Commit Graph

64 Commits

Author SHA1 Message Date
Linus Torvalds b3345d7c57 ARM: SoC platform changes for 3.17
This is the bulk of new SoC enablement and other platform changes for 3.17:
 
 * Samsung S5PV210 has been converted to DT and multiplatform
 * Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms
 * Kirkwood, one of the popular Marvell platforms, is folded into the
   mvebu platform code, removing mach-kirkwood.
 * Hwmod data for TI AM43xx and DRA7 platforms.
 * More additions of Renesas shmobile platform support
 * Removal of plat-samsung contents that can be removed with S5PV210 being
   multiplatform/DT-enabled and the other two old platforms being removed.
 
 New platforms (most with only basic support right now):
 
 * Hisilicon X5HD2 settop box chipset is introduced
 * Mediatek MT6589 (mobile chipset) is introduced
 * Broadcom BCM7xxx settop box chipset is introduced
 
 + as usual a lot other pieces all over the platform code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJT5Dp+AAoJEIwa5zzehBx3w1sP/0vjT/LQOmC8Lv8RW2Ley2ua
 hNu3HcNPnT/N40JEdU9YNv3q0fdxGgcfKj011CNN+49zPSUf1xduk2wfCAk9yV50
 8Sbt1PfDGm1YyUugGN420CzI431pPoM1OGXHZHkAmg+2J286RtUi3NckB//QDbCY
 QhEjhpYc9SXhAOCGwmB4ab7thOljOFSPzKTLMTu3+PNI5zRPRgkDkt6w9XlsAYmB
 nuR271BnzsROkMzAjycwaJ3kdim7wqrMRfk8g96o0jHSF5qf4zsT5uWYYAjTxdUQ
 8Ajz6zjeHe4+95TwTDcq+lCX6rDLZgwkvCAc6hFbeg0uR7Dyek0h6XMEYtwdjaiU
 KNPwOENrYdENNDAGRpkFp1x4h/rY9Plfru0bBo5o6t7aPBvmNeCDzRtlTtLiUNDV
 dG8sfDMtrS/wFHVjylDSQ60Mb+wuW0XneC8D7chY/iRhIllUYi6YXXvt+/tH5C20
 oYDOWqqcDFSb0sJhE5pn4KBV82ZaHx9jMBWGLl+erg2sDX/SK8SxOkLqKYZKtKB5
 0leOGE3Y+C70xt3G9HftLz2sAvvt+C8UPsApPT+dHNE401TWJOYx6LphPkQKjeeK
 P1iwKi+It3l+FaBypgJy/LeMQRy7EyvDBK2I5WoVL/R2qq14EmP1ui3Tthjj0bhq
 tBBof6P9c8OnRVj1Lz3R
 =5TJ6
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "This is the bulk of new SoC enablement and other platform changes for
  3.17:

   - Samsung S5PV210 has been converted to DT and multiplatform
   - Clock drivers and bindings for some of the lower-end i.MX 1/2
     platforms
   - Kirkwood, one of the popular Marvell platforms, is folded into the
     mvebu platform code, removing mach-kirkwood
   - Hwmod data for TI AM43xx and DRA7 platforms
   - More additions of Renesas shmobile platform support
   - Removal of plat-samsung contents that can be removed with S5PV210
     being multiplatform/DT-enabled and the other two old platforms
     being removed

  New platforms (most with only basic support right now):

   - Hisilicon X5HD2 settop box chipset is introduced
   - Mediatek MT6589 (mobile chipset) is introduced
   - Broadcom BCM7xxx settop box chipset is introduced

  + as usual a lot other pieces all over the platform code"

* tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits)
  ARM: hisi: remove smp from machine descriptor
  power: reset: move hisilicon reboot code
  ARM: dts: Add hix5hd2-dkb dts file.
  ARM: debug: Rename Hi3716 to HIX5HD2
  ARM: hisi: enable hix5hd2 SoC
  ARM: hisi: add ARCH_HISI
  MAINTAINERS: add entry for Broadcom ARM STB architecture
  ARM: brcmstb: select GISB arbiter and interrupt drivers
  ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs
  ARM: configs: enable SMP in bcm_defconfig
  ARM: add SMP support for Broadcom mobile SoCs
  Documentation: arm: misc updates to Marvell EBU SoC status
  Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC
  ARM: mvebu: fix build without platforms selected
  ARM: mvebu: add cpuidle support for Armada 38x
  ARM: mvebu: add cpuidle support for Armada 370
  cpuidle: mvebu: add Armada 38x support
  cpuidle: mvebu: add Armada 370 support
  cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7
  ARM: mvebu: export the SCU address
  ...
2014-08-08 11:14:29 -07:00
Linus Torvalds 44c916d58b ARM: SoC cleanups for 3.17
This merge window brings a good size of cleanups on various
 platforms. Among the bigger ones:
 
 * Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have
   lacked active support for quite a while, and after asking around nobody
   showed interest in keeping them around. If needed, they could be
   resurrected in the future but it's more likely that we would prefer
   reintroduction of them as DT and multiplatform-enabled platforms
   instead.
 * OMAP4 controller code register define diet. They defined a lot of registers
   that were never actually used, etc.
 * Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate)
   to drivers/soc so it can be shared with 64-bit code. This also converts them
   over to traditional driver models where possible.
 * Removal of legacy gpio-samsung driver, since the last users have been
   removed (moved to pinctrl)
 
 Plus a bunch of smaller changes for various platforms that sort of
 dissapear in the diffstat for the above. clps711x cleanups, shmobile
 header file refactoring/moves for multiplatform friendliness, some misc
 cleanups, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJT5DYPAAoJEIwa5zzehBx37egQAIiatNiLLqZnfo3rwGADRz/a
 POfPovktj68aPcobyzoyhFtToMqGvi9PpysyFTIQD2HJFG+5BtiIAuqtg0875zDe
 EpBWgsfugrm0YktJWAtUerj60oAmNPbKfaEm1cOOWuM2lb2mV+QkRrwSTAgsqkT7
 927BzMXKKBRPOVLL0RYhoF8EXa0Eg8kCqAHP8fJrzVYkRp+UrZJDnGiUP1XmWJN+
 VXQMu5SEjcPMtqT7+tfX455RfREHJfBcJ1ZN/dPF8HMWDwClQG0lyc6hifh1MxwO
 8DjIZNkfZeKqgDqVyC17re7pc7p8md5HL8WXbrKpK0A9vQ5bRexbPHxcwJ1T/C2Y
 465H+st5XXbuzV1gbMwjK1/ycsH0tCyffckk8Yl/2e1Fs7GgPNbAELtTdl+5vV1Y
 xmDXkyo/9WlRM3LQ23IGKwW7VzN86EfWVuShssfro0fO7xDdb4OOYLdQI+4bCG+h
 ytQYun1vU32OEyNik5RVNQuZaMrv2c93a3bID4owwuPHPmYOPVUQaqnRX/0E51eA
 aHZYbk2GlUOV3Kq5aSS4iyLg1Yj+I9/NeH9U+A4nc+PQ5FlgGToaVSCuYuw4DqbP
 AAG+sqQHbkBMvDPobQz/yd1qZbAb4eLhGy11XK1t5S65rApWI55GwNXnvbyxqt8x
 wpmxJTASGxcfuZZgKXm7
 =gbcE
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This merge window brings a good size of cleanups on various platforms.
  Among the bigger ones:

   - Removal of Samsung s5pc100 and s5p64xx platforms.  Both of these
     have lacked active support for quite a while, and after asking
     around nobody showed interest in keeping them around.  If needed,
     they could be resurrected in the future but it's more likely that
     we would prefer reintroduction of them as DT and
     multiplatform-enabled platforms instead.

   - OMAP4 controller code register define diet.  They defined a lot of
     registers that were never actually used, etc.

   - Move of some of the Tegra platform code (PMC, APBIO, fuse,
     powergate) to drivers/soc so it can be shared with 64-bit code.
     This also converts them over to traditional driver models where
     possible.

   - Removal of legacy gpio-samsung driver, since the last users have
     been removed (moved to pinctrl)

  Plus a bunch of smaller changes for various platforms that sort of
  dissapear in the diffstat for the above.  clps711x cleanups, shmobile
  header file refactoring/moves for multiplatform friendliness, some
  misc cleanups, etc"

* tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits)
  drivers: CCI: Correct use of ! and &
  video: clcd-versatile: Depend on ARM
  video: fix up versatile CLCD helper move
  MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
  ARM: EXYNOS: Fix build breakge with PM_SLEEP=n
  MAINTAINERS: Remove Kirkwood
  ARM: tegra: Convert PMC to a driver
  soc/tegra: fuse: Set up in early initcall
  ARM: tegra: Always lock the CPU reset vector
  ARM: tegra: Setup CPU hotplug in a pure initcall
  soc/tegra: Implement runtime check for Tegra SoCs
  soc/tegra: fuse: fix dummy functions
  soc/tegra: fuse: move APB DMA into Tegra20 fuse driver
  soc/tegra: Add efuse and apbmisc bindings
  soc/tegra: Add efuse driver for Tegra
  ARM: tegra: move fuse exports to soc/tegra/fuse.h
  ARM: tegra: export apb dma readl/writel
  ARM: tegra: Use a function to get the chip ID
  ARM: tegra: Sort includes alphabetically
  ARM: tegra: Move includes to include/soc/tegra
  ...
2014-08-08 11:00:26 -07:00
Pawel Moll d2168146c2 platform: Remove most references to platform_bus device
A number of board files in arch/arm and arch/unicore32
explicitly reference platform_bus device as a parent
for new platform devices.

This is unnecessary, as platform device API guarantees
that devices with NULL parent are going to by adopted
by the mentioned "root" device.

This patch removes or replaces with NULL such references.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-23 19:09:03 -07:00
Geert Uytterhoeven 1b55353c92 ARM: shmobile: Move r8a7779.h
Change location of r8a7779.h so it can be included as "r8a7779.h"
instead of the old style <mach/r8a7779.h>

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-25 16:52:39 +09:00
Magnus Damm fd44aa5e57 ARM: shmobile: Move common.h
Change location for common.h so it can be used as #include "common.h"
instead of the old style #include <mach/common.h>.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-17 17:09:39 +09:00
Magnus Damm b6bab1263c ARM: shmobile: Move most of irqs.h, keep some for pinctl
Move most of irqs.h so it can be used as #include "irqs.h"
instead of the old style #include <mach/irqs.h>.

Legacy code in drivers/pinctrl needs more work to get rid
of the "mach" portion of the include path, so some part
is left in the original location.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
[horms+renesas@verge.net.au: Do not add trailing blank line to irqs.h]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-17 17:09:38 +09:00
Kevin Hilman 1c928d10fd Renesas ARM based SoC DT updates for v3.14
* Global
   - Use interrupt macros
   - Use #include in device tree sources
   - Tidyup DT node naming
 
 * emev2 (Emma Mobile EV2) SoC
   - Setup internal peripheral interrupts as level high
   - Use interrupt macros in DT files
   - Add clock tree description in DT
 
 * r8a7791 (R-Car M2) SoC
   - Correct GPIO resources
 
 * r8a7791 (R-Car M2) based Koelsch board
   - Configure PFC and GPO
   - Use r8a7791 suffix for IRQC compat string
   - Add DT reference
 
 * r8a7790 (R-Car H2) based Lager board
   - Include all 4 GiB of memory
   - Use r8a7790 suffix for IRQC and MMCIF compat strings
   - Enable MMCIF
   - Add default PFC settings
 
 * r8a7778 (R-Car M1) SoC
   - Suffix for INTC compat string
   - Add HSPI, MMCIF, SDHI and I2C suppport on DTSI
   - Correct pin control device addresses
 
 * r8a7778 (R-Car M1) based Bock-W board
   - Use falling edge IRQ for LAN9221 in DT reference
   - Enable I2C, HSPI0, MMCIF and SDHI
   - Correct MMC pin conflict
   - Remove manual PFC settings from DT reference
   - Add default PFC settings
 
 * r8a7779 (R-Car H1) SoC
   - Add HSPI and SDHI support
   - Suffix for INTC compat string
 
 * r8a7779 (R-Car H1) based Marzen board
   - Enable HSPI0 and SDHI in DTS
   - Remove SDHI0 WP pin setting
   - Use falling edge IRQ for LAN9221 in DT reference
   - Add SDHI support
 
 * r8a7740 (R-Mobile A1) SoC
   - Suffix for INTC compat string
   - Add FSI support via DTSI
   - Use interrupt macros
 
 * r8a7740 based Armadillo board
   - Add FSI support for DTS
   - Use low level IRQ for ST1231 in DT reference
 
 * r8a73a4 (SH-Mobile APE6) SoC
   - Use interrupt macros in DT files
 
 * r8a73a4 (R-Mobile APE6) based ape6evm board
   - Include all 2 GiB of memory
 
 * r8a73a0 (SH-Mobile AG5) SoC
   - Correct SDHI compat string
 
 * r8a73a0 (SH-Mobile AG5) based kzm9d board
   - Add GPIO keys and Add PCF8575 GPIO extender to DT
   - Enable DSW2 with gpio-keys
   - Use falling edge IRQ for LAN9221 in DT reference
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJSqm6XAAoJENfPZGlqN0++pOoQAIgdo3M/CCP56+wAop/nYOfx
 DDdozpEt+V6RcNytVwGEkQboIDMqnekiAvhLiJ7GHT7sMHmf7au2KFkNPpxN+noU
 QVgmJaMsi2AoaoV6T+rc0ice7sve+3gbHE0S49frNVlabNlo69y5Y3prYBzLmfdt
 hefvngIUx6vhosaH00elYhsRTSTd1i5Pkj+jAYQNil1sI+QBJKC61buZrlLPMOfh
 WBMZXKROSN+jIYsqwmz+O7LvqNZa+Wjm9M8NFQnKWkv4fj9on+RZtkLuNo62Yy2P
 AaOM5Z0B2q5q35a7QcsLX23QiHOtkGOXIXehzjakzA56L5kUaZMWdfSUWGXPE+DU
 B163SndwQhRPiYFrb8//Ri5+GQxls6Pw6UKtT7owDMmqkqsYUrJHm7zfu88RcX1O
 UcDrtd3ZlF4XMmr3iNxIRzscFx8faQbIErfG2VornRRkEKLT+ILRvcAedZxkhGLk
 6fs8efTcxR7lvY+7pDtJ1N/xyGGykSnsf0LiCp5BkADamSyhGhqUcr8CjUfjMhKD
 r7WhzbHEQ7FdQ7B4Y8QmxKyH9dC1wNPxB8kZ4m6YjEKFYC95XCehMQhWvbUsx9vM
 jBrvvG7414+t3M2CmROwrs9NujJ0Kf0i6078Hvi06l+w4XYe55ytLUGMnXsJAuCL
 B7aAaVRIAt3UYK7tncK+
 =jkNE
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

From Simon Horman:
Renesas ARM based SoC DT updates for v3.14

* Global
  - Use interrupt macros
  - Use #include in device tree sources
  - Tidyup DT node naming

* emev2 (Emma Mobile EV2) SoC
  - Setup internal peripheral interrupts as level high
  - Use interrupt macros in DT files
  - Add clock tree description in DT

* r8a7791 (R-Car M2) SoC
  - Correct GPIO resources

* r8a7791 (R-Car M2) based Koelsch board
  - Configure PFC and GPO
  - Use r8a7791 suffix for IRQC compat string
  - Add DT reference

* r8a7790 (R-Car H2) based Lager board
  - Include all 4 GiB of memory
  - Use r8a7790 suffix for IRQC and MMCIF compat strings
  - Enable MMCIF
  - Add default PFC settings

* r8a7778 (R-Car M1) SoC
  - Suffix for INTC compat string
  - Add HSPI, MMCIF, SDHI and I2C suppport on DTSI
  - Correct pin control device addresses

* r8a7778 (R-Car M1) based Bock-W board
  - Use falling edge IRQ for LAN9221 in DT reference
  - Enable I2C, HSPI0, MMCIF and SDHI
  - Correct MMC pin conflict
  - Remove manual PFC settings from DT reference
  - Add default PFC settings

* r8a7779 (R-Car H1) SoC
  - Add HSPI and SDHI support
  - Suffix for INTC compat string

* r8a7779 (R-Car H1) based Marzen board
  - Enable HSPI0 and SDHI in DTS
  - Remove SDHI0 WP pin setting
  - Use falling edge IRQ for LAN9221 in DT reference
  - Add SDHI support

* r8a7740 (R-Mobile A1) SoC
  - Suffix for INTC compat string
  - Add FSI support via DTSI
  - Use interrupt macros

* r8a7740 based Armadillo board
  - Add FSI support for DTS
  - Use low level IRQ for ST1231 in DT reference

* r8a73a4 (SH-Mobile APE6) SoC
  - Use interrupt macros in DT files

* r8a73a4 (R-Mobile APE6) based ape6evm board
  - Include all 2 GiB of memory

* r8a73a0 (SH-Mobile AG5) SoC
  - Correct SDHI compat string

* r8a73a0 (SH-Mobile AG5) based kzm9d board
  - Add GPIO keys and Add PCF8575 GPIO extender to DT
  - Enable DSW2 with gpio-keys
  - Use falling edge IRQ for LAN9221 in DT reference

* tag 'renesas-dt-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (102 commits)
  ARM: shmobile: marzen: enable HSPI0 in DTS
  ARM: shmobile: r8a7779: add HSPI support to DTSI
  ARM: shmobile: Use r8a7779 suffix for INTC compat string
  ARM: shmobile: Use r8a7778 suffix for INTC compat string
  ARM: shmobile: Use r8a7740 suffix for INTC compat string
  ARM: shmobile: Use sh73a0 suffix for INTC compat string
  ARM: shmobile: armadillo: add FSI support for DTS
  ARM: shmobile: r8a7740: add FSI support via DTSI
  ARM: shmobile: emev2: Setup internal peripheral interrupts as level high
  ARM: shmobile: emev2: Use interrupt macros in DT files
  ARM: shmobile: Use interrupt macros in r8a73a4 and r8a7778 DT files
  ARM: shmobile: Fix r8a7791 GPIO resources in DTS
  ARM: shmobile: Include all 4 GiB of memory on Lager DT Ref
  ARM: shmobile: Include all 4 GiB of memory on Lager
  ARM: shmobile: Include all 2 GiB of memory on APE6EVM
  ARM: shmobile: Include all 2 GiB of memory on APE6EVM DT Ref
  ARM: shmobile: kzm9g-reference: Add GPIO keys to DT
  ARM: shmobile: kzm9g-reference: Add PCF8575 GPIO extender to DT
  ARM: shmobile: Koelsch DT reference GPIO LED support
  ARM: shmobile: Enable DSW2 with gpio-keys on KZM9D
  ...

Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-20 12:17:18 -08:00
Kuninori Morimoto 9e5a68d2b9 ARM: shmobile: marzen: remove SDHI0 WP pin setting
WP pin is not implemented on Marzen

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10 17:27:10 +09:00
Kuninori Morimoto 2f3927e815 ARM: shmobile: r8a7779: camera-rcar header cleanup
<linux/platform_data/camera-rcar.h> is needed on Marzen,
not setup-r8a7779.c

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-24 15:14:31 +09:00
Kuninori Morimoto 4bd4c5b32b ARM: shmobile: r8a7779: cleanup registration of VIN
VIN driver which needs platform data at the time of
registration is used from Marzen only.
Now, ARM/shmobile aims to support DT,
and the C code base board support will be removed
if DT support is completed.
Current driver registration method which needs platform data
and which is not shared complicates codes.
This means legacy C code cleanup after DT supporting
will be more complicated
This patch registers it on board code as cleanup C code

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-24 15:14:30 +09:00
Max Filippov e6a8b11b82 ARM: shmobile: marzen: enable DMA for SDHI0
Pass HPB-DMA slave IDs in the SDHI0 platform data to enable DMA in the SDHI
driver.

Signed-off-by: Max Filippov <max.filippov@cogentembedded.com>
[Sergei: removed #include <mach/dma.h>]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08 10:02:03 +09:00
Laurent Pinchart df83d90734 ARM: shmobile: marzen: Add Display Unit support
Support the DU0 VGA and DU1 LVDS outputs. DU1 is connected to a
Mitsubishi AA104XD12 panel (10.4" XGA).

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30 16:12:17 +09:00
Linus Torvalds fa91515cbf ARM: Renesas SoC cleanup, refactoring and more SMP support
Lots of cleanup and refactoring and some SMP additions for Renesas
 platforms.  Due to some inter-dependencies with other arm-soc
 branches, this Renesas stuff was separated out for sending after the
 other branches were merged.
 
 Highlights:
 - remove unused board support and cleanup of unused headers
 - refactoring of init and device registration
 - simplify IRQ initialization
 
 Conflicts: Too many. Most of these are because Simon chose to send
 some board updates through the V4L tree that ends up colliding with
 the main platform changes. We'll work with him on sorting out his
 workflow:
 
 - arch/arm/boot/dts/r8a7740.dtsi:
   - Add/add conflict in a devicetree file (keep both)
 
 - arch/arm/mach-shmobile/Makefile:
   - Splitting out of clock files collides with intc move to DT.
     Keep HEAD version but remove intc-* files for R8A7740 and R8A7779.
 
 - arch/arm/mach-shmobile/board-bockw.c:
   - Keep HEAD but remove i2c, hspi and mmc device init calls
 
 - arch/arm/mach-shmobile/board-marzen.c
   - Remove mach/hardware.h include and r8a7779_add_usb_phy_device() call,
     everything else stays.
 
 - arch/arm/mach-shmobile/include/mach/r8a7778.h:
   - From HEAD, Keep camera-rcar.h include and r8a7778_add_vin_device()
   - From branch, keep everything
 
 - arch/arm/mach-shmobile/include/mach/r8a7779.h:
   - From HEAD, Keep only camera-rcar.h include and r8a7779_add_vin_device()
 
 - arch/arm/mach-shmobile/setup-r8a7778.c
   - Keep HEAD, but drop the MMC section (struct resource + add_mmc_device())
   - take the new function name from our side (r8a7778_add_dt_devices())
 
 - arch/arm/mach-shmobile/setup-r8a7779.c
   - Keep HEAD, but drop r8a7779_add_usb_phy_device()
 
 I've also pushed a test-merge2 branch where you can see how I resolved
 them.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSLkaWAAoJEFk3GJrT+8Zl5l8P/3oJ83VJHcjD2fMpAb8Dz5b6
 pdRLxFLJrLxN+WTC1LylPom3EsSAJuuaG3Z8Cr9Xa6yoWuUYLy/A6MwsyLXBOGLC
 3tVWa96xt1cHhd3p/NAOQwvRz/CFdMLM7MStd0mgSihj/pq3jtc2V697+dRtmJih
 J0mIc8+jnig+uwVl1DMCmBqdEmasccaDZeX30PcjaPL9ZDyZBeSXI8brdDx8A21e
 5RiAsqn9HCxrLZjedL9TWA23BJ7NccsI3aVGpQVtCa9N/MHKp8gZft3v8FrWzFjk
 cOeaZY55Xq8hbbbmkF1LoezLrlQDF5aJcj6tl85lyuSJfR5d5BXmLswI7bglw8Qy
 ZU7/aF28pbhUT3oozNuRx5yl8oqpxmUoCwfP5hfnFf590OJ3noIELbOoIZQkJQUy
 LsCf3GMUQaWzrvs0IenM1lMJmw5zfDXbrUWUti95OAd5bbTdBE30z7EouejoKRVh
 1/Wg4keBdtem4CpU+C4fUVtLL4XJhe/uadbjKteA7DRpTRMvrLYNutQgyOAuQjRM
 RiLvDPnsIZEGV+YMsj+IemN0hanae4kR3v8At+HwvVK1hROWEQWyL6cGxXH9n9jB
 VToxoYoyiAOk01X2BnPVMVTXEl5XMAVgZ1IgZNhnhaIUxi3HKrUfNG4oXE5Jx8Lw
 XruUAUKHknTUJ2Q/3y4D
 =Fagt
 -----END PGP SIGNATURE-----

Merge tag 'renesas-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM Renesas SoC cleanup, refactoring and more SMP support from Kevin Hilman:
 "Lots of cleanup and refactoring and some SMP additions for Renesas
  platforms.  Due to some inter-dependencies with other arm-soc
  branches, this Renesas stuff was separated out for sending after the
  other branches were merged.

  Highlights:
   - remove unused board support and cleanup of unused headers
   - refactoring of init and device registration
   - simplify IRQ initialization"

* tag 'renesas-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits)
  ARM: shmobile: Per-CPU SMP boot / sleep code for SCU SoCs
  ARM: shmobile: Introduce per-CPU SMP boot / sleep code
  ARM: shmobile: Use shared SCU CPU Hotplug code on r8a7779
  ARM: shmobile: Use shared SCU CPU Hotplug code on sh73a0
  ARM: shmobile: Add shared SCU CPU Hotplug code
  ARM: shmobile: Use shared SCU SMP boot code on emev2
  ARM: shmobile: Use shared SCU SMP boot code on r8a7779
  ARM: shmobile: Use shared SCU SMP boot code on sh73a0
  ARM: shmobile: Introduce shared SCU SMP boot code
  ARM: shmobile: sh73a0: Remove global GPIO_NR definition
  ARM: shmobile: kzm9d: remove nfsroot settings from bootargs
  ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargs
  ARM: shmobile: r8a7779: move r8a7779_init_irq_xxx() to setup
  ARM: shmobile: r8a7740: move r8a7740_init_irq_of() to setup
  ARM: shmobile: bockw: add missing __initdata
  ARM: shmobile: r8a7790: add missing __initdata
  ARM: shmobile: r8a7779: add missing __initdata
  ARM: shmobile: Remove unused shmobile_init_time()
  ARM: shmobile: Use clocksource_of_init() on r8a7790
  ARM: shmobile: Use default ->init_time() on KZM9G DT ref
  ...
2013-09-09 16:33:57 -07:00
Vladimir Barinov 7cef5e7fd1 [media] ARM: shmobile: Marzen: add VIN and ADV7180 support
Add ADV7180 platform devices on the Marzen board, configure VIN1/3 pins, and
register VIN1/3 devices with the ADV7180 specific platform data.
[Sergei: removed superfluous tabulation and inserted empty lines in the  macro
definition, updated the copyrights, annotated VIN platform data as '__initdata']

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-25 07:34:13 -03:00
Simon Horman 4e0f3fcfe2 Merge branch 'dt2' into cleanup3-base
Conflicts:
	arch/arm/mach-shmobile/Makefile.boot
2013-08-06 18:06:53 +09:00
Kuninori Morimoto 693ac41df3 ARM: shmobile: marzen: Use DT for GIC
Current Marzen is using DT booting,
and r8a7779.dtsi already has GIC settings.

So, we can remove the C version of the GIC setup code,
instead rely on GIC information provided by DT.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06 11:18:40 +09:00
Magnus Damm 7ebbb4ae6f ARM: shmobile: marzen: Switch to DT_MACHINE_START
Convert the marzen board to use DT_MACHINE_START. With this in
place all mach-shmobile boards use DT_MACHINE_START. Also, this
makes it possible for the r8a7779 SMP code to use DT for CPUs.

Signed-off-by: Magnus Damm <damm@opensource.se>
[horms+renesas@verge.net.au: Select USE_OF in Kconfig]
[horms+renesas@verge.net.au: Provide dt_compat in DT_MACHINE_START]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-30 13:28:01 +09:00
Kuninori Morimoto fee529df76 ARM: shmobile: r8a7779: cleanup registration of usb phy
usb phy driver which needs platform data at the time of
registration is used from Marzen only.
Now, ARM/shmobile aims to support DT,
and the C code base board support will be removed
if DT support is completed.
Current driver registration method which needs platform data
and which is not shared complicates codes.
This means legacy C code cleanup after DT supporting
will be more complicated
This patch registers it on board code as cleanup C code

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-30 11:41:11 +09:00
Magnus Damm 85469abe49 ARM: shmobile: Remove Marzen use of <mach/hardware.h>
Remove unused <mach/hardware.h> on Marzen.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-24 16:35:24 +09:00
Linus Torvalds 40e71e7015 ARM SoC board specific changes
These are 18 branches on 9 platforms with board specific changes, mostly
 for defconfig files, but nothing really exciting in here.
 
 Since the shmobile platform still uses board files for some of the newer
 machines, we get a few changes there as the result of drivers getting
 enabled for those boards. This causes some conflicts with contents getting
 added from multiple branches in sh-mobile specific files. Renesas is
 putting a lot of work into migrating to device-tree based setup, which
 will make all those files obsolete in the future and avoid both the
 conflicts and the need to have these files in the first place.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUdLnmmCrR//JCVInAQKNuxAAxXpBslUGRpI8O28KHA3EeL+9HR5wBoKo
 K6q6fQlAv9dcGJOx7fkyHU4UfE1kV+M6l4R9BM8VcjflQjCnG4GrQo8qgJNY14nf
 OpQKSIHEtdBHzFpHEIxogByR1i05hL8nrm21TElgi/aYlDwKbXnApY23ubApPif4
 oXmES9ppXvnz1D7bCE7PaZf+TIgufpPFkioQYcV93nD0x5tYu1mZn2xSfYDekAyU
 mUe1p2oX+77U0lohVQCo1H/ZOJBdoAN1U//2QCiL8YKJitQf/vOVs3QtHEUywIiU
 CyUaDhfM7sX4QKBWzwjxoVOcT6QC/qhaaqaases0gjgjepKaSqUTZMBdLI7oyF3o
 2ExYv8BMGilbIyNUYoxeoqz9zA3IQ7wDxaBh3G1JY9k0/BhKmsEwtGYkSJPdOgpt
 XyX7N/xKzy0lTWf1N4eSWUiccfXdVjLFf3Jp2xA7e/KJfzFAF/RJXdGiV2Kzdr7m
 mZ7ESYRk+S3ENgpI/QI4C6kQ7EBynQjhn5t2+iK9k4gKNspNZ3TjLCQif0v0xE3H
 IIsaSqLBuj9IZ1r13fpQJZIyTr+dHsx2s6QQBFXYzeQ/cjfSRGZP4FmYyweGctfR
 Hh1AAshrOAwNl4ZdXgIT08JKtBocaGFUtt4syvPfAFYoojMN58xg5EG4FYtKpKHp
 xU6w43o6KnQ=
 =7bgc
 -----END PGP SIGNATURE-----

Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board specific changes from Arnd Bergmann:
 "These are 18 branches on 9 platforms with board specific changes,
  mostly for defconfig files, but nothing really exciting in here.

  Since the shmobile platform still uses board files for some of the
  newer machines, we get a few changes there as the result of drivers
  getting enabled for those boards.  This causes some conflicts with
  contents getting added from multiple branches in sh-mobile specific
  files.  Renesas is putting a lot of work into migrating to device-tree
  based setup, which will make all those files obsolete in the future
  and avoid both the conflicts and the need to have these files in the
  first place."

* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (49 commits)
  arm: multi_v7_defconfig: Enable initrd/initramfs support
  arm: multi_v7_defconfig: Enable Zynq UART driver
  ARM: omap2plus_defconfig: enable USB_PHY and NOP_USB_XCEIV
  ARM: OMAP1: nokia770: enable Tahvo
  ARM: OMAP3EVM: Marking omap3_evm_display_init() with CONFIG_BROKEN
  arm: omap: board-overo: reset GPIO for SMSC911x
  ARM: shmobile: BOCK-W: change Ether device name
  ARM: ux500: board-mop500: remove unused pin modes
  ARM: shmobile: bockw: add MMCIF support
  ARM: shmobile: bockw: add SPI FLASH support
  ARM: shmobile: bockw: add I2C device support
  ARM: shmobile: BOCK-W: add Ether support
  ARM: tegra: defconfig updates
  ARM: shmobile: bockw defconfig: add MMCIF support
  ARM: shmobile: bockw defconfig: add M25P80 support
  ARM: shmobile: bockw defconfig: add RTC RX8581 support
  ARM: shmobile: marzen: keep local function as static
  ARM: shmobile: bockw: add SDHI0 support
  ARM: shmobile: marzen: Use INTC External IRQ pin driver for SMSC
  ARM: shmobile: lager: support GPIO switches
  ...
2013-07-02 14:10:26 -07:00
Olof Johansson 3d9f0bd3f7 Renesas ARM-based SoC board updates for v3.11
Highlights:
 bockw: add SDHI0 support
 bockw: add dummy regulators for SMSC
 bockw: Document CN9 SCIF/RCAN dipswitch selection
 lager: support GPIO switches and LEDs
 kzm9g: add AS3711 PMIC platform data
 marzen: Use INTC External IRQ pin driver for SMSC
 ape6evm: Update MP clock parent become EXTAL2 in line with changes
          to r8a73a4 SoC code
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRsZasAAoJENfPZGlqN0++o40P/i4ZszVl144IORaEtNDj9iJ0
 5FSAcUu8VRhgun5bHncnXHrzYUrUJvWey/1oxlwvXERMLE5FDdEEyUIzL2LMAHp/
 NLlZeftHx8xtjUGhetDttrMWKz2/WgAc5gesdcwKWLbWf3TYiExHX1rjdY+EQCew
 e9KWSKqrGS7Va8mTwAtnnQnFGO6iO/l/C5LD8QurZ/uRWT6j3hYn3bX09RpT1H8Z
 v8p/kZeoboPj+dpi6+AmUNEVYdRifEnBG4UV72bANoZoxywlI5wWM+pLw8yLZ0Bq
 dtbSKADAlKgqf9EiXU4p1NTxBr1VVABVXQ4pxXnNkBSXxfrjxXCNMXyFscv8Sc0x
 ZV/8AbquBNbiTIf2+A0rA9gmqPcAlm+x1ZJXWNl2Rng7X14BjFx3CQke8a6+X6lZ
 ZcWeVes0PucsTg6b0lLXqbGJ06yXWOXO4LdeSlMSKomUr3/uuiFLHDCQceBuzG5N
 a3S3lYLlSdost0oW8l80GbiDvetgaPTSf0nhypiSUF+IGVflxtNodgDHuFqZfrUI
 kTKgSnczqg1yC/fE4HA/Q/PiJOE0iqtmaaPVU8Y439siJ0B0x03KO+vEsho3uAwT
 gYYGPM9IQ7c50p1MdDhA7nYvsKulLclbStbQgKNqUSUFneAn9oAxhD8x8Vy7a/sj
 /4H2LrmX3bixWiRGjyZd
 =4juN
 -----END PGP SIGNATURE-----

Merge tag 'renesas-boards-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

From Simon Horman:
Renesas ARM-based SoC board updates for v3.11

Highlights:
bockw: add SDHI0 support
bockw: add dummy regulators for SMSC
bockw: Document CN9 SCIF/RCAN dipswitch selection
lager: support GPIO switches and LEDs
kzm9g: add AS3711 PMIC platform data
marzen: Use INTC External IRQ pin driver for SMSC
ape6evm: Update MP clock parent become EXTAL2 in line with changes
         to r8a73a4 SoC code

* tag 'renesas-boards-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: marzen: keep local function as static
  ARM: shmobile: bockw: add SDHI0 support
  ARM: shmobile: marzen: Use INTC External IRQ pin driver for SMSC
  ARM: shmobile: lager: support GPIO switches
  ARM: shmobile: lager: Add GPIO LEDs
  ARM: shmobile: bockw: add dummy regulators for SMSC
  ARM: shmobile: bockw: add CN9 SCIF/RCAN selection dipswitch explanation
  ARM: shmobile: kzm9g: add AS3711 PMIC platform data
  ARM: shmobile: kzm9d: resigser smsc911x platform device with id -1
  ARM: shmobile: bockw: define FPGA address and rename iomem variable
  ARM: shmobile: ape6evm: MP clock parent become EXTAL2
2013-06-11 00:33:14 -07:00
Olof Johansson 9ee73aec35 Merge branch 'renesas/pinmux-gpio' into next/boards 2013-06-11 00:32:20 -07:00
Sergei Shtylyov 2437b27c3a ARM: shmobile: Marzen: pass platform data to USB PHY device
Since we're now going to setup the USBPCTRL0 register using the USB PHY device's
platform data, we now need a way to pass those platform data from the board file
to the device which is situated in setup-r8a7779.c -- and what I'm suggesting is
r8a7779_add_usb_phy_device() that will register USB PHY platform device with the
passed platform data using platform_device_register_resndata() call; creating
this function involves deletion of 'usb_phy_device' from r8a7779_devices_dt[],
so that it will no longer be registered for the generic R8A7779 machine (where
we can't provide the platform data anyway), hence EHCI/OHCI drivers will fail
to load as well.

For the Marzen board, this new function will be called from marzen_init() to
register the USB PHY device early enough.

Note that the board and the SoC code have to be in one patch to keep the code
bisectable...

The patch has been tested on the Marzen board.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[horms+renesas@verge.net.au: manually applied]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11 16:10:48 +09:00
Sergei Shtylyov 2c8788bfd8 ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
USB EHCI, OHCI, and common PHY are the SoC devices but are wrongly defined and
registered in the Marzen board file.  Move the data and code to their proper
place in setup-r8a7779.c; while at it, we have to rename r8a7779_late_devices[]
to r8a7779_standard_devices[] -- this seems legitimate since they are registered
from r8a7779_add_standard_devices() anyway.

Note that I'm deliberately changing the USB PHY platform device's 'id' field
from (previously just omitted) 0 to -1 as the device is a single of its kind.

Note also that the board and SoC code have to be in one patch to keep the code
bisectable...

The patch has been tested on the Marzen board.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[horms+renesas@verge.net.au: manually applied]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11 16:10:40 +09:00
Kuninori Morimoto f3031ff3f2 ARM: shmobile: marzen: keep local function as static
marzen_init_late() should be static

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07 14:26:35 +09:00
Simon Horman 6e26703025 ARM: shmobile: marzen: Use INTC External IRQ pin driver for SMSC
Update the marzen board to use the INTC External IRQ pin driver for SMSC.

This code was originally posted by Magnus Damm as part of
"ARM: shmobile: INTC External IRQ pin driver on r8a7779"
but somehow omitted when I applied that patch.

Cc: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07 14:26:32 +09:00
Laurent Pinchart 5fcf4a3c3a ARM: shmobile: marzen: Use RCAR_GP_PIN macro
Replace hardcoded pin numbers with the RCAR_GP_PIN macro to make the
code match the documentation.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05 17:18:24 +09:00
Simon Horman 5f10428e4a ARM: shmobile: marzen: Use error values in usb_power_*
This patch updates the marzen board code as if USB PHY isn't enabled
they phy will have a value set by ERR_PTR() rather than be NULL.

Without this patch a NULL pointer dereference  and kernel panic
occurs on initialisation of USB on marzen.

This resolves a regression introduced in 3.10-rc1 by
b7fa5c2aec
("usb: phy: return -ENXIO when PHY layer isn't enabled").

Tested-by: Nguyen Hong Ky <nh-ky@jinso.co.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-05-22 15:43:16 +09:00
Simon Horman eb0ae72809 Second round of Renesas ARM and SH based SoC pinmux updates for v3.10
Highlights:
 
 * Compilation fixes for sh7269 and for when CONFIG_BUG is not set
 * sh-pfc Support for r8a73a4 SoC
 * Move GPIOs handling from the PFC device to separate GPIO devices on the r8a7779 SoC
 
 This pull request is based on a merge of:
 git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-pinmux-for-v3.10
 git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-soc2-for-v3.10
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRW4oIAAoJENfPZGlqN0++W6MP/2+++lzClm3iPneAhigO5UAB
 IF0/CSLYAHjxlMW4CZWquJE6t9x5MptcAi2GmBwPwRFsQWjz6jFIHSmtEavX81IU
 0k0zBf2QEHED+PhEx50V3TvDyLAf6pAWWWN/Fp5r8isLrUXAoZhY2eY6vaddFQkY
 a98NC7c8t911stOs0BDeiQ9TjsR8P1uRYIPang473NOOQ8w6vf5CPh7ihcG4026A
 R5AomkOZgNukF55gxi1BfUfaXpVsuBhRb5PfdzPXbNB3fOybaPSEc+rnFoCwe5DY
 teQbpldHFp0wHMFYOZ+mlGqToDitLyqk1D98U7KNNAKnzX74VW4ta15pkK+Pmed+
 m4a/eeJIv4y1Xfk06wwj78SvT7uW+u24iUW0mppuH/x5gGjPD9q56rA4ylguV0XF
 AeVeBiA/cMlDK2k5lw087fyORvvVX4tDY5P7X7BxLCVuZRFynoNJLkXyvE/0yI3R
 UvrxlajIEUVXtK1uMh4ULLbP4OiA2SMhqrLqG+JvibeFFWLY0mxj+IDRuv34/UqR
 iQUMkCIjOJ2Xxcs5rWr9fRHiuUL66Xy8+FE1jL/Wkb6qldmbtcBbn9le2CUucPQ7
 McXa3R8x46qMaG40b5wCxAv7W6zOcpHNl0YnwNh7ClD+BctjF2JpVLmJQZsQqyyn
 FKPpzmdXD3eIL1g3R58L
 =vwDo
 -----END PGP SIGNATURE-----

Merge tag 'renesas-pinmux2-for-v3.10' into boards-base

Second round of Renesas ARM and SH based SoC pinmux updates for v3.10

Highlights:

* Compilation fixes for sh7269 and for when CONFIG_BUG is not set
* sh-pfc Support for r8a73a4 SoC
* Move GPIOs handling from the PFC device to separate GPIO devices on the r8a7779 SoC

This pull request is based on a merge of:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-pinmux-for-v3.10
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-soc2-for-v3.10

This merge is made to supply run-time dependencies for the following
patches that will bea added on top:

ARM: shmobile: APE6EVM LAN9220 support
ARM: shmobile: APE6EVM PFC support
2013-04-03 10:49:18 +09:00
Laurent Pinchart 48b1e3e80f ARM: shmobile: marzen: Add GPIO LEDs
The board has 3 LEDs connected to GPIOs. Add a led-gpio device to
support them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-03 10:30:34 +09:00
Kuninori Morimoto 0b6794ef6e ARM: shmobile: marzen: Use gic_iid macro for ICCIAR / interrupt ID
ARM: shmobile: add gic_iid macro for ICCIAR / interrupt ID
enabled to use gic_iid macro.
This patch exchange current GIC interrupt setting
from gic_spi() to gic_iid()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[ horms+renesas@verge.net.au: Split irq.h portion into a separate patch ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18 21:27:03 +09:00
Laurent Pinchart ee097e6617 ARM: shmobile: marzen: Register pinctrl mappings for INTC
Replace the GPIO-based INTC pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-03-15 13:34:13 +01:00
Laurent Pinchart f423df8e49 ARM: shmobile: marzen: Register pinctrl mappings for LBSC
Replace the GPIO-based LBSC pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-03-15 13:34:12 +01:00
Laurent Pinchart a00f6e57aa ARM: shmobile: marzen: Register pinctrl mappings for USB
Replace the GPIO-based USB pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-03-15 13:34:12 +01:00
Laurent Pinchart a321747186 ARM: shmobile: marzen: Register pinctrl mappings for HSPI
Replace the GPIO-based HSPI pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-03-15 13:34:12 +01:00
Laurent Pinchart e9cd49faef ARM: shmobile: marzen: Register pinctrl mappings for SCIF
Replace the GPIO-based SCIF pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-03-15 13:34:12 +01:00
Laurent Pinchart 4a655ecd30 ARM: shmobile: marzen: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-03-15 13:34:12 +01:00
Simon Horman 44e9ac4575 ARM: shmobile: marzen: Include mmc/host.h
mmc/host.h provides MMC_CAP_SD_HIGHSPEED which is used in board-marzen.c

This resolves a build problem observed when compiling with
"mmc: tmio: remove unused and deprecated symbols" applied.

Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-08 16:29:23 +01:00
Olof Johansson f8060f5446 Initial irqchip init infrastructure and GIC and VIC clean-ups
This creates irqchip initialization infrastructure from Thomas
 Petazzoni. The VIC and GIC irqchip code is moved to drivers/irqchips
 and adapted to use the new infrastructure. All DT enabled platforms
 using GIC and VIC are converted over to use the new irqchip_init.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJQ8ZobAAoJEMhvYp4jgsXiihIH/2VvxmSHZb0e3jN6AR0B42b7
 9EwX0IE0B23t91hNTwdzzmTJQYA7pMmWkgHNfd3vIeqSepJAmrVv/gp4iM9CtPwE
 KNh+kDWOK2ZsOH4Vb0lYRJHN8WQOIQHuCUr9+MdYLNOgf/pPL6G/Y9kv9A1e7fTC
 W+tFRjC5N1ilZMGyowX12L1wnwDk6kHzed6YV6bskC17cZ9/pg8PhSVbM4A/3kAv
 NXYKqbXJb+eCsWGXg/knZXOL6V9gBwvVYoe4O9X3nQ0226AWB9caad8l8tchAjRB
 fmrYF1tbkpOWPnLxhvQy5b5MJichJgTMJHh7RgiEcc/3f63kOljjlx4QKiqHvT0=
 =q7gm
 -----END PGP SIGNATURE-----

Merge tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux into next/cleanup

From Rob Herring:

Initial irqchip init infrastructure and GIC and VIC clean-ups

This creates irqchip initialization infrastructure from Thomas
Petazzoni. The VIC and GIC irqchip code is moved to drivers/irqchips
and adapted to use the new infrastructure. All DT enabled platforms
using GIC and VIC are converted over to use the new irqchip_init.

* tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux:
  irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.h
  ARM: picoxcell: use common irqchip_init function
  ARM: spear: use common irqchip_init function
  irqchip: Move ARM VIC to drivers/irqchip
  ARM: samsung: remove unused tick.h
  ARM: remove unneeded vic.h includes
  ARM: remove mach .handle_irq for VIC users
  ARM: VIC: set handle_arch_irq in VIC initialization
  ARM: VIC: shrink down vic.h
  irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.h
  ARM: use common irqchip_init for GIC init
  irqchip: Move ARM GIC to drivers/irqchip
  ARM: remove mach .handle_irq for GIC users
  ARM: GIC: set handle_arch_irq in GIC initialization
  ARM: GIC: remove direct use of gic_raise_softirq
  ARM: GIC: remove assembly ifdefs from gic.h
  ARM: mach-ux500: use SGI0 to wake up the other core
  arm: add set_handle_irq() to register the parent IRQ controller handler function
  irqchip: add basic infrastructure
  irqchip: add to the directories part of the IRQ subsystem in MAINTAINERS

Fixed up massive merge conflicts with the timer cleanup due to adjacent changes:

Signed-off-by: Olof Johansson <olof@lixom.net>

Conflicts:
	arch/arm/mach-bcm/board_bcm.c
	arch/arm/mach-cns3xxx/cns3420vb.c
	arch/arm/mach-ep93xx/adssphere.c
	arch/arm/mach-ep93xx/edb93xx.c
	arch/arm/mach-ep93xx/gesbc9312.c
	arch/arm/mach-ep93xx/micro9.c
	arch/arm/mach-ep93xx/simone.c
	arch/arm/mach-ep93xx/snappercl15.c
	arch/arm/mach-ep93xx/ts72xx.c
	arch/arm/mach-ep93xx/vision_ep9307.c
	arch/arm/mach-highbank/highbank.c
	arch/arm/mach-imx/mach-imx6q.c
	arch/arm/mach-msm/board-dt-8960.c
	arch/arm/mach-netx/nxdb500.c
	arch/arm/mach-netx/nxdkn.c
	arch/arm/mach-netx/nxeb500hmi.c
	arch/arm/mach-nomadik/board-nhk8815.c
	arch/arm/mach-picoxcell/common.c
	arch/arm/mach-realview/realview_eb.c
	arch/arm/mach-realview/realview_pb1176.c
	arch/arm/mach-realview/realview_pb11mp.c
	arch/arm/mach-realview/realview_pba8.c
	arch/arm/mach-realview/realview_pbx.c
	arch/arm/mach-socfpga/socfpga.c
	arch/arm/mach-spear13xx/spear1310.c
	arch/arm/mach-spear13xx/spear1340.c
	arch/arm/mach-spear13xx/spear13xx.c
	arch/arm/mach-spear3xx/spear300.c
	arch/arm/mach-spear3xx/spear310.c
	arch/arm/mach-spear3xx/spear320.c
	arch/arm/mach-spear3xx/spear3xx.c
	arch/arm/mach-spear6xx/spear6xx.c
	arch/arm/mach-tegra/board-dt-tegra20.c
	arch/arm/mach-tegra/board-dt-tegra30.c
	arch/arm/mach-u300/core.c
	arch/arm/mach-ux500/board-mop500.c
	arch/arm/mach-ux500/cpu-db8500.c
	arch/arm/mach-versatile/versatile_ab.c
	arch/arm/mach-versatile/versatile_dt.c
	arch/arm/mach-versatile/versatile_pb.c
	arch/arm/mach-vexpress/v2m.c
	include/asm-generic/vmlinux.lds.h
2013-01-14 19:55:03 -08:00
Rob Herring 1d5cc604f4 ARM: remove mach .handle_irq for GIC users
Now that the GIC initialization sets up the handle_arch_irq pointer, we
can remove it for all machines and make it static.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Anton Vorontsov <avorontsov@mvista.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: David Brown <davidb@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-01-12 10:47:20 -06:00
Stephen Warren 6bb27d7349 ARM: delete struct sys_timer
Now that the only field in struct sys_timer is .init, delete the struct,
and replace the machine descriptor .timer field with the initialization
function itself.

This will enable moving timer drivers into drivers/clocksource without
having to place a public prototype of each struct sys_timer object into
include/linux; the intent is to create a single of_clocksource_init()
function that determines which timer driver to initialize by scanning
the device dtree, much like the proposed irqchip_init() at:
http://www.spinics.net/lists/arm-kernel/msg203686.html

Includes mach-omap2 fixes from Igor Grinberg.

Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-24 09:36:38 -07:00
Kuninori Morimoto ac7c4ea037 ARM: shmobile: marzen: add USB OHCI driver support
This patch supports CN21/CN22 USB 1.x (port 0/1/2),
and enable input event on defconfig

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-11-08 17:52:04 +09:00
Kuninori Morimoto 94e1f7fbe0 ARM: shmobile: marzen: add USB EHCI driver support
This patch supports CN21/CN22 USB 2.0 (port 0/1/2),
and enable USB momery on defconfig

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-11-08 17:52:03 +09:00
Kuninori Morimoto b5ce635d45 ARM: shmobile: marzen: add USB phy support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-11-08 17:52:03 +09:00
Kuninori Morimoto b82573e18b ARM: shmobile: marzen: add HSPI support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-10-30 15:25:51 +08:00
Linus Torvalds 9cd11c0c47 ARM: soc: multiplatform enablement
This is a pretty significant branch. It's the introduction of the
 first multiplatform support on ARM, and with this (and the later
 branch) merged, it is now possible to build one kernel that contains
 support for highbank, vexpress, mvebu, socfpga, and picoxcell. More
 platforms will be convered over in the next few releases.
 
 Two critical last things had to be done for this to be practical and
 possible:
 * Today each platform has its own include directory under
   mach-<mach>/include/mach/*, and traditionally that is where a lot of
   driver/platform shared definitions have gone, such as platform data
   structures. They now need to move out to a common location instead,
   and this branch moves a large number of those out to
   include/linux/platform_data.
 * Each platform used to list the device trees to compile for its
   boards in mach-<mach>/Makefile.boot.
 
 Both of the above changes will mean that there are some merge
 conflicts to come (and some to resolve here). It's a one-time move and
 once it settles in, we should be good for quite a while. Sorry for the
 overhead.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO7aAAoJEIwa5zzehBx3bUIP/02U8PhkHJJrrowyIsWRBOql
 7LPJ53PRRgrpBdmEGzFD3TO3zaNyrjQRbYgNDvzHMO6NAMNvdRFouuWYjO11/tuB
 i32zssXCC+eUOEgbAo/U/lYq+UOvqw9gv6mU+3+i3OcGEhdKOaoT/DSLPQC4hoDm
 222TeLfFB3HJXu5n720dEQ9V3fO6TS1+bbh8TU3cjHqzceXsOrffZqOA5CQxUcRr
 KWwOjA0nALDwWcqgv45GJNwY3GTyAQ/hPMQavnuWK0voJ+qUYk5HftKocAK7C+py
 0T0OFOAHTwtyhvzJBxLC84M6Ox465BYXyeNjIB+2nG/Um9+mDoP0dnWpGy4c7DMU
 P5hyqbeLGeqjUXQuYtRmgMMc3UeHKoUGAfXW9eMsjLa6/M4NLGv//7E7LbZPpgMZ
 obkjwuesmcaYn/FRyj/yFmC35YlF4oCLziVzEtURZw3eKHHSUlhkTDSMNnkcZ0kZ
 Vv7kFxnD2Y46ixiwSJv30ErQnVkgI3MdqDlDxkE8r5+phYuK4gCrNaJtiwRh/oNw
 cFhpPxKuA0sJ9b6YRTzjC45eT/XZomEEr/uifCFeRNaCquyjYP00Mm8F0flSqwx9
 zi+emzPAwNmk1bvxMUM/idGnaj0V4p+BAYUAvkbSoqU1p1flzyhU88fGTSIyKOt6
 K5TCDS2v5hrVykK9TDwl
 =Tc6y
 -----END PGP SIGNATURE-----

Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc multiplatform enablement from Olof Johansson:
 "This is a pretty significant branch.  It's the introduction of the
  first multiplatform support on ARM, and with this (and the later
  branch) merged, it is now possible to build one kernel that contains
  support for highbank, vexpress, mvebu, socfpga, and picoxcell.  More
  platforms will be convered over in the next few releases.

  Two critical last things had to be done for this to be practical and
  possible:
   * Today each platform has its own include directory under
     mach-<mach>/include/mach/*, and traditionally that is where a lot
     of driver/platform shared definitions have gone, such as platform
     data structures.  They now need to move out to a common location
     instead, and this branch moves a large number of those out to
     include/linux/platform_data.
   * Each platform used to list the device trees to compile for its
     boards in mach-<mach>/Makefile.boot.

  Both of the above changes will mean that there are some merge
  conflicts to come (and some to resolve here).  It's a one-time move
  and once it settles in, we should be good for quite a while.  Sorry
  for the overhead."

Fix conflicts as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits)
  ARM: add v7 multi-platform defconfig
  ARM: msm: Move core.h contents into common.h
  ARM: highbank: call highbank_pm_init from .init_machine
  ARM: dtb: move all dtb targets to common Makefile
  ARM: spear: move platform_data definitions
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: vexpress: convert to multi-platform
  ARM: initial multiplatform support
  ARM: mvebu: move armada-370-xp.h in mach dir
  ARM: vexpress: remove dependency on mach/* headers
  ARM: picoxcell: remove dependency on mach/* headers
  ARM: move all dtb targets out of Makefile.boot
  ARM: picoxcell: move debug macros to include/debug
  ARM: socfpga: move debug macros to include/debug
  ARM: mvebu: move debug macros to include/debug
  ARM: vexpress: move debug macros to include/debug
  ARM: highbank: move debug macros to include/debug
  ARM: move debug macros to common location
  ARM: make mach/gpio.h headers optional
  ...
2012-10-01 19:11:38 -07:00
Linus Torvalds 95360fd636 ARM: soc: board specific updates
Misc board updates:
 - Greg added a handful of boards to KS8695 (since he has stepped up to
   maintain it).
 - Qualcomm has added DT-only board support for a couple of their newer SoCs.
 - misc other updates for Samsung and Freescale boards.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO5+AAoJEIwa5zzehBx34OAP/00W1eziYwliv08FeQ4M6Rum
 OSFI1qBXubCZwyzczyM7r6ArnhdmJz0e2p1WEbS1hIQRjYR+pTwzBOSRsU460WsM
 Hy3CYV7SQb551rEC3yPoVst24TgBoDJah3UORfEmi0hIMoWDPqEV/erpI2+sSLzz
 KbQpI6C8V4MvLELSM1YxljorT50cRmoD+J1bdO6jI68bAwIMWBVPhezqg4/k8Gkh
 TqfP2zoc/O9jlc6zgMJc1T+M/CLyFYJeV63dNQ4ER54NFdUs+NdHItNHjJlGAOSQ
 2e4NDUKKklxLUno+kyTiTkWkFEgxu9W8XLZi6CLNGCO4gsiM8ljVAdW0xuWeXFkX
 1OucFrBYEMonKEEWURvtNpYyEu9/Wz5WCInmqM5u92w/+GIzBYzr6sbircCOAXBv
 UlVmvIltrhpTPkAuLkG/hL6KVV2UiNcr2hgALlhhnQ68hTzGGZrvUWuNCB6zjrHF
 okl1bmo6kjtj9A09YmXFEPL8l8q9hRWirWTnyLWAjoeDY1juy+SdVx+8CJy/2ua5
 QllqN3SGOX2WVMuBo6C24lwRa21cQ7Ax8GCavuKKB0eyIrWer1pVhO6xZCwii1gG
 iZgpaOZpeOe4lms1oD2RqjV8GlW6DQAaLINlqHzj3G/BcRTMN4S/QD2S47yMgCPc
 Kf1zsyukeBhfVWTUULEE
 =fe76
 -----END PGP SIGNATURE-----

Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc board specific updates from Olof Johansson:
 "Misc board updates:
   - Greg added a handful of boards to KS8695 (since he has stepped up
     to maintain it).
   - Qualcomm has added DT-only board support for a couple of their
     newer SoCs.
   - misc other updates for Samsung and Freescale boards."

Fix up trivial conflict in arch/arm/mach-shmobile/board-armadillo800eva.c
due to gpio device data being added next to hdmi device data that got moved.

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: msm: Allow 8960 and 8660 to compile together
  ARM: msm: Allow msm_iomap-8x60 and msm_iomap-8960 to coexist
  ARM: EXYNOS: Add generic PWM lookup support for SMDKV310
  ARM: EXYNOS: Add generic PWM lookup support for SMDK4X12
  ARM: EXYNOS: Use generic pwm driver in Origen board
  ARM: shmobile: armadillo800eva: Add support RTC
  ARM: ks8695: add board support for the OpenGear boards based on the KS8695
  ARM: ks8695: add board support for the SnapGear boards based on the KS8695
  ARM: dts: Add heartbeat gpio-leds support to Origen
  ARM: dts: Use active low flag for gpio-keys on Origen
  ARM: shmobile: marzen: enable thermal sensor
  ARM: shmobile: marzen: fixup regulator id for smsc911x
  ARM: shmobile: marzen: add SDHI0 support
  ARM: mmp: enable debug uart port in defconfig
  ARM: mmp: implement DEBUG_LL port choice
  ARM: S3C64XX: Register audio platform devices for Bells on Cragganmore
  ARM: S3C64XX: Update configuration for WM5102 module on Cragganmore
  ARM: mx27pdk: Add audio support
  ARM: ttc_dkb: add nand support
2012-10-01 18:48:30 -07:00
Olof Johansson 25468fe89f Merge branch 'multiplatform/smp_ops' into next/multiplatform
* multiplatform/smp_ops:
  ARM: consolidate pen_release instead of having per platform definitions
  ARM: smp: Make SMP operations mandatory
  ARM: SoC: convert spear13xx to SMP operations
  ARM: SoC: convert imx6q to SMP operations
  ARM: SoC: convert highbank to SMP operations
  ARM: SoC: convert shmobile SMP to SMP operations
  ARM: SoC: convert ux500 to SMP operations
  ARM: SoC: convert MSM to SMP operations
  ARM: SoC: convert Exynos4 to SMP operations
  ARM: SoC: convert Tegra to SMP operations
  ARM: SoC: convert OMAP4 to SMP operations
  ARM: SoC: convert VExpress/RealView to SMP operations
  ARM: SoC: add per-platform SMP operations

Conflicts due to file moves or removals in:
	arch/arm/mach-msm/board-msm8960.c
	arch/arm/mach-msm/board-msm8x60.c
	arch/arm/mach-tegra/board-harmony.c
	arch/arm/mach-tegra/board-trimslice.c

Conflicts due to board file cleanup:
	arch/arm/mach-tegra/board-paz00.c

Conflicts due to cpu hotplug addition:
	arch/arm/mach-tegra/hotplug.c

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-22 00:16:04 -07:00
Marc Zyngier a62580e580 ARM: SoC: convert shmobile SMP to SMP operations
Convert shmobile SMP platforms to use struct smp_operations to provide
their SMP and CPU hotplug operations.

Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-14 11:14:58 +02:00
Kuninori Morimoto eb8ca943ba ARM: shmobile: marzen: enable thermal sensor
Marzen board can measure its thermal by this patch.
	cat /sys/class/thermal/thermal_zoneX/temp

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-09-06 10:24:17 +09:00