In preparation for exposing a low-level Poly1305 API which implements
the ε-almost-∆-universal (εA∆U) hash function underlying the Poly1305
MAC and supports block-aligned inputs only, create structures
poly1305_key and poly1305_state which hold the limbs of the Poly1305
"r" key and accumulator, respectively.
These structures could actually have the same type (e.g. poly1305_val),
but different types are preferable, to prevent misuse.
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the generic implementation of ChaCha20 has been refactored to
allow varying the number of rounds, add support for XChaCha12, which is
the XSalsa construction applied to ChaCha12. ChaCha12 is one of the
three ciphers specified by the original ChaCha paper
(https://cr.yp.to/chacha/chacha-20080128.pdf: "ChaCha, a variant of
Salsa20"), alongside ChaCha8 and ChaCha20. ChaCha12 is faster than
ChaCha20 but has a lower, but still large, security margin.
We need XChaCha12 support so that it can be used in the Adiantum
encryption mode, which enables disk/file encryption on low-end mobile
devices where AES-XTS is too slow as the CPUs lack AES instructions.
We'd prefer XChaCha20 (the more popular variant), but it's too slow on
some of our target devices, so at least in some cases we do need the
XChaCha12-based version. In more detail, the problem is that Adiantum
is still much slower than we're happy with, and encryption still has a
quite noticeable effect on the feel of low-end devices. Users and
vendors push back hard against encryption that degrades the user
experience, which always risks encryption being disabled entirely. So
we need to choose the fastest option that gives us a solid margin of
security, and here that's XChaCha12. The best known attack on ChaCha
breaks only 7 rounds and has 2^235 time complexity, so ChaCha12's
security margin is still better than AES-256's. Much has been learned
about cryptanalysis of ARX ciphers since Salsa20 was originally designed
in 2005, and it now seems we can be comfortable with a smaller number of
rounds. The eSTREAM project also suggests the 12-round version of
Salsa20 as providing the best balance among the different variants:
combining very good performance with a "comfortable margin of security".
Note that it would be trivial to add vanilla ChaCha12 in addition to
XChaCha12. However, it's unneeded for now and therefore is omitted.
As discussed in the patch that introduced XChaCha20 support, I
considered splitting the code into separate chacha-common, chacha20,
xchacha20, and xchacha12 modules, so that these algorithms could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds. The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".
The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same. Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.
Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx). The generic code then passes the round count through to
chacha_block(). There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same. I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the XChaCha20 stream cipher. XChaCha20 is the
application of the XSalsa20 construction
(https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than
to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or
96 bits, depending on convention) to 192 bits, while provably retaining
ChaCha20's security. XChaCha20 uses the ChaCha20 permutation to map the
key and first 128 nonce bits to a 256-bit subkey. Then, it does the
ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce.
We need XChaCha support in order to add support for the Adiantum
encryption mode. Note that to meet our performance requirements, we
actually plan to primarily use the variant XChaCha12. But we believe
it's wise to first add XChaCha20 as a baseline with a higher security
margin, in case there are any situations where it can be used.
Supporting both variants is straightforward.
Since XChaCha20's subkey differs for each request, XChaCha20 can't be a
template that wraps ChaCha20; that would require re-keying the
underlying ChaCha20 for every request, which wouldn't be thread-safe.
Instead, we make XChaCha20 its own top-level algorithm which calls the
ChaCha20 streaming implementation internally.
Similar to the existing ChaCha20 implementation, we define the IV to be
the nonce and stream position concatenated together. This allows users
to seek to any position in the stream.
I considered splitting the code into separate chacha20-common, chacha20,
and xchacha20 modules, so that chacha20 and xchacha20 could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity of separate modules.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Refactor the unkeyed permutation part of chacha20_block() into its own
function, then add hchacha20_block() which is the ChaCha equivalent of
HSalsa20 and is an intermediate step towards XChaCha20 (see
https://cr.yp.to/snuffle/xsalsa-20081128.pdf). HChaCha20 skips the
final addition of the initial state, and outputs only certain words of
the state. It should not be used for streaming directly.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move CHACHAPOLY_IV_SIZE to header file, so it can be reused.
Signed-off-by: Cristian Stoica <cristian.stoica@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register Streebog hash function in Hash Info arrays to let IMA use
it for its purposes.
Cc: linux-integrity@vger.kernel.org
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The parsed BER/DER blob obtained from user space contains a TPM_Key
structure. This structure has some information about the key as well as
the public key portion.
This patch extracts this information for future use.
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
Put a flag in the public_key struct to indicate if the structure is holding
a private key. The private key must be held ASN.1 encoded in the format
specified in RFC 3447 A.1.2. This is the form required by crypto/rsa.c.
The software encryption subtype's verification and query functions then
need to select the appropriate crypto function to set the key.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Denis Kenzior <denkenz@gmail.com>
Tested-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Provide the missing asymmetric key subops for new key type ops. This
include query, encrypt, decrypt and create signature. Verify signature
already exists. Also provided are accessor functions for this:
int query_asymmetric_key(const struct key *key,
struct kernel_pkey_query *info);
int encrypt_blob(struct kernel_pkey_params *params,
const void *data, void *enc);
int decrypt_blob(struct kernel_pkey_params *params,
const void *enc, void *data);
int create_signature(struct kernel_pkey_params *params,
const void *data, void *enc);
The public_key_signature struct gains an encoding field to carry the
encoding for verify_signature().
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Denis Kenzior <denkenz@gmail.com>
Tested-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
sparse complains thusly:
CHECK arch/x86/crypto/morus640-sse2-glue.c
arch/x86/crypto/morus640-sse2-glue.c:38:1: warning: symbol 'crypto_morus640_sse2_algs' was not declared. Should it be static?
CHECK arch/x86/crypto/morus1280-sse2-glue.c
arch/x86/crypto/morus1280-sse2-glue.c:38:1: warning: symbol 'crypto_morus1280_sse2_algs' was not declared. Should it be static?
CHECK arch/x86/crypto/morus1280-avx2-glue.c
arch/x86/crypto/morus1280-avx2-glue.c:38:1: warning: symbol 'crypto_morus1280_avx2_algs' was not declared. Should it be static?
and sparse is correct - these don't need to be global and polluting the namespace.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch implement a generic way to get statistics about all crypto
usages.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that all the users of the VLA-generating SKCIPHER_REQUEST_ON_STACK()
macro have been moved to SYNC_SKCIPHER_REQUEST_ON_STACK(), we can remove
the former.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the quest to remove all stack VLA usage from the kernel[1], this
replaces struct crypto_skcipher and SKCIPHER_REQUEST_ON_STACK() usage
with struct crypto_sync_skcipher and SYNC_SKCIPHER_REQUEST_ON_STACK(),
which uses a fixed stack size.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for removal of VLAs due to skcipher requests on the stack
via SKCIPHER_REQUEST_ON_STACK() usage, this introduces the infrastructure
for the "sync skcipher" tfm, which is for handling the on-stack cases of
skcipher, which are always non-ASYNC and have a known limited request
size.
The crypto API additions:
struct crypto_sync_skcipher (wrapper for struct crypto_skcipher)
crypto_alloc_sync_skcipher()
crypto_free_sync_skcipher()
crypto_sync_skcipher_setkey()
crypto_sync_skcipher_get_flags()
crypto_sync_skcipher_set_flags()
crypto_sync_skcipher_clear_flags()
crypto_sync_skcipher_blocksize()
crypto_sync_skcipher_ivsize()
crypto_sync_skcipher_reqtfm()
skcipher_request_set_sync_tfm()
SYNC_SKCIPHER_REQUEST_ON_STACK() (with tfm type check)
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In commit 9f480faec5 ("crypto: chacha20 - Fix keystream alignment for
chacha20_block()"), I had missed that chacha20_block() can be called
directly on the buffer passed to get_random_bytes(), which can have any
alignment. So, while my commit didn't break anything, it didn't fully
solve the alignment problems.
Revert my solution and just update chacha20_block() to use
put_unaligned_le32(), so the output buffer need not be aligned.
This is simpler, and on many CPUs it's the same speed.
But, I kept the 'tmp' buffers in extract_crng_user() and
_get_random_bytes() 4-byte aligned, since that alignment is actually
needed for _crng_backtrack_protect() too.
Reported-by: Stephan Müller <smueller@chronox.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce a facility that can be used to receive a notification
callback when a new algorithm becomes available. This can be used by
existing crypto registrations to trigger a switch from a software-only
algorithm to a hardware-accelerated version.
A new CRYPTO_MSG_ALG_LOADED state is introduced to the existing crypto
notification chain, and the register/unregister functions are exported
so they can be called by subsystems outside of crypto.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As it turns out, the AVX2 multibuffer SHA routines are currently
broken [0], in a way that would have likely been noticed if this
code were in wide use. Since the code is too complicated to be
maintained by anyone except the original authors, and since the
performance benefits for real-world use cases are debatable to
begin with, it is better to drop it entirely for the moment.
[0] https://marc.info/?l=linux-crypto-vger&m=153476243825350&w=2
Suggested-by: Eric Biggers <ebiggers@google.com>
Cc: Megha Dey <megha.dey@linux.intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the quest to remove all stack VLA usage from the kernel[1], this
exposes a new general upper bound on crypto blocksize and alignmask
(higher than for the existing cipher limits) for VLA removal,
and introduces new checks.
At present, the highest cra_alignmask in the kernel is 63. The highest
cra_blocksize is 144 (SHA3_224_BLOCK_SIZE, 18 8-byte words). For the
new blocksize limit, I went with 160 (20 8-byte words).
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the quest to remove all stack VLA usage from the kernel[1], this
removes the VLAs in SHASH_DESC_ON_STACK (via crypto_shash_descsize())
by using the maximum allowable size (which is now more clearly captured
in a macro), along with a few other cases. Similar limits are turned into
macros as well.
A review of existing sizes shows that SHA512_DIGEST_SIZE (64) is the
largest digest size and that sizeof(struct sha3_state) (360) is the
largest descriptor size. The corresponding maximums are reduced.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the quest to remove all stack VLA usage from the kernel[1], this
uses the upper bounds on blocksize. Since this is always a cipher
blocksize, use the existing cipher max blocksize.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These are unused, undesired, and have never actually been used by
anybody. The original authors of this code have changed their mind about
its inclusion. While originally proposed for disk encryption on low-end
devices, the idea was discarded [1] in favor of something else before
that could really get going. Therefore, this patch removes Speck.
[1] https://marc.info/?l=linux-crypto-vger&m=153359499015659
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Cc: stable@vger.kernel.org
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
scatterwalk_samebuf() is never used. Remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All callers pass chain=0 to scatterwalk_crypto_chain().
Remove this unneeded parameter.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CTR DRBG requires two SGLs pointing to input/output buffers for the
CTR AES operation. The used SGLs always have only one entry. Thus, the
SGL can be initialized during allocation time, preventing a
re-initialization of the SGLs during each call.
The performance is increased by about 1 to 3 percent depending on the
size of the requested buffer size.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to SP800-56A section 5.6.2.1, the public key to be processed
for the DH operation shall be checked for appropriateness. The check
shall covers the full verification test in case the domain parameter Q
is provided as defined in SP800-56A section 5.6.2.3.1. If Q is not
provided, the partial check according to SP800-56A section 5.6.2.3.2 is
performed.
The full verification test requires the presence of the domain parameter
Q. Thus, the patch adds the support to handle Q. It is permissible to
not provide the Q value as part of the domain parameters. This implies
that the interface is still backwards-compatible where so far only P and
G are to be provided. However, if Q is provided, it is imported.
Without the test, the NIST ACVP testing fails. After adding this check,
the NIST ACVP testing passes. Testing without providing the Q domain
parameter has been performed to verify the interface has not changed.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
syzbot reported a crash in vmac_final() when multiple threads
concurrently use the same "vmac(aes)" transform through AF_ALG. The bug
is pretty fundamental: the VMAC template doesn't separate per-request
state from per-tfm (per-key) state like the other hash algorithms do,
but rather stores it all in the tfm context. That's wrong.
Also, vmac_final() incorrectly zeroes most of the state including the
derived keys and cached pseudorandom pad. Therefore, only the first
VMAC invocation with a given key calculates the correct digest.
Fix these bugs by splitting the per-tfm state from the per-request state
and using the proper init/update/final sequencing for requests.
Reproducer for the crash:
#include <linux/if_alg.h>
#include <sys/socket.h>
#include <unistd.h>
int main()
{
int fd;
struct sockaddr_alg addr = {
.salg_type = "hash",
.salg_name = "vmac(aes)",
};
char buf[256] = { 0 };
fd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(fd, (void *)&addr, sizeof(addr));
setsockopt(fd, SOL_ALG, ALG_SET_KEY, buf, 16);
fork();
fd = accept(fd, NULL, NULL);
for (;;)
write(fd, buf, 256);
}
The immediate cause of the crash is that vmac_ctx_t.partial_size exceeds
VMAC_NHBYTES, causing vmac_final() to memset() a negative length.
Reported-by: syzbot+264bca3a6e8d645550d3@syzkaller.appspotmail.com
Fixes: f1939f7c56 ("crypto: vmac - New hash algorithm for intel_txt support")
Cc: <stable@vger.kernel.org> # v2.6.32+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The poll() changes were not well thought out, and completely
unexplained. They also caused a huge performance regression, because
"->poll()" was no longer a trivial file operation that just called down
to the underlying file operations, but instead did at least two indirect
calls.
Indirect calls are sadly slow now with the Spectre mitigation, but the
performance problem could at least be largely mitigated by changing the
"->get_poll_head()" operation to just have a per-file-descriptor pointer
to the poll head instead. That gets rid of one of the new indirections.
But that doesn't fix the new complexity that is completely unwarranted
for the regular case. The (undocumented) reason for the poll() changes
was some alleged AIO poll race fixing, but we don't make the common case
slower and more complex for some uncommon special case, so this all
really needs way more explanations and most likely a fundamental
redesign.
[ This revert is a revert of about 30 different commits, not reverted
individually because that would just be unnecessarily messy - Linus ]
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds the sha384 pre-computed 0-length hash so that device
drivers can use it when an hardware engine does not support computing a
hash from a 0 length input.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the sha512 pre-computed 0-length hash so that device
drivers can use it when an hardware engine does not support computing a
hash from a 0 length input.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This reverts commit eb772f37ae, as now the
x86 Salsa20 implementation has been removed and the generic helpers are
no longer needed outside of salsa20_generic.c.
We could keep this just in case someone else wants to add a new
optimized Salsa20 implementation. But given that we have ChaCha20 now
too, I think it's unlikely. And this can always be reverted back.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a common glue code for optimized implementations of
MORUS AEAD algorithms.
Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the generic implementation of the MORUS family of AEAD
algorithms (MORUS-640 and MORUS-1280). The original authors of MORUS
are Hongjun Wu and Tao Huang.
At the time of writing, MORUS is one of the finalists in CAESAR, an
open competition intended to select a portfolio of alternatives to
the problematic AES-GCM:
https://competitions.cr.yp.to/caesar-submissions.htmlhttps://competitions.cr.yp.to/round3/morusv2.pdf
Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation of adding support for the SIMD based arm64 implementation
of arm64, which requires a fallback to non-SIMD code when invoked in
certain contexts, expose the generic SM4 encrypt and decrypt routines
to other drivers.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for the removal of VLAs[1] from crypto code.
We create 2 new compile-time constants: all ciphers implemented
in Linux have a block size less than or equal to 16 bytes and
the most demanding hw require 16 bytes alignment for the block
buffer.
We also enforce these limits in crypto_check_alg when a new
cipher is registered.
[1] http://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Signed-off-by: Salvatore Mesoraca <s.mesoraca16@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The lookup function in crypto_type was only used for the implicit
IV generators which have been completely removed from the crypto
API.
This patch removes the lookup function as it is now useless.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Prevent improper use of req->result field in ahash update, init, export and
import functions in drivers code. A driver should use ahash request context
if it needs to save internal state.
Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce the SM4 cipher algorithms (OSCCA GB/T 32907-2016).
SM4 (GBT.32907-2016) is a cryptographic standard issued by the
Organization of State Commercial Administration of China (OSCCA)
as an authorized cryptographic algorithms for the use within China.
SMS4 was originally created for use in protecting wireless
networks, and is mandated in the Chinese National Standard for
Wireless LAN WAPI (Wired Authentication and Privacy Infrastructure)
(GB.15629.11-2003).
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All users of ablk_helper have been converted over to crypto_simd, so
remove ablk_helper.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that all users of lrw_crypt() have been removed in favor of the LRW
template wrapping an ECB mode algorithm, remove lrw_crypt(). Also
remove crypto/lrw.h as that is no longer needed either; and fold
'struct lrw_table_ctx' into 'struct priv', lrw_init_table() into
setkey(), and lrw_free_table() into exit_tfm().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that all users of xts_crypt() have been removed in favor of the XTS
template wrapping an ECB mode algorithm, remove xts_crypt().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a function to crypto_simd that registers an array of skcipher
algorithms, then allocates and registers the simd wrapper algorithms for
them. It assumes the naming scheme where the names of the underlying
algorithms are prefixed with two underscores.
Also add the corresponding 'unregister' function.
Most of the x86 crypto modules will be able to use these.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Export the Speck constants and transform context and the ->setkey(),
->encrypt(), and ->decrypt() functions so that they can be reused by the
ARM NEON implementation of Speck-XTS. The generic key expansion code
will be reused because it is not performance-critical and is not
vectorizable, while the generic encryption and decryption functions are
needed as fallbacks and for the XTS tweak encryption.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto engine could actually only enqueue hash and ablkcipher request.
This patch permit it to enqueue any type of crypto_async_request.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Fabien Dessenne <fabien.dessenne@st.com>
Tested-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no need for ahash_mcryptd_{update,final,finup,digest}(); we
should just call crypto_ahash_*() directly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto updates from Herbert Xu:
"API:
- Enforce the setting of keys for keyed aead/hash/skcipher
algorithms.
- Add multibuf speed tests in tcrypt.
Algorithms:
- Improve performance of sha3-generic.
- Add native sha512 support on arm64.
- Add v8.2 Crypto Extentions version of sha3/sm3 on arm64.
- Avoid hmac nesting by requiring underlying algorithm to be unkeyed.
- Add cryptd_max_cpu_qlen module parameter to cryptd.
Drivers:
- Add support for EIP97 engine in inside-secure.
- Add inline IPsec support to chelsio.
- Add RevB core support to crypto4xx.
- Fix AEAD ICV check in crypto4xx.
- Add stm32 crypto driver.
- Add support for BCM63xx platforms in bcm2835 and remove bcm63xx.
- Add Derived Key Protocol (DKP) support in caam.
- Add Samsung Exynos True RNG driver.
- Add support for Exynos5250+ SoCs in exynos PRNG driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (166 commits)
crypto: picoxcell - Fix error handling in spacc_probe()
crypto: arm64/sha512 - fix/improve new v8.2 Crypto Extensions code
crypto: arm64/sm3 - new v8.2 Crypto Extensions implementation
crypto: arm64/sha3 - new v8.2 Crypto Extensions implementation
crypto: testmgr - add new testcases for sha3
crypto: sha3-generic - export init/update/final routines
crypto: sha3-generic - simplify code
crypto: sha3-generic - rewrite KECCAK transform to help the compiler optimize
crypto: sha3-generic - fixes for alignment and big endian operation
crypto: aesni - handle zero length dst buffer
crypto: artpec6 - remove select on non-existing CRYPTO_SHA384
hwrng: bcm2835 - Remove redundant dev_err call in bcm2835_rng_probe()
crypto: stm32 - remove redundant dev_err call in stm32_cryp_probe()
crypto: axis - remove unnecessary platform_get_resource() error check
crypto: testmgr - test misuse of result in ahash
crypto: inside-secure - make function safexcel_try_push_requests static
crypto: aes-generic - fix aes-generic regression on powerpc
crypto: chelsio - Fix indentation warning
crypto: arm64/sha1-ce - get rid of literal pool
crypto: arm64/sha2-ce - move the round constant table to .rodata section
...
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
To allow accelerated implementations to fall back to the generic
routines, e.g., in contexts where a SIMD based implementation is
not allowed to run, expose the generic SHA3 init/update/final
routines to other modules.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation of exposing the generic SHA3 implementation to other
versions as a fallback, simplify the code, and remove an inconsistency
in the output handling (endian swabbing rsizw words of state before
writing the output does not make sense)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SPHINX build emits multiple warnings of kind:
warning: duplicate section name 'Note'
(when building kernel via make target 'htmldocs')
This is caused by repeated use of comments of form:
* Note: soau soaeusoa uoe
We can change the format without loss of clarity and clear the build
warnings.
Add '**[mandatory]**' or '**[optional]**' as kernel-doc field element
description prefix
This renders in HTML as (prefixes in bold)
final
[mandatory] Retrieve result from the driver. This function finalizes the
transformation and retrieves the resulting hash from the driver and
pushes it back to upper layers. No data processing happens at this
point unless hardware requires it to finish the transformation (then
the data buffered by the device driver is processed).
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Export the Salsa20 constants, transform context, and initialization
functions so that they can be reused by the x86 implementation.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Similar to what was done for the hash API, update the AEAD API to track
whether each transform has been keyed, and reject encryption/decryption
if a key is needed but one hasn't been set.
This isn't quite as important as the equivalent fix for the hash API
because AEADs always require a key, so are unlikely to be used without
one. Still, tracking the key will prevent accidental unkeyed use.
algif_aead also had to track the key anyway, so the new flag replaces
that and slightly simplifies the algif_aead implementation.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Similar to what was done for the hash API, update the skcipher API to
track whether each transform has been keyed, and reject
encryption/decryption if a key is needed but one hasn't been set.
This isn't as important as the equivalent fix for the hash API because
symmetric ciphers almost always require a key (the "null cipher" is the
only exception), so are unlikely to be used without one. Still,
tracking the key will prevent accidental unkeyed use. algif_skcipher
also had to track the key anyway, so the new flag replaces that and
simplifies the algif_skcipher implementation.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, almost none of the keyed hash algorithms check whether a key
has been set before proceeding. Some algorithms are okay with this and
will effectively just use a key of all 0's or some other bogus default.
However, others will severely break, as demonstrated using
"hmac(sha3-512-generic)", the unkeyed use of which causes a kernel crash
via a (potentially exploitable) stack buffer overflow.
A while ago, this problem was solved for AF_ALG by pairing each hash
transform with a 'has_key' bool. However, there are still other places
in the kernel where userspace can specify an arbitrary hash algorithm by
name, and the kernel uses it as unkeyed hash without checking whether it
is really unkeyed. Examples of this include:
- KEYCTL_DH_COMPUTE, via the KDF extension
- dm-verity
- dm-crypt, via the ESSIV support
- dm-integrity, via the "internal hash" mode with no key given
- drbd (Distributed Replicated Block Device)
This bug is especially bad for KEYCTL_DH_COMPUTE as that requires no
privileges to call.
Fix the bug for all users by adding a flag CRYPTO_TFM_NEED_KEY to the
->crt_flags of each hash transform that indicates whether the transform
still needs to be keyed or not. Then, make the hash init, import, and
digest functions return -ENOKEY if the key is still needed.
The new flag also replaces the 'has_key' bool which algif_hash was
previously using, thereby simplifying the algif_hash implementation.
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since Poly1305 requires a nonce per invocation, the Linux kernel
implementations of Poly1305 don't use the crypto API's keying mechanism
and instead expect the key and nonce as the first 32 bytes of the data.
But ->setkey() is still defined as a stub returning an error code. This
prevents Poly1305 from being used through AF_ALG and will also break it
completely once we start enforcing that all crypto API users (not just
AF_ALG) call ->setkey() if present.
Fix it by removing crypto_poly1305_setkey(), leaving ->setkey as NULL.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Templates that use an shash spawn can use crypto_shash_alg_has_setkey()
to determine whether the underlying algorithm requires a key or not.
But there was no corresponding function for ahash spawns. Add it.
Note that the new function actually has to support both shash and ahash
algorithms, since the ahash API can be used with either.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- racy use of ctx->rcvused in af_alg
- algif_aead crash in chacha20poly1305
- freeing bogus pointer in pcrypt
- build error on MIPS in mpi
- memory leak in inside-secure
- memory overwrite in inside-secure
- NULL pointer dereference in inside-secure
- state corruption in inside-secure
- build error without CRYPTO_GF128MUL in chelsio
- use after free in n2"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: inside-secure - do not use areq->result for partial results
crypto: inside-secure - fix request allocations in invalidation path
crypto: inside-secure - free requests even if their handling failed
crypto: inside-secure - per request invalidation
lib/mpi: Fix umul_ppmm() for MIPS64r6
crypto: pcrypt - fix freeing pcrypt instances
crypto: n2 - cure use after free
crypto: af_alg - Fix race around ctx->rcvused by making it atomic_t
crypto: chacha20poly1305 - validate the digest size
crypto: chelsio - select CRYPTO_GF128MUL
There are no init and exit callbacks, so delete its comments.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- fix chacha20 crash on zero-length input due to unset IV
- fix potential race conditions in mcryptd with spinlock
- only wait once at top of algif recvmsg to avoid inconsistencies
- fix potential use-after-free in algif_aead/algif_skcipher"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: af_alg - fix race accessing cipher request
crypto: mcryptd - protect the per-CPU queue with a lock
crypto: af_alg - wait for data at beginning of recvmsg
crypto: skcipher - set walk.iv for zero-length inputs
Since commit 499a66e6b6 ("crypto: null - Remove default null
blkcipher"), crypto_get_default_null_skcipher2() and
crypto_put_default_null_skcipher2() are the same as their non-2
equivalents. So switch callers of the "2" versions over to the original
versions and remove the "2" versions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This variable was increased and decreased without any protection.
Result was an occasional misscount and negative wrap around resulting
in false resource allocation failures.
Fixes: 7d2c3f54e6 ("crypto: af_alg - remove locking in async callback")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fixes from Herbert Xu:
"This push fixes the following issues:
- buffer overread in RSA
- potential use after free in algif_aead.
- error path null pointer dereference in af_alg
- forbid combinations such as hmac(hmac(sha3)) which may crash
- crash in salsa20 due to incorrect API usage"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: salsa20 - fix blkcipher_walk API usage
crypto: hmac - require that the underlying hash algorithm is unkeyed
crypto: af_alg - fix NULL pointer dereference in
crypto: algif_aead - fix reference counting of null skcipher
crypto: rsa - fix buffer overread when stripping leading zeroes
mcryptd_enqueue_request() grabs the per-CPU queue struct and protects
access to it with disabled preemption. Then it schedules a worker on the
same CPU. The worker in mcryptd_queue_worker() guards access to the same
per-CPU variable with disabled preemption.
If we take CPU-hotplug into account then it is possible that between
queue_work_on() and the actual invocation of the worker the CPU goes
down and the worker will be scheduled on _another_ CPU. And here the
preempt_disable() protection does not work anymore. The easiest thing is
to add a spin_lock() to guard access to the list.
Another detail: mcryptd_queue_worker() is not processing more than
MCRYPTD_BATCH invocation in a row. If there are still items left, then
it will invoke queue_work() to proceed with more later. *I* would
suggest to simply drop that check because it does not use a system
workqueue and the workqueue is already marked as "CPU_INTENSIVE". And if
preemption is required then the scheduler should do it.
However if queue_work() is used then the work item is marked as CPU
unbound. That means it will try to run on the local CPU but it may run
on another CPU as well. Especially with CONFIG_DEBUG_WQ_FORCE_RR_CPU=y.
Again, the preempt_disable() won't work here but lock which was
introduced will help.
In order to keep work-item on the local CPU (and avoid RR) I changed it
to queue_work_on().
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When chacha20_block() outputs the keystream block, it uses 'u32' stores
directly. However, the callers (crypto/chacha20_generic.c and
drivers/char/random.c) declare the keystream buffer as a 'u8' array,
which is not guaranteed to have the needed alignment.
Fix it by having both callers declare the keystream as a 'u32' array.
For now this is preferable to switching over to the unaligned access
macros because chacha20_block() is only being used in cases where we can
easily control the alignment (stack buffers).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Because the HMAC template didn't check that its underlying hash
algorithm is unkeyed, trying to use "hmac(hmac(sha3-512-generic))"
through AF_ALG or through KEYCTL_DH_COMPUTE resulted in the inner HMAC
being used without having been keyed, resulting in sha3_update() being
called without sha3_init(), causing a stack buffer overflow.
This is a very old bug, but it seems to have only started causing real
problems when SHA-3 support was added (requires CONFIG_CRYPTO_SHA3)
because the innermost hash's state is ->import()ed from a zeroed buffer,
and it just so happens that other hash algorithms are fine with that,
but SHA-3 is not. However, there could be arch or hardware-dependent
hash algorithms also affected; I couldn't test everything.
Fix the bug by introducing a function crypto_shash_alg_has_setkey()
which tests whether a shash algorithm is keyed. Then update the HMAC
template to require that its underlying hash algorithm is unkeyed.
Here is a reproducer:
#include <linux/if_alg.h>
#include <sys/socket.h>
int main()
{
int algfd;
struct sockaddr_alg addr = {
.salg_type = "hash",
.salg_name = "hmac(hmac(sha3-512-generic))",
};
char key[4096] = { 0 };
algfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(algfd, (const struct sockaddr *)&addr, sizeof(addr));
setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key));
}
Here was the KASAN report from syzbot:
BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:341 [inline]
BUG: KASAN: stack-out-of-bounds in sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161
Write of size 4096 at addr ffff8801cca07c40 by task syzkaller076574/3044
CPU: 1 PID: 3044 Comm: syzkaller076574 Not tainted 4.14.0-mm1+ #25
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x25b/0x340 mm/kasan/report.c:409
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x137/0x190 mm/kasan/kasan.c:267
memcpy+0x37/0x50 mm/kasan/kasan.c:303
memcpy include/linux/string.h:341 [inline]
sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161
crypto_shash_update+0xcb/0x220 crypto/shash.c:109
shash_finup_unaligned+0x2a/0x60 crypto/shash.c:151
crypto_shash_finup+0xc4/0x120 crypto/shash.c:165
hmac_finup+0x182/0x330 crypto/hmac.c:152
crypto_shash_finup+0xc4/0x120 crypto/shash.c:165
shash_digest_unaligned+0x9e/0xd0 crypto/shash.c:172
crypto_shash_digest+0xc4/0x120 crypto/shash.c:186
hmac_setkey+0x36a/0x690 crypto/hmac.c:66
crypto_shash_setkey+0xad/0x190 crypto/shash.c:64
shash_async_setkey+0x47/0x60 crypto/shash.c:207
crypto_ahash_setkey+0xaf/0x180 crypto/ahash.c:200
hash_setkey+0x40/0x90 crypto/algif_hash.c:446
alg_setkey crypto/af_alg.c:221 [inline]
alg_setsockopt+0x2a1/0x350 crypto/af_alg.c:254
SYSC_setsockopt net/socket.c:1851 [inline]
SyS_setsockopt+0x189/0x360 net/socket.c:1830
entry_SYSCALL_64_fastpath+0x1f/0x96
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The code paths protected by the socket-lock do not use or modify the
socket in a non-atomic fashion. The actions pertaining the socket do not
even need to be handled as an atomic operation. Thus, the socket-lock
can be safely ignored.
This fixes a bug regarding scheduling in atomic as the callback function
may be invoked in interrupt context.
In addition, the sock_hold is moved before the AIO encrypt/decrypt
operation to ensure that the socket is always present. This avoids a
tiny race window where the socket is unprotected and yet used by the AIO
operation.
Finally, the release of resources for a crypto operation is moved into a
common function of af_alg_free_resources.
Cc: <stable@vger.kernel.org>
Fixes: e870456d8e ("crypto: algif_skcipher - overhaul memory management")
Fixes: d887c52d6a ("crypto: algif_aead - overhaul memory management")
Reported-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Tested-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.15:
API:
- Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
This change touches code outside the crypto API.
- Reset settings when empty string is written to rng_current.
Algorithms:
- Add OSCCA SM3 secure hash.
Drivers:
- Remove old mv_cesa driver (replaced by marvell/cesa).
- Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
- Add ccm/gcm AES in crypto4xx.
- Add support for BCM7278 in iproc-rng200.
- Add hash support on Exynos in s5p-sss.
- Fix fallback-induced error in vmx.
- Fix output IV in atmel-aes.
- Fix empty GCM hash in mediatek.
Others:
- Fix DoS potential in lib/mpi.
- Fix potential out-of-order issues with padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
lib/mpi: call cond_resched() from mpi_powm() loop
crypto: stm32/hash - Fix return issue on update
crypto: dh - Remove pointless checks for NULL 'p' and 'g'
crypto: qat - Clean up error handling in qat_dh_set_secret()
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
crypto: dh - Fix double free of ctx->p
hwrng: iproc-rng200 - Add support for BCM7278
dt-bindings: rng: Document BCM7278 RNG200 compatible
crypto: chcr - Replace _manual_ swap with swap macro
crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
crypto: atmel - remove empty functions
crypto: ecdh - remove empty exit()
MAINTAINERS: update maintainer for qat
crypto: caam - remove unused param of ctx_map_to_sec4_sg()
crypto: caam - remove unneeded edesc zeroization
crypto: atmel-aes - Reset the controller before each use
crypto: atmel-aes - properly set IV after {en,de}crypt
hwrng: core - Reset user selected rng by writing "" to rng_current
...
DRBG is starting an async. crypto op and waiting for it complete.
Move it over to generic code doing the same.
The code now also passes CRYPTO_TFM_REQ_MAY_SLEEP flag indicating
crypto request memory allocation may use GFP_KERNEL which should
be perfectly fine as the code is obviously sleeping for the
completion of the request any way.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
algif starts several async crypto ops and waits for their completion.
Move it over to generic code doing the same.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It multiply GF(2^128) elements in the ble format.
It will be used by chelsio driver to speed up gf multiplication.
Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DH_KPP_SECRET_MIN_SIZE and dh_data_size() are both returning
unsigned values.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ECDH_KPP_SECRET_MIN_SIZE and params->key_size are both returning
unsigned values.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Many GCM users use directly GCM IV size instead of using some constant.
This patch add all IV size constant used by GCM.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* fix documentation of return values for crypto_ahash_init(),
crypto_ahash_finup(), crypto_ahash_final(),
crypto_ahash_digest() and crypto_ahash_update()
Also while at it:
* add notes for device driver developers in struct ahash_alg
description
* fix description of @final method in struct ahash_alg
* fix typo in crypto_ahash_finup() description
Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are already helpers to (un)register multiple normal
and AEAD algos. Add one for ahashes too.
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Consolidate following data structures:
skcipher_async_req, aead_async_req -> af_alg_async_req
skcipher_rsgl, aead_rsql -> af_alg_rsgl
skcipher_tsgl, aead_tsql -> af_alg_tsgl
skcipher_ctx, aead_ctx -> af_alg_ctx
Consolidate following functions:
skcipher_sndbuf, aead_sndbuf -> af_alg_sndbuf
skcipher_writable, aead_writable -> af_alg_writable
skcipher_rcvbuf, aead_rcvbuf -> af_alg_rcvbuf
skcipher_readable, aead_readable -> af_alg_readable
aead_alloc_tsgl, skcipher_alloc_tsgl -> af_alg_alloc_tsgl
aead_count_tsgl, skcipher_count_tsgl -> af_alg_count_tsgl
aead_pull_tsgl, skcipher_pull_tsgl -> af_alg_pull_tsgl
aead_free_areq_sgls, skcipher_free_areq_sgls -> af_alg_free_areq_sgls
aead_wait_for_wmem, skcipher_wait_for_wmem -> af_alg_wait_for_wmem
aead_wmem_wakeup, skcipher_wmem_wakeup -> af_alg_wmem_wakeup
aead_wait_for_data, skcipher_wait_for_data -> af_alg_wait_for_data
aead_data_wakeup, skcipher_data_wakeup -> af_alg_data_wakeup
aead_sendmsg, skcipher_sendmsg -> af_alg_sendmsg
aead_sendpage, skcipher_sendpage -> af_alg_sendpage
aead_async_cb, skcipher_async_cb -> af_alg_async_cb
aead_poll, skcipher_poll -> af_alg_poll
Split out the following common code from recvmsg:
af_alg_alloc_areq: allocation of the request data structure for the
cipher operation
af_alg_get_rsgl: creation of the RX SGL anchored in the request data
structure
The following changes to the implementation without affecting the
functionality have been applied to synchronize slightly different code
bases in algif_skcipher and algif_aead:
The wakeup in af_alg_wait_for_data is triggered when either more data
is received or the indicator that more data is to be expected is
released. The first is triggered by user space, the second is
triggered by the kernel upon finishing the processing of data
(i.e. the kernel is ready for more).
af_alg_sendmsg uses size_t in min_t calculation for obtaining len.
Return code determination is consistent with algif_skcipher. The
scope of the variable i is reduced to match algif_aead. The type of the
variable i is switched from int to unsigned int to match algif_aead.
af_alg_sendpage does not contain the superfluous err = 0 from
aead_sendpage.
af_alg_async_cb requires to store the number of output bytes in
areq->outlen before the AIO callback is triggered.
The POLLIN / POLLRDNORM is now set when either not more data is given or
the kernel is supplied with data. This is consistent to the wakeup from
sleep when the kernel waits for data.
The request data structure is extended by the field last_rsgl which
points to the last RX SGL list entry. This shall help recvmsg
implementation to chain the RX SGL to other SG(L)s if needed. It is
currently used by algif_aead which chains the tag SGL to the RX SGL
during decryption.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are quite a number of occurrences in the kernel of the pattern
if (dst != src)
memcpy(dst, src, walk.total % AES_BLOCK_SIZE);
crypto_xor(dst, final, walk.total % AES_BLOCK_SIZE);
or
crypto_xor(keystream, src, nbytes);
memcpy(dst, keystream, nbytes);
where crypto_xor() is preceded or followed by a memcpy() invocation
that is only there because crypto_xor() uses its output parameter as
one of the inputs. To avoid having to add new instances of this pattern
in the arm64 code, which will be refactored to implement non-SIMD
fallbacks, add an alternative implementation called crypto_xor_cpy(),
taking separate input and output arguments. This removes the need for
the separate memcpy().
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation of introducing crypto_xor_cpy(), which will use separate
operands for input and output, modify the __crypto_xor() implementation,
which it will share with the existing crypto_xor(), which provides the
actual functionality when not using the inline version.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These helpers will be used for fallbacks to kpp software
implementations.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
By adding a struct device *dev to struct engine, we could store the
device used at register time and so use all dev_xxx functions instead of
pr_xxx.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As of now, crypto_akcipher_maxsize() can not be reached without
successfully setting the key for the transformation. akcipher
algorithm implementations check if the key was set and then return
the output buffer size required for the given key.
Change the return type to unsigned int and always assume that this
function is called after a successful setkey of the transformation.
akcipher algorithm implementations will remove the check if key is not NULL
and directly return the max size.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As of now, crypto_kpp_maxsize() can not be reached without successfully
setting the key for the transformation. kpp algorithm implementations
check if the key was set and then return the output buffer size
required for the given key.
Change the return type to unsigned int and always assume that this
function is called after a successful setkey of the transformation.
kpp algorithm implementations will remove the check if key is not NULL
and directly return the max size.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Many HMAC users directly use directly 0x36/0x5c values.
It's better with crypto to use a name instead of directly some crypto
constant.
This patch simply add HMAC_IPAD_VALUE/HMAC_OPAD_VALUE defines in a new
include file "crypto/hmac.h" and use them in crypto/hmac.c
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull security subsystem updates from James Morris:
"Highlights:
IMA:
- provide ">" and "<" operators for fowner/uid/euid rules
KEYS:
- add a system blacklist keyring
- add KEYCTL_RESTRICT_KEYRING, exposes keyring link restriction
functionality to userland via keyctl()
LSM:
- harden LSM API with __ro_after_init
- add prlmit security hook, implement for SELinux
- revive security_task_alloc hook
TPM:
- implement contextual TPM command 'spaces'"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (98 commits)
tpm: Fix reference count to main device
tpm_tis: convert to using locality callbacks
tpm: fix handling of the TPM 2.0 event logs
tpm_crb: remove a cruft constant
keys: select CONFIG_CRYPTO when selecting DH / KDF
apparmor: Make path_max parameter readonly
apparmor: fix parameters so that the permission test is bypassed at boot
apparmor: fix invalid reference to index variable of iterator line 836
apparmor: use SHASH_DESC_ON_STACK
security/apparmor/lsm.c: set debug messages
apparmor: fix boolreturn.cocci warnings
Smack: Use GFP_KERNEL for smk_netlbl_mls().
smack: fix double free in smack_parse_opts_str()
KEYS: add SP800-56A KDF support for DH
KEYS: Keyring asymmetric key restrict method with chaining
KEYS: Restrict asymmetric key linkage using a specific keychain
KEYS: Add a lookup_restriction function for the asymmetric key type
KEYS: Add KEYCTL_RESTRICT_KEYRING
KEYS: Consistent ordering for __key_link_begin and restrict check
KEYS: Add an optional lookup_restriction hook to key_type
...
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.12:
API:
- Add batch registration for acomp/scomp
- Change acomp testing to non-unique compressed result
- Extend algorithm name limit to 128 bytes
- Require setkey before accept(2) in algif_aead
Algorithms:
- Add support for deflate rfc1950 (zlib)
Drivers:
- Add accelerated crct10dif for powerpc
- Add crc32 in stm32
- Add sha384/sha512 in ccp
- Add 3des/gcm(aes) for v5 devices in ccp
- Add Queue Interface (QI) backend support in caam
- Add new Exynos RNG driver
- Add ThunderX ZIP driver
- Add driver for hardware random generator on MT7623 SoC"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (101 commits)
crypto: stm32 - Fix OF module alias information
crypto: algif_aead - Require setkey before accept(2)
crypto: scomp - add support for deflate rfc1950 (zlib)
crypto: scomp - allow registration of multiple scomps
crypto: ccp - Change ISR handler method for a v5 CCP
crypto: ccp - Change ISR handler method for a v3 CCP
crypto: crypto4xx - rename ce_ring_contol to ce_ring_control
crypto: testmgr - Allow ecb(cipher_null) in FIPS mode
Revert "crypto: arm64/sha - Add constant operand modifier to ASM_EXPORT"
crypto: ccp - Disable interrupts early on unload
crypto: ccp - Use only the relevant interrupt bits
hwrng: mtk - Add driver for hardware random generator on MT7623 SoC
dt-bindings: hwrng: Add Mediatek hardware random generator bindings
crypto: crct10dif-vpmsum - Fix missing preempt_disable()
crypto: testmgr - replace compression known answer test
crypto: acomp - allow registration of multiple acomps
hwrng: n2 - Use devm_kcalloc() in n2rng_probe()
crypto: chcr - Fix error handling related to 'chcr_alloc_shash'
padata: get_next is never NULL
crypto: exynos - Add new Exynos RNG driver
...
Add crypto_register_scomps and crypto_unregister_scomps to allow
the registration of multiple implementations with one call.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add crypto_register_acomps and crypto_unregister_acomps to allow
the registration of multiple implementations with one call.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fixes from Herbert Xu:
"This fixes the following problems:
- regression in new XTS/LRW code when used with async crypto
- long-standing bug in ahash API when used with certain algos
- bogus memory dereference in async algif_aead with certain algos"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: algif_aead - Fix bogus request dereference in completion function
crypto: ahash - Fix EINPROGRESS notification callback
crypto: lrw - Fix use-after-free on EINPROGRESS
crypto: xts - Fix use-after-free on EINPROGRESS
The ahash API modifies the request's callback function in order
to clean up after itself in some corner cases (unaligned final
and missing finup).
When the request is complete ahash will restore the original
callback and everything is fine. However, when the request gets
an EBUSY on a full queue, an EINPROGRESS callback is made while
the request is still ongoing.
In this case the ahash API will incorrectly call its own callback.
This patch fixes the problem by creating a temporary request
object on the stack which is used to relay EINPROGRESS back to
the original completion function.
This patch also adds code to preserve the original flags value.
Fixes: ab6bf4e5e5 ("crypto: hash - Fix the pointer voodoo in...")
Cc: <stable@vger.kernel.org>
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, gf128mul_x_ble works with pointers to be128, even though it
actually interprets the words as little-endian. Consequently, it uses
cpu_to_le64/le64_to_cpu on fields of type __be64, which is incorrect.
This patch fixes that by changing the function to accept pointers to
le128 and updating all users accordingly.
Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com>
Reviewd-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The gf128mul_x_ble function is currently defined in gf128mul.c, because
it depends on the gf128mul_table_be multiplication table.
However, since the function is very small and only uses two values from
the table, it is better for it to be defined as inline function in
gf128mul.h. That way, the function can be inlined by the compiler for
better performance.
For consistency, the other gf128mul_x_* functions are also moved to the
header file. In addition, the code is rewritten to be constant-time.
After this change, the speed of the generic 'xts(aes)' implementation
increased from ~225 MiB/s to ~235 MiB/s (measured using 'cryptsetup
benchmark -c aes-xts-plain64' on an Intel system with CRYPTO_AES_X86_64
and CRYPTO_AES_NI_INTEL disabled).
Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com>
Reviewd-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a restrict_link_by_key_or_keyring_chain link restriction that
searches for signing keys in the destination keyring in addition to the
signing key or keyring designated when the destination keyring was
created. Userspace enables this behavior by including the "chain" option
in the keyring restriction:
keyctl(KEYCTL_RESTRICT_KEYRING, keyring, "asymmetric",
"key_or_keyring:<signing key>:chain");
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Adds restrict_link_by_signature_keyring(), which uses the restrict_key
member of the provided destination_keyring data structure as the
key or keyring to search for signing keys.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
The first argument to the restrict_link_func_t functions was a keyring
pointer. These functions are called by the key subsystem with this
argument set to the destination keyring, but restrict_link_by_signature
expects a pointer to the relevant trusted keyring.
Restrict functions may need something other than a single struct key
pointer to allow or reject key linkage, so the data used to make that
decision (such as the trust keyring) is moved to a new, fourth
argument. The first argument is now always the destination keyring.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Lockdep issues a circular dependency warning when AFS issues an operation
through AF_RXRPC from a context in which the VFS/VM holds the mmap_sem.
The theory lockdep comes up with is as follows:
(1) If the pagefault handler decides it needs to read pages from AFS, it
calls AFS with mmap_sem held and AFS begins an AF_RXRPC call, but
creating a call requires the socket lock:
mmap_sem must be taken before sk_lock-AF_RXRPC
(2) afs_open_socket() opens an AF_RXRPC socket and binds it. rxrpc_bind()
binds the underlying UDP socket whilst holding its socket lock.
inet_bind() takes its own socket lock:
sk_lock-AF_RXRPC must be taken before sk_lock-AF_INET
(3) Reading from a TCP socket into a userspace buffer might cause a fault
and thus cause the kernel to take the mmap_sem, but the TCP socket is
locked whilst doing this:
sk_lock-AF_INET must be taken before mmap_sem
However, lockdep's theory is wrong in this instance because it deals only
with lock classes and not individual locks. The AF_INET lock in (2) isn't
really equivalent to the AF_INET lock in (3) as the former deals with a
socket entirely internal to the kernel that never sees userspace. This is
a limitation in the design of lockdep.
Fix the general case by:
(1) Double up all the locking keys used in sockets so that one set are
used if the socket is created by userspace and the other set is used
if the socket is created by the kernel.
(2) Store the kern parameter passed to sk_alloc() in a variable in the
sock struct (sk_kern_sock). This informs sock_lock_init(),
sock_init_data() and sk_clone_lock() as to the lock keys to be used.
Note that the child created by sk_clone_lock() inherits the parent's
kern setting.
(3) Add a 'kern' parameter to ->accept() that is analogous to the one
passed in to ->create() that distinguishes whether kernel_accept() or
sys_accept4() was the caller and can be passed to sk_alloc().
Note that a lot of accept functions merely dequeue an already
allocated socket. I haven't touched these as the new socket already
exists before we get the parameter.
Note also that there are a couple of places where I've made the accepted
socket unconditionally kernel-based:
irda_accept()
rds_rcp_accept_one()
tcp_accept_from_sock()
because they follow a sock_create_kern() and accept off of that.
Whilst creating this, I noticed that lustre and ocfs don't create sockets
through sock_create_kern() and thus they aren't marked as for-kernel,
though they appear to be internal. I wonder if these should do that so
that they use the new set of lock keys.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Constify the buffer passed to crypto_kpp_set_secret() and
kpp_alg.set_secret, since it is never modified.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Constify the multiplication tables passed to the 4k and 64k
multiplication functions, as they are not modified by these functions.
Cc: Alex Cope <alexcope@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix incorrect references to GF(128) instead of GF(2^128), as these are
two entirely different fields, and fix a few other incorrect comments.
Cc: Alex Cope <alexcope@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds crypto_requires_off which is an extension of
crypto_requires_sync for similar bits such as NEED_FALLBACK.
Cc: stable@vger.kernel.org #4.10
Suggested-by: Marcelo Cerri <marcelo.cerri@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of unconditionally forcing 4 byte alignment for all generic
chaining modes that rely on crypto_xor() or crypto_inc() (which may
result in unnecessary copying of data when the underlying hardware
can perform unaligned accesses efficiently), make those functions
deal with unaligned input explicitly, but only if the Kconfig symbol
HAVE_EFFICIENT_UNALIGNED_ACCESS is set. This will allow us to drop
the alignmasks from the CBC, CMAC, CTR, CTS, PCBC and SEQIV drivers.
For crypto_inc(), this simply involves making the 4-byte stride
conditional on HAVE_EFFICIENT_UNALIGNED_ACCESS being set, given that
it typically operates on 16 byte buffers.
For crypto_xor(), an algorithm is implemented that simply runs through
the input using the largest strides possible if unaligned accesses are
allowed. If they are not, an optimal sequence of memory accesses is
emitted that takes the relative alignment of the input buffers into
account, e.g., if the relative misalignment of dst and src is 4 bytes,
the entire xor operation will be completed using 4 byte loads and stores
(modulo unaligned bits at the start and end). Note that all expressions
involving misalign are simply eliminated by the compiler when
HAVE_EFFICIENT_UNALIGNED_ACCESS is defined.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The documentation states that crypto_ahash_reqsize() provides the size
of the state structure used by crypto_ahash_export(). But it's actually
crypto_ahash_statesize() which provides this size.
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In some cases, SIMD algorithms can only perform optimally when
allowed to operate on multiple input blocks in parallel. This is
especially true for bit slicing algorithms, which typically take
the same amount of time processing a single block or 8 blocks in
parallel. However, other SIMD algorithms may benefit as well from
bigger strides.
So add a walksize attribute to the skcipher algorithm definition, and
wire it up to the skcipher walk API. To avoid confusion between the
skcipher and AEAD attributes, rename the skcipher_walk chunksize
attribute to 'stride', and set it from the walksize (in the skcipher
case) or from the chunksize (in the AEAD case).
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This converts the ChaCha20 code from a blkcipher to a skcipher, which
is now the preferred way to implement symmetric block and stream ciphers.
This ports the generic and x86 versions at the same time because the
latter reuses routines of the former.
Note that the skcipher_walk() API guarantees that all presented blocks
except the final one are a multiple of the chunk size, so we can simplify
the encrypt() routine somewhat.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The previous description have been misleading and partially incorrect.
Reported-by: Harsh Jain <harshjain.prof@gmail.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add the KPP API documentation to the kernel crypto API Sphinx
documentation. This addition includes the documentation of the
ECDH and DH helpers which are needed to create the approrpiate input
data for the crypto_kpp_set_secret function.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Update comments to avoid any complaints from Sphinx during compilation.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The AEAD decrypt interface includes the authentication tag in
req->cryptlen. Therefore we need to exlucde that when doing
a walk over it.
This patch adds separate walker functions for AEAD encryption
and decryption.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
When using SGs, only heap memory (memory that is valid as per
virt_addr_valid) is allowed to be referenced. The CTR DRBG used to
reference the caller-provided memory directly in an SG. In case the
caller provided stack memory pointers, the SG mapping is not considered
to be valid. In some cases, this would even cause a paging fault.
The change adds a new scratch buffer that is used unconditionally to
catch the cases where the caller-provided buffer is not suitable for
use in an SG. The crypto operation of the CTR DRBG produces its output
with that scratch buffer and finally copies the content of the
scratch buffer to the caller's buffer.
The scratch buffer is allocated during allocation time of the CTR DRBG
as its access is protected with the DRBG mutex.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch moves the core CBC implementation into a header file
so that it can be reused by drivers implementing CBC.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the simd skcipher helper which is meant to be
a replacement for ablk helper. It replaces the underlying blkcipher
interface with skcipher, and also presents the top-level algorithm
as an skcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts xts over to the skcipher interface. It also
optimises the implementation to be based on ECB instead of the
underlying cipher. For compatibility the existing naming scheme
of xts(aes) is maintained as opposed to the more obvious one of
xts(ecb(aes)).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the skcipher walk interface which replaces both
blkcipher walk and ablkcipher walk. Just like blkcipher walk it
can also be used for AEAD algorithms.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
GF(2^128) multiplication tables are typically used for secret
information, so it's a good idea to zero them on free.
Signed-off-by: Alex Cope <alexcope@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This code is unlikely to be useful in the future because transforms
don't know how often keys will be changed, new algorithms are unlikely
to use lle representation, and tables should be replaced with
carryless multiplication instructions when available.
Signed-off-by: Alex Cope <alexcope@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit 3a01d0ee2b ("crypto: skcipher - Remove top-level
givcipher interface"), crypto_spawn_skcipher2() and
crypto_spawn_skcipher() are equivalent. So switch callers of
crypto_spawn_skcipher2() to crypto_spawn_skcipher() and remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit 3a01d0ee2b ("crypto: skcipher - Remove top-level
givcipher interface"), crypto_grab_skcipher2() and
crypto_grab_skcipher() are equivalent. So switch callers of
crypto_grab_skcipher2() to crypto_grab_skcipher() and remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a synchronous back-end (scomp) to acomp. This allows to easily
expose the already present compression algorithms in LKCF via acomp.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add acomp, an asynchronous compression api that uses scatterlist
buffers.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the new API to create and destroy the crypto engine kthread
worker. The API hides some implementation details.
In particular, kthread_create_worker() allocates and initializes
struct kthread_worker. It runs the kthread the right way
and stores task_struct into the worker structure.
kthread_destroy_worker() flushes all pending works, stops
the kthread and frees the structure.
This patch does not change the existing behavior except for
dynamically allocating struct kthread_worker and storing
only the pointer of this structure.
It is compile tested only because I did not find an easy
way how to run the code. Well, it should be pretty safe
given the nature of the change.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The definition of crypto_lookup_skcipher() was already removed in
commit 3a01d0ee2b ("crypto: skcipher - Remove top-level givcipher
interface"). So the declaration should be removed too.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move common values and types used by ghash-generic to a new header file
so drivers can directly use ghash-generic as a fallback implementation.
Fixes: cc333cd68d ("crypto: vmx - Adding GHASH routines for VMX module")
Cc: stable@vger.kernel.org
Signed-off-by: Marcelo Cerri <marcelo.cerri@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current crypto engine allow only ablkcipher_request to be enqueued.
Thus denying any use of it for hardware that also handle hash algo.
This patch modify the API for allowing to enqueue ciphers and hash.
Since omap-aes/omap-des are the only users, this patch also convert them
to the new cryptoengine API.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch move the whole crypto engine API to its own header
crypto/engine.h.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
important is the use of a ChaCha20-based CRNG for /dev/urandom, which
is faster, more efficient, and easier to make scalable for
silly/abusive userspace programs that want to read from /dev/urandom
in a tight loop on NUMA systems.
This set of patches also improves entropy gathering on VM's running on
Microsoft Azure, and will take advantage of a hw random number
generator (if present) to initialize the /dev/urandom pool.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJXla/8AAoJEPL5WVaVDYGj4xgH/3qDPHpFvynUMbMgg/MRQNt2
K1zhKKQjYuJ465aIiPME21tGC1C5JxO3a9mgDy0pfJmLVvCWRUx9dDtdI59Xkaev
KuVTbqdl8D75lftX3/jF3lXKd5dVLrW2V9hOMcESQqBFuoc1B8sJztR0upQsdGvA
I8+jjxRffSzxDZY4it6p/lqsTdEfwhA+mEc6ztZ+Ccsdlqd+GNCvB/YE4tk+U6x/
tGKaKfuiHSXpR4P9ks/L5gwaIcFQ6Y1rdVqd8YP3iC9YXGFZdJkRXklRRj1mCgWs
YoCDMATTos+6iVONft94fF5pW6HND1F3bxPNo/RpMZca3MlqbiCSij3ky+gqUc4=
=mSBt
-----END PGP SIGNATURE-----
Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull random driver updates from Ted Ts'o:
"A number of improvements for the /dev/random driver; the most
important is the use of a ChaCha20-based CRNG for /dev/urandom, which
is faster, more efficient, and easier to make scalable for
silly/abusive userspace programs that want to read from /dev/urandom
in a tight loop on NUMA systems.
This set of patches also improves entropy gathering on VM's running on
Microsoft Azure, and will take advantage of a hw random number
generator (if present) to initialize the /dev/urandom pool"
(It turns out that the random tree hadn't been in linux-next this time
around, because it had been dropped earlier as being too quiet. Oh
well).
* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: strengthen input validation for RNDADDTOENTCNT
random: add backtracking protection to the CRNG
random: make /dev/urandom scalable for silly userspace programs
random: replace non-blocking pool with a Chacha20-based CRNG
random: properly align get_random_int_hash
random: add interrupt callback to VMBus IRQ handler
random: print a warning for the first ten uninitialized random users
random: initialize the non-blocking pool via add_hwgenerator_randomness()
This patch adds a missing comment for the base parameter in struct
skcipher_alg.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch inlines the functions scatterwalk_start, scatterwalk_map
and scatterwalk_done as they're all tiny and mostly used by the block
cipher walker.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When hard preemption is enabled there is no need to explicitly
call crypto_yield. This patch eliminates it if that is the case.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes the now unused scatterwalk_bytes_sglen. Anyone
using this out-of-tree should switch over to sg_nents_for_len.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes the old crypto_grab_skcipher helper and replaces
it with crypto_grab_skcipher2.
As this is the final entry point into givcipher this patch also
removes all traces of the top-level givcipher interface, including
all implicit IV generators such as chainiv.
The bottom-level givcipher interface remains until the drivers
using it are converted.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds an skcipher null object alongside the existing
null blkcipher so that IV generators using it can switch over
to skcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a chunk size parameter to aead algorithms, just
like the chunk size for skcipher algorithms.
However, unlike skcipher we do not currently export this to AEAD
users. It is only meant to be used by AEAD implementors for now.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Current the default null skcipher is actually a crypto_blkcipher.
This patch creates a synchronous crypto_skcipher version of the
null cipher which unfortunately has to settle for the name skcipher2.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch allows skcipher algorithms and instances to be created
and registered with the crypto API. They are accessible through
the top-level skcipher interface, along with ablkcipher/blkcipher
algorithms and instances.
This patch also introduces a new parameter called chunk size
which is meant for ciphers such as CTR and CTS which ostensibly
can handle arbitrary lengths, but still behave like block ciphers
in that you can only process a partial block at the very end.
For these ciphers the block size will continue to be set to 1
as it is now while the chunk size will be set to the underlying
block size.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When parsing a private key, store all non-optional fields. These
are required for enabling CRT mode for decrypt and verify
Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the helper crypto_inst_setname because the current
helper crypto_alloc_instance2 is no longer useful given that we
now look up the algorithm after we allocate the instance object.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* Implement ECDH under kpp API
* Provide ECC software support for curve P-192 and
P-256.
* Add kpp test for ECDH with data generated by OpenSSL
Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* Implement MPI based Diffie-Hellman under kpp API
* Test provided uses data generad by OpenSSL
Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add key-agreement protocol primitives (kpp) API which allows to
implement primitives required by protocols such as DH and ECDH.
The API is composed mainly by the following functions
* set_secret() - It allows the user to set his secret, also
referred to as his private key, along with the parameters
known to both parties involved in the key-agreement session.
* generate_public_key() - It generates the public key to be sent to
the other counterpart involved in the key-agreement session. The
function has to be called after set_params() and set_secret()
* generate_secret() - It generates the shared secret for the session
Other functions such as init() and exit() are provided for allowing
cryptographic hardware to be inizialized properly before use
Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert wants the sha1-mb algorithm to have an async implementation:
https://lkml.org/lkml/2016/4/5/286.
Currently, sha1-mb uses an async interface for the outer algorithm
and a sync interface for the inner algorithm. This patch introduces
a async interface for even the inner algorithm.
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds helpers to check whether a given tfm is currently
queued. This is meant to be used by ablk_helper and similar
entities to ensure that no reordering is introduced because of
requests queued in cryptd with respect to requests being processed
in softirq context.
The per-cpu queue length limit is also increased to 1000 in line
with network limits.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the implementation of SHA3 algorithm
in software and it's based on original implementation
pushed in patch https://lwn.net/Articles/518415/ with
additional changes to match the padding rules specified
in SHA-3 specification.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Return the raw key with no other processing so that the caller
can copy it or MPI parse it, etc.
The scope is to have only one ANS.1 parser for all RSA
implementations.
Update the RSA software implementation so that it does
the MPI conversion on top.
Signed-off-by: Tudor Ambarus <tudor-dan.ambarus@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hardware cipher implementation may require aligned buffers. All buffers
that potentially are processed with a cipher are now aligned.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CTR DRBG derives its random data from the CTR that is encrypted with
AES.
This patch now changes the CTR DRBG implementation such that the
CTR AES mode is employed. This allows the use of steamlined CTR AES
implementation such as ctr-aes-aesni.
Unfortunately there are the following subtile changes we need to apply
when using the CTR AES mode:
- the CTR mode increments the counter after the cipher operation, but
the CTR DRBG requires the increment before the cipher op. Hence, the
crypto_inc is applied to the counter (drbg->V) once it is
recalculated.
- the CTR mode wants to encrypt data, but the CTR DRBG is interested in
the encrypted counter only. The full CTR mode is the XOR of the
encrypted counter with the plaintext data. To access the encrypted
counter, the patch uses a NULL data vector as plaintext to be
"encrypted".
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull security subsystem updates from James Morris:
"Highlights:
- A new LSM, "LoadPin", from Kees Cook is added, which allows forcing
of modules and firmware to be loaded from a specific device (this
is from ChromeOS, where the device as a whole is verified
cryptographically via dm-verity).
This is disabled by default but can be configured to be enabled by
default (don't do this if you don't know what you're doing).
- Keys: allow authentication data to be stored in an asymmetric key.
Lots of general fixes and updates.
- SELinux: add restrictions for loading of kernel modules via
finit_module(). Distinguish non-init user namespace capability
checks. Apply execstack check on thread stacks"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (48 commits)
LSM: LoadPin: provide enablement CONFIG
Yama: use atomic allocations when reporting
seccomp: Fix comment typo
ima: add support for creating files using the mknodat syscall
ima: fix ima_inode_post_setattr
vfs: forbid write access when reading a file into memory
fs: fix over-zealous use of "const"
selinux: apply execstack check on thread stacks
selinux: distinguish non-init user namespace capability checks
LSM: LoadPin for kernel file loading restrictions
fs: define a string representation of the kernel_read_file_id enumeration
Yama: consolidate error reporting
string_helpers: add kstrdup_quotable_file
string_helpers: add kstrdup_quotable_cmdline
string_helpers: add kstrdup_quotable
selinux: check ss_initialized before revalidating an inode label
selinux: delay inode label lookup as long as possible
selinux: don't revalidate an inode's label when explicitly setting it
selinux: Change bool variable name to index.
KEYS: Add KEYCTL_DH_COMPUTE command
...
Move the point at which a key is determined to be trustworthy to
__key_link() so that we use the contents of the keyring being linked in to
to determine whether the key being linked in is trusted or not.
What is 'trusted' then becomes a matter of what's in the keyring.
Currently, the test is done when the key is parsed, but given that at that
point we can only sensibly refer to the contents of the system trusted
keyring, we can only use that as the basis for working out the
trustworthiness of a new key.
With this change, a trusted keyring is a set of keys that once the
trusted-only flag is set cannot be added to except by verification through
one of the contained keys.
Further, adding a key into a trusted keyring, whilst it might grant
trustworthiness in the context of that keyring, does not automatically
grant trustworthiness in the context of a second keyring to which it could
be secondarily linked.
To accomplish this, the authentication data associated with the key source
must now be retained. For an X.509 cert, this means the contents of the
AuthorityKeyIdentifier and the signature data.
If system keyrings are disabled then restrict_link_by_builtin_trusted()
resolves to restrict_link_reject(). The integrity digital signature code
still works correctly with this as it was previously using
KEY_FLAG_TRUSTED_ONLY, which doesn't permit anything to be added if there
is no system keyring against which trust can be determined.
Signed-off-by: David Howells <dhowells@redhat.com>
Make the determination of the trustworthiness of a key dependent on whether
a key that can verify it is present in the supplied ring of trusted keys
rather than whether or not the verifying key has KEY_FLAG_TRUSTED set.
verify_pkcs7_signature() will return -ENOKEY if the PKCS#7 message trust
chain cannot be verified.
Signed-off-by: David Howells <dhowells@redhat.com>
Generalise system_verify_data() to provide access to internal content
through a callback. This allows all the PKCS#7 stuff to be hidden inside
this function and removed from the PE file parser and the PKCS#7 test key.
If external content is not required, NULL should be passed as data to the
function. If the callback is not required, that can be set to NULL.
The function is now called verify_pkcs7_signature() to contrast with
verify_pefile_signature() and the definitions of both have been moved into
linux/verification.h along with the key_being_used_for enum.
Signed-off-by: David Howells <dhowells@redhat.com>
Add key identifier pointers to public_key_signature struct so that they can
be used to retain the identifier of the key to be used to verify the
signature in both PKCS#7 and X.509.
Signed-off-by: David Howells <dhowells@redhat.com>
Allow authentication data to be stored in an asymmetric key in the 4th
element of the key payload and provide a way for it to be destroyed.
For the public key subtype, this will be a public_key_signature struct.
Signed-off-by: David Howells <dhowells@redhat.com>
Pull security layer updates from James Morris:
"There are a bunch of fixes to the TPM, IMA, and Keys code, with minor
fixes scattered across the subsystem.
IMA now requires signed policy, and that policy is also now measured
and appraised"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (67 commits)
X.509: Make algo identifiers text instead of enum
akcipher: Move the RSA DER encoding check to the crypto layer
crypto: Add hash param to pkcs1pad
sign-file: fix build with CMS support disabled
MAINTAINERS: update tpmdd urls
MODSIGN: linux/string.h should be #included to get memcpy()
certs: Fix misaligned data in extra certificate list
X.509: Handle midnight alternative notation in GeneralizedTime
X.509: Support leap seconds
Handle ISO 8601 leap seconds and encodings of midnight in mktime64()
X.509: Fix leap year handling again
PKCS#7: fix unitialized boolean 'want'
firmware: change kernel read fail to dev_dbg()
KEYS: Use the symbol value for list size, updated by scripts/insert-sys-cert
KEYS: Reserve an extra certificate symbol for inserting without recompiling
modsign: hide openssl output in silent builds
tpm_tis: fix build warning with tpm_tis_resume
ima: require signed IMA policy
ima: measure and appraise the IMA policy itself
ima: load policy using path
...
Make the identifier public key and digest algorithm fields text instead of
enum.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the RSA EMSA-PKCS1-v1_5 encoding from the asymmetric-key public_key
subtype to the rsa crypto module's pkcs1pad template. This means that the
public_key subtype no longer has any dependencies on public key type.
To make this work, the following changes have been made:
(1) The rsa pkcs1pad template is now used for RSA keys. This strips off the
padding and returns just the message hash.
(2) In a previous patch, the pkcs1pad template gained an optional second
parameter that, if given, specifies the hash used. We now give this,
and pkcs1pad checks the encoded message E(M) for the EMSA-PKCS1-v1_5
encoding and verifies that the correct digest OID is present.
(3) The crypto driver in crypto/asymmetric_keys/rsa.c is now reduced to
something that doesn't care about what the encryption actually does
and and has been merged into public_key.c.
(4) CONFIG_PUBLIC_KEY_ALGO_RSA is gone. Module signing must set
CONFIG_CRYPTO_RSA=y instead.
Thoughts:
(*) Should the encoding style (eg. raw, EMSA-PKCS1-v1_5) also be passed to
the padding template? Should there be multiple padding templates
registered that share most of the code?
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
After digsig_asymmetric.c is converted the MPIs can be now
safely removed from the public_key_signature structure.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David Howells <dhowells@redhat.com>
The associated data handling with the kernel crypto API has been
updated. This needs to be reflected in the documentation.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reference the new akcipher API calls in the kernel crypto API DocBook.
Also, fix the comments in the akcipher.h file: double dashes do not look
good in the DocBook; fix a typo.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The patch centralizes the XTS key check logic into the service function
xts_check_key which is invoked from the different XTS implementations.
With this, the XTS implementations in ARM, ARM64, PPC and S390 have now
a sanity check for the XTS keys similar to the other arches.
In addition, this service function received a check to ensure that the
key != the tweak key which is mandated by FIPS 140-2 IG A.9. As the
check is not present in the standards defining XTS, it is only enforced
in FIPS mode of the kernel.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts the module verification code to the new akcipher API.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David Howells <dhowells@redhat.com>
After digsig_asymmetric.c is converted the MPIs can be now
safely removed from the public_key_signature structure.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts the module verification code to the new akcipher API.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the helper function to common header for everybody to use.
changes in v2:
- move the helper to crypto/internal/aead.h
instead of crypto/aead.h
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes all traces of the crypto_hash interface, now
that everyone has switched over to shash or ahash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds helpers to retrieve the alg name and driver name
of crypto_shash and crypto_ahash objects.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now block cipher engines need to implement and maintain their own queue/thread
for processing requests, moreover currently helpers provided for only the queue
itself (in crypto_enqueue_request() and crypto_dequeue_request()) but they
don't help with the mechanics of driving the hardware (things like running the
request immediately, DMA map it or providing a thread to process the queue in)
even though a lot of that code really shouldn't vary that much from device to
device.
Thus this patch provides a mechanism for pushing requests to the hardware
as it becomes free that drivers could use. And this framework is patterned
on the SPI code and has worked out well there.
(https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/
drivers/spi/spi.c?id=ffbbdd21329f3e15eeca6df2d4bc11c04d9d91c0)
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch introduces crypto_queue_len() helper function to help to get the
queue length in the crypto queue list now.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the helper crypto_skcipher_driver_name which returns
the driver name of the alg object for a given tfm. This is needed by
ecryptfs.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As the size of an skcipher_request is variable, it's awkward to
zero it explicitly. This patch adds a helper to do that which
should be used when it is created on the stack.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As the size of an ahash_request or shash_desc is variable, it's
awkward to zero them explicitly. This patch adds helpers to do
that which should be used when they are created on the stack.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The newly released FIPS 140-2 IG 9.8 specifies that for SP800-90A
compliant DRBGs, the FIPS 140-2 continuous random number generator test
is not required any more.
This patch removes the test and all associated data structures.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While converting ecryptfs over to skcipher I found that it needs
to pick a default key size if one isn't given. Rather than having
it poke into the guts of the algorithm to get max_keysize, let's
provide a helper that is meant to give a sane default (just in
case we ever get an algorithm that has no maximum key size).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
API:
- A large number of bug fixes for the af_alg interface, credit goes
to Dmitry Vyukov for discovering and reporting these issues.
Algorithms:
- sw842 needs to select crc32.
- The soft dependency on crc32c is now in the correct spot.
Drivers:
- The atmel AES driver needs HAS_DMA.
- The atmel AES driver was a missing break statement, fortunately
it's only a debug function.
- A number of bug fixes for the Intel qat driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (24 commits)
crypto: algif_skcipher - sendmsg SG marking is off by one
crypto: crc32c - Fix crc32c soft dependency
crypto: algif_skcipher - Load TX SG list after waiting
crypto: atmel-aes - Add missing break to atmel_aes_reg_name
crypto: algif_skcipher - Fix race condition in skcipher_check_key
crypto: algif_hash - Fix race condition in hash_check_key
crypto: CRYPTO_DEV_ATMEL_AES should depend on HAS_DMA
lib: sw842: select crc32
crypto: af_alg - Forbid bind(2) when nokey child sockets are present
crypto: algif_skcipher - Remove custom release parent function
crypto: algif_hash - Remove custom release parent function
crypto: af_alg - Allow af_af_alg_release_parent to be called on nokey path
crypto: qat - update init_esram for C3xxx dev type
crypto: qat - fix timeout issues
crypto: qat - remove to call get_sram_bar_id for qat_c3xxx
crypto: algif_skcipher - Add key check exception for cipher_null
crypto: skcipher - Add crypto_skcipher_has_setkey
crypto: algif_hash - Require setkey before accept(2)
crypto: hash - Add crypto_ahash_has_setkey
crypto: algif_skcipher - Add nokey compatibility path
...
This patch allows af_alg_release_parent to be called even for
nokey sockets.
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a way for skcipher users to determine whether a key
is required by a transform.
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers