The thread switch control register (TSCR) is a per core register
that configures how the CPU shares resources between SMT threads.
Exposing it via sysfs allows us to tune it at run time.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
radix__flush_tlb_all() is called only in kexec path in real mode and any
tracepoints at this stage will make kexec to fail if enabled.
To verify enable tlbie trace before kexec.
$ echo 1 > /sys/kernel/debug/tracing/events/powerpc/tlbie/enable
== kexec into new kernel and kexec fails.
Fix this by not calling trace_tlbie from radix__flush_tlb_all().
Fixes: 0428491cba ("powerpc/mm: Trace tlbie(l) instructions")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
During a kdump kernel boot in PowerPC, we request a reset of the PHBs
to the FW. It makes sense, since if we are booting a kdump kernel it
means we had some trouble before and we cannot rely in the adapters'
health; they could be in a bad state, hence the reset is needed.
But this reset is useful not only in kdump - there are situations,
specially when debugging drivers, that we could break an adapter in
a way it requires such reset. One can tell to just go ahead and
reboot the machine, but happens that many times doing kexec is much
faster, and so preferable than a full power cycle.
This patch adds the ppc_pci_reset_phbs parameter to perform such reset.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As of 438cc81a41 "powerpc/pseries: Automatically resize HPT for memory hot
add/remove" when running on the pseries platform, we always attempt to
use the PAPR extension to resize the hashed page table (HPT) when we add
or remove memory.
This is fine, but when the extension is available we'll give a harmless,
but scary warning. This patch suppresses the warning in this case. It
will still warn if the feature is supposed to be available, but didn't
work.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Symbolic macros are unintuitive and hard to read, whereas octal constants
are much easier to interpret. Replace macros for the basic permission
flags (user/group/other read/write/execute) with numeric constants
instead, across the whole powerpc tree.
Introducing a significant number of changes across the tree for no runtime
benefit isn't exactly desirable, but so long as these macros are still
used in the tree people will keep sending patches that add them. Not only
are they hard to parse at a glance, there are multiple ways of coming to
the same value (as you can see with 0444 and 0644 in this patch) which
hurts readability.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Improve the DTS files by removing all the leading "0x" and zeros to
fix the following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and:
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} +
For simplicity, two sed expressions were used to solve each warnings
separately.
To make the regex expression more robust a few other issues were
resolved, namely setting unit-address to lower case, and adding a
whitespace before the the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This is a follow up to commit 4c9847b737 ("dt-bindings: Remove
leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fix warnings such as:
arch/powerpc/platforms/powermac/backlight.c: In function ‘pmac_backlight_get_legacy_brightness’:
arch/powerpc/platforms/powermac/backlight.c:189:5: error: old-style function definition [-Werror=old-style-definition]
int pmac_backlight_get_legacy_brightness()
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In commit 5b102782c7 ("powerpc/xmon: Enable disassembly files (compilation
changes)") usage of variable `op` has been removed. Completely remove opcode
computation since not used anymore.
Fix fatal warning:
arch/powerpc/xmon/ppc-dis.c: In function ‘lookup_powerpc’:
arch/powerpc/xmon/ppc-dis.c:96:17: error: variable ‘op’ set but not used [-Werror=unused-but-set-variable]
unsigned long op;
^~
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fix fatal warning during compilation:
In file included from arch/powerpc/xmon/xmon.c:54:0:
./arch/powerpc/include/asm/xive.h:157:20: error: no previous prototype for ‘xive_smp_prepare_cpu’ [-Werror=missing-prototypes]
extern inline int xive_smp_prepare_cpu(unsigned int cpu) { return -EINVAL; }
^
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
One of the easiest way to test config with 4K HPTE is to disable 64K hardware
page size like below.
int __init htab_dt_scan_page_sizes(unsigned long node,
size -= 3; prop += 3;
base_idx = get_idx_from_shift(base_shift);
- if (base_idx < 0) {
+ if (base_idx < 0 || base_idx == MMU_PAGE_64K) {
/* skip the pte encoding also */
prop += lpnum * 2; size -= lpnum * 2;
But then this results in error in other part of the code such as MPSS parsing
where we look at 4K base page size and 64K actual page size support.
This patch fix MPSS parsing by ignoring the actual page sizes marked
unsupported. In reality this can happen only with a corrupt device tree. But it
is good to tighten the error check.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Merge our fixes branch from the 4.15 cycle.
Unusually the fixes branch saw some significant features merged,
notably the RFI flush patches, so we want the code in next to be
tested against that, to avoid any surprises when the two are merged.
There's also some other work on the panic handling that was reverted
in fixes and we now want to do properly in next, which would conflict.
And we also fix a few other minor merge conflicts.
Merge the topic branch we share with kvm-ppc, this brings in two xive
commits, one from Paul to rework HMI handling, and a minor cleanup to
drop an unused flag.
Since commit 9427ecbed4 ("gpio: Rework of_gpiochip_set_names()
to use device property accessors"), gpio chips have to have a
parent, otherwise devprop_gpiochip_set_names() prematurely exists
with message "GPIO chip parent is NULL" and doesn't proceed
'gpio-line-names' DT property.
This patch wraps the CPM GPIO into a platform driver to allow
assignment of the parent device.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
To: linuxppc-dev@lists.ozlabs.org
From: Michael Bringmann <mwb@linux.vnet.ibm.com>
Cc: Michael Bringmann <mwb@linux.vnet.ibm.com>
Cc: nfont@linux.vnet.ibm.com
Subject: [PATCH V6 4/4] powerpc: Enable support for ibm,drc-info devtree property
prom_init.c: Enable support for new DRC device tree property
"ibm,drc-info" in initial handshake between the Linux kernel and
the front end processor.
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pseries/drc-info: Provide parallel routines to convert between
drc_index and CPU numbers at runtime, using the older device-tree
properties ("ibm,drc-indexes", "ibm,drc-names", "ibm,drc-types"
and "ibm,drc-power-domains"), or the new property "ibm,drc-info".
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Firmware Features: Define new bit flag representing the presence of
new device tree property "ibm,drc-info". The flag is used to tell
the front end processor whether the Linux kernel supports the new
property, and by the front end processor to tell the Linux kernel
that the new property is present in the device tree.
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
arch/powerpc/sysdev/fsl_pci.c:1307:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
get_user() had it args reversed causing NIP to be NULL:ed instead
of fixing up the PCI access.
Note: This still hangs my P1020 Freescale CPU hard, but at least
I get a NIP now.
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
The overview comments in the powerpc watchdog are out of date after
several iterations and changes of the code. Bring them up to date.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
feature fixups need to use patch_instruction() early in the boot,
even before the code is relocated to its final address, requiring
patch_instruction() to use PTRRELOC() in order to address data.
But feature fixups applies on code before it is set to read only,
even for modules. Therefore, feature fixups can use
raw_patch_instruction() instead.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
patch_instruction() uses almost the same sequence as
__patch_instruction()
This patch refactor it so that patch_instruction() uses
__patch_instruction() instead of duplicating code.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch restores the alphabetic order which was broken by
commit 1e0fc9d1eb ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX
for some configs")
Fixes: 1e0fc9d1eb ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The switch log prints the tv_sec portion of timespec as a 32-bit
number, while overflows in 2106. It also uses the timespec type,
which is safe on 64-bit architectures, but deprecated because
it causes overflows in 2038 elsewhere.
This changes it to timespec64 and printing a 64-bit number for
consistency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In an effort to remove all instances of 'struct timeval'
from the kernel, I'm changing the powerpc mpic_timer interface
to use plain seconds instead. There is only one user of this
interface, and that doesn't use the microseconds portion, so
the code gets noticeably simpler in the process.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-01-19
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) bpf array map HW offload, from Jakub.
2) support for bpf_get_next_key() for LPM map, from Yonghong.
3) test_verifier now runs loaded programs, from Alexei.
4) xdp cpumap monitoring, from Jesper.
5) variety of tests, cleanups and small x64 JIT optimization, from Daniel.
6) user space can now retrieve HW JITed program, from Jiong.
Note there is a minor conflict between Russell's arm32 JIT fixes
and removal of bpf_jit_enable variable by Daniel which should
be resolved by keeping Russell's comment and removing that variable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ARM:
* fix incorrect huge page mappings on systems using the contiguous hint
for hugetlbfs
* support alternative GICv4 init sequence
* correctly implement the ARM SMCC for HVC and SMC handling
PPC:
* add KVM IOCTL for reporting vulnerability and workaround status
s390:
* provide userspace interface for branch prediction changes in firmware
x86:
* use correct macros for bits
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJaY3/eAAoJEED/6hsPKofo64kH/16SCSA9pKJTf39+jLoCPzbp
tlhzxoaqb9cPNMQBAk8Cj5xNJ6V4Clwnk8iRWaE6dRI5nWQxnxRHiWxnrobHwUbK
I0zSy+SywynSBnollKzLzQrDUBZ72fv3oLwiYEYhjMvs0zW6Q/vg10WERbav912Q
bv8nb5e8TbvU500ErndKTXOa8/B6uZYkMVjBNvAHwb+4AQ7bJgDQs5/qOeXllm8A
MT/SNYop/fkjRP7mQng5XYzoO+70tbe0hWpOQGgBnduzrbkNNvZtYtovusHYytLX
PAB7DDPbLZm5L2HBo4zvKgTHIoHTxU0X2yfUDzt7O151O2WSyqBRC3y1tpj6xa8=
=GnNJ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM:
- fix incorrect huge page mappings on systems using the contiguous
hint for hugetlbfs
- support alternative GICv4 init sequence
- correctly implement the ARM SMCC for HVC and SMC handling
PPC:
- add KVM IOCTL for reporting vulnerability and workaround status
s390:
- provide userspace interface for branch prediction changes in
firmware
x86:
- use correct macros for bits"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: wire up bpb feature
KVM: PPC: Book3S: Provide information about hardware/firmware CVE workarounds
KVM/x86: Fix wrong macro references of X86_CR0_PG_BIT and X86_CR4_PAE_BIT in kvm_valid_sregs()
arm64: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls
KVM: arm64: Fix GICv4 init when called from vgic_its_create
KVM: arm/arm64: Check pagesize when allocating a hugepage at Stage 2
9003a2498 removed checn from the DMA window pages allocator, however
the VFIO driver tests limits before doing so by calling
the get_table_size hook which was left behind; this fixes it.
Fixes: 9003a2498 "powerpc/powernv/ioda: Remove explicit max window size check"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Radix enabled platforms don't support subpage_prot() system calls. But
at present the system call goes through without an error and fails
later on while validating expected subpage accesses. Lets not allow
the system call on powerpc radix platforms to begin with to prevent
this confusion in user space.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Patch provides the ability for a process to
associate a pkey with a address range.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Finally this patch provides the ability for a process to
allocate and free a protection key.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PAPR defines 'ibm,processor-storage-keys' property. It exports two
values. The first value holds the number of data-access keys and the
second holds the number of instruction-access keys. Due to a bug in
the firmware, instruction-access keys is always reported as zero.
However any key can be configured to disable data-access and/or
disable execution-access. The inavailablity of the second value is not
a big handicap, though it could have been used to determine if the
platform supported disable-execution-access.
Non-PAPR platforms do not define this property in the device tree yet.
Fortunately power8 is the only released Non-PAPR platform that is
supported. Here, we hardcode the number of supported pkey to 32, by
consulting the PowerISA3.0
This patch calculates the number of keys supported by the platform.
Also it determines the platform support for read/write/execution
access support for pkeys.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[mpe: Use a PVR check instead of CPU_FTR for execute. Restrict to
Power7/8/9 for now until older CPUs are tested.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The AMR/IAMR/UAMOR are part of the program context.
Allow it to be accessed via ptrace and through core files.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The value of the pkey, whose protection got violated,
is made available in si_pkey field of the siginfo structure.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
get_mm_addr_key() helper returns the pkey associated with
an address corresponding to a given mm_struct.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Handle Data and Instruction exceptions caused by memory
protection-key.
The CPU will detect the key fault if the HPTE is already
programmed with the key.
However if the HPTE is not hashed, a key fault will not
be detected by the hardware. The software will detect
pkey violation in such a case.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch provides the implementation for
arch_vma_access_permitted(). Returns true if the
requested access is allowed by pkey associated with the
vma.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Make sure that the kernel does not access user pages without
checking their key-protection.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[mpe: Integrate with upstream version of pte_access_permitted()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
helper function that checks if the read/write/execute is allowed
on the pte.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Map the PTE protection key bits to the HPTE key protection bits,
while creating HPTE entries.
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Map the key protection bits of the vma to the pkey bits in
the PTE.
The PTE bits used for pkey are 3,4,5,6 and 57. The first
four bits are the same four bits that were freed up initially
in this patch series. remember? :-) Without those four bits
this patch wouldn't be possible.
BUT, on 4k kernel, bit 3, and 4 could not be freed up. remember?
Hence we have to be satisfied with 5, 6 and 7.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
arch independent code calls arch_override_mprotect_pkey()
to return a pkey that best matches the requested protection.
This patch provides the implementation.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
arch-independent code expects the arch to map
a pkey into the vma's protection bit setting.
The patch provides that ability.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch provides the implementation of execute-only pkey.
The architecture-independent layer expects the arch-dependent
layer, to support the ability to create and enable a special
key which has execute-only permission.
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Store and restore the AMR, IAMR and UAMOR register state of the task
before scheduling out and after scheduling in, respectively.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc has hardware support to disable execute on a pkey.
This patch enables the ability to create execute-disabled
keys.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch provides the detailed implementation for
a user to allocate a key and enable it in the hardware.
It provides the plumbing, but it cannot be used till
the system call is implemented. The next patch will
do so.
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cleanup the bits corresponding to a key in the AMR, and IAMR
register, when the key is newly allocated/activated or is freed.
We dont want some residual bits cause the hardware enforce
unintended behavior when the key is activated or freed.
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Introduce helper functions that can initialize the bits in the AMR,
IAMR and UAMOR register; the bits that correspond to the given pkey.
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Implements helper functions to read and write the key related
registers; AMR, IAMR, UAMOR.
AMR register tracks the read,write permission of a key
IAMR register tracks the execute permission of a key
UAMOR register enables and disables a key
Acked-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Total 32 keys are available on power7 and above. However
pkey 0,1 are reserved. So effectively we have 30 pkeys.
On 4K kernels, we do not have 5 bits in the PTE to
represent all the keys; we only have 3bits. Two of those
keys are reserved; pkey 0 and pkey 1. So effectively we
have 6 pkeys.
This patch keeps track of reserved keys, allocated keys
and keys that are currently free.
Also it adds skeletal functions and macros, that the
architecture-independent code expects to be available.
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Basic plumbing to initialize the pkey system.
Nothing is enabled yet. A later patch will enable it
once all the infrastructure is in place.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[mpe: Rework copyrights to use SPDX tags]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The BPF verifier conflict was some minor contextual issue.
The TUN conflict was less trivial. Cong Wang fixed a memory leak of
tfile->tx_array in 'net'. This is an skb_array. But meanwhile in
net-next tun changed tfile->tx_arry into tfile->tx_ring which is a
ptr_ring.
Signed-off-by: David S. Miller <davem@davemloft.net>
Having a pure_initcall() callback just to permanently enable BPF
JITs under CONFIG_BPF_JIT_ALWAYS_ON is unnecessary and could leave
a small race window in future where JIT is still disabled on boot.
Since we know about the setting at compilation time anyway, just
initialize it properly there. Also consolidate all the individual
bpf_jit_enable variables into a single one and move them under one
location. Moreover, don't allow for setting unspecified garbage
values on them.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If a dax buffer from a device that does not map pages is passed to
read(2) or write(2) as a target for direct-I/O it triggers SIGBUS. If
gdb attempts to examine the contents of a dax buffer from a device that
does not map pages it triggers SIGBUS. If fork(2) is called on a process
with a dax mapping from a device that does not map pages it triggers
SIGBUS. 'struct page' is required otherwise several kernel code paths
break in surprising ways. Disable filesystem-dax on devices that do not
map pages.
In addition to needing pfn_to_page() to be valid we also require devmap
pages. We need this to detect dax pages in the get_user_pages_fast()
path and so that we can stop managing the VM_MIXEDMAP flag. For DAX
drivers that have not supported get_user_pages() to date we allow them
to opt-in to supporting DAX with the CONFIG_FS_DAX_LIMITED configuration
option which requires ->direct_access() to return pfn_t_special() pfns.
This leaves DAX support in brd disabled and scheduled for removal.
Note that when the initial dax support was being merged a few years back
there was concern that struct page was unsuitable for use with next
generation persistent memory devices. The theoretical concern was that
struct page access, being such a hotly used data structure in the
kernel, would lead to media wear out. While that was a reasonable
conservative starting position it has not held true in practice. We have
long since committed to using devm_memremap_pages() to support higher
order kernel functionality that needs get_user_pages() and
pfn_to_page().
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In support of removing the VM_MIXEDMAP indication from DAX VMAs,
introduce pfn_t_special() for drivers to indicate that _PAGE_SPECIAL
should be used for DAX ptes. This also helps identify drivers like
dccssblk that only want to use DAX in a read-only fashion without
get_user_pages() support.
Ideally we could delete axonram and dcssblk DAX support, but if we need
to keep it better make it explicit that axonram and dcssblk only support
a sub-set of DAX due to missing _PAGE_DEVMAP support.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
More than we'd like after rc8, but nothing very alarming either, just tying up
loose ends before the release:
Since we changed powernv to use cpufreq_get() from show_cpuinfo(), we see
warnings with PREEMPT enabled. But the preempt_disable() in show_cpuinfo()
doesn't actually prevent CPU hotplug as it suggests, so remove it.
Two updates to the recently merged RFI flush code. Wire up the generic sysfs
file to report the status, and add a debugfs file to allow enabling/disabling it
at runtime.
Two updates to xmon, one to add the RFI flush related fields to the paca dump,
and another to not use hashed pointers in the paca dump.
And one minor fix to add a missing include of linux/types.h in asm/hvcall.h, not
seen to break the build in upstream, but correct anyway.
Thanks to:
Benjamin Herrenschmidt, Michal Suchanek, Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----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=zgy0
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.15-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"More than we'd like after rc8, but nothing very alarming either, just
tying up loose ends before the release:
Since we changed powernv to use cpufreq_get() from show_cpuinfo(), we
see warnings with PREEMPT enabled. But the preempt_disable() in
show_cpuinfo() doesn't actually prevent CPU hotplug as it suggests, so
remove it.
Two updates to the recently merged RFI flush code. Wire up the generic
sysfs file to report the status, and add a debugfs file to allow
enabling/disabling it at runtime.
Two updates to xmon, one to add the RFI flush related fields to the
paca dump, and another to not use hashed pointers in the paca dump.
And one minor fix to add a missing include of linux/types.h in
asm/hvcall.h, not seen to break the build in upstream, but correct
anyway.
Thanks to: Benjamin Herrenschmidt, Michal Suchanek, Nicholas Piggin"
* tag 'powerpc-4.15-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: include linux/types.h in asm/hvcall.h
powerpc/64s: Allow control of RFI flush via debugfs
powerpc/64s: Wire up cpu_show_meltdown()
powerpc: Don't preempt_disable() in show_cpuinfo()
powerpc/xmon: Don't print hashed pointers in paca dump
powerpc/xmon: Add RFI flush related fields to paca dump
The POWER9 core supports a new feature: ASB_Notify which requires the
support of the Special Purpose Register: TIDR.
The ASB_Notify command, generated by the AFU, will attempt to
wake-up the host thread identified by the particular LPID:PID:TID.
This patch assign a unique TIDR (thread id) for the current thread which
will be used in the process element entry.
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Reviewed-by: Philippe Bergheaud <felix@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Change the data type for the variable 'ncpu' in ppc_core_imc_cpu_offline(),
since cpumask_any_but() returns an 'int' value.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In memory Collection (IMC) counter pmu driver controls the ucode's
execution state. At the system boot, IMC perf driver pause the ucode.
Ucode state is changed to "running" only when any of the nest units
are monitored or profiled using perf tool.
Nest units support only limited set of hardware counters and ucode is
always programmed in the "production mode" ("accumulation") mode. This
mode is configured to provide key performance metric data for most of
the nest units.
But ucode also supports other modes which would be used for "debug" to
drill down specific nest units. That is, ucode when switched to
"powerbus" debug mode (for example), will dynamically reconfigure the
nest counters to target only "powerbus" related events in the hardware
counters. This allows the IMC nest unit to focus on powerbus related
transactions in the system in more detail. At this point, production
mode events may or may not be counted.
IMC nest counters has both in-band (ucode access) and out of band
access to it. Since not all nest counter configurations are supported
by ucode, out of band tools are used to characterize other nest
counter configurations.
Patch provides an interface via "debugfs" to enable the switching of
ucode modes in the system. To switch ucode mode, one has to first
pause the microcode (imc_cmd), and then write the target mode value to
the "imc_mode" file.
Proposed Approach:
In the proposed approach, the function (export_imc_mode_and_cmd) which
creates the debugfs interface for imc mode and command is implemented
in opal-imc.c. Thus we can use imc_get_mem_addr() to get the homer
base address for each chip.
The interface to expose imc mode and command is required only if we
have nest pmu units registered. Employing the existing data structures
to track whether we have any nest units registered will require to
extend data from perf side to opal-imc.c. Instead an integer is
introduced to hold that information by counting successful nest unit
registration. Debugfs interface is removed based on the integer count.
Example for the interface:
$ ls /sys/kernel/debug/imc
imc_cmd_0 imc_cmd_8 imc_mode_0 imc_mode_8
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove the allocation of struct imc_events from imc_parse_event().
Instead pass imc_events as a parameter to imc_parse_event(), which is
a pointer to a slot in the array allocated in
update_events_in_group().
Reported-by: Dan Carpenter ("powerpc/perf: Fix a sizeof() typo so we allocate less memory")
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Factor out memory freeing part for attribute elements from
imc_common_cpuhp_mem_free().
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove the global variable 'thread_imc_pmu', since it is not used in the code.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
local_t is used for atomic modifications for per-CPU data, versus
re-entrant modifications via interrupts.
local_t read-modify-write atomic operations are currently implemented
with hardware atomics (larx/stcx), which are quite slow. This patch
implements them by masking all types of interrupts that may do local_t
operations ("standard" and perf interrupts).
Rusty's benchmark (https://lkml.org/lkml/2008/12/16/450) gives the
following timings for the local_t test, in nanoseconds per iteration:
larx/stcx irq+pmu disable
_inc 38 10
_add 38 10
_read 4 4
_add_return 38 10
There are still some interrupt types (system reset, machine check, and
watchdog), which can not safely use local_t operations, because they
are not masked.
An alternative approach was proposed, using a CR bit to mark a critical
section, which is tested in the interrupt return path, and would then
branch to a fixup handler (similar to exception fixups), which re-starts
the operation. The problem with this was the complexity of the fixup
handler and the latency of the slow path.
https://lists.ozlabs.org/pipermail/linuxppc-dev/2014-November/123024.html
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc implements local_t with atomic operations. There is already
an asm-generic implementation which does this using atomic_t.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
To support soft-masking of the performance monitor interrupt, a set of
new powerpc_local_irq_pmu_save() and powerpc_local_irq_restore()
functions are added. And powerpc_local_irq_save() implemented, by
adding a new irq_soft_mask manipulation function
irq_soft_mask_or_return().
Local_irq_pmu_* macros are provided to access these
powerpc_local_irq_pmu* functions which includes
trace_hardirqs_on|off() to match what we have in
include/linux/irqflags.h.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
New Kconfig is added "CONFIG_PPC_IRQ_SOFT_MASK_DEBUG" to add WARN_ON
to alert the invalid transitions. Also moved the code under the
CONFIG_TRACE_IRQFLAGS in arch_local_irq_restore() to new Kconfig.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Fix name of CONFIG option in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Two new bit mask field "IRQ_DISABLE_MASK_PMU" is introduced to support
the masking of PMI and "IRQ_DISABLE_MASK_ALL" to aid interrupt masking
checking.
Couple of new irq #defs "PACA_IRQ_PMI" and "SOFTEN_VALUE_0xf0*" added
to use in the exception code to check for PMI interrupts.
In the masked_interrupt handler, for PMIs we reset the MSR[EE] and
return. In the __check_irq_replay(), replay the PMI interrupt by
calling performance_monitor_common handler.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
To support addition of "bitmask" to MASKABLE_* macros, factor out the
EXCPETION_PROLOG_1 macro.
Make it explicit the interrupt masking supported by a gievn interrupt
handler. Patch correspondingly extends the MASKABLE_* macros with an
addition's parameter. "bitmask" parameter is passed to SOFTEN_TEST
macro to decide on masking the interrupt.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently we use both EXCEPTION_PROLOG_1 and __EXCEPTION_PROLOG_1 in
the MASKABLE_* macros. As a cleanup, this patch makes MASKABLE_* to
use only __EXCEPTION_PROLOG_1. There is not logic change.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rename the paca->soft_enabled to paca->irq_soft_mask as it is no
longer used as a flag for interrupt state, but a mask.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
"paca->soft_enabled" is used as a flag to mask some of interrupts.
Currently supported flags values and their details:
soft_enabled MSR[EE]
0 0 Disabled (PMI and HMI not masked)
1 1 Enabled
"paca->soft_enabled" is initialized to 1 to make the interripts as
enabled. arch_local_irq_disable() will toggle the value when
interrupts needs to disbled. At this point, the interrupts are not
actually disabled, instead, interrupt vector has code to check for the
flag and mask it when it occurs. By "mask it", it update interrupt
paca->irq_happened and return. arch_local_irq_restore() is called to
re-enable interrupts, which checks and replays interrupts if any
occured.
Now, as mentioned, current logic doesnot mask "performance monitoring
interrupts" and PMIs are implemented as NMI. But this patchset depends
on local_irq_* for a successful local_* update. Meaning, mask all
possible interrupts during local_* update and replay them after the
update.
So the idea here is to reserve the "paca->soft_enabled" logic. New
values and details:
soft_enabled MSR[EE]
1 0 Disabled (PMI and HMI not masked)
0 1 Enabled
Reason for the this change is to create foundation for a third mask
value "0x2" for "soft_enabled" to add support to mask PMIs. When
->soft_enabled is set to a value "3", PMI interrupts are mask and when
set to a value of "1", PMI are not mask. With this patch also extends
soft_enabled as interrupt disable mask.
Current flags are renamed from IRQ_[EN?DIS}ABLED to
IRQS_ENABLED and IRQS_DISABLED.
Patch also fixes the ptrace call to force the user to see the softe
value to be alway 1. Reason being, even though userspace has no
business knowing about softe, it is part of pt_regs. Like-wise in
signal context.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Minor cleanup to use helper function for manipulating
paca->soft_enabled variable.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a new wrapper function, soft_enabled_set_return(), added to do the
paca->soft_enabled updates requiring a set-return.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a new wrapper function, soft_enabled_return(), added to return
paca->soft_enabled value.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move set_soft_enabled() from powerpc/kernel/irq.c to asm/hw_irq.c, to
encourage updates to paca->soft_enabled done via these access
function. Add "memory" clobber to hint compiler since
paca->soft_enabled memory is the target here.
Renaming it as soft_enabled_set() will make namespaces works better as
prefix than a postfix when new soft_enabled manipulation functions are
introduced.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In powerpc/64, the arch_local_irq_disable() function returns unsigned
long, which is not consistent with other architectures.
Move that set-return asm implementation into arch_local_irq_save(),
and make arch_local_irq_disable() return void, simplifying the
assembly.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
arch_local_irq_disable is implemented strangely, with a temporary
output register being set to the desired soft_enabled value via an
immediate input, which is then used to store to memory. This is not
required, the immediate can be specified directly as a register input.
For simple cases at least, assembly is unchanged except register
mapping.
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Two #defines IRQS_ENABLED and IRQS_DISABLED are added to be used when
updating paca->soft_enabled. Replace the hardcoded values used when
updating paca->soft_enabled with IRQ_(EN|DIS)ABLED #define. No logic
change.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We have always had softe in pt_regs, and accessible via PT_SOFTE, even
though it is not userspace state.
The value userspace sees should always be 1, because we should never
be in userspace with interrupts soft disabled.
In a subsequent patch we will be changing the semantics of the kernel
softe value, so hard wire the value to 1 to retain the existing
semantics. As far as we know nothing ever looks at it, but better safe
than sorry.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Split out of larger patch, write change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The recent changes to TLB handling broke the PS3 build:
arch/powerpc/include/asm/book3s/64/tlbflush.h:30: undefined reference to `.hash__tlbiel_all'
Fix it by adding an fallback version of tlbiel_all() for non-native
builds. It should never be called, due to checks in callers so it
calls BUG(). We should probably clean it up further but this will
suffice for now.
Fixes: d4748276ae ("powerpc/64s: Improve local TLB flush for boot and MCE on POWER9")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds a new ioctl, KVM_PPC_GET_CPU_CHAR, that gives userspace
information about the underlying machine's level of vulnerability
to the recently announced vulnerabilities CVE-2017-5715,
CVE-2017-5753 and CVE-2017-5754, and whether the machine provides
instructions to assist software to work around the vulnerabilities.
The ioctl returns two u64 words describing characteristics of the
CPU and required software behaviour respectively, plus two mask
words which indicate which bits have been filled in by the kernel,
for extensibility. The bit definitions are the same as for the
new H_GET_CPU_CHARACTERISTICS hypercall.
There is also a new capability, KVM_CAP_PPC_GET_CPU_CHAR, which
indicates whether the new ioctl is available.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This works on top of the single escalation support. When in single
escalation, with this change, we will keep the escalation interrupt
disabled unless the VCPU is in H_CEDE (idle). In any other case, we
know the VCPU will be rescheduled and thus there is no need to take
escalation interrupts in the host whenever a guest interrupt fires.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The prodded flag is only cleared at the beginning of H_CEDE,
so every time we have an escalation, we will cause the *next*
H_CEDE to return immediately.
Instead use a dedicated "irq_pending" flag to indicate that
a guest interrupt is pending for the VCPU. We don't reuse the
existing exception bitmap so as to avoid expensive atomic ops.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
That feature, provided by Power9 DD2.0 and later, when supported
by newer OPAL versions, allows us to sacrifice a queue (priority 7)
in favor of merging all the escalation interrupts of the queues
of a single VP into a single interrupt.
This reduces the number of host interrupts used up by KVM guests
especially when those guests use multiple priorities.
It will also enable a future change to control the masking of the
escalation interrupts more precisely to avoid spurious ones.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Add details about enabled queues and escalation interrupts.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This merges in the ppc-kvm topic branch of the powerpc tree to get
two patches which are prerequisites for the following patch series,
plus another patch which touches both powerpc and KVM code.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
powerpc calls irq_exit() with local irqs disabled, therefore it
can define __ARCH_IRQ_EXIT_IRQS_DISABLED.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The powerpc NMI IPIs may not be recoverable if they are taken in
some sections of code, and also there have been and still are issues
with taking NMIs (in KVM guest code, in firmware, etc) which makes them
a bit dangerous to use.
Generic code like softlockup detector and rcu stall detectors really
hammer on trigger_*_backtrace, which has lead to further problems
because we've implemented it with the NMI.
So stop providing NMI backtraces for now. Importantly, the powerpc code
uses NMI IPIs in crash/debug, and the SMP hardlockup watchdog. So if the
softlockup and rcu hang detection traces are not being printed because
the CPU is stuck with interrupts off, then the hard lockup watchdog
should get it with the NMI IPI.
Fixes: 2104180a53 ("powerpc/64s: implement arch-specific hardlockup watchdog")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Book3S PACA memory allocation is restricted by the RMA limit and also
must not take SLB faults when accessed in virtual mode. Currently a
fixed 256MB limit is used for this, which is imprecise and sub-optimal.
Update the paca allocation limits to use use the ppc64_rma_size for RMA
limit, and share the safe_stack_limit() that is currently used for stack
allocations that must not take virtual mode faults.
The safe_stack_limit() name is changed to ppc64_bolted_size() to match
ppc64_rma_size and some comments are updated. We also need to use
early_mmu_has_feature() because we are now calling this function prior
to the jump label patching that enables mmu_has_feature().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Change mmu_has_feature() to early_mmu_has_feature()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Hypervisor maintenance interrupts (HMIs) are generated by various
causes, signalled by bits in the hypervisor maintenance exception
register (HMER). In most cases calling OPAL to handle the interrupt
is the correct thing to do, but the "debug trigger" HMIs signalled by
PPC bit 17 (bit 46) of HMER are used to invoke software workarounds
for hardware bugs, and OPAL does not have any code to handle this
cause. The debug trigger HMI is used in POWER9 DD2.0 and DD2.1 chips
to work around a hardware bug in executing vector load instructions to
cache inhibited memory. In POWER9 DD2.2 chips, it is generated when
conditions are detected relating to threads being in TM (transactional
memory) suspended mode when the core SMT configuration needs to be
reconfigured.
The kernel currently has code to detect the vector CI load condition,
but only when the HMI occurs in the host, not when it occurs in a
guest. If a HMI occurs in the guest, it is always passed to OPAL, and
then we always re-sync the timebase, because the HMI cause might have
been a timebase error, for which OPAL would re-sync the timebase, thus
removing the timebase offset which KVM applied for the guest. Since
we don't know what OPAL did, we don't know whether to subtract the
timebase offset from the timebase, so instead we re-sync the timebase.
This adds code to determine explicitly what the cause of a debug
trigger HMI will be. This is based on a new device-tree property
under the CPU nodes called ibm,hmi-special-triggers, if it is
present, or otherwise based on the PVR (processor version register).
The handling of debug trigger HMIs is pulled out into a separate
function which can be called from the KVM guest exit code. If this
function handles and clears the HMI, and no other HMI causes remain,
then we skip calling OPAL and we proceed to subtract the guest
timebase offset from the timebase.
The overall handling for HMIs that occur in the host (i.e. not in a
KVM guest) is largely unchanged, except that we now don't set the flag
for the vector CI load workaround on DD2.2 processors.
This also removes a BUG_ON in the KVM code. BUG_ON is generally not
useful in KVM guest entry/exit code since it is difficult to handle
the resulting trap gracefully.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 chip versions starting with "Nimbus" v2.2 can support running
with some threads of a core in HPT mode and others in radix mode.
This means that we don't have to prohibit independent-threads mode
when running a HPT guest on a radix host, and we don't have to do any
of the synchronization between threads that was introduced in commit
c01015091a ("KVM: PPC: Book3S HV: Run HPT guests on POWER9 radix
hosts", 2017-10-19).
Rather than using up another CPU feature bit, we just do an
explicit test on the PVR (processor version register) at module
startup time to determine whether we have to take steps to avoid
having some threads in HPT mode and some in radix mode (so-called
"mixed mode"). We test for "Nimbus" (indicated by 0 or 1 in the top
nibble of the lower 16 bits) v2.2 or later, or "Cumulus" (indicated by
2 or 3 in that nibble) v1.1 or later.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Instead of calling both of_irq_parse_pci() and irq_create_of_mapping(),
call of_irq_parse_and_map_pci(), which does the same thing. This will allow
making of_irq_parse_pci() a private, static function.
This changes the logic slightly in that the fallback path will also be
taken if irq_create_of_mapping() fails internally.
Signed-off-by: Rob Herring <robh@kernel.org>
[bhelgaas: fold in virq init from Stephen Rothwell <sfr@canb.auug.org.au>]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
With the previous patch to switch to 64-bit mode after returning from
RTAS and before doing any memory accesses, the RMA limit need not be
clamped to 1GB to avoid RTAS bugs.
Keep the 1GB limit for older firmware (although this is more of a kernel
concern than RTAS), and remove it starting with POWER9.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With the previous patch to switch to 64-bit mode after returning from
RTAS and before doing any memory accesses, the RMA limit need not be
clamped to 1GB to avoid RTAS bugs.
Keep the 1GB limit for older firmware (although this is more of a kernel
concern than RTAS), and remove it starting with POWER9.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 177ba7c647 ("powerpc/mm/radix: Limit paca allocation in radix")
limited the paca allocation address to 1G on pSeries because RTAS return
accesses the paca in 32-bit mode:
On return from RTAS we access the paca variables and we have 64 bit
disabled. This requires us to limit paca in 32 bit range.
Fix this by setting ppc64_rma_size to first_memblock_size/1G range.
Avoid this limit by switching to 64-bit mode before accessing any memory.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The radix guest is not subject to the paravirtualized HPT VRMA limit,
so remove that from ppc64_rma_size calculation for that platform.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This removes the RMA limit on powernv platform, which constrains
early allocations such as PACAs and stacks. There are still other
restrictions that must be followed, such as bolted SLB limits, but
real mode addressing has no constraints.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There are several cases outside the normal address space management
where a CPU's entire local TLB is to be flushed:
1. Booting the kernel, in case something has left stale entries in
the TLB (e.g., kexec).
2. Machine check, to clean corrupted TLB entries.
One other place where the TLB is flushed, is waking from deep idle
states. The flush is a side-effect of calling ->cpu_restore with the
intention of re-setting various SPRs. The flush itself is unnecessary
because in the first case, the TLB should not acquire new corrupted
TLB entries as part of sleep/wake (though they may be lost).
This type of TLB flush is coded inflexibly, several times for each CPU
type, and they have a number of problems with ISA v3.0B:
- The current radix mode of the MMU is not taken into account, it is
always done as a hash flushn For IS=2 (LPID-matching flush from host)
and IS=3 with HV=0 (guest kernel flush), tlbie(l) is undefined if
the R field does not match the current radix mode.
- ISA v3.0B hash must flush the partition and process table caches as
well.
- ISA v3.0B radix must flush partition and process scoped translations,
partition and process table caches, and also the page walk cache.
So consolidate the flushing code and implement it in C and inline asm
under the mm/ directory with the rest of the flush code. Add ISA v3.0B
cases for radix and hash, and use the radix flush in radix environment.
Provide a way for IS=2 (LPID flush) to specify the radix mode of the
partition. Have KVM pass in the radix mode of the guest.
Take out the flushes from early cputable/dt_cpu_ftrs detection hooks,
and move it later in the boot process after, the MMU registers are set
up and before relocation is first turned on.
The TLB flush is no longer called when restoring from deep idle states.
This was not be done as a separate step because booting secondaries
uses the same cpu_restore as idle restore, which needs the TLB flush.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The die() oops path contains a serializing lock to prevent oops
messages from being interleaved. In the case of a system reset
initiated oops (e.g., qemu nmi command), __die was being called
which lacks that synchronisation and oops reports could be
interleaved across CPUs.
A recent patch 4388c9b3a6 ("powerpc: Do not send system reset
request through the oops path") changed this to __die to avoid
the debugger() call, but there is no real harm to calling it twice
if the first time fell through. So go back to using die() here.
This was observed to fix the problem.
Fixes: 4388c9b3a6 ("powerpc: Do not send system reset request through the oops path")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 6e032b350c ("powerpc/powernv: Check device-tree for RFI flush
settings") uses u64 in asm/hvcall.h without including linux/types.h
This breaks hvcall.h users that do not include the header themselves.
Fixes: 6e032b350c ("powerpc/powernv: Check device-tree for RFI flush settings")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Expose the state of the RFI flush (enabled/disabled) via debugfs, and
allow it to be enabled/disabled at runtime.
eg: $ cat /sys/kernel/debug/powerpc/rfi_flush
1
$ echo 0 > /sys/kernel/debug/powerpc/rfi_flush
$ cat /sys/kernel/debug/powerpc/rfi_flush
0
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
The recent commit 87590ce6e3 ("sysfs/cpu: Add vulnerability folder")
added a generic folder and set of files for reporting information on
CPU vulnerabilities. One of those was for meltdown:
/sys/devices/system/cpu/vulnerabilities/meltdown
This commit wires up that file for 64-bit Book3S powerpc.
For now we default to "Vulnerable" unless the RFI flush is enabled.
That may not actually be true on all hardware, further patches will
refine the reporting based on the CPU/platform etc. But for now we
default to being pessimists.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This moves the code that loads and unloads the guest SLB values so that
it is done while the guest LPCR value is loaded in the LPCR register.
The reason for doing this is that on POWER9, the behaviour of the
slbmte instruction depends on the LPCR[UPRT] bit. If UPRT is 1, as
it is for a radix host (or guest), the SLB index is truncated to
2 bits. This means that for a HPT guest on a radix host, the SLB
was not being loaded correctly, causing the guest to crash.
The SLB is now loaded much later in the guest entry path, after the
LPCR is loaded, which for a secondary thread is after it sees that
the primary thread has switched the MMU to the guest. The loop that
waits for the primary thread has a branch out to the exit code that
is taken if it sees that other threads have commenced exiting the
guest. Since we have now not loaded the SLB at this point, we make
this path branch to a new label 'guest_bypass' and we move the SLB
unload code to before this label.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This fixes a bug where it is possible to enter a guest on a POWER9
system without having the XIVE (interrupt controller) context loaded.
This can happen because we unload the XIVE context from the CPU
before doing the real-mode handling for machine checks. After the
real-mode handler runs, it is possible that we re-enter the guest
via a fast path which does not load the XIVE context.
To fix this, we move the unloading of the XIVE context to come after
the real-mode machine check handler is called.
Fixes: 5af5099385 ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Trap numbers can have extra bits at the bottom that need to
be filtered out. There are a few cases where we don't do that.
It's possible that we got lucky but better safe than sorry.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The only difference between EXC_COMMON_HV and EXC_COMMON is that the
former adds "2" to the trap number which is supposed to represent the
fact that this is an "HV" interrupt which uses HSRR0/1.
However KVM is the only one who cares and it has its own separate macros.
In fact, we only have one user of EXC_COMMON_HV and it's for an
unknown interrupt case. All the other ones already using EXC_COMMON.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
WORD2 if the TIMA isn't byte accessible and
isn't that useful to know about, take out the
pr_devel statement.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We used to not put the newline between the CPU part and the summary
part on UP kernels. This is a rather pointless ifdef so take it out.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
These adapters can be found in a number of our systems, so let's
enable the corresponding drivers by default.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When CONFIG_SWAP is set, the TLB miss handlers have to also take
into account _PAGE_ACCESSED flag. At the moment it is done by
anding _PAGE_ACCESSED into _PAGE_PRESENT using 3 instructions.
This patch uses APG for handling _PAGE_ACCESSED, allowing to
just copy _PAGE_ACCESSED bit into APG field, hence reducing the
action to a single instruction.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As Linux kernel separates KERNEL and USER address spaces, there is
therefore no need to flag USER access at page level.
Today, the 8xx TLB handlers already handle user access in the L1 entry
through Access Protection Groups, it is then natural to move the user
access handling at PMD level once _PAGE_NA allows to handle PAGE_NONE
protection without _PAGE_USER
In the mean time, as we free up one bit in the PTE, we can use it to
include SPS (page size flag) in the PTE and avoid handling it at every
TLB miss hence removing special handling based on compiled page size.
For _PAGE_EXEC, we rework it to use PP PTE bits, avoiding the copy
of _PAGE_EXEC bit into the L1 entry. Unfortunatly we are not
able to put it at the correct location as it conflicts with
NA/RO/RW bits for data entries.
Upper bits of APG in L1 entry overlap with PMD base address. In
order to avoid having to filter that out, we set up all groups so that
upper bits can have any value.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Today, PAGE_NONE is defined as a page not having _PAGE_USER.
In some circunstances, when the CPU supports it, it might be
better to be able to flag a page with NO ACCESS.
In a following patch, the 8xx will switch user access being flagged
in the PMD, therefore it will not be possible anymore to use
_PAGE_USER as a way to flag a page with no access.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
commit ac29c64089 ("powerpc/mm: Replace _PAGE_USER with
_PAGE_PRIVILEGED") introduced _PAGE_PRIVILEGED for BOOK3S/64
This patch generalises _PAGE_PRIVILEGED for all CPUs, allowing
to have either _PAGE_PRIVILEGED or _PAGE_USER or both.
PPC_8xx has a _PAGE_SHARED flag which is set for and only for
all non user pages. Lets rename it _PAGE_PRIVILEGED to remove
confusion as it has nothing to do with Linux shared pages.
On BookE, there's a _PAGE_BAP_SR which has to be set for kernel
pages: defining _PAGE_PRIVILEGED as _PAGE_BAP_SR will make
this generic
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
_PAGE_WRITETHRU is only used in:
* AMIGA_Z2RAM block driver which is never activated on powerPC
* Video/FB driver which is for PPC_PMAC
Therefore, no need to spend time in 8xx TLB miss handlers for
handling it.
And by removing it, we free up bit 20 which then avoids having
to clear it on each TLB miss.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In TLB miss handlers, updating the perf counter is only useful
when performing a perf analysis. As it has a noticeable overhead,
let's only do it when needed.
In order to do so, the exit of the miss handlers will be patched
when starting/stopping 'perf': the first register restore
instruction of each exit point will be replaced by a jump to
the counting code.
Once this is done, CONFIG_PPC_8xx_PERF_EVENT becomes useless as
this feature doesn't add any overhead.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
EXCEPTION_PROLOG_0 and EXCEPTION_EPILOG_0 were added some
time ago in order to regroup the two mtspr/mfspr to SCRATCH0 and
SCRATCH1 and the mfcr/mtcr in order to ease entry and exit of
function not using the full EXCEPTION_PROLOG.
Since then, the mfcr/mtcr has been taken out, hence just leaving
the two mtspr/mfspr in the macro.
In order to improve readability of the exception functions, we
remove those two macros and copy back the two mtspr/mfspr instead.
As r10 and r11 are used for SCRATCH0 and SCRATCH1, lets also use
r12 for SCRATCH2. It will also improve the readability/maintenance.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
CPU6 ERRATA affects only MPC860 revisions prior to C.0. Manufacturing
of those revisiosn was stopped in 1999-2000.
Therefore, it has been almost 20 years since this ERRATA has been
fixed in the silicon.
This patch removes the workaround for that ERRATA.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since commit 0e6e01ff69 ("CPM/QE: use genalloc to manage CPM/QE
muram"), rheap is not used anymore.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Certain HMI's such as malfunction error propagate through
all threads/core on the system. If a thread was offline
prior to us crashing the system and jumping to the kdump
kernel, bad things happen when it wakes up due to an HMI
in the kdump kernel.
There are several possible ways to solve this problem
1. Put the offline cores in a state such that they are
not woken up for machine check and HMI errors. This
does not work, since we might need to wake up offline
threads to handle TB errors
2. Ignore HMI errors, setup HMEER to mask HMI errors,
but this still leads the window open for any MCEs
and masking them for the duration of the dump might
be a concern
3. Wake up offline CPUs, as in send them to
crash_ipi_callback (not wake them up as in mark them
online as seen by the hotplug). kexec does a
wake_online_cpus() call, this patch does something
similar, but instead sends an IPI and forces them to
crash_ipi_callback()
This patch takes approach #3.
Care is taken to enable this only for powenv platforms
via crash_wake_offline (a global value set at setup
time). The crash code sends out IPI's to all CPU's
which then move to crash_ipi_callback and kexec_smp_wait().
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Our check was extra cautious, we've audited crash_send_ipi
and it sends an IPI only to online CPU's. Removal of this
check should have not functional impact on crash kdump.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instead of manually coding the loop with of_find_node_by_type(), let's
switch to the standard macro for iterating over nodes with given type.
Also fixed a couple of refcount leaks in the aforementioned loops.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch remove CONFIG_PPC_HTDUMP if not PPC_BOOK3S_64 to avoid
below compile failure on BOOK3S_32:
In file included from arch/powerpc/mm/dump_hashpagetable.c:27:0:
./arch/powerpc/include/asm/plpar_wrappers.h: In function 'get_cede_latency_hint':
./arch/powerpc/include/asm/plpar_wrappers.h:27:2: error: implicit declaration of function 'get_lppaca' [-Werror=implicit-function-declaration]
...
arch/powerpc/mm/dump_hashpagetable.c: At top level:
arch/powerpc/mm/dump_hashpagetable.c:69:13: error: 'SLB_VSID_B' undeclared here (not in a function)
...
arch/powerpc/mm/dump_hashpagetable.c:506:38: error: 'VMEMMAP_BASE' undeclared (first use in this function)
arch/powerpc/mm/dump_hashpagetable.c:506:35: error: assignment makes integer from pointer without a cast [-Werror]
Fixes: dd5ac03e09 ("powerpc/mm: Fix page table dump build on non-Book3S")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Trim change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add required bits to the architecture vector to enable support
of the ibm,dynamic-memory-v2 device tree property.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The Power Hypervisor has introduced a new device tree format for
the property describing the dynamic reconfiguration LMBs for a system,
ibm,dynamic-memory-v2. This new format condenses the size of the
property, especially on large memory systems, by reporting sets
of LMBs that have the same properties (flags and associativity array
index).
This patch updates the powerpc/mm/drmem.c code to provide routines
that can parse the new device tree format during the walk_drmem_lmb*
routines used during boot, the creation of the LMB array, and updating
the device tree to create a new property in the proper format for
ibm,dynamic-memory-v2.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that the powerpc code parses dynamic reconfiguration memory
LMB information from the LMB array and not the device tree
directly we can move the of_drconf_cell struct to drmem.h where
it fits better.
In addition, the struct is renamed to of_drconf_cell_v1 in
anticipation of upcoming support for version 2 of the dynamic
reconfiguration property and the members are typed as __be*
values to reflect how they exist in the device tree.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Update the pseries memory hotplug code to use the newly added
dynamic reconfiguration LMB array. Doing this is required for the
upcoming support of version 2 of the dynamic reconfiguration
device tree property.
In addition, making this change cleans up the code that parses the
LMB information as we no longer need to worry about device tree
format. This allows us to discard one of the first steps on memory
hotplug where we make a working copy of the device tree property and
convert the entire property to cpu format. Instead we just use the
LMB array directly while holding the memory hotplug lock.
This patch also moves the updating of the device tree property to
powerpc/mm/drmem.c. This allows to the hotplug code to work without
needing to know the device tree format and provides a single
routine for updating the device tree property. This new routine
will handle determination of the proper device tree format and
generate a properly formatted device tree property.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Update code in powerpc/numa.c to use the walk_drmem_lmbs()
routine instead of parsing the device tree directly. This is
in anticipation of introducing a new ibm,dynamic-memory-v2
property with a different format. This will allow the numa code
to use a single initialization routine per-LMB irregardless of
the device tree format.
Additionally, to support additional routines in numa.c that need
to look up LMB information, an late_init routine is added to drmem.c
to allocate the array of LMB information. This LMB array will provide
per-LMB information to separate the LMB data from the device tree
format.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We currently have code to parse the dynamic reconfiguration LMB
information from the ibm,dynamic-meory device tree property in
multiple locations; numa.c, prom.c, and pseries/hotplug-memory.c.
In anticipation of adding support for a version 2 of the
ibm,dynamic-memory property this patch aims to separate the device
tree information from the device tree format.
Doing this requires a two step process to avoid a possibly very large
bootmem allocation early in boot. During initial boot, new routines
are provided to walk the device tree property and make a call-back
for each LMB.
The second step (introduced in later patches) will allocate an
array of LMB information that can be used directly without needing
to know the DT format.
This approach provides the benefit of consolidating the device tree
property parsing to a single location and (eventually) providing
a common data structure for retrieving LMB information.
This patch introduces a routine to walk the ibm,dynamic-memory
property in the flattened device tree and updates the prom.c code
to use this to initialize memory.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Look up the associativity arrays in of_drconf_to_nid_single when
deriving the nid for a LMB instead of having it passed in as a
parameter.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Look up the device node for the usable memory property instead
of having it passed in as a parameter. This changes precedes an update
in which the calling routines for of_get_usable_memory() will not have
the device node pointer to pass in.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Look up the device node for the associativity array property instead
of having it passed in as a parameter. This changes precedes an update
in which the calling routines for of_get_assoc_arrays() will not have
the device node pointer to pass in.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Among the existing architecture specific versions of
copy_siginfo_to_user32 there are several different implementation
problems. Some architectures fail to handle all of the cases in in
the siginfo union. Some architectures perform a blind copy of the
siginfo union when the si_code is negative. A blind copy suggests the
data is expected to be in 32bit siginfo format, which means that
receiving such a signal via signalfd won't work, or that the data is
in 64bit siginfo and the code is copying nonsense to userspace.
Create a single instance of copy_siginfo_to_user32 that all of the
architectures can share, and teach it to handle all of the cases in
the siginfo union correctly, with the assumption that siginfo is
stored internally to the kernel is 64bit siginfo format.
A special case is made for x86 x32 format. This is needed as presence
of both x32 and ia32 on x86_64 results in two different 32bit signal
formats. By allowing this small special case there winds up being
exactly one code base that needs to be maintained between all of the
architectures. Vastly increasing the testing base and the chances of
finding bugs.
As the x86 copy of copy_siginfo_to_user32 the call of the x86
signal_compat_build_tests were moved into sigaction_compat_abi, so
that they will keep running.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This adds a register identifier for use with the one_reg interface
to allow the decrementer expiry time to be read and written by
userspace. The decrementer expiry time is in guest timebase units
and is equal to the sum of the decrementer and the guest timebase.
(The expiry time is used rather than the decrementer value itself
because the expiry time is not constantly changing, though the
decrementer value is, while the guest vcpu is not running.)
Without this, a guest vcpu migrated to a new host will see its
decrementer set to some random value. On POWER8 and earlier, the
decrementer is 32 bits wide and counts down at 512MHz, so the
guest vcpu will potentially see no decrementer interrupts for up
to about 4 seconds, which will lead to a stall. With POWER9, the
decrementer is now 56 bits side, so the stall can be much longer
(up to 2.23 years) and more noticeable.
To help work around the problem in cases where userspace has not been
updated to migrate the decrementer expiry time, we now set the
default decrementer expiry at vcpu creation time to the current time
rather than the maximum possible value. This should mean an
immediate decrementer interrupt when a migrated vcpu starts
running. In cases where the decrementer is 32 bits wide and more
than 4 seconds elapse between the creation of the vcpu and when it
first runs, the decrementer would have wrapped around to positive
values and there may still be a stall - but this is no worse than
the current situation. In the large-decrementer case, we are sure
to get an immediate decrementer interrupt (assuming the time from
vcpu creation to first run is less than 2.23 years) and we thus
avoid a very long stall.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The function copy_siginfo_from_user32 is used for two things, in ptrace
since the dawn of siginfo for arbirarily modifying a signal that
user space sees, and in sigqueueinfo to send a signal with arbirary
siginfo data.
Create a single copy of copy_siginfo_from_user32 that all architectures
share, and teach it to handle all of the cases in the siginfo union.
In the generic version of copy_siginfo_from_user32 ensure that all
of the fields in siginfo are initialized so that the siginfo structure
can be safely copied to userspace if necessary.
When copying the embedded sigval union copy the si_int member. That
ensures the 32bit values passes through the kernel unchanged.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
NSIGTRAP is 4 in the generic siginfo and powerpc just undefines
NSGTRAP and redefine it as 4. That accomplishes nothing so remove
the duplication.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
--EWB Added #ifdef CONFIG_X86_X32_ABI to arch/x86/kernel/signal_compat.c
Changed #ifdef CONFIG_X86_X32 to #ifdef CONFIG_X86_X32_ABI in
linux/compat.h
CONFIG_X86_X32 is set when the user requests X32 support.
CONFIG_X86_X32_ABI is set when the user requests X32 support
and the tool-chain has X32 allowing X32 support to be built.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
We'll need that name for a generic implementation soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Lift the code from x86 so that we behave consistently. In the future we
should probably warn if any of these is set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
One fix for an oops at boot if we take a hotplug interrupt before we are ready
to handle it.
The bulk is patches to implement mitigation for Meltdown, see the change logs
for more details.
Thanks to:
Nicholas Piggin, Michael Neuling, Oliver O'Halloran, Jon Masters, Jose Ricardo
Ziviani, David Gibson.
-----BEGIN PGP SIGNATURE-----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=UZHv
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.15-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One fix for an oops at boot if we take a hotplug interrupt before we
are ready to handle it.
The bulk is patches to implement mitigation for Meltdown, see the
change logs for more details.
Thanks to: Nicholas Piggin, Michael Neuling, Oliver O'Halloran, Jon
Masters, Jose Ricardo Ziviani, David Gibson"
* tag 'powerpc-4.15-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: Check device-tree for RFI flush settings
powerpc/pseries: Query hypervisor for RFI flush settings
powerpc/64s: Support disabling RFI flush with no_rfi_flush and nopti
powerpc/64s: Add support for RFI flush of L1-D cache
powerpc/64s: Convert slb_miss_common to use RFI_TO_USER/KERNEL
powerpc/64: Convert fast_exception_return to use RFI_TO_USER/KERNEL
powerpc/64: Convert the syscall exit path to use RFI_TO_USER/KERNEL
powerpc/64s: Simple RFI macro conversions
powerpc/64: Add macros for annotating the destination of rfid/hrfid
powerpc/pseries: Add H_GET_CPU_CHARACTERISTICS flags & wrapper
powerpc/pseries: Make RAS IRQ explicitly dependent on DLPAR WQ
Setting si_code to 0 results in a userspace seeing an si_code of 0.
This is the same si_code as SI_USER. Posix and common sense requires
that SI_USER not be a signal specific si_code. As such this use of 0
for the si_code is a pretty horribly broken ABI.
Further use of si_code == 0 guaranteed that copy_siginfo_to_user saw a
value of __SI_KILL and now sees a value of SIL_KILL with the result
that uid and pid fields are copied and which might copying the si_addr
field by accident but certainly not by design. Making this a very
flakey implementation.
Utilizing FPE_FIXME and TRAP_FIXME, siginfo_layout() will now return
SIL_FAULT and the appropriate fields will be reliably copied.
Possible ABI fixes includee:
- Send the signal without siginfo
- Don't generate a signal
- Possibly assign and use an appropriate si_code
- Don't handle cases which can't happen
Cc: Paul Mackerras <paulus@samba.org>
Cc: Kumar Gala <kumar.gala@freescale.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Ref: 9bad068c24d7 ("[PATCH] ppc32: support for e500 and 85xx")
Ref: 0ed70f6105ef ("PPC32: Provide proper siginfo information on various exceptions.")
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
We need to consistently enforce that keyed hashes cannot be used without
setting the key. To do this we need a reliable way to determine whether
a given hash algorithm is keyed or not. AF_ALG currently does this by
checking for the presence of a ->setkey() method. However, this is
actually slightly broken because the CRC-32 algorithms implement
->setkey() but can also be used without a key. (The CRC-32 "key" is not
actually a cryptographic key but rather represents the initial state.
If not overridden, then a default initial state is used.)
Prepare to fix this by introducing a flag CRYPTO_ALG_OPTIONAL_KEY which
indicates that the algorithm has a ->setkey() method, but it is not
required to be called. Then set it on all the CRC-32 algorithms.
The same also applies to the Adler-32 implementation in Lustre.
Also, the cryptd and mcryptd templates have to pass through the flag
from their underlying algorithm.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This will be used by KVM in order to keep escalation interrupts
in the non-EOI (masked) state after they fire. They will be
re-enabled directly in HW by KVM when needed.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
From xive.h to xive-regs.h since it's a HW register definition
and it can be used from assembly
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Use pci_get_domain_bus_and_slot() with a domain number of 0 as the code
is not ready to consume multiple domains and existing code used domain
number 0.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Four commits here, including two that were tagged but never merged.
Three of them are for the HPT resizing code; two of those fix a
user-triggerable use-after-free in the host, and one that fixes
stale TLB entries in the guest. The remaining commit fixes a bug
causing PR KVM guests under PowerVM to fail to start.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaVfPgAAoJEJ2a6ncsY3GfA10IANZMkwtIpqxGlsAeXKr5bWdl
iXYD9ymb2/FOHBbg6v8Eh6Gb1ycjzXpXqn74/Y9TE4Ort7mdiH+W6kXYEsMqL8yg
7Uwnj8DuWFuFxX0x0V4SJQzgdCnOefVcfoo/RnLUzmLsW0Vqtr3A1djM5iHlxFvv
ntkNtGYPOoaHl6rjtfHTDfLWN/DzEJbaIU/0O1LIkBxPG4STzSXErAucLL46Pa/X
NuPO2HfpxQiacHVG62iy89eJeAcraEAXnH5e6eVPRQQqh3DSIERMU6n6jXyZeMU5
NWX8Qme3VGBpiJOiCGMvMrnJmQmMTSWTtkGljyaFy+vZWMqGZ6xJ3wIP+5t9d+Q=
=dw6K
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-fixes-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master
PPC KVM fixes for 4.15
Four commits here, including two that were tagged but never merged.
Three of them are for the HPT resizing code; two of those fix a
user-triggerable use-after-free in the host, and one that fixes
stale TLB entries in the guest. The remaining commit fixes a bug
causing PR KVM guests under PowerVM to fail to start.
A headline should be quickly put into a sequence. Thus use the
function "seq_puts" instead of "seq_printf" for this purpose.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
On Book3S in HV mode, we don't use the vcpu->arch.dec field at all.
Instead, all logic is built around vcpu->arch.dec_expires.
So let's remove the one remaining piece of code that was setting it.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Add #defines for the Completion Timeout Disable feature and use them. No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
We want to use the dma_direct_ namespace for a generic implementation,
so rename powerpc to the second best choice: dma_nommu_.
Signed-off-by: Christoph Hellwig <hch@lst.de>
And unlike the other helpers we don't require a <asm/dma-direct.h> as
this helper is a special case for ia64 only, and this keeps it as
simple as possible.
Signed-off-by: Christoph Hellwig <hch@lst.de>
phys_to_dma, dma_to_phys and dma_capable are helpers published by
architecture code for use of swiotlb and xen-swiotlb only. Drivers are
not supposed to use these directly, but use the DMA API instead.
Move these to a new asm/dma-direct.h helper, included by a
linux/dma-direct.h wrapper that provides the default linear mapping
unless the architecture wants to override it.
In the MIPS case the existing dma-coherent.h is reused for now as
untangling it will take a bit of work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Robin Murphy <robin.murphy@arm.com>
This causes warnings from cpufreq mutex code. This is also rather
unnecessary and ineffective. If we really want to prevent concurrent
unplug, we could take the unplug read lock but I don't see this being
critical.
Fixes: cd77b5ce20 ("powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo")
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remember when the biggest problem we had to worry about was hashed
pointers, those were the days.
These were missed in my earlier patch because they don't match "%p",
but the macro is hiding a "%p", so these all end up being hashed,
which is not what we want in xmon. Convert them to "%px".
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
New device-tree properties are available which tell the hypervisor
settings related to the RFI flush. Use them to determine the
appropriate flush instruction to use, and whether the flush is
required.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A new hypervisor call is available which tells the guest settings
related to the RFI flush. Use it to query the appropriate flush
instruction(s), and whether the flush is required.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Because there may be some performance overhead of the RFI flush, add
kernel command line options to disable it.
We add a sensibly named 'no_rfi_flush' option, but we also hijack the
x86 option 'nopti'. The RFI flush is not the same as KPTI, but if we
see 'nopti' we can guess that the user is trying to avoid any overhead
of Meltdown mitigations, and it means we don't have to educate every
one about a different command line option.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On some CPUs we can prevent the Meltdown vulnerability by flushing the
L1-D cache on exit from kernel to user mode, and from hypervisor to
guest.
This is known to be the case on at least Power7, Power8 and Power9. At
this time we do not know the status of the vulnerability on other CPUs
such as the 970 (Apple G5), pasemi CPUs (AmigaOne X1000) or Freescale
CPUs. As more information comes to light we can enable this, or other
mechanisms on those CPUs.
The vulnerability occurs when the load of an architecturally
inaccessible memory region (eg. userspace load of kernel memory) is
speculatively executed to the point where its result can influence the
address of a subsequent speculatively executed load.
In order for that to happen, the first load must hit in the L1,
because before the load is sent to the L2 the permission check is
performed. Therefore if no kernel addresses hit in the L1 the
vulnerability can not occur. We can ensure that is the case by
flushing the L1 whenever we return to userspace. Similarly for
hypervisor vs guest.
In order to flush the L1-D cache on exit, we add a section of nops at
each (h)rfi location that returns to a lower privileged context, and
patch that with some sequence. Newer firmwares are able to advertise
to us that there is a special nop instruction that flushes the L1-D.
If we do not see that advertised, we fall back to doing a displacement
flush in software.
For guest kernels we support migration between some CPU versions, and
different CPUs may use different flush instructions. So that we are
prepared to migrate to a machine with a different flush instruction
activated, we may have to patch more than one flush instruction at
boot if the hypervisor tells us to.
In the end this patch is mostly the work of Nicholas Piggin and
Michael Ellerman. However a cast of thousands contributed to analysis
of the issue, earlier versions of the patch, back ports testing etc.
Many thanks to all of them.
Tested-by: Jon Masters <jcm@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The KVM_PPC_ALLOCATE_HTAB ioctl(), implemented by kvmppc_alloc_reset_hpt()
is supposed to completely clear and reset a guest's Hashed Page Table (HPT)
allocating or re-allocating it if necessary.
In the case where an HPT of the right size already exists and it just
zeroes it, it forces a TLB flush on all guest CPUs, to remove any stale TLB
entries loaded from the old HPT.
However, that situation can arise when the HPT is resizing as well - or
even when switching from an RPT to HPT - so those cases need a TLB flush as
well.
So, move the TLB flush to trigger in all cases except for errors.
Cc: stable@vger.kernel.org # v4.10+
Fixes: f98a8bf9ee ("KVM: PPC: Book3S HV: Allow KVM_PPC_ALLOCATE_HTAB ioctl() to change HPT size")
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Commit 96df226 ("KVM: PPC: Book3S PR: Preserve storage control bits")
added code to preserve WIMG bits but it missed 2 special cases:
- a magic page in kvmppc_mmu_book3s_64_xlate() and
- guest real mode in kvmppc_handle_pagefault().
For these ptes, WIMG was 0 and pHyp failed on these causing a guest to
stop in the very beginning at NIP=0x100 (due to bd9166ffe "KVM: PPC:
Book3S PR: Exit KVM on failed mapping").
According to LoPAPR v1.1 14.5.4.1.2 H_ENTER:
The hypervisor checks that the WIMG bits within the PTE are appropriate
for the physical page number else H_Parameter return. (For System Memory
pages WIMG=0010, or, 1110 if the SAO option is enabled, and for IO pages
WIMG=01**.)
This hence initializes WIMG to non-zero value HPTE_R_M (0x10), as expected
by pHyp.
[paulus@ozlabs.org - fix compile for 32-bit]
Cc: stable@vger.kernel.org # v4.11+
Fixes: 96df226 "KVM: PPC: Book3S PR: Preserve storage control bits"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Ruediger Oertel <ro@suse.de>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Construct the init thread stack in the linker script rather than doing it
by means of a union so that ia64's init_task.c can be got rid of.
The following symbols are then made available from INIT_TASK_DATA() linker
script macro:
init_thread_union
init_stack
INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the
size of the init stack. init_thread_union is given its own section so that
it can be placed into the stack space in the right order. I'm assuming
that the ia64 ordering is correct and that the task_struct is first and the
thread_info second.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Will Deacon <will.deacon@arm.com> (arm64)
Tested-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
In the SLB miss handler we may be returning to user or kernel. We need
to add a check early on and save the result in the cr4 register, and
then we bifurcate the return path based on that.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Similar to the syscall return path, in fast_exception_return we may be
returning to user or kernel context. We already have a test for that,
because we conditionally restore r13. So use that existing test and
branch, and bifurcate the return based on that.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In the syscall exit path we may be returning to user or kernel
context. We already have a test for that, because we conditionally
restore r13. So use that existing test and branch, and bifurcate the
return based on that.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This commit does simple conversions of rfi/rfid to the new macros that
include the expected destination context. By simple we mean cases
where there is a single well known destination context, and it's
simply a matter of substituting the instruction for the appropriate
macro.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The rfid/hrfid ((Hypervisor) Return From Interrupt) instruction is
used for switching from the kernel to userspace, and from the
hypervisor to the guest kernel. However it can and is also used for
other transitions, eg. from real mode kernel code to virtual mode
kernel code, and it's not always clear from the code what the
destination context is.
To make it clearer when reading the code, add macros which encode the
expected destination context.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A new hypervisor call has been defined to communicate various
characteristics of the CPU to guests. Add definitions for the hcall
number, flags and a wrapper function.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We are moving towards separate kernel and module function descriptor
dereference callbacks. This patch enables it for powerpc64.
For pointers that belong to the kernel
- Added __start_opd and __end_opd pointers, to track the kernel
.opd section address range;
- Added dereference_kernel_function_descriptor(). Now we
will dereference only function pointers that are within
[__start_opd, __end_opd);
For pointers that belong to a module
- Added dereference_module_function_descriptor() to handle module
function descriptor dereference. Now we will dereference only
pointers that are within [module->opd.start, module->opd.end).
Link: http://lkml.kernel.org/r/20171109234830.5067-4-sergey.senozhatsky@gmail.com
To: Tony Luck <tony.luck@intel.com>
To: Fenghua Yu <fenghua.yu@intel.com>
To: Helge Deller <deller@gmx.de>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Paul Mackerras <paulus@samba.org>
To: Michael Ellerman <mpe@ellerman.id.au>
To: James Bottomley <jejb@parisc-linux.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-ia64@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Santosh Sivaraj <santosh@fossix.org> #powerpc
Signed-off-by: Petr Mladek <pmladek@suse.com>
No functional changes, just untangling the call chain and document
why the altmap is passed around the hotplug code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
We can just pass this on instead of having to do a radix tree lookup
without proper locking a few levels into the callchain.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
We can just pass this on instead of having to do a radix tree lookup
without proper locking 2 levels into the callchain.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
We can just pass this on instead of having to do a radix tree lookup
without proper locking a few levels into the callchain.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
We can just pass this on instead of having to do a radix tree lookup
without proper locking 2 levels into the callchain.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The hotplug code uses its own workqueue to handle IRQ requests
(pseries_hp_wq), however that workqueue is initialized after
init_ras_IRQ(). That can lead to a kernel panic if any hotplug
interrupts fire after init_ras_IRQ() but before pseries_hp_wq is
initialised. eg:
UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes)
NET: Registered protocol family 1
Unpacking initramfs...
(qemu) object_add memory-backend-ram,id=mem1,size=10G
(qemu) device_add pc-dimm,id=dimm1,memdev=mem1
Unable to handle kernel paging request for data at address 0xf94d03007c421378
Faulting instruction address: 0xc00000000012d744
Oops: Kernel access of bad area, sig: 11 [#1]
LE SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-ziviani+ #26
task: (ptrval) task.stack: (ptrval)
NIP: c00000000012d744 LR: c00000000012d744 CTR: 0000000000000000
REGS: (ptrval) TRAP: 0380 Not tainted (4.15.0-rc2-ziviani+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 28088042 XER: 20040000
CFAR: c00000000012d3c4 SOFTE: 0
...
NIP [c00000000012d744] __queue_work+0xd4/0x5c0
LR [c00000000012d744] __queue_work+0xd4/0x5c0
Call Trace:
[c0000000fffefb90] [c00000000012d744] __queue_work+0xd4/0x5c0 (unreliable)
[c0000000fffefc70] [c00000000012dce4] queue_work_on+0xb4/0xf0
This commit makes the RAS IRQ registration explicitly dependent on the
creation of the pseries_hp_wq.
Reported-by: Min Deng <mdeng@redhat.com>
Reported-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Tested-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Just one fix to correctly return SEGV_ACCERR when we take a SEGV on a mapped
region. The bug was introduced in the refactoring of the page fault handler we
did in the previous release.
Thanks to:
John Sperbeck.
-----BEGIN PGP SIGNATURE-----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=VAzk
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"Just one fix to correctly return SEGV_ACCERR when we take a SEGV on a
mapped region. The bug was introduced in the refactoring of the page
fault handler we did in the previous release.
Thanks to John Sperbeck"
* tag 'powerpc-4.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Fix SEGV on mapped region to return SEGV_ACCERR
Now that every architecture is using the generic clkdev.h file
and we no longer include asm/clkdev.h anywhere in the tree, we
can remove it.
Cc: Russell King <linux@armlinux.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
net/ipv6/ip6_gre.c is a case of parallel adds.
include/trace/events/tcp.h is a little bit more tricky. The removal
of in-trace-macro ifdefs in 'net' paralleled with moving
show_tcp_state_name and friends over to include/trace/events/sock.h
in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull x86 PTI preparatory patches from Thomas Gleixner:
"Todays Advent calendar window contains twentyfour easy to digest
patches. The original plan was to have twenty three matching the date,
but a late fixup made that moot.
- Move the cpu_entry_area mapping out of the fixmap into a separate
address space. That's necessary because the fixmap becomes too big
with NRCPUS=8192 and this caused already subtle and hard to
diagnose failures.
The top most patch is fresh from today and cures a brain slip of
that tall grumpy german greybeard, who ignored the intricacies of
32bit wraparounds.
- Limit the number of CPUs on 32bit to 64. That's insane big already,
but at least it's small enough to prevent address space issues with
the cpu_entry_area map, which have been observed and debugged with
the fixmap code
- A few TLB flush fixes in various places plus documentation which of
the TLB functions should be used for what.
- Rename the SYSENTER stack to CPU_ENTRY_AREA stack as it is used for
more than sysenter now and keeping the name makes backtraces
confusing.
- Prevent LDT inheritance on exec() by moving it to arch_dup_mmap(),
which is only invoked on fork().
- Make vysycall more robust.
- A few fixes and cleanups of the debug_pagetables code. Check
PAGE_PRESENT instead of checking the PTE for 0 and a cleanup of the
C89 initialization of the address hint array which already was out
of sync with the index enums.
- Move the ESPFIX init to a different place to prepare for PTI.
- Several code moves with no functional change to make PTI
integration simpler and header files less convoluted.
- Documentation fixes and clarifications"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/cpu_entry_area: Prevent wraparound in setup_cpu_entry_area_ptes() on 32bit
init: Invoke init_espfix_bsp() from mm_init()
x86/cpu_entry_area: Move it out of the fixmap
x86/cpu_entry_area: Move it to a separate unit
x86/mm: Create asm/invpcid.h
x86/mm: Put MMU to hardware ASID translation in one place
x86/mm: Remove hard-coded ASID limit checks
x86/mm: Move the CR3 construction functions to tlbflush.h
x86/mm: Add comments to clarify which TLB-flush functions are supposed to flush what
x86/mm: Remove superfluous barriers
x86/mm: Use __flush_tlb_one() for kernel memory
x86/microcode: Dont abuse the TLB-flush interface
x86/uv: Use the right TLB-flush API
x86/entry: Rename SYSENTER_stack to CPU_ENTRY_AREA_entry_stack
x86/doc: Remove obvious weirdnesses from the x86 MM layout documentation
x86/mm/64: Improve the memory map documentation
x86/ldt: Prevent LDT inheritance on exec
x86/ldt: Rework locking
arch, mm: Allow arch_dup_mmap() to fail
x86/vsyscall/64: Warn and fail vsyscall emulation in NATIVE mode
...
Of note is two fixes for KVM XIVE (Power9 interrupt controller). These would
normally go via the KVM tree but Paul is away so I've picked them up.
Other than that, two fixes for error handling in the IMC driver, and one for a
potential oops in the BHRB code if the hardware records a branch address that
has subsequently been unmapped, and finally a s/%p/%px/ in our oops code.
Thanks to:
Anju T Sudhakar, Cédric Le Goater, Laurent Vivier, Madhavan Srinivasan, Naveen
N. Rao, Ravi Bangoria.
-----BEGIN PGP SIGNATURE-----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=d5wh
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"This is all fairly boring, except that there's two KVM fixes that
you'd normally get via Paul's kvm-ppc tree. He's away so I picked them
up. I was waiting to see if he would apply them, which is why they
have only been in my tree since today. But they were on the list for a
while and have been tested on the relevant hardware.
Of note is two fixes for KVM XIVE (Power9 interrupt controller). These
would normally go via the KVM tree but Paul is away so I've picked
them up.
Other than that, two fixes for error handling in the IMC driver, and
one for a potential oops in the BHRB code if the hardware records a
branch address that has subsequently been unmapped, and finally a
s/%p/%px/ in our oops code.
Thanks to: Anju T Sudhakar, Cédric Le Goater, Laurent Vivier, Madhavan
Srinivasan, Naveen N. Rao, Ravi Bangoria"
* tag 'powerpc-4.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Fix pending_pri value in kvmppc_xive_get_icp()
KVM: PPC: Book3S: fix XIVE migration of pending interrupts
powerpc/kernel: Print actual address of regs when oopsing
powerpc/perf: Fix kfree memory allocated for nest pmus
powerpc/perf/imc: Fix nest-imc cpuhotplug callback failure
powerpc/perf: Dereference BHRB entries safely
In order to sanitize the LDT initialization on x86 arch_dup_mmap() must be
allowed to fail. Fix up all instances.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: dan.j.williams@intel.com
Cc: hughd@google.com
Cc: keescook@google.com
Cc: kirill.shutemov@linux.intel.com
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Lots of overlapping changes. Also on the net-next side
the XDP state management is handled more in the generic
layers so undo the 'net' nfp fix which isn't applicable
in net-next.
Include a necessary change by Jakub Kicinski, with log message:
====================
cls_bpf no longer takes care of offload tracking. Make sure
netdevsim performs necessary checks. This fixes a warning
caused by TC trying to remove a filter it has not added.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
pte_access_premitted get called in get_user_pages_fast path. If we
have marked the pte PROT_NONE, we should not allow a read access on
the address. With the current implementation we are not checking the
READ and only check for WRITE. This is needed on archs like ppc64 that
implement PROT_NONE using _PAGE_USER access instead of _PAGE_PRESENT.
Also add pte_user check just to make sure we are not accessing kernel
mapping.
Even though there is code duplication, keeping the low level pte
accessors different for different platforms helps in code readability.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pte_access_premitted get called in get_user_pages_fast path. If we
have marked the pte PROT_NONE, we should not allow a read access on
the address. With the current implementation we are not checking the
READ and only check for WRITE. This is needed on archs like ppc64 that
implement PROT_NONE using RWX access instead of _PAGE_PRESENT. Also
add pte_user check just to make sure we are not accessing kernel
mapping.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
No functional change in this patch. This update gup_hugepte to use the
helper. This will help later when we add memory keys.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we migrate a VM from a POWER8 host (XICS) to a POWER9 host
(XICS-on-XIVE), we have an error:
qemu-kvm: Unable to restore KVM interrupt controller state \
(0xff000000) for CPU 0: Invalid argument
This is because kvmppc_xics_set_icp() checks the new state
is internaly consistent, and especially:
...
1129 if (xisr == 0) {
1130 if (pending_pri != 0xff)
1131 return -EINVAL;
...
On the other side, kvmppc_xive_get_icp() doesn't set
neither the pending_pri value, nor the xisr value (set to 0)
(and kvmppc_xive_set_icp() ignores the pending_pri value)
As xisr is 0, pending_pri must be set to 0xff.
Fixes: 5af5099385 ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When restoring a pending interrupt, we are setting the Q bit to force
a retrigger in xive_finish_unmask(). But we also need to force an EOI
in this case to reach the same initial state : P=1, Q=0.
This can be done by not setting 'old_p' for pending interrupts which
will inform xive_finish_unmask() that an EOI needs to be sent.
Fixes: 5af5099385 ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The H_PAGE_F_SECOND,H_PAGE_F_GIX are not in the 64K main-PTE.
capture these changes in the dump pte report.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard