Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c: In function 'bnxt_vf_rep_rx':
drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c:212:28: warning:
variable 'rx_stats' set but not used [-Wunused-but-set-variable]
struct bnxt_vf_rep_stats *rx_stats;
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
XGMAC2 uses the same CBS mechanism as GMAC5, only registers offset
changes. Lets use the same TC callbacks and implement the .config_cbs
callback in XGMAC2 core.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Radulescu says:
====================
dpaa2-eth: Move DPAA2 Ethernet driver
The Freescale/NXP DPAA2 Ethernet driver was first included in
drivers/staging, due to its dependencies on two components located
there at the time of its initial submission:
* the fsl-mc bus driver, which was moved to drivers/bus in kernel 4.17
* the dpio driver, which was moved to drivers/soc/fsl in kernel 4.18
More information on the DPAA2 architecture and the interactions
between the fsl-mc bus and the objects present on it can be found in:
Documentation/networking/dpaa2/overview.rst
For easier review, the patch is generated without the -M option,
although the driver files are moved without any code changes.
changes since v1[1]:
* remove RFC label, since dependencies have been merged on net-next
* add patch fixing a possible race at probe (reported by Andrew Lunn)
[1] https://lore.kernel.org/patchwork/patch/971333/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The DPAA2 Ethernet driver supports Freescale/NXP SoCs with DPAA2
(DataPath Acceleration Architecture v2). The driver manages
network objects discovered on the fsl-mc bus.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only call netdev_register() at the end of the probe function,
once all other necessary bits and pieces are properly initialized.
We keep the rest of the netdevice initialization code in place,
at the earlier point of the probing sequence, including the
settings previously done in ndo_init.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switch to bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On some boards the interrupt can be shared between multiple devices.
For example on Turris Mox the interrupt is shared between all switches.
Signed-off-by: Marek Behun <marek.behun@nic.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
nl_net is set on entry to ip6_route_info_create. Only devices
within that namespace are considered so no need to reset it
before returning.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make IPv4 consistent with IPv6 and return an extack message that the
ONLINK flag requires a nexthop device.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently a Linux IPv6 TCP sender will change the flow label upon
timeouts to potentially steer away from a data path that has gone
bad. However this does not help if the problem is on the ACK path
and the data path is healthy. In this case the receiver is likely
to receive repeated spurious retransmission because the sender
couldn't get the ACKs in time and has recurring timeouts.
This patch adds another feature to mitigate this problem. It
leverages the DSACK states in the receiver to change the flow
label of the ACKs to speculatively re-route the ACK packets.
In order to allow triggering on the second consecutive spurious
RTO, the receiver changes the flow label upon sending a second
consecutive DSACK for a sequence number below RCV.NXT.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the new locking rule, we have to take tcf_lock
for both ->init() and ->dump(), as RTNL will be removed.
However, it is missing for act_connmark.
Cc: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Provide a software TX timestamp as well as the ethtool query interface
and report the software timestamp capabilities.
Tested with "ethtool -T" and two linuxptp instances each bound to a
tunnel endpoint.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 331a9295de ("net: sched: act: add extack for lookup callback").
This extack is never used after 6 months... In fact, it can be just
set in the caller, right after ->lookup().
Cc: Alexander Aring <aring@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-09-01
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add AF_XDP zero-copy support for i40e driver (!), from Björn and Magnus.
2) BPF verifier improvements by giving each register its own liveness
chain which allows to simplify and getting rid of skip_callee() logic,
from Edward.
3) Add bpf fs pretty print support for percpu arraymap, percpu hashmap
and percpu lru hashmap. Also add generic percpu formatted print on
bpftool so the same can be dumped there, from Yonghong.
4) Add bpf_{set,get}sockopt() helper support for TCP_SAVE_SYN and
TCP_SAVED_SYN options to allow reflection of tos/tclass from received
SYN packet, from Nikita.
5) Misc improvements to the BPF sockmap test cases in terms of cgroup v2
interaction and removal of incorrect shutdown() calls, from John.
6) Few cleanups in xdp_umem_assign_dev() and xdpsock samples, from Prashant.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit gets rid of the structure xdp_umem_props. It was there to
be able to break a dependency at one point, but this is no longer
needed. The values in the struct are instead stored directly in the
xdp_umem structure. This simplifies the xsk code as well as af_xdp
zero-copy drivers and as a bonus gets rid of one internal header file.
The i40e driver is also adapted to the new interface in this commit.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
With certain gcc versions, it was possible to get the warning
"'tx_desc' may be used uninitialized in this function" for the
i40e_xmit_zc. This was not possible, however this commit simplifies
the code path so that this warning is no longer emitted.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
adding selftest for feature, introduced in commit 9452048c79404 ("bpf:
add TCP_SAVE_SYN/TCP_SAVED_SYN options for bpf_(set|get)sockopt").
Signed-off-by: Nikita V. Shirokov <tehnerd@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
- xsks_map size was fixed to 4, changed it MAX_SOCKS
- Remove redundant definition of MAX_SOCKS in xdpsock_user.c
- In dump_stats(), add NULL check for xsks[i]
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Since xdp_umem_query() was added one assignment of bpf.command was
missed from cleanup. Removing the assignment statement.
Fixes: 84c6b86875 ("xsk: don't allow umem replace at stack level")
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Sample program which shows TCP_SAVE_SYN/TCP_SAVED_SYN usage example:
bpf program which is doing TOS/TCLASS reflection (server would reply
with a same TOS/TCLASS as client).
Signed-off-by: Nikita V. Shirokov <tehnerd@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Adding support for two new bpf get/set sockopts: TCP_SAVE_SYN (set)
and TCP_SAVED_SYN (get). This would allow for bpf program to build
logic based on data from ingress SYN packet (e.g. doing tcp's tos/
tclass reflection (see sample prog)) and do it transparently from
userspace program point of view.
Signed-off-by: Nikita V. Shirokov <tehnerd@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Variable 'headroom' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
variable ‘headroom’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jeff Kirsher says:
====================
40GbE Intel Wired LAN Driver Updates 2018-08-30
This series contains updates to i40e, i40evf and virtchnl.
Jake implements helper functions to use an array to handle the queue
stats which reduces the boiler plate code as well as keep the complexity
localized to a few functions.
Paweł adds the ability to change a VF's MAC address from the host side
without having to reload the VF driver on the guest side.
Paul adds a check to ensure that the number of queues that the PF sends
to the VF is equal to or less than the maximum number of queues the VF
can support.
Mitch fixes an issue caught by GCC 8, where we need to not include the
terminating null in the length of the string for strncpy().
Lihong fixes a VF issue to ensure that it does not enter into
promiscuous mode when macvlan is added to the VF. Fixed a potential
crash after a VF is removed, since the workqueue sync for the adminq
task was not being cancelled.
Harshitha fixes the type for field_flags in the virtchnl_filter struct.
Martyna removes an unnecessary check in a conditional if statement.
Björn fixes an issue reported by Jesper Dangaard Brouer, where the
driver was reporting incorrect statistics when XDP was enabled.
Jan fixes the potential reporting of incorrect speed settings.
Patryk fixed an issue where the flag
I40EVF_FLAG_AQ_ENABLE_VLAN_STRIPPING was getting set when any offload is
set via ethtool. Resolved by only setting this flag when VLAN offload
is enabled. Also ensure we hold the rtnl lock when we are clearing the
interrupt scheme. Added a check when deleting the MAC address from the
VF to ensure that the MAC address was not set by the PF and if it was,
do not delete it.
v2: updated patch 2 in the series based on community feedback from David
Miller to inline a function
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
To prevent VF from deleting MAC address that was assigned by the
PF we need to check for that scenario when we try to delete a MAC
address from a VF.
Signed-off-by: Patryk Małek <patryk.malek@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
If a VF is being removed, there is no need to continue with the
workqueue sync for the adminq task, thus cancel it. Without this call,
when VFs are created and removed right away, there might be a chance for
the driver to crash with events stuck in the adminq.
Signed-off-by: Lihong Yang <lihong.yang@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Hold the rtnl lock when we're clearing interrupt scheme
in i40e_shutdown and in i40e_remove.
Signed-off-by: Patryk Małek <patryk.malek@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
With current implementation of i40evf_set_features when user sets
any offload via ethtool we set I40EVF_FLAG_AQ_ENABLE_VLAN_STRIPPING
as a required aq which triggers driver to call
i40evf_enable_vlan_stripping. This shouldn't take place.
This patches fixes it by setting the flag only when VLAN offload
is turned on.
Signed-off-by: Patryk Małek <patryk.malek@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
If our card has been put in an unstable state due to
other drivers interacting with it, speed settings
might be incorrect. If incorrect, forcefully reset them
on open to known default values.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When XDP is enabled, the driver will report incorrect
statistics. Received frames will reported as transmitted frames.
This commits fixes the i40e implementation of ndo_get_stats64 (struct
net_device_ops), so that iproute2 will report correct statistics
(e.g. when running "ip -stats link show dev eth0") even when XDP is
enabled.
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Fixes: 74608d17fe ("i40e: add support for XDP_TX action")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Static analysis tools report a problem from original driver submission.
Removing unnecessary check in condition.
Signed-off-by: Martyna Szapar <martyna.szapar@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The virtchnl_filter struct has a field called field_flags. A previous
commit mistakenly had the type to be a __u8. What we want is for the
field to be an unsigned 8 bit value, so let's just use the existing
kernel type u8 for that.
Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Set IFF_UNICAST_FLT flag for the VF to prevent it from entering
promiscuous mode when macvlan is added to the VF.
Signed-off-by: Lihong Yang <lihong.yang@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Caught by GCC 8. When we provide a length for strncpy, we should not
include the terminating null. So we must tell it one less than the size
of the destination buffer.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
A PF can send any number of queues to the VF and the VF may not
be able to support that many. Check to see that the number of
queues is less than or equal to the max number of queues the
VF can have.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Add possibility to change a VF mac address from host side
without reloading the VF driver on the guest side. Without
this patch it is not possible to change the VF mac because
executing i40evf_virtchnl_completion function with
VIRTCHNL_OP_GET_VF_RESOURCES opcode resets the VF mac
address to previous value.
Signed-off-by: Paweł Jabłoński <pawel.jablonski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Fix a bug in the way we handled VF queues, by always showing stats for
the maximum number of queues, even if they aren't allocated. It is not
safe to change the number of strings reported to ethtool, as grabbing
statistics occurs over multiple ethtool ops for which the rtnl_lock()
cannot be held the entire time.
Avoid this by always reporting queue stats for the maximum number of
queues in the netdevice. Share some of the helper functionality for
adding stats with the PF code in i40e_ethtool_stats.h
This should reduce the chance of potential future bugs, and make adding
new statistics easier.
Note for the queue stats, unlike the PF driver we do not keep an array
of queue pointers, but an array of queues, so care must be taken to
avoid accessing queue memory that hasn't yet been allocated.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Move the boiler plate structures and helper functions we recently
added into their own header file, so that the complete collection is
located together.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Use an i40e_stats array to handle the queue stats, instead of coding
similar functionality separately. Because of how the queue stats are
accessed on some kernels, we can't easily use i40e_add_ethtool_stats.
Instead, implement a separate helper, i40e_add_queue_stats, which we'll
use instead. This helper will correctly implement the
u64_stats_fetch_begin_irq logic and allow retries until successful. We
share the most complex code by re-using i40e_add_one_ethtool_stat.
This logic additionally easily supports skipping disabled rings by using
a ternary operator before calling the u64_stats_fetch_begin_irq()
function, so that we correctly zero-out the stats values without having
to perform two separate sections of code.
This significantly reduces the boiler plate code in
i40e_get_ethtool_stats, and helps keep the complex logic contained to as
few functions as possible.
With this patch, we've finally converted all the statistics to use the
helpers and the i40e_stats function.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Previously, the AF_XDP (XDP_DRV/XDP_SKB copy-mode) ingress logic did
not include XDP meta data in the data buffers copied out to the user
application.
In this commit, we check if meta data is available, and if so, it is
prepended to the frame.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Yonghong Song says:
====================
Commit a26ca7c982 ("bpf: btf: Add pretty print support to the
basic arraymap") and Commit 699c86d6ec ("bpf: btf: add pretty print
for hash/lru_hash maps") added bpffs pretty print for array, hash and
lru hash maps. The pretty print gives users a structurally formatted
dump for keys/values which much easy to understand than raw bytes.
This patch set implemented bpffs pretty print support for
percpu arraymap, percpu hashmap and percpu lru hashmap.
For complex key/value types, the pretty print here is even more useful
due to:
. large volumne of data making it even harder to correlate bytes
to a particular field in a particular cpu.
. kernel rounds the value size for each cpu to multiple of 8.
User has to be aware of this otherwise wrong value may be
derived from cpu 1/2/...
For example, we may have a bpffs pretty print like below:
43602: {
cpu0: {43602,0,-43602,0x3,0xaa52,0x3,{43602|[82,170,0,0,0,0,0,0]},ENUM_TWO}
cpu1: {43602,0,-43602,0x3,0xaa52,0x3,{43602|[82,170,0,0,0,0,0,0]},ENUM_TWO}
cpu2: {43602,0,-43602,0x3,0xaa52,0x3,{43602|[82,170,0,0,0,0,0,0]},ENUM_TWO}
cpu3: {43602,0,-43602,0x3,0xaa52,0x3,{43602|[82,170,0,0,0,0,0,0]},ENUM_TWO}
}
for a percpu map.
This patch also added percpu formatted print on bpftool. For example,
bpftool may print like below:
{
"key": 0,
"values": [{
"cpu": 0,
"value": {
"ui32": 0,
"ui16": 0,
}
},{
"cpu": 1,
"value": {
"ui32": 1,
"ui16": 0,
}
},{
"cpu": 2,
"value": {
"ui32": 2,
"ui16": 0,
}
},{
"cpu": 3,
"value": {
"ui32": 3,
"ui16": 0,
}
}
]
}
Patch #1 implemented bpffs pretty print for percpu arraymap/hash/lru_hash
in kernel. Patch #2 added the test case in tools bpf selftest test_btf.
Patch #3 added percpu map btf based dump.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The bpf selftest test_btf is extended to test bpffs
percpu map pretty print for percpu array, percpu hash and
percpu lru hash.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Added bpffs pretty print for percpu arraymap, percpu hashmap
and percpu lru hashmap.
For each map <key, value> pair, the format is:
<key_value>: {
cpu0: <value_on_cpu0>
cpu1: <value_on_cpu1>
...
cpun: <value_on_cpun>
}
For example, on my VM, there are 4 cpus, and
for test_btf test in the next patch:
cat /sys/fs/bpf/pprint_test_percpu_hash
You may get:
...
43602: {
cpu0: {43602,0,-43602,0x3,0xaa52,0x3,{43602|[82,170,0,0,0,0,0,0]},ENUM_TWO}
cpu1: {43602,0,-43602,0x3,0xaa52,0x3,{43602|[82,170,0,0,0,0,0,0]},ENUM_TWO}
cpu2: {43602,0,-43602,0x3,0xaa52,0x3,{43602|[82,170,0,0,0,0,0,0]},ENUM_TWO}
cpu3: {43602,0,-43602,0x3,0xaa52,0x3,{43602|[82,170,0,0,0,0,0,0]},ENUM_TWO}
}
72847: {
cpu0: {72847,0,-72847,0x3,0x11c8f,0x3,{72847|[143,28,1,0,0,0,0,0]},ENUM_THREE}
cpu1: {72847,0,-72847,0x3,0x11c8f,0x3,{72847|[143,28,1,0,0,0,0,0]},ENUM_THREE}
cpu2: {72847,0,-72847,0x3,0x11c8f,0x3,{72847|[143,28,1,0,0,0,0,0]},ENUM_THREE}
cpu3: {72847,0,-72847,0x3,0x11c8f,0x3,{72847|[143,28,1,0,0,0,0,0]},ENUM_THREE}
}
...
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* new channels in 60 GHz
* clarify (average) ACK signal reporting API
* expose ieee80211_send_layer2_update() for all drivers
* start/stop mac80211's TXQs properly when required
* avoid regulatory restore with IE ignoring
* spelling: contidion -> condition
* fully implement WFA Multi-AP backhaul
-----BEGIN PGP SIGNATURE-----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=BW1J
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-davem-2018-08-29' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Only a few changes at this point:
* new channels in 60 GHz
* clarify (average) ACK signal reporting API
* expose ieee80211_send_layer2_update() for all drivers
* start/stop mac80211's TXQs properly when required
* avoid regulatory restore with IE ignoring
* spelling: contidion -> condition
* fully implement WFA Multi-AP backhaul
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
vxlan_find_mac() unconditionally set f->used for every packet,
this causes a cache miss for every packet, since remote, hlist
and used of vxlan_fdb share the same cache line, which are
accessed when send every packets.
so f->used is set only if not equal to jiffies, to reduce dirty
cache line times, this gives 3% speed-up with small packets.
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Weilin Chang says:
====================
liquidio: improve soft command/response handling
Change soft command handling to fix the possible race condition when the
process handles a response of a soft command that was already freed by an
application which got timeout for this request.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
1. Remove unused functions and data structures.
2. Change the sending of the remaining soft commands to synchronous.
Signed-off-by: Weilin Chang <weilin.chang@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1. Change struct octnic_ctrl_pkt to support synchronous operation.
2. Change code which use structure octnic_ctrl_pkt to send sc's
synchronously.
Signed-off-by: Weilin Chang <weilin.chang@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1. Add wait_for_sc_completion_timeout() for waiting the response and
handling common response errors
2. Send sc's synchronously: remove unused callback function,
and context structure; use wait_for_sc_completion_timeout() to wait
its response.
Signed-off-by: Weilin Chang <weilin.chang@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing