With kernel now supporting new pmem flush/sync instructions, we can now
enable the kernel to initialize the device. On P10 these devices would
appear with a new compatible string. For PAPR device we have
compatible "ibm,pmemory-v2"
and for OF pmem device we have
compatible "pmem-region-v2"
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-8-aneesh.kumar@linux.ibm.com
nvdimm expect the flush routines to just mark the cache clean. The barrier
that mark the store globally visible is done in nvdimm_flush().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-7-aneesh.kumar@linux.ibm.com
pmem on POWER10 can now use phwsync instead of hwsync to ensure
all previous writes are architecturally visible for the platform
buffer flush.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-6-aneesh.kumar@linux.ibm.com
Architectures like ppc64 provide persistent memory specific barriers
that will ensure that all stores for which the modifications are
written to persistent storage by preceding dcbfps and dcbstps
instructions have updated persistent storage before any data
access or data transfer caused by subsequent instructions is initiated.
This is in addition to the ordering done by wmb()
Update nvdimm core such that architecture can use barriers other than
wmb to ensure all previous writes are architecturally visible for
the platform buffer flush.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-5-aneesh.kumar@linux.ibm.com
Start using dcbstps; phwsync; sequence for flushing persistent memory range.
The new instructions are implemented as a variant of dcbf and hwsync and on
P8 and P9 they will be executed as those instructions. We avoid using them on
older hardware. This helps to avoid difficult to debug bugs.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-4-aneesh.kumar@linux.ibm.com
POWER10 introduces two new variants of dcbf instructions (dcbstps and dcbfps)
that can be used to write modified locations back to persistent storage.
Additionally, POWER10 also introduce phwsync and plwsync which can be used
to establish order of these writes to persistent storage.
This patch exposes these instructions to the rest of the kernel. The existing
dcbf and hwsync instructions in P8 and P9 are adequate to enable appropriate
synchronization with OpenCAPI-hosted persistent storage. Hence the new
instructions are added as a variant of the old ones that old hardware
won't differentiate.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-3-aneesh.kumar@linux.ibm.com
The PAPR based virtualized persistent memory devices are only supported on
POWER9 and above. In the followup patch, the kernel will switch the persistent
memory cache flush functions to use a new `dcbf` variant instruction. The new
instructions even though added in ISA 3.1 works even on P8 and P9 because these
are implemented as a variant of existing `dcbf` and `hwsync` and on P8 and
P9 behaves as such.
Considering these devices are only supported on P8 and above, update the driver
to prevent a P7-compat guest from using persistent memory devices.
We don't update of_pmem driver with the same condition, because, on bare-metal,
the firmware enables pmem support only on P9 and above. There the kernel depends
on OPAL firmware to restrict exposing persistent memory related device tree
entries on older hardware. of_pmem.ko is written without any arch dependency and
we don't want to add ppc64 specific cpu feature check in of_pmem driver.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-2-aneesh.kumar@linux.ibm.com
When platform doesn't support GTSE, let TLB invalidation requests
for radix guests be off-loaded to the host using H_RPT_INVALIDATE
hcall.
[hcall wrapper, error path handling and renames]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703053608.12884-4-bharata@linux.ibm.com
H_REGISTER_PROC_TBL asks for GTSE by default. GTSE flag bit should
be set only when GTSE is supported.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703053608.12884-3-bharata@linux.ibm.com
Make GTSE an MMU feature and enable it by default for radix.
However for guest, conditionally enable it if hypervisor supports
it via OV5 vector. Let prom_init ask for radix GTSE only if the
support exists.
Having GTSE as an MMU feature will make it easy to enable radix
without GTSE. Currently radix assumes GTSE is enabled by default.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703053608.12884-2-bharata@linux.ibm.com
ERR_NX_TRANSLATION(CSB.CC=5) is for internal to VAS for fault handling
and should not used by OS. ERR_NX_AT_FAULT(CSB.CC=250) is the proper
error code should be reported by OS when NX encounters address
translation failure.
This patch uses CC=250 to determine the fault address when the request
is not successful.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0315251705baff94f678c33178491b5008723511.camel@linux.ibm.com
P9 DD2 NX workbook (Table 4-36) says DMA controller uses CC=5
internally for translation fault handling. NX reserves CC=250 for
OS to notify user space when NX encounters address translation
failure on the request buffer. Not an issue in earlier releases
as NX does not get faults on kernel addresses.
This patch defines CSB_CC_FAULT_ADDRESS(250) and updates CSB.CC with
this proper error code for user space.
Fixes: c96c4436ab ("powerpc/vas: Update CSB and notify process for fault CRBs")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Added Fixes tag and fix typo in comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/019fd53e7538c6f8f332d175df74b1815ef5aa8c.camel@linux.ibm.com
save_general_regs() which does special handling when i == PT_SOFTE.
Rewrite it to minimise the specific part, especially the __put_user()
and associated error handling is the same so make it common.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Use a regular if rather than ternary operator]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/47a38df46cae5a5a88a558a64d71f75e9c4d9950.1594125164.git.christophe.leroy@csgroup.eu
Since commit ("1bd79336a426 powerpc: Fix various
syscall/signal/swapcontext bugs"), getting save_general_regs() called
without FULL_REGS() is very unlikely and generates a warning.
The 32-bit version of save_general_regs() doesn't take care of it
at all and copies all registers anyway since that commit.
Moreover, commit 965dd3ad30 ("powerpc/64/syscall: Remove
non-volatile GPR save optimisation") is another reason why it would
never happen.
So the same with 64-bit, don't worry about FULL_REGS() and copy
all registers all the time.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/173de3b659fa3a5f126a0eb170522cccd909950f.1594125164.git.christophe.leroy@csgroup.eu
Documentation wrongly tells that book3s/32 CPU have hash MMU.
603 and e300 core only have software loaded TLB.
755, 7450 family and e600 core have both hash MMU and software loaded
TLB. This can be selected by setting a bit in HID2 (755) or
HID0 (others). At the time being this is not supported by the kernel.
Make this explicit in the documentation.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/261923c075d1cb49d02493685e8585d4ea2a5197.1593698951.git.christophe.leroy@csgroup.eu
Returning from an interrupt or syscall to a signal handler currently
begins execution directly at the handler's entry point, with LR set to
the address of the sigreturn trampoline. When the signal handler
function returns, it runs the trampoline. It looks like this:
# interrupt at user address xyz
# kernel stuff... signal is raised
rfid
# void handler(int sig)
addis 2,12,.TOC.-.LCF0@ha
addi 2,2,.TOC.-.LCF0@l
mflr 0
std 0,16(1)
stdu 1,-96(1)
# handler stuff
ld 0,16(1)
mtlr 0
blr
# __kernel_sigtramp_rt64
addi r1,r1,__SIGNAL_FRAMESIZE
li r0,__NR_rt_sigreturn
sc
# kernel executes rt_sigreturn
rfid
# back to user address xyz
Note the blr with no matching bl. This can corrupt the return
predictor.
Solve this by instead resuming execution at the signal trampoline
which then calls the signal handler. qtrace-tools link_stack checker
confirms the entire user/kernel/vdso cycle is balanced after this
patch, whereas it's not upstream.
Alan confirms the dwarf unwind info still looks good. gdb still
recognises the signal frame and can step into parent frames if it
break inside a signal handler.
Performance is pretty noisy, not a very significant change on a POWER9
here, but branch misses are consistently a lot lower on a
microbenchmark:
Performance counter stats for './signal':
13,085.72 msec task-clock # 1.000 CPUs utilized
45,024,760,101 cycles # 3.441 GHz
65,102,895,542 instructions # 1.45 insn per cycle
11,271,673,787 branches # 861.372 M/sec
59,468,979 branch-misses # 0.53% of all branches
12,989.09 msec task-clock # 1.000 CPUs utilized
44,692,719,559 cycles # 3.441 GHz
65,109,984,964 instructions # 1.46 insn per cycle
11,282,136,057 branches # 868.585 M/sec
39,786,942 branch-misses # 0.35% of all branches
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200511101952.1463138-1-npiggin@gmail.com
The kernel test robot pointed out a slightly different error message
after recent commit 5456ffdee6 ("powerpc/spufs: simplify spufs core
dumping") to spufs for a configuration that never worked:
powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_proxydma_info_dump':
>> file.c:(.text+0x4c68): undefined reference to `.dump_emit'
powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_dma_info_dump':
file.c:(.text+0x4d70): undefined reference to `.dump_emit'
powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_wbox_info_dump':
file.c:(.text+0x4df4): undefined reference to `.dump_emit'
Add a Kconfig dependency to prevent this from happening again.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200706132302.3885935-1-arnd@arndb.de
pnv_ioda_setup_bus_dma() is only used when a passed through PE is
returned to the host. If the kernel is built without IOMMU support
this is dead code. Move it under the #ifdef with the rest of the
IOMMU API support.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200705133557.443607-2-oohall@gmail.com
The kernel test robot noticed these are non-static which causes Clang to
print some warnings. These are called via ppc_md function pointers so
there's no need for them to be non-static.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200705133557.443607-1-oohall@gmail.com
Unlike drivers/base/cacheinfo, powerpc cacheinfo code is not exposing
shared_cpu_list under /sys/devices/system/cpu/cpu<n>/cache/index<m>
Add shared_cpu_list to per cpu per index directory to maintain parity
with x86. Some scripts (example: mmtests
https://github.com/gormanm/mmtests) seem to be looking for
shared_cpu_list instead of shared_cpu_map.
Before this patch:
# ls /sys/devices/system/cpu0/cache/index1
coherency_line_size number_of_sets size ways_of_associativity
level shared_cpu_map type
# cat /sys/devices/system/cpu0/cache/index1/shared_cpu_map
00ff
#
After this patch:
# ls /sys/devices/system/cpu0/cache/index1
coherency_line_size number_of_sets shared_cpu_map type
level shared_cpu_list size ways_of_associativity
# cat /sys/devices/system/cpu0/cache/index1/shared_cpu_map
00ff
# cat /sys/devices/system/cpu0/cache/index1/shared_cpu_list
0-7
#
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200629103703.4538-4-srikar@linux.vnet.ibm.com
In anticipation of implementing shared_cpu_list, move code under
shared_cpu_map_show() to a common function.
No functional changes.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200629103703.4538-3-srikar@linux.vnet.ibm.com
Tejun Heo had modified shared_cpu_map_show() to use scnprintf instead
of cpumap_print during support for *pb[l] format. Refer commit
0c118b7bd0 ("powerpc: use %*pb[l] to print bitmaps including
cpumasks and nodemasks").
cpumap_print_to_pagebuf() is a standard function to print cpumap. With
commit 9cf79d115f ("bitmap: remove explicit newline handling using
scnprintf format string"), there is no need to print explicit newline
and trailing null character. cpumap_print_to_pagebuf() internally uses
scnprintf(). Hence replace scnprintf() with cpumap_print_to_pagebuf().
Note: shared_cpu_map_show() in drivers/base/cacheinfo.c already uses
cpumap_print_to_pagebuf().
Before this patch:
# cat /sys/devices/system/cpu0/cache/index1/shared_cpu_map
00ff
#
(Notice the extra blank line).
After this patch:
# cat /sys/devices/system/cpu0/cache/index1/shared_cpu_map
00ff
#
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200629103703.4538-2-srikar@linux.vnet.ibm.com
Some opencapi FPGA images allow to control if the FPGA should be reloaded
on the next adapter reset. If it is supported, the image specifies it
through a Vendor Specific DVSEC in the config space of function 0.
Signed-off-by: Philippe Bergheaud <felix@linux.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200619140439.153962-1-fbarrat@linux.ibm.com
I'm seeing RCU warnings when exiting xmon. xmon resets the NMI
watchdog, but does nothing with the RCU stall or soft lockup
watchdogs. Add a helper function that handles all three.
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200630100218.62a3c3fb@kryten.localdomain
Early secure guest boot hits the below crash while booting with
vcpus numbers aligned with page boundary for PAGE size of 64k
and LPPACA size of 1k i.e 64, 128 etc.
Partition configured for 64 cpus.
CPU maps initialized for 1 thread per core
------------[ cut here ]------------
kernel BUG at arch/powerpc/kernel/paca.c:89!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
This is due to the BUG_ON() for shared_lppaca_total_size equal to
shared_lppaca_size. Instead the code should only BUG_ON() if we have
exceeded the total_size, which indicates we've overflowed the array.
Fixes: bd104e6db6 ("powerpc/pseries/svm: Use shared memory for LPPACA structures")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
[mpe: Reword change log to clarify we're fixing not removing the check]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200619070113.16696-1-sathnaga@linux.vnet.ibm.com
An extra count on ebb_state.stats.pmc_count[PMC_INDEX(pmc)] is being per-
formed when count_pmc() is used to reset PMCs on a few selftests. This
extra pmc_count can occasionally invalidate results, such as the ones from
cycles_test shown hereafter. The ebb_check_count() failed with an above
the upper limit error due to the extra value on ebb_state.stats.pmc_count.
Furthermore, this extra count is also indicated by extra PMC1 trace_log on
the output of the cycle test (as well as on pmc56_overflow_test):
==========
...
[21]: counter = 8
[22]: register SPRN_MMCR0 = 0x0000000080000080
[23]: register SPRN_PMC1 = 0x0000000080000004
[24]: counter = 9
[25]: register SPRN_MMCR0 = 0x0000000080000080
[26]: register SPRN_PMC1 = 0x0000000080000004
[27]: counter = 10
[28]: register SPRN_MMCR0 = 0x0000000080000080
[29]: register SPRN_PMC1 = 0x0000000080000004
>> [30]: register SPRN_PMC1 = 0x000000004000051e
PMC1 count (0x280000546) above upper limit 0x2800003e8 (+0x15e)
[FAIL] Test FAILED on line 52
failure: cycles
==========
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200626164737.21943-1-desnesn@linux.ibm.com
A typo caused the interrupt handler to branch immediately to the
common "unknown interrupt" handler and skip the special case test for
denormal cause.
This does not affect KVM softpatch handling (e.g., for POWER9 TM
assist) because the KVM test was moved to common code by commit
9600f261ac ("powerpc/64s/exception: Move KVM test to common code")
just before this bug was introduced.
Fixes: 3f7fbd97d0 ("powerpc/64s/exception: Clean up SRR specifiers")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
[mpe: Split selftest into a separate patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200708074942.1713396-1-npiggin@gmail.com
With CONFIG_OF_ALL_DTBS=y, as set by eg. allmodconfig, we see lots of
warnings about our dts files, such as:
arch/powerpc/boot/dts/glacier.dts:492.26-532.5:
Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci"
or "pcie"
The node name should not particularly matter, it's just a name, and
AFAICS there's no kernel code that cares whether nodes are *named*
"pciex" or "pcie". So shutup these warnings by converting to the name
dtc wants.
As always there's some risk this could break something obscure that
does rely on the name, in which case we can revert.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200623130320.405852-1-mpe@ellerman.id.au
Clang warns:
arch/powerpc/boot/main.c:107:18: warning: array comparison always
evaluates to a constant [-Wtautological-compare]
if (_initrd_end > _initrd_start) {
^
arch/powerpc/boot/main.c:155:20: warning: array comparison always
evaluates to a constant [-Wtautological-compare]
if (_esm_blob_end <= _esm_blob_start)
^
2 warnings generated.
These are not true arrays, they are linker defined symbols, which are
just addresses. Using the address of operator silences the warning
and does not change the resulting assembly with either clang/ld.lld
or gcc/ld (tested with diff + objdump -Dr).
Reported-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624035920.835571-1-natechancellor@gmail.com
Apart from read and write access, memory protection keys can
also be used for restricting execute permission of pages on
powerpc. This adds a test to verify if the feature works as
expected.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200604125610.649668-4-sandipan@linux.ibm.com
The Power ISA mandates that all writes to the Authority
Mask Register (AMR) must always be preceded as well as
succeeded by a context synchronizing instruction.
This makes sure that the tests follow this requirement
when attempting to update a pkey's access rights.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200604125610.649668-2-sandipan@linux.ibm.com
Jan reported that LTP mmap03 was getting stuck in a page fault loop
after commit c46241a370 ("powerpc/pkeys: Check vma before returning
key fault error to the user"), as well as a minimised reproducer:
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/mman.h>
int main(int ac, char **av)
{
int page_sz = getpagesize();
int fildes;
char *addr;
fildes = open("tempfile", O_WRONLY | O_CREAT, 0666);
write(fildes, &fildes, sizeof(fildes));
close(fildes);
fildes = open("tempfile", O_RDONLY);
unlink("tempfile");
addr = mmap(0, page_sz, PROT_EXEC, MAP_FILE | MAP_PRIVATE, fildes, 0);
printf("%d\n", *addr);
return 0;
}
And noticed that access_pkey_error() in page fault handler now always
seem to return false:
__do_page_fault
access_pkey_error(is_pkey: 1, is_exec: 0, is_write: 0)
arch_vma_access_permitted
pkey_access_permitted
if (!is_pkey_enabled(pkey))
return true
return false
pkey_access_permitted() should not check if the pkey is available in
UAMOR (using is_pkey_enabled()). The kernel needs to do that check
only when allocating keys. This also makes sure the execute_only_key
which is marked as non-manageable via UAMOR is handled correctly in
pkey_access_permitted(), and fixes the bug.
Fixes: c46241a370 ("powerpc/pkeys: Check vma before returning key fault error to the user")
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Include bug report details etc. in the change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200627070147.297535-1-aneesh.kumar@linux.ibm.com
We use OUTPUT directory as TMPOUT for checking no-pie option.
Since commit f2f02ebd8f ("kbuild: improve cc-option to clean up all
temporary files") when building powerpc/ from selftests directory, the
OUTPUT directory points to powerpc/pmu/ebb/ and gets removed when
checking for -no-pie option in try-run routine, subsequently build
fails with the following:
$ make -C powerpc
...
TARGET=ebb; BUILD_TARGET=$OUTPUT/$TARGET; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C $TARGET all
make[2]: Entering directory '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb'
make[2]: *** No rule to make target 'Makefile'.
make[2]: Failed to remake makefile 'Makefile'.
make[2]: *** No rule to make target 'ebb.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'ebb_handler.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'trace.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'busy_loop.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: Target 'all' not remade because of errors.
Fix this by adding a suffix to the OUTPUT directory so that the
failure is avoided.
Fixes: 9686813f6e ("selftests/powerpc: Fix try-run when source tree is not writable")
Signed-off-by: Harish <harish@linux.ibm.com>
[mpe: Mention that commit that triggered the breakage]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200625165721.264904-1-harish@linux.ibm.com
With CONFIG_DEBUG_VIRTUAL=y, __pa() checks for addr value and if it's
less than PAGE_OFFSET it leads to a BUG().
#define __pa(x)
({
VIRTUAL_BUG_ON((unsigned long)(x) < PAGE_OFFSET);
(unsigned long)(x) & 0x0fffffffffffffffUL;
})
kernel BUG at arch/powerpc/kvm/book3s_64_mmu_radix.c:43!
cpu 0x70: Vector: 700 (Program Check) at [c0000018a2187360]
pc: c000000000161b30: __kvmhv_copy_tofrom_guest_radix+0x130/0x1f0
lr: c000000000161d5c: kvmhv_copy_from_guest_radix+0x3c/0x80
...
kvmhv_copy_from_guest_radix+0x3c/0x80
kvmhv_load_from_eaddr+0x48/0xc0
kvmppc_ld+0x98/0x1e0
kvmppc_load_last_inst+0x50/0x90
kvmppc_hv_emulate_mmio+0x288/0x2b0
kvmppc_book3s_radix_page_fault+0xd8/0x2b0
kvmppc_book3s_hv_page_fault+0x37c/0x1050
kvmppc_vcpu_run_hv+0xbb8/0x1080
kvmppc_vcpu_run+0x34/0x50
kvm_arch_vcpu_ioctl_run+0x2fc/0x410
kvm_vcpu_ioctl+0x2b4/0x8f0
ksys_ioctl+0xf4/0x150
sys_ioctl+0x28/0x80
system_call_exception+0x104/0x1d0
system_call_common+0xe8/0x214
kvmhv_copy_tofrom_guest_radix() uses a NULL value for to/from to
indicate direction of copy.
Avoid calling __pa() if the value is NULL to avoid the BUG().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Massage change log a bit to mention CONFIG_DEBUG_VIRTUAL]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611120159.680284-1-aneesh.kumar@linux.ibm.com
Building the current 5.8 kernel for an e500 machine with
CONFIG_RANDOMIZE_BASE=y and CONFIG_BLOCK=n yields the following
failure:
arch/powerpc/mm/nohash/kaslr_booke.c: In function 'kaslr_early_init':
arch/powerpc/mm/nohash/kaslr_booke.c:387:2: error: implicit
declaration of function 'flush_icache_range'; did you mean 'flush_tlb_range'?
Indeed, including asm/cacheflush.h into kaslr_booke.c fixes the build.
Fixes: 2b0e86cc5d ("powerpc/fsl_booke/32: implement KASLR infrastructure")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Acked-by: Scott Wood <oss@buserror.net>
[mpe: Tweak change log to mention CONFIG_BLOCK=n]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200613162801.1946619-1-asolokha@kb.kras.ru
Move ptep_get() close to pte_update(), in an ifdef section already
dedicated to powerpc 8xx. This section contains explanation about
the layout of page table entries.
Also modify it to return 4 times the pte value instead of padding
with zeroes.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9f2df6621fcaf9eba15fadc61c169d0c8e2fb849.1592481938.git.christophe.leroy@csgroup.eu
With hash translation, the hypervisor can hint the LPAR about 16GB contiguous range
via ibm,expected#pages. The kernel marks the range specified in the device tree
as reserved. Avoid doing this when using radix translation. Radix translation
only supports 1G gigantic hugepage and kernel can do the 1G gigantic hugepage
allocation via early memblock reservation. This can be done because with radix
translation pages are not required to be contiguous on the host.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200622064019.16682-1-aneesh.kumar@linux.ibm.com
FIX_EARLY_DEBUG_BASE reserves a 128k area for debuging.
When page size is 256k, the calculation results in a 0 number of
pages, leading to the following failure:
CC arch/powerpc/kernel/asm-offsets.s
In file included from ./arch/powerpc/include/asm/nohash/32/pgtable.h:77:0,
from ./arch/powerpc/include/asm/nohash/pgtable.h:8,
from ./arch/powerpc/include/asm/pgtable.h:20,
from ./include/linux/pgtable.h:6,
from ./arch/powerpc/include/asm/kup.h:42,
from ./arch/powerpc/include/asm/uaccess.h:9,
from ./include/linux/uaccess.h:11,
from ./include/linux/crypto.h:21,
from ./include/crypto/hash.h:11,
from ./include/linux/uio.h:10,
from ./include/linux/socket.h:8,
from ./include/linux/compat.h:15,
from arch/powerpc/kernel/asm-offsets.c:14:
./arch/powerpc/include/asm/fixmap.h:75:2: error: overflow in enumeration values
__end_of_permanent_fixed_addresses,
^
make[2]: *** [arch/powerpc/kernel/asm-offsets.s] Error 1
Ensure the debug area is at least one page.
Fixes: b8e8efaa86 ("powerpc: reserve fixmap entries for early debug")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ca8c9f8249f523b1fab873e67b81b11989d46553.1592207216.git.christophe.leroy@csgroup.eu
Extend the alignment handler selftest to exercise prefixed load store
instructions. Add tests for prefixed VSX, floating point and integer
instructions.
Skip prefix tests if ISA version does not support prefixed instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Tested-by: Alistair Popple <alistair@popple.id.au>
[mpe: Fixup PPC_FEATURE2_ARCH_3_1 naming as noted by Alistair]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520021103.19798-2-jniethe5@gmail.com
Aneesh Kumar K.V