Now that a generic drm_connector_register_all() helper exists we may safely
substitute it for the driver-specific implementation of connectors plugging
in sysfs.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: linux-renesas-soc@vger.kernel.org
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461068693-11260-4-git-send-email-abrodkin@synopsys.com
Current name is a bit misleading because what that helper function
really does it calls drm_connector_unregister() for all connectors.
This all has nothing to do with hotplugging so let's name things
properly.
And while at it remove potentially dangerous locking around
drm_connector_unregister() in rcar_du_remove() as mentioned
in kerneldoc for drm_connector_unregister_all().
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: linux-renesas-soc@vger.kernel.org
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1458722577-20283-2-git-send-email-abrodkin@synopsys.com
Print a message when the HDMI I2C slave encoder can't be found to help
debugging probe deferral issues.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The LVDS encoder differs slightly in Gen3 SoCs in its PLL configuration.
Add support for the Gen3 LVDS PLL parameters and startup procedure.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Document the R8A7795-specific DT bindings and support them in the
driver. The HDMI and LVDS outputs are currently not supported.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The ODDF signal, output by default on the ODDF pin, isn't used on any
board supported in the kernel. As the Gen3 Salvator-X board uses the
ODDF pin as a DISP signal, hardcode that configuration in the driver.
Use of the ODDF signal will be implemented later through proper DT-based
configuration of the DU pins.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The DE signal is currently configured to be identical to the DISP
signal and is used for the same purpose. To make it clearer that the
DISP pin outputs the DISP signal, select it explicitly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The Gen3 R8A7795 DU has 4 CRTCs, support them all.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
LVDS support depends on DRM_RCAR_DU which already depends on OF. Drop
the explicit dependency.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The R8A7795 SoC is ARM64-based and include a DU. Enable driver
compilation on ARM64.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Use %tu instead of %u to print difference between pointers.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
On R-Car Gen3 SoCs the DU lost its ability to access memory directly and
needs to work in conjunction with the VSP to do so. This commit handles
the VSP internally to hide it from the user.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The plane allocator is specific to DU planes and won't be used for
VSP-based planes, move it with the rest of the DU planes code where it
belongs.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Plane sources are configured by the VSPS bit in the PnDDCR4 register.
Although the datasheet states that the bit is updated during vertical
blanking, it seems that updates only occur when the DU group is held in
reset through the DSYSR.DRES bit. Restart the group if the source
changes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Configure the plane source at plane setup time to source frames from
memory or from the VSP1.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The R8A7790 DU can source frames directly from the VSP1 devices VSPD0
and VSPD1. VSPD0 feeds DU0/1 plane 0, and VSPD1 feeds either DU2 plane 0
or DU0/1 plane 1.
Allocate the correct fixed plane when sourcing frames from VSPD0 or
VSPD1, and allocate planes in reverse index order otherwise to ensure
maximum availability of planes 0 and 1.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Rename plane setup functions using more explicit names, and use local
variables to store intermediate values to increase readability. This
also prepares for VSP compositor support.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
There's no need for a read-modify-write pattern, all register bits can
be set explicitly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
A disabled CRTC can't display planes, the driver shouldn't try to
configure it when updating planes. The DRM core will store the plane
state for us, and the plane will be configured appropriately the next
time the CRTC is enabled.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The atomic framework guarantees that the CRTC enable and disable
functions will only be called when needed, there's no need to duplicate
the CRTC state check. By replacing the local CRTC enabled state check at
resume time with the CRTC active state we can remove the local CRTC
enabled state altogether.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The drm driver .load() operation is prone to race conditions as it
initializes the driver after registering the device nodes. Its usage is
deprecated, inline it in the probe function and call drm_dev_alloc() and
drm_dev_register() explicitly.
For consistency inline the .unload() handler in the remove function as
well.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
First drm-misc pull req for 4.6. Big one is the drm_event cleanup, which
is also prep work for adding android fence support to kms (Gustavo is
planning to do that). Otherwise random small bits all over.
* tag 'topic/drm-misc-2016-02-08' of git://anongit.freedesktop.org/drm-intel: (33 commits)
gma500: clean up an excessive and confusing helper
drm/gma500: remove helper function
drm/vmwgfx: Nuke preclose hook
drm/vc4: Nuke preclose hook
drm/tilcdc: Nuke preclose hook
drm/tegra: Stop cancelling page flip events
drm/shmob: Nuke preclose hook
drm/rcar: Nuke preclose hook
drm/omap: Nuke close hooks
drm/msm: Nuke preclose hooks
drm/imx: Unconfuse preclose logic
drm/exynos: Remove event cancelling from postclose
drm/atmel: Nuke preclose
drm/i915: Nuke intel_modeset_preclose
drm: Nuke vblank event file cleanup code
drm: Clean up pending events in the core
drm/vblank: Use drm_event_reserve_init
drm/vmwgfx: fix a NULL dereference
drm/crtc-helper: Add caveat to disable_unused_functions doc
drm/gma500: Remove empty preclose hook
...
Again since the drm core takes care of event unlinking/disarming this
is now just needless code.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453756616-28942-10-git-send-email-daniel.vetter@ffwll.ch
Move the generic implementation to <linux/dma-mapping.h> now that all
architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now
that everyone supports them.
[valentinrothberg@gmail.com: remove leftovers in Kconfig]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Helge Deller <deller@gmx.de>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Done with coccinelle for the most part. However, it thinks '...' is
part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder
in its place and got rid of it with sed afterwards.
@@
identifier dev, encoder, funcs;
@@
int drm_encoder_init(struct drm_device *dev,
struct drm_encoder *encoder,
const struct drm_encoder_funcs *funcs,
int encoder_type
+ ,const char *name, int DOTDOTDOT
)
{ ... }
@@
identifier dev, encoder, funcs;
@@
int drm_encoder_init(struct drm_device *dev,
struct drm_encoder *encoder,
const struct drm_encoder_funcs *funcs,
int encoder_type
+ ,const char *name, int DOTDOTDOT
);
@@
expression E1, E2, E3, E4;
@@
drm_encoder_init(E1, E2, E3, E4
+ ,NULL
)
v2: Add ', or NULL...' to @name kernel doc (Jani)
Annotate the function with __printf() attribute (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449670818-2966-1-git-send-email-ville.syrjala@linux.intel.com
Done with coccinelle for the most part. It choked on
msm/mdp/mdp5/mdp5_plane.c like so:
"BAD:!!!!! enum drm_plane_type type;"
No idea how to deal with that, so I just fixed that up
by hand.
Also it thinks '...' is part of the semantic patch, so I put an
'int DOTDOTDOT' placeholder in its place and got rid of it with
sed afterwards.
I didn't convert drm_plane_init() since passing the varargs through
would mean either cpp macros or va_list, and I figured we don't
care about these legacy functions enough to warrant the extra pain.
@@
typedef uint32_t;
identifier dev, plane, possible_crtcs, funcs, formats, format_count, type;
@@
int drm_universal_plane_init(struct drm_device *dev,
struct drm_plane *plane,
unsigned long possible_crtcs,
const struct drm_plane_funcs *funcs,
const uint32_t *formats,
unsigned int format_count,
enum drm_plane_type type
+ ,const char *name, int DOTDOTDOT
)
{ ... }
@@
identifier dev, plane, possible_crtcs, funcs, formats, format_count, type;
@@
int drm_universal_plane_init(struct drm_device *dev,
struct drm_plane *plane,
unsigned long possible_crtcs,
const struct drm_plane_funcs *funcs,
const uint32_t *formats,
unsigned int format_count,
enum drm_plane_type type
+ ,const char *name, int DOTDOTDOT
);
@@
expression E1, E2, E3, E4, E5, E6, E7;
@@
drm_universal_plane_init(E1, E2, E3, E4, E5, E6, E7
+ ,NULL
)
v2: Split crtc and plane changes apart
Pass NUL for no-name instead of ""
Leave drm_plane_init() alone
v3: Add ', or NULL...' to @name kernel doc (Jani)
Annotate the function with __printf() attribute (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449670795-2853-1-git-send-email-ville.syrjala@linux.intel.com
Done with coccinelle for the most part. However, it thinks '...' is
part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder
in its place and got rid of it with sed afterwards.
I didn't convert drm_crtc_init() since passing the varargs through
would mean either cpp macros or va_list, and I figured we don't
care about these legacy functions enough to warrant the extra pain.
@@
identifier dev, crtc, primary, cursor, funcs;
@@
int drm_crtc_init_with_planes(struct drm_device *dev,
struct drm_crtc *crtc,
struct drm_plane *primary, struct drm_plane *cursor,
const struct drm_crtc_funcs *funcs
+ ,const char *name, int DOTDOTDOT
)
{ ... }
@@
identifier dev, crtc, primary, cursor, funcs;
@@
int drm_crtc_init_with_planes(struct drm_device *dev,
struct drm_crtc *crtc,
struct drm_plane *primary, struct drm_plane *cursor,
const struct drm_crtc_funcs *funcs
+ ,const char *name, int DOTDOTDOT
);
@@
expression E1, E2, E3, E4, E5;
@@
drm_crtc_init_with_planes(E1, E2, E3, E4, E5
+ ,NULL
)
v2: Split crtc and plane changes apart
Pass NULL for no-name instead of ""
Leave drm_crtc_init() alone
v3: Add ', or NULL...' to @name kernel doc (Jani)
Annotate the function with __printf() attribute (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449670771-2751-1-git-send-email-ville.syrjala@linux.intel.com
Drivers shouldn't clobber the passed in addfb ioctl parameters.
i915 was doing just that. To prevent it from happening again,
pass the struct around as const, starting all the way from
internal_framebuffer_create().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The R8A7794 DU has a fixed output routing configuration with one RGB
output per CRTC and thus lacks the RGB output routing register field.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The R8A7793 DU is identical to the R8A7791 and thus only requires a new
DT compatible string.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The plane reset handler frees the plane state and allocates a new
default state, but when doing so attempt to free the plane state using
the base plane state pointer instead of casting it to the
driver-specific state object that has been allocated. Fix it by using
the rcar_du_plane_atomic_destroy_state() function to destroy the plane
state instead of duplicating the code.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
The DPAD RGB output can be driven by both DU0 and DU1 on R8A7791. Mark
the DU0 connection as possible.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The driver requires OF support, add a dependency in Kconfig and remove
the platform_device_id table that isn't used anymore.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Since commit a483dcbfa2 ("ARM: shmobile: lager: Remove legacy
board support"), R-Car Gen2 SoCs are only supported in generic DT-only
ARM multi-platform builds. The driver doesn't need to match platform
devices by name anymore, hence remove the corresponding
platform_device_id entry.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
drm_vblank_count() returns the software counter. We should not pretend
it's the hw counter since we use the hw counter to figuere out what the
software counter value should be. So instead provide a new function
drm_vblank_no_hw_counter() for drivers that don't have a real hw
counter. The new function simply returns 0, which is about the only
thing it can do.
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
[danvet: s/int pipe/unsigned int pipe/ to follow Thierry's interface
change.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This continues the pattern started in commit cc1ef118fc ("drm/irq:
Make pipe unsigned and name consistent"). This is applied to the public
APIs and driver callbacks, so pretty much all drivers need to be updated
to match the new prototypes.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Jianwei Wang <jianwei.wang.chn@gmail.com>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With drivers supporting runtime pm it's generally not a good idea to
touch the hardware when it's off. Add an option to the commit_planes
helper to support this case.
Note that the helpers already add all planes on a crtc when a modeset
happens, hence plane updates will not be lost if drivers set this to
true.
v2: Check for NULL state->crtc before chasing the pointer. Also check
both old and new crtc if there's a switch. Finally just outright
disallow switching crtcs for a plane if the plane is in active use, on
most hardware that doesn't make sense.
v3: Since commit_planes(active_only = true) is for enabling things
only after all the crtc are on we should only look at the new crtc to
decide whether to call the plane hooks - if the current CRTC isn't on
then skip. If the old crtc (when moving a plane) went down then the
plane should have been disabled as part of the pipe shutdown work
already. For which there's currently no helper really unfortunately.
Also move the check for wether a plane gets a new CRTC assigned while
still in active use out of this patch.
v4: Rebase over exynos changes.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
In intel it's useful to keep track of some state changes with old
crtc state vs new state, for example to disable initial planes or
when a modeset's prevented during fastboot.
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
[danvet: squash in fixup for exynos provided by Maarten.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ensure that the duplicate and destroy plane state operations will always
be in sync with the DRM core implementation of the plane state by using
the __drm_atomic_helper_plane_duplicate_state() and
__drm_atomic_helper_plane_destroy_state() functions designed especially
for this purpose.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
When the .atomic_commit() handler fails, clean up planes previoulsy
prepared by drm_atomic_helper_prepare_planes() with a call to
drm_atomic_helper_cleanup_planes().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The function returns 1 on success, and either 0 or a negative error code
on failure. As the 0 and negative values don't need to be differentiated
by the caller, convert it to the usual scheme of returning 0 on success
and a negative error code on failure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
A failure to initialize an encoder currently prints an error message in
the kernel log without mentioning which encoder failed to initialize. To
help debugging initialization issues print the encoder DT node name.
This requires moving the error message to the rcar_du_encoders_init_one
function and refactoring it slightly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Commit 917de18037 ("drm: rcar-du: Implement universal plane support")
made the number of planes per group dynamic, but didn't update all loops
over the planes array, resulting in out-of-bound accesses on DU
instances that have an odd number of CRTCs (such as the R8A7790). Fix
it.
Fixes: 917de18037 ("drm: rcar-du: Implement universal plane support")
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The DSnPR plane configuration registers are updated on vblank, and no
vblank will occur once the CRTC is stopped. We thus can't only disable
planes right before starting the CRTC as it would start scanning out
immediately from old frame buffers until the next vblank.
Fix the problem by disabling all planes when stopping the CRTC and wait
for the change to take effect. This increases the CRTC stop delay,
especially when multiple CRTCs are stopped in one operation as we now
wait for one vblank per CRTC. Whether this can be improved needs to be
researched.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
If we have more than one CRTCs in a group pre-associate planes 0-3 with
CRTC 0 and planes 4-7 with CRTC 1 to minimize flicker occurring when the
association is changed. The pre-association could be controlled by a
module parameter if needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The number of CRTCs in a group is only used to implement plane
initialization for now, but is also needed to implement pre-association
of planes to CRTCs. Store it in the group structure instead of computing
it on demand.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Hardware planes are driven by the timing generator of the CRTC they are
associated to. Changing the association requires restarting the CRTC
group that the plane belongs to, resulting in flicker on the other CRTC.
To avoid flicker as much as possible, try to allocate planes first from
the free planes already associated with the target CRTC. If allocation
fails then fall back to allocation from all free planes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Changing the plane to CRTC associations requires restarting the CRTC
group, creating visible flicker. Mitigate the issue by changing plane
association only when a plane becomes enabled, not when it get disabled.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Plane allocation is a complex process, add debugging statements to help
finding out what could might wrong.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
All other cast functions are named without using "du", make the plane
state cast consistent with them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The rcar_du_planes structure contains a single field and is only
instantiated in the rcar_du_group structure. Embed it directly and
remove the rcar_du_planes structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The plane property objects are instantiated once per CRTC group, while
they should be instantiated once globally for the device. Fix this and
move them to the rcar_du_device structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Convert all drm callers that use of_graph_get_next_endpoint to loop over
of-graph endpoints to the newly introduced for_each_endpoint_of_node
helper macro.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=la2O
-----END PGP SIGNATURE-----
Merge tag 'of-graph-drm-2015-04-08' of git://git.pengutronix.de/git/pza/linux into drm-next
drm: Use of-graph helpers to loop over endpoints
Convert all drm callers that use of_graph_get_next_endpoint to loop over
of-graph endpoints to the newly introduced for_each_endpoint_of_node
helper macro.
* tag 'of-graph-drm-2015-04-08' of git://git.pengutronix.de/git/pza/linux:
drm/rockchip: use for_each_endpoint_of_node macro, drop endpoint reference on break
drm/rcar-du: use for_each_endpoint_of_node macro
drm/imx: use for_each_endpoint_of_node macro in imx_drm_encoder_get_mux_id
drm: use for_each_endpoint_of_node macro in drm_of_find_possible_crtcs
of: Explicitly include linux/types.h in of_graph.h
dt-bindings: brcm: rationalize Broadcom documentation naming
of/unittest: replace 'selftest' with 'unittest'
Documentation: rename of_selftest.txt to of_unittest.txt
Documentation: update the of_selftest.txt
dt: OF_UNITTEST make dependency broken
MAINTAINERS: Pantelis Antoniou device tree overlay maintainer
of: Add of_graph_get_port_by_id function
of: Add for_each_endpoint_of_node helper macro
of: Decrement refcount of previous endpoint in of_graph_get_next_endpoint
Using the for_each_... macro should make the code a bit shorter and
easier to read.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Set the DRIVER_ATOMIC flag to enable usage of the atomic updates API
with the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The field is set by drm_send_vblank_event(), there's no need to
preinitialize it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Plane state duplication takes a reference to the framebuffer stored in
the state, but state destroy doesn't release it. This causes a reference
leak. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The plane allocator has been inherently racy since the beginning of the
transition to atomic updates, as the allocator lock is released between
free plane check (at .atomic_check() time) and the reservation (at
.atomic_update() time).
To fix it, create a new allocator solely based on the atomic plane
states without keeping any external state and perform allocation in the
.atomic_check() handler. The core idea is to replace the free planes
bitmask with a collective knowledge based on the allocated hardware
plane(s) for each KMS plane. The allocator then loops over all plane
states to compute the free planes bitmask, allocates hardware planes
based on that bitmask, and stores the result back in the plane states.
For this to work we need to access the current state of planes not
touched by the atomic update. To ensure that it won't be modified, we
need to lock all planes using drm_atomic_get_plane_state(). This
effectively serializes atomic updates from .atomic_check() up to
completion, either when swapping the states if the check step has
succeeded, or when freeing the states if the check step has failed.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Only the planes to CRTCs association control register DPTSR needs to be
protected by custom locking, don't hold the mutex around the whole code.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
As the DRM core will commit plane states when performing atomic updates,
those don't need to be committed manually when the CRTC is started except
in the system resume code path.
However, the atomic plane commit step is currently performed between
mode set disable and mode set enable to mimick the legacy mode setting
operations order. This causes the device clocks to be disabled after
applying plane settings and reenabled when enabling the CRTC,
potentially losing hardware in between.
Reorder the operations to enable the CRTC first and only then apply
plane settings, removing the need to manage clocks in the atomic begin
and flush handlers. We can then move the plane state commit code out of
the CRTC start handler to the system resume handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The format stored in the rcar_du_plane structure is part of the plane
state. Move it to the rcar_du_plane_state structure and precompute it in
the .atomic_check() handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The rcar_du_crtc plane field is only used to check for an error that
can't occur. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The crtc and enabled fields duplicates information stored in the plane
state. Use the plane state instead and remove the fields.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Now that the plane setup code isn't called outside of the plane
implementation, it can be simplified by merging the
rcar_du_plane_compute_base() and rcar_du_plane_update_base() functions.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Allow setting up plane properties atomically using the plane
set_property atomic helper. The properties are now stored in the plane
state (requiring subclassing it) and applied when updating the planes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The atomic page flip helper implements the page flip operation using
asynchronous commits.
As the legacy page flip was the last CRTC operation that needed direct
access to plane setup, the plane setup functions can now become private
to the plane implementation.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Implement a custom .atomic_commit() handler that supports asynchronous
commits using a work queue. This can be used for userspace-driven
asynchronous commits, as well as for an atomic page flip implementation.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The encoder .mode_fixup() operation is legacy, atomic updates uses the
new .atomic_check() operation. Convert the encoders drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The atomic connector DPMS helper implements the connector DPMS operation
using atomic commit, removing the need for DPMS helper operations on
CRTCs and encoders.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
This removes the legacy mode config code. The CRTC and encoder prepare
and commit operations are not used anymore, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
This removes the legacy plane update code. Wire up the default atomic
check and atomic commit mode config helpers as needed by the plane
update atomic helpers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
When using atomic updates the CRTC .enable() and .disable() helper
operations are preferred over the (then legacy) .prepare() and .commit()
operations. Implement .enable() and rework .disable() to not depend on
DPMS, easing DPMS removal later on.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
When using atomic updates the encoder .enable() and .disable() helper
operations are preferred over the (then legacy) .prepare() and .commit()
operations. Implement .enable() and .disable() and rework .prepare(),
.commit() and .dpms() as wrappers around .enable() and .disable(),
easing their future removal.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
When using atomic updates the encoder .enable() and .disable() helper
operations are preferred over the (then legacy) .prepare() and .commit()
operations. Implement .enable() and .disable() and rework .prepare(),
.commit() and .dpms() as wrappers around .enable() and .disable(),
easing their future removal.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The LVDS encoder doesn't support DPMS states, replace the DPMS operation
by enable/disable to avoid propagating DPMS states down to the encoder
code.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The plane source and destination size and positions are stored in the
plane state, and a private copy is kept in the rcar_du_plane objects.
Remove the private copy as it just duplicates the state.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Hook up the default .reset(), .atomic_duplicate_state() and
.atomic_free_state() helpers to ensure that state objects are properly
created and destroyed, and call drm_mode_config_reset() at init time to
create the initial state objects.
Framebuffer reference count also gets maintained automatically by the
transitional helpers except for the legacy page flip operation. Maintain
it explicitly there.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Use the new CRTC atomic transitional helpers drm_helper_crtc_mode_set()
and drm_helper_crtc_mode_set_base() to implement the CRTC .mode_set and
.mode_set_base operations. This delegates primary plane configuration to
the plane .atomic_update and .atomic_disable operations, removing
duplicate code from the CRTC implementation.
There is now no code path available to the driver in which to drop the
reference to the CRTC acquired in the .prepare() operation if an error
then occurs. The driver thus now leaks a reference if an error occurs
during mode set. So be it, this will be fixed in a further step of the
atomic update transition.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Implement the CRTC .atomic_begin() and .atomic_flush() operations, the
plane .atomic_check(), .atomic_update() and operations, and use the
transitional atomic helpers to implement the plane update and disable
operations on top of the new atomic operations.
The plane setup code can't be moved out of the CRTC start function
completely yet, as the atomic code paths are not taken every time the
CRTC needs to be started. This results in some code duplication that
will be fixed after switching to atomic updates completely.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The hardware plane allocator loops over all planes to find free
candidates. However, instead of looping over the number of hardware
planes, it loops over the number of software planes, which happens to be
larger by one unit. This has no effect in practise as the extra plane is
always cleared in the mask of free planes, but it should still be fixed
for correctness.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Explicitly create the CRTC primary plane instead of relying on the core
helpers to do so. This simplifies the plane logic by merging the KMS and
software planes.
Reject plane API operations on the primary planes for now, as that code
will anyway be refactored when implementing support for atomic updates.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Let's avoid magic constants. Beside increasing code readability, it will
also ensure that no location will be forgotten when raising the maximum
number of groups, CRTCs or LVDS encoders
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
fbdev emulation requires at least one connector, and will fail to
initialize if no connector has been successfully instantiated. Disable
it in that case and print an informational message instead of failing
probe with a confusing fbdev emulation error message.
It could be argued that probe should fail when no connector is present,
but the DU could still be useful in that case with the to-be-implemented
memory write-back support.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The DRM core vblank handling mechanism requires drivers to forcefully
turn vblank reporting off when disabling the CRTC, and to restore the
vblank reporting status when enabling the CRTC.
Implement this using the drm_crtc_vblank_on/off helpers. When disabling
vblank we must first wait for page flips to complete, so implement page
flip completion wait as well.
Finally, drm_crtc_vblank_off() must be called at startup to synchronize
the state of the vblank core code with the hardware, which is initially
disabled. This is performed at CRTC creation time, requiring vertical
blanking to be initialized before creating CRTCs.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Turning a CRTC off will prevent a queued page flip from ever completing,
potentially confusing userspace. Wait for queued page flips to complete
before turning the CRTC off to avoid this.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The next commit will need functions to be reordered to avoid forward
declarations. Do it separately to help review.
This only moves functions without any change to the code.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The drm_connector encoder field points to the encoder driving the
connector. No such association exists at init time, as all pipelines are
disabled. Don't set the field.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The function is meant to restore the fbdev mode in the lastclose
handler, not to be called at init time. Remove the call.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Decrementing the reference count of the previous endpoint node allows to
use the of_graph_get_next_endpoint function in a for_each_... style macro.
All current users of this function that pass a non-NULL prev parameter
(that is, soc_camera and imx-drm) are changed to not decrement the passed
prev argument's refcount themselves.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
DRM_GEM_CMA_HELPER is depend on HAVE_DMA_ATTRS, or it will break the
building. The related error (with allmodconfig under xtensa):
CC [M] drivers/gpu/drm/drm_gem_cma_helper.o
drivers/gpu/drm/drm_gem_cma_helper.c: In function 'drm_gem_cma_create':
drivers/gpu/drm/drm_gem_cma_helper.c:110:19: error: implicit declaration of function 'dma_alloc_writecombine' [-Werror=implicit-function-declaration]
cma_obj->vaddr = dma_alloc_writecombine(drm->dev, size,
^
drivers/gpu/drm/drm_gem_cma_helper.c:110:17: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
cma_obj->vaddr = dma_alloc_writecombine(drm->dev, size,
^
drivers/gpu/drm/drm_gem_cma_helper.c: In function 'drm_gem_cma_free_object':
drivers/gpu/drm/drm_gem_cma_helper.c:193:3: error: implicit declaration of function 'dma_free_writecombine' [-Werror=implicit-function-declaration]
dma_free_writecombine(gem_obj->dev->dev, cma_obj->base.size,
^
drivers/gpu/drm/drm_gem_cma_helper.c: In function 'drm_gem_cma_mmap_obj':
drivers/gpu/drm/drm_gem_cma_helper.c:330:8: error: implicit declaration of function 'dma_mmap_writecombine' [-Werror=implicit-function-declaration]
ret = dma_mmap_writecombine(cma_obj->base.dev->dev, vma,
^
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev:
drm: rcar-du: Implement support for interlaced modes
drm: rcar-du: Clamp DPMS states to on and off
drm: rcar-du: Enable hotplug detection on HDMI connector
drm: rcar-du: Output HSYNC instead of CSYNC
drm: rcar-du: Add support for external pixel clock
drm: rcar-du: Refactor DEFR8 feature
drm: rcar-du: Remove LVDS and HDMI encoders chaining restriction
drm: rcar-du: Configure pitch for chroma plane of multiplanar formats
drm: rcar-du: Don't fail probe in case of partial encoder init error
drm: adv7511: Remove interlaced mode check
Accept interlaced modes on the VGA and HDMI connectors and configure the
hardware accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The intermediate DPMS standby and suspend states are a thing from the
past. They only matter in practice for VGA CRT monitors, and are just a
power saving vs. resume time optimization. Given that they have never
been implemented properly in the rcar-du driver and that the Intel
driver has dropped them on the vga port years ago, it's safe to only
care about the on and off states.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
As HDMI support hotplug detection, enable HPD-based poll on HDMI
connectors.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The DU outputs by default a composite sync signal (XOR of the horizontal
and vertical sync signals) on the HSYNC output pin. As this can confuse
devices and isn't needed by any of the supported encoders, configure the
HSYNC pin to output the horizontal sync signal.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The DU uses the module functional clock as the default pixel clock, but
supports using an externally supplied pixel clock instead. Support this
by adding the external pixel clock to the DT bindings, and selecting the
clock automatically at runtime based on the requested mode pixel
frequency.
The input clock pins to DU channels routing is configurable, but
currently hardcoded to connect input clock i to channel i.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Rename the feature from RCAR_DU_FEATURE_DEFR8 to
RCAR_DU_FEATURE_EXT_CTRL_REGS to cover all extended control registers in
addition to the DEFR8 register.
Usage of the feature is refactored to optimize runtime operation and
prepare for external clock support.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The rcar-du driver refuses connecting an LVDS output to an HDMI encoder.
There is not technical reason for that restriction, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The PnMWR register containing the plane stride must be programmed with
correct stride values for both the luma and chroma planes when using a
multiplanar format. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
If an encoder fails to initialize the device can still be used without
the failed encoder. Don't propagate the error out of the probe function
but just skip the failed encoder.
As a special case a deferred probe request from the encoder is still
propagated out of the probe function in order not to break the deferred
probing mechanism.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Pull drm updates from Dave Airlie:
"Highlights:
- AMD KFD driver merge
This is the AMD HSA interface for exposing a lowlevel interface for
GPGPU use. They have an open source userspace built on top of this
interface, and the code looks as good as it was going to get out of
tree.
- Initial atomic modesetting work
The need for an atomic modesetting interface to allow userspace to
try and send a complete set of modesetting state to the driver has
arisen, and been suffering from neglect this past year. No more,
the start of the common code and changes for msm driver to use it
are in this tree. Ongoing work to get the userspace ioctl finished
and the code clean will probably wait until next kernel.
- DisplayID 1.3 and tiled monitor exposed to userspace.
Tiled monitor property is now exposed for userspace to make use of.
- Rockchip drm driver merged.
- imx gpu driver moved out of staging
Other stuff:
- core:
panel - MIPI DSI + new panels.
expose suggested x/y properties for virtual GPUs
- i915:
Initial Skylake (SKL) support
gen3/4 reset work
start of dri1/ums removal
infoframe tracking
fixes for lots of things.
- nouveau:
tegra k1 voltage support
GM204 modesetting support
GT21x memory reclocking work
- radeon:
CI dpm fixes
GPUVM improvements
Initial DPM fan control
- rcar-du:
HDMI support added
removed some support for old boards
slave encoder driver for Analog Devices adv7511
- exynos:
Exynos4415 SoC support
- msm:
a4xx gpu support
atomic helper conversion
- tegra:
iommu support
universal plane support
ganged-mode DSI support
- sti:
HDMI i2c improvements
- vmwgfx:
some late fixes.
- qxl:
use suggested x/y properties"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits)
drm: sti: fix module compilation issue
drm/i915: save/restore GMBUS freq across suspend/resume on gen4
drm: sti: correctly cleanup CRTC and planes
drm: sti: add HQVDP plane
drm: sti: add cursor plane
drm: sti: enable auxiliary CRTC
drm: sti: fix delay in VTG programming
drm: sti: prepare sti_tvout to support auxiliary crtc
drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off}
drm: sti: fix hdmi avi infoframe
drm: sti: remove event lock while disabling vblank
drm: sti: simplify gdp code
drm: sti: clear all mixer control
drm: sti: remove gpio for HDMI hot plug detection
drm: sti: allow to change hdmi ddc i2c adapter
drm/doc: Document drm_add_modes_noedid() usage
drm/i915: Remove '& 0xffff' from the mask given to WA_REG()
drm/i915: Invert the mask and val arguments in wa_add() and WA_REG()
drm: Zero out DRM object memory upon cleanup
drm/i915/bdw: Fix the write setting up the WIZ hashing mode
...
The DRM connector's encoder pointer is managed internally by the DRM
core and set to NULL when the DRM connector is disconnected from the
CRTC it was attached to. This results in a NULL pointer dereference in
the HDMI connector functions when trying to call the associated slave
encoder's operations.
Fix this by retrieving the slave encoder pointer from the R-Car
connector structure instead of the DRM connector structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
SoCs that integrate the DU have no internal HDMI encoder, support
external encoders only.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
DRM slave encoders require their associated struct drm_encoder instance
to be embedded in a struct drm_slave_encoder. This makes processing
encoders regardless of their types needlessly and painfully complex in
drivers that use a mix of slave encoders and custom encoders. Such a
driver will need to either create drm_slave_encoder instances that fake
their embedded encoder instance, or to turn all drm_encoder instances
into drm_slave_encoder instances.
Between the two evils, one must choose the lesser. Use drm_slave_encoder
everywhere.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add a new macro to downcast an rcar_du_encoder pointer to a drm_encoder
pointer and use it. This prepares for the replacement of the
rcar_drm_encoder encoder field with a drm_slave_encoder.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The encoder DT node will be needed to register an external HDMI encoder.
Pass it to the rcar_du_encoder_init() function to prepare for HDMI
support.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
All platforms now instantiate the DU through DT, platform data support
isn't needed anymore.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Propagate the error code on failure.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Some drivers erroneously treat the .pitch and .size fields of struct
drm_mode_create_dumb as inputs. While the include/uapi/drm/drm_mode.h
header has a comment denoting them as outputs, that seemingly wasn't
enough to make drivers use them properly.
The result is that some userspace doesn't explicitly zero out those
fields, assuming that the kernel won't use them. That causes problems
since the data within the structure might be uninitialized, so bogus
data may end up confusing drivers (ridiculously large values for the
pitch, ...).
This series attempts to improve the situation by fixing all drivers to
not use the output fields. Furthermore to spare new drivers this bad
surprise, the DRM core now zeros out these fields prior to handing the
data structure to the driver.
Lessons learned from this are that future IOCTLs should be properly
documented (in the DRM DocBook for example) and should be rigorously
defined. To prevent misuse like this, userspace should be required to
zero out all output fields. The kernel should check for this and fail
if that's not the case.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=QZIW
-----END PGP SIGNATURE-----
Merge tag 'drm/gem-cma/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux into drm-next
drm: Sanitize DRM_IOCTL_MODE_CREATE_DUMB input
Some drivers erroneously treat the .pitch and .size fields of struct
drm_mode_create_dumb as inputs. While the include/uapi/drm/drm_mode.h
header has a comment denoting them as outputs, that seemingly wasn't
enough to make drivers use them properly.
The result is that some userspace doesn't explicitly zero out those
fields, assuming that the kernel won't use them. That causes problems
since the data within the structure might be uninitialized, so bogus
data may end up confusing drivers (ridiculously large values for the
pitch, ...).
This series attempts to improve the situation by fixing all drivers to
not use the output fields. Furthermore to spare new drivers this bad
surprise, the DRM core now zeros out these fields prior to handing the
data structure to the driver.
Lessons learned from this are that future IOCTLs should be properly
documented (in the DRM DocBook for example) and should be rigorously
defined. To prevent misuse like this, userspace should be required to
zero out all output fields. The kernel should check for this and fail
if that's not the case.
* tag 'drm/gem-cma/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux:
drm/cma: Remove call to drm_gem_free_mmap_offset()
drm: Sanitize DRM_IOCTL_MODE_CREATE_DUMB input
drm/rcar: gem: dumb: pitch is an output
drm/omap: gem: dumb: pitch is an output
drm/cma: Introduce drm_gem_cma_dumb_create_internal()
drm/doc: Add GEM/CMA helpers to kerneldoc
drm/doc: mm: Fix indentation
drm/gem: Fix a few kerneldoc typos
When creating a dumb buffer object using the DRM_IOCTL_MODE_CREATE_DUMB
IOCTL, only the width, height, bpp and flags fields are inputs. The
caller is not guaranteed to zero out or set handle, pitch and size.
Drivers must not treat these values as possible inputs, otherwise they
may use uninitialized memory during the computation of the framebuffer
size.
The R-Car DU driver treats the pitch passed in from userspace as minimum
and will only overwrite it when the driver-computed pitch is larger,
allowing userspace to, intentionally or not, overallocate framebuffers.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This function is similar to drm_gem_cma_dumb_create() but targetted at
kernel internal users so that they can override the pitch and size
requirements of the dumb buffer.
It is important to make this difference because the IOCTL says that the
pitch and size fields are to be considered outputs and therefore should
not be used in computations of the framebuffer size. Internal users may
still want to use this code to avoid duplication and at the same time
pass on additional, driver-specific restrictions on the pitch and size.
While at it, convert the R-Car DU driver, the single user that overrides
the pitch, to use the new internal helper.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Just a bit of OCD cleanup on headers - this function isn't the core
interface any more but just a helper for drivers who haven't yet
transitioned to universal planes. Put the declaration at the right
spot and sprinkle necessary #includes over all drivers.
Maybe this helps to encourage driver maintainers to do the switch.
v2: Fix #include ordering for tegra, reported by 0-day builder.
v3: Include required headers, reported by Thierry.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
In preparation for DT support where panel timings will be described by a
DRM-agnostic video mode, replace the struct drm_mode_modeinfo instance
in the panel platform data with a struct videomode.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The "Renesas Corporation" listed in the copyright notice doesn't exist.
Replace it with "Renesas Electronics Corporation" and update the
copyright years.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
One step closer to dropping all the drm_bus_* code:
Add a driver->set_busid() callback and make all drivers use the generic
helpers. Nouveau is the only driver that uses two different bus-types with
the same drm_driver. This is totally broken if both buses are available on
the same machine (unlikely, but lets be safe). Therefore, we create two
different drivers for each platform during module_init() and set the
set_busid() callback respectively.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The maximum pitch constraint for the hardware is expressed in pixels.
Convert it to bytes to validate frame buffer creation, as frame buffer
pitches are expressed in bytes.
Reported-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
drivers/gpu/drm/rcar-du/rcar_du_drv.c:190:5: warning: "CONFIG_PM_SLEEP" is not defined [-Wundef]
Always use #ifdef with CONFIG symbols, never just bare #if
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Introduce generic functions to register and unregister connectors. This
provides a common place to add and remove associated user space
interfaces.
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The Renesas R-Car Display Unit driver is only useful on shmobile
unless build testing. The LVDS output is useful on an even more
reduced hardware set.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Many drm connectors do not need mode validation.
The patch makes this callback optional and removes dumb implementations.
v2: Rebase:
- imx move to a shared (but still dummy) ->mode_valid implementation.
- probe helpers have been extracted to drm_probe_helper.c
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The rcar_du_encoder_init() function can fail and return an error code.
Don't ignore it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Now that CRTC's have a primary plane, there's no need to track the
framebuffer in the CRTC. Replace all references to the CRTC fb with the
primary plane's fb.
This patch was generated by the Coccinelle semantic patching tool using
the following rules:
@@ struct drm_crtc C; @@
- (C).fb
+ C.primary->fb
@@ struct drm_crtc *C; @@
- (C)->fb
+ C->primary->fb
v3: Generate patch via coccinelle. Actual removal of crtc->fb has been
moved to a subsequent patch.
v2: Fixup several lingering crtc->fb instances that were missed in the
first patch iteration. [Rob Clark]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
rcar misc changes.
* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev:
drm/rcar-du: Add support for the r8a7791 DU
drm/rcar-du: Add LVDS_LANES quirk
drm/rcar-du: Split features and quirks
drm/rcar-du: Update plane pitch in .mode_set_base() operation
drm/rcar-du: Don't cast crtc to rcrtc twice in the same function
drm/rcar-du: fix return value check in rcar_du_lvdsenc_get_resources()
In case of error, the function devm_ioremap_resource() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR(). Also remove the dev_err call to avoid redundant
error message.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
[Remove the unneeded mem == NULL check]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The magic dance drm_platform_exit does is actually a remnant of the
old legacy shadow attach support for platform devices. Modern modesetting
drm drivers shouldn't do this any more (and usb/pci devices actually don't
do this).
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The r8a7791 DU is a stripped-down version of the r8a7790 DU with two
CRTCs and a single LVDS output.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
LVDS lanes 1 and 3 are switched in ES1 hardware (R8A7790). The problem
has been fixed in newer revisions, add a quirk to make the workaround
selectable.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
128-byte pitch alignement is not a hardware feature, it's a hardware
bug. Split it from the features field into a new quirks field. New
quirks will be added to support the R8A7791 SoC.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
When setting a new frame buffer with the mode set base operation the
pitch value might change. Set the hardware plane pitch register at the
same time as the plane base address in the rcar_du_plane_update_base()
function to make sure the pitch value always matches the frame buffer.
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
In case of error, the function devm_ioremap_resource() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR(). Also remove the dev_err call to avoid redundant
error message.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
For drivers which might want to disable fbdev legacy support.
Select the new option in all drivers for now, so this shouldn't result
in any change. Drivers need some work anyway to make fbdev support
optional (if they have it implemented, that is), so the recommended
way to expose this is by adding per-driver options. At least as long
as most drivers don't support disabling the fbdev support.
v2: Update for new drm drivers msm and rcar-du. Note that Rob's msm
driver can already take advantage of this, which allows us to build
msm without any fbdev depencies in the kernel!
v3: Move the MODULE_* stuff from the fbdev helper file to
drm_crtc_helper.c.
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Reviewed-by: Chon Ming Lee <chon.ming.lee@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This lets drivers see the flags requested by the application
[airlied: fixup for rcar/imx/msm]
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
So I've stumbled over drm_fasync and wondered what it does. Digging
that up is quite a story.
First I've had to read up on what this does and ended up being rather
bewildered why peopled loved signals so much back in the days that
they've created SIGIO just for that ...
Then I wondered how this ever works, and what that strange "No-op."
comment right above it should mean. After all calling the core fasync
helper is pretty obviously not a noop. After reading through the
kernels FASYNC implementation I've noticed that signals are only sent
out to the processes attached with FASYNC by calling kill_fasync.
No merged drm driver has ever done that.
After more digging I've found out that the only driver that ever used
this is the so called GAMMA driver. I've frankly never heard of such a
gpu brand ever before. Now FASYNC seems to not have been the only bad
thing with that driver, since Dave Airlie removed it from the drm
driver with prejudice:
commit 1430163b4bbf7b00367ea1066c1c5fe85dbeefed
Author: Dave Airlie <airlied@linux.ie>
Date: Sun Aug 29 12:04:35 2004 +0000
Drop GAMMA DRM from a great height ...
Long story short, the drm fasync support seems to be doing absolutely
nothing. And the only user of it was never merged into the upstream
kernel. And we don't need any fops->fasync callback since the fcntl
implementation in the kernel already implements the noop case
correctly.
So stop this particular cargo-cult and rip it all out.
v2: Kill drm_fasync assignments in rcar (newly added) and imx drivers
(somehow I've missed that one in staging). Also drop the reference in
the drm DocBook. ARM compile-fail reported by Rob Clark.
v3: Move the removal of dev->buf_asnyc assignment in drm_setup to this
patch here.
v4: Actually git add ... tsk.
Cc: Dave Airlie <airlied@linux.ie>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rob Clark <robdclark@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Merge the rcar stable branch that is being shared with the arm-soc tree.
Signed-off-by: Dave Airlie <airlied@redhat.com>
* pfdo/drm-rcar-for-v3.12: (220 commits)
drm/rcar-du: Add FBDEV emulation support
drm/rcar-du: Add internal LVDS encoder support
drm/rcar-du: Configure RGB output routing to DPAD0
drm/rcar-du: Rework output routing support
drm/rcar-du: Add support for DEFR8 register
drm/rcar-du: Add support for multiple groups
drm/rcar-du: Fix buffer pitch alignment for R8A7790 DU
drm/rcar-du: Add support for the R8A7790 DU
drm/rcar-du: Move output routing configuration to group
drm/rcar-du: Remove register definitions for the second channel
drm/rcar-du: Use dynamic number of CRTCs instead of CRTCs array size
drm/rcar-du: Introduce CRTCs groups
drm/rcar-du: Rename rcar_du_plane_(init|register) to rcar_du_planes_*
drm/rcar-du: Create rcar_du_planes structure
drm/rcar-du: Rename platform data fields to match what they describe
drm/rcar-du: Merge LVDS and VGA encoder code
drm/rcar-du: Split VGA encoder and connector
drm/rcar-du: Split LVDS encoder and connector
drm/rcar-du: Clarify comment regarding plane Y source coordinate
drm/rcar-du: Support per-CRTC clock and IRQ
...
Conflicts:
drivers/gpu/drm/i915/i915_dma.c
drivers/gpu/drm/i915/intel_pm.c
drivers/gpu/drm/qxl/qxl_release.c
Use the FB CMA helpers to implement FBDEV emulation support. The VGA
connector status must be reported as connector_status_connected instead
of connector_status_unknown to be usable by the emulation layer.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The R8A7790 includes two internal LVDS encoders. Support them in the DU
driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The R8A7790 DU variant has a single RGB output called DPAD0 that can be
fed with the output of DU0, DU1 or DU2. Making the routing configurable.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Alexey Brodkin