Commit Graph

18 Commits

Author SHA1 Message Date
Chanwoo Choi 96ffcdf239 PM / devfreq: Remove redundant governor_name from struct devfreq
The devfreq structure instance contains the governor_name and a governor
instance. When need to show the governor name, better to use the name
of devfreq_governor structure. So, governor_name variable in struct devfreq
is a redundant and unneeded variable. Remove the redundant governor_name
of struct devfreq and then use the name of devfreq_governor instance.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-10-26 11:50:51 +09:00
Chanwoo Choi 5f1a9066fc PM / devfreq: Add governor attribute flag for specifc sysfs nodes
DEVFREQ supports the default governors like performance, simple_ondemand and
also allows the devfreq driver to add their own governor like tegra30-devfreq.c
according to their requirement. In result, some sysfs attributes are useful
or not useful. Prior to that the user can access all sysfs attributes
regardless of the available attributes.

So, clarify the access permission of sysfs attributes according to governor.
When adding the devfreq governor, can specify the available attribute
information by using DEVFREQ_GOV_ATTR_* constant variable. The user can
read or write the sysfs attributes in accordance to the specified attributes.

When adding the governor, can add the following attributes
according to the governor feature.

[Definition for speific sysfs attributes]
- DEVFREQ_GOV_ATTR_POLLING_INTERVAL to update polling interval for timer.
  : /sys/class/devfreq/[devfreq dev name]/polling_interval
- DEVFREQ_GOV_ATTR_TIMER to change the type of timer on either deferrable
  or dealyed timer.
  : /sys/class/devfreq/[devfreq dev name]/timer

And all devfreq governors have to support the following common attributes.
The common attributes are added to devfreq class by default.
- governor
- available_governors
- available_frequencies
- cur_freq
- target_freq
- min_freq
- max_freq
- trans_stat

[Table of governor attribute flags for devfreq governors]
------------------------------------------------------------------------------
                      | simple    | perfor | power | user | passive | tegra30
		      | ondemand  | mance  | save  | space|         |
------------------------------------------------------------------------------
governor              | O         | O      | O     | O    | O       | O
available_governors   | O         | O      | O     | O    | O       | O
available_frequencies | O         | O      | O     | O    | O       | O
cur_freq              | O         | O      | O     | O    | O       | O
target_freq           | O         | O      | O     | O    | O       | O
min_freq              | O         | O      | O     | O    | O       | O
max_freq              | O         | O      | O     | O    | O       | O
trans_stat            | O         | O      | O     | O    | O       | O
                      --------------------------------------------------------
polling_interval      | O         | X      | X     | X    | X       | O
timer                 | O         | X      | X     | X    | X       | X
------------------------------------------------------------------------------

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-10-26 11:46:54 +09:00
Chanwoo Choi 0dd25a0d12 PM / devfreq: Add governor feature flag
The devfreq governor is able to have the specific flag as follows
in order to implement the specific feature. For example, devfreq allows
user to change the governors on runtime via sysfs interface.
But, if devfreq device uses 'passive' governor, don't allow user to change
the governor. For this case, define the DEVFREQ_GOV_FLAG_IMMUTABLE
and set it to flag of passive governor.

[Definition for governor flag]
- DEVFREQ_GOV_FLAG_IMMUTABLE
  : If immutable flag is set, governor is never changeable to other governors.
- DEVFREQ_GOV_FLAG_IRQ_DRIVEN
  : Devfreq core won't schedule polling work for this governor if value is set.

[Table of governor flag for devfreq governors]
------------------------------------------------------------------------------
                      | simple    | perfor | power | user | passive | tegra30
		      | ondemand  | mance  | save  | space|         |
------------------------------------------------------------------------------
immutable             | X         | X      | X     | X    | O       | O
interrupt_driven      | X(polling)| X      | X     | X    | X       | O (irq)
------------------------------------------------------------------------------

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-10-26 10:54:41 +09:00
Chanwoo Choi b4365423bb PM / devfreq: Unify frequency change to devfreq_update_target func
The update_devfreq() and update_passive_devfreq() have the duplicate
code when changing the target frequency on final stage. So, unify
frequency change code to devfreq_update_target() to remove the
duplicate code and to centralize the frequency change code.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-10-26 10:52:37 +09:00
Christophe JAILLET 3bb5ee9aaa PM / devfreq: Fix a typo in a comment
'govenror' was used in place of 'governor'

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-03-25 08:35:03 +09:00
Chanwoo Choi 3a1ec2e8d8 PM / devfreq: Change to DEVFREQ_GOV_UPDATE_INTERVAL event name
DEVFREQ_GOV_INTERVAL event indicates that update the interval
for polling mode of devfreq device. But, this event name doesn't
specify exactly what to do.

Change DEVFREQ_GOV_INTERVAL event name to DEVFREQ_GOV_UPDATE_INTERVAL
which specifies what to do by event name.

And modify the function name to DEVFREQ_GOV_UPDATE_INTERVAL
with 'devfreq_' prefix + verb + object as following:
- devfreq_interval_update -> devfreq_updatee_interval

Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-03-25 08:35:03 +09:00
Chanwoo Choi 6d7434931a PM / devfreq: Remove unneeded extern keyword
Remove unneeded extern keyword from devfreq-related header file
and adjust the indentation of function parameter to keep the
consistency in header file

Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-03-25 08:35:03 +09:00
Dmitry Osipenko 5c0f6c7959 PM / devfreq: Add new interrupt_driven flag for governors
Currently interrupt-driven governors (like NVIDIA Tegra30 ACTMON governor)
are used to set polling_ms=0 in order to avoid periodic polling of device
status by devfreq core. This means that polling interval can't be changed
by userspace for such governors.

The new governor flag allows interrupt-driven governors to convey that
devfreq core shouldn't perform polling of device status and thus generic
devfreq polling interval could be supported by these governors now.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-11-06 12:04:01 +09:00
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Matthias Kaehlcke b596d895fa PM / devfreq: Make update_devfreq() public
Currently update_devfreq() is only visible to devfreq governors outside
of devfreq.c. Make it public to allow drivers that adjust devfreq policies
to cause a re-evaluation of the frequency after a policy change.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-10-02 10:16:41 +09:00
Matthias Kaehlcke 6ff66e2a00 PM / devfreq: Don't adjust to user limits in governors
Several governors use the user space limits df->min/max_freq to adjust
the target frequency. This is not necessary, since update_devfreq()
already takes care of this. Instead the governor can request the available
min/max frequency by setting the target frequency to DEVFREQ_MIN/MAX_FREQ
and let update_devfreq() take care of any adjustments.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-10-02 10:16:41 +09:00
Chanwoo Choi f75b0afa19 PM / devfreq: Move private devfreq_update_stats() into devfreq
THe devfreq_update_stats() updates the 'struct devfreq_dev_status'
in order to get current status of devfreq device. It is only used
for the governors.

This patch moves the devfreq_update_stats() into devfreq directory.

Signed-off-by: Chanwoo Choi <cwchoi00@gmail.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-08-28 10:22:27 +09:00
Chanwoo Choi 3ea6b7001e PM / devfreq: Move struct devfreq_governor to devfreq directory
This patch moves the struct devfreq_governor from header file
to the devfreq directory because this structure is private data
and it have to be only accessed by the devfreq core.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-04-12 12:42:14 +09:00
Chanwoo Choi 30582c25a4 PM / devfreq: Fix wrong trans_stat of passive devfreq device
Until now, the trans_stat information of passive devfreq is not updated.
This patch updates the trans_stat information after setting the target
frequency of passive devfreq device.

Fixes: 996133119f ("PM / devfreq: Add new passive governor")
Cc: stable@vger.kernel.org
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31 15:47:32 +09:00
Nishanth Menon 3aa173b8db PM / devfreq: provide hooks for governors to be registered
Add devfreq_add_governor and devfreq_remove_governor which
can be invoked by governors to register with devfreq.

This sets up the stage to dynamically switch governors and
allow governors to be dynamically loaded as well.

Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Kevin Hilman <khilman@ti.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2012-11-20 18:46:12 +09:00
Rajagopal Venkat 206c30cfeb PM / devfreq: Add suspend and resume apis
Add devfreq suspend/resume apis for devfreq users. This patch
supports suspend and resume of devfreq load monitoring, required
for devices which can idle.

Signed-off-by: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:35:04 +01:00
Rajagopal Venkat 7e6fdd4bad PM / devfreq: Core updates to support devices which can idle
Prepare devfreq core framework to support devices which
can idle. When device idleness is detected perhaps through
runtime-pm, need some mechanism to suspend devfreq load
monitoring and resume back when device is online. Present
code continues monitoring unless device is removed from
devfreq core.

This patch introduces following design changes,

 - use per device work instead of global work to monitor device
   load. This enables suspend/resume of device devfreq and
   reduces monitoring code complexity.
 - decouple delayed work based load monitoring logic from core
   by introducing helpers functions to be used by governors. This
   provides flexibility for governors either to use delayed work
   based monitoring functions or to implement their own mechanism.
 - devfreq core interacts with governors via events to perform
   specific actions. These events include start/stop devfreq.
   This sets ground for adding suspend/resume events.

The devfreq apis are not modified and are kept intact.

Signed-off-by: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:35:04 +01:00
MyungJoo Ham a3c98b8b2e PM: Introduce devfreq: generic DVFS framework with device-specific OPPs
With OPPs, a device may have multiple operable frequency and voltage
sets. However, there can be multiple possible operable sets and a system
will need to choose one from them. In order to reduce the power
consumption (by reducing frequency and voltage) without affecting the
performance too much, a Dynamic Voltage and Frequency Scaling (DVFS)
scheme may be used.

This patch introduces the DVFS capability to non-CPU devices with OPPs.
DVFS is a techique whereby the frequency and supplied voltage of a
device is adjusted on-the-fly. DVFS usually sets the frequency as low
as possible with given conditions (such as QoS assurance) and adjusts
voltage according to the chosen frequency in order to reduce power
consumption and heat dissipation.

The generic DVFS for devices, devfreq, may appear quite similar with
/drivers/cpufreq.  However, cpufreq does not allow to have multiple
devices registered and is not suitable to have multiple heterogenous
devices with different (but simple) governors.

Normally, DVFS mechanism controls frequency based on the demand for
the device, and then, chooses voltage based on the chosen frequency.
devfreq also controls the frequency based on the governor's frequency
recommendation and let OPP pick up the pair of frequency and voltage
based on the recommended frequency. Then, the chosen OPP is passed to
device driver's "target" callback.

When PM QoS is going to be used with the devfreq device, the device
driver should enable OPPs that are appropriate with the current PM QoS
requests. In order to do so, the device driver may call opp_enable and
opp_disable at the notifier callback of PM QoS so that PM QoS's
update_target() call enables the appropriate OPPs. Note that at least
one of OPPs should be enabled at any time; be careful when there is a
transition.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Mike Turquette <mturquette@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-02 00:19:15 +02:00