() will be called twice,
causing an oops.
So, we need another flag to be used at resume, telling it
to restart DVB.
While here, add a logic at stop_urb_transfer() to prevent
it of being called twice, and convert the usb_streaming
flag into boolean.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
dev->dvb is always not null, as it is an area at the dev
memory. So, checking if (dev->dvb) is always true.
Instead of this stupid check, what the code wants to do is
to know if the DVB was successully registered.
Fix it by checking, instead, for dvb->frontend. It should
also be sure that this var will be NULL if the device was
not properly initialized.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Suspend/resume conditions can be very tricky. Add some info
printk's to help tracking what's happening there.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Instead of using printk(KERN_foo, use pr_foo() macros.
No functional changes.
Note: we should do the same for dprintk(), but that would
require to remove the dprintk levels. So, for now, let's
not touch on it.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
No timers should be enabled during suspend. So,
stop them. At resume time, we should do the proper
initialization for it to keep working.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The STREAM_ON state is used by s_format callback,
but the driver never sets it.
Fix it. This will also be needed in order to handle
suspend/resume ops.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The scheduled work should be cancelled during suspend.
At resume time, we need to set the frontend again. So,
add such logic to the driver.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
At resume, we should restore the register contents. So,
reenable the bridge and GPIO settings.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Trying to make au0828 to suspend can do very bad things, as
the polling Kthread is not handled. We should disable it
during suspend, only re-enabling it at resume.
Still, analog and digital TV won't work, as we don't reinit
the settings at resume, but at least it won't hang.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Define au0828_rc_*() stubs to avoid compile errors when
VIDEO_AU0828_RC is disabled and avoid the need to enclose
au0828_rc_*() in ifdef CONFIG_VIDEO_AU0828_RC in .c files.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
It doesn't make sense to handle an IR code given before
suspending after the device resume. So, turn off IR
int while suspending.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
As the RC kthread can re-enable IR int, we should first
cancel the kthread and then disable IR int.
While here, remove a temporary debug printk.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
When the DVB code sets the frontend, it disables the IR
INT, probably due to some hardware bug, as there's no code
there at au8522 frontend that writes on register 0xe0.
Fixing it at au8522 code is hard, as it doesn't know if the
IR is enabled or disabled, and just restoring the value of
register 0xe0 could cause other nasty effects. So, better
to add a hack at au0828-input polling interval to enable int,
if disabled.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The IR code increases the power consumption of the device.
Allow to disable it via modprobe parameter.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This sleep was doing some debouncing on the original driver.
This is not needed on Linux, because the RC core and the input
layer already takes care of it.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Mauro Carvalho Chehab