Call secure services to enable ACTLR[0] (Enable invalidates of BTB with
ICIALLU) when branch hardening is enabled for kernel.
On GP devices OMAP5/DRA7, there is no possibility to update secure
side since "secure world" is ROM and there are no override mechanisms
possible. On HS devices, appropriate PPA should do the workarounds as
well.
However, the configuration is only done for secondary core, since it is
expected that firmware/bootloader will have enabled the required
configuration for the primary boot core (note: bootloaders typically
will NOT enable secondary processors, since it has no need to do so).
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
When removing the global bit from __supported_pte_mask do the same for
__default_kernel_pte_mask in order to avoid the WARN_ONCE() in
check_pgprot() when setting a kernel pte before having called
init_mem_mapping().
Cc: <stable@vger.kernel.org> # 4.17
Reported-by: Michael Young <m.a.young@durham.ac.uk>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
The PCI subsystem in question for this quirk rule has been
identified as a Gigabyte GA-Z170X-Gaming 7 motherboard. Set the
device name appropriately.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Reviewed-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These motherboards have Sound Core3D and apparently "support"
Recon3Di. Added to the quirk list as QUIRK_R3DI.
Issue report, PCI Subsystem ID, and testing by a contributor on
IRC who wished to remain anonymous.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Reviewed-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dynamic ftrace requires modifying the code segments that are usually
set to read-only. To do this, a per arch function is called both before
and after the ftrace modifications are performed. The "before" function
will set kernel code text to read-write to allow for ftrace to make the
modifications, and the "after" function will set the kernel code text
back to "read-only" to keep the kernel code text protected.
The issue happens when dynamic ftrace is tested at boot up. The test is
done before the kernel code text has been set to read-only. But the
"before" and "after" calls are still performed. The "after" call will
change the kernel code text to read-only prematurely, and other boot
code that expects this code to be read-write will fail.
The solution is to add a variable that is set when the kernel code text
is expected to be converted to read-only, and make the ftrace "before"
and "after" calls do nothing if that variable is not yet set. This is
similar to the x86 solution from commit 1623963097 ("ftrace, x86:
make kernel text writable only for conversions").
Link: http://lkml.kernel.org/r/20180620212906.24b7b66e@vmware.local.home
Reported-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Fix memory leak in the error path of mlx5_ib_create_srq() by making sure
to free the allocated srq.
Fixes: c2b37f7648 ("IB/mlx5: Fix integer overflows in mlx5_ib_create_srq")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW0ZhphQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlxwAP4jKOp86ljtdqHSlh9mOHChnvwdMprQ
kaQ82WiamGikIwD/Vo/6ynsVl5eYMDO2VQSv6W1DHmhV9I/KgdqcQBl8jAk=
=RF9o
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.18-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull kprobe fix from Steven Rostedt:
"This fixes a memory leak in the kprobe code"
* tag 'trace-v4.18-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/kprobe: Release kprobe print_fmt properly
We don't release tk->tp.call.print_fmt when destroying
local uprobe. Also there's missing print_fmt kfree in
create_local_trace_kprobe error path.
Link: http://lkml.kernel.org/r/20180709141906.2390-1-jolsa@kernel.org
Cc: stable@vger.kernel.org
Fixes: e12f03d703 ("perf/core: Implement the 'perf_kprobe' PMU")
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull libata fixes from Tejun Heo:
- Jens's patches to expand the usable command depth from 31 to 32 broke
sata_fsl due to a subtle command iteration bug. Fixed by introducing
explicit iteration helpers and using the correct variant.
- On some laptops, enabling LPM by default reportedly led to occasional
hard hangs. Blacklist the affected cases.
- Other misc fixes / changes.
* 'for-4.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ata: Remove depends on HAS_DMA in case of platform dependency
ata: Fix ZBC_OUT all bit handling
ata: Fix ZBC_OUT command block check
ahci: Add Intel Ice Lake LP PCI ID
ahci: Disable LPM on Lenovo 50 series laptops with a too old BIOS
sata_nv: remove redundant pointers sdev0 and sdev1
sata_fsl: remove dead code in tag retrieval
sata_fsl: convert to command iterator
libata: convert eh to command iterators
libata: add command iterator helpers
ata: ahci_mvebu: ahci_mvebu_stop_engine() can be static
libahci: Fix possible Spectre-v1 pmp indexing in ahci_led_store()
mdev_access() calls mbochs_get_page() with mdev_state->ops_lock held,
while mbochs_get_page() locks the mutex by itself.
It leads to unavoidable deadlock.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Incremental patch to fix the unchecked dereference in acpi_nfit_ctl.
Reported by Dan Carpenter:
"acpi/nfit: fix cmd_rc for acpi_nfit_ctl to
always return a value" from Jun 28, 2018, leads to the following
Smatch complaint:
drivers/acpi/nfit/core.c:578 acpi_nfit_ctl()
warn: variable dereferenced before check 'cmd_rc' (see line 411)
drivers/acpi/nfit/core.c
410
411 *cmd_rc = -EINVAL;
^^^^^^^^^^^^^^^^^^
Patch adds unchecked dereference.
Fixes: c1985cefd8 ("acpi/nfit: fix cmd_rc for acpi_nfit_ctl to always return a value")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Here are a few char/misc driver fixes for 4.18-rc5.
The "largest" stuff here is fixes for the UIO changes in 4.18-rc1 that
caused breakages for some people. Thanks to Xiubo Li for fixing them
quickly. Other than that, minor fixes for thunderbolt, vmw_balloon,
nvmem, mei, ibmasm, and mei drivers. There's also a MAINTAINERS update
where Rafael is offering to help out with reviewing driver core patches.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW0Xg+Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynuzwCeP5imDvO+/phRkeuwpchIusaBZDIAoIsVjdoa
UXNqthmixT4kmZzkdw4/
=NB+C
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are a few char/misc driver fixes for 4.18-rc5.
The "largest" stuff here is fixes for the UIO changes in 4.18-rc1 that
caused breakages for some people. Thanks to Xiubo Li for fixing them
quickly. Other than that, minor fixes for thunderbolt, vmw_balloon,
nvmem, mei, ibmasm, and mei drivers. There's also a MAINTAINERS update
where Rafael is offering to help out with reviewing driver core
patches.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
nvmem: Don't let a NULL cell_id for nvmem_cell_get() crash us
thunderbolt: Notify userspace when boot_acl is changed
uio: fix crash after the device is unregistered
uio: change to use the mutex lock instead of the spin lock
uio: use request_threaded_irq instead
fpga: altera-cvp: Fix an error handling path in 'altera_cvp_probe()'
ibmasm: don't write out of bounds in read handler
MAINTAINERS: Add myself as driver core changes reviewer
mei: discard messages from not connected client during power down.
vmw_balloon: fix inflation with batching
Here are two tiny staging driver fixes for reported issues for 4.18-rc5.
One fixes the r8822be driver to properly work on lots of new laptops,
the other is for the rtl8723bs driver to fix an underflow error.
Both have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW0XhgA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykbzQCfU3lTlrBWUWs2dWWhd8ZzrhGqrPcAoIT5o0aM
seu3sLtRW05DzOWxHc8V
=RB+r
-----END PGP SIGNATURE-----
Merge tag 'staging-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are two tiny staging driver fixes for reported issues for
4.18-rc5.
One fixes the r8822be driver to properly work on lots of new laptops,
the other is for the rtl8723bs driver to fix an underflow error.
Both have been in linux-next for a while with no reported issues"
* tag 'staging-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8822be: Fix RTL8822be can't find any wireless AP
staging: rtl8723bs: Prevent an underflow in rtw_check_beacon_data().
Here are a number of small USB fixes for 4.18-rc5.
Nothing major here, just the normal set of new device ids, xhci fixes,
and some typec fixes. The typec fix required some tiny changes in an
i2c driver, which that maintainer acked to come through my tree.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW0XiBA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymHjwCfVF5vUleTpR/oQbiBOK2EeO2cO9IAnA0R+BIk
Il4iFFI6GNkFhYDwePFm
=E35c
-----END PGP SIGNATURE-----
Merge tag 'usb-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB fixes for 4.18-rc5.
Nothing major here, just the normal set of new device ids, xhci fixes,
and some typec fixes. The typec fix required some tiny changes in an
i2c driver, which that maintainer acked to come through my tree.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: yurex: fix out-of-bounds uaccess in read handler
usb: quirks: add delay quirks for Corsair Strafe
xhci: xhci-mem: off by one in xhci_stream_id_to_ring()
usb/gadget: aspeed-vhub: add USB_LIBCOMPOSITE dependency
docs: kernel-parameters.txt: document xhci-hcd.quirks parameter
USB: serial: mos7840: fix status-register error handling
USB: serial: keyspan_pda: fix modem-status error handling
USB: serial: cp210x: add another USB ID for Qivicon ZigBee stick
USB: serial: ch341: fix type promotion bug in ch341_control_in()
i2c-cht-wc: Fix bq24190 supplier
typec: tcpm: Correctly report power_supply current and voltage for non pd supply
usb: xhci: dbc: Don't decrement runtime PM counter if DBC is not started
Address a regression in ACPICA that ceased to clear the status of
GPEs and fixed events before entering the ACPI S5 (off) system
state during the 4.17 cycle which caused some systems to power up
immediately after they had been turned off.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=4PiS
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Address a regression in ACPICA that ceased to clear the status of GPEs
and fixed events before entering the ACPI S5 (off) system state during
the 4.17 cycle which caused some systems to power up immediately after
they had been turned off"
* tag 'acpi-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Clear status of all events when entering S5
It does not matter if the caller of may_use_simd() migrates to
another cpu after the call, but it is still important that the
kernel_neon_busy percpu instance that is read matches the cpu the
task is running on at the time of the read.
This means that raw_cpu_read() is not sufficient. kernel_neon_busy
may appear true if the caller migrates during the execution of
raw_cpu_read() and the next task to be scheduled in on the initial
cpu calls kernel_neon_begin().
This patch replaces raw_cpu_read() with this_cpu_read() to protect
against this race.
Cc: <stable@vger.kernel.org>
Fixes: cb84d11e16 ("arm64: neon: Remove support for nested or hardirq kernel-mode NEON")
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Yandong Zhao <yandong77520@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Fix a regression introduced in Linux kernel 4.17 where sending a SCSI
command that does not transfer data (such as TEST UNIT READY) via
/dev/bsg/* results in EINVAL.
Fixes: 17cb960f29 ("bsg: split handling of SCSI CDBs vs transport requeues")
Cc: <stable@vger.kernel.org> # 4.17+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Builds started failing in Fedora on Python 3.7 with:
`.gnu.debuglto_.debug_macro' referenced in section
`.gnu.debuglto_.debug_macro' of
util/scripting-engines/trace-event-python.o: defined in discarded
section
In Fedora, Python 3.7 added -flto to the list of --cflags and since it
was only applied to util/scripting-engines/trace-event-python.c and
scripts/python/Perf-Trace-Util/Context.c, linking failed.
It's not the first time the addition of flags has broken builds: commit
c6707fdef7 ("perf tools: Fix up build in hardnened environments")
appears to have fixed a similar problem. "python-config --includes"
provides the proper -I flags and doesn't introduce additional CFLAGS.
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180710154612.6285-1-jcline@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The dictionaries are attached to the parameter tuple that steals the
references and takes care of releasing them when appropriate. The code
should not decrement the reference counts explicitly. E.g. if libpython
has been built with reference debugging enabled, the superfluous DECREFs
will trigger this error when running perf script:
Fatal Python error: Objects/tupleobject.c:238 object at
0x7f10f2041b40 has negative ref count -1
Aborted (core dumped)
If the reference debugging is not enabled, the superfluous DECREFs might
cause the dict objects to be silently released while they are still in
use. This may trigger various other assertions or just cause perf
crashes and/or weird and unexpected data changes in the stored Python
objects.
Signed-off-by: Janne Huttunen <janne.huttunen@nokia.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jaroslav Skarvada <jskarvad@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1531133990-17485-1-git-send-email-janne.huttunen@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We are getting following warnings on gcc8 that break compilation:
$ make
CC jvmti/jvmti_agent.o
jvmti/jvmti_agent.c: In function ‘jvmti_open’:
jvmti/jvmti_agent.c:252:35: error: ‘/jit-’ directive output may be truncated \
writing 5 bytes into a region of size between 1 and 4096 [-Werror=format-truncation=]
snprintf(dump_path, PATH_MAX, "%s/jit-%i.dump", jit_path, getpid());
There's no point in checking the result of snprintf call in
jvmti_open, the following open call will fail in case the
name is mangled or too long.
Using tools/lib/ function scnprintf that touches the return value from
the snprintf() calls and thus get rid of those warnings.
$ make DEBUG=1
CC arch/x86/util/perf_regs.o
arch/x86/util/perf_regs.c: In function ‘arch_sdt_arg_parse_op’:
arch/x86/util/perf_regs.c:229:4: error: ‘strncpy’ output truncated before terminating nul
copying 2 bytes from a string of the same length [-Werror=stringop-truncation]
strncpy(prefix, "+0", 2);
^~~~~~~~~~~~~~~~~~~~~~~~
Using scnprintf instead of the strncpy (which we know is safe in here)
to get rid of that warning.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180702134202.17745-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allows a perf shell test developer to concurrently edit and run their
test scripts, avoiding perf test attempts to execute their editor
temporary files, such as seen here:
$ sudo taskset -c 0 ./perf test -vvvvvvvv -F 63
63: 0VIM 8.0 :
--- start ---
sh: 1: ./tests/shell/.record+probe_libc_inet_pton.sh.swp: Permission denied
---- end ----
0VIM 8.0: FAILED!
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180629124658.15a506b41fc4539c08eb9426@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like system(), popen() calls /bin/sh, which may/may not be bash.
Script when run on dash and encounters the line, yields:
exit: Illegal number: -1
checkbashisms report on script content:
possible bashism (exit|return with negative status code):
exit -1
Remove the bashism and use the more portable non-zero failure
status code 1.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180629124652.8d0af7e2281fd3fd8262cacc@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Debian based systems such as Ubuntu have dash as their default shell.
Even if the normal or root user's shell is bash, certain scripts still
call /bin/sh, which points to dash, so we fix this perf test by
rewriting it in a more portable way.
BEFORE:
$ sudo perf test -v 64
64: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 31942
./tests/shell/record+probe_libc_inet_pton.sh: 18: ./tests/shell/record+probe_libc_inet_pton.sh: expected[0]=ping[][0-9 \.:]+probe_libc:inet_pton: \([[:xdigit:]]+\): not found
./tests/shell/record+probe_libc_inet_pton.sh: 19: ./tests/shell/record+probe_libc_inet_pton.sh: expected[1]=.*inet_pton\+0x[[:xdigit:]]+[[:space:]]\(/lib/x86_64-linux-gnu/libc-2.27.so|inlined\)$: not found
./tests/shell/record+probe_libc_inet_pton.sh: 29: ./tests/shell/record+probe_libc_inet_pton.sh: expected[2]=getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/lib/x86_64-linux-gnu/libc-2.27.so\)$: not found
./tests/shell/record+probe_libc_inet_pton.sh: 30: ./tests/shell/record+probe_libc_inet_pton.sh: expected[3]=.*\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$: not found
ping 31963 [004] 83577.670613: probe_libc:inet_pton: (7fe15f87f4b0)
./tests/shell/record+probe_libc_inet_pton.sh: 39: ./tests/shell/record+probe_libc_inet_pton.sh: Bad substitution
./tests/shell/record+probe_libc_inet_pton.sh: 41: ./tests/shell/record+probe_libc_inet_pton.sh: Bad substitution
test child finished with -2
---- end ----
probe libc's inet_pton & backtrace it with ping: Skip
AFTER:
$ sudo perf test -v 64
64: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 32277
ping 32295 [001] 83679.690020: probe_libc:inet_pton: (7ff244f504b0)
7ff244f504b0 __GI___inet_pton+0x0 (/lib/x86_64-linux-gnu/libc-2.27.so)
7ff244f14ce4 getaddrinfo+0x124 (/lib/x86_64-linux-gnu/libc-2.27.so)
556ac036b57d _init+0xb75 (/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180629124643.2089b3ce59960eba34e87b27@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we do not specify bash (and/or zsh) as a requirement, use the
standard error redirection that is more widely supported.
BEFORE:
$ sudo perf test -v 62
62: Check open filename arg using perf trace + vfs_getname:
--- start ---
test child forked, pid 27305
./tests/shell/trace+probe_vfs_getname.sh: 20: ./tests/shell/trace+probe_vfs_getname.sh: Syntax error: "&" unexpected
test child finished with -2
---- end ----
Check open filename arg using perf trace + vfs_getname: Skip
AFTER:
$ sudo perf test -v 62
64: Check open filename arg using perf trace + vfs_getname :
--- start ---
test child forked, pid 23008
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
0.361 ( 0.008 ms): touch/23032 openat(dfd: CWD, filename: /tmp/temporary_file.VEh0n, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 4
test child finished with 0
---- end ----
Check open filename arg using perf trace + vfs_getname: Ok
Similar to commit 35435cd060, with the same title.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180629124633.0a9f4bea54b8d2c28f265de2@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python 2 and Python 3 in EventClass.py. ``print`` is now a
function rather than a statement. This should have no functional change.
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Herton Krzesinski <herton@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/0100016341a73aac-e0734bdc-dcab-4c61-8333-d8be97524aa0-000000@email.amazonses.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python 2 and Python 3 in the sched-migration.py script.
This should have no functional change.
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Herton Krzesinski <herton@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/0100016341a737a5-44ec436f-3440-4cac-a03f-ddfa589bf308-000000@email.amazonses.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python 2 and Python 3 in Util.py. The dict class no longer
has a ``has_key`` method and print is now a function rather than a
statement. This should have no functional change.
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Herton Krzesinski <herton@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/0100016341a730c6-8db8b9b1-da2d-4ee3-96bf-47e0ae9796bd-000000@email.amazonses.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a single syntax error in SchedGui.py to support both Python 2 and
Python 3. This should have no functional change.
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Herton Krzesinski <herton@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/0100016341a72d26-75729663-fe55-4309-8c9b-302e065ed2f1-000000@email.amazonses.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python 2 and Python 3 in Core.py. This should have no
functional change.
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Herton Krzesinski <herton@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/0100016341a72ebe-e572899e-f445-4765-98f0-c314935727f9-000000@email.amazonses.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Hans de Goede reported that his mixed EFI mode Bay Trail tablet
would not boot at all any more, but enter a reboot loop without
any logs printed by the kernel.
Unbreak 64-bit Linux/x86 on 32-bit UEFI:
When it was first introduced, the EFI stub code that copies the
contents of PCI option ROMs originally only intended to do so if
the EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM attribute was *not* set.
The reason was that the UEFI spec permits PCI option ROM images
to be provided by the platform directly, rather than via the ROM
BAR, and in this case, the OS can only access them at runtime if
they are preserved at boot time by copying them from the areas
described by PciIo->RomImage and PciIo->RomSize.
However, it implemented this check erroneously, as can be seen in
commit:
dd5fc854de ("EFI: Stash ROMs if they're not in the PCI BAR")
which introduced:
if (!attributes & EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM)
continue;
and given that the numeric value of EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM
is 0x4000, this condition never becomes true, and so the option ROMs
were copied unconditionally.
This was spotted and 'fixed' by commit:
886d751a2e ("x86, efi: correct precedence of operators in setup_efi_pci")
but inadvertently inverted the logic at the same time, defeating
the purpose of the code, since it now only preserves option ROM
images that can be read from the ROM BAR as well.
Unsurprisingly, this broke some systems, and so the check was removed
entirely in the following commit:
739701888f ("x86, efi: remove attribute check from setup_efi_pci")
It is debatable whether this check should have been included in the
first place, since the option ROM image provided to the UEFI driver by
the firmware may be different from the one that is actually present in
the card's flash ROM, and so whatever PciIo->RomImage points at should
be preferred regardless of whether the attribute is set.
As this was the only use of the attributes field, we can remove
the call to PciIo->Attributes() entirely, which is especially
nice because its prototype involves uint64_t type by-value
arguments which the EFI mixed mode has trouble dealing with.
Any mixed mode system with PCI is likely to be affected.
Tested-by: Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180711090235.9327-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Greg reported that commit 3c24121039 ("ARM: 8756/1: NOMMU: Postpone
MPU activation till __after_proc_init") is causing breakage for the
old Versatile platform in no-MMU mode (with out-of-tree patches):
AS arch/arm/kernel/head-nommu.o
arch/arm/kernel/head-nommu.S: Assembler messages:
arch/arm/kernel/head-nommu.S:180: Error: selected processor does not support `isb' in ARM mode
scripts/Makefile.build:417: recipe for target 'arch/arm/kernel/head-nommu.o' failed
make[2]: *** [arch/arm/kernel/head-nommu.o] Error 1
Makefile:1034: recipe for target 'arch/arm/kernel' failed
make[1]: *** [arch/arm/kernel] Error 2
Since the code is common for all NOMMU builds usage of the isb was a
bad idea (please, note that isb also used in MPU related code which is
fine because MPU has dependency on CPU_V7/CPU_V7M), instead use more
robust instr_sync assembler macro.
Fixes: 3c24121039 ("ARM: 8756/1: NOMMU: Postpone MPU activation till __after_proc_init")
Reported-by: Greg Ungerer <gerg@kernel.org>
Tested-by: Greg Ungerer <gerg@kernel.org>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
- Use async IPIs for arch_trigger_cpumask_backtrace() in order to
avoid warnings & deadlocks, fixing a problem introduced in v3.19
with the fix trivial to backport as far as v4.9.
- Fix ioremap()'s MMU/TLB backed path to avoid spuriously rejecting
valid requests due to an incorrect belief that the memory region is
backed by potentially-in-use RAM. This fixes a regression in v4.2.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCW0UoBRUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN2QnQD9EzZbdcitwdyd/wCPHi/r2yPJ7eD6
vXuIqWEjs2TujpMA/iVa4uC2myYAP56vjOx66KpgfIXufnQg6b8f5ARgYMIK
=gA7+
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_4.18_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A couple more MIPS fixes for 4.18:
- Use async IPIs for arch_trigger_cpumask_backtrace() in order to
avoid warnings & deadlocks, fixing a problem introduced in v3.19
with the fix trivial to backport as far as v4.9.
- Fix ioremap()'s MMU/TLB backed path to avoid spuriously rejecting
valid requests due to an incorrect belief that the memory region is
backed by potentially-in-use RAM. This fixes a regression in v4.2"
* tag 'mips_fixes_4.18_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Fix ioremap() RAM check
MIPS: Use async IPIs for arch_trigger_cpumask_backtrace()
MIPS: Call dump_stack() from show_regs()
rseq as it was merged does not have rseq_finish_*() in the user-space
selftests anymore. Update the rseq_prepare_unload() helper comment to
adapt to this reality.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-api@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Paul Turner <pjt@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Chris Lameter <cl@linux.com>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180709195155.7654-7-mathieu.desnoyers@efficios.com
This header was introduced in the 4.18 merge window, and rseq does
not need it anymore. Nuke it before the final release.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-api@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Paul Turner <pjt@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Chris Lameter <cl@linux.com>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180709195155.7654-6-mathieu.desnoyers@efficios.com
Declaring the rseq_cs field as a union between __u64 and two __u32
allows both 32-bit and 64-bit kernels to read the full __u64, and
therefore validate that a 32-bit user-space cleared the upper 32
bits, thus ensuring a consistent behavior between native 32-bit
kernels and 32-bit compat tasks on 64-bit kernels.
Check that the rseq_cs value read is < TASK_SIZE.
The asm/byteorder.h header needs to be included by rseq.h, now
that it is not using linux/types_32_64.h anymore.
Considering that only __32 and __u64 types are declared in linux/rseq.h,
the linux/types.h header should always be included for both kernel and
user-space code: including stdint.h is just for u64 and u32, which are
not used in this header at all.
Use copy_from_user()/clear_user() to interact with a 64-bit field,
because arm32 does not implement 64-bit __get_user, and ppc32 does not
64-bit get_user. Considering that the rseq_cs pointer does not need to
be loaded/stored with single-copy atomicity from the kernel anymore, we
can simply use copy_from_user()/clear_user().
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-api@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Paul Turner <pjt@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Chris Lameter <cl@linux.com>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180709195155.7654-5-mathieu.desnoyers@efficios.com
Update rseq uapi header comments to reflect that user-space need to do
thread-local loads/stores from/to the struct rseq fields.
As a consequence of this added requirement, the kernel does not need
to perform loads/stores with single-copy atomicity.
Update the comment associated to the "flags" fields to describe
more accurately that it's only useful to facilitate single-stepping
through rseq critical sections with debuggers.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-api@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Paul Turner <pjt@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Chris Lameter <cl@linux.com>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180709195155.7654-4-mathieu.desnoyers@efficios.com
__get_user()/__put_user() is used to read values for address ranges that
were already checked with access_ok() on rseq registration.
It has been recognized that __get_user/__put_user are optimizing the
wrong thing. Replace them by get_user/put_user across rseq instead.
If those end up showing up in benchmarks, the proper approach would be to
use user_access_begin() / unsafe_{get,put}_user() / user_access_end()
anyway.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-api@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Paul Turner <pjt@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Chris Lameter <cl@linux.com>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lkml.kernel.org/r/20180709195155.7654-3-mathieu.desnoyers@efficios.com
Change the rseq ABI so rseq_cs start_ip, post_commit_offset and abort_ip
fields are seen as 64-bit fields by both 32-bit and 64-bit kernels rather
that ignoring the 32 upper bits on 32-bit kernels. This ensures we have a
consistent behavior for a 32-bit binary executed on 32-bit kernels and in
compat mode on 64-bit kernels.
Validating the value of abort_ip field to be below TASK_SIZE ensures the
kernel don't return to an invalid address when returning to userspace
after an abort. I don't fully trust each architecture code to consistently
deal with invalid return addresses.
Validating the value of the start_ip and post_commit_offset fields
prevents overflow on arithmetic performed on those values, used to
check whether abort_ip is within the rseq critical section.
If validation fails, the process is killed with a segmentation fault.
When the signature encountered before abort_ip does not match the expected
signature, return -EINVAL rather than -EPERM to be consistent with other
input validation return codes from rseq_get_rseq_cs().
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-api@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Paul Turner <pjt@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Chris Lameter <cl@linux.com>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180709195155.7654-2-mathieu.desnoyers@efficios.com
Currently, arch_mem_timer cpumask is set to cpu_all_mask which should be
fine. However, cpu_possible_mask is more accurate and if there are other
clockevent source in the system which are set to cpu_possible_mask, then
having cpu_all_mask may result in issue.
E.g. on a platform with arm,sp804 timer with rating 300 and
cpu_possible_mask and this arch_mem_timer timer with rating 400 and
cpu_all_mask, tick_check_preferred may choose both preferred as the
cpumasks are not equal though they must be.
This issue was root caused incorrectly initially and a fix was merged as
commit 1332a90558 ("tick: Prefer a lower rating device only if it's CPU
local device").
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/1531151136-18297-2-git-send-email-sudeep.holla@arm.com
This reverts commit 1332a90558.
The original issue was not because of incorrect checking of cpumask for
both new and old tick device. It was incorrectly analysed was due to the
misunderstanding of the comment and misinterpretation of the return value
from tick_check_preferred. The main issue is with the clockevent driver
that sets the cpumask to cpu_all_mask instead of cpu_possible_mask.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1531151136-18297-1-git-send-email-sudeep.holla@arm.com
-----BEGIN PGP SIGNATURE-----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=e1Tg
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2018-07-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This just contains some etnaviv fixes and a MAINTAINERS update for the
new drm tree locations"
* tag 'drm-fixes-2018-07-10' of git://anongit.freedesktop.org/drm/drm:
MAINTAINERS: update drm tree
drm/etnaviv: bring back progress check in job timeout handler
drm/etnaviv: Fix driver unregistering
drm/etnaviv: Check for platform_device_register_simple() failure
This reverts commit 38fc424867.
Distributions such as Fedora and Debian do not package the ELF linker
scripts with their toolchains, resulting in kernel build failures such
as:
| CHK include/generated/compile.h
| LD [M] arch/arm64/crypto/sha512-ce.o
| aarch64-linux-gnu-ld: cannot open linker script file ldscripts/aarch64elf.xr: No such file or directory
| make[1]: *** [scripts/Makefile.build:530: arch/arm64/crypto/sha512-ce.o] Error 1
| make: *** [Makefile:1029: arch/arm64/crypto] Error 2
Revert back to the linux targets for now, adding a comment to the Makefile
so we don't accidentally break this in the future.
Cc: Paul Kocialkowski <contact@paulk.fr>
Cc: <stable@vger.kernel.org>
Fixes: 38fc424867 ("arm64: Use aarch64elf and aarch64elfb emulation mode variants")
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Mail to dri-devel went out, linux-next was updated, but we forgot this
one here.
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706072842.9009-1-daniel.vetter@ffwll.ch
Lucas wrote:
"a couple of small fixes:
- 2 patches from Fabio to fix module reloading
- one patch to fix a userspace visible regression, where the job
timeout is a bit too eager and kills legitimate jobs"
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530868450.15725.8.camel@pengutronix.de
Pull HID fixes from Jiri Kosina:
- spectrev1 pattern fix in hiddev from Gustavo A. R. Silva
- bounds check fix for hid-debug from Daniel Rosenberg
- regression fix for HID autobinding from Benjamin Tissoires
- removal of excessive logging from i2c-hid driver from Jason Andryuk
- fix specific to 2nd generation of Wacom Intuos devices from Jason
Gerecke
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: hiddev: fix potential Spectre v1
HID: i2c-hid: Fix "incomplete report" noise
HID: wacom: Correct touch maximum XY of 2nd-gen Intuos
HID: debug: check length before copy_to_user()
HID: core: allow concurrent registration of drivers
Update my TDA998x HDMI encoder MAINTAINERS entry to include the
dt-bindings header, and a keyword pattern to catch patches containing
the DT compatible. Also change the status to "maintained" rather than
"supported".
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On Tegra30 Cardhu the PCA9546 I2C mux is not ACK'ing I2C commands on
resume from suspend (which is caused by the reset signal for the I2C
mux not being configured correctl). However, this NACK is causing the
Tegra30 to hang on resuming from suspend which is not expected as we
detect NACKs and handle them. The hang observed appears to occur when
resetting the I2C controller to recover from the NACK.
Commit 77821b4678 ("i2c: tegra: proper handling of error cases") added
additional error handling for some error cases including NACK, however,
it appears that this change conflicts with an early fix by commit
f70893d083 ("i2c: tegra: Add delay before resetting the controller
after NACK"). After commit 77821b4678 was made we now disable 'packet
mode' before the delay from commit f70893d083 happens. Testing shows
that moving the delay to before disabling 'packet mode' fixes the hang
observed on Tegra30. The delay was added to give the I2C controller
chance to send a stop condition and so it makes sense to move this to
before we disable packet mode. Please note that packet mode is always
enabled for Tegra.
Fixes: 77821b4678 ("i2c: tegra: proper handling of error cases")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@vger.kernel.org
Nishanth Menon