Commit Graph

132 Commits

Author SHA1 Message Date
Chao Yu 70cfed88ef f2fs: avoid skipping recover_inline_xattr after recover_inline_data
When we recover data of inode in roll-forward procedure, and the inode has both
inline data and inline xattr. We may skip recovering inline xattr if we recover
inline data form node page first.
This patch will fix the problem that we lost inline xattr data in above
scenario.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-02 07:43:51 -07:00
Chao Yu b3582c6892 f2fs: reduce competition among node page writes
We do not need to block on ->node_write among different node page writers e.g.
fsync/flush, unless we have a node page writer from write_checkpoint.
So it's better use rw_semaphore instead of mutex type for ->node_write to
promote performance.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-07-30 23:28:37 -07:00
Chao Yu aec71382c6 f2fs: refactor flush_nat_entries codes for reducing NAT writes
Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
   nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
   journal is full, then flush the left dirty entries to disk without merge
   journaled entries, so these journaled entries may be flushed to disk at next
   checkpoint but lost chance to flushed last time.

In this patch we merge dirty entries located in same NAT block to nat entry set,
and linked all set to list, sorted ascending order by entries' count of set.
Later we flush entries in sparse set into journal as many as we can, and then
flush merged entries to disk. In this way we can not only gain in performance,
but also save lifetime of flash device.

In my testing environment, it shows this patch can help to reduce NAT block
writes obviously. In hard disk test case: cost time of fsstress is stablely
reduced by about 5%.

1. virtual machine + hard disk:
fsstress -p 20 -n 200 -l 5
		node num	cp count	nodes/cp
based		4599.6		1803.0		2.551
patched		2714.6		1829.6		1.483

2. virtual machine + 32g micro SD card:
fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0
-f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5
-f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S

		node num	cp count	nodes/cp
based		84.5		43.7		1.933
patched		49.2		40.0		1.23

Our latency of merging op shows not bad when handling extreme case like:
merging a great number of dirty nats:
latency(ns)	dirty nat count
3089219		24922
5129423		27422
4000250		24523

change log from v1:
 o fix wrong logic in add_nat_entry when grab a new nat entry set.
 o swith to create slab cache in create_node_manager_caches.
 o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency.

change log from v2:
 o make comment position more appropriate suggested by Jaegeuk Kim.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-07-09 14:04:25 -07:00
Jaegeuk Kim a014e037be f2fs: clean up an unused parameter and assignment
This patch cleans up simple unnecessary codes.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-07-09 14:04:25 -07:00
Jaegeuk Kim 2743f86554 f2fs: check bdi->dirty_exceeded when trying to skip data writes
If we don't check the current backing device status, balance_dirty_pages can
fall into infinite pausing routine.

This can be occurred when a lot of directories make a small number of dirty
dentry pages including files.

Reported-by: Brian Chadwick <brianchad@westnet.com.au>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-07-09 05:59:45 -07:00
Linus Torvalds 64b2d1fbbf f2fs updates for v3.16
This patch-set includes the following major enhancement patches.
  o enhance wait_on_page_writeback
  o support SEEK_DATA and SEEK_HOLE
  o enhance readahead flows
  o enhance IO flushes
  o support fiemap
  o add some tracepoints
 
 The other bug fixes are as follows.
  o fix to support a large volume > 2TB correctly
  o recovery bug fix wrt fallocated space
  o fix recursive lock on xattr operations
  o fix some cases on the remount flow
 
 And, there are a bunch of cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTleLYAAoJEEAUqH6CSFDSdhEP/iY5hTZ02jH4ZiFPP/Nee4hS
 l0BHeZvrMjoccaWUDu0ZvIPC8BiJ7kLOgK+/VWS7LAfY1PY11ALEtYQOrW+RM47+
 jMfULegTod/F8WS2B6dk31QMhAZldtnsYvA5PS1VV3S0rht+qbOz+PDejZFgSMc3
 VVQ7OZzq30gMmtsw7oh3FHfeTu4xe/bxygdMRXgljQQD2MvorJiOb4MA+ovEDd9z
 CZMMTQvRKjc0d8LPf0gOkZEvG63GR6klCgFMuiappUsua0O8IPIEhCyEGFrE66vS
 fObVKpqNAsR2ABhS2grgn6Q7UUvn4xrF6jOwDH5tuw2yzmkQiMAWINwBdgnbEy1c
 D5S89PQ8TkQK9KBSoU0v8WKWC4HzWZF4ZEd6eq9VxVTS8iT0w8DtNHXK518FVC34
 82iqrLc0EhrcGNiW/7Nrc6WzHrWqorylCFN7atB3ruhVqeMh3MZsDU4Gq0WgB2oh
 pF9XVBEpJQpV35DYSAPzLkm+2+mwHVNqwdY3HcvUs7IP90+wZlrWSRG2FEfFt/e8
 6nwvbORrHMTI5VfdYlEPgpjuesFmYPZqEvRGdaDa1YrHqhvvgStEPT9qiq2qVn9+
 tr0HjpNRDD/etkaE6ujYOYqdxuk3mm6RY68h+KSbNcY1/VTvt2bN2telwWuDsxIq
 8yOsxV2x3JB/euDAJsSU
 =xqsO
 -----END PGP SIGNATURE-----

Merge tag 'for-f2fs-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

Pull f2fs updates from Jaegeuk Kim:
 "In this round, there is no special interesting feature, but we've
  investigated a couple of tuning points with respect to the I/O flow.
  Several major bug fixes and a bunch of clean-ups also have been made.

  This patch-set includes the following major enhancement patches:
   - enhance wait_on_page_writeback
   - support SEEK_DATA and SEEK_HOLE
   - enhance readahead flows
   - enhance IO flushes
   - support fiemap
   - add some tracepoints

  The other bug fixes are as follows:
   - fix to support a large volume > 2TB correctly
   - recovery bug fix wrt fallocated space
   - fix recursive lock on xattr operations
   - fix some cases on the remount flow

  And, there are a bunch of cleanups"

* tag 'for-f2fs-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits)
  f2fs: support f2fs_fiemap
  f2fs: avoid not to call remove_dirty_inode
  f2fs: recover fallocated space
  f2fs: fix to recover data written by dio
  f2fs: large volume support
  f2fs: avoid crash when trace f2fs_submit_page_mbio event in ra_sum_pages
  f2fs: avoid overflow when large directory feathure is enabled
  f2fs: fix recursive lock by f2fs_setxattr
  MAINTAINERS: add a co-maintainer from samsung for F2FS
  MAINTAINERS: change the email address for f2fs
  f2fs: use inode_init_owner() to simplify codes
  f2fs: avoid to use slab memory in f2fs_issue_flush for efficiency
  f2fs: add a tracepoint for f2fs_read_data_page
  f2fs: add a tracepoint for f2fs_write_{meta,node,data}_pages
  f2fs: add a tracepoint for f2fs_write_{meta,node,data}_page
  f2fs: add a tracepoint for f2fs_write_end
  f2fs: add a tracepoint for f2fs_write_begin
  f2fs: fix checkpatch warning
  f2fs: deactivate inode page if the inode is evicted
  f2fs: decrease the lock granularity during write_begin
  ...
2014-06-09 19:11:44 -07:00
Mel Gorman 2457aec637 mm: non-atomically mark page accessed during page cache allocation where possible
aops->write_begin may allocate a new page and make it visible only to have
mark_page_accessed called almost immediately after.  Once the page is
visible the atomic operations are necessary which is noticable overhead
when writing to an in-memory filesystem like tmpfs but should also be
noticable with fast storage.  The objective of the patch is to initialse
the accessed information with non-atomic operations before the page is
visible.

The bulk of filesystems directly or indirectly use
grab_cache_page_write_begin or find_or_create_page for the initial
allocation of a page cache page.  This patch adds an init_page_accessed()
helper which behaves like the first call to mark_page_accessed() but may
called before the page is visible and can be done non-atomically.

The primary APIs of concern in this care are the following and are used
by most filesystems.

	find_get_page
	find_lock_page
	find_or_create_page
	grab_cache_page_nowait
	grab_cache_page_write_begin

All of them are very similar in detail to the patch creates a core helper
pagecache_get_page() which takes a flags parameter that affects its
behavior such as whether the page should be marked accessed or not.  Then
old API is preserved but is basically a thin wrapper around this core
function.

Each of the filesystems are then updated to avoid calling
mark_page_accessed when it is known that the VM interfaces have already
done the job.  There is a slight snag in that the timing of the
mark_page_accessed() has now changed so in rare cases it's possible a page
gets to the end of the LRU as PageReferenced where as previously it might
have been repromoted.  This is expected to be rare but it's worth the
filesystem people thinking about it in case they see a problem with the
timing change.  It is also the case that some filesystems may be marking
pages accessed that previously did not but it makes sense that filesystems
have consistent behaviour in this regard.

The test case used to evaulate this is a simple dd of a large file done
multiple times with the file deleted on each iterations.  The size of the
file is 1/10th physical memory to avoid dirty page balancing.  In the
async case it will be possible that the workload completes without even
hitting the disk and will have variable results but highlight the impact
of mark_page_accessed for async IO.  The sync results are expected to be
more stable.  The exception is tmpfs where the normal case is for the "IO"
to not hit the disk.

The test machine was single socket and UMA to avoid any scheduling or NUMA
artifacts.  Throughput and wall times are presented for sync IO, only wall
times are shown for async as the granularity reported by dd and the
variability is unsuitable for comparison.  As async results were variable
do to writback timings, I'm only reporting the maximum figures.  The sync
results were stable enough to make the mean and stddev uninteresting.

The performance results are reported based on a run with no profiling.
Profile data is based on a separate run with oprofile running.

async dd
                                    3.15.0-rc3            3.15.0-rc3
                                       vanilla           accessed-v2
ext3    Max      elapsed     13.9900 (  0.00%)     11.5900 ( 17.16%)
tmpfs	Max      elapsed      0.5100 (  0.00%)      0.4900 (  3.92%)
btrfs   Max      elapsed     12.8100 (  0.00%)     12.7800 (  0.23%)
ext4	Max      elapsed     18.6000 (  0.00%)     13.3400 ( 28.28%)
xfs	Max      elapsed     12.5600 (  0.00%)      2.0900 ( 83.36%)

The XFS figure is a bit strange as it managed to avoid a worst case by
sheer luck but the average figures looked reasonable.

        samples percentage
ext3       86107    0.9783  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
ext3       23833    0.2710  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
ext3        5036    0.0573  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
ext4       64566    0.8961  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
ext4        5322    0.0713  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
ext4        2869    0.0384  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
xfs        62126    1.7675  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
xfs         1904    0.0554  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
xfs          103    0.0030  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
btrfs      10655    0.1338  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
btrfs       2020    0.0273  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
btrfs        587    0.0079  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
tmpfs      59562    3.2628  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
tmpfs       1210    0.0696  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
tmpfs         94    0.0054  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed

[akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:10 -07:00
Jaegeuk Kim b6fe5873cb f2fs: fix to recover data written by dio
If data are overwritten through dio, previous f2fs doesn't remain the fsync mark
due to no additional node writes.

Note that this patch should resolve the xfstests:311.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-04 18:41:38 +09:00
Chao Yu bac4eef653 f2fs: avoid crash when trace f2fs_submit_page_mbio event in ra_sum_pages
Previously we allocate pages with no mapping in ra_sum_pages(), so we may
encounter a crash in event trace of f2fs_submit_page_mbio where we access
mapping data of the page.

We'd better allocate pages in bd_inode mapping and invalidate these pages after
we restore data from pages. It could avoid crash in above scenario.

Changes from V1
 o remove redundant code in ra_sum_pages() suggested by Jaegeuk Kim.

Call Trace:
 [<f1031630>] ? ftrace_raw_event_f2fs_write_checkpoint+0x80/0x80 [f2fs]
 [<f10377bb>] f2fs_submit_page_mbio+0x1cb/0x200 [f2fs]
 [<f103c5da>] restore_node_summary+0x13a/0x280 [f2fs]
 [<f103e22d>] build_curseg+0x2bd/0x620 [f2fs]
 [<f104043b>] build_segment_manager+0x1cb/0x920 [f2fs]
 [<f1032c85>] f2fs_fill_super+0x535/0x8e0 [f2fs]
 [<c115b66a>] mount_bdev+0x16a/0x1a0
 [<f102f63f>] f2fs_mount+0x1f/0x30 [f2fs]
 [<c115c096>] mount_fs+0x36/0x170
 [<c1173635>] vfs_kern_mount+0x55/0xe0
 [<c1175388>] do_mount+0x1e8/0x900
 [<c1175d72>] SyS_mount+0x82/0xc0
 [<c16059cc>] sysenter_do_call+0x12/0x22

Suggested-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-04 13:34:30 +09:00
Chao Yu e574843438 f2fs: add a tracepoint for f2fs_write_{meta,node,data}_pages
This patch adds a tracepoint for f2fs_write_{meta,node,data}_pages to trace when
pages are fsyncing/flushing.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:59 +09:00
Chao Yu ecda0de343 f2fs: add a tracepoint for f2fs_write_{meta,node,data}_page
This patch adds a tracepoint for f2fs_write_{meta,node,data}_page to trace when
page is writting out.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:59 +09:00
Jaegeuk Kim 54b591dfda f2fs: split grab_cache_page and wait_on_page_writeback for node pages
This patch splits grab_cache_page_write_begin into grab_cache_page and
wait_on_page_writeback for node pages.

This patch intends to enhance the latency to get node pages by alleviating
unnecessary wait_on_page_writeback.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:58 +09:00
Jaegeuk Kim 6fb03f3a40 f2fs: adjust free mem size to flush dentry blocks
If so many dirty dentry blocks are cached, not reached to the flush condition,
we should fall into livelock in balance_dirty_pages.
So, let's consider the mem size for the condition.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:55 +09:00
Jaegeuk Kim e8271fa390 f2fs: avoid BUG_ON when mouting corrupted image having garbage blocks
If the disk has some garbage blocks, F2FS is able to face with BUG_ON when
recovering direct node blocks.
This patch detects the error case and avoids that prior to reaching BUG_ON.

Alexey Khoroshilov addressed the potential security issues as follows.
"An ability to trigger a BUG_ON assert by mounting a crafted image is
usually considered as a local denial of service [1-3]. As far as I
understand, the reason is that some kernel data may become inconsistent
that can lead to further problems.

[1] http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-3353
[2] http://www.openwall.com/lists/oss-security/2011/06/24/4
[3] http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-2928
etc."

Reported-by: Andrey Tsyvarev <tsyvarev@ispras.ru>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:55 +09:00
Jaegeuk Kim 7ee0eeabcd f2fs: add available_nids to fix handling max_nid correctly
This patch introduces available_nids for alloc_nids() and fixes max_nid for
build_free_nids() and scan_nat_pages().

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:55 +09:00
Chao Yu 94dac22e72 f2fs: introduce raw_nat_from_node_info() to simplfy codes
This patch introduce raw_nat_from_node_info() to simplfy some codes, and also
use exist function node_info_from_raw_nat() to do the same job.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:55 +09:00
Jingoo Han b156d54241 f2fs: make recover_inline_xattr() static
Make recover_inline_xattr() static, because this function is
used only in this file.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:54 +09:00
Jaegeuk Kim 76f60268e7 f2fs: call redirty_page_for_writepage
This patch replace some general codes with redirty_page_for_writepage, which
can be enabled after consideration on additional procedure like counting dirty
pages appropriately.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:54 +09:00
Chao Yu 2d7b822ad9 f2fs: use list_for_each_entry{_safe} for simplyfying code
This patch use list_for_each_entry{_safe} instead of list_for_each{_safe} for
simplfying code.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-04-02 09:56:27 +09:00
Chao Yu cf0ee0f09b f2fs: avoid free slab cache under spinlock
Move kmem_cache_free out of spinlock protection region for better performance.

Change log from v1:
 o remove spinlock protection for kmem_cache_free in destroy_node_manager
suggested by Jaegeuk Kim.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-04-02 09:56:12 +09:00
Jaegeuk Kim 3bb5e2c8fe f2fs: return -EIO when node id is not matched
During the cleaing of node segments, F2FS can get errored node blocks due to
data race between node page lock and its valid bitmap operations.
In that case, it needs to return an error to skip such the obsolete block copy.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-04-01 17:38:26 +09:00
Jaegeuk Kim 479f40c44a f2fs: skip unnecessary node writes during fsync
If multiple redundant fsync calls are triggered, we don't need to write its
node pages with fsync mark continuously.

So, this patch adds FI_NEED_FSYNC to track whether the latest node block is
written with the fsync mark or not.
If the mark was set, a new fsync doesn't need to write a node block.
Otherwise, we should do a new node block with the mark for roll-forward
recovery.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-20 22:10:11 +09:00
Jaegeuk Kim a5f420101d f2fs: remove unnecessary threshold
The NM_WOUT_THRESHOLD is now obsolete since f2fs starts to control on a basis
of the memory footprint.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-20 22:10:09 +09:00
Jaegeuk Kim cdfc41c134 f2fs: throttle the memory footprint with a sysfs entry
This patch introduces ram_thresh, a sysfs entry, which controls the memory
footprint used by the free nid list and the nat cache.

Previously, the free nid list was controlled by MAX_FREE_NIDS, while the nat
cache was managed by NM_WOUT_THRESHOLD.
However, this approach cannot be applied dynamically according to the system.

So, this patch adds ram_thresh that users can specify the threshold, which is
in order of 1 / 1024.
For example, if the total ram size is 4GB and the value is set to 10 by default,
f2fs tries to control the number of free nids and nat caches not to consume over
10 * (4GB / 1024) = 10MB.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-20 22:10:09 +09:00
Jaegeuk Kim 40bb0058c8 f2fs: avoid to drop nat entries due to the negative nr_shrink
The try_to_free_nats should not receive the negative nr_shrink.
Otherwise, it can drop all the nat entries by the while loop.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-20 22:10:08 +09:00
Jaegeuk Kim 3cb5ad152b f2fs: call f2fs_wait_on_page_writeback instead of native function
If a page is on writeback, f2fs can face with deadlock due to under writepages.
This is caused by merging IOs inside f2fs, so if it comes to detect, let's throw
merged IOs, which is implemented by f2fs_wait_on_page_writeback.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-20 22:10:04 +09:00
Jaegeuk Kim 50c8cdb35a f2fs: introduce nr_pages_to_write for segment alignment
This patch introduces nr_pages_to_write to align page writes to the segment
or other operational unit size, which can be tuned according to the system
environment.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-18 16:37:53 +09:00
Jaegeuk Kim d3baf95da5 f2fs: increase pages_skipped when skipping writepages
This patch increases pages_skipped when skipping writepages.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-18 16:37:16 +09:00
Jaegeuk Kim 87d6f89094 f2fs: avoid small data writes by skipping writepages
This patch introduces nr_pages_to_skip(sbi, type) to determine writepages can
be skipped.
The dentry, node, and meta pages can be conrolled by F2FS without breaking the
FS consistency.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-18 13:58:59 +09:00
Chao Yu 4bc8e9bcf5 f2fs: introduce f2fs_has_xattr_block for better readability
This patch introduces a help function f2fs_has_xattr_block for better
readability.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-18 09:29:46 +09:00
Chao Yu 987c7c3112 f2fs: introduce f2fs_has_inline_xattr for better readability
This patch introduces a help function f2fs_has_inline_xattr for better
readability.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-12 17:23:35 +09:00
Chao Yu 28cdce0459 f2fs: recover inline xattr data in roll-forward process
Previously we do not recover inline xattr data of inode after power-cut, so
inline xattr data may be lost.
We should recover the data during the roll-forward process.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-11 16:31:06 +09:00
Gu Zheng d653788a43 f2fs: optimize restore_node_summary slightly
Previously, we ra_sum_pages to pre-read contiguous pages as more
as possible, and if we fail to alloc more pages, an ENOMEM error
will be reported upstream, even though we have alloced some pages
yet. In fact, we can use the available pages to do the job partly,
and continue the rest in the following circle. Only reporting ENOMEM
upstream if we really can not alloc any available page.

And another fix is ignoring dealing with the following pages if an
EIO occurs when reading page from page_list.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: modify the flow for better neat code]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-10 18:45:15 +09:00
Gu Zheng e8512d2e0c f2fs: remove the unused ctor argument of f2fs_kmem_cache_create()
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-10 18:45:14 +09:00
Gu Zheng b6ce391e61 f2fs: update start nid only once each circle
Integrated a couple of minor changes for better readability suggested by
Chao Yu.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-10 18:45:09 +09:00
Chao Yu 9cf3c3898a f2fs: fix dirty page accounting when redirty
We should de-account dirty counters for page when redirty in ->writepage().

Wu Fengguang described in 'commit 971767caf632190f77a40b4011c19948232eed75':
"writeback: fix dirtied pages accounting on redirty
De-account the accumulative dirty counters on page redirty.

Page redirties (very common in ext4) will introduce mismatch between
counters (a) and (b)

a) NR_DIRTIED, BDI_DIRTIED, tsk->nr_dirtied
b) NR_WRITTEN, BDI_WRITTEN

This will introduce systematic errors in balanced_rate and result in
dirty page position errors (ie. the dirty pages are no longer balanced
around the global/bdi setpoints)."

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-02-28 13:09:08 +09:00
Jaegeuk Kim 8a7ed66aaf f2fs: introduce a radix_tree for the free_nid list
This patch introduces a radix tree for the list of free_nids, which enhances
the performance on free nid management.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-02-24 16:00:41 +09:00
Gu Zheng f978f5a061 f2fs: introduce help macro on_build_free_nids()
Introduce help macro on_build_free_nids() which just uses build_lock
to judge whether the building free nid is going, so that we can remove
the on_build_free_nids field from f2fs_sb_info.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
[Jaegeuk Kim: remove an unnecessary white line removal]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-02-24 16:00:40 +09:00
Jaegeuk Kim fffc2a00fc f2fs: fix to mark the checkpointed nat entry correctly
The nat cache entry maintains a status whether it is checkpointed or not.
So, if a new cache entry is loaded from the last checkpoint,
nat_entry->checkpointed should be true.
If the cache entry is modified as being dirty, nat_entry->checkpoint should
be false.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-02-24 16:00:40 +09:00
Jaegeuk Kim b63da15e8b f2fs: fix the calculation of max_nids
Total nids that f2fs can use should not include 0, nid for node inode, and nid
for meta inode.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-02-17 14:58:53 +09:00
Chao Yu 662befda25 f2fs: introduce ra_meta_pages to readahead CP/NAT/SIT pages
This patch help us to cleanup the readahead code by merging ra_{sit,nat}_pages
function into ra_meta_pages.
Additionally the new function is used to readahead cp block in
recover_orphan_inodes.

Change log from v1:
 o fix a deadloop bug pointed by Jaegeuk Kim.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-02-17 14:58:53 +09:00
Jaegeuk Kim abb2366c82 f2fs: fix to recover xattr node block
If a new xattr node page was allocated and its inode is fsynced, we should
recover the xattr node page during the roll-forward process after power-cut.
But, previously, f2fs didn't handle that case, resulting in kernel panic as
follows reported by Tom Li.

BUG: unable to handle kernel paging request at ffffc9001c861a98
IP: [<ffffffffa0295236>] check_index_in_prev_nodes+0x86/0x2d0 [f2fs]
Call Trace:
 [<ffffffff815ece9b>] ? printk+0x48/0x4a
 [<ffffffffa029626a>] recover_fsync_data+0xdca/0xf50 [f2fs]
 [<ffffffffa02873ae>] f2fs_fill_super+0x92e/0x970 [f2fs]
 [<ffffffff8112c9f8>] mount_bdev+0x1b8/0x200
 [<ffffffffa0286a80>] ? f2fs_remount+0x130/0x130 [f2fs]
 [<ffffffffa0285e40>] f2fs_mount+0x10/0x20 [f2fs]
 [<ffffffff8112d4de>] mount_fs+0x3e/0x1b0
 [<ffffffff810ef4eb>] ? __alloc_percpu+0xb/0x10
 [<ffffffff8114761f>] vfs_kern_mount+0x6f/0x120
 [<ffffffff811497b9>] do_mount+0x259/0xa90
 [<ffffffff810ead1d>] ? memdup_user+0x3d/0x80
 [<ffffffff810eadb3>] ? strndup_user+0x53/0x70
 [<ffffffff8114a2c9>] SyS_mount+0x89/0xd0
 [<ffffffff815feae2>] system_call_fastpath+0x16/0x1b

This patch adds a recovery function of xattr node pages.

Reported-by: Tom Li <biergaizi@members.fsf.org>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-02-17 14:58:52 +09:00
Jaegeuk Kim bf39c00a9a f2fs: drop obsolete node page when it is truncated
If a node page is trucated, we'd better drop the page in the node_inode's page
cache for better memory footprint.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-23 08:04:21 +09:00
Jaegeuk Kim 4ef51a8fcc f2fs: introduce NODE_MAPPING for code consistency
This patch adds NODE_MAPPING which is similar as META_MAPPING introduced by
Gu Zheng.

Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-22 18:41:08 +09:00
Gu Zheng 9df27d982d f2fs: add help function META_MAPPING
Introduce help function META_MAPPING() to get the cache meta blocks'
address space.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-22 18:41:07 +09:00
Chris Fries 6c311ec6c2 f2fs: clean checkpatch warnings
Fixed a variety of trivial checkpatch warnings.  The only delta should
be some minor formatting on log strings that were split / too long.

Signed-off-by: Chris Fries <cfries@motorola.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-20 10:27:12 +09:00
Jaegeuk Kim fb5566da91 f2fs: improve write performance under frequent fsync calls
When considering a bunch of data writes with very frequent fsync calls, we
are able to think the following performance regression.

N: Node IO, D: Data IO, IO scheduler: cfq

Issue    pending IOs
	 D1 D2 D3 D4
 D1         D2 D3 D4 N1
 D2            D3 D4 N1 N2
 N1            D3 D4 N2 D1
 --> N1 can be selected by cfq becase of the same priority of N and D.
     Then D3 and D4 would be delayed, resuling in performance degradation.

So, when processing the fsync call, it'd better give higher priority to data IOs
than node IOs by assigning WRITE and WRITE_SYNC respectively.
This patch improves the random wirte performance with frequent fsync calls by up
to 10%.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-08 11:16:20 +09:00
shifei10.ge a225dca394 f2fs: fix truncate_partial_nodes bug
The truncate_partial_nodes puts pages incorrectly in the following two cases.
Note that the value for argc 'depth' can only be 2 or 3.
Please see truncate_inode_blocks() and truncate_partial_nodes().

1) An err is occurred in the first 'for' loop
  When err is occurred with depth = 2, pages[0] is invalid, so this page doesn't
  need to be put. There is no problem, however, when depth is 3, it doesn't put
  the pages correctly where pages[0] is valid and pages[1] is invalid.
  In this case, depth is set to 2 (ref to statemnt depth = i + 1), and then
  'goto fail'.
  In label 'fail', for (i = depth - 3; i >= 0; i--) cannot meet the condition
  because i = -1, so pages[0] cann't be put.

2) An err happened in the second 'for' loop
  Now we've got pages[0] with depth = 2, or we've got pages[0] and pages[1]
  with depth = 3. When an err is detected, we need 'goto fail' to put such
  the pages.
  When depth is 2, in label 'fail', for (i = depth - 3; i >= 0; i--) cann't
  meet the condition because i = -1, so pages[0] cann't be put.
  When depth is 3, in label 'fail', for (i = depth - 3; i >= 0; i--) can
  only put pages[0], pages[1] also cann't be put.

Note that 'depth' has been changed before first 'goto fail' (ref to statemnt
depth = i + 1), so passing this modified 'depth' to the tracepoint,
trace_f2fs_truncate_partial_nodes, is also incorrect.

Signed-off-by: Shifei Ge <shifei10.ge@samsung.com>
[Jaegeuk Kim: modify the description and fix one bug]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-06 16:42:21 +09:00
Jaegeuk Kim 58bfaf44df f2fs: introduce F2FS_INODE macro to get f2fs_inode
This patch introduces F2FS_INODE that returns struct f2fs_inode * from the inode
page.
By using this macro, we can remove unnecessary casting codes like below.

   struct f2fs_inode *ri = &F2FS_NODE(inode_page)->i;
-> struct f2fs_inode *ri = F2FS_INODE(inode_page);

Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-26 20:32:48 +09:00
Chao Yu 4f4124d0b9 f2fs: update several comments
Update several comments:
1. use f2fs_{un}lock_op install of mutex_{un}lock_op.
2. update comment of get_data_block().
3. update description of node offset.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:26:03 +09:00