Parse IR data and report it to IR input-device. IR data is sent in 3 different
formats, but we only support the basic format as there is no way to send the
additional information to userspace.
All three formats are compatible with the basic IR data format so we need only
one parser.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The IR cam of the wiimote reports 4 trackable lights as absolute values. Since
we can turn the IR cam on and off, we register a separate input device so we can
react on open/close callbacks to save wiimote battery power when IR cam is not
needed.
The cam can be in four states: off, basic, extended and full
The DRM chooser automatically selects a proper DRM that includes all required IR
data so no information is lost.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add parser functions for accelerometer data reported by the wiimote. The data is
almost always reported in the same format, so we can use a single handler.
However, an own handler function is created for each DRM-mode because when IR
and extension support is added, each of them is parsed differently.
Also set the appropriate DRM including accelerometer data on DRM requests to
actually retrieve the accelerometer data.
Data is reported to userspace as ABS_RX/Y/Z values. The values are between -500
and 500 and 0 means no acceleration. See also userspace xwiimote library for
data parsing.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add new input device for every wiimote which is used to report accelerometer
data to userspace. Only if the input device is currently open, we make the
wiimote send accelerometer data. This saves a whole lot of energy on the wiimote
if an application is only interested in button input reports.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The wiimote has a single rumble motor. This adds force feedback support for
wiimote devices with FF_RUMBLE. The rumble motor is very simple and only
supports an on/off switch so no complex ff-effects are supported.
This also removes the event callback that was registered before but unused. The
ff-device overwrites this callback, anyway.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This adds support for the wiimote's rumble device. Every output report can
enable and disable the rumble motor. Hence, every output report must look up our
new RUMBLE flag and make sure that it does not unintentionally toggle the
rumble motor.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This is basically a more generic respin of 23746a6 ("HID: magicmouse: ignore
'ivalid report id' while switching modes") which got reverted later by
c3a492.
It turns out that on some configurations, this is actually still the case
and we are not able to detect in runtime.
The device reponds with 'invalid report id' when feature report switching it
into multitouch mode is sent to it.
This has been silently ignored before 0825411ade ("HID: bt: Wait for ACK
on Sent Reports"), but since this commit, it propagates -EIO from the _raw
callback .
So let the driver ignore -EIO as response to 0xd7,0x01 report, as that's
how the device reacts in normal mode.
Sad, but following reality.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=35022
Reported-by: Chase Douglas <chase.douglas@canonical.com>
Reported-by: Jaikumar Ganesh <jaikumarg@android.com>
Tested-by: Chase Douglas <chase.douglas@canonical.com>
Tested-by: Jaikumar Ganesh <jaikumarg@android.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We recently introduced locking into this function, but we missed an
error path which needs an unlock.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The wiimote resets the current drm when an extension is plugged in.
Fortunately, it also sends a status report in this situation so we just
reset the drm on every status report to keep the drm consistent.
Also handle return reports from the wiimote which indicate success and
failure of requests that we've sent.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The wiimote reports data in several data reporting modes (DRM). The DRM
request makes the wiimote send data in the requested drm.
The DRM mode can be set explicitely or can be chosen by the driver. To let
the driver choose the DRM mode, pass WIIPROTO_REQ_NULL placeholder to it. This
is no valid request and is replaced with an appropriate DRM.
Currently, the driver always sets the basic DRM_K mode, but this will be
extended when further peripherals like accelerometer and IR are supported.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This registers 4 led devices to allow controlling the wiimote leds via standard
LED sysfs API. It removes the four sysfs attributes so we don't have two APIs
for one device.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Even though the bluetooth hid backend does not react on open/close callbacks, we
should call them to be consistent with other hid drivers.
Also the new input open/close handlers will be used in future to prepare the
wiimote device for IR/extension input.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The new locking scheme in HID core allows us to remove a bit of synchronization.
Since the HID layer acts synchronously we simply register input core last and
there are no synchonization issues anymore.
Also register sysfs files after that to simplify the code.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is a small rare potential memory leak here. Also Walter Harms
points out that we can do a small cleanup as well by using kstrdup().
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Patch to add SiGma Micro-based keyboards (1c4f:0002) to hid-quirks.
These keyboards dont seem to allow the records to be initialized, and hence a
timeout occurs when the usbhid driver attempts to initialize them. The patch
just adds the signature for these keyboards to the hid-quirks list with the
setting HID_QUIRK_NO_INIT_REPORTS. This removes the 5-10 second wait for the
timeout to occur.
Signed-off-by: Jeremiah Matthey <sprg86@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch (as1482) adds a macro for testing whether or not a
pm_message value represents an autosuspend or autoresume (i.e., a
runtime PM) event. Encapsulating this notion seems preferable to
open-coding the test all over the place.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
This panel is also known as the Dell ST2220Tc.
Signed-off-by: jeffbrown@android.com
Reviewed-By: Benjamin Tissoires <Benjamin_Tissoires@logitech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This change fixes two problems.
First, it ensures that the hid-multitouch driver does not incorrectly
map GenericDesktop usages that are intended for other applications,
such as a Mouse.
Second, it sets the appropriate input properties so that user-space
can distinguish TouchScreen devices (INPUT_PROP_DIRECT) from
TouchPad devices (INPUT_PROP_POINTER) and configure them accordingly.
Signed-off-by: jeffbrown@android.com
Acked-By: Benjamin Tissoires <Benjamin_Tissoires@logitech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Support force feedback on the Dual USB Force Feedback Joypad (MP-8866).
Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Do this for backwards compatibility reasons (LOGIWHEELS_FF has
been split-off from LOGITECH_FF), so that users don't have
regressions with 'default' kernel configs.
Reported-and-tested-by: simon@mungewell.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Otherwise the generic driver wouldn't unbind from it and wouldn't
let hid-apple to automatically take over.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Added USB device IDs for MacBookAir4,2 keyboard. Device constants were
copied from the MacBookAir3,2 constants. The 4,2 device specification is
reportedly unchanged from the 3,2 predecessor and seems to work well.
Signed-off-by: Joshua V Dillon <jvdillon@gmail.com>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add touch surface resolution information. The size of the touch surfaces
has been determined to the hundredth of a mm.
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Michael Poole <mdpoole@troilus.org>
Cc: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
[jkosina@suse.cz: update comments and commit message]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix a return value propagation that was omitted in David Herrmann's
locking fix around hid_input_report().
Reported-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID low level drivers register new devices with the HID core which then
adds the devices to the HID bus. The HID bus normally immediately probes
an appropriate driver which then handles HID input for this device.
The ll driver now uses the hid_input_report() function to report input
events for a specific device. However, if the HID bus unloads the driver
at the same time (for instance via a call to
/sys/bus/hid/devices/<dev>/unbind) then the hdev->driver pointer may be
used by hid_input_report() and hid_device_remove() at the same time
which may cause hdev->driver to point to invalid memory.
This fix adds a semaphore to every hid device which protects
hdev->driver from asynchronous access. This semaphore is locked during
driver *_probe and *_remove and also inside hid_input_report(). The
*_probe and *_remove functions may sleep so the semaphore is good here,
however, hid_input_report() is in atomic context and hence only uses
down_trylock(). If it cannot acquire the lock it simply drops the input
package.
The low-level drivers report input events synchronously so
hid_input_report() should never be entered twice at the same time on the
same device. Hence, the lock should always be available. But if the
driver is currently probed/removed then the lock is not available and
dropping the package should be safe because this is what would have
happened if the package arrived some milliseconds earlier/later.
This also fixes another race condition while probing drivers:
First the *_probe function of the driver is called and only if that
succeeds, the related input device of hidinput is registered. If the low
level driver reports input events after the *_probe function returned
but before the input device is registered, then a NULL pointer
dereference will occur. (Equivalently on driver remove function).
This is not possible anymore, since the semaphore lock drops all
incoming packages until the driver/device is fully initialized.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
No need for freeing pm in case when it's not allocated.
Reported-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Bojan Prtvar <prtvar.b@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The description of lg4ff driver has to be changed to reflect the fact that the
driver now handles a lot more Logitech wh the Wii. Entry in Kconfig has been
renamed to LOGIWHEELS_FF
Signed-off-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Logitech driver sends Formula Force EX wheel a different command to
autocenering force. FFEX will accept the standard command used by the rest of
the wheels, but it won't set the centering properly.
Signed-off-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Wheel range of certain Logitech wheels - namely Driving Force GT, Driving Force
Pro, G25 and G27 can be adjusted. Minimu is 40 degrees, maximum 900. DFGT, G25
and G27 all use a common command, DFP uses another one. Range can be set from
userspace by writing to
"/sys/module/hid_logitech/drivers/hid:logitech/<dev>range". The driver use list
to store range of each connected wheel; it's not possible to use driver_data in
hid_device struct as it's already b hig-lg driver.
Signed-off-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch allows the lg4ff driver to switch wheels to the native mode. Since
this is specific to Logitech wheels only, it's handled in hid-lg4ff rather than
hid-lg.
Signed-off-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This is the first out of five patches me and Simon Wood (CC'd) have been
working on. It separates the handling of Logite from the generic lgff driver
and adds additional features specific for the Logitech wheels, namely
- Native mode support for Driving Force GT, Driving Force Pro, G25 and G27
wheels Every Logitech wheel reports itself as generic Logitech Driving Force
wheel (VID 046d, PID c294). This is done to ensu wheel will work on every USB
HID-aware system even when no Logitech driver is available. It however limits
the capabilit wheel - range is limited to 200 degrees, G25/G27 don't report the
clutch pedal and there is only one combined axis for t brake. The switch to
native mode is done via hardware-specific command which is different for each
wheel. When the wheel receives such command, it simulates reconnect and reports
to the OS with its actual PID.
- Adjustable wheel range DFGT, DFP, G25 and G27 have variable range of the
steering wheel. The range is limited by applying a maximum constant when the
wheel is turned beyond the allowed range. The limit as also set by a
hardware-specific command. There is a comm command for DFGT, G25 and G27 and
another one for DFP. It is probably possible to use the DFP command to limit
the range other Logitech wheels too, but this is not supported by the official
Logitech driver for Windows. The patch adds a sysfs interface which allows for
the range to be set from userspace.
- Fixed autocentering command All Logitech wheels support FF_AUTOCENTER effect.
The original implementation in the lgff driver didn't work well with patch
fixes it. According to USB communication sniffs the Formula Force EX (pretty
much rebranded original Driving Force accept the generic autocentering command,
this issue is also addressed by the patch
There are still some features this patch doesn't cover, but since some of them
will most likely require modifications of memless driver we have decided not to
include them yet.
As first we decided to move the handling of Logitech wheels from hid-lgff
driver to hid-lg4ff driver (originally used fo At also adds PID of Logitech
Driving Force GT.
Signed-off-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There are gamepads that share the same VID and PID but have different
report structure - instead of having 4 fields with one value they have
one field that can hold all 4 values. Make the driver cope with devices
using both styles.
Signed-off-by: Sergei Kolzun <x0r@dv-life.ru>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The config option needs to be a 'bool' and not a tristate, otheriwse
force feedback support never makes it into the module.
Signed-off-by: Sergei Kolzun <x0r@dv-life.ru>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add USB device ids for the new revision (MB110LL/B) of Apple's wired aluminum
keyboard. I have only confirmed that the ANSI version is correct - it is
assumed that the ISO and JIS versions follow the standard numbering convention.
Signed-off-by: Dan Bastone <dan@pwienterprises.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for the CSR panel built by XAT.
Signed-off-by: Ice Chien <ice.chien@accupoint.com.tw>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The following symbols are not referenced outside this file so
there's no need for it to be in the global name space.
pcmidi_sustained_note_release
init_sustain_timers
stop_sustain_timers
pcmidi_handle_report
pcmidi_setup_extra_keys
pcmidi_snd_initialise
pcmidi_snd_terminate
Make them static.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hid_hw_stop() must be called in ax_probe() error path if hid_hw_start()
was successful.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Microsoft comfort mouse 4500 report descriptor contains duplicate
usages for horizontal wheel. This patch fixes the wrong mapping
caused by that.
Signed-off-by: Ari Savolainen <ari.m.savolainen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for UC-Logic Tablet WP1062 by fixing its report descriptor.
This tablet is sold as Monoprice 10X6.25 Inches Graphic Drawing Tablet.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add sysfs files for each led of the wiimote. Writing 1 to the file
enables the led and 0 disables the led.
We do not need memory barriers when checking wdata->ready since we use
a spinlock directly after it.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Save the current state of the leds in the wiimote data structure. This
allows us to discard new led requests that wouldn't change anything.
Protect the whole state structure by a spinlock. Every wiiproto_*
function expects this spinlock to be held when called.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add new request that sets the leds on the target device. Also, per
default, set led1 after initializing a device.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Parse input report 0x30 from the wiimote as button input. We need to
send events for all buttons on every input report because the wiimote
does not send events for single buttons but always for all buttons
to us. The input layer, however, filters redundant events.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Create array of all event handlers and call each handler when we
receive the related event.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The raw hid output function that is supported by bluetooth low-level
hid driver does not provide an output queue and also may sleep. The
wiimote driver, though, may need to send data in atomic context so
this patch adds a buffered output queue for the wiimote driver.
We use the shared workqueue to send our buffer to the hid device.
There is always only one active worker which flushes the whole output
queue to the device. If our queue is full, every further
output is discarded.
Special care is needed in the deinitialization routine. When
wiimote_hid_remove is called, HID input is already disabled, but HID
output may still be used from our worker and is then discarded by the
lower HID layers. Therefore, we can safely disable the input layer since it
is the only layer that still sends input events.
Future sysfs attributes must be freed before unregistering input to
avoid the sysfs handlers to send input events to a non-existing input
layer.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The wiimote driver needs to send raw output reports to the wiimote
device. Otherwise we could not manage the peripherals of the wiimote
or perform memory operations on the wiimote.
We cannot use hidinput_input_event of the lowlevel hid driver, since
this does not accept raw input. Therefore, we need to use the same
function that hidraw uses to send output. Side effect is, the raw
output function is not buffered and can sleep.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The wiimote first starts HID hardware and then registers the input
device. We need to synchronize the startup so no event handler will
start parsing events when the wiimote device is not ready, yet.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Register input device so the wiimote can report input events on
it. We do not use HIDINPUT because the wiimote does not provide any
descriptor table which might be used by HIDINPUT. So we avoid
having HIDINPUT parse the wiimote descriptor and create unrelated
or unknown event flags. Instead we register our own input device
that we have full control of.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Allocate wiimote device structure with all wiimote related data
when registering new wiimote devices.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The wiimote uses a fake HID protocol. Hence, we need to prevent
HIDINPUT and HIDDEV from parsing wiimote data and instead parse
raw hid events.
Add VID/PID to hid-core so the special driver is loaded on new
wiimotes.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add stub driver for the Nintendo Wii Remote. The wii remote uses
the HID protocol to communicate with the host over bluetooth. Hence,
add dependency for HIDP and place driver in hid subsystem.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add force feedback support for Holtek On Line Grip based HID devices.
The protocol is more complex than that of most other rumblepads, but the
device still needs to be handled as a memoryless one.
Tested by Cleber de Mattos Casali with a 1241:5015 "Clone Joypad Super
Power Fire" gamepad, with help from Hendrik Iben <hendrik_iben@web.de>.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Tested-by: Cleber de Mattos Casali <clebercasali@yahoo.com.br>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
while merging hid-stantum into hid-multitouch, I did not correctly copy/paste
the VIDs for those devices. This patch fixes it.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In case a device does not provide the feature "Maximum Contact Count",
or set it at 0, the maxcontacts field may be at 0 while calling
input_mt_init_slots.
This patch ensures that hid-multitouch will allways report
ABS_MT_SLOT and ABS_MT_TRACKING_ID to the user space.
This corrects a bug found with some Ilitek devices that has been
integrated in 3.0-rc0.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit 23746a66d7.
It turned out that the actual reason for failure is not the device
firmware, but bug in Bluetooth stack, which will be fixed by
patch by Ville Tervo which corrects the mask handling for CSR 1.1
Dongles.
Reported-and-tested-by: Ed Tomlinson <edt@aei.ca>
Reported-and-tested-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Digital Media 3000 keyboard (USB id: 0x0730) features the same 1-5
Application Launch keys that the Natural Ergonomic 4000 has. Add its
usb id to the list of quirks.
Reported-by: Khelben Blackstaff <eye.of.the.8eholder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The accelerometers/gyro on the Sixaxis are reported in the wrong
endianness (ie. not compatible with HID), so this patch intercepts
the report and swaps the appropriate bytes over.
Accelerometers are scaled with a nominal value of +/-4000 = 1G,
maximum value would be around +/-32768 = 8G.
Gyro on my device always reports -32768, might need some calibration
set within the controller.
Fix extracted from previous patch submission:
https://patchwork.kernel.org/patch/95212/
Signed-off-by: Marcin Tolysz <tolysz@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On rare occassions raw events can be triggered before drvdata gets set up
which leads to NULL pointer dereferences. This was only observed with pyra on
2.6.39, but is fixed for all devices now to play it save.
kovaplus returned wrong actual values when profile change was initiated from host.
Added range checks for setting actual profile on all devices.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Removed analog feature report enums and modified code in roccat_common
to reflect this. Non standard conform Kone got its own copy of the old
code. That helps extracting more generalizations for newer devices.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
As module roccat is needed by all devices, it's the toplevel
menu entry with all devices dependent.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Added binary sysfs attribute to support new functionality the manufacturer
added to koneplus.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Since the inclusion of eGalax devices in 2.6.39, I've got some
bug reports for 480d and other devices.
The problem lies in the reports descriptors: eGalax supports both
pen and fingers, and so the reports descriptors contained both.
But hid-multitouch relies on them to detect the last item in each
field to send the multitouch events. In 480d, the last item is not
Y as it should but Pressure. That means that the fields are not
aligned and X,Y are at 0,0 (the other touch coordinates of the report).
With this patch, the detection is made only when the field ContactID
has been detected inside the collection.
There is still a problem with the detections of the range as stylus
and fingers may not have the same min/max, but it's a start.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Speedlink VAD Cezanne have a hardware bug that makes the cursor "jump" from one
place to another every now and then. The issue are relative motion events
erroneously reported by the device, each having a distance value of +256. This
256 can in fact never occur due to real motion, therefore those events can
safely be ignored. The driver also drops useless EV_REL events with a value of
0, that the device sends every time it sends an "real" EV_REL or EV_KEY event.
Signed-off-by: Stefan Kriwanek <mail@stefankriwanek.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- Add the quirk "NOGET" to make the wheel work at all in native mode.
- Replace the somehow broken report descriptor with a custom one to have
separate throttle and brake axes.
As there are significant differences in the descriptor (original descriptor
"hides" the separate axes in a 24 bit FF00 usagepage, new descripter replaces
that with two individual 8 bit desktop.y and desktop.rz usages) I provided a
complete replacement descriptor instead trying to patch the original one.
Patching the descriptor seems not feasible as the new one is much larger.
Note: To actually test this you have to use the tool "ltwheelconf" to put the
DFP into it's native mode - See below for more info.
Background:
Most Logitech wheels are initially reporting themselves with a "fallback"
deviceID (USB_DEVICE_ID_LOGITECH_WHEEL - 0xc294), in order to make sure they
are working even without having the proper driver installed.
If the Logitech driver is installed it sends a special command to the wheel
which sets the wheel to "native mode", enabling enhance features like:
- Clutch pedal
- extended wheel rotation range (up to 900 degrees)
- H-gate shifter
- separate axis for throttle / brake
- all buttons
When the wheel is set to native mode it basically disconnects and reconnects
with a different deviceID (USB_DEVICE_ID_LOGITECH_DFP_WHEEL - 0xc298 in this
case).
I am working on a userspace tool [1] which does the switching from fallback to
native mode. During development I found out that the Driving Force Pro wheel
is not supported in native mode - quierk NOGET is missing and the throttle and
brake axes are reported in a combined way only.
Signed-off-by: Michael Bauer <michael@m-bauer.org>
Signed-off-by: Simon Wood <simon@mungewell.org>
[1] https://github.com/TripleSpeeder/LTWheelConf
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There are a couple use after free bugs here.
Signed-off-by: Dan Carpenter <error27@gmail.com>
[jkosina@suse.cz: removed already fixed hunk]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add 5543:0064 UC-Logic Technology Corp. Aiptek HyperPen 10000U to quirks with
HID_QUIRK_MULTI_INPUT.
Originally the device is reporting the x,y coordinates on Z and RX. By adding
this quirk, there will be two kernel devices. The first one is muted and the
second device will report coordinates on X and Y.
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit 6cb4b04079 ("HID: hiddev: fix race between hiddev_disconnect
and hiddev_release") made it possible to access hiddev (for unlocking
the existance mutex) once hiddev has been kfreed.
Change the order so that this can not happen (always unlock the mutex first,
it is needed only to protect access to ->exist and ->open).
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (205 commits)
USB: EHCI: Remove SPARC_LEON {read,write}_be definitions from ehci.h
USB: UHCI: Support big endian GRUSBHC HC
sparc: add {read,write}*_be routines
USB: UHCI: Add support for big endian descriptors
USB: UHCI: Use ACCESS_ONCE rather than using a full compiler barrier
USB: UHCI: Add support for big endian mmio
usb-storage: Correct adjust_quirks to include latest flags
usb/isp1760: Fix possible unlink problems
usb/isp1760: Move function isp1760_endpoint_disable() within file.
USB: remove remaining usages of hcd->state from usbcore and fix regression
usb: musb: ux500: add configuration and build options for ux500 dma
usb: musb: ux500: add dma glue layer for ux500
usb: musb: ux500: add dma name for ux500
usb: musb: ux500: add ux500 specific code for gadget side
usb: musb: fix compile error
usb-storage: fix up the unusual_realtek device list
USB: gadget: f_audio: Fix invalid dereference of initdata
EHCI: don't rescan interrupt QHs needlessly
OHCI: fix regression caused by nVidia shutdown workaround
USB: OTG: msm: Free VCCCX regulator even if we can't set the voltage
...
This patch sorts the defs for the MT_CLS. I choose to split
generic classes and device specific ones to be able to add
more generic classes in the future.
It also put eGalax devices at their right place (alphabetically)
in mt_devices.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stantum devices used to work with MT_CLS_STANTUM but MT_CLS_CONFIDENCE
is exactly the same. This patch switches them to this generic class,
and remove the unused MT_CLS_STANTUM.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch introduce support for Unitec panels.
This device has not been optimized in term of kernel processing
operations (default class), but it will work.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch introduce support for Touch International panels.
This device has not been optimized in term of kernel processing
operations (default class), but it will work.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch introduce support for GoodTouch panels.
This device has not been optimized in term of kernel processing
operations (default class), but it will work.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch introduce support for CVTouch panels.
This device has not been optimized in term of kernel processing
operations (default class), but it will work.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch introduce support for ActionStar panels.
This device has not been optimized in term of kernel processing
operations (default class), but it will work.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When hiddev_disconnect() runs with chardev open, it will proceed with
usbhid_close(). When userspace in parallel runs the hiddev_release(),
it sees !hiddev->exists (as it has been already set so by
hiddev_disconnect()) and kfrees hiddev while hiddev_disconnect() hasn't
finished yet.
Serialize the access to hiddev->exists and hiddev->open by existancelock.
Reported-by: mike-@cinci.rr.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The device reponds with 'invalid report id' when feature report switching it
into multitouch mode is sent to it.
This has been silently ignored before 0825411ade ("HID: bt: Wait for ACK
on Sent Reports"), but since this commit, it propagates -EIO from the _raw
callback .
So let the driver ignore -EIO as response to 0xd7,0x01 report, as that's
how the device reacts in normal mode.
Sad, but following reality.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=35022
Tested-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
I'm using a Data Modul EasyTouch USB multitouch controller,
which is issuing a hid report with a size equals to 0. The rsize
value gets set to 536870912 and Linux is crashing in the memset
because the value is too big.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for Elo TouchSystems 2515 IntelliTouch Plus
that can be found in Lenovo A700 all-in-one.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
I've got a Tivo Slide bluetooth remote/dongle, which uses a fair number
of hid usages that aren't currently mapped in hid-input.c. I'd initially
written additions to hid-input.c with just this device in mind,
including some bits that were specific to the device. This go around,
I'm looking at adding/correcting as many generic HID usages from the HID
Usage Tables, version 1.12, as I can -- which also serves to enable all
but four of the buttons on the Tivo Slide remote[*].
Outside of fixing the obviously incorrect mapping of 0xc 0x45 from
KEY_RADIO to KEY_RIGHT, and making use of the new KEY_IMAGES (just added
in 2.6.39-rc4) for AL Image Browser instead of KEY_MEDIA, these are
purely additions, and thus should have no negative impact on any already
functional HID devices. Most of the added mappings seemed to be
perfectly logical to me, but there were a few that were mapped on more
of an "I think this makes the most sense" basis.
[*] I'll handle the last four tivo buttons via an hid-tivo.c follow-up.
CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
startup_profile and actual_profile didn't work as expected. Also
as the actual profile is persistent, the distinction between the
two was ambiguous, so both use the same code now and startup_profile
has been deprecated. Also the event is now propagated through
chardev. The userland tool has been updated to support this change.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch enables support for Lumio optical devices.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
As they are static members of fix size, there is no need to NULL-check them.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
With CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y compilation of PicoLCD
driver fails on copy_from_user(), without it a warning is generated:
CC [M] drivers/hid/hid-picolcd.o
In file included from /usr/src/linux-2.6/arch/x86/include/asm/uaccess.h:571,
from /usr/src/linux-2.6/arch/x86/include/asm/sections.h:5,
from /usr/src/linux-2.6/arch/x86/include/asm/hw_irq.h:26,
from /usr/src/linux-2.6/include/linux/irq.h:359,
from /usr/src/linux-2.6/arch/x86/include/asm/hardirq.h:5,
from /usr/src/linux-2.6/include/linux/hardirq.h:7,
from /usr/src/linux-2.6/include/linux/interrupt.h:12,
from /usr/src/linux-2.6/include/linux/usb.h:15,
from /usr/src/linux-2.6/drivers/hid/hid-picolcd.c:25:
In function 'copy_from_user',
inlined from 'picolcd_debug_eeprom_write' at drivers/hid/hid-picolcd.c:1592:
arch/x86/include/asm/uaccess_32.h:212: error: call to 'copy_from_user_overflow' declared with attribute error: copy_from_user() buffer size is not provably correct
gcc-4.4.5 is not able to track size calculation when it is stored into
a variable, thus tell copy_from_user() maximum size via
min(*max-size*, *effective-size*) explicitly and inline how much to copy
at most.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Added several new devices to ldusb and excluded them from the HID driver.
Signed-off-by: Michael Hund <mhund@ld-didactic.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Gere's a small patch to add support for the Logitech G27 wheel, since
the prior patch only added FF support for the Driving Force Pro and G25.
The patch contains the changes from the G25 and DFP, too.
I tested the changes with wine/LFS and got full support for all axes and
buttons.
Signed-off: Peter Gundermann <slim-one@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hiddev_read: in case mutex_lock_interruptible will be interrupted
remove the task from the wait queue.
Signed-off-by: Peter Waechtler <pwaechtler@mac.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Sony Navigation Controller needs a special report to be sent to it
before it is able to operate, the same way as other Sony controllers
do.
Tested-by: Jacek Lukas Wotka <jlw@team-fatal.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Barcode handheld scanners produced by Symbol Technologies (0x05e0/0x0800
and 0x05e0/0x1300) need HID_QUIRK_NOGET, otherwise their firmware exposes
trouble during enumeration/initialization.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch include MosArt devices into hid-multitouch.
MosArt devices now support mt-protocol B.
We also need to introduce a new quirk for mosart devices to support
their contactID.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds PenMount support to hid-multitouch. A new class
MT_CLS_CONFIDENCE is defined for PenMount, since it uses HID_DG_CONFIDENCE as
the valid flag.
Signed-off-by: John Sung <penmount.touch@gmail.com>
[benjamin.tissoires@enac.fr: rebased on top of last_index_field changes]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
the current implementation requires the devices to report
HID_DG_CONTACTCOUNT to set the last_field_index value.
However, devices reporting in serial mode (DWAV and PenMount)
do not send this field.
Other devices (3M) add other fields in the reports descriptor
that are not multitouch related at the end, thus the need to
add a special case in the default case when handling events.
A first work around has been set up but with PenMount devices,
we have reached the limit.
The idea is to calculate the last_field_index by relying only on
multitouch fields the device send. This allows us to remove
the handling of non-multitouch events in hid-multitouch, and
guarantee that the function mt_emit_event is always called.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-and-tested-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: Add support for CH Pro Throttle
HID: hid-magicmouse: Increase evdev buffer size
HID: add FF support for Logitech G25/G27
HID: roccat: Add support for wireless variant of Pyra
HID: Fix typo Keyoutch -> Keytouch
HID: add support for Skycable 0x3f07 wireless presenter
CH Pro Throttle needs NOGET the same way as other products from
the same vendor require.
Reported-by: Unavowed <unavowed@vexillium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The evdev buffer isn't big enough when you get many fingers on the
device. Bump up the buffer to a reasonable size, matching what other
multitouch devices use. Without this change, events may be discarded in
the evdev buffer before they are read.
Reported-by: Simon Budig <simon@budig.de>
Cc: Henrik Rydberg <rydberg@euromail.se>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: stable@kernel.org
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Small patch to add support for the G25/G27 by adding USB ID's
as suggested by Peter.
Boots but otherwise untested as I don't have hardware, .debs for
kernel (2.6.38) here if want to test/run Ubuntu/Debian:
http://www.mungewell.org/Logitech_Wii_Wheel/
Reported-by: Peter Gundermann <slim-one@users.sourceforge.net>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There was an extra tab so the close curly brace didn't match up with
the right if statement.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Wireless variant of Roccat Pyra finally has been tested with
existing driver.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch merges the hid-3m-pct driver into hid-multitouch.
To keep devices working the same way they used to with hid-3m-pct,
we need to add two signal/noise ratios for width and height.
We also need to work on width/height to send proper
ABS_MT_ORIENTATION flag.
Importing 3M into hid-multitouch also solved the bug in which
devices handling width and height in their report descriptors
did not show ABS_MT_TOUCH_MAJOR and ABS_MT_TOUCH_MINOR.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Stéphane Chatty <chatty@enac.fr>
Reviewed-and-tested-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There may be multiple ways of controlling the backlight on a given
machine. Allow drivers to expose the type of interface they are
providing, making it possible for userspace to make appropriate policy
decisions.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The way the input_set_abs_params was called for the new composite field
ABS_MT_ORIENTATION was not very clear at second reading. We can remove the
non-necessary call to set_abs and use the simple call to input_set_abs_params.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Stéphane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch merges hid-cando into the unified multitouch driver.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Stéphane Chatty <chatty@enac.fr>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch merges hid-stantum to the generic multitouch driver.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Stéphane Chatty <chatty@enac.fr>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch enables support of autodetection of maxcontacts.
When adding support for a new device, one is now able to let
the device tell how many contacts it supports, or to manually
set the value if the device happens to provide wrong information.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Stéphane Chatty <chatty@enac.fr>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This device contains the very same bug in report descriptor as the
Ortek ones do (i.e. LogicalMinimum == 1, which is wrong for the key
array).
As we have more reports for the Ortek devices, we are keeping the driver
name for now. Apparently there is a chip producer which sells chip with
this buggy descriptor to multiple vendors. Thus if such reports start
to come at highger frequency, we'll either have to rename the driver
accordingly, or come up with more generic workaround.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (64 commits)
Input: tsc2005 - remove 'disable' sysfs attribute
Input: tsc2005 - add open/close
Input: tsc2005 - handle read errors from SPI layer
Input: tsc2005 - do not rearm timer in hardirq handler
Input: tsc2005 - don't use work for 'pen up' handling
Input: tsc2005 - do not use 0 in place of NULL
Input: tsc2005 - use true/false for boolean variables
Input: tsc2005 - hide selftest attribute if we can't reset
Input: tsc2005 - rework driver initialization code
Input: tsc2005 - set up bus type in input device
Input: tsc2005 - set up parent device
Input: tsc2005 - clear driver data after unbinding
Input: tsc2005 - add module description
Input: tsc2005 - remove driver banner message
Input: tsc2005 - remove incorrect module alias
Input: tsc2005 - convert to using dev_pm_ops
Input: tsc2005 - use spi_get/set_drvdata()
Input: introduce tsc2005 driver
Input: xen-kbdfront - move to drivers/input/misc
Input: xen-kbdfront - add grant reference for shared page
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (48 commits)
HID: add support for Logitech Driving Force Pro wheel
HID: hid-ortek: remove spurious reference
HID: add support for Ortek PKB-1700
HID: roccat-koneplus: vorrect mode of sysfs attr 'sensor'
HID: hid-ntrig: init settle and mode check
HID: merge hid-egalax into hid-multitouch
HID: hid-multitouch: Send events per slot if CONTACTCOUNT is missing
HID: ntrig remove if and drop an indent
HID: ACRUX - activate the device immediately after binding
HID: ntrig: apply NO_INIT_REPORTS quirk
HID: hid-magicmouse: Correct touch orientation direction
HID: ntrig don't dereference unclaimed hidinput
HID: Do not create input devices for feature reports
HID: bt hidp: send Output reports using SET_REPORT on the Control channel
HID: hid-sony.c: Fix sending Output reports to the Sixaxis
HID: add support for Keytouch IEC 60945
HID: Add HID Report Descriptor to sysfs
HID: add IRTOUCH infrared USB to hid_have_special_driver
HID: kernel oops in out_cleanup in function hidinput_connect
HID: Add teletext/color keys - gyration remote - EU version (GYAR3101CKDE)
...
Add force feedback support for Logitech Driving Force Pro wheel.
Device IDs reported by Michal Malý.
Reported-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Remove spurious bugzilla reference from the source comment header.
Also fix the comment to be more correct (it's HID report descriptor
rather than USB).
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
As reported on http://ubuntuforums.org/showthread.php?t=1594007 the
PKB-1700 needs same special handling as WKB-2000. This change is
originally based on patch posted by user asmoore82 on the Ubuntu
forums.
Cc: stable@kernel.org
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Mode of sysfs attribute 'sensor' was wrongly set to writeonly.
Corrected this to readwrite.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Adding a wait before the wakeup signal.
As a precautionary measure sanity check the current sensor mode. If
needed reset it to "dual".
When the device is responding poorly and needs the wakeup call, it was
missing it. Giving it a chance to settle first improves the chances
that signal gets through.
Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch merges the hid-egalax driver into hid-multitouch. There
are two types of devices support by the hid-egalax driver: resistive
and capacitive. Here, they are implicitly distinguished by the absence
of a HID_DG_CONTACTCOUNT field in the latter, so no special code path
needs to be introduced.
As a side effect, this patch fixes the broken suspend/resume behavior
in the old driver.
[rydberg@euromail.se: minor fixups]
Signed-off-by: Richard Nauber <Richard.Nauber@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The recent capacitive DWAV firmwares do not use the CONTACTCOUNT
field, and the touch frame boundary can therefore not be determined.
This patch makes the driver report the touch frame at each completed
slot instead.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch add multitouch support for the MacBookPro8,1 and
MacBookPro8,2 models.
Cc: stable@kernel.org
Signed-off-by: Andy Botting <andy@andybotting.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This device does not tolerate delayed opening and goes into a coma if
we try to that. Ubuntu even has a crutch for udev that opened the device
upon seeing it for the first time, but it did not work if we happened to
boot with the device attached, since by the time userspace got around
opening the device it was too late. Let's start the device immediately
to deal with this issue.
Reported-by: Sergei Kolzun <x0r@dv-life.ru>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Probing reports does bad things with some ntrig firmwares, better to
just leave them alone.
Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The magic trackpad and mouse both report touch orientation in opposite
direction to the bcm5974 driver and what is written in
Documents/input/multi-touch-protocol.txt. This patch reverts the
direction, so that all in-kernel devices with this feature behave the
same way.
Since no known application has been utilizing this information yet, it
seems appropriate also for stable.
Cc: stable@kernel.org
Cc: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When the multi input quirk is set, there is a new input device
created for every feature report. Since the idea is to present
features per hid device, not per input device, revert back to
the original report loop and change the feature_mapping() callback
to not take the input device as argument.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Tested-by: Benjamin Tissoires <benjmain.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Sixaxis does not want the report_id as part of the data packet in
Output reports, so we have to discard buf[0] when sending the actual
control message.
Add also some documentation about that and about why
hdev->hid_output_raw_report needs to be overridden.
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The keyboard has several bugs in its report descriptor, most
importantly the Logical Min/Max are completely off.
Replace it with simplified descriptor which describes it properly.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a new binary sysfs entry called report_descriptor which contains
the HID report descriptor.
Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Without this patch, the device is handled by hidinput and does
not have the right behavior.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Goto out_cleanup infers a kernel oops: hidinput_disconnect calls
input_unregister_driver to all members of hid->inputs.
However, hidinput already has been added to hid->inputs even
though input_register_device was not called.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for 5 keys which can be found
only on the EU version of the gyration remote, which has been not
mapped before.
Signed-off-by: Steffen Barszus <steffenbpunkt[AT]googlemail[DOT]com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
I already got some feedback for this module, telling me red and blue keys are
exchanged. I checked it, and they are right. Due to my incorrect userspace
settings I missed this during my testing.
Signed-off-by: Chris Schlund <chrisschlund@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Per the HID Specification, Feature reports must be sent and received on
the Configuration endpoint (EP 0) through the Set_Report/Get_Report
interfaces. This patch adds two ioctls to hidraw to set and get feature
reports to and from the device. Modifications were made to hidraw and
usbhid.
New hidraw ioctls:
HIDIOCSFEATURE - Perform a Set_Report transfer of a Feature report.
HIDIOCGFEATURE - Perform a Get_Report transfer of a Feature report.
Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It was desired that the header roccat.h should be named hid-roccat.h
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
pointer to device was cleared too early. This is fixed now.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Class was destroyed before starting the unregistering driver chain.
Disconnecting a device from roccat chardev in this process then
raised a NULL pointer dereference.
Fixed this by destroying class after unregistering driver.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Roccat chardev was reworked to support only a defined report size per
device and this can be retreived by an ioctl now to enable future changes
in report definitions.
Header was moved/renamed from drivers/hid to include/linux for accessibility.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On newer kernels the device freezes occasionally on initialization with just
70msec between reads. Increased this value to safe 100msec.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for Roccat Kova[+] mouse.
Userland tools can soon be found at http://sourceforge.net/projects/roccat
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Module hid-roccat-common contains functions used by roccat device driver
modules to reduce code duplication.
At the moment it contains just two wrapper methods for usb_control_msg
that ensure that the buffer used for transfer is dma capable which wasn't
the case before.
The kconfig option is not visible to the user but will be selected by the
device specific drivers.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Using the new hid_err macros instead of dev_err.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Roccat chardev is a dependency of all device specific drivers, so
the empty definitions are not needed anymore.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hidraw_disconnect() first sets an entry in hidraw_table to NULL
and calls device_destroy() afterwards. The thereby called
hidraw_release() tries to read this already cleared value resulting
in never removing any device from the list.
This got fixed by changing the order of events.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add list of (supposedly) supported gamepads to dragonrise driver Kconfig
description.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for DragonRise Inc. gamepad with USB PID 0x0011 by fixing its report
descriptor. This mainly removes spurious axis.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Rename drivers/hid/hid-drff.c (a DragonRise Inc. force feedback gamepad driver)
to driver/hid/hid-dr.c.
This prepares it for addition of support for another gamepad, without force
feedback.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
All users of old style get/setkeycode methids have been converted so
it is time to retire them.
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Setting of the return value of hidraw_read() uses the += operator when
= is more appropriate. There is no case where ret can be anything
other than zero when the assignment is made, making = equivalent to
+= and much more clear.
Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for IrTouch 42 inches.
Tested-by: Victor Zhuk <v.zhuk@acs-ltd.ru>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch renames MT_CLS_DUAL1 to MT_CLS_DUAL_INRANGE_CONTACTID
and MT_CLS_DUAL2 to MT_CLS_DUAL_INRANGE_CONTACTNUMBER for better
readability.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The safest quirk for a device (the one that works out of the box for
most of them) is MT_QUIRK_NOT_SEEN_MEANS_UP. Indeed, it does not
make any assumption on the device. When adding a new device, we can
easily test it against MT_CLS_DEFAULT, and then optimize it with other
quirks: that's why no device use MT_CLS_DEFAULT right now.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.
This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel. A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).
Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using cat or something to read from binary attributes would try to do an
additional read with offset equal to filesize. This resulted in an invalid
attribute error. This is fixed by giving the right answer instead of EINVAL.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch add support for Roccat Arvo keyboard. Arvo has 5 additional
configurable buttons and the ability to deactivate certain keys.
Userland tools can soon be found at http://sourceforge.net/projects/roccat
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
kmalloc() may fail, if so return -ENOMEM.
Also koneplus_init_koneplus_device_struct() should check return code
of koneplus_get_startup_profile() and propagate its return code.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: hid-multitouch: minor fixes based on additional review
HID: Switch turbox/mosart touchscreen to hid-mosart
HID: add Add Cando touch screen 10.1-inch product id
HID: hid-mulitouch: add support for the 'Sensing Win7-TwoFinger'
HID: hid-multitouch: add support for Cypress TrueTouch panels
HID: hid-multitouch: support for PixCir-based panels
HID: set HID_MAX_FIELD at 128
HID: add feature_mapping callback
* amended Kconfig (PixCir and Hanvon are the same panel but with
different name)
* insert field name in mt_class and retrieving it in mt_probe
* add 2 quirks: MT_QUIRK_VALID_IS_INRANGE, MT_QUIRK_VALID_IS_CONFIDENCE,
in order to find the field "valid"
* inlined slot_is_contactid and slot_is_contact_number
* cosmetics changes (tabs and comments)
* do not send unnecessary properties once the touch is up
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This device used the MULTI_INPUT quirk whereas it could be used
with hid-mosart instead to support the multitouch part.
Reference: https://bugs.launchpad.net/ubuntu/+bug/620609/
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This device has been reported to be an hid-cando one.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Added support for the 'Sensing Win7-TwoFinger' panel by GeneralTouch found on some tablets.
Because of conflicting VID/PID, this conflicts with previous support for some
single-touch panels by GeneralTouch
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Stéphane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Added support for Cypress TrueTouch panels, which detect up to 10 fingers
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Stéphane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Created a driver for PixCir based dual-touch panels, including the one
in the Hanvon tablet. This is done in a code structure aimed at unifying
support for several existing HID multitouch panels.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Stéphane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently hid doesn't export the features it knows to the specific modules.
Some information can be really important in such features: MosArt and
Cypress devices are by default not in a multitouch mode.
We have to send the value 2 on the right feature.
This patch exports to the module the features report so they can find the
right feature to set up the correct mode.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (34 commits)
HID: roccat: Update sysfs attribute doc
HID: roccat: don't use #pragma pack
HID: roccat: Add support for Roccat Kone[+] v2
HID: roccat: reduce number of functions in kone and pyra drivers
HID: roccat: declare meaning of pack pragma usage in driver headers
HID: roccat: use class for char device for sysfs attribute creation
sysfs: Introducing binary attributes for struct class
HID: hidraw: add compatibility ioctl() for 32-bit applications.
HID: hid-picolcd: Fix memory leak in picolcd_debug_out_report()
HID: picolcd: fix misuse of logical operation in place of bitop
HID: usbhid: base runtime PM on modern API
HID: replace offsets values with their corresponding BTN_* defines
HID: hid-mosart: support suspend/resume
HID: hid-mosart: ignore buttons report
HID: hid-picolcd: don't use flush_scheduled_work()
HID: simplify an index check in hid_lookup_collection
HID: Hoist assigns from ifs
HID: Remove superfluous __inline__
HID: Use vzalloc for vmalloc/memset(,0...)
HID: Add and use hid_<level>: dev_<level> equivalents
...
This patch adds support for Roccat Kone[+] gaming mouse. Kone[+] is an enhanced version
of the old Kone with more memory for macros, a better sensor and more functionality.
This driver is conceptual similar to the existing Kone and Pyra drivers.
Userland tools can soon be found at http://sourceforge.net/projects/roccat
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The profile number is now passed via bin_attribute->private instead
of function parameter to reduce number of functions.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Using pack pragma to prevent padding bytes in binary data structures
used for hardware communication. Explanation of these pragmas was requested.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Adding sysfs attributes to an already created device raises no userland
notification. Now the device drivers associate the devices attributes
with a class and use this for roccat event char device creation.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (58 commits)
Input: wacom_w8001 - support pen or touch only devices
Input: wacom_w8001 - use __set_bit to set keybits
Input: bu21013_ts - fix misuse of logical operation in place of bitop
Input: i8042 - add Acer Aspire 5100 to the Dritek list
Input: wacom - add support for digitizer in Lenovo W700
Input: psmouse - disable the synaptics extension on OLPC machines
Input: psmouse - fix up Synaptics comment
Input: synaptics - ignore bogus mt packet
Input: synaptics - add multi-finger and semi-mt support
Input: synaptics - report clickpad property
input: mt: Document interface updates
Input: fix double equality sign in uevent
Input: introduce device properties
hid: egalax: Add support for Wetab (726b)
Input: include MT library as source for kerneldoc
MAINTAINERS: Update input-mt entry
hid: egalax: Add support for Samsung NB30 netbook
hid: egalax: Document the new devices in Kconfig
hid: egalax: Add support for Wetab
hid: egalax: Convert to MT slots
...
Fixed up trivial conflict in drivers/input/keyboard/Kconfig
Added the ioctl function to the compat_ioctl pointer in the file_operations
struct. Before this, some ioctls would fail for 32-bit apps on 64-bit systems.
Signed-off-by: Alan Ott <alan@signal11.us>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We have a memory leak in drivers/hid/hid-picolcd.c::picolcd_debug_out_report()
in an error path.. We are not always freeing the memory allocated to
'buff' - this patch makes sure we always kfree() what we allocate with
kmalloc() when it is no longer needed.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch doesn't alter functionality, but removes a dedicated kernel
thread.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Tested-by: Maulik Mankad <x0082077@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
So far the USBLED driver only supports Delcom's "USB Visual Signal
Indicator" (http://www.delcomproducts.com/products_USBLMP.asp). The
driver generates virtual files "red", "green", and "blue" under the
device's /sys/ directory, where color values can be read from and
written to.
This patch adds support for Dream Cheeky's "DL100B Webmail Notifier"
(http://www.dreamcheeky.com/webmail-notifier -- available from several
shops, such as http://www.conrad.at/ce/de/product/777048/USB-WEBMAIL).
This device isn't as pretty as Delcom's, but it's *far* cheaper, and
its 3 LEDs can be set in 32 brightness steps each. The grey envelope
contour can easily be removed, leaving a rather neutral white box (with
a few small holes), which is useful for generic signalling purposes.
Of course, the small circuit board can easily be put into a prettier
case.
The DL100B device pretends to be a HID, but the HID descriptor shows
that it's not overly useful as such (see below). The patch therefore
removes the "HID-ness" (hid-core.c, hid-ids.h), and adds the necessary
commands to usbled.c. The protocol info comes from the developer's
manual that Dream Cheeky kindly provided (815DeveloperManual.pdf).
HID descriptor:
0: 05 01 Usage Page 'Generic Desktop Controls'
2: 09 10 Usage 'Reserved'
4: a1 01 Collection 'Application (mouse, keyboard)'
6: 05 00 Usage Page 'Undefined'
8: 19 10 Usage Minimum = 16
10: 29 11 Usage Maximum = 17
12: 15 00 Logical Minimum = 0
14: 25 0f Logical Maximum = 15
16: 75 08 Report Size = 8
18: 95 08 Report Count = 8
20: 91 02 Output data *var abs lin pref-state null-pos non-vol bit-field
22: 19 10 Usage Minimum = 16
24: 29 11 Usage Maximum = 17
26: 15 00 Logical Minimum = 0
28: 25 0f Logical Maximum = 15
30: 75 08 Report Size = 8
32: 95 08 Report Count = 8
34: 81 00 Input data array abs lin pref-state null-pos non-vol bit-field
36: c0 End Collection
Signed-off-by: Melchior FRANZ <mfranz@aon.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds support for another Wetab device (726b), and grabs it
accordingly in hid-core.
[rydberg@euromail.se: rename and log message changes]
Signed-off-by: Andy Ross <andy@plausible.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
The Samsung NB30 touch has a DWAV dual-touch device. This patch adds
the NB30 to the list of supported devices, and grabs it accordingly in
hid-core.
[rydberg@euromail.se: rename and log message changes]
Signed-off-by: Richard Nauber <Richard.Nauber@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Add the new supported devices to the kernel menu config help text.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
The Wetab tablet dual-touch controller works the same way as the one
in the Joojoo tablet. This patch adds the Wetab to the list of
supported devices, and grabs it accordingly in hid-core.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
The firmware in the joojoo reports touches sequentially, one per
report, which confuses the current driver. A further complication is
the absense of any indication of a touch frame. This patch converts
the driver to the MT slots protocol, and outputs one full touch frame
per report. This way, proper handling for both firmwares is ensured.
Tested-by: Philipp Merkel <mail@philmerk.de>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Use estimated signal-to-noise ratios to reduce noise and limit the
amount of events emitted.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
The firmware reports a logical minimum of one, but in order for
userspace applications to correctly map all reported values to
non-zero pressure, the driver needs to report a logical minimum of
zero. Fixed with this patch.
Tested-by: Philipp Merkel <mail@philmerk.de>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
The firmware of both supported devices report a X/Y maximum of 4095,
whereas in reality, it is eight times larger. Fixed with this patch.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
The hid core does not yet handle input filtering. Take over the setup
of the input device, so that proper signal-to-noise ratios can be
used.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
The drivers using the type B protocol all report tracking information
the same way. The contact id is semantically equivalent to
ABS_MT_SLOT, and the handling of ABS_MT_TRACKING_ID only complicates
the driver. The situation can be improved upon by providing a common
pointer emulation code, thereby removing the need for the tracking id
in the driver. This patch moves all tracking event handling over to
the input core, simplifying both the existing drivers and the ones
currently in preparation.
Acked-by: Ping Cheng <pingc@wacom.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
The MT slots devices all follow the same initialization pattern
of creating slots and hinting about buffer size. Let drivers call
an initialization function instead, and make sure it can be called
repeatedly without side effects.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
In preparation for common code to handle a larger set of MT slots
devices, move the slots handling over to a separate file.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Instead of using magic values, use their corresponding BTN_* defines
from linux/input.h.
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The device has 2 modes. The first one is an emulation of a touchscreen
by sending left and right button, and the second mode is the one used in
dual-touch (sending trackingID, touch and else).
In case of a suspend/resume, the device switch back to the first mode
described above (with left and right buttons).
This adds a hook in .reset_resume for the device to be switched to
the correct mode (I just copied the code in mosart_probe).
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit allows the device to be recognized as a touchscreen, and not a
touchpad by xf86-input-evdev.
The device has 2 modes. The first one is an emulation of a touchscreen by
sending left and right button, and the second mode is the one used in
dual-touch (sending trackingID, touch and else).
That's why there is a hid report containing left and right buttons
(9000001 and 9000002). The point is that xorg relies on these fields to
determine if it's a touchpad or a touchscreen.
Clearing the report (return -1) makes xorg detecting it out of the box
as a quite pleasant (dual)touchscreen.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Save the struct hid_collection * in a temporary to shorten
the generated code a bit and perhaps improve readability.
$ size drivers/hid/hid-core.o*
text data bss dec hex filename
16460 78 8 16546 40a2 drivers/hid/hid-core.o.new
16469 78 8 16555 40ab drivers/hid/hid-core.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Neaten current uses of dev_<level> by adding and using
hid specific hid_<level> macros.
Convert existing uses of dev_<level> uses to hid_<level>.
Convert hid-pidff printk uses to hid_<level>.
Remove err_hid and use hid_err instead.
Add missing newlines to logging messages where necessary.
Coalesce format strings.
Add and use pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Other miscellaneous changes:
Add const struct hid_device * argument to hid-core functions
extract() and implement() so hid_<level> can be used by them.
Fix bad indentation in hid-core hid_input_field function
that calls extract() function above.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
With the recent switch to having the hid layer handle standard axis
initialization, the Magic Trackpad now reports relative axes. This would
be fine in the normal mode, but the driver puts the device in multitouch
mode where no relative events are generated. Also, userspace software
depends on accurate axis information for device type detection. Thus,
ignoring the relative axes from the Magic Trackpad is best.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Instead of exposing the guts of hid->ll_driver relationship to HID
sub-drivers provide these helpers to encapsulate the details.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently, if the device has been removed before hiddev_ioctl(),
the -EIO is returned. If it's removed while hiddev_ioctl() is in
progress, some commands are still processed fine, others
return -ENODEV. This change takes the "existancelock" before
processing ioctl commands and releases it at the end.
If the device has been removed, always returns -ENODEV.
Signed-off-by: Valentine Barshak <vbarshak@mvista.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A USB HID device can be disconnected at any time.
If this happens right before or while hiddev_ioctl is in progress,
the hiddev_ioctl tries to access invalid hiddev->hid pointer.
When the hid device is disconnected, the hiddev_disconnect()
ends up with a call to hid_device_release() which frees
hid_device, but doesn't set the hiddev->hid pointer to NULL.
If the deallocated memory region has been re-used by the kernel,
this can cause a crash or memory corruption.
Since disconnect can happen at any time, we can't initialize
struct hid_device *hid = hiddev->hid at the beginning of ioctl
and then use it.
This change checks hiddev->exist flag while holding
the existancelock and uses hid_device only if it exists.
Signed-off-by: Valentine Barshak <vbarshak@mvista.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: length resolution should be reported units/mm
HID: add support for F430 Force Feedback Wheel
HID: egalax: Use kzalloc
HID: Remove KERN_DEBUG from dbg_hid use
Manually fixed trivial conflict in drivers/hid/hid-input.c (due to
removal of KERN_DEBUG from dbg_hid use clashing with new keycode
interface switch)
Input ABI requires reporting resolution on main axes in units per
millimeter, not units per inch, so we need to convert accordingly.
Tested-by: Nikolai Kondrashov <spbnick@gmail.com>
Acked-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds USB IDs to enable force feedback on the Thrustmaster
F430 wheel.
Antonio did the work, I just converted to git patch to include in Kernel.
Reported-by: Antonio Orefice <aorefice77@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
To avoid confusion with hid_blacklist describing various quirks in
usbhid code, let's rename this one.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for the media keys of the Perixx PERIBOARD-707 (Plus)
keyboard / remote control.
Signed-off-by: Dennis Kügler <dennis.kuegler@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It's not really dangerous in this driver, but it's against general
practice and worth fixing.
Wacom uses the attribute for changing the reporting speed of the
tablet (and this actually requires poking the device in the
background) (still I wouldn't consider it a security issue though).
udev is a proper place to handle this.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It's not really dangerous in this driver, but it's against general
practice and worth fixing.
Proper place for handling this correctly is udev.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is
deprecated and should now be switched. According to (documentation/kbuild/makefiles.txt).
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is
deprecated and should now be switched. According to (documentation/kbuild/makefiles.txt).
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.
Remove this too as a cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reshuffle the code a little bit so that the translation table selection
is more obvious and there is only one place performing the actual
translation using the selected table.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch add support for the MacBookAir3,1 and MacBookAir3,2 to the hid
driver.
Signed-off-by: Edgar (gimli) Hucek <gimli@dark-green.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The device has connections for GameCube, PlayStation 2 and Dreamcast
controllers, however Force Feedback is only supported for PS2 and GC
controllers.
When using a PS2 controller it may be necessary to press the "Analog" button to
enable support for both motors (this behavior is identical to the Windows
driver, I have found no way to avoid that).
Signed-off-by: Ignaz Forster <ignaz.forster@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (141 commits)
USB: mct_u232: fix broken close
USB: gadget: amd5536udc.c: fix error path
USB: imx21-hcd - fix off by one resource size calculation
usb: gadget: fix Kconfig warning
usb: r8a66597-udc: Add processing when USB was removed.
mxc_udc: add workaround for ENGcm09152 for i.MX35
USB: ftdi_sio: add device ids for ScienceScope
USB: musb: AM35x: Workaround for fifo read issue
USB: musb: add musb support for AM35x
USB: AM35x: Add musb support
usb: Fix linker errors with CONFIG_PM=n
USB: ohci-sh - use resource_size instead of defining its own resource_len macro
USB: isp1362-hcd - use resource_size instead of defining its own resource_len macro
USB: isp116x-hcd - use resource_size instead of defining its own resource_len macro
USB: xhci: Fix compile error when CONFIG_PM=n
USB: accept some invalid ep0-maxpacket values
USB: xHCI: PCI power management implementation
USB: xHCI: bus power management implementation
USB: xHCI: port remote wakeup implementation
USB: xHCI: port power management implementation
...
Manually fix up (non-data) conflict: the SCSI merge gad renamed the
'hw_sector_size' member to 'physical_block_size', and the USB tree
brought a new use of it.
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
vfs: make no_llseek the default
vfs: don't use BKL in default_llseek
llseek: automatically add .llseek fop
libfs: use generic_file_llseek for simple_attr
mac80211: disallow seeks in minstrel debug code
lirc: make chardev nonseekable
viotape: use noop_llseek
raw: use explicit llseek file operations
ibmasmfs: use generic_file_llseek
spufs: use llseek in all file operations
arm/omap: use generic_file_llseek in iommu_debug
lkdtm: use generic_file_llseek in debugfs
net/wireless: use generic_file_llseek in debugfs
drm: use noop_llseek
Meywa-Denki/Kayac YUREX is a leg-shakes sensor device.
See http://bbu.kayac.com/en/about/ for further information.
This driver support read/write the leg-shakes counter in the device
via a device file /dev/yurex[0-9]*.
[minor coding style cleanups fixed by gregkh]
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is a window between hidraw_table check and its dereference.
In that window, the device may be unplugged and removed form the
system and we will then dereference NULL.
Lock that place properly so that either we get NULL and jump out or we
can work with real pointer.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Override usbhid_output_raw_report in order to force output reports (sent
via hidraw_write, for instance) on the control endpoint.
The Sony Sixaxis (PS3 Controller) accepts output reports only on the
control endpoint, it silently discards them when they arrive over the
interrupt endpoint where usbhid would normally deliver them.
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add absolute axis resolution calculation to the core HID layer, according to HID
specification v1.11 6.2.2.7 Global Items. Only exponent 1 length units for
X/Y/Z/RX/RY/RZ axis are supported for now.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.
The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.
New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time. Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.
The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.
Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.
Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.
===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
// but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}
@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}
@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}
@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}
@ fops0 @
identifier fops;
@@
struct file_operations fops = {
...
};
@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
.llseek = llseek_f,
...
};
@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
.read = read_f,
...
};
@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
.write = write_f,
...
};
@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
.open = open_f,
...
};
// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
... .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};
@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
... .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};
// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
... .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};
// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};
// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};
@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+ .llseek = default_llseek, /* write accesses f_pos */
};
// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////
@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
.write = write_f,
.read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};
@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};
@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};
@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
This add the product id of the touch screen found on ACER Aspire 5738PZ. Works
with hid-cando driver.
Signed-off-by: Francois Jaouen<francois.jaouen@laposte.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>